ITK/How to make a Release

From KitwarePublic
Jump to: navigation, search

How To Make an ITK Release

This page describes the sequence of steps required for making an ITK release. There are typically two feature releases a year, around December and June, and one to three bug fixes between feature releases.

Bug fix release general steps

  1. Create tag (with GPG signature) for release. Do not forget to update ITK revision number in CMakeLists.txt.
  2. Create release notes:
    git shortlog --no-merges v4.11.0..release
  3. Write blog post in a google doc and share it with the Comm’ team.
  4. Use same text (2) to prepare mailing list message
  5. Create tarballs and upload them on SourceForge
  6. Send email to Comm’ team so they can update links to tarballs on Verify that links work!
  7. Send email to mailing list (user, develop, community), add post in the ITKBarCamp Google+ community and publish blog post.

For details of each step, refer to the sections below.

Integrate bug fixes in the release branch

  • Update master and release branches
git fetch
git checkout master
git reset --hard origin/master
git checkout release
git reset --hard origin/release
  • List differences between last release and current release branch
git shortlog --no-merges v4.10.0..release
  • Merge bug fix commits in release. Topic branch should be named <bug-name>-for-release
    • If topic branch was created from release branch, checkout topic in new branch (see command lines on gerrit)
    • If topic branch was created on master, cherry-pick commit (see command line on gerrit) on a topic branch created off release. The commit will be visible twice in the history once release in merged into master.
    • Merge new branch on release:
      git merge <bug-name>-for-release --no-ff
    • Update gerrit: write “Merged to release.” in merged topic.
  • Merge release into master (so master keeps track of release history)
git checkout master
git pull
git merge release
git push origin master release
  • For patches that need to be merged to the "release-3.20" branch, they are first merged to release-3.20, then release-3.20 is merged to the release branch with 'git merge -s ours' to avoid a huge number of merge conflicts. Then, release is merged into master.

Pre-tag activities

  • Make sure to update the versions in the top level CMakeLists.txt as described below
    • For bugfix releases, this is done before the tag. For feature releases, this is done after the final tag.
  • Make sure all new remote modules are built in by the Doxygen build
  • Update the WikiExamples and SphinxExamples remote modules.

Tag the ITK repository

Tagging the repository should only be done with the agreement of the developers after a tcon.

Update your repository with

use the commmand

  git checkout master
  git pull

to make sure that your source tree is updated. This must correspond to a source tree that has been fully tested in the Dashboard.

When tagging a bugfix release on the release branch, make sure to bump the ITK_VERSION_PATCH variable in the top level CMakeLists.txt before tagging. When tagging a feature release, make sure to bump the ITK_VERSION_MINOR version on the master branch after tagging.

Tag with a branch point reference

Note: At this time, Brad King, Matt McCormick, Francois Budin, or Jean-Christophe Fillion-Robin are the person to do this because of their trusted GPG key.

In the source tree that you just updated, use the command

 git tag -m "ITK 4.5-rc03" -s v4.5rc03 f9d99ca3ad00116393c4e2ce899beb00695ebb24

where, of course you change v4.5rc03 for the correct release number and the hash to the correct commit.

Push it to the repository

 git push origin v4.5rc03

Update the release branch

Update the release branch only during features releases after the tag for the release. Perform a fast-forward merge of master into release:

 git checkout release
 git reset --hard origin/release
 git merge --ff-only <version tag>
 git push origin release
 git checkout master

This will not create a new commit, only move the release branch to the tag, i.e. it will be fast forward.

For minor releases, merge release branch into master branch as for a normal commit, and resolve conflict (arising from mismatch in version number) by keeping master branch versions.

Mark the release as resolved on the issue tracker

Projects -> ITK -> Versions

Schedule the next release, and update the Release Schedule page.

Prepare Release Notes

Release notes are prepared in a Google Doc.

A list of authors and new authors can be computed with this script.

Todo: Add more description of the structure of release notes.

