[vtkusers] New

Anka Kochanowska pluszcz at gmail.com
Wed Aug 14 09:50:58 EDT 2013 

in the build directory:

make
make install

Your build directory may be corrupted now, I would start   from scratch
- remove everything from build directory
- srtill in build directory:
cmake path_to_source
make
make install

Anka



On Wed, Aug 14, 2013 at 9:46 AM, Altamash Abbasi
<altamashabbasi at gmail.com>wrote:

> i've given the same path as u gave me . . . i pressed "g" and its complete
> now . . . But vtk6_installed directory is empty . . . now what i do??
>
>
> On Wed, Aug 14, 2013 at 3:44 PM, Anka Kochanowska <pluszcz at gmail.com>wrote:
>
>> Why not use the one I proposed:
>> /home/stame1/software/VTK6_installed
>>  Anka
>>
>>
>>
>> On Wed, Aug 14, 2013 at 9:40 AM, Altamash Abbasi <
>> altamashabbasi at gmail.com> wrote:
>>
>>> to which path ?? like i've vtk6 in software directory . .. i create a
>>> new director in software directory to build . . .
>>>
>>> /home/stame1/software in this directory i'm doing all things . . .
>>>
>>>
>>> On Wed, Aug 14, 2013 at 3:37 PM, Anka Kochanowska <pluszcz at gmail.com>wrote:
>>>
>>>> You do not have to create it, just set CMAKE_INSTALL_PREFIX to the new
>>>> path.
>>>> Do not  build and install in the same directory. As a matter of fact,
>>>> avoiding building in the source directory also.
>>>> Anka
>>>>
>>>>
>>>>
>>>> On Wed, Aug 14, 2013 at 9:34 AM, Altamash Abbasi <
>>>> altamashabbasi at gmail.com> wrote:
>>>>
>>>>> while building i gave the same path  to CMAKE_INSTALL_PREFIX i.e where
>>>>> i build the files . . . should i create a new directory in software folder
>>>>> and give that path to CMAKE_INSTALL_PREFIX ????. . .
>>>>>
>>>>>
>>>>> On Wed, Aug 14, 2013 at 3:28 PM, Anka Kochanowska <pluszcz at gmail.com>wrote:
>>>>>
>>>>>> The path should be something like that:
>>>>>> /opt/vtk-6.0/lib/cmake/vtk-6.0
>>>>>> There is no CMakeFiles directory in the installed directory, either
>>>>>> you did not install or you installed in the wrong directory.
>>>>>> Please give us the absolute path to your build directory   and the
>>>>>> absolute path to your install directory.
>>>>>>
>>>>>> When you configured cmake to build vtk, what did you set as
>>>>>> CMAKE_INSTALL_PREFIX?
>>>>>> If you never set this variable, the default should be /usr/local and
>>>>>> probably you have no permission to install there.
>>>>>>
>>>>>> Maybe try to run cmake again and set CMAKE_INSTALL_PREFIX to  /home/stame1/software/VTK6_installed
>>>>>> (or something other instead of VTK6_installed), then set VTK_DIR to the new
>>>>>> path.
>>>>>>
>>>>>>
>>>>>> Anka
>>>>>>
>>>>>>
>>>>>>
>>>>>> On Wed, Aug 14, 2013 at 9:16 AM, Altamash Abbasi <
>>>>>> altamashabbasi at gmail.com> wrote:
>>>>>>
>>>>>>> there is no VTKConfig.cmake in lib/cmake/vtk6 but there is a file
>>>>>>> in CMakeFiles directory . . . its path is
>>>>>>> /home/stame1/software/VTKBin/CMakeFiles . . .
>>>>>>>
>>>>>>>
>>>>>>> On Wed, Aug 14, 2013 at 3:11 PM, Anka Kochanowska <pluszcz at gmail.com
>>>>>>> > wrote:
>>>>>>>
>>>>>>>> is there VTKConfig.cmake in lib/cmake/vtk6.0.0?
>>>>>>>>
>>>>>>>> (As I said, I do not use vtk 6, so I do not know well the directory
>>>>>>>> structure)
>>>>>>>>  Anka
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> On Wed, Aug 14, 2013 at 9:09 AM, Altamash Abbasi <
>>>>>>>> altamashabbasi at gmail.com> wrote:
>>>>>>>>
>>>>>>>>> /home/stame1/software/VTKBin . . . this is the installed vtk 6
>>>>>>>>> path . .. and there is also lib/cmake/vtk6.0.0 directory in it . . .
