[IGSTK-Users] IGSTK-Users Digest, Vol 38, Issue 3
Patrick Cheng
cheng at isis.georgetown.edu
Tue Aug 25 12:48:29 EDT 2009
Hi Kai Yang,
To display 3D model, usually we will use a 3D surface mesh. To generate
those surface mesh, you will have to segment them out first. There are
many tools available, such as ITKSnap and 3D Slicer. If you save the
segmentation as an ITK mesh object, IGSTK will be able to load it and
render it in the View.
Hope this will be helpful.
Patrick
kai yang wrote:
> Dear Andinet,
>
> The 3D model of the organ in medince means to build a three dimensional
> model of the organ from its 2D CT scans, which is in dicom format.
>
> Regards
>
> Yang Kai
>
> > From: igstk-users-request at public.kitware.com
> > Subject: IGSTK-Users Digest, Vol 38, Issue 3
> > To: igstk-users at public.kitware.com
> > Date: Fri, 14 Aug 2009 08:43:13 -0400
> >
> > Send IGSTK-Users mailing list submissions to
> > igstk-users at public.kitware.com
> >
> > To subscribe or unsubscribe via the World Wide Web, visit
> > http://public.kitware.com/cgi-bin/mailman/listinfo/igstk-users
> > or, via email, send a message with subject or body 'help' to
> > igstk-users-request at public.kitware.com
> >
> > You can reach the person managing the list at
> > igstk-users-owner at public.kitware.com
> >
> > When replying, please edit your Subject line so it is more specific
> > than "Re: Contents of IGSTK-Users digest..."
> >
> >
> > Today's Topics:
> >
> > 1. Re: IGSTK-Users Digest, Vol 38, Issue 2 (kai yang)
> > 2. Re: IGSTK-Users Digest, Vol 38, Issue 2 (An dinet Enquobahrie)
> >
> >
> > ----------------------------------------------------------------------
> >
> > Message: 1
> > Date: Fri, 14 Aug 2009 11:09:09 +0800
> > From: kai yang <yk119 at hotmail.com>
> > Subject: Re: [IGSTK-Users] IGSTK-Users Digest, Vol 38, Issue 2
> > To: <igstk-users at public.kitware.com>
> > Message-ID: <BAY114-W3480F294B0F8385A963CD4E4020 at phx.gbl>
> > Content-Type: text/plain; charset="gb2312"
> >
> >
> > Dear IGSTK users:
> >
> >
> >
> > I have installed and run needlebiopsy.exe, working successfully with
> Aurora. In the GUI, there is only 3D view of CT sections in the lower
> right pannel. I would like to build a 3D model of the organs in the
> system. So my question is:
> >
> >
> >
> > Could you tell me the workflow of building 3D models of the organ
> from CT scan and integrated with NDI tracking system, based needlebiopsy
> source code?
> &g t;
> >
> >
> > Thank you and best regards
> >
> >
> >
> > Kai Yang
> >
> >
> >
> > > From: igstk-users-request at public.kitware.com
> > > Subject: IGSTK-Users Digest, Vol 38, Issue 2
> > > To: igstk-users at public.kitware.com
> > > Date: Sat, 8 Aug 2009 12:00:05 -0400
> > >
> > > Send IGSTK-Users mailing list submissions to
> > > igstk-users at public.kitware.com
> > >
> > > To subscribe or unsubscribe via the World Wide Web, visit
> > > http://public.kitware.com/cgi-bin/mailman/listinfo/igstk-users
> > > or, via email, send a message with subject or body 'help' to
> > > igstk-users-request at public.kitware.com
> > >
> > > You can reach the person managing the list at
> > > igstk-users-owner at public.kitware.com
> > >
> > > When replying, please edit your Subject line so it is more specific
> > > than "Re: Con tents of IGSTK-Users digest..."
