[vtkusers] New

Altamash Abbasi altamashabbasi at gmail.com
Wed Aug 14 09:46:47 EDT 2013 

i've given the same path as u gave me . . . i pressed "g" and its complete
now . . . But vtk6_installed directory is empty . . . now what i do??


On Wed, Aug 14, 2013 at 3:44 PM, Anka Kochanowska <pluszcz at gmail.com> wrote:

> Why not use the one I proposed:
> /home/stame1/software/VTK6_installed
> Anka
>
>
>
> On Wed, Aug 14, 2013 at 9:40 AM, Altamash Abbasi <altamashabbasi at gmail.com
> > wrote:
>
>> to which path ?? like i've vtk6 in software directory . .. i create a new
>> director in software directory to build . . .
>>
>> /home/stame1/software in this directory i'm doing all things . . .
>>
>>
>> On Wed, Aug 14, 2013 at 3:37 PM, Anka Kochanowska <pluszcz at gmail.com>wrote:
>>
>>> You do not have to create it, just set CMAKE_INSTALL_PREFIX to the new
>>> path.
>>> Do not  build and install in the same directory. As a matter of fact,
>>> avoiding building in the source directory also.
>>> Anka
>>>
>>>
>>>
>>> On Wed, Aug 14, 2013 at 9:34 AM, Altamash Abbasi <
>>> altamashabbasi at gmail.com> wrote:
>>>
>>>> while building i gave the same path  to CMAKE_INSTALL_PREFIX i.e where
>>>> i build the files . . . should i create a new directory in software folder
>>>> and give that path to CMAKE_INSTALL_PREFIX ????. . .
>>>>
>>>>
>>>> On Wed, Aug 14, 2013 at 3:28 PM, Anka Kochanowska <pluszcz at gmail.com>wrote:
>>>>
>>>>> The path should be something like that:
>>>>> /opt/vtk-6.0/lib/cmake/vtk-6.0
>>>>> There is no CMakeFiles directory in the installed directory, either
>>>>> you did not install or you installed in the wrong directory.
>>>>> Please give us the absolute path to your build directory   and the
>>>>> absolute path to your install directory.
>>>>>
>>>>> When you configured cmake to build vtk, what did you set as
>>>>> CMAKE_INSTALL_PREFIX?
>>>>> If you never set this variable, the default should be /usr/local and
>>>>> probably you have no permission to install there.
>>>>>
>>>>> Maybe try to run cmake again and set CMAKE_INSTALL_PREFIX to  /home/stame1/software/VTK6_installed
>>>>> (or something other instead of VTK6_installed), then set VTK_DIR to the new
>>>>> path.
>>>>>
>>>>>
>>>>> Anka
>>>>>
>>>>>
>>>>>
>>>>> On Wed, Aug 14, 2013 at 9:16 AM, Altamash Abbasi <
>>>>> altamashabbasi at gmail.com> wrote:
>>>>>
>>>>>> there is no VTKConfig.cmake in lib/cmake/vtk6 but there is a file in
>>>>>> CMakeFiles directory . . . its path is
>>>>>> /home/stame1/software/VTKBin/CMakeFiles . . .
>>>>>>
>>>>>>
>>>>>> On Wed, Aug 14, 2013 at 3:11 PM, Anka Kochanowska <pluszcz at gmail.com>wrote:
>>>>>>
>>>>>>> is there VTKConfig.cmake in lib/cmake/vtk6.0.0?
>>>>>>>
>>>>>>> (As I said, I do not use vtk 6, so I do not know well the directory
>>>>>>> structure)
>>>>>>>  Anka
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> On Wed, Aug 14, 2013 at 9:09 AM, Altamash Abbasi <
>>>>>>> altamashabbasi at gmail.com> wrote:
>>>>>>>
>>>>>>>> /home/stame1/software/VTKBin . . . this is the installed vtk 6 path
>>>>>>>> . .. and there is also lib/cmake/vtk6.0.0 directory in it . . .
>>>>>>>>
>>>>>>>>
>>>>>>>> On Wed, Aug 14, 2013 at 3:05 PM, Anka Kochanowska <
>>>>>>>> pluszcz at gmail.com> wrote:
>>>>>>>>
>>>>>>>>> What is the installed vtk 6 path? Is there lib/vtk-6.. directory
>>>>>>>>> in it?
