[IGSTK-Users] IGSTK-Users Digest, Vol 38, Issue 3
kai yang
yk119 at hotmail.com
Tue Aug 25 20:14:20 EDT 2009
Hi, Patric,
Thank you for your kind suggestion. I am now trying 3D slicer and will update you our progress.
Regards
Kai
> Date: Tue, 25 Aug 2009 12:48:29 -0400
> From: cheng at isis.georgetown.edu
> To: yk119 at hotmail.com
> CC: igstk-users at public.kitware.com
> Subject: Re: [IGSTK-Users] IGSTK-Users Digest, Vol 38, Issue 3
>
> Hi Kai Yang,
>
> To display 3D model, usually we will use a 3D surface mesh. To generate
> those surface mesh, you will have to segment them out first. There are
> many tools available, such as ITKSnap and 3D Slicer. If you save the
> segmentation as an ITK mesh object, IGSTK will be able to load it and
> render it in the View.
>
> Hope this will be helpful.
>
> Patrick
>
>
>
> kai yang wrote:
> > Dear Andinet,
> >
> > The 3D model of the organ in medince means to build a three dimensional
> > model of the organ from its 2D CT scans, which is in dicom format.
> >
> > Regards
> >
> > Yang Kai
> >
> > > From: igstk-users-request at public.kitware.com
> > > Subject: IGSTK-Users Digest, Vol 38, Issue 3
> > > To: igstk-users at public.kitware.com
> > > Date: Fri, 14 Aug 2009 08:43:13 -0400
> > >
> > > Send IGSTK-Users mailing list submissions to
> > > igstk-users at public.kitware.com
> > >
> > > To subscribe or unsubscribe via the World Wide Web, visit
> > > http://public.kitware.com/cgi-bin/mailman/listinfo/igstk-users
> > > or, via email, send a message with subject or body 'help' to
> > > igstk-users-request at public.kitware.com
> > >
> > > You can reach the person managing the list at
> > > igstk-users-owner at public.kitware.com
> > >
> > > When replying, please edit your Subject line so it is more specific
> > > than "Re: Contents of IGSTK-Users digest..."
> > >
> > >
> > > Today's Topics:
> > >
> > > 1. Re: IGSTK-Users Digest, Vol 38, Issue 2 (kai yang)
> > > 2. Re: IGSTK-Users Digest, Vol 38, Issue 2 (An dinet Enquobahrie)
> > >
> > >
> > > ----------------------------------------------------------------------
> > >
> > > Message: 1
> > > Date: Fri, 14 Aug 2009 11:09:09 +0800
> > > From: kai yang <yk119 at hotmail.com>
> > > Subject: Re: [IGSTK-Users] IGSTK-Users Digest, Vol 38, Issue 2
> > > To: <igstk-users at public.kitware.com>
> > > Message-ID: <BAY114-W3480F294B0F8385A963CD4E4020 at phx.gbl>
> > > Content-Type: text/plain; charset="gb2312"
> > >
> > >
> > > Dear IGSTK users:
> > >
> > >
> > >
> > > I have installed and run needlebiopsy.exe, working successfully with
> > Aurora. In the GUI, there is only 3D view of CT sections in the lower
> > right pannel. I would like to build a 3D model of the organs in the
> > system. So my question is:
> > >
> > >
> > >
> > > Could you tell me the workflow of building 3D models of the organ
> > from CT scan and integrated with NDI tracking system, based needlebiopsy
> > source code?
> > &g t;
> > >
> > >
> > > Thank you and best regards
> > >
> > >
> > >
> > > Kai Yang
> > >
> > >
> > >
> > > > From: igstk-users-request at public.kitware.com
> > > > Subject: IGSTK-Users Digest, Vol 38, Issue 2
> > > > To: igstk-users at public.kitware.com
> > > > Date: Sat, 8 Aug 2009 12:00:05 -0400
> > > >
> > > > Send IGSTK-Users mailing list submissions to
> > > > igstk-users at public.kitware.com
> > > >
> > > > To subscribe or unsubscribe via the World Wide Web, visit
> > > > http://public.kitware.com/cgi-bin/mailman/listinfo/igstk-users
> > > > or, via email, send a message with subject or body 'help' to
> > > > igstk-users-request at public.kitware.com
> > > >
> > > > You can reach the person managing the list at
> > > > igstk-users-owner at public.kitware.com
> > > >
> > > > When replying, please edit your Subject line so it is more specific
> > > > than "Re: Con tents of IGSTK-Users digest..."