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> On Wed, Aug 14, 2013 at 3:05 PM, Anka Kochanowska <
>>>>>>>>> pluszcz at gmail.com> wrote:
>>>>>>>>>
>>>>>>>>>> What is the installed vtk 6 path? Is there lib/vtk-6.. directory
>>>>>>>>>> in it?
>>>>>>>>>> If not, the installation may not be good.
>>>>>>>>>> Anka
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> On Wed, Aug 14, 2013 at 9:02 AM, Altamash Abbasi <
>>>>>>>>>> altamashabbasi at gmail.com> wrote:
>>>>>>>>>>
>>>>>>>>>>> using "make" and "make install" command ??? i've also done this
>>>>>>>>>>> but still it' jam . . .
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> On Wed, Aug 14, 2013 at 3:00 PM, Anka Kochanowska <
>>>>>>>>>>> pluszcz at gmail.com> wrote:
>>>>>>>>>>>
>>>>>>>>>>>> After compiling vtk, install it, then build your examples using
>>>>>>>>>>>> the path to installation directory
>>>>>>>>>>>>
>>>>>>>>>>>> Anka
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> On Wed, Aug 14, 2013 at 8:57 AM, Altamash Abbasi <
>>>>>>>>>>>> altamashabbasi at gmail.com> wrote:
>>>>>>>>>>>>
>>>>>>>>>>>>> so guys whats the solution of my problem . . . Atleast tell me
>>>>>>>>>>>>> what to do . . .
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> On Wed, Aug 14, 2013 at 2:46 PM, Altamash Abbasi <
>>>>>>>>>>>>> altamashabbasi at gmail.com> wrote:
>>>>>>>>>>>>>
>>>>>>>>>>>>>> I've not installed i've just compiled using this command
>>>>>>>>>>>>>> acctually i'm using LINUX...
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> ccmake ../VTKBin
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> On Wed, Aug 14, 2013 at 2:44 PM, Bill Lorensen <
>>>>>>>>>>>>>> bill.lorensen at gmail.com> wrote:
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Who installed the vtk you are using?
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> On Wed, Aug 14, 2013 at 8:44 AM, Altamash Abbasi <
>>>>>>>>>>>>>>> altamashabbasi at gmail.com> wrote:
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> no VTKConfig.cmake is not in that directory . . .
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> On Wed, Aug 14, 2013 at 2:42 PM, Altamash Abbasi <
>>>>>>>>>>>>>>>> altamashabbasi at gmail.com> wrote:
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> No bill it's not working . . . Sorry
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> On Wed, Aug 14, 2013 at 2:42 PM, Bill Lorensen <
>>>>>>>>>>>>>>>>> bill.lorensen at gmail.com> wrote:
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> Does "Yeah Bill" mean it worked?
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> On Wed, Aug 14, 2013 at 8:40 AM, Altamash Abbasi <
>>>>>>>>>>>>>>>>>> altamashabbasi at gmail.com> wrote:
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> Yeah BILL
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> On Wed, Aug 14, 2013 at 2:40 PM, Altamash Abbasi <
>>>>>>>>>>>>>>>>>>> altamashabbasi at gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> Yeah Anka I ve
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> On Wed, Aug 14, 2013 at 2:39 PM, Altamash Abbasi <
>>>>>>>>>>>>>>>>>>>> altamashabbasi at gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> /home/stame1/software/ in this path VTK 6 is installed
>>>>>>>>>>>>>>>>>>>>> and /home/stame1/software/VTKBin config file is saved . . .
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> On Wed, Aug 14, 2013 at 2:36 PM, Anka Kochanowska <
>>>>>>>>>>>>>>>>>>>>> pluszcz at gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>> Absolute path is something in the form
>>>>>>>>>>>>>>>>>>>>>> /home/users/c/computerhope/public_html/cgi-bin
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>> you have to find the path to the directory where your
>>>>>>>>>>>>>>>>>>>>>> vtk 6 is installed.
