[vtkusers] New

Wed Aug 14 10:17:37 EDT 2013

just run cmake indicating path to vtk 6 source directory
Anka

On Wed, Aug 14, 2013 at 9:55 AM, Altamash Abbasi
<altamashabbasi at gmail.com>wrote:

> cmake path_to_source              I DIDNT GET THIS THING . . .
>
>
> On Wed, Aug 14, 2013 at 3:50 PM, Anka Kochanowska <pluszcz at gmail.com>wrote:
>
>> in the build directory:
>>
>> make
>> make install
>>
>> Your build directory may be corrupted now, I would start   from scratch
>> - remove everything from build directory
>> - srtill in build directory:
>> cmake path_to_source
>> make
>> make install
>>
>> Anka
>>
>>
>>
>> On Wed, Aug 14, 2013 at 9:46 AM, Altamash Abbasi <
>> altamashabbasi at gmail.com> wrote:
>>
>>> i've given the same path as u gave me . . . i pressed "g" and its
>>> complete now . . . But vtk6_installed directory is empty . . . now what i
>>> do??
>>>
>>>
>>> On Wed, Aug 14, 2013 at 3:44 PM, Anka Kochanowska <pluszcz at gmail.com>wrote:
>>>
>>>> Why not use the one I proposed:
>>>> /home/stame1/software/VTK6_installed
>>>>  Anka
>>>>
>>>>
>>>>
>>>> On Wed, Aug 14, 2013 at 9:40 AM, Altamash Abbasi <
>>>> altamashabbasi at gmail.com> wrote:
>>>>
>>>>> to which path ?? like i've vtk6 in software directory . .. i create a
>>>>> new director in software directory to build . . .
>>>>>
>>>>> /home/stame1/software in this directory i'm doing all things . . .
>>>>>
>>>>>
>>>>> On Wed, Aug 14, 2013 at 3:37 PM, Anka Kochanowska <pluszcz at gmail.com>wrote:
>>>>>
>>>>>> You do not have to create it, just set CMAKE_INSTALL_PREFIX to the
>>>>>> new path.
>>>>>> Do not  build and install in the same directory. As a matter of fact,
>>>>>> avoiding building in the source directory also.
>>>>>> Anka
>>>>>>
>>>>>>
>>>>>>
>>>>>> On Wed, Aug 14, 2013 at 9:34 AM, Altamash Abbasi <
>>>>>> altamashabbasi at gmail.com> wrote:
>>>>>>
>>>>>>> while building i gave the same path  to CMAKE_INSTALL_PREFIX i.e
>>>>>>> where i build the files . . . should i create a new directory in software
>>>>>>> folder and give that path to CMAKE_INSTALL_PREFIX ????. . .
>>>>>>>
>>>>>>>
>>>>>>> On Wed, Aug 14, 2013 at 3:28 PM, Anka Kochanowska <pluszcz at gmail.com
>>>>>>> > wrote:
>>>>>>>
>>>>>>>> The path should be something like that:
>>>>>>>> /opt/vtk-6.0/lib/cmake/vtk-6.0
>>>>>>>> There is no CMakeFiles directory in the installed directory, either
>>>>>>>> you did not install or you installed in the wrong directory.
>>>>>>>> Please give us the absolute path to your build directory   and the
>>>>>>>> absolute path to your install directory.
>>>>>>>>
>>>>>>>> When you configured cmake to build vtk, what did you set as
>>>>>>>> CMAKE_INSTALL_PREFIX?
>>>>>>>> If you never set this variable, the default should be /usr/local
>>>>>>>> and probably you have no permission to install there.
>>>>>>>>
>>>>>>>> Maybe try to run cmake again and set CMAKE_INSTALL_PREFIX to  /home/stame1/software/VTK6_installed
>>>>>>>> (or something other instead of VTK6_installed), then set VTK_DIR to the new
>>>>>>>> path.
