[Paraview] Redistributable ParaView OS X Package is unusable.

David Partyka david.partyka at kitware.com
Tue May 24 14:40:44 EDT 2011 

git checkout v3.10.1 will put you right on the tag.

On Tue, May 24, 2011 at 2:38 PM, Michael Jackson <
mike.jackson at bluequartz.net> wrote:

> I don't usually run them as 'sudo' either but I am grasping at anything at
> this point. This almost seems like the main ParaView program isn't loading a
> library/plugin that contains the menu bar setup code. Is that code in fact
> in a library or plugin? Maybe that library/plugin isn't getting properly
> setup during the fixup_bundle stage? Maybe I have a missmash of code in my
> ParaView source directory? What is the git tag for ParaView 3.10.1? Maybe I
> am not pulling correctly? Getting ready for another build with a completely
> clean 3.10.1 download from Kitware.
> --
> Mike Jackson <www.bluequartz.net>
>
>
> On May 24, 2011, at 1:42 PM, David Partyka wrote:
>
> > The only other thing I can think of is that I don't run any of those
> commands as sudo to create the binary. If you mix/match
> priviledge/non-priviliedged execution, something will likely have a
> permission problem and fail. To generate the binary this is my bash history
> verbatim.
> >
> >   540  mkdir build-mike
> >   541  cd source/
> >   542  git pull
> >   543  git submodule update
> >   544  cd ..
> >   545  cd build-mike/
> >   546* cmake -DBUILD_SHARED_LIBS:BOOL=ON
> -DCMAKE_BUILD_TYPE:STRING=Release
> -DCMAKE_INSTALL_PREFIX=/Users/Shared/Toolkits/ParaView-3.10.1
> -DCMAKE_OSX_ARCHITECTURES:STRING="x86_64"
> -DCMAKE_OSX_DEPLOYMENT_TARGET:STRING="10.5"
> -DCMAKE_OSX_SYSROOT:PATH="/Developer/SDKs/MacOSX10.5.sdk" ../source/
> > <launched cmake-gui to set qmake location>
> >   547  make -j18
> >   548  cpack -G DragNDrop --config
> Applications/ParaView/CPackParaViewConfig.cmake
> >
> >
> > On Tue, May 24, 2011 at 8:31 AM, Michael Jackson <
> mike.jackson at bluequartz.net> wrote:
> > Hmm. I am not seeing anything in there that is different from my setup
> > besides the Qt version. I have tried both 4.6.3 and 4.7.2 of Qt and
> > CMake versions 2.8.3 and 2.8.4. All with the same issue. Maybe asking
> > on the Qt interest list if anyone has ever seen this type of behavior
> > before?
> > _________________________________________________________
> > Mike Jackson                  mike.jackson at bluequartz.net
> >
> >
> > On Tue, May 24, 2011 at 8:14 AM, David Partyka
> > <david.partyka at kitware.com> wrote:
> > > Qt 4.6.3 built by hand with cocoa, the binary is x64 only targeting
> 10.5. I
> > > am building from the tip of the 'release' branch.
> > > Qt Configure command:
> > > export QMAKE_MACOSX_DEPLOYMENT_TARGET=10.5
> > > ./configure
> > > --prefix=/Users/partyd/Dashboards/Support/qt-4.6.3-MacOSX10.5/bin
> -nomake
> > > demos -nomake examples -arch x86_64 -opensource -release -cocoa -shared
> > >
> > > I also pass these in as -D arguments on initial configure with cmake.
> > > set(CMAKE_OSX_ARCHITECTURES "x86_64" CACHE STRING "force build for
> 64-bit
> > > Leopard" FORCE)
> > > set(CMAKE_OSX_DEPLOYMENT_TARGET "10.5" CACHE STRING "force build for
> 64-bit
> > > Leopard" FORCE)
> > > set(CMAKE_OSX_SYSROOT "/Developer/SDKs/MacOSX10.5.sdk" CACHE PATH
> "force
> > > build for 64-bit Leopard" FORCE)
> > > On Mon, May 23, 2011 at 10:30 PM, Michael Jackson
> > > <mike.jackson at bluequartz.net> wrote:
> > >>
> > >> Dave,
> > >>  What is the configuration you are using? Qt Version? As Carbon or
> Cocoa?
> > >> Universal Binaries or x64 only? Self build or download from Nokia?
> > >>
> > >>  What tag from paraview git repository are you using? I may be able to
> get
> > >> my environment going like yours.
> > >>