>>>>>>>>>>>>>>>>>>>>>> Anka
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>> On Wed, Aug 14, 2013 at 8:33 AM, Altamash Abbasi <
>>>>>>>>>>>>>>>>>>>>>> altamashabbasi at gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>> it' name is Software
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>> On Wed, Aug 14, 2013 at 2:33 PM, Anka Kochanowska <
>>>>>>>>>>>>>>>>>>>>>>> pluszcz at gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>> What is the absolute directory path where you
>>>>>>>>>>>>>>>>>>>>>>>> installed vtk 6?
>>>>>>>>>>>>>>>>>>>>>>>> Anka
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>> On Wed, Aug 14, 2013 at 8:29 AM, Altamash Abbasi <
>>>>>>>>>>>>>>>>>>>>>>>> altamashabbasi at gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>> it's name is VTKBin . . .
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>> On Wed, Aug 14, 2013 at 2:27 PM, Bill Lorensen <
>>>>>>>>>>>>>>>>>>>>>>>>> bill.lorensen at gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>> What is the name of the directory that contains
>>>>>>>>>>>>>>>>>>>>>>>>>> VTKConfig.cmake?
>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>> When you configure using cmake, set the VTK_DIR
>>>>>>>>>>>>>>>>>>>>>>>>>> cmake cache entry to the directory
>>>>>>>>>>>>>>>>>>>>>>>>>>    containing VTKConfig.cmake.
>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>> On Wed, Aug 14, 2013 at 8:17 AM, Altamash Abbasi
>>>>>>>>>>>>>>>>>>>>>>>>>> <altamashabbasi at gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>> here is my vtkConfig.cmake file . . . . what
>>>>>>>>>>>>>>>>>>>>>>>>>>> should i do with it . . . that will help me in running the problem
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>> #-----------------------------------------------------------------------------
>>>>>>>>>>>>>>>>>>>>>>>>>>> #
>>>>>>>>>>>>>>>>>>>>>>>>>>> # VTKConfig.cmake - VTK CMake configuration file
>>>>>>>>>>>>>>>>>>>>>>>>>>> for external projects.
>>>>>>>>>>>>>>>>>>>>>>>>>>> #
>>>>>>>>>>>>>>>>>>>>>>>>>>> # This file is configured by VTK and used by the
>>>>>>>>>>>>>>>>>>>>>>>>>>> UseVTK.cmake module
>>>>>>>>>>>>>>>>>>>>>>>>>>> # to load VTK's settings for an external project.
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>> set(VTK_MODULES_DIR
>>>>>>>>>>>>>>>>>>>>>>>>>>> "/home/stame1/software/VTKBin/lib/cmake/vtk-6.0/Modules")
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>> # The C and C++ flags added by VTK to the
>>>>>>>>>>>>>>>>>>>>>>>>>>> cmake-configured flags.
>>>>>>>>>>>>>>>>>>>>>>>>>>> SET(VTK_REQUIRED_C_FLAGS "")
>>>>>>>>>>>>>>>>>>>>>>>>>>> SET(VTK_REQUIRED_CXX_FLAGS " -Wno-deprecated")
>>>>>>>>>>>>>>>>>>>>>>>>>>> SET(VTK_REQUIRED_EXE_LINKER_FLAGS "")
>>>>>>>>>>>>>>>>>>>>>>>>>>> SET(VTK_REQUIRED_SHARED_LINKER_FLAGS "")
>>>>>>>>>>>>>>>>>>>>>>>>>>> SET(VTK_REQUIRED_MODULE_LINKER_FLAGS "")
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>> # The VTK version number
>>>>>>>>>>>>>>>>>>>>>>>>>>> SET(VTK_MAJOR_VERSION "6")
>>>>>>>>>>>>>>>>>>>>>>>>>>> SET(VTK_MINOR_VERSION "0")
>>>>>>>>>>>>>>>>>>>>>>>>>>> SET(VTK_BUILD_VERSION "0")
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>> # The location of the UseVTK.cmake file.
>>>>>>>>>>>>>>>>>>>>>>>>>>> SET(VTK_CMAKE_DIR
>>>>>>>>>>>>>>>>>>>>>>>>>>> "/home/stame1/software/VTK6.0.0/CMake")
>>>>>>>>>>>>>>>>>>>>>>>>>>> SET(VTK_USE_FILE "${VTK_CMAKE_DIR}/UseVTK.cmake")
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>> #-----------------------------------------------------------------------------
>>>>>>>>>>>>>>>>>>>>>>>>>>> # Load requested modules.
