[Paraview] problem building ParaView Examples
Jeff Becker
jeffrey.c.becker at nasa.gov
Mon Jan 12 19:11:33 EST 2015
Resubmitted "ctest -D Experimental"
On 01/12/2015 03:22 PM, Jeff Becker wrote:
> On 01/12/2015 03:18 PM, Sebastien Jourdain wrote:
>> Hum,
>>
>> That should not really matter root or no-root. But since lot of test
>> perform some rendering operations and that we capture that section of
>> the screen, we often (on wrongly setup dashboard) see screensaver
>> capture instead of the user desktop where the expected rendering is
>> actually happening. (Hence my previous comment) Such error provide
>> false positive error.
>>
>> And looking at several tests here:
>> https://open.cdash.org/viewTest.php?onlyfailed&buildid=3650082
>> I've notice the same captured image.
>>
>> When you run "ctest -D Experimental", do you see flashing windows
>> poping up with that image?
>> Or do they seems to be somewhat valid?
>> If you try again, try to see if you can disable the screensaver
>> altogether.
>
> OK - Now I think I know what happened. I started the test and went to
> lunch. Hence my screen locked, and that may have interfered. I'll run
> it again and watch it. Thanks.
>
> -jeff
>
>>
>> Seb
>>
>>
>> On Mon, Jan 12, 2015 at 3:51 PM, Jeff Becker
>> <jeffrey.c.becker at nasa.gov <mailto:jeffrey.c.becker at nasa.gov>> wrote:
>>
>> On 01/12/2015 02:38 PM, Sebastien Jourdain wrote:
>>> Do you know if that picture come from your screensaver or
>>> anything else?
>>> It seems to be the picture that get captured regardless of the
>>> test that ran and failed.
>>>
>> I don't recognize it.
>>
>> I was thinking that it might be a permission issue. I could try
>> running the tests as root.... Would that help? Thanks.
>>
>> -jeff
>>
>>
>>>
>>>
>>> On Mon, Jan 12, 2015 at 2:46 PM, Jeff Becker
>>> <jeffrey.c.becker at nasa.gov <mailto:jeffrey.c.becker at nasa.gov>>
>>> wrote:
>>>
>>> On 01/12/2015 01:38 PM, Utkarsh Ayachit wrote:
>>>
>>> That's more from before! :).
>>>
>>>
>>> I assume you meant more "than" before?
>>>
>>> Anything funky about the X configuration?
>>>
>>>
>>> What should I look for?
>>>
>>> Looks like the framebuffer grabs end up capturing ghost
>>> images.
>>>
>>>
>>> -jeff
>>>
>>>
>>> Utkarsh
>>>
>>> On Mon, Jan 12, 2015 at 1:28 PM, Jeff Becker
>>> <jeffrey.c.becker at nasa.gov
>>> <mailto:jeffrey.c.becker at nasa.gov>> wrote:
>>>
>>> On 01/12/2015 11:39 AM, Utkarsh Ayachit wrote:
>>>
>>> Mind doing a "ctest -D Experimental"? That'll
>>> submit the test results
>>> to the ParaView dashboard [1] and will provide
>>> use more information as
>>> to why those tests failed.
>>>
>>>
>>> Done. 996 tests failed (see website below). Thanks.
>>>
>>> -jeff
>>>
>>> [1]
>>> https://open.cdash.org/index.php?project=ParaView
>>>
>>> On Mon, Jan 12, 2015 at 11:37 AM, Jeff Becker
>>> <jeffrey.c.becker at nasa.gov
>>> <mailto:jeffrey.c.becker at nasa.gov>>
>>> wrote:
>>>
>>> On 01/12/2015 10:47 AM, Jeff Becker wrote:
>>>
>>> On 01/10/2015 04:39 PM, Utkarsh Ayachit wrote:
>>>
>>> Not sure what's the issue. I tested out in
>>> my build and seems to work as
>>> expected. Mind attaching your CMakeCache.txt
>>> file? Did you by any chance
>>> turn on PARAVIEW_USE_UNIFIED_BINDINGS cmake
>>> flag?
>>>
>>>
>>> Yes. I turned that off, and now it builds
>>> fine. Thanks.
>>>
>>>
>>> I tried 'make test' and got:
>>>
>>> 97% tests passed, 47 tests failed out of 1499
>>>
>>> Failed tests listed below. Do I need to
>>> worry about these, and if so, how
>>> to
>>> fix?
>>>
>>> Thanks.
