[Paraview] problem building ParaView Examples
Jeff Becker
jeffrey.c.becker at nasa.gov
Mon Jan 12 18:22:40 EST 2015
On 01/12/2015 03:18 PM, Sebastien Jourdain wrote:
> Hum,
>
> That should not really matter root or no-root. But since lot of test
> perform some rendering operations and that we capture that section of
> the screen, we often (on wrongly setup dashboard) see screensaver
> capture instead of the user desktop where the expected rendering is
> actually happening. (Hence my previous comment) Such error provide
> false positive error.
>
> And looking at several tests here:
> https://open.cdash.org/viewTest.php?onlyfailed&buildid=3650082
> I've notice the same captured image.
>
> When you run "ctest -D Experimental", do you see flashing windows
> poping up with that image?
> Or do they seems to be somewhat valid?
> If you try again, try to see if you can disable the screensaver
> altogether.
OK - Now I think I know what happened. I started the test and went to
lunch. Hence my screen locked, and that may have interfered. I'll run it
again and watch it. Thanks.
-jeff
>
> Seb
>
>
> On Mon, Jan 12, 2015 at 3:51 PM, Jeff Becker
> <jeffrey.c.becker at nasa.gov <mailto:jeffrey.c.becker at nasa.gov>> wrote:
>
> On 01/12/2015 02:38 PM, Sebastien Jourdain wrote:
>> Do you know if that picture come from your screensaver or
>> anything else?
>> It seems to be the picture that get captured regardless of the
>> test that ran and failed.
>>
> I don't recognize it.
>
> I was thinking that it might be a permission issue. I could try
> running the tests as root.... Would that help? Thanks.
>
> -jeff
>
>
>>
>>
>> On Mon, Jan 12, 2015 at 2:46 PM, Jeff Becker
>> <jeffrey.c.becker at nasa.gov <mailto:jeffrey.c.becker at nasa.gov>> wrote:
>>
>> On 01/12/2015 01:38 PM, Utkarsh Ayachit wrote:
>>
>> That's more from before! :).
>>
>>
>> I assume you meant more "than" before?
>>
>> Anything funky about the X configuration?
>>
>>
>> What should I look for?
>>
>> Looks like the framebuffer grabs end up capturing ghost
>> images.
>>
>>
>> -jeff
>>
>>
>> Utkarsh
>>
>> On Mon, Jan 12, 2015 at 1:28 PM, Jeff Becker
>> <jeffrey.c.becker at nasa.gov
>> <mailto:jeffrey.c.becker at nasa.gov>> wrote:
>>
>> On 01/12/2015 11:39 AM, Utkarsh Ayachit wrote:
>>
>> Mind doing a "ctest -D Experimental"? That'll
>> submit the test results
>> to the ParaView dashboard [1] and will provide
>> use more information as
>> to why those tests failed.
>>
>>
>> Done. 996 tests failed (see website below). Thanks.
>>
>> -jeff
>>
>> [1] https://open.cdash.org/index.php?project=ParaView
>>
>> On Mon, Jan 12, 2015 at 11:37 AM, Jeff Becker
>> <jeffrey.c.becker at nasa.gov
>> <mailto:jeffrey.c.becker at nasa.gov>>
>> wrote:
>>
>> On 01/12/2015 10:47 AM, Jeff Becker wrote:
>>
>> On 01/10/2015 04:39 PM, Utkarsh Ayachit wrote:
>>
>> Not sure what's the issue. I tested out in my
>> build and seems to work as
>> expected. Mind attaching your CMakeCache.txt
>> file? Did you by any chance
>> turn on PARAVIEW_USE_UNIFIED_BINDINGS cmake flag?
>>
>>
>> Yes. I turned that off, and now it builds
>> fine. Thanks.
>>
>>
>> I tried 'make test' and got:
>>
>> 97% tests passed, 47 tests failed out of 1499
>>
>> Failed tests listed below. Do I need to worry
>> about these, and if so, how
>> to
>> fix?
>>
>> Thanks.