>>>>>>>>> If not, the installation may not be good.
>>>>>>>>> Anka
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> On Wed, Aug 14, 2013 at 9:02 AM, Altamash Abbasi <
>>>>>>>>> altamashabbasi at gmail.com> wrote:
>>>>>>>>>
>>>>>>>>>> using "make" and "make install" command ??? i've also done this
>>>>>>>>>> but still it' jam . . .
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> On Wed, Aug 14, 2013 at 3:00 PM, Anka Kochanowska <
>>>>>>>>>> pluszcz at gmail.com> wrote:
>>>>>>>>>>
>>>>>>>>>>> After compiling vtk, install it, then build your examples using
>>>>>>>>>>> the path to installation directory
>>>>>>>>>>>
>>>>>>>>>>> Anka
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> On Wed, Aug 14, 2013 at 8:57 AM, Altamash Abbasi <
>>>>>>>>>>> altamashabbasi at gmail.com> wrote:
>>>>>>>>>>>
>>>>>>>>>>>> so guys whats the solution of my problem . . . Atleast tell me
>>>>>>>>>>>> what to do . . .
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> On Wed, Aug 14, 2013 at 2:46 PM, Altamash Abbasi <
>>>>>>>>>>>> altamashabbasi at gmail.com> wrote:
>>>>>>>>>>>>
>>>>>>>>>>>>> I've not installed i've just compiled using this command
>>>>>>>>>>>>> acctually i'm using LINUX...
>>>>>>>>>>>>>
>>>>>>>>>>>>> ccmake ../VTKBin
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> On Wed, Aug 14, 2013 at 2:44 PM, Bill Lorensen <
>>>>>>>>>>>>> bill.lorensen at gmail.com> wrote:
>>>>>>>>>>>>>
>>>>>>>>>>>>>> Who installed the vtk you are using?
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> On Wed, Aug 14, 2013 at 8:44 AM, Altamash Abbasi <
>>>>>>>>>>>>>> altamashabbasi at gmail.com> wrote:
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> no VTKConfig.cmake is not in that directory . . .
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> On Wed, Aug 14, 2013 at 2:42 PM, Altamash Abbasi <
>>>>>>>>>>>>>>> altamashabbasi at gmail.com> wrote:
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> No bill it's not working . . . Sorry
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> On Wed, Aug 14, 2013 at 2:42 PM, Bill Lorensen <
>>>>>>>>>>>>>>>> bill.lorensen at gmail.com> wrote:
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> Does "Yeah Bill" mean it worked?
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> On Wed, Aug 14, 2013 at 8:40 AM, Altamash Abbasi <
>>>>>>>>>>>>>>>>> altamashabbasi at gmail.com> wrote:
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> Yeah BILL
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> On Wed, Aug 14, 2013 at 2:40 PM, Altamash Abbasi <
>>>>>>>>>>>>>>>>>> altamashabbasi at gmail.com> wrote:
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> Yeah Anka I ve
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> On Wed, Aug 14, 2013 at 2:39 PM, Altamash Abbasi <
>>>>>>>>>>>>>>>>>>> altamashabbasi at gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> /home/stame1/software/ in this path VTK 6 is installed
>>>>>>>>>>>>>>>>>>>> and /home/stame1/software/VTKBin config file is saved . . .
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> On Wed, Aug 14, 2013 at 2:36 PM, Anka Kochanowska <
>>>>>>>>>>>>>>>>>>>> pluszcz at gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> Absolute path is something in the form
>>>>>>>>>>>>>>>>>>>>> /home/users/c/computerhope/public_html/cgi-bin
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> you have to find the path to the directory where your
>>>>>>>>>>>>>>>>>>>>> vtk 6 is installed.
>>>>>>>>>>>>>>>>>>>>> Anka
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> On Wed, Aug 14, 2013 at 8:33 AM, Altamash Abbasi <
>>>>>>>>>>>>>>>>>>>>> altamashabbasi at gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>> it' name is Software
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>> On Wed, Aug 14, 2013 at 2:33 PM, Anka Kochanowska <
>>>>>>>>>>>>>>>>>>>>>> pluszcz at gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>> What is the absolute directory path where you
>>>>>>>>>>>>>>>>>>>>>>> installed vtk 6?