> > > >
> > > >
> > > > Today's Topics:
> > > >
> > > > 1. IGSTK-4.2 Debug w/ OpenCV (Daly, Mike)
> > > > 2. Re: IGSTK-4.2 Debug w/ OpenCV (Patrick Cheng)
> > > > 3. Re: IGSTK-4.2 Debug w/ OpenCV (Patrick Cheng)
> > > >
> > > >
> > > > ----------------------------------------------------------------------
> > > >
> > > > Message: 1
> > > > Date: Fri, 7 Aug 2009 13:20:03 -0400
> > > > From: "Daly, Mike" <Mike.Daly at rmp.uhn.on.ca>
> > > > Subject: [IGSTK-Users] IGSTK-4.2 Debug w/ OpenCV
> > > > To: <igstk-users at public.kitware.com>
> > > > Message-ID:
> > > > <EF2641E33162A443B6A43CDBCD160A80037D65 at rmpmail01.rmpuhn.ca>
> > > > Content-Type: text/plain; charset="iso-8859-1"
> > > >
> > > > IGSTK users,
> > > >
> > > > I'm building IGSTK-4.2 with USE_OpenCV and USE_VideoImager CMake
> > options ON, using the OpenCV May-08-2009 snapshot provided on the Wiki.
> > I can successfully build and run in Release mode, but in Debug mode I
> > encounter the following linker error for many of the example
> > applications (e.g., VideoFrameGrabberAndViewerWebcamWin, NeedleBiopsy):
> > > >
> > > > LINK : fatal error LNK1104: cannot open file 'cxcore110.lib'
> > > >
> > > > Has anyone run IGSTK-4.2 in Debug mode using OpenCV? Note that
> > OpenCV denotes Debug libraries with an extra d (e.g., cxcore110d.lib)
> > under the lib\debug folder, so I'm not sure if it is looking for the
> > wrong file somehow. I have the OpenCV lib\ folders in my path. Any help
> > is appreciated.
> > > >
> > > > Also, does anyone know if you can build OpenCV using static
> > libraries, since requiring .dlls sometimes gets annoying when
> > distributing an .exe?
> > > >
> > > > Thanks,
> > > > Mike Daly
> > > >
> > > >
> > > >
> > > >
> > > > This e-mail may contain confidential a nd/or privileged information
> > for the sole use of the intended recipient.
> > > > Any review or distribution by anyone other than the person for whom
> > it was originally intended is strictly prohibited.
> > > > If you have received this e-mail in error, please contact the
> > sender and delete all copies.
> > > > Opinions, conclusions or other information contained in this e-mail
> > may not be that of the organization.
> > > > -------------- next part --------------
> > > > An HTML attachment was scrubbed...
> > > > URL:
> > <http://public.kitware.com/pipermail/igstk-users/attachments/20090807/6a218bd5/attachment.html>
> > > >
> > > > ------------------------------
> > > >
> > > > Message: 2
> > > > Date: Fri, 07 Aug 2009 14:06:01 -0400
> > > > From: Patrick Cheng <cheng at isis.georgetown.edu>
> > > > Subject: Re: [IGSTK-Users] IGSTK-4.2 Debug w/ OpenCV
> > > > To: "Daly, Mike" <Mike.Daly at rmp.uhn.on.ca >
> > > > Cc: igstk-users at public.kitware.com
> > > > Message-ID: <4A7C6D09.5040906 at isis.georgetown.edu>
> > > > Content-Type: text/plain; charset=ISO-8859-1; format=flowed
> > > >
> > > > Hi Mike,
> > > >
> > > > There is some problem with the OpenCV library on the wiki. I
> > haven't got
> > > > time to investigate it.
> > > >
> > > > Supposedly, cmake will handle the linking of library files
> > > > automatically. when you build under debug, it will link to
> > > > "cxcore110d.lib" Somehow, that link is broken here.