>>>>>>>>
>>>>>>>>
>>>>>>>> Anka
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> On Wed, Aug 14, 2013 at 9:16 AM, Altamash Abbasi <
>>>>>>>> altamashabbasi at gmail.com> wrote:
>>>>>>>>
>>>>>>>>> there is no VTKConfig.cmake in lib/cmake/vtk6 but there is a file
>>>>>>>>> in CMakeFiles directory . . . its path is
>>>>>>>>> /home/stame1/software/VTKBin/CMakeFiles . . .
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> On Wed, Aug 14, 2013 at 3:11 PM, Anka Kochanowska <
>>>>>>>>> pluszcz at gmail.com> wrote:
>>>>>>>>>
>>>>>>>>>> is there VTKConfig.cmake in lib/cmake/vtk6.0.0?
>>>>>>>>>>
>>>>>>>>>> (As I said, I do not use vtk 6, so I do not know well the
>>>>>>>>>> directory structure)
>>>>>>>>>>  Anka
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> On Wed, Aug 14, 2013 at 9:09 AM, Altamash Abbasi <
>>>>>>>>>> altamashabbasi at gmail.com> wrote:
>>>>>>>>>>
>>>>>>>>>>> /home/stame1/software/VTKBin . . . this is the installed vtk 6
>>>>>>>>>>> path . .. and there is also lib/cmake/vtk6.0.0 directory in it . . .
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> On Wed, Aug 14, 2013 at 3:05 PM, Anka Kochanowska <
>>>>>>>>>>> pluszcz at gmail.com> wrote:
>>>>>>>>>>>
>>>>>>>>>>>> What is the installed vtk 6 path? Is there lib/vtk-6..
>>>>>>>>>>>> directory in it?
>>>>>>>>>>>> If not, the installation may not be good.
>>>>>>>>>>>> Anka
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> On Wed, Aug 14, 2013 at 9:02 AM, Altamash Abbasi <
>>>>>>>>>>>> altamashabbasi at gmail.com> wrote:
>>>>>>>>>>>>
>>>>>>>>>>>>> using "make" and "make install" command ??? i've also done
>>>>>>>>>>>>> this but still it' jam . . .
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> On Wed, Aug 14, 2013 at 3:00 PM, Anka Kochanowska <
>>>>>>>>>>>>> pluszcz at gmail.com> wrote:
>>>>>>>>>>>>>
>>>>>>>>>>>>>> After compiling vtk, install it, then build your examples
>>>>>>>>>>>>>> using the path to installation directory
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Anka
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> On Wed, Aug 14, 2013 at 8:57 AM, Altamash Abbasi <
>>>>>>>>>>>>>> altamashabbasi at gmail.com> wrote:
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> so guys whats the solution of my problem . . . Atleast tell
>>>>>>>>>>>>>>> me what to do . . .
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> On Wed, Aug 14, 2013 at 2:46 PM, Altamash Abbasi <
>>>>>>>>>>>>>>> altamashabbasi at gmail.com> wrote:
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> I've not installed i've just compiled using this command
>>>>>>>>>>>>>>>> acctually i'm using LINUX...
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> ccmake ../VTKBin
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> On Wed, Aug 14, 2013 at 2:44 PM, Bill Lorensen <
>>>>>>>>>>>>>>>> bill.lorensen at gmail.com> wrote:
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> Who installed the vtk you are using?
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> On Wed, Aug 14, 2013 at 8:44 AM, Altamash Abbasi <
>>>>>>>>>>>>>>>>> altamashabbasi at gmail.com> wrote:
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> no VTKConfig.cmake is not in that directory . . .
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> On Wed, Aug 14, 2013 at 2:42 PM, Altamash Abbasi <
>>>>>>>>>>>>>>>>>> altamashabbasi at gmail.com> wrote:
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> No bill it's not working . . . Sorry
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> On Wed, Aug 14, 2013 at 2:42 PM, Bill Lorensen <
>>>>>>>>>>>>>>>>>>> bill.lorensen at gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> Does "Yeah Bill" mean it worked?
