[vtkusers] New

Altamash Abbasi altamashabbasi at gmail.com
Wed Aug 14 10:21:24 EDT 2013 

yeah i did all things like u said  . . . now make is running and it's 65%
completed . . . I'll let u know the results . . . because u r familiar with
my problem . . . by the way thanks for helping me . . .


On Wed, Aug 14, 2013 at 4:17 PM, Anka Kochanowska <pluszcz at gmail.com> wrote:

> just run cmake indicating path to vtk 6 source directory
> Anka
>
>
>
> On Wed, Aug 14, 2013 at 9:55 AM, Altamash Abbasi <altamashabbasi at gmail.com
> > wrote:
>
>> cmake path_to_source              I DIDNT GET THIS THING . . .
>>
>>
>> On Wed, Aug 14, 2013 at 3:50 PM, Anka Kochanowska <pluszcz at gmail.com>wrote:
>>
>>> in the build directory:
>>>
>>> make
>>> make install
>>>
>>> Your build directory may be corrupted now, I would start   from scratch
>>> - remove everything from build directory
>>> - srtill in build directory:
>>> cmake path_to_source
>>> make
>>> make install
>>>
>>> Anka
>>>
>>>
>>>
>>> On Wed, Aug 14, 2013 at 9:46 AM, Altamash Abbasi <
>>> altamashabbasi at gmail.com> wrote:
>>>
>>>> i've given the same path as u gave me . . . i pressed "g" and its
>>>> complete now . . . But vtk6_installed directory is empty . . . now what i
>>>> do??
>>>>
>>>>
>>>> On Wed, Aug 14, 2013 at 3:44 PM, Anka Kochanowska <pluszcz at gmail.com>wrote:
>>>>
>>>>> Why not use the one I proposed:
>>>>> /home/stame1/software/VTK6_installed
>>>>>  Anka
>>>>>
>>>>>
>>>>>
>>>>> On Wed, Aug 14, 2013 at 9:40 AM, Altamash Abbasi <
>>>>> altamashabbasi at gmail.com> wrote:
>>>>>
>>>>>> to which path ?? like i've vtk6 in software directory . .. i create a
>>>>>> new director in software directory to build . . .
>>>>>>
>>>>>> /home/stame1/software in this directory i'm doing all things . . .
>>>>>>
>>>>>>
>>>>>> On Wed, Aug 14, 2013 at 3:37 PM, Anka Kochanowska <pluszcz at gmail.com>wrote:
>>>>>>
>>>>>>> You do not have to create it, just set CMAKE_INSTALL_PREFIX to the
>>>>>>> new path.
>>>>>>> Do not  build and install in the same directory. As a matter of
>>>>>>> fact, avoiding building in the source directory also.
>>>>>>> Anka
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> On Wed, Aug 14, 2013 at 9:34 AM, Altamash Abbasi <
>>>>>>> altamashabbasi at gmail.com> wrote:
>>>>>>>
>>>>>>>> while building i gave the same path  to CMAKE_INSTALL_PREFIX i.e
>>>>>>>> where i build the files . . . should i create a new directory in software
>>>>>>>> folder and give that path to CMAKE_INSTALL_PREFIX ????. . .
>>>>>>>>
>>>>>>>>
>>>>>>>> On Wed, Aug 14, 2013 at 3:28 PM, Anka Kochanowska <
>>>>>>>> pluszcz at gmail.com> wrote:
>>>>>>>>
>>>>>>>>> The path should be something like that:
>>>>>>>>> /opt/vtk-6.0/lib/cmake/vtk-6.0
>>>>>>>>> There is no CMakeFiles directory in the installed directory,
>>>>>>>>> either you did not install or you installed in the wrong directory.
>>>>>>>>> Please give us the absolute path to your build directory   and the
>>>>>>>>> absolute path to your install directory.
>>>>>>>>>
>>>>>>>>> When you configured cmake to build vtk, what did you set as
>>>>>>>>> CMAKE_INSTALL_PREFIX?