> > > >
> > > > As a temporary fix, you can change the line 396 of
> > > > IGSTK\Source\CMakeLists.txt to
> > > >
> > > > SET(EXTRA_LIBS ${EXTRA_LIBS} cxcore110d cv110d highgui110d)
> > > >
> > > > This will work under debug, but not release mode.
> > > >
> > > > I will look into this problem further.
> > > >
> > > > Patrick
> > > ; >
> > > > Daly, Mike wrote:
> > > > > IGSTK users,
> > > > >
> > > > > I'm building IGSTK-4.2 with USE_OpenCV and USE_VideoImager CMake
> > options
> > > > > ON, using the OpenCV May-08-2009 snapshot provided on the Wiki. I
> > can
> > > > > successfully build and run in Release mode, but in Debug mode I
> > > > > encounter the following linker error for many of the example
> > > > > applications (e.g., VideoFrameGrabberAndViewerWebcamWin,
> > NeedleBiopsy):
> > > > >
> > > > > LINK : fatal error LNK1104: cannot open file 'cxcore110.lib'
> > > > >
> > > > > Has anyone run IGSTK-4.2 in Debug mode using OpenCV? Note that
> > OpenCV
> > > > > denotes Debug libraries with an extra d (e.g., cxcore110d.lib)
> > under the
> > > > > lib\debug folder, so I'm not sure if it is looking for the wrong
> > file
> > > > > somehow. I have the OpenCV lib\ folders in my path. Any help is
> > > > > appreciated.
> > > > >
> > > > > Also, does anyone know if you can build OpenCV using static
> > libraries,
> > > > > since requiring .dlls sometimes gets annoying when distributing
> > an .exe?
> > > > >
> > > > > Thanks,
> > > > > Mike Daly
> > > > >
> > > > >
> > > > >
> > > > > This e-mail may contain confidential and/or privileged
> > information for the sole use of the intended recipient.
> > > > > Any review or distribution by anyone other than the person for
> > whom it was originally intended is strictly prohibited.
> > > > > If you have received this e-mail in error, please contact the
> > sender and delete all copies.
> > > > > Opinions, conclusions or other information contained in this
> > e-mail may not be that of the organization.
> > > > >
> > > > >
> > > > >
> > ------------------------------------------------------------------ ------
> > > > >
> > > > > _______________________________________________
> > > > > Powered by www.kitware.com
> > > > >
> > > > > Visit other Kitware open-source projects at
> > http://www.kitware.com/opensource/opensource.html
> > > > >
> > > > > Follow this link to subscribe/unsubscribe:
> > > > > http://public.kitware.com/cgi-bin/mailman/listinfo/igstk-users
> > > >
> > > >
> > > > ------------------------------
> > > >
> > > > Message: 3
> > > > Date: Fri, 07 Aug 2009 15:20:36 -0400
> > > > From: Patrick Cheng <cheng at isis.georgetown.edu>
> > > > Subject: Re: [IGSTK-Users] IGSTK-4.2 Debug w/ OpenCV
> > > > To: "Daly, Mike" <Mike.Daly at rmp.uhn.on.ca>
> > > > Cc: igstk-users at public.kitware.com
> > > > Message-ID: <4A7C7E84.3050500 at isis.georgetown.edu>
> > > > Content-Type: text/plain; charset=ISO-8859-1; format=flowed
> > > >
> > > > Hi Mike,
> > > >
> > > > It has been fixed now.
> > > >
> > > > The correct solution should be:
> > > >
> > http://public.kitware.com/cgi-bin/viewcvs.cgi/Source/CMakeLists.txt?root=IGSTK&r1=1.49&r2=1.50&sortby=date
> > > >
> > > > Please check out the latest cvs version of IGSTK to get this fix.
> > > >
> > > > Thank you for reporting the bug.
> > > >
> > > > Patrick
> > > >
> > > > Patrick Cheng wrote:
> > > > > Hi Mike,
> > > > >
> > > > > There is some problem with the OpenCV library on the wiki. I
> > haven't got
> > > > > time to investigate it.
> > > > >
> > > > > Supposedly, cmake will handle the linking of library files
> > > > > automatically. when you build under debug, it will link to
> > > > > "cxcore110d.lib" Somehow, that link is broken here.