Add New Remote Modules to Nightly Builds

Some builds may be difficult to add due to third-party dependencies.

Send Contributor Momentos

This file:

can be ordered from ShapeWays and sent to contributors. Deb Howell has generated excellent packaging.

Archive ExternalData

Set the environmental or CMake variable ExternalData_OBJECT_STORES to a local directory. E.g.

 export ExternalData_OBJECT_STORES=${HOME}/data

Pre-populate the store with the contents of the 'InsightData' tarballs from a previous release. Once the tarball extracted, move the content of its subfolder called .ExternalData in your local ExternalData_OBJECT_STORES directory.

Then, from the ITK build directory, configure ITK, enable ITK_WRAP_PYTHON, ITK_LEGACY_SILENT , BUILD_TESTING and BUILD_EXAMPLES.

If you have previously enabled remote modules using the same ITK source directory, either verify that they are enabled in your current build, or remove their source directory that has been added inside ITK source directory (Modules/Remote/{name_of_remote_module}).

Build the ITKData target

 make ITKData

This will download new testing data since the previous release.

Next, run the script from within the ITK source directory:

 ./Utilities/Maintenance/ ${ExternalData_OBJECT_STORES}

Do not use --cleanup as for the purpose of the GitHub resource, it is important to keep the older files: some are from older revisions of ITK, and people continue to use the older versions of ITK and request the testing data.

This is will verify all contents, fully populate the MD5/ and SHA512/ directories in the object store, and create any missing .md5 or .sha512 content links. If any new content link files are created, commit the result.

Next, archive the data on Create a folder, e.g. 4.11, in ITK/ITKTestingData

 ./Utilities/Maintenance/ --object-store ${HOME}/data --parent-id <the-girder-id-of-the-folder-created> --api-key <your-girder-user-api-key>

This script requires the girder-client Python package install from Girder master, November 2016 or later, (Girder >2.0.0).

Run the script


to upload the testing data from a local store on the ITK and Community.

This script requires that pydas is installed. Note: If you get the following error message:
pydas.exceptions.InvalidPolicy: 'Request failed with HTTP status code 200, Midas Server error code -151, and response content {"stat":"fail","message":"Invalid policy or itemid","code":"-151"}'
make sure you have the permissions to write in the ITK collection on the Midas server.

Archive the InsightData contents on ITK's file server at Kitware

 rsync -v -r /tmp/InsightToolkit-4.9.0/.ExternalData/MD5/ public:/projects/Insight/WWW/InsightWeb/files/ExternalData/MD5/

Update the data archive at

Prepare tarballs

InsightToolkit tarball

Once the repository has been tagged, we use the following script in the repository to create the tarballs:

   Utilities/Maintenance/SourceTarball.bash --tgz --txz --zip

Note: tarballs can be created from a specific commit. The user can manually specify the version of ITK used to name the output files:

   Utilities/Maintenance/SourceTarball.bash -v 4.10.1 11f687df0347df9c1fee757745c1f1976ec3cbfe

After the tarballs have been uploaded to SourceForge, check their MD5 sums (the "i" info button on and locally with the 'md5sum' command). Also, download them from SourceForge and run an Experimental build on Linux, OSX, and Windows.

ITK Software Guide

Bump the ITK version in Superbuild/ExternalITKv4.cmake.

Set the DRAFT_WATERMARK CMake varable to OFF to remove the draft watermark.

Set the PDF_QUALITY_LEVEL CMake configuration option to "Screen" for the electronic version and "Printer" for the print version.


To create ItkSoftwareGuide.pdf to put at from InsightSoftwareGuide-Book{1,2}-4.X.0.pdf, use pdftk

 pdftk ITKSoftwareGuide-Book1.pdf ITKSoftwareGuide-Book2.pdf cat output /tmp/ItkSoftwareGuide.pdf

Prepare the print version

Set the PDF_QUALITY_LEVEL to "Printer", and rebuild.

