[vtkusers] Re: VolumePro1000 SDK problem

Pengfei Liu lpf at vico-lab.com
Wed May 17 09:28:08 EDT 2006 

I have received it. Thank you very much!
  ----- Original Message -----
  From: Kent Ogden
  To: vtkusers at vtk.org
  Sent: Tuesday, May 16, 2006 9:28 PM
  Subject: Fw: [vtkusers] Re: VolumePro1000 SDK problem


  Pengfei,

  Here are the files I modified.  The CMakelists.txt file goes into the
\VTK5\rendering directory, the rest go into \VTK5 or whatever you call the
source directory.  Use at your own risk, and be sure to back up the existing
files before overwriting.

  As I mentioned, I could not get VTK to compile using the VP files on the
vtk.org site.  I am using VS .NET 2003 on WinXP.  When I switched to using
the files that came with the board, it compiled just fine and I can run the
vtk examples modified to use the board.  There is a LARGE performance
increase so I am sure the board is doing its job.

  Good luck . . .

  Kent


  >>> "Pengfei Liu" <lpf at vico-lab.com> 5/15/2006 9:54:36 PM >>>




  Thank you for your suggestions.
  Please send me the CMake file.

  I develop my work in Windows XP
  But I contacted with  Terarecon, they replys that I only needs driver, VLI
SDK is no need. Are the words right?

  PengFei Liu

    ----- Original Message -----
    From: Kent Ogden
    To: vtkusers at vtk.org
    Sent: Monday, May 15, 2006 9:39 PM
    Subject: [vtkusers] Re: VolumePro1000 SDK problem


    Hi,

    I have a VP1000 board, and I am new to VTK, it took me some time to get
it working.  Here's what I've found out:

    1) I couldn't get VTK version 4.4.2 to compile with the .h and .lib
files provided on the vtk web site.  It seems to work fine with the
Terarecon supplied files, but I believe you need to buy the SDK from
Terarecon to get these (I had already purchased the SDK so I had the files).
You should contact Terarecon to see if you can get these files, you don't
need the documentation of the VLI SDK to get vtk to work, just the files
(.h, .lib, and .dll for windows platforms).

    2) VTK 5 doesn't have the VP1000 options available in the CMake files.
I spent some time studying the 4.4 Cmake files to see what needed to be
done, and I was able to modify the vesion 5 makefiles to show the VP1000
options and get them to compile.  All the VP1000 classes are still there in
version 5, so I'm not sure why this was done.  I would guess that Volume Pro
support is going to fade away in vtk.

    If anyone is interested I will send the files I modified for vtk 5 to
the list.

    Kent

    Kent Ogden PhD
    Associate Professor, Radiology
    SUNY Upstate Medical University
    750 E. Adams Street
    Syracuse, NY  13210

    email:  ogdenk at upstate.edu
    voice:  (315) 464-5083
    fax:       (315) 464-5095

    >>> Dan White <dan at chalkie.org.uk> 5/15/2006 1:46:26 AM >>>

    Hi,

    the windows drivers are fre available from vtk website,
    not sure if they work on vtk5

    the linux drivers are available from tererecon if you ask them nicely,
    only on 2.4 kernel though not current 2.6 kernels.

    i haven't had my volumepro beard working for a while due to lack of
    2.6 kernel support.

    Dan

    On May 13, 2006, at 7:01 PM, vtkusers-request at vtk.org wrote:

    > Message: 12
    > Date: Sat, 13 May 2006 15:06:21 +0800
    > From: "Pengfei Liu" <lpf at vico-lab.com>
    > Subject: [vtkusers] VolumePro1000 SDK problem
    > To: <vtkusers at vtk...org>
    > Message-ID: <008501c6765b$e968f870$1601a8c0 at vicolpf>
    > Content-Type: text/plain;    charset="ISO-8859-1"
    >
    > Hi, all
    >
    > I plan to run VTK with VolumePro1000 card.
    > I get to know that the VolumePro's SDK: VLI needs to Buy,
    > so I want to know VLI is necessary for VolumePro run under VTK or
    > VolumePro dirver installation is enough?
    >
    > Anyone who uses VolumePro helps me to confirm it!
    >
    > Best Regards
    > PengFei Liu
    >

    Dr. Daniel James White BSc. (Hons.) PhD
    Bioimaging Coordinator
    Nanoscience Centre and Department of Biological and Environmental
    Sciences
    Division of Molecular Recognition
    Ambiotica C242
    PO Box 35
    University of Jyväskylä
    Jyväskylä
    FIN 40014
    Finland

    +358 14 260 4183 (work)
    +358 468102840 (mobile)
    http://www.bioimagexd.org
    http://www.chalkie.org.uk
    dan at chalkie.org.uk
    white at cc.jyu.fi


    _______________________________________________
    This is the private VTK discussion list.
    Please keep messages on-topic. Check the FAQ at:
http://www.vtk.org/Wiki/VTK_FAQ
    Follow this link to subscribe/unsubscribe:
    http://www.vtk.org/mailman/listinfo/vtkusers



----------------------------------------------------------------------------


    _______________________________________________
    This is the private VTK discussion list.
    Please keep messages on-topic. Check the FAQ at:
http://www.vtk.org/Wiki/VTK_FAQ
    Follow this link to subscribe/unsubscribe:
    http://www.vtk.org/mailman/listinfo/vtkusers



----------------------------------------------------------------------------
--


  _______________________________________________
  This is the private VTK discussion list.
  Please keep messages on-topic. Check the FAQ at:
http://www.vtk.org/Wiki/VTK_FAQ
  Follow this link to subscribe/unsubscribe:
  http://www.vtk.org/mailman/listinfo/vtkusers
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.vtk.org/pipermail/vtkusers/attachments/20060517/2c37fb31/attachment.htm>

More information about the vtkusers mailing list