>>
>> -jeff
>>
>> The following tests FAILED:
>> 1 - pv.TestDevelopmentInstall (Failed)
>> 73 -
>> vtkPVVTKExtensionsDefault-HeaderTest (Failed)
>> 688 -
>> vtkIONetCDFPython-NetCDFCF2DBounds (Failed)
>> 779 -
>> vtkPVServerManagerDefaultPython-MultiView
>> (Failed)
>> 786 -
>> vtkPVServerManagerDefaultPython-SymmetricMultiView
>> (Failed)
>> 1026 -
>> vtkRenderingVolumeCxx-TestGPUVolumeRayCastMapperWindowLevel
>> (Failed)
>> 1103 - pv.FileSeries (Failed)
>> 1104 - pv.HistogramSelection (Failed)
>> 1119 - pv.FindDataDialog (Failed)
>> 1136 - pv.AnimatePipelineTime (Failed)
>> 1140 - pv.CameraLink (Failed)
>> 1142 - pv.CheckableHeader (Failed)
>> 1165 - pv.FFTOverTime (Failed)
>> 1178 - pv.NormalGlyphs (Failed)
>> 1186 - pv.PlotOverTimeAutoApply (Failed)
>> 1211 - pv.TemporalInterpolator (Failed)
>> 1218 - pv.UndoRedo2 (Failed)
>> 1230 - pv.SelectionLabels (Failed)
>> 1234 - pv.TraceSupplementalProxiesFully
>> (Failed)
>> 1252 - pvcs.CameraLink (Failed)
>> 1254 - pvcs.CheckableHeader (Failed)
>> 1275 - pvcs.FFTOverTime (Failed)
>> 1279 - pvcs.ImageVolumeRendering (Failed)
>> 1293 - pvcs.PlotOverTimeAutoApply (Failed)
>> 1301 - pvcs.PropertyLink (Failed)
>> 1317 - pvcs.TensorGlyph (Failed)
>> 1318 - pvcs.TemporalInterpolator (Failed)
>> 1325 - pvcs.UndoRedo2 (Failed)
>> 1340 -
>> pvcs.TraceSupplementalProxiesFully (Failed)
>> 1346 - pvcs.HistogramSelection (Failed)
>> 1351 - pvcs.NonlinearSubdivisionDisplay
>> (Failed)
>> 1360 - pvcs.FindDataDialog (Failed)
>> 1376 - pvcrs.CameraLink (Failed)
>> 1378 - pvcrs.CheckableHeader (Failed)
>> 1384 - pvcrs.ComparativeVisPanel (Failed)
>> 1415 - pvcrs.PropertyLink (Failed)
>> 1418 - pvcrs.RepresentationSelector
>> (Failed)
>> 1420 - pvcrs.SaveCSV (Failed)
>> 1422 - pvcrs.SimpleInteraction (Failed)
>> 1424 - pvcrs.SliceAlongPolyline (Failed)
>> 1426 - pvcrs.SpreadSheet2 (Failed)
>> 1430 - pvcrs.TabbedViews (Failed)
>> 1432 - pvcrs.TemporalInterpolator (Failed)
>> 1439 - pvcrs.UndoRedo2 (Failed)
>> 1453 -
>> pvcrs.TraceSupplementalProxiesFully (Failed)
>> 1458 - pvcrs.HistogramSelection (Failed)
>> 1469 - pvcrs.FindDataDialog (Failed)
>> Errors while running CTest
>> make: *** [test] Error 8
>>
>>
>>
>>
>> -jeff
>>
>>
>> Utkarsh
>>
>> On Fri, Jan 9, 2015 at 3:46 PM, Jeff Becker
>> <jeffrey.c.becker at nasa.gov
>> <mailto:jeffrey.c.becker at nasa.gov>>
>> wrote:
>>
>> Almost there - make output below. Any
>> ideas? Thanks.
>>
>> -jeff
>>
>> Scanning dependencies of target
>> ParaViewExamples
>> [ 80%] Build examples as a separate project
>> Not searching for unused variables given
>> on the command line.
>> Not searching for unused variables given
>> on the command line.
