[vtkusers] Building VTK with VS2008 x64 on Windows 7

[Jonathan Morra]

I just did a build on Release, and everything worked fine, however Debug
continued to fail.

On Mon, Apr 23, 2012 at 2:08 PM, Michael Jackson <
mike.jackson at bluequartz.net> wrote:

> Not sure what to provide but basically make sure anything you are building
> and anything that what you are building depends on ALL have the same type
> of build: Release with Debug Info. If some are Release and Some are debug
> then you will get a mixing of the runtime libs and most likely this error.
>
>  Does "Debug" and "Release" both build OK?
> --
> Mike Jackson <www.bluequartz.net>
>
> On Apr 23, 2012, at 4:54 PM, Jonathan Morra wrote:
>
> > OK
> > 1.  What information could I provide/look at myself to help diagnose
> exactly what is going wrong.
> > 2.  Why does this exact same cmake file work fine in Release with debug
> info?
> >
> > On Mon, Apr 23, 2012 at 1:51 PM, Michael Jackson <
> mike.jackson at bluequartz.net> wrote:
> > You seem to be mixing versions of Visual Studio built products or
> service packs of Visual Studio. That is what the "side-by-side
> configuration" means. Basically the executable is looking for one set of
> runtime libs and a library that the executable loads is looking for a
> different set/version of the runtime libraries.
> > ___________________________________________________________
> > Mike Jackson                    Principal Software Engineer
> > BlueQuartz Software                            Dayton, Ohio
> > mike.jackson at bluequartz.net              www.bluequartz.net
> >
> > On Apr 23, 2012, at 4:38 PM, Jonathan Morra wrote:
> >
> > > Does anyone have any ideas on this?  I still can't seem to get it to
> compile.
> > >
> > > On Tue, Apr 17, 2012 at 10:39 PM, Jonathan Morra <jonmorra at gmail.com>
> wrote:
> > > I get the following compilation errors, does anyone know what the
> problem is?  This only happens in Debug, in release everything works fine.
> > > 1>------ Build started: Project: vtkMaterialLibraryConfiguredFiles,
> Configuration: Debug x64 ------
> > > 1>Generating vtkMaterialXMLLibrary.h
> > > 1>The application has failed to start because its side-by-side
> configuration is incorrect. Please see the application event log or use the
> command-line sxstrace.exe tool for more detail.
> > > 1>Project : error PRJ0019: A tool returned an error code from
> "Generating vtkMaterialXMLLibrary.h"
> > > 1>Build log was saved at
> "file://c:\MVS\VTK\bin\x64\Utilities\MaterialLibrary\vtkMaterialLibraryConfiguredFiles.dir\Debug\BuildLog.htm"
> > > 1>vtkMaterialLibraryConfiguredFiles - 1 error(s), 0 warning(s)
> > > 2>------ Build started: Project: vtkParallel, Configuration: Debug x64
> ------
> > > 2>Generating vtkSocketCommunicatorHash.h
> > > 2>The application has failed to start because its side-by-side
> configuration is incorrect. Please see the application event log or use the
> command-line sxstrace.exe tool for more detail.
> > > 2>Project : error PRJ0019: A tool returned an error code from
> "Generating vtkSocketCommunicatorHash.h"
> > > 2>Build log was saved at
> "file://c:\MVS\VTK\bin\x64\Parallel\vtkParallel.dir\Debug\BuildLog.htm"
> > > 2>vtkParallel - 1 error(s), 0 warning(s)
> > > 3>------ Build started: Project: vtkHybrid, Configuration: Debug x64
> ------
> > > 3>Linking...
> > > 3>LINK : fatal error LNK1104: cannot open file
> '..\bin\Debug\vtkParallel.lib'
> > > 3>Build log was saved at
> "file://c:\MVS\VTK\bin\x64\Hybrid\vtkHybrid.dir\Debug\BuildLog.htm"
> > > 3>vtkHybrid - 1 error(s), 0 warning(s)
> > > 4>------ Build started: Project: vtkWidgets, Configuration: Debug x64
> ------
> > > 4>Linking...
> > > 4>LINK : fatal error LNK1104: cannot open file
> '..\bin\Debug\vtkHybrid.lib'
> > > 4>Build log was saved at
> "file://c:\MVS\VTK\bin\x64\Widgets\vtkWidgets.dir\Debug\BuildLog.htm"
> > > 4>vtkWidgets - 1 error(s), 0 warning(s)
> > > 5>------ Build started: Project: vtkInfovis, Configuration: Debug x64
> ------
> > > 5>Linking...
> > > 5>LINK : fatal error LNK1104: cannot open file
> '..\bin\Debug\vtkWidgets.lib'
> > > 5>Build log was saved at
> "file://c:\MVS\VTK\bin\x64\Infovis\vtkInfovis.dir\Debug\BuildLog.htm"
> > > 5>vtkInfovis - 1 error(s), 0 warning(s)
> > > 6>------ Build started: Project: vtkViews, Configuration: Debug x64
> ------
> > > 6>Linking...
> > > 6>LINK : fatal error LNK1104: cannot open file
> '..\bin\Debug\vtkInfovis.lib'
> > > 6>Build log was saved at
> "file://c:\MVS\VTK\bin\x64\Views\vtkViews.dir\Debug\BuildLog.htm"
> > > 6>vtkViews - 1 error(s), 0 warning(s)
> > > 7>------ Build started: Project: QVTK, Configuration: Debug x64 ------
> > > 7>Linking...
> > > 7>LINK : fatal error LNK1104: cannot open file
> '..\..\bin\Debug\vtkViews.lib'
> > > 7>Build log was saved at
> "file://c:\MVS\VTK\bin\x64\GUISupport\Qt\QVTK.dir\Debug\BuildLog.htm"
> > > 7>QVTK - 1 error(s), 0 warning(s)
> > > 8>------ Skipped Build: Project: INSTALL, Configuration: Debug x64
> ------
> > > 8>Project not selected to build for this solution configuration
> > > ========== Build: 0 succeeded, 7 failed, 45 up-to-date, 1 skipped
> ==========
> > >
> > >
> > > _______________________________________________
> > > Powered by www.kitware.com
> > >
> > > Visit other Kitware open-source projects at
> http://www.kitware.com/opensource/opensource.html
> > >
> > > Please keep messages on-topic and check the VTK FAQ at:
> http://www.vtk.org/Wiki/VTK_FAQ
> > >
> > > Follow this link to subscribe/unsubscribe:
> > > http://www.vtk.org/mailman/listinfo/vtkusers
> >
> >
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.vtk.org/pipermail/vtkusers/attachments/20120423/cfe8bb9c/attachment.htm>