Remove the junk initial page, and then also one of the blank pages so pages fall on "left-side / right-side" as formatted.

 pdftk ITKSoftwareGuide-Book1.pdf cat 2-3 5-end output /tmp/ITKSoftwareGuide-Book1.pdf
 pdftk ITKSoftwareGuide-Book2.pdf cat 2-3 5-end output /tmp/ITKSoftwareGuide-Book2.pdf

Update the HTML pages

rsync the newly generated pages to the web server.

rsync -rt html/ kitware@public:/projects/Insight/WWW/InsightWeb/ITKSoftwareGuide/html

ITK Sphinx Examples

Bump the Superbuild ITK version in Superbuild/External-ITK.cmake.

Rendered versions (epub, pdf, html) can be downloaded from the download page and rename them.

Create the source tarballs.

Set the prefix and tag:

 tag=$(git describe)

Generate .zip and .tar.gz:

 git archive --format=tar --prefix=${prefix}/ --output=${prefix}.tar ${tag}
 gzip -9  ${prefix}.tar
 git archive --format=zip -9 --prefix=${prefix}/ --output=${prefix}.zip ${tag}

ITK Wiki Examples

Download the latest examples:

 wget -O 
 mv ITKWikiExamples-master InsightWikiExamples-${version}
 zip -r InsightWikiExamples-${version}.zip InsightWikiExamples-${version}
 tar cvf InsightWikiExamples-${version}.tar InsightWikiExamples-${version}
 gzip -9 InsightWikiExamples-${version}.tar

Generating Doxygen Documentation

Note: links to the nightly generated Doxygen can be found in the footer of the Doxygen HTML pages. Use the files to upload and create InsightDoxygenDocTag-4.11.0.gz, InsightDoxygenXml-4.11.0.tar.gz, InsightDoxygenDocHtml-4.11.0.tar.gz.s

Prior to the release, new Remote Modules should be enabled in the Doxygen build's configuration.

  • Run CMake in the binary build and enable BUILD_DOXYGEN
  • Do Configure and Generate in CMake
  • Go to the binary directory
  • Type "make Documentation"
  • Move into the directory Utilities/ ( cd Utilities/ )
  • Rename the Doxygen directory as DoxygenInsightToolkit-3.4.0 (of course with the appropriate release number)
  • Tar it with the command: tar -cf DoxygenInsightToolkit-3.4.0.tar DoxygenInsightToolkit-3.4.0
  • Compress it with the command: gzip -9 DoxygenInsightToolkit-3.4.0.tar

Historical note: Before ITK 3.8, The documentation used to be generated in a directory called Documentation/Doxygen.

  • In Public do:
    • Copy documentation to: /projects/Insight/Doxygen
      • Create a subdirectory Insight34-doxygen/Documentation/Doxygen
      • The final directory will look like: /projects/Insight/Doxygen/Insight34-doxygen/Documentation/Doxygen
      • and at that level copy the "html" directory and the InsightToolkit.tag file.
    • Create symbolic link at: /projects/Insight/WWW/InsightWeb
    • (DEPRECATED - last release 4.1) Create symbolic link at: /projects/Insight/WWW/InsightDocuments/Web

