[Paraview] vtkPVMessage.pb.h

Parker, Andrew (UK Filton) Andrew.Parker2 at baesystems.com
Wed Feb 29 10:20:41 EST 2012 

Got it to work had to use SOURCES to add the files

Cheers,
Andy



-----Original Message-----
From: paraview-bounces at paraview.org [mailto:paraview-bounces at paraview.org] On Behalf Of Parker, Andrew (UK Filton)
Sent: 29 February 2012 15:01
To: Utkarsh Ayachit
Cc: paraview at paraview.org
Subject: Re: [Paraview] vtkPVMessage.pb.h

*** WARNING ***

  This message has originated outside your organisation,
  either from an external partner or the Global Internet. 
      Keep this in mind if you answer this message.

Hi,

So got there eventually, kind of.  Had to set:

ParaView_DIR

And then it built fine.  However, when I run it, the program dies.  This is fine as the error is that it can't find a symbol, that symbol is in a cpp file that I need to build as part of the plugin.  So how do I do this?  

I've tried adding the files to SERVER_MANAGER_SOURCES, which again compiles but then dies with vtkInstantiatorxdr_strstreamNew().  Basically, how do I tell the cmakelists to compile some cpp files, that do not contain any paraview or vtk specific stuff, but are needed by some of the calls I make inside the plugin which is compiled by the files added to SERVER_MANAGER_SOURCES?

When I had it working in 3.10 I used PARAVIEW_INCLUDE_SOURCES(...) to tell it to build those files and all was good, but using this does not seem to do anything this time round?

Nearly there,
Andy

-----Original Message-----
From: Utkarsh Ayachit [mailto:utkarsh.ayachit at kitware.com] 
Sent: 28 February 2012 15:32
To: Parker, Andrew (UK Filton)
Cc: Sebastien Jourdain; paraview at paraview.org
Subject: Re: [Paraview] vtkPVMessage.pb.h

*** WARNING ***

  This message has originated outside your organisation,
  either from an external partner or the Global Internet. 
      Keep this in mind if you answer this message.

You basically have to create a plugin for your code. Looks like you're creating a reader, take a look at http://www.paraview.org/Wiki/Plugin_HowTo#Adding_a_Reader

You'll create a new plugin for your reader and tell ParaView to build that plugin as one of its own built in plugin, by setting the EXTRA_EXTERNAL_PLUGIN_DIRS cmake variable.

Now when all is built, you can load the plugin using Plugin Manager (it will show up automatically) and even make it "auto-load" on startup.