> > > > >
> > > > > As a temporary fix, you can change the line 396 of
> > > > > IGSTK\Source\CMakeLists.txt to
> > > > >
> > > > > SET(EXTRA_LIBS ${EXTRA_LIBS} cxcore110d cv110d highgui110d)
> > > > >
> > > > > This will work under debug, but not release mode.
> > > > >
> > > > > I will look into this problem further.
> > > > >
> > > > > Patrick
> > > > >
> > > > > Daly, Mike wrote:
> > > > >> IGSTK users,
> > > > >>
> > > > >> I'm building IGSTK-4.2 with USE_OpenCV and USE_VideoImager CMake
> > > > >> options ON, using the OpenCV May-08-2009 snapshot provided on the
> > > > >> Wiki. I can successfully build and run in Release mode, but in
> > Debug
> > > > >> mode I encounter the following linker error for many of the example
> > > > >> applications (e.g., VideoFrameGrabberAndViewerWebcamWin,
> > NeedleBiopsy):
> > > > >>
> > > > >> LINK : fatal error LNK1104: cannot open file 'cxcore110.lib'
> > > > >>
> > > > >> Has anyone run IGSTK-4.2 in Debug mode using OpenCV? Note that
> > OpenCV
> > > > >> denotes Debug libraries with an extra d (e.g., cxcore110d.lib)
> > under
> > > > >> the lib\debug folder, so I'm not sure if it is looking for the
> > wrong
> > > > >> file somehow. I have the OpenCV lib\ folders in my path. Any
> > help is
> > > > >> appreciated.
> > > > >>
> > > > >> Also, does anyone know if you can build OpenCV using static
> > libraries,
> > > > >> since requiring .dlls sometimes gets annoying when distributing
> > an .exe?
> > > > >>
> > > > >> Thanks,
> > > > >> Mike Daly
> > > > >>
> > > > >>
> > > > >>
> > > > >> This e-mail may contain confidential and/or privileged
> > information for
> > > > >> the sole use of the inten ded recipient. Any review or
> > distribution by
> > > > >> anyone other than the person for whom it was originally intended is
> > > > >> strictly prohibited. If you have received this e-mail in error,
> > please
> > > > >> contact the sender and delete all copies. Opinions, conclusions or
> > > > >> other information contained in this e-mail may not be that of the
> > > > >> organization.
> > > > >>
> > > > >>
> > > > >>
> > ------------------------------------------------------------------------
> > > > >>
> > > > >> _______________________________________________
> > > > >> Powered by www.kitware.com
> > > > >>
> > > > >> Visit other Kitware open-source projects at
> > > > >> http://www.kitware.com/opensource/opensource.html
> > > > >>
> > > > >> Follow this link to subscribe/unsubscribe:
> > > > &g t;> http://public.kitware.com/cgi-bin/mailman/listinfo/igstk-users
> > > > > _______________________________________________
> > > > > Powered by www.kitware.com
> > > > >
> > > > > Visit other Kitware open-source projects at
> > > > > http://www.kitware.com/opensource/opensource.html
> > > > >
> > > > > Follow this link to subscribe/unsubscribe:
> > > > > http://public.kitware.com/cgi-bin/mailman/listinfo/igstk-users
> > > > >
> > > > >
> > > >
> > > >
> > > > ------------------------------
> > > >
> > > > _______________________________________________
> > > > IGSTK-Users mailing list
> > > > IGSTK-Users at public.kitware.com
> > > > http://public.kitware.com/cgi-bin/mailman/listinfo/igstk-users
> > > >
> > > > End of IGSTK-Users Digest, Vol 38, Issue 2
> > > > ******************************************
> > >
> > > ___________ ______________________________________________________
> > > See all the ways you can stay connected to friends and family
> > > http://www.microsoft.com/windows/windowslive/default.aspx
> > > -------------- next part --------------
> > > An HTML attachment was scrubbed...