>>>>>>>>> If you never set this variable, the default should be /usr/local
>>>>>>>>> and probably you have no permission to install there.
>>>>>>>>>
>>>>>>>>> Maybe try to run cmake again and set CMAKE_INSTALL_PREFIX to  /home/stame1/software/VTK6_installed
>>>>>>>>> (or something other instead of VTK6_installed), then set VTK_DIR to the new
>>>>>>>>> path.
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> Anka
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> On Wed, Aug 14, 2013 at 9:16 AM, Altamash Abbasi <
>>>>>>>>> altamashabbasi at gmail.com> wrote:
>>>>>>>>>
>>>>>>>>>> there is no VTKConfig.cmake in lib/cmake/vtk6 but there is a
>>>>>>>>>> file in CMakeFiles directory . . . its path is
>>>>>>>>>> /home/stame1/software/VTKBin/CMakeFiles . . .
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> On Wed, Aug 14, 2013 at 3:11 PM, Anka Kochanowska <
>>>>>>>>>> pluszcz at gmail.com> wrote:
>>>>>>>>>>
>>>>>>>>>>> is there VTKConfig.cmake in lib/cmake/vtk6.0.0?
>>>>>>>>>>>
>>>>>>>>>>> (As I said, I do not use vtk 6, so I do not know well the
>>>>>>>>>>> directory structure)
>>>>>>>>>>>  Anka
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> On Wed, Aug 14, 2013 at 9:09 AM, Altamash Abbasi <
>>>>>>>>>>> altamashabbasi at gmail.com> wrote:
>>>>>>>>>>>
>>>>>>>>>>>> /home/stame1/software/VTKBin . . . this is the installed vtk 6
>>>>>>>>>>>> path . .. and there is also lib/cmake/vtk6.0.0 directory in it . . .
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> On Wed, Aug 14, 2013 at 3:05 PM, Anka Kochanowska <
>>>>>>>>>>>> pluszcz at gmail.com> wrote:
>>>>>>>>>>>>
>>>>>>>>>>>>> What is the installed vtk 6 path? Is there lib/vtk-6..
>>>>>>>>>>>>> directory in it?
>>>>>>>>>>>>> If not, the installation may not be good.
>>>>>>>>>>>>> Anka
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> On Wed, Aug 14, 2013 at 9:02 AM, Altamash Abbasi <
>>>>>>>>>>>>> altamashabbasi at gmail.com> wrote:
>>>>>>>>>>>>>
>>>>>>>>>>>>>> using "make" and "make install" command ??? i've also done
>>>>>>>>>>>>>> this but still it' jam . . .
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> On Wed, Aug 14, 2013 at 3:00 PM, Anka Kochanowska <
>>>>>>>>>>>>>> pluszcz at gmail.com> wrote:
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> After compiling vtk, install it, then build your examples
>>>>>>>>>>>>>>> using the path to installation directory
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Anka
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> On Wed, Aug 14, 2013 at 8:57 AM, Altamash Abbasi <
>>>>>>>>>>>>>>> altamashabbasi at gmail.com> wrote:
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> so guys whats the solution of my problem . . . Atleast tell
>>>>>>>>>>>>>>>> me what to do . . .
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> On Wed, Aug 14, 2013 at 2:46 PM, Altamash Abbasi <
>>>>>>>>>>>>>>>> altamashabbasi at gmail.com> wrote:
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> I've not installed i've just compiled using this command
>>>>>>>>>>>>>>>>> acctually i'm using LINUX...
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> ccmake ../VTKBin
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> On Wed, Aug 14, 2013 at 2:44 PM, Bill Lorensen <
>>>>>>>>>>>>>>>>> bill.lorensen at gmail.com> wrote:
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> Who installed the vtk you are using?
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> On Wed, Aug 14, 2013 at 8:44 AM, Altamash Abbasi <
>>>>>>>>>>>>>>>>>> altamashabbasi at gmail.com> wrote:
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> no VTKConfig.cmake is not in that directory . . .