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> On Wed, Aug 14, 2013 at 8:40 AM, Altamash Abbasi <
>>>>>>>>>>>>>>>>>>>> altamashabbasi at gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> Yeah BILL
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> On Wed, Aug 14, 2013 at 2:40 PM, Altamash Abbasi <
>>>>>>>>>>>>>>>>>>>>> altamashabbasi at gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>> Yeah Anka I ve
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>> On Wed, Aug 14, 2013 at 2:39 PM, Altamash Abbasi <
>>>>>>>>>>>>>>>>>>>>>> altamashabbasi at gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>> /home/stame1/software/ in this path VTK 6 is
>>>>>>>>>>>>>>>>>>>>>>> installed and /home/stame1/software/VTKBin config file is saved . . .
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>> On Wed, Aug 14, 2013 at 2:36 PM, Anka Kochanowska <
>>>>>>>>>>>>>>>>>>>>>>> pluszcz at gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>> Absolute path is something in the form
>>>>>>>>>>>>>>>>>>>>>>>> /home/users/c/computerhope/public_html/cgi-bin
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>> you have to find the path to the directory where
>>>>>>>>>>>>>>>>>>>>>>>> your vtk 6 is installed.
>>>>>>>>>>>>>>>>>>>>>>>> Anka
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>> On Wed, Aug 14, 2013 at 8:33 AM, Altamash Abbasi <
>>>>>>>>>>>>>>>>>>>>>>>> altamashabbasi at gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>> it' name is Software
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>> On Wed, Aug 14, 2013 at 2:33 PM, Anka Kochanowska
>>>>>>>>>>>>>>>>>>>>>>>>> <pluszcz at gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>> What is the absolute directory path where you
>>>>>>>>>>>>>>>>>>>>>>>>>> installed vtk 6?
>>>>>>>>>>>>>>>>>>>>>>>>>> Anka
>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>> On Wed, Aug 14, 2013 at 8:29 AM, Altamash Abbasi
>>>>>>>>>>>>>>>>>>>>>>>>>> <altamashabbasi at gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>> it's name is VTKBin . . .
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>> On Wed, Aug 14, 2013 at 2:27 PM, Bill Lorensen <
>>>>>>>>>>>>>>>>>>>>>>>>>>> bill.lorensen at gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>> What is the name of the directory that contains
>>>>>>>>>>>>>>>>>>>>>>>>>>>> VTKConfig.cmake?
>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>> When you configure using cmake, set the
>>>>>>>>>>>>>>>>>>>>>>>>>>>> VTK_DIR cmake cache entry to the directory
>>>>>>>>>>>>>>>>>>>>>>>>>>>>    containing VTKConfig.cmake.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Wed, Aug 14, 2013 at 8:17 AM, Altamash
>>>>>>>>>>>>>>>>>>>>>>>>>>>> Abbasi <altamashabbasi at gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> here is my vtkConfig.cmake file . . . . what
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> should i do with it . . . that will help me in running the problem
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> #-----------------------------------------------------------------------------
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> #
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> # VTKConfig.cmake - VTK CMake configuration
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> file for external projects.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> #
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> # This file is configured by VTK and used by
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> the UseVTK.cmake module
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> # to load VTK's settings for an external
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> project.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> set(VTK_MODULES_DIR
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> "/home/stame1/software/VTKBin/lib/cmake/vtk-6.0/Modules")
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> # The C and C++ flags added by VTK to the
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> cmake-configured flags.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> SET(VTK_REQUIRED_C_FLAGS "")
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> SET(VTK_REQUIRED_CXX_FLAGS " -Wno-deprecated")
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> SET(VTK_REQUIRED_EXE_LINKER_FLAGS "")
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> SET(VTK_REQUIRED_SHARED_LINKER_FLAGS "")
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> SET(VTK_REQUIRED_MODULE_LINKER_FLAGS "")
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> # The VTK version number
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> SET(VTK_MAJOR_VERSION "6")
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> SET(VTK_MINOR_VERSION "0")
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> SET(VTK_BUILD_VERSION "0")
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> # The location of the UseVTK.cmake file.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> SET(VTK_CMAKE_DIR
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> "/home/stame1/software/VTK6.0.0/CMake")
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> SET(VTK_USE_FILE
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> "${VTK_CMAKE_DIR}/UseVTK.cmake")
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> #-----------------------------------------------------------------------------
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> # Load requested modules.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> # List of available VTK modules.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> set(VTK_MODULES_ENABLED)
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> # Determine list of available VTK-modules by
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> scanning the VTK_MODULES_DIR.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> file(GLOB config_files RELATIVE
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> "${VTK_MODULES_DIR}" "${VTK_MODULES_DIR}/*.cmake")
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> foreach (_file ${config_files})
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>   if (NOT "${_file}" MATCHES
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> "[^\\-]+-[a-zA-Z]+\\.cmake")
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>     string(REGEX REPLACE "\\.cmake$" ""
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> _module "${_file}")
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>     list(APPEND VTK_MODULES_ENABLED
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> "${_module}")
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>   endif()
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> endforeach()