> > > URL:
> > <http://public.kitware.com/pipermail/igstk-users/attachments/20090814/62373c53/attachment-0001.htm>
> > >
> > > ------------------------------
> > >
> > > Message: 2
> > > Date: Fri, 14 Aug 2009 08:37:45 -0400
> > > From: Andinet Enquobahrie <andinet.enqu at kitware.com>
> > > Subject: Re: [IGSTK-Users] IGSTK-Users Digest, Vol 38, Issue 2
> > > To: kai yang <yk119 at hotmail.com>
> > > Cc: igstk-users at public.kitware.com
> > > Message-ID:
> > > <4717fcd60908140537u2fce3714ud6622862b105a649 at mail.gmail.com>
> > > Content-Type: text/plain; charset="iso-8859-1"
> > >
> > > Hi kai yang-
> > >
> > > Can you give us more information what yo u mean by 3D model of the
> > organs?
> > >
> > > Andinet
> > >
> > > 2009/8/13 kai yang <yk119 at hotmail.com>
> > >
> > > > Dear IGSTK users:
> > > >
> > > > I have installed and run needlebiopsy.exe, working successfully with
> > > > Aurora. In the GUI, there is only 3D view of CT sections in the
> > lower right
> > > > pannel. I would like to build a *3D model *of the organs in the
> > system. So
> > > > my question is:
> > > >
> > > > Could you tell me the workflow of building 3D models of the organ
> > from CT
> > > > scan and integrated with NDI tracking system, based needlebiopsy source
> > > > code?
> > > >
> > > > Thank you and best regards
> > > >
> > > > Kai Yang
> > > >
> > > >
> > > > > From: igstk-users-request at public.kitware.com
> > > > > Subject: IGSTK-Users Digest, Vol 38, Issue 2
> > > > > To: igstk-users at public.kitware.com
> > > > > Date: Sat, 8 Aug 2009 12:00:05 -0400
> > > > >
> > > > > Send IGSTK-Users mailing list submissions to
> > > > > igstk-users at public.kitware.com
> > > > >
> > > > > To subscribe or unsubscribe via the World Wide Web, visit
> > > > > http://public.kitware.com/cgi-bin/mailman/listinfo/igstk-users
> > > > > or, via email, send a message with subject or body 'help' to
> > > > > igstk-users-request at public.kitware.com
> > > > >
> > > > > You can reach the person managing the list at
> > > > > igstk-users-owner at public.kitware.com
> > > > >
> > > > > When replying, please edit your Subject line so it is more specific
> > > > > than "Re: Contents of IGSTK-Users digest..."
> > > > >
> > > > >
> > > > > Today's Topics:
> > > > >
> > > > > 1. IGSTK-4.2 Debug w/ OpenCV (Daly, Mike)
> > > > > 2. Re: IGSTK-4.2 Debug w/ OpenCV (Patrick Cheng)
> > & gt; > > 3. Re: IG STK-4.2 Debug w/ OpenCV (Patrick Cheng)
> > > > >
> > > > >
> > > > >
> > ----------------------------------------------------------------------
> > > > >
> > > > > Message: 1
> > > > > Date: Fri, 7 Aug 2009 13:20:03 -0400
> > > > > From: "Daly, Mike" <Mike.Daly at rmp.uhn.on.ca>
> > > > > Subject: [IGSTK-Users] IGSTK-4.2 Debug w/ OpenCV
> > > > > To: <igstk-users at public.kitware.com>
> > > > > Message-ID:
> > > > > <EF2641E33162A443B6A43CDBCD160A80037D65 at rmpmail01.rmpuhn.ca>
> > > > > Content-Type: text/plain; charset="iso-8859-1"
> > > > >
> > > > > IGSTK users,
> > > > >
> > > > > I'm building IGSTK-4.2 with USE_OpenCV and USE_VideoImager CMake
> > options
> > > > ON, using the OpenCV May-08-2009 snapshot provided on the Wiki. I can
> > > > successfully build and run in Release mode, but in Debug mode I enc
> > ounter
> > > > the following linker error for many of the example applications (e.g.,
> > > > VideoFrameGrabberAndViewerWebcamWin, NeedleBiopsy):
> > > > >
> > > > > LINK : fatal error LNK1104: cannot open file 'cxcore110.li b'
> > > > >
> > > > > Has anyone run IGSTK-4.2 in Debug mode using OpenCV? Note that OpenCV
> > > > denotes Debug libraries with an extra d (e.g., cxcore110d.lib)
> > under the
> > > > lib\debug folder, so I'm not sure if it is looking for the wrong file
> > > > somehow. I have the OpenCV lib\ folders in my path. Any help is
> > appreciated.