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> On Wed, Aug 14, 2013 at 2:42 PM, Altamash Abbasi <
>>>>>>>>>>>>>>>>>>> altamashabbasi at gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> No bill it's not working . . . Sorry
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> On Wed, Aug 14, 2013 at 2:42 PM, Bill Lorensen <
>>>>>>>>>>>>>>>>>>>> bill.lorensen at gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> Does "Yeah Bill" mean it worked?
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> On Wed, Aug 14, 2013 at 8:40 AM, Altamash Abbasi <
>>>>>>>>>>>>>>>>>>>>> altamashabbasi at gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>> Yeah BILL
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>> On Wed, Aug 14, 2013 at 2:40 PM, Altamash Abbasi <
>>>>>>>>>>>>>>>>>>>>>> altamashabbasi at gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>> Yeah Anka I ve
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>> On Wed, Aug 14, 2013 at 2:39 PM, Altamash Abbasi <
>>>>>>>>>>>>>>>>>>>>>>> altamashabbasi at gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>> /home/stame1/software/ in this path VTK 6 is
>>>>>>>>>>>>>>>>>>>>>>>> installed and /home/stame1/software/VTKBin config file is saved . . .
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>> On Wed, Aug 14, 2013 at 2:36 PM, Anka Kochanowska <
>>>>>>>>>>>>>>>>>>>>>>>> pluszcz at gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>> Absolute path is something in the form
>>>>>>>>>>>>>>>>>>>>>>>>> /home/users/c/computerhope/public_html/cgi-bin
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>> you have to find the path to the directory where
>>>>>>>>>>>>>>>>>>>>>>>>> your vtk 6 is installed.
>>>>>>>>>>>>>>>>>>>>>>>>> Anka
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>> On Wed, Aug 14, 2013 at 8:33 AM, Altamash Abbasi <
>>>>>>>>>>>>>>>>>>>>>>>>> altamashabbasi at gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>> it' name is Software
>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>> On Wed, Aug 14, 2013 at 2:33 PM, Anka Kochanowska
>>>>>>>>>>>>>>>>>>>>>>>>>> <pluszcz at gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>> What is the absolute directory path where you
>>>>>>>>>>>>>>>>>>>>>>>>>>> installed vtk 6?
>>>>>>>>>>>>>>>>>>>>>>>>>>> Anka
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>> On Wed, Aug 14, 2013 at 8:29 AM, Altamash Abbasi
>>>>>>>>>>>>>>>>>>>>>>>>>>> <altamashabbasi at gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>> it's name is VTKBin . . .
>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Wed, Aug 14, 2013 at 2:27 PM, Bill Lorensen
>>>>>>>>>>>>>>>>>>>>>>>>>>>> <bill.lorensen at gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> What is the name of the directory that
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> contains VTKConfig.cmake?
