[vtkusers] CMAKE + VTK + QT
Adriano Gagliardi
agagliardi at ara.co.uk
Tue Sep 15 02:42:50 EDT 2009
This is what you have installed:
/usr/bin/qmake-qt4
Can you replace this:
QT_QMAKE_EXECUTABLE=/usr/bin/qmake-NOTFOUND
with what is above ie:
QT_QMAKE_EXECUTABLE=/usr/bin/qmake-qt4
===================================
Adriano Gagliardi MEng PhD
Project Scientist
Computational Aerodynamics
Aircraft Research Association Ltd.
Manton Lane
Bedford
Tel: 01234 32 4644
E-mail: agagliardi at ara.co.uk
Url: www.ara.co.uk
-----Original Message-----
From: vtkusers-bounces at vtk.org [mailto:vtkusers-bounces at vtk.org] On Behalf
Of Nicolas RANNOU
Sent: 14 September 2009 19:40
To: Francois Bertel
Cc: vtkusers at vtk.org
Subject: Re: [vtkusers] CMAKE + VTK + QT
Hello,
so I checked the symlink. As you said,
/usr/bin/qmake is a symlink pointing to /etc/alternatives/qmake
/etc/alternatives/qmake is a symlink pointing to /usr/bin/qmake-qt4
I checked that it is not pointing to a non-existing file.
and
$ dpkg -S /usr/bin/qmake-qt4
returns
qt4-qmake: /usr/bin/qmake-qt4
So everything seem to be fine...
Thanks,
Nicolas
On Mon, 14 Sep 2009 14:05:43 -0400, Francois Bertel
<francois.bertel at kitware.com> wrote:
> Hello,
>
> On Ubuntu 9.04, the only packages I installed are libqt4-dev and
> libqt4-dev-dbg. Everything else have been installed by automatic
> dependency solving.
>
> Notably,
>
> /usr/bin/qmake is a symlink to /etc/alternatives/qmake
> /etc/alternatives/qmake is a symlink to /usr/bin/qmake-qt4
>
> /usr/bin/qmake-qt4 is provided by package "qt4-qmake" (automatically
> installed with the dependency resolution above)
>
> This command line checks which package provides /usr/bin/qmake-qt4:
> $ dpkg -S /usr/bin/qmake-qt4
> qt4-qmake: /usr/bin/qmake-qt4
>
> Make sure that you /usr/bin/qmake is not a symlink pointing to an
> non-existing file.
>
>
> On Mon, Sep 14, 2009 at 1:46 PM, Nicolas RANNOU
> <nrannou at bwh.harvard.edu>
> wrote:
>> So I uninstalled the QT version I downloaded from qt.nokia and I only
> kept
>> the packages downloaded with apt-get.
>>
>> "which qmake" returns
>> /usr/bin/qmake
>>
>> after configuration in the cmake,
>>
>> output:
>> /-----------------------------------------------/
>> Multiple versions of QT found please set DESIRED_QT_VERSION
>> /-----------------------------------------------/
>>
>> but the qmake is still not found...
>> if I highlight QT_QMAKE_EXECUTABLE:
>>
>> QT_QMAKE_EXECUTABLE /usr/bin/qmake-NOTFOUND
>> QT_QMAKE_EXECUTABLE: Invalid qmake found
>>
>>
>>
>>
>> Nicolas
>>
>>
>>
>> On Mon, 14 Sep 2009 18:10:52 +0100, "Adriano Gagliardi"
>> <agagliardi at ara.co.uk> wrote:
>>> Well, if you installed a version from the repository, I'd stick
>>> with
>> that
>>> for the moment. Recompiling Qt from scratch can take a long time
>>> even
> on
>> a
>>> quad-core with multiple processes (using make -j30 it still takes
>>> ~30mins).
>>> I'd delete the version you downloaded from qt.nokia.com and try
>>> using
> the
>>> repository alone.
>>>
>>> On a side note:
>>>
>>> QT_QMAKE_EXECUTABLE
>>> /home/nico/Work/Libs/QT/qt/bin/qmake-NOTFOUND
>>> QT_QMAKE_EXECUTABLE: Invalid qmake found
>>>
>>> Can you verify that qmake exists in that directory? qmake-NOTFOUND
>>> suggests it isn't there. If not, try a `which qmake` to see where it
>>> is located.