> > >
> > >
> > > Today's Topics:
> > >
> > > 1. IGSTK-4.2 Debug w/ OpenCV (Daly, Mike)
> > > 2. Re: IGSTK-4.2 Debug w/ OpenCV (Patrick Cheng)
> > > 3. Re: IGSTK-4.2 Debug w/ OpenCV (Patrick Cheng)
> > >
> > >
> > > ----------------------------------------------------------------------
> > >
> > > Message: 1
> > > Date: Fri, 7 Aug 2009 13:20:03 -0400
> > > From: "Daly, Mike" <Mike.Daly at rmp.uhn.on.ca>
> > > Subject: [IGSTK-Users] IGSTK-4.2 Debug w/ OpenCV
> > > To: <igstk-users at public.kitware.com>
> > > Message-ID:
> > > <EF2641E33162A443B6A43CDBCD160A80037D65 at rmpmail01.rmpuhn.ca>
> > > Content-Type: text/plain; charset="iso-8859-1"
> > >
> > > IGSTK users,
> > >
> > > I'm building IGSTK-4.2 with USE_OpenCV and USE_VideoImager CMake
> options ON, using the OpenCV May-08-2009 snapshot provided on the Wiki.
> I can successfully build and run in Release mode, but in Debug mode I
> encounter the following linker error for many of the example
> applications (e.g., VideoFrameGrabberAndViewerWebcamWin, NeedleBiopsy):
> > >
> > > LINK : fatal error LNK1104: cannot open file 'cxcore110.lib'
> > >
> > > Has anyone run IGSTK-4.2 in Debug mode using OpenCV? Note that
> OpenCV denotes Debug libraries with an extra d (e.g., cxcore110d.lib)
> under the lib\debug folder, so I'm not sure if it is looking for the
> wrong file somehow. I have the OpenCV lib\ folders in my path. Any help
> is appreciated.
> > >
> > > Also, does anyone know if you can build OpenCV using static
> libraries, since requiring .dlls sometimes gets annoying when
> distributing an .exe?
> > >
> > > Thanks,
> > > Mike Daly
> > >
> > >
> > >
> > >
> > > This e-mail may contain confidential a nd/or privileged information
> for the sole use of the intended recipient.
> > > Any review or distribution by anyone other than the person for whom
> it was originally intended is strictly prohibited.
> > > If you have received this e-mail in error, please contact the
> sender and delete all copies.
> > > Opinions, conclusions or other information contained in this e-mail
> may not be that of the organization.
> > > -------------- next part --------------
> > > An HTML attachment was scrubbed...
> > > URL:
> <http://public.kitware.com/pipermail/igstk-users/attachments/20090807/6a218bd5/attachment.html>
> > >
> > > ------------------------------
> > >
> > > Message: 2
> > > Date: Fri, 07 Aug 2009 14:06:01 -0400
> > > From: Patrick Cheng <cheng at isis.georgetown.edu>
> > > Subject: Re: [IGSTK-Users] IGSTK-4.2 Debug w/ OpenCV
> > > To: "Daly, Mike" <Mike.Daly at rmp.uhn.on.ca >
> > > Cc: igstk-users at public.kitware.com
> > > Message-ID: <4A7C6D09.5040906 at isis.georgetown.edu>
> > > Content-Type: text/plain; charset=ISO-8859-1; format=flowed
> > >
> > > Hi Mike,
> > >
> > > There is some problem with the OpenCV library on the wiki. I
> haven't got
> > > time to investigate it.
> > >
> > > Supposedly, cmake will handle the linking of library files
> > > automatically. when you build under debug, it will link to
> > > "cxcore110d.lib" Somehow, that link is broken here.
> > >
> > > As a temporary fix, you can change the line 396 of
> > > IGSTK\Source\CMakeLists.txt to
> > >
> > > SET(EXTRA_LIBS ${EXTRA_LIBS} cxcore110d cv110d highgui110d)
> > >
> > > This will work under debug, but not release mode.
