[Paraview] problem building ParaView Examples

Sebastien Jourdain sebastien.jourdain at kitware.com
Mon Jan 12 18:18:06 EST 2015 

Hum,

That should not really matter root or no-root. But since lot of test
perform some rendering operations and that we capture that section of the
screen, we often (on wrongly setup dashboard) see screensaver capture
instead of the user desktop where the expected rendering is actually
happening. (Hence my previous comment) Such error provide false positive
error.

And looking at several tests here:
https://open.cdash.org/viewTest.php?onlyfailed&buildid=3650082
I've notice the same captured image.

When you run "ctest -D Experimental", do you see flashing windows poping up
with that image?
Or do they seems to be somewhat valid?
If you try again, try to see if you can disable the screensaver altogether.

Seb


On Mon, Jan 12, 2015 at 3:51 PM, Jeff Becker <jeffrey.c.becker at nasa.gov>
wrote:

>  On 01/12/2015 02:38 PM, Sebastien Jourdain wrote:
>
>  Do you know if that picture come from your screensaver or anything else?
>  It seems to be the picture that get captured regardless of the test that
> ran and failed.
>
>   I don't recognize it.
>
> I was thinking that it might be a permission issue. I could try running
> the tests as root.... Would that help? Thanks.
>
> -jeff
>
>
>
>
> On Mon, Jan 12, 2015 at 2:46 PM, Jeff Becker <jeffrey.c.becker at nasa.gov>
> wrote:
>
>> On 01/12/2015 01:38 PM, Utkarsh Ayachit wrote:
>>
>>> That's more from before! :).
>>>
>>
>>  I assume you meant more "than" before?
>>
>>  Anything funky about the X configuration?
>>>
>>
>>  What should I look for?
>>
>>> Looks like the framebuffer grabs end up capturing ghost images.
>>>
>>
>>  -jeff
>>
>>
>>> Utkarsh
>>>
>>> On Mon, Jan 12, 2015 at 1:28 PM, Jeff Becker <jeffrey.c.becker at nasa.gov>
>>> wrote:
>>>
>>>> On 01/12/2015 11:39 AM, Utkarsh Ayachit wrote:
>>>>
>>>>> Mind doing a "ctest -D Experimental"? That'll submit the test results
>>>>> to the ParaView dashboard [1] and will provide use more information as
>>>>> to why those tests failed.
>>>>>
>>>>
>>>> Done. 996 tests failed (see website below). Thanks.
>>>>
>>>> -jeff
>>>>
>>>>  [1] https://open.cdash.org/index.php?project=ParaView
>>>>>
>>>>> On Mon, Jan 12, 2015 at 11:37 AM, Jeff Becker <
>>>>> jeffrey.c.becker at nasa.gov>
>>>>> wrote:
>>>>>
>>>>>> On 01/12/2015 10:47 AM, Jeff Becker wrote:
>>>>>>
>>>>>> On 01/10/2015 04:39 PM, Utkarsh Ayachit wrote:
>>>>>>
>>>>>> Not sure what's the issue. I tested out in my build and seems to work
>>>>>> as
>>>>>> expected. Mind attaching your CMakeCache.txt file? Did you by any
>>>>>> chance
>>>>>> turn on PARAVIEW_USE_UNIFIED_BINDINGS cmake flag?
>>>>>>
>>>>>>
>>>>>> Yes. I turned that off, and now it builds fine. Thanks.
>>>>>>
>>>>>>
>>>>>> I tried 'make test' and got:
>>>>>>
>>>>>> 97% tests passed, 47 tests failed out of 1499
>>>>>>