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> When you configure using cmake, set the
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> VTK_DIR cmake cache entry to the directory
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>    containing VTKConfig.cmake.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Wed, Aug 14, 2013 at 8:17 AM, Altamash
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Abbasi <altamashabbasi at gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> here is my vtkConfig.cmake file . . . . what
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> should i do with it . . . that will help me in running the problem
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> #-----------------------------------------------------------------------------
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> #
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> # VTKConfig.cmake - VTK CMake configuration
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> file for external projects.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> #
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> # This file is configured by VTK and used by
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> the UseVTK.cmake module
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> # to load VTK's settings for an external
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> project.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> set(VTK_MODULES_DIR
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> "/home/stame1/software/VTKBin/lib/cmake/vtk-6.0/Modules")
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> # The C and C++ flags added by VTK to the
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> cmake-configured flags.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> SET(VTK_REQUIRED_C_FLAGS "")
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> SET(VTK_REQUIRED_CXX_FLAGS " -Wno-deprecated")
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> SET(VTK_REQUIRED_EXE_LINKER_FLAGS "")
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> SET(VTK_REQUIRED_SHARED_LINKER_FLAGS "")
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> SET(VTK_REQUIRED_MODULE_LINKER_FLAGS "")
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> # The VTK version number
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> SET(VTK_MAJOR_VERSION "6")
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> SET(VTK_MINOR_VERSION "0")
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> SET(VTK_BUILD_VERSION "0")
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> # The location of the UseVTK.cmake file.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> SET(VTK_CMAKE_DIR
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> "/home/stame1/software/VTK6.0.0/CMake")
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> SET(VTK_USE_FILE
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> "${VTK_CMAKE_DIR}/UseVTK.cmake")
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> #-----------------------------------------------------------------------------
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> # Load requested modules.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> # List of available VTK modules.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> set(VTK_MODULES_ENABLED)
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> # Determine list of available VTK-modules by
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> scanning the VTK_MODULES_DIR.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> file(GLOB config_files RELATIVE
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> "${VTK_MODULES_DIR}" "${VTK_MODULES_DIR}/*.cmake")
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> foreach (_file ${config_files})
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>   if (NOT "${_file}" MATCHES
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> "[^\\-]+-[a-zA-Z]+\\.cmake")
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>     string(REGEX REPLACE "\\.cmake$" ""
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> _module "${_file}")
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>     list(APPEND VTK_MODULES_ENABLED
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> "${_module}")
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>   endif()
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> endforeach()
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> # Import VTK targets.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> set(VTK_CONFIG_TARGETS_FILE
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> "/home/stame1/software/VTKBin/VTKTargets.cmake")
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> if(NOT TARGET vtkCommonCore)
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>   include("${VTK_CONFIG_TARGETS_FILE}")
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> endif()
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> # Load module interface macros.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> include("/home/stame1/software/VTK6.0.0/CMake/vtkModuleAPI.cmake")
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> # Compute set of requested modules.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> if(VTK_FIND_COMPONENTS)
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>   # Specific modules requested by
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> find_package(VTK).
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>   set(VTK_MODULES_REQUESTED
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> "${VTK_FIND_COMPONENTS}")
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> elseif(NOT "${CMAKE_VERSION}" VERSION_GREATER
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 2.8.4.20110407)
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>   # CMake 2.8.4 and lower do not forward the
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> components list through
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>   # their FindVTK.cmake module, so unless the
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> application called
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>   #
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>   #   find_package(VTK NO_MODULE ...)
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>   #
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>   # then only the per-component variables
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> VTK_FIND_REQUIRED_<mod> will
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>   # have leaked through.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>   set(VTK_MODULES_REQUESTED "")
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>   get_cmake_property(_vars VARIABLES)
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>   foreach(v IN LISTS _vars)
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>     if("x${v}" MATCHES "^xVTK_FIND_REQUIRED_"
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> AND ${v})
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>       string(REGEX REPLACE
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> "^VTK_FIND_REQUIRED_" "" _mod "${v}")
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>       list(APPEND VTK_MODULES_REQUESTED
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ${_mod})
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>     endif()
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>   endforeach()
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> endif()
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> if(NOT VTK_MODULES_REQUESTED)
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>   # No specific modules requested.  Use all
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> of them.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>   set(VTK_MODULES_REQUESTED
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> "${VTK_MODULES_ENABLED}")
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> endif()
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> # Load requested modules and their
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> dependencies into variables:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> #  VTK_DEFINITIONS     = Preprocessor
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> definitions
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> #  VTK_LIBRARIES       = Libraries to link
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> #  VTK_INCLUDE_DIRS    = Header file search
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> path
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> #  VTK_LIBRARY_DIRS    = Library search path
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> (for outside dependencies)
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> vtk_module_config(VTK
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ${VTK_MODULES_REQUESTED})
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> #-----------------------------------------------------------------------------
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> # VTK global configuration options.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> SET(VTK_BUILD_SHARED_LIBS "ON")
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> SET(VTK_LEGACY_REMOVE "OFF")
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> SET(VTK_LEGACY_SILENT "OFF")
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> SET(VTK_WRAP_PYTHON "OFF")
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> SET(VTK_WRAP_TCL "OFF")
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> SET(VTK_WRAP_JAVA "OFF")
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> # Do not add options or information here that
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> is specific to a
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> # particular module.  Instead set
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> <module>_EXPORT_OPTIONS and/or
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> # <module>_EXPORT_CODE_BUILD and
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> <module>_EXPORT_CODE_INSTALL
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> # at the top of the module CMakeLists.txt
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> file.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Wed, Aug 14, 2013 at 2:08 PM, Altamash
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Abbasi <altamashabbasi at gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> stame1 at itlrstud044:~/software/SimplePointsReader/build>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> make
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>  make[2]: *** No rule to make target
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> »/home/stame1/software/VTKBin/lib/libvtkfreetype-6.0.so.1«,
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>  needs of »Simple Point Reader" to create.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Closing.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> make[1]: ***
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [CMakeFiles/SimplePointsReader.dir/all] Error 2
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> make: *** [all]  Error 2
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> And whats the meaning of this Error . . .