> > >
> > > I will look into this problem further.
> > >
> > > Patrick
> > ; >
> > > Daly, Mike wrote:
> > > > IGSTK users,
> > > >
> > > > I'm building IGSTK-4.2 with USE_OpenCV and USE_VideoImager CMake
> options
> > > > ON, using the OpenCV May-08-2009 snapshot provided on the Wiki. I
> can
> > > > successfully build and run in Release mode, but in Debug mode I
> > > > encounter the following linker error for many of the example
> > > > applications (e.g., VideoFrameGrabberAndViewerWebcamWin,
> NeedleBiopsy):
> > > >
> > > > LINK : fatal error LNK1104: cannot open file 'cxcore110.lib'
> > > >
> > > > Has anyone run IGSTK-4.2 in Debug mode using OpenCV? Note that
> OpenCV
> > > > denotes Debug libraries with an extra d (e.g., cxcore110d.lib)
> under the
> > > > lib\debug folder, so I'm not sure if it is looking for the wrong
> file
> > > > somehow. I have the OpenCV lib\ folders in my path. Any help is
> > > > appreciated.
> > > >
> > > > Also, does anyone know if you can build OpenCV using static
> libraries,
> > > > since requiring .dlls sometimes gets annoying when distributing
> an .exe?
> > > >
> > > > Thanks,
> > > > Mike Daly
> > > >
> > > >
> > > >
> > > > This e-mail may contain confidential and/or privileged
> information for the sole use of the intended recipient.
> > > > Any review or distribution by anyone other than the person for
> whom it was originally intended is strictly prohibited.
> > > > If you have received this e-mail in error, please contact the
> sender and delete all copies.
> > > > Opinions, conclusions or other information contained in this
> e-mail may not be that of the organization.
> > > >
> > > >
> > > >
> ------------------------------------------------------------------ ------
> > > >
> > > > _______________________________________________
> > > > Powered by www.kitware.com
> > > >
> > > > Visit other Kitware open-source projects at
> http://www.kitware.com/opensource/opensource.html
> > > >
> > > > Follow this link to subscribe/unsubscribe:
> > > > http://public.kitware.com/cgi-bin/mailman/listinfo/igstk-users
> > >
> > >
> > > ------------------------------
> > >
> > > Message: 3
> > > Date: Fri, 07 Aug 2009 15:20:36 -0400
> > > From: Patrick Cheng <cheng at isis.georgetown.edu>
> > > Subject: Re: [IGSTK-Users] IGSTK-4.2 Debug w/ OpenCV
> > > To: "Daly, Mike" <Mike.Daly at rmp.uhn.on.ca>
> > > Cc: igstk-users at public.kitware.com
> > > Message-ID: <4A7C7E84.3050500 at isis.georgetown.edu>
> > > Content-Type: text/plain; charset=ISO-8859-1; format=flowed
> > >
> > > Hi Mike,
> > >
> > > It has been fixed now.
> > >
> > > The correct solution should be:
> > >
> http://public.kitware.com/cgi-bin/viewcvs.cgi/Source/CMakeLists.txt?root=IGSTK&r1=1.49&r2=1.50&sortby=date
> > >
> > > Please check out the latest cvs version of IGSTK to get this fix.
> > >
> > > Thank you for reporting the bug.
> > >
> > > Patrick
> > >
> > > Patrick Cheng wrote:
> > > > Hi Mike,
> > > >
> > > > There is some problem with the OpenCV library on the wiki. I
> haven't got
> > > > time to investigate it.
> > > >
> > > > Supposedly, cmake will handle the linking of library files
> > > > automatically. when you build under debug, it will link to
> > > > "cxcore110d.lib" Somehow, that link is broken here.
> > > >
> > > > As a temporary fix, you can change the line 396 of
> > > > IGSTK\Source\CMakeLists.txt to
> > > >
> > > > SET(EXTRA_LIBS ${EXTRA_LIBS} cxcore110d cv110d highgui110d)
> > > >
> > > > This will work under debug, but not release mode.