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>> # List of available VTK modules.
>>>>>>>>>>>>>>>>>>>>>>>>>>> set(VTK_MODULES_ENABLED)
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>> # Determine list of available VTK-modules by
>>>>>>>>>>>>>>>>>>>>>>>>>>> scanning the VTK_MODULES_DIR.
>>>>>>>>>>>>>>>>>>>>>>>>>>> file(GLOB config_files RELATIVE
>>>>>>>>>>>>>>>>>>>>>>>>>>> "${VTK_MODULES_DIR}" "${VTK_MODULES_DIR}/*.cmake")
>>>>>>>>>>>>>>>>>>>>>>>>>>> foreach (_file ${config_files})
>>>>>>>>>>>>>>>>>>>>>>>>>>>   if (NOT "${_file}" MATCHES
>>>>>>>>>>>>>>>>>>>>>>>>>>> "[^\\-]+-[a-zA-Z]+\\.cmake")
>>>>>>>>>>>>>>>>>>>>>>>>>>>     string(REGEX REPLACE "\\.cmake$" "" _module
>>>>>>>>>>>>>>>>>>>>>>>>>>> "${_file}")
>>>>>>>>>>>>>>>>>>>>>>>>>>>     list(APPEND VTK_MODULES_ENABLED "${_module}")
>>>>>>>>>>>>>>>>>>>>>>>>>>>   endif()
>>>>>>>>>>>>>>>>>>>>>>>>>>> endforeach()
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>> # Import VTK targets.
>>>>>>>>>>>>>>>>>>>>>>>>>>> set(VTK_CONFIG_TARGETS_FILE
>>>>>>>>>>>>>>>>>>>>>>>>>>> "/home/stame1/software/VTKBin/VTKTargets.cmake")
>>>>>>>>>>>>>>>>>>>>>>>>>>> if(NOT TARGET vtkCommonCore)
>>>>>>>>>>>>>>>>>>>>>>>>>>>   include("${VTK_CONFIG_TARGETS_FILE}")
>>>>>>>>>>>>>>>>>>>>>>>>>>> endif()
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>> # Load module interface macros.
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>> include("/home/stame1/software/VTK6.0.0/CMake/vtkModuleAPI.cmake")
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>> # Compute set of requested modules.
>>>>>>>>>>>>>>>>>>>>>>>>>>> if(VTK_FIND_COMPONENTS)
>>>>>>>>>>>>>>>>>>>>>>>>>>>   # Specific modules requested by
>>>>>>>>>>>>>>>>>>>>>>>>>>> find_package(VTK).
>>>>>>>>>>>>>>>>>>>>>>>>>>>   set(VTK_MODULES_REQUESTED
>>>>>>>>>>>>>>>>>>>>>>>>>>> "${VTK_FIND_COMPONENTS}")
>>>>>>>>>>>>>>>>>>>>>>>>>>> elseif(NOT "${CMAKE_VERSION}" VERSION_GREATER
>>>>>>>>>>>>>>>>>>>>>>>>>>> 2.8.4.20110407)
>>>>>>>>>>>>>>>>>>>>>>>>>>>   # CMake 2.8.4 and lower do not forward the
>>>>>>>>>>>>>>>>>>>>>>>>>>> components list through
>>>>>>>>>>>>>>>>>>>>>>>>>>>   # their FindVTK.cmake module, so unless the
>>>>>>>>>>>>>>>>>>>>>>>>>>> application called
>>>>>>>>>>>>>>>>>>>>>>>>>>>   #
>>>>>>>>>>>>>>>>>>>>>>>>>>>   #   find_package(VTK NO_MODULE ...)
>>>>>>>>>>>>>>>>>>>>>>>>>>>   #
>>>>>>>>>>>>>>>>>>>>>>>>>>>   # then only the per-component variables
>>>>>>>>>>>>>>>>>>>>>>>>>>> VTK_FIND_REQUIRED_<mod> will
>>>>>>>>>>>>>>>>>>>>>>>>>>>   # have leaked through.