>>> These are my vars in my CMakeLists.txt:
>>>
>>>
>>
>
QT_INCLUDE_DIR=/raid2/gagliard/Paraview/qt-x11-opensource-src-4.5.0-64-bin/i
>>> nclude
>>>
>>
>
QT_QMAKE_EXECUTABLE=/raid2/gagliard/Paraview/qt-x11-opensource-src-4.5.0-64-
>>> bin/bin/qmake
>>>
>>>
>>>
>>> ===================================
>>>
>>> Adriano Gagliardi MEng PhD
>>> Project Scientist
>>> Computational Aerodynamics
>>> Aircraft Research Association Ltd.
>>> Manton Lane
>>> Bedford
>>>
>>> Tel: 01234 32 4644
>>> E-mail: agagliardi at ara.co.uk
>>> Url: www.ara.co.uk
>>> -----Original Message-----
>>> From: Nicolas RANNOU [mailto:nrannou at bwh.harvard.edu]
>>> Sent: 14 September 2009 17:39
>>> To: agagliardi at ara.co.uk
>>> Subject: RE: [vtkusers] CMAKE + VTK + QT
>>>
>>> Yes I tried it but it returns other errors:
>>>
>>> /-------------------------------------------------/
>>> Multiple versions of QT found please set DESIRED_QT_VERSION
>>>
>>> CMake Error: The following variables are used in this project, but
> they
>>> are
>>> set to NOTFOUND.
>>> Please set them or make sure they are set and tested correctly in
>>> the CMake
>>> files:
>>> QT_INCLUDE_DIR (ADVANCED)
>>> used as include directory in directory
>>> /home/nico/Work/SimpleView QT_QT_LIBRARY (ADVANCED)
>>> linked by target "qtsimpleview" in directory
>>> /home/nico/Work/SimpleView
>>> /-------------------------------------------------/
>>>
>>> and
>>>
>>> QT_QMAKE_EXECUTABLE
>>> /home/nico/Work/Libs/QT/qt/bin/qmake-NOTFOUND
>>> QT_QMAKE_EXECUTABLE: Invalid qmake found
>>>
>>> So that is probably my QT installation which fails or some paths
>>> which
>> are
>>> not properly defined. I installed QT downloading sources from
>>> http://qt.nokia.com/downloads and executing the downloaded file
>>> (last version). Moreover, I did
>>>
>>> sudo apt-get install libqt4-dev qt4-dev-tools qt4-doc
>>>
>>> to add some missing packages. How do you proceed to do a clean
>>> installation of QT? Just downloading and executing the file from
>>> http://qt.nokia.com/downloads? (I am not very familiar with linux)
>>>
>>> Thanks,
>>>
>>>
>>> Nicolas
>>>
>>> On Mon, 14 Sep 2009 17:18:53 +0100, "Adriano Gagliardi"
>>> <agagliardi at ara.co.uk> wrote:
>>>> Try setting QT_QMAKE_EXECUTABLE to the explicit location of qmake
>>>> in advanced options ie QT_QMAKE_EXECUTABLE=/home/john/qt/bin/qmake.
>>>> Then reconfigure and it should pick up the version of Qt, including
>>>> all the libs it requires, based on qmake. This works for me when
>>>> I'm switching between Qt versions.
>>>>
>>>>
>>>> ===================================
>>>>
>>>> Adriano Gagliardi MEng PhD
>>>> Project Scientist
>>>> Computational Aerodynamics
>>>> Aircraft Research Association Ltd.
>>>> Manton Lane
>>>> Bedford
>>>>
>>>> Tel: 01234 32 4644
>>>> E-mail: agagliardi at ara.co.uk
>>>> Url: www.ara.co.uk
>>>> -----Original Message-----
>>>> From: vtkusers-bounces at vtk.org [mailto:vtkusers-bounces at vtk.org] On
>>> Behalf
>>>> Of Nicolas RANNOU
>>>> Sent: 14 September 2009 17:14
>>>> To: vtkusers at vtk.org
>>>> Subject: [vtkusers] CMAKE + VTK + QT
>>>>
>>>> Hi all,
>>>>
>>>> I'm currently trying to build the QT examples in VTK/Examples/GUI.
>>>>
>>>> I'm working on ubuntu 9.
>>>>
>>>> I built cmake doing: sudo apt-get install cmake I built qt doing:
>>>> downloading sources from http://qt.nokia.com/downloads and
>>>> executing the downloaded file (last version).
>>>> I downoaded vtk on kitware website (last version) then built it
>>>> with cmake.
>>>>
>>>> QT and VTK work separately.
>>>>
>>>> But I can't get the vtk QT examples working. I can't even build the
>>>> CMakeLists.txt .
>>>>
>>>>
>>>> I get the following errors when I configure the cmake.
>>>>
>>>> /--------------------------------------------------------/
>>>> Multiple versions of QT found please set DESIRED_QT_VERSION
>>>>
>>>> CMake Error: The following variables are used in this project, but
>>>> they are set to NOTFOUND.