>>>
>>> -jeff
>>>
>>> The following tests FAILED:
>>> 1 - pv.TestDevelopmentInstall (Failed)
>>> 73 -
>>> vtkPVVTKExtensionsDefault-HeaderTest (Failed)
>>> 688 -
>>> vtkIONetCDFPython-NetCDFCF2DBounds (Failed)
>>> 779 -
>>> vtkPVServerManagerDefaultPython-MultiView
>>> (Failed)
>>> 786 -
>>> vtkPVServerManagerDefaultPython-SymmetricMultiView
>>> (Failed)
>>> 1026 -
>>> vtkRenderingVolumeCxx-TestGPUVolumeRayCastMapperWindowLevel
>>> (Failed)
>>> 1103 - pv.FileSeries (Failed)
>>> 1104 - pv.HistogramSelection (Failed)
>>> 1119 - pv.FindDataDialog (Failed)
>>> 1136 - pv.AnimatePipelineTime (Failed)
>>> 1140 - pv.CameraLink (Failed)
>>> 1142 - pv.CheckableHeader (Failed)
>>> 1165 - pv.FFTOverTime (Failed)
>>> 1178 - pv.NormalGlyphs (Failed)
>>> 1186 - pv.PlotOverTimeAutoApply (Failed)
>>> 1211 - pv.TemporalInterpolator (Failed)
>>> 1218 - pv.UndoRedo2 (Failed)
>>> 1230 - pv.SelectionLabels (Failed)
>>> 1234 -
>>> pv.TraceSupplementalProxiesFully (Failed)
>>> 1252 - pvcs.CameraLink (Failed)
>>> 1254 - pvcs.CheckableHeader (Failed)
>>> 1275 - pvcs.FFTOverTime (Failed)
>>> 1279 - pvcs.ImageVolumeRendering (Failed)
>>> 1293 - pvcs.PlotOverTimeAutoApply (Failed)
>>> 1301 - pvcs.PropertyLink (Failed)
>>> 1317 - pvcs.TensorGlyph (Failed)
>>> 1318 - pvcs.TemporalInterpolator (Failed)
>>> 1325 - pvcs.UndoRedo2 (Failed)
>>> 1340 -
>>> pvcs.TraceSupplementalProxiesFully (Failed)
>>> 1346 - pvcs.HistogramSelection (Failed)
>>> 1351 -
>>> pvcs.NonlinearSubdivisionDisplay (Failed)
>>> 1360 - pvcs.FindDataDialog (Failed)
>>> 1376 - pvcrs.CameraLink (Failed)
>>> 1378 - pvcrs.CheckableHeader (Failed)
>>> 1384 - pvcrs.ComparativeVisPanel (Failed)
>>> 1415 - pvcrs.PropertyLink (Failed)
>>> 1418 - pvcrs.RepresentationSelector
>>> (Failed)
>>> 1420 - pvcrs.SaveCSV (Failed)
>>> 1422 - pvcrs.SimpleInteraction (Failed)
>>> 1424 - pvcrs.SliceAlongPolyline (Failed)
>>> 1426 - pvcrs.SpreadSheet2 (Failed)
>>> 1430 - pvcrs.TabbedViews (Failed)
>>> 1432 - pvcrs.TemporalInterpolator (Failed)
>>> 1439 - pvcrs.UndoRedo2 (Failed)
>>> 1453 -
>>> pvcrs.TraceSupplementalProxiesFully (Failed)
>>> 1458 - pvcrs.HistogramSelection (Failed)
>>> 1469 - pvcrs.FindDataDialog (Failed)
>>> Errors while running CTest
>>> make: *** [test] Error 8
>>>
>>>
>>>
>>>
>>> -jeff
>>>
>>>
>>> Utkarsh
>>>
>>> On Fri, Jan 9, 2015 at 3:46 PM, Jeff Becker
>>> <jeffrey.c.becker at nasa.gov
>>> <mailto:jeffrey.c.becker at nasa.gov>>
>>> wrote:
>>>
>>> Almost there - make output below. Any
>>> ideas? Thanks.
>>>
>>> -jeff
>>>
>>> Scanning dependencies of target
>>> ParaViewExamples
>>> [ 80%] Build examples as a separate project
>>> Not searching for unused variables given
>>> on the command line.
>>> Not searching for unused variables given
>>> on the command line.