>>>>>>>>>>>>>>>>>>>>>>> Anka
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>> On Wed, Aug 14, 2013 at 8:29 AM, Altamash Abbasi <
>>>>>>>>>>>>>>>>>>>>>>> altamashabbasi at gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>> it's name is VTKBin . . .
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>> On Wed, Aug 14, 2013 at 2:27 PM, Bill Lorensen <
>>>>>>>>>>>>>>>>>>>>>>>> bill.lorensen at gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>> What is the name of the directory that contains
>>>>>>>>>>>>>>>>>>>>>>>>> VTKConfig.cmake?
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>> When you configure using cmake, set the VTK_DIR
>>>>>>>>>>>>>>>>>>>>>>>>> cmake cache entry to the directory
>>>>>>>>>>>>>>>>>>>>>>>>>    containing VTKConfig.cmake.
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>> On Wed, Aug 14, 2013 at 8:17 AM, Altamash Abbasi <
>>>>>>>>>>>>>>>>>>>>>>>>> altamashabbasi at gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>> here is my vtkConfig.cmake file . . . . what
>>>>>>>>>>>>>>>>>>>>>>>>>> should i do with it . . . that will help me in running the problem
>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>> #-----------------------------------------------------------------------------
>>>>>>>>>>>>>>>>>>>>>>>>>> #
>>>>>>>>>>>>>>>>>>>>>>>>>> # VTKConfig.cmake - VTK CMake configuration file
>>>>>>>>>>>>>>>>>>>>>>>>>> for external projects.
>>>>>>>>>>>>>>>>>>>>>>>>>> #
>>>>>>>>>>>>>>>>>>>>>>>>>> # This file is configured by VTK and used by the
>>>>>>>>>>>>>>>>>>>>>>>>>> UseVTK.cmake module
>>>>>>>>>>>>>>>>>>>>>>>>>> # to load VTK's settings for an external project.
>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>> set(VTK_MODULES_DIR
>>>>>>>>>>>>>>>>>>>>>>>>>> "/home/stame1/software/VTKBin/lib/cmake/vtk-6.0/Modules")
>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>> # The C and C++ flags added by VTK to the
>>>>>>>>>>>>>>>>>>>>>>>>>> cmake-configured flags.
>>>>>>>>>>>>>>>>>>>>>>>>>> SET(VTK_REQUIRED_C_FLAGS "")
>>>>>>>>>>>>>>>>>>>>>>>>>> SET(VTK_REQUIRED_CXX_FLAGS " -Wno-deprecated")
>>>>>>>>>>>>>>>>>>>>>>>>>> SET(VTK_REQUIRED_EXE_LINKER_FLAGS "")
>>>>>>>>>>>>>>>>>>>>>>>>>> SET(VTK_REQUIRED_SHARED_LINKER_FLAGS "")
>>>>>>>>>>>>>>>>>>>>>>>>>> SET(VTK_REQUIRED_MODULE_LINKER_FLAGS "")
>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>> # The VTK version number
>>>>>>>>>>>>>>>>>>>>>>>>>> SET(VTK_MAJOR_VERSION "6")
>>>>>>>>>>>>>>>>>>>>>>>>>> SET(VTK_MINOR_VERSION "0")
>>>>>>>>>>>>>>>>>>>>>>>>>> SET(VTK_BUILD_VERSION "0")
>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>> # The location of the UseVTK.cmake file.
>>>>>>>>>>>>>>>>>>>>>>>>>> SET(VTK_CMAKE_DIR
>>>>>>>>>>>>>>>>>>>>>>>>>> "/home/stame1/software/VTK6.0.0/CMake")
>>>>>>>>>>>>>>>>>>>>>>>>>> SET(VTK_USE_FILE "${VTK_CMAKE_DIR}/UseVTK.cmake")
>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>> #-----------------------------------------------------------------------------
>>>>>>>>>>>>>>>>>>>>>>>>>> # Load requested modules.
>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>> # List of available VTK modules.
>>>>>>>>>>>>>>>>>>>>>>>>>> set(VTK_MODULES_ENABLED)
>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>> # Determine list of available VTK-modules by
>>>>>>>>>>>>>>>>>>>>>>>>>> scanning the VTK_MODULES_DIR.