Copy the files to the FTP directory in

 scp   InsightData-4.12.0.tar.gz                  kitware@public:/projects/Insight/WWW/InsightWeb/files/v4.12
 scp   InsightData-4.12.0.tar.xz                  kitware@public:/projects/Insight/WWW/InsightWeb/files/v4.12
 scp                     kitware@public:/projects/Insight/WWW/InsightWeb/files/v4.12
 scp   InsightToolkit-4.12.0.tar.gz               kitware@public:/projects/Insight/WWW/InsightWeb/files/v4.12
 scp   InsightToolkit-4.12.0.tar.xz               kitware@public:/projects/Insight/WWW/InsightWeb/files/v4.12
 scp                  kitware@public:/projects/Insight/WWW/InsightWeb/files/v4.12
 scp   InsightApplications-4.12.0.tar.gz          kitware@public:/projects/Insight/WWW/InsightWeb/files/v4.12
 scp             kitware@public:/projects/Insight/WWW/InsightWeb/files/v4.12
 scp   InsightDoxygenDocHtml-4.12.0.tar.gz        kitware@public:/projects/Insight/WWW/InsightWeb/files/v4.12
 scp   InsightDoxygenDocTag-4.12.0.tar.gz         kitware@public:/projects/Insight/WWW/InsightWeb/files/v4.12
 scp   InsightDoxygenDocXml-4.12.0.tar.gz         kitware@public:/projects/Insight/WWW/InsightWeb/files/v4.12
 scp   ItkSoftwareGuide.pdf                       kitware@public:/projects/Insight/WWW/InsightWeb/files/v4.12
 scp   InsightSoftwareGuide-Book1-4.12.0.pdf      kitware@public:/projects/Insight/WWW/InsightWeb/files/v4.12
 scp   InsightSoftwareGuide-Book2-4.12.0.pdf      kitware@public:/projects/Insight/WWW/InsightWeb/files/v4.12
 scp   InsightSoftwareGuideHtml-4.12.0.tar.gz     kitware@public:/projects/Insight/WWW/InsightWeb/files/v4.12
 scp   InsightWikiExamples-4.12.0.tar.gz          kitware@public:/projects/Insight/WWW/InsightWeb/files/v4.12
 scp             kitware@public:/projects/Insight/WWW/InsightWeb/files/v4.12
 ssh kitware@public
 cd /projects/Insight/WWW/InsightWeb
 rm ItkSoftwareGuide.pdf
 ln -s files/v4.12/ItkSoftwareGuide.pdf ItkSoftwareGuide.pdf

Copy the files to SourceForge

This is to be done only by

  • Ken Martin at Kitware
  • Brad King at Kitware
  • Matt McCormick at Kitware
  • Francois Budin at Kitware
  • Brad Lowekamp at NLM

Using The New (2010) Interface

Go to this page

and provide user name and password


  • Use the "Add Folder" button to create a folder for the release.
  • Click on the folder to open it
  • Use the "Add File" button to upload files. The interface allows you to select multiple files for simultaneous upload.

After uploading, make sure to check the hashes on the uploads. These can be shown with the "(i)" button next to the file.

Large files, like the Doxygen HTML tarball, need to be uploaded with scp, a la:

 scp InsightDoxygenDocHtml-4.7.0.tar.gz

Update the HTML Download page

Contact Communications at Kitware in order to

Update the HTML Documentation page


Contact Communications at Kitware in order to update the page:

The content should be updated to point to the Doxygen documentation of the current release

Update the Release Notes in the Wiki

Add entry for next planned release

Delete the old entry and add a new entry in the scheduled releases page

Update the Releases page

Add the "What's New" and "What's Changed" entries to the Releases page.

Update "What's New in Release x.x" Wiki Page

Update this web-page with the e-mail sent to the ITK mailing indicating the notable changes and other important information about the release.

Update "What has Changed since previous release"

From a Linux system, cd into an ITK Git directory and run

 git shortlog --topo-order --no-merges v4.0.0..v4.1.0

Delete the KWRobot time stamp commits.

Update Insight Journal (deprecated)

Contact Zack and request to do the following:

  • Install new ITK version in the Insight Journal testing environment
  • Update IJMacros.txt: Add the just released version of ITK

Update JIRA issue tracker

  • Create a new version to make possible for users to report bug pertaining to that specific ITK release
    • Create the next release target milestone with Administration -> ITK -> Versions -> Add
    • Release the current release milestone with Agile -> Classic ... -> Right click the release on the left -> Release

Further Testing

The purpose of this testing is to replicate the experience that a user may have when trying the new release.

This means that a number of ITK developers should download the tarballs or do Git checkouts with the release tag, and build the toolkit in as many configuration as possible.


  • ITK minor releases (patch) do not have a tagged release candidate.

ITK: [Welcome | Site Map]