>>>>>> Failed tests listed below. Do I need to worry about these, and if so,
>>>>>> how
>>>>>> to
>>>>>> fix?
>>>>>>
>>>>>> Thanks.
>>>>>>
>>>>>> -jeff
>>>>>>
>>>>>> The following tests FAILED:
>>>>>>         1 - pv.TestDevelopmentInstall (Failed)
>>>>>>        73 - vtkPVVTKExtensionsDefault-HeaderTest (Failed)
>>>>>>       688 - vtkIONetCDFPython-NetCDFCF2DBounds (Failed)
>>>>>>       779 - vtkPVServerManagerDefaultPython-MultiView (Failed)
>>>>>>       786 - vtkPVServerManagerDefaultPython-SymmetricMultiView
>>>>>> (Failed)
>>>>>>       1026 -
>>>>>> vtkRenderingVolumeCxx-TestGPUVolumeRayCastMapperWindowLevel
>>>>>> (Failed)
>>>>>>       1103 - pv.FileSeries (Failed)
>>>>>>       1104 - pv.HistogramSelection (Failed)
>>>>>>       1119 - pv.FindDataDialog (Failed)
>>>>>>       1136 - pv.AnimatePipelineTime (Failed)
>>>>>>       1140 - pv.CameraLink (Failed)
>>>>>>       1142 - pv.CheckableHeader (Failed)
>>>>>>       1165 - pv.FFTOverTime (Failed)
>>>>>>       1178 - pv.NormalGlyphs (Failed)
>>>>>>       1186 - pv.PlotOverTimeAutoApply (Failed)
>>>>>>       1211 - pv.TemporalInterpolator (Failed)
>>>>>>       1218 - pv.UndoRedo2 (Failed)
>>>>>>       1230 - pv.SelectionLabels (Failed)
>>>>>>       1234 - pv.TraceSupplementalProxiesFully (Failed)
>>>>>>       1252 - pvcs.CameraLink (Failed)
>>>>>>       1254 - pvcs.CheckableHeader (Failed)
>>>>>>       1275 - pvcs.FFTOverTime (Failed)
>>>>>>       1279 - pvcs.ImageVolumeRendering (Failed)
>>>>>>       1293 - pvcs.PlotOverTimeAutoApply (Failed)
>>>>>>       1301 - pvcs.PropertyLink (Failed)
>>>>>>       1317 - pvcs.TensorGlyph (Failed)
>>>>>>       1318 - pvcs.TemporalInterpolator (Failed)
>>>>>>       1325 - pvcs.UndoRedo2 (Failed)
>>>>>>       1340 - pvcs.TraceSupplementalProxiesFully (Failed)
>>>>>>       1346 - pvcs.HistogramSelection (Failed)
>>>>>>       1351 - pvcs.NonlinearSubdivisionDisplay (Failed)
>>>>>>       1360 - pvcs.FindDataDialog (Failed)
>>>>>>       1376 - pvcrs.CameraLink (Failed)
>>>>>>       1378 - pvcrs.CheckableHeader (Failed)
>>>>>>       1384 - pvcrs.ComparativeVisPanel (Failed)
>>>>>>       1415 - pvcrs.PropertyLink (Failed)
>>>>>>       1418 - pvcrs.RepresentationSelector (Failed)
>>>>>>       1420 - pvcrs.SaveCSV (Failed)
>>>>>>       1422 - pvcrs.SimpleInteraction (Failed)
>>>>>>       1424 - pvcrs.SliceAlongPolyline (Failed)
>>>>>>       1426 - pvcrs.SpreadSheet2 (Failed)
>>>>>>       1430 - pvcrs.TabbedViews (Failed)
>>>>>>       1432 - pvcrs.TemporalInterpolator (Failed)
>>>>>>       1439 - pvcrs.UndoRedo2 (Failed)
>>>>>>       1453 - pvcrs.TraceSupplementalProxiesFully (Failed)
>>>>>>       1458 - pvcrs.HistogramSelection (Failed)
>>>>>>       1469 - pvcrs.FindDataDialog (Failed)
>>>>>> Errors while running CTest
>>>>>> make: *** [test] Error 8
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> -jeff
>>>>>>
>>>>>>
>>>>>> Utkarsh
>>>>>>
>>>>>> On Fri, Jan 9, 2015 at 3:46 PM, Jeff Becker <