>>>>>>>>>>>>>>>>>>>>>>>>>> file(GLOB config_files RELATIVE
>>>>>>>>>>>>>>>>>>>>>>>>>> "${VTK_MODULES_DIR}" "${VTK_MODULES_DIR}/*.cmake")
>>>>>>>>>>>>>>>>>>>>>>>>>> foreach (_file ${config_files})
>>>>>>>>>>>>>>>>>>>>>>>>>>   if (NOT "${_file}" MATCHES
>>>>>>>>>>>>>>>>>>>>>>>>>> "[^\\-]+-[a-zA-Z]+\\.cmake")
>>>>>>>>>>>>>>>>>>>>>>>>>>     string(REGEX REPLACE "\\.cmake$" "" _module
>>>>>>>>>>>>>>>>>>>>>>>>>> "${_file}")
>>>>>>>>>>>>>>>>>>>>>>>>>>     list(APPEND VTK_MODULES_ENABLED "${_module}")
>>>>>>>>>>>>>>>>>>>>>>>>>>   endif()
>>>>>>>>>>>>>>>>>>>>>>>>>> endforeach()
>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>> # Import VTK targets.
>>>>>>>>>>>>>>>>>>>>>>>>>> set(VTK_CONFIG_TARGETS_FILE
>>>>>>>>>>>>>>>>>>>>>>>>>> "/home/stame1/software/VTKBin/VTKTargets.cmake")
>>>>>>>>>>>>>>>>>>>>>>>>>> if(NOT TARGET vtkCommonCore)
>>>>>>>>>>>>>>>>>>>>>>>>>>   include("${VTK_CONFIG_TARGETS_FILE}")
>>>>>>>>>>>>>>>>>>>>>>>>>> endif()
>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>> # Load module interface macros.
>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>> include("/home/stame1/software/VTK6.0.0/CMake/vtkModuleAPI.cmake")
>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>> # Compute set of requested modules.
>>>>>>>>>>>>>>>>>>>>>>>>>> if(VTK_FIND_COMPONENTS)
>>>>>>>>>>>>>>>>>>>>>>>>>>   # Specific modules requested by
>>>>>>>>>>>>>>>>>>>>>>>>>> find_package(VTK).
>>>>>>>>>>>>>>>>>>>>>>>>>>   set(VTK_MODULES_REQUESTED
>>>>>>>>>>>>>>>>>>>>>>>>>> "${VTK_FIND_COMPONENTS}")
>>>>>>>>>>>>>>>>>>>>>>>>>> elseif(NOT "${CMAKE_VERSION}" VERSION_GREATER
>>>>>>>>>>>>>>>>>>>>>>>>>> 2.8.4.20110407)
>>>>>>>>>>>>>>>>>>>>>>>>>>   # CMake 2.8.4 and lower do not forward the
>>>>>>>>>>>>>>>>>>>>>>>>>> components list through
>>>>>>>>>>>>>>>>>>>>>>>>>>   # their FindVTK.cmake module, so unless the
>>>>>>>>>>>>>>>>>>>>>>>>>> application called
>>>>>>>>>>>>>>>>>>>>>>>>>>   #
>>>>>>>>>>>>>>>>>>>>>>>>>>   #   find_package(VTK NO_MODULE ...)
>>>>>>>>>>>>>>>>>>>>>>>>>>   #
>>>>>>>>>>>>>>>>>>>>>>>>>>   # then only the per-component variables
>>>>>>>>>>>>>>>>>>>>>>>>>> VTK_FIND_REQUIRED_<mod> will
>>>>>>>>>>>>>>>>>>>>>>>>>>   # have leaked through.
>>>>>>>>>>>>>>>>>>>>>>>>>>   set(VTK_MODULES_REQUESTED "")
>>>>>>>>>>>>>>>>>>>>>>>>>>   get_cmake_property(_vars VARIABLES)
>>>>>>>>>>>>>>>>>>>>>>>>>>   foreach(v IN LISTS _vars)
>>>>>>>>>>>>>>>>>>>>>>>>>>     if("x${v}" MATCHES "^xVTK_FIND_REQUIRED_" AND
>>>>>>>>>>>>>>>>>>>>>>>>>> ${v})
>>>>>>>>>>>>>>>>>>>>>>>>>>       string(REGEX REPLACE "^VTK_FIND_REQUIRED_"
>>>>>>>>>>>>>>>>>>>>>>>>>> "" _mod "${v}")
>>>>>>>>>>>>>>>>>>>>>>>>>>       list(APPEND VTK_MODULES_REQUESTED ${_mod})
>>>>>>>>>>>>>>>>>>>>>>>>>>     endif()
>>>>>>>>>>>>>>>>>>>>>>>>>>   endforeach()
>>>>>>>>>>>>>>>>>>>>>>>>>> endif()
>>>>>>>>>>>>>>>>>>>>>>>>>> if(NOT VTK_MODULES_REQUESTED)
>>>>>>>>>>>>>>>>>>>>>>>>>>   # No specific modules requested.  Use all of
>>>>>>>>>>>>>>>>>>>>>>>>>> them.
