ITK/Getting Started/Build/Linux: Difference between revisions
No edit summary |
No edit summary |
||
| Line 1: | Line 1: | ||
Once you | To get the latest ITK source code, you must use git. If you do not have git installed, please install it from your package manager: | ||
sudo apt-get install git | |||
Once done, you need to download ITK source code with this terminal command: | |||
git clone https://itk.org/ITK.git | git clone https://itk.org/ITK.git | ||
| Line 5: | Line 9: | ||
you will need to create a bin directory in the ITK directory: | you will need to create a bin directory in the ITK directory: | ||
$ | $ mkdir bin | ||
Change directory to the binary directory, and run the CMake configuration tool | Change directory to the binary directory, and run the CMake configuration tool | ||
$ cd bin | $ cd bin | ||
$ | $ ccmake .. | ||
Initially, you get the CMake interface with an "EMPTY CACHE" message. Press "c" to configure with default settings and then "g" to generate the Makefiles. (If the "g" command is not available, you may need to press "c" to configure again). This will also exit CMake if successful. | |||
<hr> | |||
If it's still not work, just quit with "q" and retry a | |||
''$ ccmake -DITK_USE_REVIEW=OFF ..'' | |||
and configure it like this : | |||
BUILD_DOXYGEN *OFF | BUILD_DOXYGEN *OFF | ||
BUILD_EXAMPLES *ON | BUILD_EXAMPLES *ON | ||
| Line 23: | Line 33: | ||
CMAKE_INSTALL_PREFIX */usr/local | CMAKE_INSTALL_PREFIX */usr/local | ||
ITK_USE_KWSTYLE *OFF | ITK_USE_KWSTYLE *OFF | ||
and press "g" if it appears, if not, "c" and then "g". | and press "g" if it appears, if not, "c" and then "g". | ||
<hr> | |||
Then, run <tt>make</tt> to compile ITK | Then, run <tt>make</tt> to compile ITK | ||
$ | $ make -j4 | ||
The <tt>-j4</tt> option will use parallel compilation if you have more than 1 processor. Compilation will take for a long time, even on a fast desktop (I have 4 processors, 16G of RAM and a 64 bit architecture). Once it finishes successfully you can install the files. Note that with the options above, the files will be installed to the same places where the Ubuntu package would put them. | The <tt>-j4</tt> option will use parallel compilation if you have more than 1 processor. Compilation will take for a long time, even on a fast desktop (I have 4 processors, 16G of RAM and a 64 bit architecture). Once it finishes successfully you can install the files. Note that with the options above, the files will be installed to the same places where the Ubuntu package would put them. | ||
$ sudo make install | $ sudo make install | ||
=Software Guide= | |||
If you need more supports, feel free to consult the ITK Software Guide here : https://itk.org/ITKSoftwareGuide/html/Book1/ITKSoftwareGuide-Book1ch2.html#x27-170002 | |||
Revision as of 19:19, 7 July 2016
To get the latest ITK source code, you must use git. If you do not have git installed, please install it from your package manager:
sudo apt-get install git
Once done, you need to download ITK source code with this terminal command:
git clone https://itk.org/ITK.git
you will need to create a bin directory in the ITK directory:
$ mkdir bin
Change directory to the binary directory, and run the CMake configuration tool
$ cd bin $ ccmake ..
Initially, you get the CMake interface with an "EMPTY CACHE" message. Press "c" to configure with default settings and then "g" to generate the Makefiles. (If the "g" command is not available, you may need to press "c" to configure again). This will also exit CMake if successful.
If it's still not work, just quit with "q" and retry a
$ ccmake -DITK_USE_REVIEW=OFF ..
and configure it like this :
BUILD_DOXYGEN *OFF BUILD_EXAMPLES *ON BUILD_SHARED_LIBS *ON BUILD_TESTING *ON CMAKE_BACKWARDS_COMPATIBILITY *2.4 CMAKE_BUILD_TYPE *Release CMAKE_INSTALL_PREFIX */usr/local ITK_USE_KWSTYLE *OFF
and press "g" if it appears, if not, "c" and then "g".
Then, run make to compile ITK
$ make -j4
The -j4 option will use parallel compilation if you have more than 1 processor. Compilation will take for a long time, even on a fast desktop (I have 4 processors, 16G of RAM and a 64 bit architecture). Once it finishes successfully you can install the files. Note that with the options above, the files will be installed to the same places where the Ubuntu package would put them.
$ sudo make install
Software Guide
If you need more supports, feel free to consult the ITK Software Guide here : https://itk.org/ITKSoftwareGuide/html/Book1/ITKSoftwareGuide-Book1ch2.html#x27-170002
