Antw: [Paraview] Use paraview with a SGI prism and a Cave

[Christian Wohlschlager]

** Reply Requested When Convenient **

Hi !

I didnt try this before  , ( i will soon) but i recommend try 
LowerRright (front) = Upperright(floor)
                            LowerLeft (floor)  = 0,0, 0  (front =
0,0,-1)        (z should be 0 in front ) 
                            LowerRight (floor) = 1 ,0,0

i m not shore but this should it , just give in the coordinates from a
cube.
tell me your results :-)

christian

>>> yi mu <mugjfyi at yahoo.com> 11/02/06 11:30 PM >>> 
Hi Christian

Thank you very much for your documentation, I was able
to run cave module. I have a cube display with four
walls, including floor. I am now using three of them:
two walls and a floor, the geometry displays on the
wall ok but not on the floor, do you have any idea how
to specify the coordinates for the floor?

Here is the coordinates for the two walls:

<Machine Name="prism_d2"
  Environment="DISPLAY=:0.0"
  LowerLeft="- 1.0 0 - 1.0"
  LowerRight="0 0 - 1.0"
  UpperLeft="- 1.0 1.0  - 1.0" />

  <Machine Name="prism_d3"
  Environment="DISPLAY=:0.2"
  LowerLeft="0 0 - 1 "
  LowerRight="1 0 - 1 "
  UpperLeft="0 1 - 1" />

Thank you in advance.

Yi

---  Christian Wohlschlager
<Christian.Wohlschlager at jku.at> wrote:

> ** Reply Requested When Convenient **
> 
> Hi Yi !
> 
> In fact i use 2.5 because i can read in .cube
> gaussian files for 2.4
> there is an error but the cave module ??? (should
> run also)
> The problem is if you have a cave with 3 walls you
> need 3 processors
> for 4 4 processors ...
> i can run the pvserver with the cave display and mpi
> and on the client
> in our case (maybe also in yours) the same.
> 
> so run :
> on prism:
> >mpirun - np 3 .\pvserver cave.pvx
> also on prism another screen or session
> > ./pvclient -- stereo 
> 
> you can see the client is connected to the server
> and the Client gui is
> opend on the display of pvclient is set.
> 
> the actual cave display is set in the cave.pvx 
> 
> Be carefull in defining cave.pvx during my struggle
> with paraview on
> the cave i found out the this is more or less on of
> the keys in getting
> a good cave visualisation.
> 
> You can send me your cave.pvx (what ever you named
> it) and your
> configuration and i can give my hints.
> 
> i be happy to help you
> 
> christian
> 
> 
> 
> >>> yi mu <mugjfyi at yahoo.com> 10/30/06 11:55  >>>
> Hi, Christian,
> 
> We have the same configuration as yours, so I am
> very
> interested in trying the cave rendering mode out.
> From
> your document, step 2, it says Paraview 2.5 (from
> cvs)
> with MPI enabled and Paraview 2.5 not MPI enabled,
> do
> you  mean the server will run with mpi enable and
> the
> client with mpi not enabled? which means pvserver
> will
> be compiled with MPI enabled and pvclient will be
> compiled without MPI enabled? 
> 
> 
> Do we really need paraview2.5, how about lower 
> stable
> version, like paraview2.4? 
> 
> Thank you in advance for your help and I really
> appreciate your efforts in investigating paraview
> cave
> render mode.
> 
> 
> 
> Yi
> 
> 
>  
>
____________________________________________________________________________________
> Everyone is raving about the all- new Yahoo! Mail 
> (http://advision.webevents.yahoo.com/mailbeta/)
> 
> _______________________________________________
> ParaView mailing list
> ParaView at paraview.org 
> http://www.paraview.org/mailman/listinfo/paraview
> 


 
____________________________________________________________________________________
Everyone is raving about the all- new Yahoo! Mail 
(http://advision.webevents.yahoo.com/mailbeta/)

_______________________________________________
ParaView mailing list
ParaView at paraview.org
http://www.paraview.org/mailman/listinfo/paraview