>>>>>>>>>>>>>>>>>>>>>>>>>>>   set(VTK_MODULES_REQUESTED "")
>>>>>>>>>>>>>>>>>>>>>>>>>>>   get_cmake_property(_vars VARIABLES)
>>>>>>>>>>>>>>>>>>>>>>>>>>>   foreach(v IN LISTS _vars)
>>>>>>>>>>>>>>>>>>>>>>>>>>>     if("x${v}" MATCHES "^xVTK_FIND_REQUIRED_"
>>>>>>>>>>>>>>>>>>>>>>>>>>> AND ${v})
>>>>>>>>>>>>>>>>>>>>>>>>>>>       string(REGEX REPLACE "^VTK_FIND_REQUIRED_"
>>>>>>>>>>>>>>>>>>>>>>>>>>> "" _mod "${v}")
>>>>>>>>>>>>>>>>>>>>>>>>>>>       list(APPEND VTK_MODULES_REQUESTED ${_mod})
>>>>>>>>>>>>>>>>>>>>>>>>>>>     endif()
>>>>>>>>>>>>>>>>>>>>>>>>>>>   endforeach()
>>>>>>>>>>>>>>>>>>>>>>>>>>> endif()
>>>>>>>>>>>>>>>>>>>>>>>>>>> if(NOT VTK_MODULES_REQUESTED)
>>>>>>>>>>>>>>>>>>>>>>>>>>>   # No specific modules requested.  Use all of
>>>>>>>>>>>>>>>>>>>>>>>>>>> them.
>>>>>>>>>>>>>>>>>>>>>>>>>>>   set(VTK_MODULES_REQUESTED
>>>>>>>>>>>>>>>>>>>>>>>>>>> "${VTK_MODULES_ENABLED}")
>>>>>>>>>>>>>>>>>>>>>>>>>>> endif()
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>> # Load requested modules and their dependencies
>>>>>>>>>>>>>>>>>>>>>>>>>>> into variables:
>>>>>>>>>>>>>>>>>>>>>>>>>>> #  VTK_DEFINITIONS     = Preprocessor definitions
>>>>>>>>>>>>>>>>>>>>>>>>>>> #  VTK_LIBRARIES       = Libraries to link
>>>>>>>>>>>>>>>>>>>>>>>>>>> #  VTK_INCLUDE_DIRS    = Header file search path
>>>>>>>>>>>>>>>>>>>>>>>>>>> #  VTK_LIBRARY_DIRS    = Library search path
>>>>>>>>>>>>>>>>>>>>>>>>>>> (for outside dependencies)
>>>>>>>>>>>>>>>>>>>>>>>>>>> vtk_module_config(VTK ${VTK_MODULES_REQUESTED})
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>> #-----------------------------------------------------------------------------
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>> # VTK global configuration options.
>>>>>>>>>>>>>>>>>>>>>>>>>>> SET(VTK_BUILD_SHARED_LIBS "ON")
>>>>>>>>>>>>>>>>>>>>>>>>>>> SET(VTK_LEGACY_REMOVE "OFF")
>>>>>>>>>>>>>>>>>>>>>>>>>>> SET(VTK_LEGACY_SILENT "OFF")
>>>>>>>>>>>>>>>>>>>>>>>>>>> SET(VTK_WRAP_PYTHON "OFF")
>>>>>>>>>>>>>>>>>>>>>>>>>>> SET(VTK_WRAP_TCL "OFF")
>>>>>>>>>>>>>>>>>>>>>>>>>>> SET(VTK_WRAP_JAVA "OFF")
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>> # Do not add options or information here that is
>>>>>>>>>>>>>>>>>>>>>>>>>>> specific to a
>>>>>>>>>>>>>>>>>>>>>>>>>>> # particular module.  Instead set
>>>>>>>>>>>>>>>>>>>>>>>>>>> <module>_EXPORT_OPTIONS and/or
>>>>>>>>>>>>>>>>>>>>>>>>>>> # <module>_EXPORT_CODE_BUILD and
>>>>>>>>>>>>>>>>>>>>>>>>>>> <module>_EXPORT_CODE_INSTALL
>>>>>>>>>>>>>>>>>>>>>>>>>>> # at the top of the module CMakeLists.txt file.
