[Paraview] paraview installation error

[Pradeep Jha]

Installing in a different build directory seems to have done the trick.
Maybe there were some conflicts with the existing older files. Thanks for
your help.


2013/3/13 David E DeMarle <dave.demarle at kitware.com>

> Sorry, nothing comes to my mind after looking at the config, other than it
> is possible that the build system got confused and you should try a clean
> build in a new build directory. When you do, please save off the entire
> build output (make -j 1>& buildout.txt&; tail -f buildout.txt) so that we
> can see what happens when vtkFiltersParallelMPI is built and later wrapped
> into ParaView's client server (CS) control language.
>
>
>
> David E DeMarle
> Kitware, Inc.
> R&D Engineer
> 21 Corporate Drive
> Clifton Park, NY 12065-8662
> Phone: 518-881-4909
>
>
> On Tue, Mar 12, 2013 at 12:02 PM, Pradeep Jha <
> pradeep at ccs.engg.nagoya-u.ac.jp> wrote:
>
>> Thanks for the response. I am attaching the CMakeCache.txt file with this
>> email.
>>
>>
>> 2013/3/12 David E DeMarle <dave.demarle at kitware.com>
>>
>>> These look like two separate issues to me.
>>>
>>> On Tue, Mar 12, 2013 at 1:40 AM, Pradeep Jha <
>>> pradeep at ccs.engg.nagoya-u.ac.jp> wrote:
>>>
>>>> I am trying to install Paraview on a supercomputer with OSMesa support.
>>>> I have installed OSMesa and everything else required and set my
>>>> configurations according to this page<http://paraview.org/Wiki/ParaView/Users_Guide/Parallel_Rendering#Offscreen_Software_Rendering_via_OSMesa>in the cmake file.
>>>>
>>>> The only thing is I cannot find the libGLU.so on the computer. To
>>>> install the libGLU, when I use the rpm file, I get the following output:
>>>>
>>>> ----------------------------------------------------------------------------
>>>> [k00603 at fe01p08 HH-1298]$rpm2cpio
>>>> /home/hp120242/k00603/distfiles/HH-1298/mesa-libGLU-6.5.1-7.10.el5.x86_64.rpm
>>>> | cpio -id
>>>> cpio: ./usr/lib64/libGLU.so.1 not created: newer or same age version
>>>> exists
>>>> cpio: ./usr/lib64/libGLU.so.1.3.060501 not created: newer or same age
>>>> version exists
>>>> 1026 blocks
>>>>
>>>> ----------------------------------------------------------------------------
>>>>
>>>> When I did:
>>>> ---------------------------------------------------------------
>>>> [k00603 at fe01p09 ~]$locate libGLU
>>>> /usr/lib/libGLU.so.1
>>>> /usr/lib/libGLU.so.1.3.060501
>>>> /usr/lib64/libGLU.so.1
>>>> /usr/lib64/libGLU.so.1.3.060501
>>>>  ----------------------------------------------------
>>>> so I set the "OPENGL_glu_LIBRARY" environment to
>>>> "/usr/lib64/libGLU.so.1" and generate the Makefile using Cmake.
>>>>
>>>>
>>> That seems like it should be fine. The RPM is just telling you that you
>>> already have a GLU.
>>> FWIW: Personally I've always just downloaded Mesa source and built it
>>> myself locally rather than using the package manager to install it for
>>> everyone. Doing so I'm sure to use the libGLU that comes with mesa.
>>>
>>>
>>> After this when I run the "make" command, I am getting the following
>>>> error:
>>>>
>>>> --------------------------------------------------------------------------------------------------------
>>>> [ 87%] Built target vtkRenderingMatplotlibCS
>>>> [ 88%] Built target vtkPVServerManagerRenderingCS
>>>> [ 89%] Built target vtkRenderingLODCS
>>>> [ 90%] Built target vtkPVServerManagerDefaultCS
>>>> Linking CXX shared library ../../../lib/
>>>> libvtkPVServerManagerApplication-pv3.98.so<http://libvtkpvservermanagerapplication-pv3.98.so/>
>>>> CMakeFiles/vtkPVServerManagerApplication.dir/vtkInitializationHelper.cxx.o:
>>>> In function `PARAVIEW_CSSTREAMS_INITIALIZE(vtkClientServerInterpreter*)':
>>>> vtkInitializationHelper.cxx:(.text+0x355): undefined reference to
>>>> `vtkFiltersParallelMPICS_Initialize'
>>>> collect2: ld returned 1 exit status
>>>> make[2]: *** [lib/libvtkPVServerManagerApplication-pv3.98.so.1] Error 1
>>>> make[1]: ***
>>>> [ParaViewCore/ServerManager/SMApplication/CMakeFiles/vtkPVServerManagerApplication.dir/all]
>>>> Error 2
>>>> make: *** [all] Error 2
>>>> ----------------------------------------------------
>>>> ----------------------------------------------------
>>>>
>>>>
>>> This error is entirely different and doesn't have anything to do with
>>> Mesa. It is saying that the vtk library vtkFiltersParallelMPI isn't right.
>>> Are you using an external VTK by any chance, and one without MPI turned on
>>> in cmake? If so, don't. The ability to use an external VTK, rather than the
>>> one that comes inside VTK is still brand new in ParaView 3.98. If not, can
>>> you send me the CMakeCache.txt in you build tree? I might be able to spot
>>> what is wrong from that.
>>>
>>>
>>>> Any ideas what am I doing wrong?
>>>>
>>>> _______________________________________________
>>>> Powered by www.kitware.com
>>>>
>>>> Visit other Kitware open-source projects at
>>>> http://www.kitware.com/opensource/opensource.html
>>>>
>>>> Please keep messages on-topic and check the ParaView Wiki at:
>>>> http://paraview.org/Wiki/ParaView
>>>>
>>>> Follow this link to subscribe/unsubscribe:
>>>> http://www.paraview.org/mailman/listinfo/paraview
>>>>
>>>>
>>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.paraview.org/pipermail/paraview/attachments/20130314/2ac4fc19/attachment.htm>