> > > >
> > > > >
> > > > > Also, does anyone know if you can build OpenCV using static
> > libraries,
> > > > since requiring .dlls sometimes gets annoying when distributing an
> > .exe?
> > > > >
> > > > > Thanks,
> > > > > Mike Daly
> > > > >
> > > > >
> > > > >
> > > > >
> > > > > Th is e-mail may contain confidential and/or privileged
> > information for
> > > > the sole use of the intended recipient.
> > > > > Any review or distribution by anyone other than the person for
> > whom it
> > > > was originally intended is strictly prohibited.
> > > > > If you have received this e-mail in error, please contact the
> > sender and
> > > > delete all copies.
> > > > > Opinions, conclusions or other information contained in this
> > e-mail may
> > > > not be th at of the organization.
> > > > > -------------- next part --------------
> > > > > An HTML attachment was scrubbed...
> > > > > URL: <
> > > >
> > http://public.kitware.com/pipermail/igstk-users/attachments/20090807/6a218bd5/attachment.html
> > > > >
> > > > >
> > > > > ------------------------------
> > > > >
> > > > > Message: 2
> > > > > Date: Fri, 07 Aug 2009 14:06:01 -0400
> > > > > From: Patrick Cheng <cheng at isis.georgetown.edu>
> > > > > Subject: Re: [IGSTK-Users] IGSTK-4.2 Debug w/ OpenCV
> > > > > To: "Daly, Mike" <Mike.Daly at rmp.uhn.on.ca>
> > > > > Cc: igstk-users at public.kitware.com
> > > > > Message-ID: <4A7C6D09.5040906 at isis.georgetown.edu>
> > > > > Content-Type: text/plain; charset=ISO-8859-1; format=flowed
> > > > >
> > > > > Hi Mike,
> > > > >
> > > > > There is some problem with the OpenCV library on the wiki. I
> > haven't got
> > > > > time to investigate it.
> > > > >
> > > > > Supposedly, cmake will handle the linking of library files
> > > > > automatically. when you build under debug, it w ill link to
> > > > > "cxcore110d.lib" Somehow, that link is broken here.
> > > > >
> > > > > As a temporary fix, you can change the line 396 of
> > > > > IGSTK\Source\CMakeLists.txt to
> > > > >
> > > > > SET(EXTRA_LIBS ${EXTRA_LIBS} cxcore110d cv110d highgui110d)
> > > > >
> > > > > This will work under debug, but not release mode.
> > > > >
> > > > > I will look into this problem further.
> > > > >
> > > > > Patrick
> > > > >
> > > > > Daly, Mike wrote:
> > > > > > IGSTK users,
> > > > > >
> > > > > > I'm building IGSTK-4.2 with USE_OpenCV and USE_VideoImager CMake
> > > > options
> > > > > > ON, using the OpenCV May-08-2009 snapshot provided on the Wiki.
> > I can
> > > > > > successfully build and run in Release mode, but in Debug mode I
> > > > > > encounter the following linker error for many of the example
> > > > > > applications (e.g., VideoFrameGrabberAndViewerWebcamWin,
> > NeedleBiopsy):
> > > > > >
> > > > > > LINK : fatal error LNK1104: cannot open file 'cxcore110.lib'
> > > > > &am p;gt ;
> > > > > > Has anyone run IGSTK-4.2 in Debug mode using OpenCV? Note that
> > OpenCV
> > > > > > denotes Debug libraries with an extra d (e.g., cxcore110d.lib)
> > under
> > > > the
> > > > > > lib\debug folder, so I'm not sure if it is looking for the
> > wrong file
> > > > > > somehow. I have the OpenCV lib\ folders in my path. Any help is
> > > > > > appreciated.
> > > > > >
> > > > > > Also, does anyone know if you can build OpenCV using static
> > libraries,
> > > > > > since requiring .dlls sometimes gets annoying when distributing an
> > > > .exe?
> > > > > >
> > > > > > Thanks,
> > > > > > Mike Daly
> > > > > >
> > > > > >
> > > > > >
> > > > > > This e-mail may contain confidential and/or privileged
> > information for
> > > > the sole use of the intended recipient.
> > > > > > Any review o r distribution by anyone other than the person for
> > whom it
> > > > was originally intended is strictly prohibited.
