Fw: [vtkusers] Re: VolumePro1000 SDK problem

[Pengfei Liu]

Thank you for your suggestions.
Please send me the CMake file.

I develop my work in Windows XP
But I contacted with  Terarecon, they replys that I only needs driver, VLI
SDK is no need. Are the words right?

PengFei Liu

  ----- Original Message -----
  From: Kent Ogden
  To: vtkusers at vtk.org
  Sent: Monday, May 15, 2006 9:39 PM
  Subject: [vtkusers] Re: VolumePro1000 SDK problem


  Hi,

  I have a VP1000 board, and I am new to VTK, it took me some time to get it
working.  Here's what I've found out:

  1) I couldn't get VTK version 4.4.2 to compile with the .h and .lib files
provided on the vtk web site.  It seems to work fine with the Terarecon
supplied files, but I believe you need to buy the SDK from Terarecon to get
these (I had already purchased the SDK so I had the files).  You should
contact Terarecon to see if you can get these files, you don't need the
documentation of the VLI SDK to get vtk to work, just the files (.h, .lib,
and .dll for windows platforms).

  2) VTK 5 doesn't have the VP1000 options available in the CMake files.  I
spent some time studying the 4.4 Cmake files to see what needed to be done,
and I was able to modify the vesion 5 makefiles to show the VP1000 options
and get them to compile.  All the VP1000 classes are still there in version
5, so I'm not sure why this was done.  I would guess that Volume Pro support
is going to fade away in vtk.

  If anyone is interested I will send the files I modified for vtk 5 to the
list.

  Kent

  Kent Ogden PhD
  Associate Professor, Radiology
  SUNY Upstate Medical University
  750 E. Adams Street
  Syracuse, NY  13210

  email:  ogdenk at upstate.edu
  voice:  (315) 464-5083
  fax:       (315) 464-5095

  >>> Dan White <dan at chalkie.org.uk> 5/15/2006 1:46:26 AM >>>

  Hi,

  the windows drivers are fre available from vtk website,
  not sure if they work on vtk5

  the linux drivers are available from tererecon if you ask them nicely,
  only on 2.4 kernel though not current 2.6 kernels.

  i haven't had my volumepro beard working for a while due to lack of
  2.6 kernel support.

  Dan

  On May 13, 2006, at 7:01 PM, vtkusers-request at vtk.org wrote:

  > Message: 12
  > Date: Sat, 13 May 2006 15:06:21 +0800
  > From: "Pengfei Liu" <lpf at vico-lab.com>
  > Subject: [vtkusers] VolumePro1000 SDK problem
  > To: <vtkusers at vtk..org>
  > Message-ID: <008501c6765b$e968f870$1601a8c0 at vicolpf>
  > Content-Type: text/plain;    charset="ISO-8859-1"
  >
  > Hi, all
  >
  > I plan to run VTK with VolumePro1000 card.
  > I get to know that the VolumePro's SDK: VLI needs to Buy,
  > so I want to know VLI is necessary for VolumePro run under VTK or
  > VolumePro dirver installation is enough?
  >
  > Anyone who uses VolumePro helps me to confirm it!
  >
  > Best Regards
  > PengFei Liu
  >

  Dr. Daniel James White BSc. (Hons.) PhD
  Bioimaging Coordinator
  Nanoscience Centre and Department of Biological and Environmental
  Sciences
  Division of Molecular Recognition
  Ambiotica C242
  PO Box 35
  University of Jyväskylä
  Jyväskylä
  FIN 40014
  Finland

  +358 14 260 4183 (work)
  +358 468102840 (mobile)
  http://www.bioimagexd.org
  http://www.chalkie.org.uk
  dan at chalkie.org.uk
  white at cc.jyu.fi


  _______________________________________________
  This is the private VTK discussion list.
  Please keep messages on-topic. Check the FAQ at:
http://www.vtk.org/Wiki/VTK_FAQ
  Follow this link to subscribe/unsubscribe:
  http://www.vtk.org/mailman/listinfo/vtkusers



----------------------------------------------------------------------------
--


  _______________________________________________
  This is the private VTK discussion list.
  Please keep messages on-topic. Check the FAQ at:
http://www.vtk.org/Wiki/VTK_FAQ
  Follow this link to subscribe/unsubscribe:
  http://www.vtk.org/mailman/listinfo/vtkusers
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.vtk.org/pipermail/vtkusers/attachments/20060516/8b5592ed/attachment.htm>