> > >>  I also tried the latest ParaView master from head and my plugins need
> to
> > >> be updated for that to work so using that is out of the question at
> this
> > >> point.
> > >>
> > >>  This is what I have tried and have not worked:
> > >>    Qt 4.6.2 Self built with NO custom plugins
> > >>    Qt 4.7.2 Self built with NO custom plugins
> > >>    "make install" of both of the above.
> > >>    using sudo for everything to avoid possible permissions issues.
> > >>
> > >> I'll download the prebuilt Qt libraries from Nokia and try those. I
> guess
> > >> I could also try CMake 2.8.4
> > >> ___________________________________________________________
> > >> Mike Jackson                      www.bluequartz.net
> > >> Principal Software Engineer       mike.jackson at bluequartz.net
> > >> BlueQuartz Software               Dayton, Ohio
> > >>
> > >>
> > >>
> > >> On May 23, 2011, at 6:33 PM, David Partyka wrote:
> > >>
> > >> > Can you provide the initial cmake configuration details of your
> vanila
> > >> > paraview build?
> > >> >
> > >> > On Mon, May 23, 2011 at 6:02 PM, Michael Jackson
> > >> > <mike.jackson at bluequartz.net> wrote:
> > >> > I tried this also:
> > >> >
> > >> > 562:[mjackson at ferb2:4.6.2]$ sudo rm -rf _CPack_Packages/; sudo
> cpack -G
> > >> > ZIP --config Applications/ParaView/CPackParaViewConfig.cmake
> > >> > CPack: Create package using ZIP
> > >> > CPack: Install projects
> > >> > CPack: - Run preinstall target for: ParaView Runtime Libs
> > >> > CPack: - Install project: ParaView Runtime Libs
> > >> > CPack: - Run preinstall target for: HDF5 Core Library
> > >> > CPack: - Install project: HDF5 Core Library
> > >> > CPack: - Run preinstall target for: VTK Runtime Libs
> > >> > CPack: - Install project: VTK Runtime Libs
> > >> > CPack: - Run preinstall target for: ParaView Components
> > >> > CPack: - Install project: ParaView Components
> > >> > CPack: Create package
> > >> > CPack Error: Problem while adding file<
> > >> > /Users/Shared/OpenSource/ParaView-3.10.1/4.6.2
> /_CPack_Packages/Darwin-i386/ZIP/ParaView-3.10.1-Darwin-i386/lib/paraview-3.10/libCosmo.dylib>
> > >> > to archive
> > >> > </Users/Shared/OpenSource/ParaView-3.10.1/4.6.2
> /_CPack_Packages/Darwin-i386/ZIP/ParaView-3.10.1-Darwin-i386.zip>
> > >> > .ERROR =archive_write_header: Filetype not supported
> > >> > CPack Error: Problem compressing the directory
> > >> > CPack Error: Error when generating package: ParaView
> > >> >
> > >> >
> > >> > And that was built against Qt 4.6.2.
> > >> > ___________________________________________________________
> > >> > Mike Jackson                      www.bluequartz.net
> > >> > Principal Software Engineer       mike.jackson at bluequartz.net
> > >> > BlueQuartz Software               Dayton, Ohio
> > >> >
> > >> > On May 23, 2011, at 5:56 PM, David Partyka wrote:
> > >> >
> > >> > > I am really unsure, I haven't ever seen these kinds of errors
> before
> > >> > > and I am unable to reproduce this. sla.r on my system appears to
> just
> > >> > > contain license information. Have you tried manually removeing the
> > >> > > _CPack_Packages directory in your build tree to see if for some
> reason cpack
> > >> > > isn't able to blow it away entirely?
> > >> > >
> > >> > > On Mon, May 23, 2011 at 5:24 PM, Michael Jackson
> > >> > > <mike.jackson at bluequartz.net> wrote:
> > >> > > When running CPack on a "clean" paraview build directory where
> NONE of
> > >> > > my plugins are being build I get the following after trying to run
> CPack:
> > >> > >
> > >> > > cpack -G DragNDrop --config
> > >> > > Applications/ParaView/CPackParaViewConfig.cmake
> > >> > > .....
> > >> > >
> > >> > >
> > >> > >
> /Users/Shared/OpenSource/ParaView-3.10.1/Build/_CPack_Packages/Darwin-i386/DragNDrop/sla.r:522:
