[Paraview] problem building ParaView Examples
Jeff Becker
jeffrey.c.becker at nasa.gov
Mon Jan 12 17:51:05 EST 2015
On 01/12/2015 02:38 PM, Sebastien Jourdain wrote:
> Do you know if that picture come from your screensaver or anything else?
> It seems to be the picture that get captured regardless of the test
> that ran and failed.
>
I don't recognize it.
I was thinking that it might be a permission issue. I could try running
the tests as root.... Would that help? Thanks.
-jeff
>
>
> On Mon, Jan 12, 2015 at 2:46 PM, Jeff Becker
> <jeffrey.c.becker at nasa.gov <mailto:jeffrey.c.becker at nasa.gov>> wrote:
>
> On 01/12/2015 01:38 PM, Utkarsh Ayachit wrote:
>
> That's more from before! :).
>
>
> I assume you meant more "than" before?
>
> Anything funky about the X configuration?
>
>
> What should I look for?
>
> Looks like the framebuffer grabs end up capturing ghost images.
>
>
> -jeff
>
>
> Utkarsh
>
> On Mon, Jan 12, 2015 at 1:28 PM, Jeff Becker
> <jeffrey.c.becker at nasa.gov <mailto:jeffrey.c.becker at nasa.gov>>
> wrote:
>
> On 01/12/2015 11:39 AM, Utkarsh Ayachit wrote:
>
> Mind doing a "ctest -D Experimental"? That'll submit
> the test results
> to the ParaView dashboard [1] and will provide use
> more information as
> to why those tests failed.
>
>
> Done. 996 tests failed (see website below). Thanks.
>
> -jeff
>
> [1] https://open.cdash.org/index.php?project=ParaView
>
> On Mon, Jan 12, 2015 at 11:37 AM, Jeff Becker
> <jeffrey.c.becker at nasa.gov
> <mailto:jeffrey.c.becker at nasa.gov>>
> wrote:
>
> On 01/12/2015 10:47 AM, Jeff Becker wrote:
>
> On 01/10/2015 04:39 PM, Utkarsh Ayachit wrote:
>
> Not sure what's the issue. I tested out in my
> build and seems to work as
> expected. Mind attaching your CMakeCache.txt file?
> Did you by any chance
> turn on PARAVIEW_USE_UNIFIED_BINDINGS cmake flag?
>
>
> Yes. I turned that off, and now it builds fine.
> Thanks.
>
>
> I tried 'make test' and got:
>
> 97% tests passed, 47 tests failed out of 1499
>
> Failed tests listed below. Do I need to worry
> about these, and if so, how
> to
> fix?
>
> Thanks.
>
> -jeff
>
> The following tests FAILED:
> 1 - pv.TestDevelopmentInstall (Failed)
> 73 - vtkPVVTKExtensionsDefault-HeaderTest
> (Failed)
> 688 - vtkIONetCDFPython-NetCDFCF2DBounds
> (Failed)
> 779 -
> vtkPVServerManagerDefaultPython-MultiView (Failed)
> 786 -
> vtkPVServerManagerDefaultPython-SymmetricMultiView
> (Failed)
> 1026 -
> vtkRenderingVolumeCxx-TestGPUVolumeRayCastMapperWindowLevel
> (Failed)
> 1103 - pv.FileSeries (Failed)
> 1104 - pv.HistogramSelection (Failed)
> 1119 - pv.FindDataDialog (Failed)
> 1136 - pv.AnimatePipelineTime (Failed)
> 1140 - pv.CameraLink (Failed)
> 1142 - pv.CheckableHeader (Failed)
> 1165 - pv.FFTOverTime (Failed)
> 1178 - pv.NormalGlyphs (Failed)
> 1186 - pv.PlotOverTimeAutoApply (Failed)
> 1211 - pv.TemporalInterpolator (Failed)
> 1218 - pv.UndoRedo2 (Failed)
> 1230 - pv.SelectionLabels (Failed)
> 1234 - pv.TraceSupplementalProxiesFully (Failed)
> 1252 - pvcs.CameraLink (Failed)
> 1254 - pvcs.CheckableHeader (Failed)
> 1275 - pvcs.FFTOverTime (Failed)
> 1279 - pvcs.ImageVolumeRendering (Failed)
> 1293 - pvcs.PlotOverTimeAutoApply (Failed)
> 1301 - pvcs.PropertyLink (Failed)
> 1317 - pvcs.TensorGlyph (Failed)
> 1318 - pvcs.TemporalInterpolator (Failed)
> 1325 - pvcs.UndoRedo2 (Failed)
> 1340 - pvcs.TraceSupplementalProxiesFully
> (Failed)
> 1346 - pvcs.HistogramSelection (Failed)
> 1351 - pvcs.NonlinearSubdivisionDisplay (Failed)
> 1360 - pvcs.FindDataDialog (Failed)
> 1376 - pvcrs.CameraLink (Failed)
> 1378 - pvcrs.CheckableHeader (Failed)
> 1384 - pvcrs.ComparativeVisPanel (Failed)
> 1415 - pvcrs.PropertyLink (Failed)
> 1418 - pvcrs.RepresentationSelector (Failed)
> 1420 - pvcrs.SaveCSV (Failed)
> 1422 - pvcrs.SimpleInteraction (Failed)
> 1424 - pvcrs.SliceAlongPolyline (Failed)
> 1426 - pvcrs.SpreadSheet2 (Failed)
> 1430 - pvcrs.TabbedViews (Failed)
> 1432 - pvcrs.TemporalInterpolator (Failed)
> 1439 - pvcrs.UndoRedo2 (Failed)
> 1453 - pvcrs.TraceSupplementalProxiesFully
> (Failed)
> 1458 - pvcrs.HistogramSelection (Failed)
> 1469 - pvcrs.FindDataDialog (Failed)
> Errors while running CTest
> make: *** [test] Error 8
>
>
>
>
> -jeff
>
>
> Utkarsh
>
> On Fri, Jan 9, 2015 at 3:46 PM, Jeff Becker