>> Internal cmake changing into directory:
>> /u/wk/jcbecker/ParaView-build/Examples/All
>> ======== CMake output ======
>> The C compiler identification is GNU 4.4.7
>> The CXX compiler identification is GNU 4.4.7
>> Check for working C compiler: /usr/bin/cc
>> Configuring
>> Check for working C compiler: /usr/bin/cc
>> -- works
>> Detecting C compiler ABI info
>> Configuring
>> Detecting C compiler ABI info - done
>> Check for working CXX compiler: /usr/bin/c++
>> Configuring
>> Check for working CXX compiler:
>> /usr/bin/c++ -- works
>> Detecting CXX compiler ABI info
>> Configuring
>> Detecting CXX compiler ABI info - done
>> Looking for Q_WS_X11
>> Configuring
>> Looking for Q_WS_X11 - found
>> Looking for Q_WS_WIN
>> Configuring
>> Looking for Q_WS_WIN - not found
>> Looking for Q_WS_QWS
>> Configuring
>> Looking for Q_WS_QWS - not found
>> Looking for Q_WS_MAC
>> Configuring
>> Looking for Q_WS_MAC - not found
>> Found Qt4:
>> /usr/local/Trolltech/Qt-4.8.6/bin/qmake
>> (found version
>> "4.8.6")
>> Configuring
>> Found Qt4:
>> /usr/local/Trolltech/Qt-4.8.6/bin/qmake
>> (found version
>> "4.8.6")
>> Configuring
>> Configuring
>> Configuring
>> Configuring
>> Configuring
>> Configuring
>> Configuring
>> Configuring
>> Configuring
>> Configuring
>> Configuring
>> Configuring
>> Configuring
>> Configuring
>> Configuring
>> Configuring
>> Configuring
>> Configuring
>> Configuring
>> Configuring
>> Configuring
>> Configuring
>> Configuring
>> Configuring
>> Configuring
>> Configuring
>> Configuring
>> Configuring
>> Configuring
>> Configuring
>> Configuring
>> Configuring
>> Configuring
>> Configuring
>> Configuring
>> Configuring
>> Configuring
>> Configuring
>> Configuring
>> Configuring
>> Configuring
>> Configuring
>> Configuring done
>> Generating
>> Generating
>> Generating
>> Generating
>> Generating
>> Generating
>> Generating
>> Generating
>> Generating
>> Generating
>> Generating
>> Generating
>> Generating
>> Generating
>> Generating
>> Generating
>> Generating
>> Generating
>> Generating
>> Generating
>> Generating
>> Generating
>> Generating done
>> Build files have been written to:
>> /u/wk/jcbecker/ParaView-build/Examples/All
>> Found Qt4:
>> /usr/local/Trolltech/Qt-4.8.6/bin/qmake
>> (found version
>> "4.8.6")
>> Configuring
>> Found Qt4:
>> /usr/local/Trolltech/Qt-4.8.6/bin/qmake
>> (found version
>> "4.8.6")
>> Configuring
>> Configuring
>> Configuring
>> Configuring
>> Configuring
>> Configuring
>> Configuring
>> Configuring
>> Configuring
>> Configuring
>> Configuring
>> Configuring
>> Configuring
>> Configuring
>> Configuring
>> Configuring
>> Configuring
>> Configuring
>> Configuring
>> Configuring
>> Configuring
>> Configuring
>> Configuring
>> Configuring
>> Configuring
>> Configuring
>> Configuring
>> Configuring
>> Configuring
>> Configuring
>> Configuring
>> Configuring
>> Configuring
>> Configuring
>> Configuring
>> Configuring
>> Configuring
>> Configuring
>> Configuring
>> Configuring
>> Configuring
>> Configuring
>> Configuring done
>> Generating
>> Generating
>> Generating
>> Generating
>> Generating
>> Generating
>> Generating
>> Generating
>> Generating
>> Generating
>> Generating
>> Generating
>> Generating
>> Generating
>> Generating
>> Generating
>> Generating
>> Generating
>> Generating
>> Generating
>> Generating
>> Generating
>> Generating done
>> Build files have been written to:
>> /u/wk/jcbecker/ParaView-build/Examples/All
>> ======== End CMake output ======
>> Change Dir:
>> /u/wk/jcbecker/ParaView-build/Examples/All
>>
>> Run Build Command:/usr/bin/gmake
>> gmake[3]: Entering directory
>> `/u/wk/jcbecker/ParaView-build/Examples/All'
>> gmake[4]: Entering directory
>> `/u/wk/jcbecker/ParaView-build/Examples/All'
>> gmake[5]: Entering directory
>> `/u/wk/jcbecker/ParaView-build/Examples/All'
>> [ 1%] Generating Documentation HTMLs
>> from xmls
>> Processing wiki sources
>> Processing wiki filters
>> Processing wiki writers
>> Processing wiki readers
>> [ 1%] Compiling Qt help project
>> SMMyElevation.qhp
>> Building up file structure...