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>> On Wed, Aug 14, 2013 at 2:08 PM, Altamash Abbasi
>>>>>>>>>>>>>>>>>>>>>>>>>>> <altamashabbasi at gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>> stame1 at itlrstud044:~/software/SimplePointsReader/build>
>>>>>>>>>>>>>>>>>>>>>>>>>>>> make
>>>>>>>>>>>>>>>>>>>>>>>>>>>>  make[2]: *** No rule to make target
>>>>>>>>>>>>>>>>>>>>>>>>>>>> »/home/stame1/software/VTKBin/lib/libvtkfreetype-6.0.so.1«,
>>>>>>>>>>>>>>>>>>>>>>>>>>>>  needs of »Simple Point Reader" to create.
>>>>>>>>>>>>>>>>>>>>>>>>>>>> Closing.
>>>>>>>>>>>>>>>>>>>>>>>>>>>> make[1]: ***
>>>>>>>>>>>>>>>>>>>>>>>>>>>> [CMakeFiles/SimplePointsReader.dir/all] Error 2
>>>>>>>>>>>>>>>>>>>>>>>>>>>> make: *** [all]  Error 2
>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>> And whats the meaning of this Error . . .
>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Wed, Aug 14, 2013 at 1:52 PM, Anka
>>>>>>>>>>>>>>>>>>>>>>>>>>>> Kochanowska <pluszcz at gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hi!
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> We have asked you many times to keep the
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> discussion on vtkusers mailing list. You have to select Replay All when you
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> answer messages posted to the list.This way you have better chances to
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> resolve your problem.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> You have to pass as VTK_DIR the directory
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> containing VTKConfig.cmake. Surely, you are able to find files on your
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> system?
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Look  in the directory where you installed
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> vtk, in lib, vtk-6...
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Anka
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Wed, Aug 14, 2013 at 7:44 AM, Altamash
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Abbasi <altamashabbasi at gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> no i'm not using cmake-gui???
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> can u tell me the appropriate path of
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> VTK_DIR??
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Wed, Aug 14, 2013 at 1:37 PM, Anka
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Kochanowska <pluszcz at gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Exactly what it says - you have to set
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> VTK_DIR when you configure cmake.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Are you using cmake-gui?
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Find the line VTK_DIR  and enter there the
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> path described in the error message.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Anka
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Wed, Aug 14, 2013 at 7:01 AM, Altamash
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Abbasi <altamashabbasi at gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>  CMake Error at
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> /usr/share/cmake/Modules/FindVTK.cmake:135 (MESSAGE):
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>    VTK not found.  Set the VTK_DIR cmake
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> cache entry to the directory
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>    containing VTKConfig.cmake.  This is
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> either the root of the build tree, or
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>    PREFIX/lib/vtk for an installation.  For
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> VTK 4.0, this is the location of
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>    UseVTK.cmake.  This is either the root
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> of the build tree or
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>    PREFIX/include/vtk for an installation.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>  Call Stack (most recent call first):
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>    CMakeLists.txt:6 (find_package)
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Whats the meaning of this Error ?????
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Powered by www.kitware.com
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Visit other Kitware open-source projects at
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> http://www.kitware.com/opensource/opensource.html
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Please keep messages on-topic and check the
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> VTK FAQ at: http://www.vtk.org/Wiki/VTK_FAQ
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Follow this link to subscribe/unsubscribe:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> http://www.vtk.org/mailman/listinfo/vtkusers
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>>>>>>>>>>>>>>>> Powered by www.kitware.com
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>> Visit other Kitware open-source projects at
>>>>>>>>>>>>>>>>>>>>>>>>>>> http://www.kitware.com/opensource/opensource.html
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>> Please keep messages on-topic and check the VTK
>>>>>>>>>>>>>>>>>>>>>>>>>>> FAQ at: http://www.vtk.org/Wiki/VTK_FAQ
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>> Follow this link to subscribe/unsubscribe:
>>>>>>>>>>>>>>>>>>>>>>>>>>> http://www.vtk.org/mailman/listinfo/vtkusers
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>>>>>>>>>>>>> Unpaid intern in BillsBasement at noware dot com
>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>>>>> Unpaid intern in BillsBasement at noware dot com
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>> Unpaid intern in BillsBasement at noware dot com
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>>
>>>>>
>>>>
>>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.vtk.org/pipermail/vtkusers/attachments/20130814/e8382c79/attachment.htm>

More information about the vtkusers mailing list