> > > > > > If you have received this e-mail in error, please contact the
> > sender an
> > > > d delete all copies.
> > > > > > Opinions, conclusions or other information contained in this
> > e-mail may
> > > > not be that of the organization.
> > > > > >
> > > > > >
> > > > > >
> > > >
> > ------------------------------------------------------------------------
> > > > > >
> > > > > > _______________________________________________
> > > > > > Powered by www.kitware.com
> > > > > >
> > > > > > Visit other Kitware open-source projects at
> > > > http://www.kitware.com/opensource/opensource.html
> > > > > >
> > > > > > Follow this link to subscribe/unsubscribe:
> > > > > > http://public.kitware.com/cgi-bin/m ailman/listinfo/igstk-users
> > > > >
> > > > >
> > > > > ------------------------------
> > > > >
> > > > > Message: 3
> > > > > Date: Fri, 07 Aug 2009 15:20:36 -0400
> > > > > From: Patrick Cheng <cheng at isis.georgetown.edu>
> > > > > Subject: Re: [IGSTK-Users] IGSTK-4.2 Debug w/ OpenCV
> > > > > To: "Daly, Mike" <Mike.Daly at rmp.uhn.on.ca>
> > > > > Cc: igstk-users at public.kitware.com
> > > > > Message-ID: <4A7C7E84.3050500 at isis.georgetown.edu>
> > > > > Content-Type: text/plain; charset=ISO-8859-1; format=flowed
> > > > >
> > > > > Hi Mike,
> > > > >
> > > > > It has been fixed now.
> > > > >
> > > > > The correct solution should be:
> > > > >
> > > >
> > http://public.kitware.com/cgi-bin/viewcvs.cgi/Source/CMakeLists.txt?root=IGSTK&r1=1.49&r2=1.50&sortby=date
> > > > >
> > > > > Please check out the latest cvs version of IGSTK to get this fix.
> > > > >
> > > > > Thank you for reporting the bug.
> > > > >
> > > > > Patrick
> > > > >
> > > > > Patrick Cheng wrote:
> > > > > > Hi Mike,
> > > > > >
> > > > > > There is some problem with the OpenCV library on the wiki. I
> > haven't
> > > > got
> > > > > > time to investigate it.
> > > > > >
> > > > > > Supposedly, cmake will handle the linking of library files
> > > > > > automatically. when you build under debug, it will link to
> > > > > > "cxcore110d.lib" Somehow, that link is broken here.
> > > > > >
> > > > > > As a temporary fix, you can change the line 396 of
> > > > > > IGSTK\Source\CMakeLists.txt to
> > > > > >
> > > > > > SET(EXTRA_LIBS ${EXTRA_LIBS} cxcore110d cv110d highgui110d)
> > > > > >
> > > > > > This will work under debug, but not release mode.
> > > > > >
> > > > > > I will look into this problem further.
> > > > > >
> > > > > > Patrick
> > > > > >
> > > > > > Daly, Mike wrote:
> > > > > >> IGSTK users,
> > > > > >>
> > > > > >> I'm building IGSTK-4.2 with USE_OpenCV and USE_VideoImager CMake
> > > > > >> options ON, using the OpenCV May-08-2009 snapshot provided on the
> > > > > >> Wiki. I can successfully build and run in Release mode, but in
> > Debug
> > > > > >> mode I encounter the following linker error for many of the
> > example
> > > > > >> applications (e.g., VideoFrameGrabberAndViewerWebcamWin,
> > > > NeedleBiopsy):
> > > > > >>
> > > > > >> LINK : fatal error LNK1104: cannot open file 'cxcore110.lib'
> > > > > >>< BR>> >> Has anyone run IGSTK-4.2 in Debug mode using OpenCV? Note
> > > > that OpenCV
> > > > > >> denotes Debug libraries with an extra d (e.g., cxcore110d.lib)
> > under
> > > > > >> the lib\debug folder, so I'm not sure if it is looking for the
> > wrong
> > > > > >> file somehow. I have the OpenCV lib\ folders in my path. Any
> > help is
> > > > > >> appreciated.
