[vtkusers] VTK 6.0 with Visual Studio

Thu Jul 25 14:08:55 EDT 2013

If you use cmake to configure the example, does it work?

On Thu, Jul 25, 2013 at 2:02 PM, Joseph Melnyk <JMelnyk at pile.com> wrote:

>  OK.  I tried this and it’s now giving the expected behavior of returning
> a NULL object from the New() call for vtkPolyDataMapper.  The
> vtkSphereSource allocation and use works fine, however.  This occurs both
> with and without the AUTOINIT lines.****
>
> ** **
>
> Previously, I was using a chart/plotting example from the wiki found here:
> http://www.vtk.org/Wiki/VTK/Examples/Cxx/Plotting/LinePlot.  There, the
> usage of vtkTable and vtkFloatArray worked fine but it would then give me
> the previously described access violation exception when I tried to create
> vtkContextView.****
>
> ** **
>
> I’m not doing this with CMake, by the way; this is all within VS2008, with
> VTK6 referenced and linked the way I’ve always used VTK5.x****
>
> ** **
>
> Joseph****
>
> ** **
>
> ** **
>
> ** **
>
> ** **
>
> *From:* Bill Lorensen [mailto:bill.lorensen at gmail.com]
> *Sent:* Thursday, July 25, 2013 1:19 PM
>
> *To:* Joseph Melnyk
> *Cc:* Frédéric Speisser; vtkusers at vtk.org
> *Subject:* Re: [vtkusers] VTK 6.0 with Visual Studio****
>
>  ** **
>
> Could you try one of the wiki examples?
>
> http://vtk.org/Wiki/VTK/Examples/Cxx/GeometricObjects/Sphere****
>
> Follow the download instructions on the page.****
>
> ** **
>
> On Thu, Jul 25, 2013 at 10:32 AM, Joseph Melnyk <JMelnyk at pile.com> wrote:*
> ***
>
> Bill****
>
> I have a small example that compiles and exhibits the same behavior.  I
> set it up as a VS2008 project, however even after being compressed it’s
> still 5MB.  Obviously I don’t want to flood inboxes with this.  Would you
> like me to send it to you directly or possibly just post the code from it
> and leave the project setup details aside?****
>
>  ****
>
> Thanks****
>
> Joseph****
>
>  ****
>
>  ****
>
>  ****
>
>  ****
>
> *From:* Bill Lorensen [mailto:bill.lorensen at gmail.com]
> *Sent:* Tuesday, July 23, 2013 11:29 AM
> *To:* Joseph Melnyk
> *Cc:* Frédéric Speisser; vtkusers at vtk.org****
>
>
> *Subject:* Re: [vtkusers] VTK 6.0 with Visual Studio****
>
>  ****
>
> 1) Can you provide a small, compilable example that fails?****
>
> 2) You could try some of the VTK Wiki Examples.
> http://www.vtk.org/Wiki/VTK/Examples
> 3) Find one that uses a class that is failing.****
>
>     for example, in google search:****
>
> site:vtk.org/Wiki/VTK/Examples vtkImageViewer2****
>
>   ****
>
> On Tue, Jul 23, 2013 at 11:24 AM, Bill Lorensen <bill.lorensen at gmail.com>
> wrote:****
>
> Have you run one of the failing programs in the VS debugger?****
>
>  ****
>
> On Tue, Jul 23, 2013 at 11:10 AM, Joseph Melnyk <JMelnyk at pile.com> wrote:*
> ***
>
> Thanks for your suggestion.  This is the definition I tried when I
> mentioned definition of VTK AUTOINIT.  The links you mentioned, and the
> ones I did, all discuss this within the context of the New() function
> returning a NULL value, however, not generating an exception.  As I said, I
> tried them anyway with no success.****
>
> Joseph Melnyk****
>
>  ****
>
> *From:* Frédéric Speisser [mailto:speisser at kappaeng.com]
> *Sent:* Tuesday, July 23, 2013 9:56 AM
> *To:* Joseph Melnyk
> *Cc:* vtkusers at vtk.org
> *Subject:* Re: [vtkusers] VTK 6.0 with Visual Studio****
>
>  ****
>
> Hello,
>
> When I ported VTK 5.9.1 to VTK 5.6, I encountered such issues maybe you
> are encountering the same, ensure you've done following :****
>
> o   extra definitions must be added in preprocessor settings : ****
>
> To have the os/rendering system  dependent classes created,  following
> macro must be set :
> *#define vtkRenderingCore_AUTOINIT
> 4(vtkInteractionStyle,vtkRenderingFreeType,vtkRenderingFreeTypeOpenGL,vtkRenderingOpenGL)
> *
>
> or a reference to a file, containing the previous macro, like this must be
> added in preprocessor definitions :
> *