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Wed, Aug 14, 2013 at 1:52 PM, Anka
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Kochanowska <pluszcz at gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hi!
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> We have asked you many times to keep the
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> discussion on vtkusers mailing list. You have to select Replay All when you
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> answer messages posted to the list.This way you have better chances to
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> resolve your problem.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> You have to pass as VTK_DIR the directory
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> containing VTKConfig.cmake. Surely, you are able to find files on your
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> system?
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Look  in the directory where you installed
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> vtk, in lib, vtk-6...
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Anka
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Wed, Aug 14, 2013 at 7:44 AM, Altamash
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Abbasi <altamashabbasi at gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> no i'm not using cmake-gui???
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> can u tell me the appropriate path of
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> VTK_DIR??
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Wed, Aug 14, 2013 at 1:37 PM, Anka
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Kochanowska <pluszcz at gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Exactly what it says - you have to set
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> VTK_DIR when you configure cmake.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Are you using cmake-gui?
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Find the line VTK_DIR  and enter there
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> the path described in the error message.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Anka
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Wed, Aug 14, 2013 at 7:01 AM, Altamash
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Abbasi <altamashabbasi at gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>  CMake Error at
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> /usr/share/cmake/Modules/FindVTK.cmake:135 (MESSAGE):
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>    VTK not found.  Set the VTK_DIR cmake
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> cache entry to the directory
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>    containing VTKConfig.cmake.  This is
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> either the root of the build tree, or
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>    PREFIX/lib/vtk for an installation.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>  For VTK 4.0, this is the location of
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>    UseVTK.cmake.  This is either the
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> root of the build tree or
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>    PREFIX/include/vtk for an
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> installation.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>  Call Stack (most recent call first):
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>    CMakeLists.txt:6 (find_package)
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Whats the meaning of this Error ?????
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Powered by www.kitware.com
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Visit other Kitware open-source projects
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> at
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> http://www.kitware.com/opensource/opensource.html
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Please keep messages on-topic and check
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> the VTK FAQ at:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> http://www.vtk.org/Wiki/VTK_FAQ
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Follow this link to
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> subscribe/unsubscribe:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> http://www.vtk.org/mailman/listinfo/vtkusers
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Powered by www.kitware.com
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Visit other Kitware open-source projects at
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> http://www.kitware.com/opensource/opensource.html
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Please keep messages on-topic and check the
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> VTK FAQ at: http://www.vtk.org/Wiki/VTK_FAQ
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Follow this link to subscribe/unsubscribe:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> http://www.vtk.org/mailman/listinfo/vtkusers
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Unpaid intern in BillsBasement at noware dot
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> com
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>>>>>>>> Unpaid intern in BillsBasement at noware dot com
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>>>>> Unpaid intern in BillsBasement at noware dot com
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>>
>>>>>
>>>>
>>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.vtk.org/pipermail/vtkusers/attachments/20130814/767e8c83/attachment.htm>

More information about the vtkusers mailing list