> > >> > > ### /usr/bin/Rez - String spans lines.
> > >> > >
> > >> > >
> /Users/Shared/OpenSource/ParaView-3.10.1/Build/_CPack_Packages/Darwin-i386/DragNDrop/sla.r:
> > >> > > ### /usr/bin/Rez - Since errors occurred,
> > >> > >
> /Users/Shared/OpenSource/ParaView-3.10.1/Build/_CPack_Packages/Darwin-i386/DragNDrop/temp-udco.dmg's
> > >> > > resource fork was not completely updated.
> > >> > >
> > >> > >
> /Users/Shared/OpenSource/ParaView-3.10.1/Build/_CPack_Packages/Darwin-i386/DragNDrop/sla.r:
> > >> > > ### /usr/bin/Rez - SysError -37 during set file info.
> > >> > >
> > >> > > CPack Error: Problem compressing the directory
> > >> > > CPack Error: Error when generating package: ParaView
> > >> > >
> > >> > >
> > >> > >
> > >> > > ___________________________________________________________
> > >> > > Mike Jackson                      www.bluequartz.net
> > >> > > Principal Software Engineer       mike.jackson at bluequartz.net
> > >> > > BlueQuartz Software               Dayton, Ohio
> > >> > >
> > >> > > On May 23, 2011, at 4:32 PM, David Partyka wrote:
> > >> > >
> > >> > > > I've never seen anything like that, as that is the same process
> I
> > >> > > > used to make the 3.10.1 binaries. Though I did use cmake 2.8.4.
> Are you
> > >> > > > using a really new Qt or something along those lines?
> > >> > > >
> > >> > > > On Mon, May 23, 2011 at 4:19 PM, Michael Jackson
> > >> > > > <mike.jackson at bluequartz.net> wrote:
> > >> > > > I followed the directions on the wiki page to compile my own
> > >> > > > ParaView 3.10.1 because I have some custom plugins that I
> compile. The .dmg
> > >> > > > image was created just fine but the contained "ParaView.app"
> when launched
> > >> > > > only has a menu bar that has "New Application" menu. Nothing
> else. Yet when
> > >> > > > I run it from the Build folder everything works just fine. Is
> there
> > >> > > > something in the cmake configuration of ParaView that I need to
> set that
> > >> > > > tells CMake that I am going to making a redistributable package?
> The same
> > >> > > > thing happens if I try a "make install" from the command line.
> This is on OS
> > >> > > > X 10.6.8 with CMake 2.8.3 and the ParaView 3.10.1 sources from
> the web site.
> > >> > > > ___________________________________________________________
> > >> > > > Mike Jackson                      www.bluequartz.net
> > >> > > > Principal Software Engineer       mike.jackson at bluequartz.net
> > >> > > > BlueQuartz Software               Dayton, Ohio
> > >> > > >
> > >> > > > _______________________________________________
> > >> > > > Powered by www.kitware.com
> > >> > > >
> > >> > > > Visit other Kitware open-source projects at
> > >> > > > http://www.kitware.com/opensource/opensource.html
> > >> > > >
> > >> > > > Please keep messages on-topic and check the ParaView Wiki at:
> > >> > > > http://paraview.org/Wiki/ParaView
> > >> > > >
> > >> > > > Follow this link to subscribe/unsubscribe:
> > >> > > > http://www.paraview.org/mailman/listinfo/paraview
> > >> > > >
> > >> > >
> > >> > >
> > >> >
> > >> >
> > >>
> > >
> > >
> > _______________________________________________
> > Powered by www.kitware.com
> >
> > Visit other Kitware open-source projects at
> http://www.kitware.com/opensource/opensource.html
> >
> > Please keep messages on-topic and check the ParaView Wiki at:
> http://paraview.org/Wiki/ParaView
> >
> > Follow this link to subscribe/unsubscribe:
> > http://www.paraview.org/mailman/listinfo/paraview
> >
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.paraview.org/pipermail/paraview/attachments/20110524/c263d34e/attachment.htm>

More information about the ParaView mailing list