[Paraview] VTK Writer

Sebastien Jourdain sebastien.jourdain at kitware.com
Mon May 14 10:45:23 EDT 2012


Thanks Tony for your feedback.

Here is the bug associated with that topic:
http://www.paraview.org/Bug/view.php?id=13172

On Fri, May 11, 2012 at 7:28 PM, Luis Martinez <lamtmartos at hotmail.com> wrote:
> Hi all,
>
> I was able to get it to work in 3.14 by doing:
>
>         PlotOverLine1.UpdatePipeline()
>
> before creating the writer.
>
> Thanks,
>
> Tony
>
>
>
>> Date: Fri, 11 May 2012 09:18:29 -0400
>
>> Subject: Re: [Paraview] VTK Writer
>> From: utkarsh.ayachit at kitware.com
>> To: mmnasr at gmail.com
>> CC: lamtmartos at hotmail.com; paraview at paraview.org
>
>>
>> There definitely seems to be a bug in the WriterFactory which fails to
>> return valid readers when running through Python. We are looking into
>> it.
>>
>> Utkarsh
>>
>> On Thu, May 10, 2012 at 10:38 PM, Mohamad M. Nasr-Azadani
>> <mmnasr at gmail.com> wrote:
>> > Luis,
>> >
>> > I had similar problem with some writers.
>> > It was very strange and sporadic (it occurred both when I used *.vtu and
>> > *.csv writers).
>> > I kind of got the feeling that most of the times it appeared when I ran
>> > PV
>> > in parallel so I could solve it by running PV in serial mode.
>> > But as I said, I am not 100% what is going on.
>> >
>> > Good luck,
>> > Mohamad
>> >
>> > On Sun, May 6, 2012 at 11:44 AM, Luis Martinez <lamtmartos at hotmail.com>
>> > wrote:
>> >>
>> >> Hi all,
>> >>
>> >> I have a pvbatch script that worked in version 3.12. It uses plot over
>> >> line and writes out CSV data.  Now I get the following error in version
>> >> 3.14:
>> >>
>> >> Is this a bug or am I supposed to call the writer differently in 3.14?
>> >>
>> >> Thanks!
>> >>
>> >> Tony
>> >>
>> >>
>> >>
>> >> ERROR: In
>> >>
>> >> /build/buildd/paraview-3.14.1/ParaViewCore/ServerManager/vtkSMWriterFactory.cxx,
>> >> line 374
>> >> vtkSMWriterFactory (0x17ee360): No matching writer found for extension:
>> >> csv
>> >>
>> >> Traceback (most recent call last):
>> >>   File "wakeProfilesAllTurbines.py", line 65, in <module>
>> >>     writer.FieldAssociation = "Points"
>> >> AttributeError: 'NoneType' object has no attribute 'FieldAssociation'
>> >>
>> >>
>> >>
>> >>
>> >> Here is the script Im using:
>> >>
>> >>
>> >>
>> >> try: paraview.simple
>> >> except: from paraview.simple import *
>> >> paraview.simple._DisableFirstRenderCameraReset()
>> >> import os
>> >> import math
>> >> import matplotlib as mpl
>> >> mpl.use('Agg')
>> >> import matplotlib.pyplot as plt
>> >> import csv
>> >> from scipy.integrate import trapz
>> >> # Current location
>> >> directory=os.getcwd()
>> >> if not os.path.exists('./wakeProfiles/plots/'):
>> >>     os.makedirs('./wakeProfiles/plots/')
>> >> # Rotor Diameter
>> >> D=93
>> >> width=D*1.5
>> >> profiles=[0.125,0.25,0.5,0.75,1,2,3,4]
>> >> layout=open('./layout.dat')
>> >> Umean_slice_0_vtk = LegacyVTKReader(
>> >>
>> >> FileNames=[directory+'/../ADM/sliceDataADM/12746.8908019/Umean_slice_0.vtk']
>> >> )
>> >> Umean_slice_1_vtk = LegacyVTKReader(
>> >> FileNames=[directory+'/../ALM/sliceDataALM/12771/Umean_slice_0.vtk'] )
>> >> SetActiveSource(Umean_slice_0_vtk)
>> >> CellDatatoPointData1 = CellDatatoPointData()
>> >> SetActiveSource(CellDatatoPointData1)
>> >> Calculator1 = Calculator()
>> >> Calculator1.AttributeMode = 'point_data'
>> >> Calculator1.Function = 'Umean_X*cos(0.84444265) +
>> >> Umean_Y*sin(0.84444265)'
>> >> Calculator1.ResultArrayName = 'U_row'
>> >> SetActiveSource(Umean_slice_1_vtk)
>> >> CellDatatoPointData2 = CellDatatoPointData()
>> >> SetActiveSource(CellDatatoPointData2)
>> >> Calculator2 = Calculator()
>> >> Calculator2.AttributeMode = 'point_data'
>> >> Calculator2.Function = 'Umean_X*cos(0.84444265) +
>> >> Umean_Y*sin(0.84444265)'
>> >> Calculator2.ResultArrayName = 'U_row'
>> >> for i, turbine in enumerate(layout):
>> >>     for profile in profiles:
>> >>         SetActiveSource(Calculator1)
>> >>         PlotOverLine1 = PlotOverLine( Source="High Resolution Line
>> >> Source"
>> >> )