>>> Internal cmake changing into directory:
>>> /u/wk/jcbecker/ParaView-build/Examples/All
>>> ======== CMake output ======
>>> The C compiler identification is GNU 4.4.7
>>> The CXX compiler identification is GNU 4.4.7
>>> Check for working C compiler: /usr/bin/cc
>>> Configuring
>>> Check for working C compiler:
>>> /usr/bin/cc -- works
>>> Detecting C compiler ABI info
>>> Configuring
>>> Detecting C compiler ABI info - done
>>> Check for working CXX compiler: /usr/bin/c++
>>> Configuring
>>> Check for working CXX compiler:
>>> /usr/bin/c++ -- works
>>> Detecting CXX compiler ABI info
>>> Configuring
>>> Detecting CXX compiler ABI info - done
>>> Looking for Q_WS_X11
>>> Configuring
>>> Looking for Q_WS_X11 - found
>>> Looking for Q_WS_WIN
>>> Configuring
>>> Looking for Q_WS_WIN - not found
>>> Looking for Q_WS_QWS
>>> Configuring
>>> Looking for Q_WS_QWS - not found
>>> Looking for Q_WS_MAC
>>> Configuring
>>> Looking for Q_WS_MAC - not found
>>> Found Qt4:
>>> /usr/local/Trolltech/Qt-4.8.6/bin/qmake
>>> (found version
>>> "4.8.6")
>>> Configuring
>>> Found Qt4:
>>> /usr/local/Trolltech/Qt-4.8.6/bin/qmake
>>> (found version
>>> "4.8.6")
>>> Configuring
>>> Configuring
>>> Configuring
>>> Configuring
>>> Configuring
>>> Configuring
>>> Configuring
>>> Configuring
>>> Configuring
>>> Configuring
>>> Configuring
>>> Configuring
>>> Configuring
>>> Configuring
>>> Configuring
>>> Configuring
>>> Configuring
>>> Configuring
>>> Configuring
>>> Configuring
>>> Configuring
>>> Configuring
>>> Configuring
>>> Configuring
>>> Configuring
>>> Configuring
>>> Configuring
>>> Configuring
>>> Configuring
>>> Configuring
>>> Configuring
>>> Configuring
>>> Configuring
>>> Configuring
>>> Configuring
>>> Configuring
>>> Configuring
>>> Configuring
>>> Configuring
>>> Configuring
>>> Configuring
>>> Configuring
>>> Configuring done
>>> Generating
>>> Generating
>>> Generating
>>> Generating
>>> Generating
>>> Generating
>>> Generating
>>> Generating
>>> Generating
>>> Generating
>>> Generating
>>> Generating
>>> Generating
>>> Generating
>>> Generating
>>> Generating
>>> Generating
>>> Generating
>>> Generating
>>> Generating
>>> Generating
>>> Generating
>>> Generating done
>>> Build files have been written to:
>>> /u/wk/jcbecker/ParaView-build/Examples/All
>>> Found Qt4:
>>> /usr/local/Trolltech/Qt-4.8.6/bin/qmake
>>> (found version
>>> "4.8.6")
>>> Configuring
>>> Found Qt4:
>>> /usr/local/Trolltech/Qt-4.8.6/bin/qmake
>>> (found version
>>> "4.8.6")
>>> Configuring
>>> Configuring
>>> Configuring
>>> Configuring
>>> Configuring
>>> Configuring
>>> Configuring
>>> Configuring
>>> Configuring
>>> Configuring
>>> Configuring
>>> Configuring
>>> Configuring
>>> Configuring
>>> Configuring
>>> Configuring
>>> Configuring
>>> Configuring
>>> Configuring
>>> Configuring
>>> Configuring
>>> Configuring
>>> Configuring
>>> Configuring
>>> Configuring
>>> Configuring
>>> Configuring
>>> Configuring
>>> Configuring
>>> Configuring
>>> Configuring
>>> Configuring
>>> Configuring
>>> Configuring
>>> Configuring
>>> Configuring
>>> Configuring
>>> Configuring
>>> Configuring
>>> Configuring
>>> Configuring
>>> Configuring
>>> Configuring done
>>> Generating
>>> Generating
>>> Generating
>>> Generating
>>> Generating
>>> Generating
>>> Generating
>>> Generating
>>> Generating
>>> Generating
>>> Generating
>>> Generating
>>> Generating
>>> Generating
>>> Generating
>>> Generating
>>> Generating
>>> Generating
>>> Generating
>>> Generating
>>> Generating
>>> Generating
>>> Generating done
>>> Build files have been written to:
>>> /u/wk/jcbecker/ParaView-build/Examples/All
>>> ======== End CMake output ======
>>> Change Dir:
>>> /u/wk/jcbecker/ParaView-build/Examples/All
>>>
>>> Run Build Command:/usr/bin/gmake
>>> gmake[3]: Entering directory
>>> `/u/wk/jcbecker/ParaView-build/Examples/All'
>>> gmake[4]: Entering directory
>>> `/u/wk/jcbecker/ParaView-build/Examples/All'
>>> gmake[5]: Entering directory
>>> `/u/wk/jcbecker/ParaView-build/Examples/All'
>>> [ 1%] Generating Documentation HTMLs
>>> from xmls
>>> Processing wiki sources
>>> Processing wiki filters
>>> Processing wiki writers
>>> Processing wiki readers
>>> [ 1%] Compiling Qt help project
>>> SMMyElevation.qhp
>>> Building up file structure...