>>>>>> jeffrey.c.becker at nasa.gov>
>>>>>> wrote:
>>>>>>
>>>>>>> Almost there - make output below. Any ideas? Thanks.
>>>>>>>
>>>>>>> -jeff
>>>>>>>
>>>>>>> Scanning dependencies of target ParaViewExamples
>>>>>>> [ 80%] Build examples as a separate project
>>>>>>> Not searching for unused variables given on the command line.
>>>>>>> Not searching for unused variables given on the command line.
>>>>>>> Internal cmake changing into directory:
>>>>>>> /u/wk/jcbecker/ParaView-build/Examples/All
>>>>>>> ======== CMake output     ======
>>>>>>> The C compiler identification is GNU 4.4.7
>>>>>>> The CXX compiler identification is GNU 4.4.7
>>>>>>> Check for working C compiler: /usr/bin/cc
>>>>>>> Configuring
>>>>>>> Check for working C compiler: /usr/bin/cc -- works
>>>>>>> Detecting C compiler ABI info
>>>>>>> Configuring
>>>>>>> Detecting C compiler ABI info - done
>>>>>>> Check for working CXX compiler: /usr/bin/c++
>>>>>>> Configuring
>>>>>>> Check for working CXX compiler: /usr/bin/c++ -- works
>>>>>>> Detecting CXX compiler ABI info
>>>>>>> Configuring
>>>>>>> Detecting CXX compiler ABI info - done
>>>>>>> Looking for Q_WS_X11
>>>>>>> Configuring
>>>>>>> Looking for Q_WS_X11 - found
>>>>>>> Looking for Q_WS_WIN
>>>>>>> Configuring
>>>>>>> Looking for Q_WS_WIN - not found
>>>>>>> Looking for Q_WS_QWS
>>>>>>> Configuring
>>>>>>> Looking for Q_WS_QWS - not found
>>>>>>> Looking for Q_WS_MAC
>>>>>>> Configuring
>>>>>>> Looking for Q_WS_MAC - not found
>>>>>>> Found Qt4: /usr/local/Trolltech/Qt-4.8.6/bin/qmake (found version
>>>>>>> "4.8.6")
>>>>>>> Configuring
>>>>>>> Found Qt4: /usr/local/Trolltech/Qt-4.8.6/bin/qmake (found version
>>>>>>> "4.8.6")
>>>>>>> Configuring
>>>>>>> Configuring
>>>>>>> Configuring
>>>>>>> Configuring
>>>>>>> Configuring
>>>>>>> Configuring
>>>>>>> Configuring
>>>>>>> Configuring
>>>>>>> Configuring
>>>>>>> Configuring
>>>>>>> Configuring
>>>>>>> Configuring
>>>>>>> Configuring
>>>>>>> Configuring
>>>>>>> Configuring
>>>>>>> Configuring
>>>>>>> Configuring
>>>>>>> Configuring
>>>>>>> Configuring
>>>>>>> Configuring
>>>>>>> Configuring
>>>>>>> Configuring
>>>>>>> Configuring
>>>>>>> Configuring
>>>>>>> Configuring
>>>>>>> Configuring
>>>>>>> Configuring
>>>>>>> Configuring
>>>>>>> Configuring
>>>>>>> Configuring
>>>>>>> Configuring
>>>>>>> Configuring
>>>>>>> Configuring
>>>>>>> Configuring
>>>>>>> Configuring
>>>>>>> Configuring
>>>>>>> Configuring
>>>>>>> Configuring
>>>>>>> Configuring
>>>>>>> Configuring
>>>>>>> Configuring
>>>>>>> Configuring
>>>>>>> Configuring done
>>>>>>> Generating
>>>>>>> Generating
>>>>>>> Generating
>>>>>>> Generating
>>>>>>> Generating
>>>>>>> Generating
>>>>>>> Generating
>>>>>>> Generating
>>>>>>> Generating
>>>>>>> Generating
>>>>>>> Generating
>>>>>>> Generating
>>>>>>> Generating
>>>>>>> Generating
>>>>>>> Generating
>>>>>>> Generating
>>>>>>> Generating
>>>>>>> Generating