>> >>         PlotOverLine1.Source.Resolution = 100
>> >>         alpha0=0.84444265-math.atan((width/2)/(profile*D))
>> >>         alpha1=0.84444265+math.atan((width/2)/(profile*D))
>> >>         L=math.sqrt((D*profile)**2+(width/2)**2)
>> >>         x0=float(turbine.split()[0])+L*math.cos(alpha0)
>> >>         y0=float(turbine.split()[1])+L*math.sin(alpha0)
>> >>         x1=float(turbine.split()[0])+L*math.cos(alpha1)
>> >>         y1=float(turbine.split()[1])+L*math.sin(alpha1)
>> >>         PlotOverLine1.Source.Point1 = [x0, y0, 65.0]
>> >>         PlotOverLine1.Source.Point2 = [x1, y1, 65.0]
>> >>         if not os.path.exists('./wakeProfiles/'+str(profile)):
>> >>             os.makedirs('./wakeProfiles/'+str(profile))
>> >>         if not os.path.exists('./wakeProfiles/plots/'+str(profile)):
>> >>             os.makedirs('./wakeProfiles/plots/'+str(profile))
>> >>
>> >>
>> >> nameADM=directory+'/wakeProfiles/'+str(profile)+'/ADM'+'turbine'+str(i+1)+'.csv'
>> >>         writer = CreateWriter(nameADM, PlotOverLine1)
>> >>         writer.FieldAssociation = "Points"
>> >>         writer.UpdatePipeline()
>> >>         del writer
>> >>         SetActiveSource(Calculator2)
>> >>         PlotOverLine2 = PlotOverLine( Source="High Resolution Line
>> >> Source"
>> >> )
>> >>         PlotOverLine2.Source.Resolution = 100
>> >>         PlotOverLine2.Source.Point1 = [x0, y0, 65.0]
>> >>         PlotOverLine2.Source.Point2 = [x1, y1, 65.0]
>> >>
>> >>
>> >> nameALM=directory+'/wakeProfiles/'+str(profile)+'/ALM'+'turbine'+str(i+1)+'.csv'
>> >>         writer = CreateWriter(nameALM, PlotOverLine2)
>> >>         writer.FieldAssociation = "Points"
>> >>         writer.UpdatePipeline()
>> >>         del writer
>> >>         csvreader1 = csv.reader(open(nameADM,'rb'))
>> >>         csvreader2 = csv.reader(open(nameALM,'rb'))
>> >>         x,y,x1,y1=[],[],[],[]
>> >>         for j, line in enumerate(csvreader1):
>> >>             if j>0:
>> >>                 x.append((float(line[5])-width/2)/D)
>> >>                 y.append(float(line[0]))
>> >>         for j, line in enumerate(csvreader2):
>> >>             if j>0:
>> >>                 x1.append((float(line[5])-width/2)/D)
>> >>                 y1.append(float(line[0]))
>> >>         plt.plot(x,y,'-',label='ADM',color='black')
>> >>         plt.plot(x1,y1,'--',label='ALM',color='black')
>> >>         plt.xlabel('Distance')
>> >>         plt.ylabel(r'$U$ (m/s)')
>> >>         plt.legend(loc='best')
>> >>         plt.ylim([2,10])
>> >>
>> >>
>> >> plt.savefig('./wakeProfiles/plots/'+str(profile)+'/turbine'+str(i+1)+'.eps')
>> >>
>> >>
>> >> plt.savefig('./wakeProfiles/plots/'+str(profile)+'/turbine'+str(i+1)+'.png')
>> >>         plt.clf()
>> >>         del x,y,x1,y1,csvreader1,csvreader2
>> >>
>> >>
>> >>
>> >>
>> >> _______________________________________________
>> >> Powered by www.kitware.com
>> >>
>> >> Visit other Kitware open-source projects at
>> >> http://www.kitware.com/opensource/opensource.html
>> >>
>> >> Please keep messages on-topic and check the ParaView Wiki at:
>> >> http://paraview.org/Wiki/ParaView
>> >>
>> >> Follow this link to subscribe/unsubscribe:
>> >> http://www.paraview.org/mailman/listinfo/paraview
>> >>
>> >
>> >
>> > _______________________________________________
>> > Powered by www.kitware.com
>> >
>> > Visit other Kitware open-source projects at
>> > http://www.kitware.com/opensource/opensource.html
>> >
>> > Please keep messages on-topic and check the ParaView Wiki at:
>> > http://paraview.org/Wiki/ParaView
>> >
>> > Follow this link to subscribe/unsubscribe:
>> > http://www.paraview.org/mailman/listinfo/paraview
>> >
>
> _______________________________________________
> Powered by www.kitware.com
>
> Visit other Kitware open-source projects at
> http://www.kitware.com/opensource/opensource.html
>
> Please keep messages on-topic and check the ParaView Wiki at:
> http://paraview.org/Wiki/ParaView
>
> Follow this link to subscribe/unsubscribe:
> http://www.paraview.org/mailman/listinfo/paraview
>


More information about the ParaView mailing list