> vtkRenderingCore_INCLUDE="vtkRenderingCore_AUTOINIT_vtkInteractionStyle_vtkRenderingFreeType_vtkRenderingFreeTypeOpenGL_vtkRenderingOpenGL.h"
> *****
>
>
> Hope that helps !
>
> P.S. Links which were useful to me :
>
> http://www.vtk.org/Wiki/VTK/VTK_6_Migration_Guide
> http://www.visitusers.org/index.php?title=VTK_6.0_Upgrade
>
>
> Le 23/07/2013 15:14, Robert Maynard a écrit :****
>
> Are you able to provide more information on the exact violation****
>
> exceptions with a back trace? Access violations can occur when you****
>
> call methods on a NULL object, so it could be a case that a object****
>
> factory that is NULL is being asked to create classes.****
>
>  ****
>
> On Mon, Jul 22, 2013 at 2:45 PM, Joseph Melnyk <JMelnyk at pile.com> <JMelnyk at pile.com> wrote:****
>
>  I'm attempting to port an existing code base from VTK 5.10 to 6.0.  This code base has existed and worked happily with VTK 5.x for a few years now, being built with Visual Studio 2008.  When I began the port to 6.0, I followed the migration guide found here: http://www.vtk.org/Wiki/VTK/VTK_6_Migration_Guide and the code builds and links just fine.  However, when I run it, I'm getting access violation exceptions (attempts to read/write protected memory) when I try instantiating with New().  Researching further, I see that this problem is mentioned here: http://www.vtk.org/Wiki/VTK/VTK_6_Migration/Factories_now_require_defines  HOWEVER I'm not getting NULL objects with the New() call, I'm getting exceptions.  Furthermore, it doesn't happen with ever****
>
>  y VTK o****
>
> bject; some instantiate and can be used just fine.  Nonetheless, I tried the suggestions at the second link, regarding definition of VTK AUTOINIT, and they proved fruitless.  So I'm currently at a loss...****
>
>  ****
>
> For what it's worth, I'm building VTK with CMAKE and the only options I'm changing from the default configuration are the following:****
>
> - build shared libs****
>
> - don't build TESTING****
>
> - set custom install directory****
>
>  ****
>
> Thanks for your time; any help would be greatly appreciated...****
>
> Joseph Melnyk****
>
>  ****
>
> __Scanned by MessageLabs****
>
> _______________________________________________****
>
> Powered by www.kitware.com****
>
>  ****
>
> Visit other Kitware open-source projects at http://www.kitware.com/opensource/opensource.html****
>
>  ****
>
> Please keep messages on-topic and check the VTK FAQ at: http://www.vtk.org/Wiki/VTK_FAQ****
>
>  ****
>
> Follow this link to subscribe/unsubscribe:****
>
> http://www.vtk.org/mailman/listinfo/vtkusers****
>
>  _______________________________________________****
>
> Powered by www.kitware.com****
>
>  ****
>
> Visit other Kitware open-source projects at http://www.kitware.com/opensource/opensource.html****
>
>  ****
>
> Please keep messages on-topic and check the VTK FAQ at: http://www.vtk.org/Wiki/VTK_FAQ****
>
>  ****
>
> Follow this link to subscribe/unsubscribe:****
>
> http://www.vtk.org/mailman/listinfo/vtkusers****
>
> .****
>
>  ****
>
>
>
> _Scanned by MessageLabs****
>
>
> __Scanned by MessageLabs****
>
>
> _______________________________________________
> Powered by www.kitware.com
>
> Visit other Kitware open-source projects at
> http://www.kitware.com/opensource/opensource.html
>
> Please keep messages on-topic and check the VTK FAQ at:
> http://www.vtk.org/Wiki/VTK_FAQ
>
> Follow this link to subscribe/unsubscribe:
> http://www.vtk.org/mailman/listinfo/vtkusers****
>
>
>
> ****
>
> --
> Unpaid intern in BillsBasement at noware dot com****
>
>
>
>
> --
> Unpaid intern in BillsBasement at noware dot com****
>
>
> _Scanned by MessageLabs****
>
>
> __Scanned by MessageLabs****
>
>
>
>
> --
> Unpaid intern in BillsBasement at noware dot com****
>
>
> _Scanned by MessageLabs****
>
> __Scanned by MessageLabs
>

-- 
Unpaid intern in BillsBasement at noware dot com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.vtk.org/pipermail/vtkusers/attachments/20130725/2730ad57/attachment.htm>