> <jeffrey.c.becker at nasa.gov
> <mailto:jeffrey.c.becker at nasa.gov>>
> wrote:
>
> Almost there - make output below. Any ideas?
> Thanks.
>
> -jeff
>
> Scanning dependencies of target ParaViewExamples
> [ 80%] Build examples as a separate project
> Not searching for unused variables given on
> the command line.
> Not searching for unused variables given on
> the command line.
> Internal cmake changing into directory:
> /u/wk/jcbecker/ParaView-build/Examples/All
> ======== CMake output ======
> The C compiler identification is GNU 4.4.7
> The CXX compiler identification is GNU 4.4.7
> Check for working C compiler: /usr/bin/cc
> Configuring
> Check for working C compiler: /usr/bin/cc -- works
> Detecting C compiler ABI info
> Configuring
> Detecting C compiler ABI info - done
> Check for working CXX compiler: /usr/bin/c++
> Configuring
> Check for working CXX compiler: /usr/bin/c++
> -- works
> Detecting CXX compiler ABI info
> Configuring
> Detecting CXX compiler ABI info - done
> Looking for Q_WS_X11
> Configuring
> Looking for Q_WS_X11 - found
> Looking for Q_WS_WIN
> Configuring
> Looking for Q_WS_WIN - not found
> Looking for Q_WS_QWS
> Configuring
> Looking for Q_WS_QWS - not found
> Looking for Q_WS_MAC
> Configuring
> Looking for Q_WS_MAC - not found
> Found Qt4:
> /usr/local/Trolltech/Qt-4.8.6/bin/qmake (found
> version
> "4.8.6")
> Configuring
> Found Qt4:
> /usr/local/Trolltech/Qt-4.8.6/bin/qmake (found
> version
> "4.8.6")
> Configuring
> Configuring
> Configuring
> Configuring
> Configuring
> Configuring
> Configuring
> Configuring
> Configuring
> Configuring
> Configuring
> Configuring
> Configuring
> Configuring
> Configuring
> Configuring
> Configuring
> Configuring
> Configuring
> Configuring
> Configuring
> Configuring
> Configuring
> Configuring
> Configuring
> Configuring
> Configuring
> Configuring
> Configuring
> Configuring
> Configuring
> Configuring
> Configuring
> Configuring
> Configuring
> Configuring
> Configuring
> Configuring
> Configuring
> Configuring
> Configuring
> Configuring
> Configuring done
> Generating
> Generating
> Generating
> Generating
> Generating
> Generating
> Generating
> Generating
> Generating
> Generating
> Generating
> Generating
> Generating
> Generating
> Generating
> Generating
> Generating
> Generating
> Generating
> Generating
> Generating
> Generating
> Generating done
> Build files have been written to:
> /u/wk/jcbecker/ParaView-build/Examples/All
> Found Qt4:
> /usr/local/Trolltech/Qt-4.8.6/bin/qmake (found
> version
> "4.8.6")
> Configuring
> Found Qt4:
> /usr/local/Trolltech/Qt-4.8.6/bin/qmake (found
> version
> "4.8.6")
> Configuring
> Configuring
> Configuring
> Configuring
> Configuring
> Configuring
> Configuring
> Configuring
> Configuring
> Configuring
> Configuring
> Configuring
> Configuring
> Configuring
> Configuring
> Configuring
> Configuring
> Configuring
> Configuring
> Configuring
> Configuring
> Configuring
> Configuring
> Configuring
> Configuring
> Configuring
> Configuring
> Configuring
> Configuring
> Configuring
> Configuring
> Configuring
> Configuring
> Configuring
> Configuring
> Configuring
> Configuring
> Configuring
> Configuring
> Configuring
> Configuring
> Configuring
> Configuring done
> Generating
> Generating
> Generating
> Generating
> Generating
> Generating
> Generating
> Generating
> Generating
> Generating
> Generating
> Generating
> Generating
> Generating
> Generating
> Generating
> Generating
> Generating
> Generating
> Generating
> Generating
> Generating
> Generating done
> Build files have been written to:
> /u/wk/jcbecker/ParaView-build/Examples/All
> ======== End CMake output ======
> Change Dir:
> /u/wk/jcbecker/ParaView-build/Examples/All
>
> Run Build Command:/usr/bin/gmake
> gmake[3]: Entering directory
> `/u/wk/jcbecker/ParaView-build/Examples/All'
> gmake[4]: Entering directory
> `/u/wk/jcbecker/ParaView-build/Examples/All'
> gmake[5]: Entering directory
> `/u/wk/jcbecker/ParaView-build/Examples/All'
> [ 1%] Generating Documentation HTMLs from xmls
> Processing wiki sources
> Processing wiki filters
> Processing wiki writers
> Processing wiki readers
> [ 1%] Compiling Qt help project SMMyElevation.qhp
> Building up file structure...