> > > >
> > > > I will look into this problem further.
> > > >
> > > > Patrick
> > > >
> > > > Daly, Mike wrote:
> > > >> IGSTK users,
> > > >>
> > > >> I'm building IGSTK-4.2 with USE_OpenCV and USE_VideoImager CMake
> > > >> options ON, using the OpenCV May-08-2009 snapshot provided on the
> > > >> Wiki. I can successfully build and run in Release mode, but in
> Debug
> > > >> mode I encounter the following linker error for many of the example
> > > >> applications (e.g., VideoFrameGrabberAndViewerWebcamWin,
> NeedleBiopsy):
> > > >>
> > > >> LINK : fatal error LNK1104: cannot open file 'cxcore110.lib'
> > > >>
> > > >> Has anyone run IGSTK-4.2 in Debug mode using OpenCV? Note that
> OpenCV
> > > >> denotes Debug libraries with an extra d (e.g., cxcore110d.lib)
> under
> > > >> the lib\debug folder, so I'm not sure if it is looking for the
> wrong
> > > >> file somehow. I have the OpenCV lib\ folders in my path. Any
> help is
> > > >> appreciated.
> > > >>
> > > >> Also, does anyone know if you can build OpenCV using static
> libraries,
> > > >> since requiring .dlls sometimes gets annoying when distributing
> an .exe?
> > > >>
> > > >> Thanks,
> > > >> Mike Daly
> > > >>
> > > >>
> > > >>
> > > >> This e-mail may contain confidential and/or privileged
> information for
> > > >> the sole use of the inten ded recipient. Any review or
> distribution by
> > > >> anyone other than the person for whom it was originally intended is
> > > >> strictly prohibited. If you have received this e-mail in error,
> please
> > > >> contact the sender and delete all copies. Opinions, conclusions or
> > > >> other information contained in this e-mail may not be that of the
> > > >> organization.
> > > >>
> > > >>
> > > >>
> ------------------------------------------------------------------------
> > > >>
> > > >> _______________________________________________
> > > >> Powered by www.kitware.com
> > > >>
> > > >> Visit other Kitware open-source projects at
> > > >> http://www.kitware.com/opensource/opensource.html
> > > >>
> > > >> Follow this link to subscribe/unsubscribe:
> > > &g t;> http://public.kitware.com/cgi-bin/mailman/listinfo/igstk-users
> > > > _______________________________________________
> > > > Powered by www.kitware.com
> > > >
> > > > Visit other Kitware open-source projects at
> > > > http://www.kitware.com/opensource/opensource.html
> > > >
> > > > Follow this link to subscribe/unsubscribe:
> > > > http://public.kitware.com/cgi-bin/mailman/listinfo/igstk-users
> > > >
> > > >
> > >
> > >
> > > ------------------------------
> > >
> > > _______________________________________________
> > > IGSTK-Users mailing list
> > > IGSTK-Users at public.kitware.com
> > > http://public.kitware.com/cgi-bin/mailman/listinfo/igstk-users
> > >
> > > End of IGSTK-Users Digest, Vol 38, Issue 2
> > > ******************************************
> >
> > ___________ ______________________________________________________
> > See all the ways you can stay connected to friends and family
> > http://www.microsoft.com/windows/windowslive/default.aspx
> > -------------- next part --------------
> > An HTML attachment was scrubbed...
> > URL:
> <http://public.kitware.com/pipermail/igstk-users/attachments/20090814/62373c53/attachment-0001.htm>
> >
> > ------------------------------
> >
> > Message: 2
> > Date: Fri, 14 Aug 2009 08:37:45 -0400
> > From: Andinet Enquobahrie <andinet.enqu at kitware.com>
> > Subject: Re: [IGSTK-Users] IGSTK-Users Digest, Vol 38, Issue 2
> > To: kai yang <yk119 at hotmail.com>
> > Cc: igstk-users at public.kitware.com
> > Message-ID:
> > <4717fcd60908140537u2fce3714ud6622862b105a649 at mail.gmail.com>
> > Content-Type: text/plain; charset="iso-8859-1"
> >
> > Hi kai yang-
> >
> > Can you give us more information what yo u mean by 3D model of the
> organs?