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> # Import VTK targets.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> set(VTK_CONFIG_TARGETS_FILE
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> "/home/stame1/software/VTKBin/VTKTargets.cmake")
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> if(NOT TARGET vtkCommonCore)
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>   include("${VTK_CONFIG_TARGETS_FILE}")
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> endif()
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> # Load module interface macros.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> include("/home/stame1/software/VTK6.0.0/CMake/vtkModuleAPI.cmake")
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> # Compute set of requested modules.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> if(VTK_FIND_COMPONENTS)
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>   # Specific modules requested by
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> find_package(VTK).
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>   set(VTK_MODULES_REQUESTED
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> "${VTK_FIND_COMPONENTS}")
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> elseif(NOT "${CMAKE_VERSION}" VERSION_GREATER
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 2.8.4.20110407)
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>   # CMake 2.8.4 and lower do not forward the
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> components list through
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>   # their FindVTK.cmake module, so unless the
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> application called
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>   #
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>   #   find_package(VTK NO_MODULE ...)
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>   #
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>   # then only the per-component variables
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> VTK_FIND_REQUIRED_<mod> will
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>   # have leaked through.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>   set(VTK_MODULES_REQUESTED "")
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>   get_cmake_property(_vars VARIABLES)
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>   foreach(v IN LISTS _vars)
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>     if("x${v}" MATCHES "^xVTK_FIND_REQUIRED_"
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> AND ${v})
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>       string(REGEX REPLACE
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> "^VTK_FIND_REQUIRED_" "" _mod "${v}")
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>       list(APPEND VTK_MODULES_REQUESTED
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ${_mod})
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>     endif()
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>   endforeach()
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> endif()
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> if(NOT VTK_MODULES_REQUESTED)
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>   # No specific modules requested.  Use all of
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> them.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>   set(VTK_MODULES_REQUESTED
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> "${VTK_MODULES_ENABLED}")
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> endif()
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> # Load requested modules and their
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> dependencies into variables:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> #  VTK_DEFINITIONS     = Preprocessor
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> definitions
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> #  VTK_LIBRARIES       = Libraries to link
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> #  VTK_INCLUDE_DIRS    = Header file search
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> path
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> #  VTK_LIBRARY_DIRS    = Library search path
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> (for outside dependencies)
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> vtk_module_config(VTK ${VTK_MODULES_REQUESTED})
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> #-----------------------------------------------------------------------------
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> # VTK global configuration options.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> SET(VTK_BUILD_SHARED_LIBS "ON")
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> SET(VTK_LEGACY_REMOVE "OFF")
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> SET(VTK_LEGACY_SILENT "OFF")
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> SET(VTK_WRAP_PYTHON "OFF")
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> SET(VTK_WRAP_TCL "OFF")
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> SET(VTK_WRAP_JAVA "OFF")
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> # Do not add options or information here that
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> is specific to a
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> # particular module.  Instead set
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> <module>_EXPORT_OPTIONS and/or
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> # <module>_EXPORT_CODE_BUILD and
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> <module>_EXPORT_CODE_INSTALL
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> # at the top of the module CMakeLists.txt file.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Wed, Aug 14, 2013 at 2:08 PM, Altamash
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Abbasi <altamashabbasi at gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> stame1 at itlrstud044:~/software/SimplePointsReader/build>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> make
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>  make[2]: *** No rule to make target
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> »/home/stame1/software/VTKBin/lib/libvtkfreetype-6.0.so.1«,
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>  needs of »Simple Point Reader" to create.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Closing.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> make[1]: ***
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [CMakeFiles/SimplePointsReader.dir/all] Error 2
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> make: *** [all]  Error 2
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> And whats the meaning of this Error . . .