>>>>>>>>>>>>>>>>>>>>>>>>>>   set(VTK_MODULES_REQUESTED
>>>>>>>>>>>>>>>>>>>>>>>>>> "${VTK_MODULES_ENABLED}")
>>>>>>>>>>>>>>>>>>>>>>>>>> endif()
>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>> # Load requested modules and their dependencies
>>>>>>>>>>>>>>>>>>>>>>>>>> into variables:
>>>>>>>>>>>>>>>>>>>>>>>>>> #  VTK_DEFINITIONS     = Preprocessor definitions
>>>>>>>>>>>>>>>>>>>>>>>>>> #  VTK_LIBRARIES       = Libraries to link
>>>>>>>>>>>>>>>>>>>>>>>>>> #  VTK_INCLUDE_DIRS    = Header file search path
>>>>>>>>>>>>>>>>>>>>>>>>>> #  VTK_LIBRARY_DIRS    = Library search path (for
>>>>>>>>>>>>>>>>>>>>>>>>>> outside dependencies)
>>>>>>>>>>>>>>>>>>>>>>>>>> vtk_module_config(VTK ${VTK_MODULES_REQUESTED})
>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>> #-----------------------------------------------------------------------------
>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>> # VTK global configuration options.
>>>>>>>>>>>>>>>>>>>>>>>>>> SET(VTK_BUILD_SHARED_LIBS "ON")
>>>>>>>>>>>>>>>>>>>>>>>>>> SET(VTK_LEGACY_REMOVE "OFF")
>>>>>>>>>>>>>>>>>>>>>>>>>> SET(VTK_LEGACY_SILENT "OFF")
>>>>>>>>>>>>>>>>>>>>>>>>>> SET(VTK_WRAP_PYTHON "OFF")
>>>>>>>>>>>>>>>>>>>>>>>>>> SET(VTK_WRAP_TCL "OFF")
>>>>>>>>>>>>>>>>>>>>>>>>>> SET(VTK_WRAP_JAVA "OFF")
>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>> # Do not add options or information here that is
>>>>>>>>>>>>>>>>>>>>>>>>>> specific to a
>>>>>>>>>>>>>>>>>>>>>>>>>> # particular module.  Instead set
>>>>>>>>>>>>>>>>>>>>>>>>>> <module>_EXPORT_OPTIONS and/or
>>>>>>>>>>>>>>>>>>>>>>>>>> # <module>_EXPORT_CODE_BUILD and
>>>>>>>>>>>>>>>>>>>>>>>>>> <module>_EXPORT_CODE_INSTALL
>>>>>>>>>>>>>>>>>>>>>>>>>> # at the top of the module CMakeLists.txt file.
>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>> On Wed, Aug 14, 2013 at 2:08 PM, Altamash Abbasi
>>>>>>>>>>>>>>>>>>>>>>>>>> <altamashabbasi at gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>> stame1 at itlrstud044:~/software/SimplePointsReader/build>
>>>>>>>>>>>>>>>>>>>>>>>>>>> make
>>>>>>>>>>>>>>>>>>>>>>>>>>>  make[2]: *** No rule to make target
>>>>>>>>>>>>>>>>>>>>>>>>>>> »/home/stame1/software/VTKBin/lib/libvtkfreetype-6.0.so.1«,
>>>>>>>>>>>>>>>>>>>>>>>>>>>  needs of »Simple Point Reader" to create.
>>>>>>>>>>>>>>>>>>>>>>>>>>> Closing.