> >
> > Andinet
> >
> > 2009/8/13 kai yang <yk119 at hotmail.com>
> >
> > > Dear IGSTK users:
> > >
> > > I have installed and run needlebiopsy.exe, working successfully with
> > > Aurora. In the GUI, there is only 3D view of CT sections in the
> lower right
> > > pannel. I would like to build a *3D model *of the organs in the
> system. So
> > > my question is:
> > >
> > > Could you tell me the workflow of building 3D models of the organ
> from CT
> > > scan and integrated with NDI tracking system, based needlebiopsy source
> > > code?
> > >
> > > Thank you and best regards
> > >
> > > Kai Yang
> > >
> > >
> > > > From: igstk-users-request at public.kitware.com
> > > > Subject: IGSTK-Users Digest, Vol 38, Issue 2
> > > > To: igstk-users at public.kitware.com
> > > > Date: Sat, 8 Aug 2009 12:00:05 -0400
> > > >
> > > > Send IGSTK-Users mailing list submissions to
> > > > igstk-users at public.kitware.com
> > > >
> > > > To subscribe or unsubscribe via the World Wide Web, visit
> > > > http://public.kitware.com/cgi-bin/mailman/listinfo/igstk-users
> > > > or, via email, send a message with subject or body 'help' to
> > > > igstk-users-request at public.kitware.com
> > > >
> > > > You can reach the person managing the list at
> > > > igstk-users-owner at public.kitware.com
> > > >
> > > > When replying, please edit your Subject line so it is more specific
> > > > than "Re: Contents of IGSTK-Users digest..."
> > > >
> > > >
> > > > Today's Topics:
> > > >
> > > > 1. IGSTK-4.2 Debug w/ OpenCV (Daly, Mike)
> > > > 2. Re: IGSTK-4.2 Debug w/ OpenCV (Patrick Cheng)
> & gt; > > 3. Re: IG STK-4.2 Debug w/ OpenCV (Patrick Cheng)
> > > >
> > > >
> > > >
> ----------------------------------------------------------------------
> > > >
> > > > Message: 1
> > > > Date: Fri, 7 Aug 2009 13:20:03 -0400
> > > > From: "Daly, Mike" <Mike.Daly at rmp.uhn.on.ca>
> > > > Subject: [IGSTK-Users] IGSTK-4.2 Debug w/ OpenCV
> > > > To: <igstk-users at public.kitware.com>
> > > > Message-ID:
> > > > <EF2641E33162A443B6A43CDBCD160A80037D65 at rmpmail01.rmpuhn.ca>
> > > > Content-Type: text/plain; charset="iso-8859-1"
> > > >
> > > > IGSTK users,
> > > >
> > > > I'm building IGSTK-4.2 with USE_OpenCV and USE_VideoImager CMake
> options
> > > ON, using the OpenCV May-08-2009 snapshot provided on the Wiki. I can
> > > successfully build and run in Release mode, but in Debug mode I enc
> ounter
> > > the following linker error for many of the example applications (e.g.,
> > > VideoFrameGrabberAndViewerWebcamWin, NeedleBiopsy):
> > > >
> > > > LINK : fatal error LNK1104: cannot open file 'cxcore110.li b'
> > > >
> > > > Has anyone run IGSTK-4.2 in Debug mode using OpenCV? Note that OpenCV
> > > denotes Debug libraries with an extra d (e.g., cxcore110d.lib)
> under the
> > > lib\debug folder, so I'm not sure if it is looking for the wrong file
> > > somehow. I have the OpenCV lib\ folders in my path. Any help is
> appreciated.
