[vtkusers] Procedure Entry Point not found

[Alexis Cheng]

Hi Jim,

I'm not entirely sure what you mean by a clean make. I tried rebuilding all of VTK's libraries and then rebuilt the program that uses those libraries, but the problem persists. Is it necessary to modify the VTK source files (i.e. replace vtkTypeRevisionMacro with vtkTypeMacro) in VTK 5.6.0?

Thanks,
Alexis Cheng
Electrical Engineering
University of British Columbia

> Date: Sun, 17 Oct 2010 17:42:35 -0400
> From: jimcp at cox.net
> To: acheng_1221 at hotmail.com
> CC: david.gobbi at gmail.com; vtkusers at vtk.org
> Subject: Re: [vtkusers] Procedure Entry Point not found
> 
> Since you are getting this a link time, I would have to think your make 
> after the change did not detect all of the object modules that have 
> output from the vtkTypeRevisionMacro. See if you still have the problem 
> after a clean make.Apparently you have not replaced all of the compiled 
> output that used the vtkTypeRevisionMacro.
> 
> Good luck,
> Jim
> 
> Alexis Cheng wrote:
> > Hi David,
> >
> > Thank you for your reply. I'm using VTK 5.6.0. I tried replacing 
> > vtkTypeRevisionMacro with vtkTypeMacro, but I ended up getting compile 
> > errors regarding CollectRevisions. Do you have any other ideas as to 
> > what may be causing this?
> >
> 
 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.vtk.org/pipermail/vtkusers/attachments/20101017/9be12b0e/attachment.htm>