[Paraview] ParaView 4.1.0 (UNCLASSIFIED)

Utkarsh Ayachit utkarsh.ayachit at kitware.com
Tue Jan 14 13:57:02 EST 2014


I suspect that has something to do with KDE/X Windowing system. I wonder if
anyone else on this list has seen this problem.

Utkarsh


On Tue, Jan 14, 2014 at 1:53 PM, Angelini, Richard C (Rick) CIV USARMY ARL
(US) <richard.c.angelini.civ at mail.mil> wrote:

> Classification: UNCLASSIFIED
> Caveats: NONE
>
> If I run with the "-dr" flag, the color map window shows up inside of the
> main GUI (on the right hand side of the GL window) and works correctly.
> If
> I drag the color map editor tool outside of the main gui,  I get the same
> behavior of the window disappearing if the cursor is outside of the main GL
> window.
>
>
>
> ________________________________
> Rick Angelini
> USArmy Research Laboratory
> CISD/HPC Architectures Team
> Building 120 Cube 315
> Aberdeen Proving Ground, MD
> Phone:  410-278-6266
>
>
> -----Original Message-----
> From: Utkarsh Ayachit [mailto:utkarsh.ayachit at kitware.com]
> Sent: Tuesday, January 14, 2014 1:26 PM
> To: Angelini, Richard C (Rick) CIV USARMY ARL (US)
> Cc: ParaView
> Subject: Re: ParaView 4.1.0 (UNCLASSIFIED)
>
> Rick,
>
> Can you try running ParaView with "-dr" command line option and see if the
> problem persists?
>
> Utkarsh
>
>
> On Tue, Jan 14, 2014 at 12:31 PM, Angelini, Richard C (Rick) CIV USARMY ARL
> (US) <richard.c.angelini.civ at mail.mil> wrote:
>
>
>         Classification: UNCLASSIFIED
>         Caveats: NONE
>
>         I'm seeing some weirdness with the color map editor.   If I choose
> the color
>         map editor option, a separate window pops up as expected.  But when
> I move
>         my cursor from the main window over to the color map pop-up window,
> the
>         color map window disappears.  If I move my cursor back to the main
> window,
>         the color map pop-up reappears.   If I drag the main GUI window
> over
> to so
>         that the edges of the main GUI window and the color map popup
> window
> are
>         touching, then the color map editor window does not disappear.
>
>         I'm using the Linux_64 prebuilt binary on a RHEL5 Linux system
> running KDE
>         3.5.4.
>
>         ________________________________
>         Rick Angelini
>         USArmy Research Laboratory
>         CISD/HPC Architectures Team
>         Building 120 Cube 315
>         Aberdeen Proving Ground, MD
>         Phone:  410-278-6266
>
>
>         -----Original Message-----
>         From: ParaView [mailto:paraview-bounces at paraview.org] On Behalf Of
> Utkarsh
>         Ayachit
>         Sent: Monday, January 13, 2014 12:25 PM
>         To: ParaView
>         Cc: ParaView Developers
>         Subject: [Paraview] ANN: ParaView 4.1.0 is available for download
>
>         Folks,
>
>
>
>
>         ParaView 4.1.0 is now available for download
>         (http://paraview.org/paraview/resources/software.php
>         <http://paraview.org/paraview/resources/software.php> ). With over
> 170
>         issues resolved, this release includes several bug fixes and
> feature
>         enhancements. For a detailed list of issues resolved, refer to the
> change
>         log (http://paraview.org/Bug/changelog_page.php
>         <http://paraview.org/Bug/changelog_page.php> ).  Some of the
> notable
>         enhancements in this release are as follows:
>
>
>         Redesigned Color Map Editor panel
>
>         This release introduces a completely designed panel for editing
> color and
>         opacity transfer functions for scalar coloring. The panel, which is
> now a
>         dockable widget, instead of a popup dialog, makes it easier to edit
> transfer
>         functions as well as edit labels and annotations on the color
> legend
> or
>         scalar bar. This also makes it easier to access some of the
> functionality
>         introduced in the previous version of ParaView, such as categorical
> colors.
>         It is now easier to edit transfer functions when using log scaling
> as the
>         transfer function editor view now switches to log space.
>
>
>
>
> <
> https://lh3.googleusercontent.com/KT5sVRI8U1GjtliypOEgy3REYvVsZl6YihSYcKJ1c
>
>
> GP_0mPIpDvs4tutNRCD-dh22l_aCXV7FjCobEi0DsnSIMvifFMZqr3vYrw0HZPxOJIIwbh963WvR
> <
> https://lh3.googleusercontent.com/KT5sVRI8U1GjtliypOEgy3REYvVsZl6YihSYcKJ1c
>
> GP_0mPIpDvs4tutNRCD-dh22l_aCXV7FjCobEi0DsnSIMvifFMZqr3vYrw0HZPxOJIIwbh963WvR
> >
>         p_acg>
>
>
>
>
>
>         Enhancements to Find Data dialog
>
>         Find Data dialog, introduced several versions ago, has quickly
> become of the
>         main mechanisms for creating new selections. However, until now, if
> the user
>         created selection using some other mechanism, such as selecting
> cells in the
>         3D view, the Find Data dialog could not be used to inspect that
> selection.
>         One had to use what was called the Selection Inspector. That has
> now
> been
>         changed. Find Data dialog has been updated to always show the
> active
>         selection, no matter how it was created.
>
>
>         Selection Inspector panel has been removed. Selection Inspector was
>         primarily used to control how selections are labelled, their font