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Wed, Aug 14, 2013 at 1:52 PM, Anka
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Kochanowska <pluszcz at gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hi!
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> We have asked you many times to keep the
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> discussion on vtkusers mailing list. You have to select Replay All when you
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> answer messages posted to the list.This way you have better chances to
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> resolve your problem.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> You have to pass as VTK_DIR the directory
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> containing VTKConfig.cmake. Surely, you are able to find files on your
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> system?
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Look  in the directory where you installed
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> vtk, in lib, vtk-6...
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Anka
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Wed, Aug 14, 2013 at 7:44 AM, Altamash
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Abbasi <altamashabbasi at gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> no i'm not using cmake-gui???
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> can u tell me the appropriate path of
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> VTK_DIR??
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Wed, Aug 14, 2013 at 1:37 PM, Anka
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Kochanowska <pluszcz at gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Exactly what it says - you have to set
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> VTK_DIR when you configure cmake.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Are you using cmake-gui?
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Find the line VTK_DIR  and enter there the
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> path described in the error message.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Anka
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Wed, Aug 14, 2013 at 7:01 AM, Altamash
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Abbasi <altamashabbasi at gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>  CMake Error at
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> /usr/share/cmake/Modules/FindVTK.cmake:135 (MESSAGE):
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>    VTK not found.  Set the VTK_DIR cmake
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> cache entry to the directory
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>    containing VTKConfig.cmake.  This is
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> either the root of the build tree, or
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>    PREFIX/lib/vtk for an installation.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>  For VTK 4.0, this is the location of
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>    UseVTK.cmake.  This is either the root
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> of the build tree or
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>    PREFIX/include/vtk for an installation.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>  Call Stack (most recent call first):
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>    CMakeLists.txt:6 (find_package)
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Whats the meaning of this Error ?????
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Powered by www.kitware.com
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Visit other Kitware open-source projects
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> at
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> http://www.kitware.com/opensource/opensource.html
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Please keep messages on-topic and check
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> the VTK FAQ at:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> http://www.vtk.org/Wiki/VTK_FAQ
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Follow this link to subscribe/unsubscribe:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> http://www.vtk.org/mailman/listinfo/vtkusers
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Powered by www.kitware.com
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Visit other Kitware open-source projects at
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> http://www.kitware.com/opensource/opensource.html
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Please keep messages on-topic and check the
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> VTK FAQ at: http://www.vtk.org/Wiki/VTK_FAQ
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Follow this link to subscribe/unsubscribe:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> http://www.vtk.org/mailman/listinfo/vtkusers
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>>>>>>>>>>>>>>> Unpaid intern in BillsBasement at noware dot com
>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>>>>>>> Unpaid intern in BillsBasement at noware dot com
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>>>> Unpaid intern in BillsBasement at noware dot com
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>>
>>>>>
>>>>
>>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.vtk.org/pipermail/vtkusers/attachments/20130814/fc85fc9e/attachment.htm>