> > >
> > > >
> > > > Also, does anyone know if you can build OpenCV using static
> libraries,
> > > since requiring .dlls sometimes gets annoying when distributing an
> .exe?
> > > >
> > > > Thanks,
> > > > Mike Daly
> > > >
> > > >
> > > >
> > > >
> > > > Th is e-mail may contain confidential and/or privileged
> information for
> > > the sole use of the intended recipient.
> > > > Any review or distribution by anyone other than the person for
> whom it
> > > was originally intended is strictly prohibited.
> > > > If you have received this e-mail in error, please contact the
> sender and
> > > delete all copies.
> > > > Opinions, conclusions or other information contained in this
> e-mail may
> > > not be th at of the organization.
> > > > -------------- next part --------------
> > > > An HTML attachment was scrubbed...
> > > > URL: <
> > >
> http://public.kitware.com/pipermail/igstk-users/attachments/20090807/6a218bd5/attachment.html
> > > >
> > > >
> > > > ------------------------------
> > > >
> > > > Message: 2
> > > > Date: Fri, 07 Aug 2009 14:06:01 -0400
> > > > From: Patrick Cheng <cheng at isis.georgetown.edu>
> > > > Subject: Re: [IGSTK-Users] IGSTK-4.2 Debug w/ OpenCV
> > > > To: "Daly, Mike" <Mike.Daly at rmp.uhn.on.ca>
> > > > Cc: igstk-users at public.kitware.com
> > > > Message-ID: <4A7C6D09.5040906 at isis.georgetown.edu>
> > > > Content-Type: text/plain; charset=ISO-8859-1; format=flowed
> > > >
> > > > Hi Mike,
> > > >
> > > > There is some problem with the OpenCV library on the wiki. I
> haven't got
> > > > time to investigate it.
> > > >
> > > > Supposedly, cmake will handle the linking of library files
> > > > automatically. when you build under debug, it w ill link to
> > > > "cxcore110d.lib" Somehow, that link is broken here.
> > > >
> > > > As a temporary fix, you can change the line 396 of
> > > > IGSTK\Source\CMakeLists.txt to
> > > >
> > > > SET(EXTRA_LIBS ${EXTRA_LIBS} cxcore110d cv110d highgui110d)
> > > >
> > > > This will work under debug, but not release mode.
> > > >
> > > > I will look into this problem further.
> > > >
> > > > Patrick
> > > >
> > > > Daly, Mike wrote:
> > > > > IGSTK users,
> > > > >
> > > > > I'm building IGSTK-4.2 with USE_OpenCV and USE_VideoImager CMake
> > > options
> > > > > ON, using the OpenCV May-08-2009 snapshot provided on the Wiki.
> I can
> > > > > successfully build and run in Release mode, but in Debug mode I
> > > > > encounter the following linker error for many of the example
> > > > > applications (e.g., VideoFrameGrabberAndViewerWebcamWin,
> NeedleBiopsy):
> > > > >
> > > > > LINK : fatal error LNK1104: cannot open file 'cxcore110.lib'
> > > > &am p;gt ;
> > > > > Has anyone run IGSTK-4.2 in Debug mode using OpenCV? Note that
> OpenCV
> > > > > denotes Debug libraries with an extra d (e.g., cxcore110d.lib)
> under
> > > the
> > > > > lib\debug folder, so I'm not sure if it is looking for the
> wrong file
> > > > > somehow. I have the OpenCV lib\ folders in my path. Any help is
> > > > > appreciated.
> > > > >
> > > > > Also, does anyone know if you can build OpenCV using static
> libraries,
> > > > > since requiring .dlls sometimes gets annoying when distributing an
> > > .exe?
> > > > >
> > > > > Thanks,
> > > > > Mike Daly
> > > > >
> > > > >
> > > > >
> > > > > This e-mail may contain confidential and/or privileged
> information for
> > > the sole use of the intended recipient.