>>>> Please set them or make sure they are set and tested correctly in
> the
>>>> CMake
>>>> files:
>>>> QT_INCLUDE_DIR (ADVANCED)
>>>> used as include directory in directory
> /home/nico/Work/SimpleView
>>>> QT_QT_LIBRARY (ADVANCED)
>>>> linked by target "qtsimpleview" in directory
>>>> /home/nico/Work/SimpleView
>>>> /--------------------------------------------------------/
>>>>
>>>> I changed the QT desired version number to 4 but there are still
> errors:
>>>>
>>>>
>>>> /--------------------------------------------------------/
>>>>
>>>> CMake was unable to find desired QT version: 4. Set advanced
>>>> values QT_QMAKE_EXECUTABLE and QT4_QGLOBAL_FILE.
>>>>
>>>> CMake Error: The following variables are used in this project, but
>>>> they are set to NOTFOUND.
>>>> Please set them or make sure they are set and tested correctly in
> the
>>>> CMake
>>>> files:
>>>> QT_INCLUDE_DIR (ADVANCED)
>>>> used as include directory in directory
> /home/nico/Work/SimpleView
>>>> /--------------------------------------------------------/
>>>>
>>>> I've been searching a lot on the internet but I couldn't find the
>>>> solution.
>>>> Maybe do I do something wrong during the installation... Another
>>>> strange thing is that when I configure the CMakelists.txt to build
>>>> VTK, via the GUI, I can't turn USE_QT on or off (the option is not
>>>> available)
>>>>
>>>> Thanks a lot for your help,
>>>>
>>>>
>>>> Nicolas
>>>>
>>>> _______________________________________________
>>>> Powered by www.kitware.com
>>>>
>>>> Visit other Kitware open-source projects at
>>>> http://www.kitware.com/opensource/opensource.html
>>>>
>>>> Please keep messages on-topic and check the VTK FAQ at:
>>>> http://www.vtk.org/Wiki/VTK_FAQ
>>>>
>>>> Follow this link to subscribe/unsubscribe:
>>>> http://www.vtk.org/mailman/listinfo/vtkusers
>>>>
>>>>
>>>> ---------------------------
>>>> This email contains information that is private and confidential
>>>> and is intended only for the addressee. If you are not the
>>>> intended recipient please delete it and notify us immediately by
>>>> e-mailing the
>>> sender.
>>>> Note: All email sent to or from this address may be accessed by
>>>> someone other than the recipient, for system management and
>>>> security
>>> reasons.
>>>> Aircraft Research Association Ltd. Registered in England,
>>>> Registration
>>> No
>>>> 503668 Registered Office: Manton Lane, Bedford MK41 7PF England VAT
>>>> No GB
>>>> 196351245
>>>
>>>
>>> ---------------------------
>>> This email contains information that is private and confidential and
>>> is intended only for the addressee. If you are not the intended
> recipient
>>> please delete it and notify us immediately by e-mailing the sender.
>>> Note: All email sent to or from this address may be accessed by
>>> someone other than the recipient, for system management and security
reasons.
>>> Aircraft Research Association Ltd. Registered in England,
> Registration
>> No
>>> 503668 Registered Office: Manton Lane, Bedford MK41 7PF England VAT
>>> No
> GB
>>> 196351245
>>
>> _______________________________________________
>> Powered by www.kitware.com
>>
>> Visit other Kitware open-source projects at
> http://www.kitware.com/opensource/opensource.html
>>
>> Please keep messages on-topic and check the VTK FAQ at:
> http://www.vtk.org/Wiki/VTK_FAQ
>>
>> Follow this link to subscribe/unsubscribe:
>> http://www.vtk.org/mailman/listinfo/vtkusers
>>
>
>
>
>
_______________________________________________
Powered by www.kitware.com
Visit other Kitware open-source projects at
http://www.kitware.com/opensource/opensource.html
Please keep messages on-topic and check the VTK FAQ at:
http://www.vtk.org/Wiki/VTK_FAQ
Follow this link to subscribe/unsubscribe:
http://www.vtk.org/mailman/listinfo/vtkusers
---------------------------
This email contains information that is private and confidential and is intended only for the addressee. If you are not the intended recipient please delete it and notify us immediately by e-mailing the sender.
Note: All email sent to or from this address may be accessed by someone other than the recipient, for system management and security reasons.
Aircraft Research Association Ltd. Registered in England, Registration No 503668 Registered Office: Manton Lane, Bedford MK41 7PF England VAT No GB 196351245
More information about the vtkusers
mailing list