> Insert custom filters...
> Insert help data for filter section (1 of 1)...
> Insert files...
> Warning: The file
> /u/wk/jcbecker/ParaView-build/Examples/All/Plugins/Filter/doc/*.css
> does
> not
> exist! Skipping it.
> Warning: The file
> /u/wk/jcbecker/ParaView-build/Examples/All/Plugins/Filter/doc/*.png
> does
> not
> exist! Skipping it.
> Warning: The file
> /u/wk/jcbecker/ParaView-build/Examples/All/Plugins/Filter/doc/*.jpg
> does
> not
> exist! Skipping it.
> Insert contents...
> Insert indices...
> Documentation successfully generated.
> [ 2%] Generating SMMyElevation_doc.h
> -- Generate module: SMMyElevation
> gmake[5]: *** No rule to make target
> `/u/wk/jcbecker/ParaView-build/bin/vtkWrapClientServer-pv4.3',
> needed by
> `Plugins/Filter/vtkMyElevationFilterClientServer.cxx'.
> Stop.
> gmake[5]: Leaving directory
> `/u/wk/jcbecker/ParaView-build/Examples/All'
> gmake[4]: ***
> [Plugins/Filter/CMakeFiles/SMMyElevation.dir/all]
> Error 2
> gmake[4]: Leaving directory
> `/u/wk/jcbecker/ParaView-build/Examples/All'
> gmake[3]: *** [all] Error 2
> gmake[3]: Leaving directory
> `/u/wk/jcbecker/ParaView-build/Examples/All'
> make[2]: *** [ParaViewExamples.done] Error 1
> make[1]: ***
> [CMakeFiles/ParaViewExamples.dir/all] Error 2
> make: *** [all] Error 2
>
> _______________________________________________
> Powered by www.kitware.com
> <http://www.kitware.com>
>
> Visit other Kitware open-source projects at
> http://www.kitware.com/opensource/opensource.html
>
> Please keep messages on-topic and check the
> ParaView Wiki at:
> http://paraview.org/Wiki/ParaView
>
> Search the list archives at:
> http://markmail.org/search/?q=ParaView
>
> Follow this link to subscribe/unsubscribe:
> http://public.kitware.com/mailman/listinfo/paraview
>
>
>
>
>
> _______________________________________________
> Powered by www.kitware.com <http://www.kitware.com>
>
> Visit other Kitware open-source projects at
> http://www.kitware.com/opensource/opensource.html
>
> Please keep messages on-topic and check the
> ParaView Wiki at:
> http://paraview.org/Wiki/ParaView
>
> Search the list archives at:
> http://markmail.org/search/?q=ParaView
>
> Follow this link to subscribe/unsubscribe:
> http://public.kitware.com/mailman/listinfo/paraview
>
>
> _______________________________________________
> Powered by www.kitware.com <http://www.kitware.com>
>
> Visit other Kitware open-source projects at
> http://www.kitware.com/opensource/opensource.html
>
> Please keep messages on-topic and check the ParaView Wiki at:
> http://paraview.org/Wiki/ParaView
>
> Search the list archives at: http://markmail.org/search/?q=ParaView
>
> Follow this link to subscribe/unsubscribe:
> http://public.kitware.com/mailman/listinfo/paraview
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://public.kitware.com/pipermail/paraview/attachments/20150112/3aff07a6/attachment.html>
More information about the ParaView
mailing list