>>> Insert custom filters...
>>> Insert help data for filter section (1
>>> of 1)...
>>> Insert files...
>>> Warning: The file
>>> /u/wk/jcbecker/ParaView-build/Examples/All/Plugins/Filter/doc/*.css
>>> does
>>> not
>>> exist! Skipping it.
>>> Warning: The file
>>> /u/wk/jcbecker/ParaView-build/Examples/All/Plugins/Filter/doc/*.png
>>> does
>>> not
>>> exist! Skipping it.
>>> Warning: The file
>>> /u/wk/jcbecker/ParaView-build/Examples/All/Plugins/Filter/doc/*.jpg
>>> does
>>> not
>>> exist! Skipping it.
>>> Insert contents...
>>> Insert indices...
>>> Documentation successfully generated.
>>> [ 2%] Generating SMMyElevation_doc.h
>>> -- Generate module: SMMyElevation
>>> gmake[5]: *** No rule to make target
>>> `/u/wk/jcbecker/ParaView-build/bin/vtkWrapClientServer-pv4.3',
>>> needed by
>>> `Plugins/Filter/vtkMyElevationFilterClientServer.cxx'.
>>> Stop.
>>> gmake[5]: Leaving directory
>>> `/u/wk/jcbecker/ParaView-build/Examples/All'
>>> gmake[4]: ***
>>> [Plugins/Filter/CMakeFiles/SMMyElevation.dir/all]
>>> Error 2
>>> gmake[4]: Leaving directory
>>> `/u/wk/jcbecker/ParaView-build/Examples/All'
>>> gmake[3]: *** [all] Error 2
>>> gmake[3]: Leaving directory
>>> `/u/wk/jcbecker/ParaView-build/Examples/All'
>>> make[2]: *** [ParaViewExamples.done] Error 1
>>> make[1]: ***
>>> [CMakeFiles/ParaViewExamples.dir/all]
>>> Error 2
>>> make: *** [all] Error 2
>>>
>>> _______________________________________________
>>> Powered by www.kitware.com
>>> <http://www.kitware.com>
>>>
>>> Visit other Kitware open-source projects at
>>> http://www.kitware.com/opensource/opensource.html
>>>
>>> Please keep messages on-topic and check
>>> the ParaView Wiki at:
>>> http://paraview.org/Wiki/ParaView
>>>
>>> Search the list archives at:
>>> http://markmail.org/search/?q=ParaView
>>>
>>> Follow this link to subscribe/unsubscribe:
>>> http://public.kitware.com/mailman/listinfo/paraview
>>>
>>>
>>>
>>>
>>>
>>> _______________________________________________
>>> Powered by www.kitware.com
>>> <http://www.kitware.com>
>>>
>>> Visit other Kitware open-source projects at
>>> http://www.kitware.com/opensource/opensource.html
>>>
>>> Please keep messages on-topic and check the
>>> ParaView Wiki at:
>>> http://paraview.org/Wiki/ParaView
>>>
>>> Search the list archives at:
>>> http://markmail.org/search/?q=ParaView
>>>
>>> Follow this link to subscribe/unsubscribe:
>>> http://public.kitware.com/mailman/listinfo/paraview
>>>
>>>
>>> _______________________________________________
>>> Powered by www.kitware.com <http://www.kitware.com>
>>>
>>> Visit other Kitware open-source projects at
>>> http://www.kitware.com/opensource/opensource.html
>>>
>>> Please keep messages on-topic and check the ParaView Wiki
>>> at: http://paraview.org/Wiki/ParaView
>>>
>>> Search the list archives at:
>>> http://markmail.org/search/?q=ParaView
>>>
>>> Follow this link to subscribe/unsubscribe:
>>> http://public.kitware.com/mailman/listinfo/paraview
>>>
>>>
>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://public.kitware.com/pipermail/paraview/attachments/20150112/304e8f7d/attachment.html>
More information about the ParaView
mailing list