>>>>>>> Generating
>>>>>>> Generating
>>>>>>> Generating
>>>>>>> Generating
>>>>>>> Generating done
>>>>>>> Build files have been written to:
>>>>>>> /u/wk/jcbecker/ParaView-build/Examples/All
>>>>>>> Found Qt4: /usr/local/Trolltech/Qt-4.8.6/bin/qmake (found version
>>>>>>> "4.8.6")
>>>>>>> Configuring
>>>>>>> Found Qt4: /usr/local/Trolltech/Qt-4.8.6/bin/qmake (found version
>>>>>>> "4.8.6")
>>>>>>> Configuring
>>>>>>> Configuring
>>>>>>> Configuring
>>>>>>> Configuring
>>>>>>> Configuring
>>>>>>> Configuring
>>>>>>> Configuring
>>>>>>> Configuring
>>>>>>> Configuring
>>>>>>> Configuring
>>>>>>> Configuring
>>>>>>> Configuring
>>>>>>> Configuring
>>>>>>> Configuring
>>>>>>> Configuring
>>>>>>> Configuring
>>>>>>> Configuring
>>>>>>> Configuring
>>>>>>> Configuring
>>>>>>> Configuring
>>>>>>> Configuring
>>>>>>> Configuring
>>>>>>> Configuring
>>>>>>> Configuring
>>>>>>> Configuring
>>>>>>> Configuring
>>>>>>> Configuring
>>>>>>> Configuring
>>>>>>> Configuring
>>>>>>> Configuring
>>>>>>> Configuring
>>>>>>> Configuring
>>>>>>> Configuring
>>>>>>> Configuring
>>>>>>> Configuring
>>>>>>> Configuring
>>>>>>> Configuring
>>>>>>> Configuring
>>>>>>> Configuring
>>>>>>> Configuring
>>>>>>> Configuring
>>>>>>> Configuring
>>>>>>> Configuring done
>>>>>>> Generating
>>>>>>> Generating
>>>>>>> Generating
>>>>>>> Generating
>>>>>>> Generating
>>>>>>> Generating
>>>>>>> Generating
>>>>>>> Generating
>>>>>>> Generating
>>>>>>> Generating
>>>>>>> Generating
>>>>>>> Generating
>>>>>>> Generating
>>>>>>> Generating
>>>>>>> Generating
>>>>>>> Generating
>>>>>>> Generating
>>>>>>> Generating
>>>>>>> Generating
>>>>>>> Generating
>>>>>>> Generating
>>>>>>> Generating
>>>>>>> Generating done
>>>>>>> Build files have been written to:
>>>>>>> /u/wk/jcbecker/ParaView-build/Examples/All
>>>>>>> ======== End CMake output ======
>>>>>>> Change Dir: /u/wk/jcbecker/ParaView-build/Examples/All
>>>>>>>
>>>>>>> Run Build Command:/usr/bin/gmake
>>>>>>> gmake[3]: Entering directory
>>>>>>> `/u/wk/jcbecker/ParaView-build/Examples/All'
>>>>>>> gmake[4]: Entering directory
>>>>>>> `/u/wk/jcbecker/ParaView-build/Examples/All'
>>>>>>> gmake[5]: Entering directory
>>>>>>> `/u/wk/jcbecker/ParaView-build/Examples/All'
>>>>>>> [  1%] Generating Documentation HTMLs from xmls
>>>>>>> Processing wiki sources
>>>>>>> Processing wiki filters
>>>>>>> Processing wiki writers
>>>>>>> Processing wiki readers
>>>>>>> [  1%] Compiling Qt help project SMMyElevation.qhp
>>>>>>> Building up file structure...
>>>>>>> Insert custom filters...
>>>>>>> Insert help data for filter section (1 of 1)...
>>>>>>> Insert files...
>>>>>>> Warning: The file
>>>>>>> /u/wk/jcbecker/ParaView-build/Examples/All/Plugins/Filter/doc/*.css
>>>>>>> does
>>>>>>> not
>>>>>>> exist! Skipping it.
>>>>>>> Warning: The file
>>>>>>> /u/wk/jcbecker/ParaView-build/Examples/All/Plugins/Filter/doc/*.png
>>>>>>> does
>>>>>>> not