> > > > > Any review o r distribution by anyone other than the person for
> whom it
> > > was originally intended is strictly prohibited.
> > > > > If you have received this e-mail in error, please contact the
> sender an
> > > d delete all copies.
> > > > > Opinions, conclusions or other information contained in this
> e-mail may
> > > not be that of the organization.
> > > > >
> > > > >
> > > > >
> > >
> ------------------------------------------------------------------------
> > > > >
> > > > > _______________________________________________
> > > > > Powered by www.kitware.com
> > > > >
> > > > > Visit other Kitware open-source projects at
> > > http://www.kitware.com/opensource/opensource.html
> > > > >
> > > > > Follow this link to subscribe/unsubscribe:
> > > > > http://public.kitware.com/cgi-bin/m ailman/listinfo/igstk-users
> > > >
> > > >
> > > > ------------------------------
> > > >
> > > > Message: 3
> > > > Date: Fri, 07 Aug 2009 15:20:36 -0400
> > > > From: Patrick Cheng <cheng at isis.georgetown.edu>
> > > > Subject: Re: [IGSTK-Users] IGSTK-4.2 Debug w/ OpenCV
> > > > To: "Daly, Mike" <Mike.Daly at rmp.uhn.on.ca>
> > > > Cc: igstk-users at public.kitware.com
> > > > Message-ID: <4A7C7E84.3050500 at isis.georgetown.edu>
> > > > Content-Type: text/plain; charset=ISO-8859-1; format=flowed
> > > >
> > > > Hi Mike,
> > > >
> > > > It has been fixed now.
> > > >
> > > > The correct solution should be:
> > > >
> > >
> http://public.kitware.com/cgi-bin/viewcvs.cgi/Source/CMakeLists.txt?root=IGSTK&r1=1.49&r2=1.50&sortby=date
> > > >
> > > > Please check out the latest cvs version of IGSTK to get this fix.
> > > >
> > > > Thank you for reporting the bug.
> > > >
> > > > Patrick
> > > >
> > > > Patrick Cheng wrote:
> > > > > Hi Mike,
> > > > >
> > > > > There is some problem with the OpenCV library on the wiki. I
> haven't
> > > got
> > > > > time to investigate it.
> > > > >
> > > > > Supposedly, cmake will handle the linking of library files
> > > > > automatically. when you build under debug, it will link to
> > > > > "cxcore110d.lib" Somehow, that link is broken here.
> > > > >
> > > > > As a temporary fix, you can change the line 396 of
> > > > > IGSTK\Source\CMakeLists.txt to
> > > > >
> > > > > SET(EXTRA_LIBS ${EXTRA_LIBS} cxcore110d cv110d highgui110d)
> > > > >
> > > > > This will work under debug, but not release mode.
> > > > >
> > > > > I will look into this problem further.
> > > > >
> > > > > Patrick
> > > > >
> > > > > Daly, Mike wrote:
> > > > >> IGSTK users,
> > > > >>
> > > > >> I'm building IGSTK-4.2 with USE_OpenCV and USE_VideoImager CMake
> > > > >> options ON, using the OpenCV May-08-2009 snapshot provided on the
> > > > >> Wiki. I can successfully build and run in Release mode, but in
> Debug
> > > > >> mode I encounter the following linker error for many of the
> example
> > > > >> applications (e.g., VideoFrameGrabberAndViewerWebcamWin,
> > > NeedleBiopsy):
> > > > >>
> > > > >> LINK : fatal error LNK1104: cannot open file 'cxcore110.lib'
> > > > >>< BR>> >> Has anyone run IGSTK-4.2 in Debug mode using OpenCV? Note
> > > that OpenCV
> > > > >> denotes Debug libraries with an extra d (e.g., cxcore110d.lib)
> under
> > > > >> the lib\debug folder, so I'm not sure if it is looking for the
> wrong
> > > > >> file somehow. I have the OpenCV lib\ folders in my path. Any
> help is
> > > > >> appreciated.