>         properties, etc. One can affect these directly from the Find Data
> dialog or
>         the new Selection Display Inspector which is dockable panel
> specially
>         designed for picking selection labels, label properties, or showing
> the
>         selection frustum for frustum based selections.
>
>
>
>
> <
> https://lh3.googleusercontent.com/32EfgOk8F9VyKJJi2AuPaqR1TukxdEHY5uCgQHxTd
>
>
> AJ2EduZTFJR9nmjdMBlLRjKbNXn7fkHl3GL23mG6FywA2unhn7uiyDbPvoKeIA-uE9SLs0GPD_cx
>         4_tJA
> <
> https://lh3.googleusercontent.com/32EfgOk8F9VyKJJi2AuPaqR1TukxdEHY5uCgQHxTd
>
> AJ2EduZTFJR9nmjdMBlLRjKbNXn7fkHl3GL23mG6FywA2unhn7uiyDbPvoKeIA-uE9SLs0GPD_cx
> 4_tJA> >
>
>
>
>
>
>         Enhancements for interactions with Plots
>
>         Inspired by plots in matplotlib, individual axes in line and bar
> charts can
>         now be zoomed by right-clicking and dragging along the x- or y-
> axis. Of
>         course, one can still drag diagonally to scale both axes as before.
> Also the
>         the user interactions for making new selections in line chart view
> have been
>         cleaned up to be more consistent with the render view.
>
>
>         Support for Python-based views
>
>         This release adds mechanisms to enable Python developers to
> integrate views
>         that use libraries such as matplotlib for rendering. This will make
> it
>         possible to take ParaView's charting capabilities even further.
> More
> details
>         on how to create such views can be found on Kitware blog
>         (http://www.kitware.com/blog/home/post/588
>         <http://www.kitware.com/blog/home/post/588> ).
>
>
>         ParaView Catalyst: Zero-Copy infrastructure for transferring data
>
>         A set of experimental interfaces have been added for reusing
> simulation
>         memory in portions of a Catalyst pipeline. A vtkMappedDataArray
> subclass may
>         be used for attribute/coordinate arrays, and
> vtkMappedUnstructuredGrid is
>         used for dataset topologies. More information can be found at
>
>
> http://www.paraview.org/Wiki/CoProcessing#Experimental:_Reusing_simulation_m
>         emory
>
> <
> http://www.paraview.org/Wiki/CoProcessing#Experimental:_Reusing_simulation_
>         memory> .
>
>
>         ParaView Catalyst: Editions
>
>         Several new editions of ParaView Catalyst are now available for
> download and
>         are routinely built and tested. These editions are:
>
>
>         Base
>
>         minimal set of dependencies needed for Catalyst
>
>         Base-Python
>
>         Base with Python support
>
>         Essentials
>
>         Base + dependencies needed for Calculator, Contour, Clip, Cut and
> Glyph
>         filters.
>
>         Essentials-Python
>
>         Essentials with Python support
>
>         Extras
>
>         Essentials + dependencies needed for ExtractHistogram, WarpScalar,
>         WarpVector, IntegrateAttributes, Extract Surface filters.
>
>         Extras-Python
>
>         Extras with Python support
>
>
>         SurfaceLIC and support for Parallel Rendering
>
>         One of the notable community contributions for this release
> includes
>         extensions to the ParaView Line Integral Convolution contributed by
> Lawrence
>         Berkeley National Laboratory (LBNL). Details can be found on the
> Wiki
>         (http://paraview.org/Wiki/ParaView/Line_Integral_Convolution
>         <http://paraview.org/Wiki/ParaView/Line_Integral_Convolution> ).
> The
>         implementation has been designed to work with composite data in
> parallel and
>         includes a number of customizations that facilitate interactive
> data
>         exploration.
>
>
>
>
> <
> https://lh4.googleusercontent.com/nlTQ7Q0K6hu7RIWDibKlm2ABkaFF3-7BzLzHmPBPA
>
>
> vbaZwYFpkV3j68TXqXk_yRs_y6TX1p7SsDxDu4uOPGFUJEvKigV7kB6-7ty0nRfwtAxPBFCdXS7f
> <
> https://lh4.googleusercontent.com/nlTQ7Q0K6hu7RIWDibKlm2ABkaFF3-7BzLzHmPBPA
>
> vbaZwYFpkV3j68TXqXk_yRs_y6TX1p7SsDxDu4uOPGFUJEvKigV7kB6-7ty0nRfwtAxPBFCdXS7f
> >
>         oRrpw>
>         Surface LIC showing coherent structures in the magnetic fields of
> turbulent
>         plasma.
>
>
>
>         Updates to ParaViewWeb
>
>         ParaViewWeb was integrated into ParaView binaries in the previous
> release.
>         This release includes several fixes and enhancements to simplify
> use
> and
>         deployment as well as updates to the WebGL rendering support. This
>         implementation supports modern browsers with WebSocket capabilities
>         including Safari 6+, Chrome 14+, Firefox 11+ and IE 10+.
>
>
>         As always, we look forward to your feedback
> (http://paraview.uservoice.com
>         <http://paraview.uservoice.com> ).
>
>         Also stay tuned to the Kitware Blog (http://www.kitware.com/blog/
>         <http://www.kitware.com/blog/> ) for more details on Catalyst and
>         ParaViewWeb.
>
>
>         The ParaView Team
>
>
>
>
>         Classification: UNCLASSIFIED
>         Caveats: NONE
>
>
>
>
>
>
> Classification: UNCLASSIFIED
> Caveats: NONE
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.paraview.org/pipermail/paraview/attachments/20140114/a34fe0be/attachment.html>


More information about the ParaView mailing list