>>>>>>> exist! Skipping it.
>>>>>>> Warning: The file
>>>>>>> /u/wk/jcbecker/ParaView-build/Examples/All/Plugins/Filter/doc/*.jpg
>>>>>>> does
>>>>>>> not
>>>>>>> exist! Skipping it.
>>>>>>> Insert contents...
>>>>>>> Insert indices...
>>>>>>> Documentation successfully generated.
>>>>>>> [  2%] Generating SMMyElevation_doc.h
>>>>>>> -- Generate module: SMMyElevation
>>>>>>> gmake[5]: *** No rule to make target
>>>>>>> `/u/wk/jcbecker/ParaView-build/bin/vtkWrapClientServer-pv4.3',
>>>>>>> needed by
>>>>>>> `Plugins/Filter/vtkMyElevationFilterClientServer.cxx'. Stop.
>>>>>>> gmake[5]: Leaving directory
>>>>>>> `/u/wk/jcbecker/ParaView-build/Examples/All'
>>>>>>> gmake[4]: *** [Plugins/Filter/CMakeFiles/SMMyElevation.dir/all]
>>>>>>> Error 2
>>>>>>> gmake[4]: Leaving directory
>>>>>>> `/u/wk/jcbecker/ParaView-build/Examples/All'
>>>>>>> gmake[3]: *** [all] Error 2
>>>>>>> gmake[3]: Leaving directory
>>>>>>> `/u/wk/jcbecker/ParaView-build/Examples/All'
>>>>>>> make[2]: *** [ParaViewExamples.done] Error 1
>>>>>>> make[1]: *** [CMakeFiles/ParaViewExamples.dir/all] Error 2
>>>>>>> make: *** [all] Error 2
>>>>>>>
>>>>>>> _______________________________________________
>>>>>>> Powered by www.kitware.com
>>>>>>>
>>>>>>> Visit other Kitware open-source projects at
>>>>>>> http://www.kitware.com/opensource/opensource.html
>>>>>>>
>>>>>>> Please keep messages on-topic and check the ParaView Wiki at:
>>>>>>> http://paraview.org/Wiki/ParaView
>>>>>>>
>>>>>>> Search the list archives at: http://markmail.org/search/?q=ParaView
>>>>>>>
>>>>>>> Follow this link to subscribe/unsubscribe:
>>>>>>> http://public.kitware.com/mailman/listinfo/paraview
>>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> _______________________________________________
>>>>>> Powered by www.kitware.com
>>>>>>
>>>>>> Visit other Kitware open-source projects at
>>>>>> http://www.kitware.com/opensource/opensource.html
>>>>>>
>>>>>> Please keep messages on-topic and check the ParaView Wiki at:
>>>>>> http://paraview.org/Wiki/ParaView
>>>>>>
>>>>>> Search the list archives at: http://markmail.org/search/?q=ParaView
>>>>>>
>>>>>> Follow this link to subscribe/unsubscribe:
>>>>>> http://public.kitware.com/mailman/listinfo/paraview
>>>>>>
>>>>>>
>> _______________________________________________
>> Powered by www.kitware.com
>>
>> Visit other Kitware open-source projects at
>> http://www.kitware.com/opensource/opensource.html
>>
>> Please keep messages on-topic and check the ParaView Wiki at:
>> http://paraview.org/Wiki/ParaView
>>
>> Search the list archives at: http://markmail.org/search/?q=ParaView
>>
>> Follow this link to subscribe/unsubscribe:
>> http://public.kitware.com/mailman/listinfo/paraview
>>
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://public.kitware.com/pipermail/paraview/attachments/20150112/bf0f4034/attachment.html>

More information about the ParaView mailing list