>> Insert custom filters...
>> Insert help data for filter section (1 of
>> 1)...
>> Insert files...
>> Warning: The file
>> /u/wk/jcbecker/ParaView-build/Examples/All/Plugins/Filter/doc/*.css
>> does
>> not
>> exist! Skipping it.
>> Warning: The file
>> /u/wk/jcbecker/ParaView-build/Examples/All/Plugins/Filter/doc/*.png
>> does
>> not
>> exist! Skipping it.
>> Warning: The file
>> /u/wk/jcbecker/ParaView-build/Examples/All/Plugins/Filter/doc/*.jpg
>> does
>> not
>> exist! Skipping it.
>> Insert contents...
>> Insert indices...
>> Documentation successfully generated.
>> [ 2%] Generating SMMyElevation_doc.h
>> -- Generate module: SMMyElevation
>> gmake[5]: *** No rule to make target
>> `/u/wk/jcbecker/ParaView-build/bin/vtkWrapClientServer-pv4.3',
>> needed by
>> `Plugins/Filter/vtkMyElevationFilterClientServer.cxx'.
>> Stop.
>> gmake[5]: Leaving directory
>> `/u/wk/jcbecker/ParaView-build/Examples/All'
>> gmake[4]: ***
>> [Plugins/Filter/CMakeFiles/SMMyElevation.dir/all]
>> Error 2
>> gmake[4]: Leaving directory
>> `/u/wk/jcbecker/ParaView-build/Examples/All'
>> gmake[3]: *** [all] Error 2
>> gmake[3]: Leaving directory
>> `/u/wk/jcbecker/ParaView-build/Examples/All'
>> make[2]: *** [ParaViewExamples.done] Error 1
>> make[1]: ***
>> [CMakeFiles/ParaViewExamples.dir/all] Error 2
>> make: *** [all] Error 2
>>
>> _______________________________________________
>> Powered by www.kitware.com
>> <http://www.kitware.com>
>>
>> Visit other Kitware open-source projects at
>> http://www.kitware.com/opensource/opensource.html
>>
>> Please keep messages on-topic and check
>> the ParaView Wiki at:
>> http://paraview.org/Wiki/ParaView
>>
>> Search the list archives at:
>> http://markmail.org/search/?q=ParaView
>>
>> Follow this link to subscribe/unsubscribe:
>> http://public.kitware.com/mailman/listinfo/paraview
>>
>>
>>
>>
>>
>> _______________________________________________
>> Powered by www.kitware.com
>> <http://www.kitware.com>
>>
>> Visit other Kitware open-source projects at
>> http://www.kitware.com/opensource/opensource.html
>>
>> Please keep messages on-topic and check the
>> ParaView Wiki at:
>> http://paraview.org/Wiki/ParaView
>>
>> Search the list archives at:
>> http://markmail.org/search/?q=ParaView
>>
>> Follow this link to subscribe/unsubscribe:
>> http://public.kitware.com/mailman/listinfo/paraview
>>
>>
>> _______________________________________________
>> Powered by www.kitware.com <http://www.kitware.com>
>>
>> Visit other Kitware open-source projects at
>> http://www.kitware.com/opensource/opensource.html
>>
>> Please keep messages on-topic and check the ParaView Wiki at:
>> http://paraview.org/Wiki/ParaView
>>
>> Search the list archives at:
>> http://markmail.org/search/?q=ParaView
>>
>> Follow this link to subscribe/unsubscribe:
>> http://public.kitware.com/mailman/listinfo/paraview
>>
>>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://public.kitware.com/pipermail/paraview/attachments/20150112/bbf41c82/attachment.html>
More information about the ParaView
mailing list