> > > > > >>
> > > > > >> Also, does anyone know if you can build OpenCV using static
> > libraries,
> > > >
> > > > > >> since requiring .dlls sometimes gets annoying when distributing an
> > > > .exe?
> > > > > >>
> > > > > >> Thanks,
> > > > > >> Mike Daly
> > > > > >>
> > > > > >>
> > > > > >>
> > > > > >> This e-mail may contain confidential and/or privileged
> > information for
> > > >
> > > > > >> the sole use of the intended recipient. Any review or
> > distribution by
> > > > > >> anyone other than the person for whom it was originally
> > intended is
> > > > > >> strictly prohi bited. If you have received this e-mail in error,
> > > > please
> > > > > >> contact the sender and delete all copies. Opinions, conclusions or
> > > > > >> other information contained in this e-mail may not be that of the
> > > > > >> organization.
> > > > > >>
> > > > > >>
> > > > > >>
> > > >
> > ------------------------------------------------------------------------
> > > > > >>
> > > > > >> _______________________________________________
> > > > > >> Powered by www.kitware.com
> > > > > >>
> > > > > >> Visit other Kitware open-source projects at
> > > > > >> http://www.kitware.com/opensource/op ensource.html
> > > > > >>
> > > > > >> Follow this link to subscribe/unsubscribe:
> > > > > >> http://public.kitware.com/cgi-bin/mailman/listinfo/igstk-users
> > > > > > _______________________________________________
> > > > > > Powered by www.kitware.com
> > > > > >
> > > > > > Visit other Kitware open-source projects at
> > > > &g t; > http://www.kitware.com/opensource/opensource.html
> > > > > >
> > > > > > Follow this link to subscribe/unsubscribe:
> > > > > > http://public.kitware.com/cgi-bin/mailman/listinfo/igstk-users
> > > > > >
> > > > > >
> > > > >
> > > > >
> > > > > ------------------------------
> > > > >
> > > > > _______________________________________________
> > > > > IGSTK-Users mailing list
> > > > > IGSTK-Users at public.kitware.com
> > > > > http://public.kitware.com/cgi-bin/mailman/listinfo/igstk-users
> > > > >
> > > > > End of IGSTK-Users Digest, Vol 38, Issue 2
> > > > > ******************************************
> > > >
> > > > ------------------------------
> > > > Buddy is 10! Create a comic strip of your ultimate party and win
> > $1,000! Click
> > > > here <http://discover.windowslive.com/en-sg/messenger/messengeris10/>
> > > >
> > > > _______________________________________________
> > > > Powered by www.kitware.com
> > > >
> > > > Visit other Kitware open-source projects at
> > > > http://www.kitware.com/opensource/opensource.html
> > > >
> > > > Follow this link to subscribe/unsubscribe:
> > > > http://public.kitware.com/cgi-bin/mailman/listinfo/igstk-users
> > > >
> > > -------------- next part --------------
> > > An HTML attachment was scrubbed...
> > > URL: <http://public.kitware.com/pipermai
> > l/igstk-users/attachments/20090814/4e4b6e48/attachment.htm>
> > >
> > > ------------------------------
> > >
> > > _______________________________________________
> > > IGSTK-Users mailing list
> > > IGSTK-Users at public.kitware.com
> > > http://public.kitware.com/cgi-bin/mailman/listinfo/igstk-users
> > >
> > > End of IGSTK-Users Digest, Vol 38, Issue 3
> > > ******************************************
> >
> > ------------------------------------------------------------------------
> > Buddy is 10! Create a comic strip of your ultimate party and win $1,000!
> > Click here <http://discover.windowslive.com/en-sg/messenger/messengeris10/>
> >
> >
> > ------------------------------------------------------------------------
> >
> > _______________________________________________
> > Powered by www.kitware.com
> >
> > Visit other Kitware open-source projects at http://www.kitware.com/opensource/opensource.html
> >
> > Follow this link to subscribe/unsubscribe:
> > http://public.kitware.com/cgi-bin/mailman/listinfo/igstk-users
_________________________________________________________________
Share your memories online with anyone you want.
http://www.microsoft.com/singapore/windows/windowslive/products/photos-share.aspx?tab=1
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://public.kitware.com/pipermail/igstk-users/attachments/20090826/c18f0936/attachment.html>
More information about the IGSTK-Users
mailing list