>>>>>>>>>>>>>>>>>>>>>>>>>>> make[1]: ***
>>>>>>>>>>>>>>>>>>>>>>>>>>> [CMakeFiles/SimplePointsReader.dir/all] Error 2
>>>>>>>>>>>>>>>>>>>>>>>>>>> make: *** [all]  Error 2
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>> And whats the meaning of this Error . . .
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>> On Wed, Aug 14, 2013 at 1:52 PM, Anka
>>>>>>>>>>>>>>>>>>>>>>>>>>> Kochanowska <pluszcz at gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hi!
>>>>>>>>>>>>>>>>>>>>>>>>>>>> We have asked you many times to keep the
>>>>>>>>>>>>>>>>>>>>>>>>>>>> discussion on vtkusers mailing list. You have to select Replay All when you
>>>>>>>>>>>>>>>>>>>>>>>>>>>> answer messages posted to the list.This way you have better chances to
>>>>>>>>>>>>>>>>>>>>>>>>>>>> resolve your problem.
>>>>>>>>>>>>>>>>>>>>>>>>>>>> You have to pass as VTK_DIR the directory
>>>>>>>>>>>>>>>>>>>>>>>>>>>> containing VTKConfig.cmake. Surely, you are able to find files on your
>>>>>>>>>>>>>>>>>>>>>>>>>>>> system?
>>>>>>>>>>>>>>>>>>>>>>>>>>>> Look  in the directory where you installed vtk,
>>>>>>>>>>>>>>>>>>>>>>>>>>>> in lib, vtk-6...
>>>>>>>>>>>>>>>>>>>>>>>>>>>> Anka
>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Wed, Aug 14, 2013 at 7:44 AM, Altamash
>>>>>>>>>>>>>>>>>>>>>>>>>>>> Abbasi <altamashabbasi at gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> no i'm not using cmake-gui???
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> can u tell me the appropriate path of VTK_DIR??
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Wed, Aug 14, 2013 at 1:37 PM, Anka
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Kochanowska <pluszcz at gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Exactly what it says - you have to set
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> VTK_DIR when you configure cmake.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Are you using cmake-gui?
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Find the line VTK_DIR  and enter there the
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> path described in the error message.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Anka
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Wed, Aug 14, 2013 at 7:01 AM, Altamash
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Abbasi <altamashabbasi at gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>  CMake Error at
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> /usr/share/cmake/Modules/FindVTK.cmake:135 (MESSAGE):
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>    VTK not found.  Set the VTK_DIR cmake
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> cache entry to the directory
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>    containing VTKConfig.cmake.  This is
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> either the root of the build tree, or
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>    PREFIX/lib/vtk for an installation.  For
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> VTK 4.0, this is the location of
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>    UseVTK.cmake.  This is either the root of
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> the build tree or
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>    PREFIX/include/vtk for an installation.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>  Call Stack (most recent call first):
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>    CMakeLists.txt:6 (find_package)
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Whats the meaning of this Error ?????
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Powered by www.kitware.com
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Visit other Kitware open-source projects at
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> http://www.kitware.com/opensource/opensource.html
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Please keep messages on-topic and check the
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> VTK FAQ at: http://www.vtk.org/Wiki/VTK_FAQ
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Follow this link to subscribe/unsubscribe:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> http://www.vtk.org/mailman/listinfo/vtkusers
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>>>>>>>>>>>>>>> Powered by www.kitware.com
>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>> Visit other Kitware open-source projects at
>>>>>>>>>>>>>>>>>>>>>>>>>> http://www.kitware.com/opensource/opensource.html
>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>> Please keep messages on-topic and check the VTK
>>>>>>>>>>>>>>>>>>>>>>>>>> FAQ at: http://www.vtk.org/Wiki/VTK_FAQ
>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>> Follow this link to subscribe/unsubscribe:
>>>>>>>>>>>>>>>>>>>>>>>>>> http://www.vtk.org/mailman/listinfo/vtkusers
>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>>>>>>>>>>>> Unpaid intern in BillsBasement at noware dot com
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>>>> Unpaid intern in BillsBasement at noware dot com
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> --
>>>>>>>>>>>>>> Unpaid intern in BillsBasement at noware dot com
>>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>>
>>>>>
>>>>
>>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.vtk.org/pipermail/vtkusers/attachments/20130814/757cb7e3/attachment.htm>

More information about the vtkusers mailing list