> > > > >>
> > > > >> Also, does anyone know if you can build OpenCV using static
> libraries,
> > >
> > > > >> since requiring .dlls sometimes gets annoying when distributing an
> > > .exe?
> > > > >>
> > > > >> Thanks,
> > > > >> Mike Daly
> > > > >>
> > > > >>
> > > > >>
> > > > >> This e-mail may contain confidential and/or privileged
> information for
> > >
> > > > >> the sole use of the intended recipient. Any review or
> distribution by
> > > > >> anyone other than the person for whom it was originally
> intended is
> > > > >> strictly prohi bited. If you have received this e-mail in error,
> > > please
> > > > >> contact the sender and delete all copies. Opinions, conclusions or
> > > > >> other information contained in this e-mail may not be that of the
> > > > >> organization.
> > > > >>
> > > > >>
> > > > >>
> > >
> ------------------------------------------------------------------------
> > > > >>
> > > > >> _______________________________________________
> > > > >> Powered by www.kitware.com
> > > > >>
> > > > >> Visit other Kitware open-source projects at
> > > > >> http://www.kitware.com/opensource/op ensource.html
> > > > >>
> > > > >> Follow this link to subscribe/unsubscribe:
> > > > >> http://public.kitware.com/cgi-bin/mailman/listinfo/igstk-users
> > > > > _______________________________________________
> > > > > Powered by www.kitware.com
> > > > >
> > > > > Visit other Kitware open-source projects at
> > > &g t; > http://www.kitware.com/opensource/opensource.html
> > > > >
> > > > > Follow this link to subscribe/unsubscribe:
> > > > > http://public.kitware.com/cgi-bin/mailman/listinfo/igstk-users
> > > > >
> > > > >
> > > >
> > > >
> > > > ------------------------------
> > > >
> > > > _______________________________________________
> > > > IGSTK-Users mailing list
> > > > IGSTK-Users at public.kitware.com
> > > > http://public.kitware.com/cgi-bin/mailman/listinfo/igstk-users
> > > >
> > > > End of IGSTK-Users Digest, Vol 38, Issue 2
> > > > ******************************************
> > >
> > > ------------------------------
> > > Buddy is 10! Create a comic strip of your ultimate party and win
> $1,000! Click
> > > here <http://discover.windowslive.com/en-sg/messenger/messengeris10/>
> > >
> > > _______________________________________________
> > > Powered by www.kitware.com
> > >
> > > Visit other Kitware open-source projects at
> > > http://www.kitware.com/opensource/opensource.html
> > >
> > > Follow this link to subscribe/unsubscribe:
> > > http://public.kitware.com/cgi-bin/mailman/listinfo/igstk-users
> > >
> > -------------- next part --------------
> > An HTML attachment was scrubbed...
> > URL: <http://public.kitware.com/pipermai
> l/igstk-users/attachments/20090814/4e4b6e48/attachment.htm>
> >
> > ------------------------------
> >
> > _______________________________________________
> > IGSTK-Users mailing list
> > IGSTK-Users at public.kitware.com
> > http://public.kitware.com/cgi-bin/mailman/listinfo/igstk-users
> >
> > End of IGSTK-Users Digest, Vol 38, Issue 3
> > ******************************************
>
> ------------------------------------------------------------------------
> Buddy is 10! Create a comic strip of your ultimate party and win $1,000!
> Click here <http://discover.windowslive.com/en-sg/messenger/messengeris10/>
>
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> Powered by www.kitware.com
>
> Visit other Kitware open-source projects at http://www.kitware.com/opensource/opensource.html
>
> Follow this link to subscribe/unsubscribe:
> http://public.kitware.com/cgi-bin/mailman/listinfo/igstk-users
More information about the IGSTK-Users
mailing list