Hope that helps,
Utkarsh

On Tue, Feb 28, 2012 at 5:45 AM, Parker, Andrew (UK Filton) <Andrew.Parker2 at baesystems.com> wrote:
> So my issue then I think is that I used the following method, and have all the files that relate to this approach:
>
> http://www.paraview.org/Wiki/index.php?title=Extending_ParaView_at_Com
> pile_Time&oldid=13197
>
> However, after your post I've now just read this:
>
> http://paraview.org/Wiki/Extending_ParaView_at_Compile_Time
>
> Can you advise, I'm not really sure where to go from here.  I think I'm trying to use a deprecated approach.  I want to still add the code at compile time, but I need to use the new method to do so, is there an update of the first link for the > 3.12 method?  Any other advice would be appreciated.
>
> Cheers,
> Andy
>
> -----Original Message-----
> From: Sebastien Jourdain [mailto:sebastien.jourdain at kitware.com]
> Sent: 28 February 2012 13:20
> To: Parker, Andrew (UK Filton)
> Cc: Utkarsh Ayachit; paraview at paraview.org
> Subject: Re: [Paraview] vtkPVMessage.pb.h
>
> *** WARNING ***
>
>  This message has originated outside your organisation,
>  either from an external partner or the Global Internet.
>      Keep this in mind if you answer this message.
>
> Hi Andy,
>
> yes there is a change that may affect you but you might be able to fix it by updating your CMake and the way you define your plugin.
>
> I can not guarantee the issue that you are facing is what I have in mind, but if your proxy create a class that was not defined inside your ParaView plugin but in a library that you build against, then you need to tell ParaView to add that library in the list of VTK objects to process so they can be handle with client/server stream. To do so, we added a new field (CS_KITS) to the plugin declaration. The ParaView Manta plugin is a good example for that.
>
> Here is the striped off Manta plugin declaration for CMake
>
> add_paraview_plugin(
>  MantaView "2.0"
>  SERVER_MANAGER_SOURCES   ....cxx
>  SERVER_MANAGER_XML             ....xml
>  GUI_SOURCES                             .....cxx
>  CS_KITS
>    vtkManta                          <-- List of external VTK library 
> that you are using
> )
>
> Hope that helps, otherwise you will need to send us your XML proxy 
> definition,
>
> Seb
>
> On Tue, Feb 28, 2012 at 5:36 AM, Parker, Andrew (UK Filton) <Andrew.Parker2 at baesystems.com> wrote:
>> Hi,
>>
>> So that worked straight off, nice one thanks for your help. If you need any system specific build info to bug fix this let me know.  However, having built paraview from source to incorporate my readers, which worked perfectly in 3.10, I now get this when trying to use them in 3.14:
>>
>> ERROR: In ParaView/ParaViewCore/ServerImplementation/vtkSIProxy.cxx,
>> line 307 vtkSISourceProxy (0x17c35640): Failed to create MyReader. Aborting for debugging purposes.
>>
>> Before I debug this, is this an obvious bug due to interface changes between the two releases?  Any advice?
>>
>> Cheers,
>> Andy
>>
>> -----Original Message-----
>> From: Utkarsh Ayachit [mailto:utkarsh.ayachit at kitware.com]
>> Sent: 28 February 2012 00:35
>> To: Sebastien Jourdain
>> Cc: Parker, Andrew (UK Filton); paraview at paraview.org
>> Subject: Re: [Paraview] vtkPVMessage.pb.h
>>
>> *** WARNING ***
>>
>>  This message has originated outside your organisation,
>>  either from an external partner or the Global Internet.
>>      Keep this in mind if you answer this message.
>>
>> Andy,
>>
>> check this thread out, it may provide some pointer as to what may be
>> happening:
>> http://www.paraview.org/pipermail/paraview/2012-January/023668.html
>>
>> It maybe an issue with ExecuteProtoC.cmake.in
>>
>> Utkarsh
>>
>> On Mon, Feb 27, 2012 at 8:46 AM, Sebastien Jourdain <sebastien.jourdain at kitware.com> wrote:
>>> Hi Andy,
>>>
>>> so doing a clean clone with the -recursive flag did not solved the issue ?
>>>
>>> What is the system that you are trying to build on ? Are you doing 
>>> any cross-compiling ?
>>>
>>> Seb
>>>
>>> On Mon, Feb 27, 2012 at 11:36 AM, Parker, Andrew (UK Filton) 
>>> <Andrew.Parker2 at baesystems.com> wrote:
>>>> Hi,
>>>>
>>>> So that didn't work....
>>>>
>>>>
>>>> -----Original Message-----
>>>> From: paraview-bounces at paraview.org 
>>>> [mailto:paraview-bounces at paraview.org] On Behalf Of Sebastien 
>>>> Jourdain
>>>> Sent: 27 February 2012 15:54
>>>> To: Parker, Andrew (UK Filton)
>>>> Cc: paraview at paraview.org
>>>> Subject: Re: [Paraview] vtkPVMessage.pb.h
>>>>
>>>> *** WARNING ***
>>>>
>>>>  This message has originated outside your organisation,
>>>>  either from an external partner or the Global Internet.
>>>>      Keep this in mind if you answer this message.
>>>>
>>>> I believe it is a submodule update issue...
>>>>
>>>> try to reclone ParaView or at least make sure when you type "git status" everything is up to date.
>>>>
>>>> Seb
>>>>
>>>> On Mon, Feb 27, 2012 at 9:48 AM, Parker, Andrew (UK Filton) <Andrew.Parker2 at baesystems.com> wrote:
>>>>> Compiling on 64 linux using the 6.4.1 tool-chain...don't think the 
>>>>> patch will work for me seems to be for windows only.. Any thoughts?
>>>>>
>>>>>
>>>>>
>>>>> From: Paul Edwards [mailto:paul.m.edwards at gmail.com]
>>>>> Sent: 27 February 2012 14:41
>>>>> To: Parker, Andrew (UK Filton)
>>>>> Cc: paraview at paraview.org
>>>>> Subject: Re: [Paraview] vtkPVMessage.pb.h
>>>>>
>>>>>
>>>>>
>>>>>                     *** WARNING ***
>>>>>
>>>>>   This message has originated outside your organisation,
>>>>>   either from an external partner or the Global Internet.
>>>>>       Keep this in mind if you answer this message.
>>>>>
>>>>> Take a look at my post from last week.  I had the same problem and 
>>>>> Utkarsh sent a patch.  I assume you are using nmake on windows?
>>>>>
>>>>>
>>>>>
>>>>> Regards,
>>>>> Paul
>>>>>
>>>>> On 27 February 2012 14:36, Parker, Andrew (UK Filton) 
>>>>> <Andrew.Parker2 at baesystems.com> wrote:
>>>>>
>>>>> Hi,
>>>>>
>>>>>
>>>>>
>>>>> Compiling a git checkout of the 3.14.0 tag of paraview, any 
>>>>> thoughts on this compile error?
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> [ 80%] Building CXX object
>>>>> ParaViewCore/ServerImplementation/CMakeFiles/vtkPVServerImplementa
>>>>> t
>>>>> i
>>>>> on
>>>>> .dir/vtkPVSessionBase.cxx.o
>>>>>
>>>>> In file included from
>>>>> repos/paraview/ParaView/ParaViewCore/ServerImplementation/vtkPVSessionBase.cxx:23:0:
>>>>>
>>>>> epos/paraview/ParaView/ParaViewCore/ServerImplementation/vtkSMMessage.h:30:29:
>>>>> fatal error: vtkPVMessage.pb.h: No such file or directory
>>>>>
>>>>> compilation terminated.
>>>>>
>>>>>
>>>>>
>>>>> Cheers,
>>>>> Andy
>>>>>
>>>>>
>>>>> ******************************************************************
>>>>> *
>>>>> * This email and any attachments are confidential to the intended 
>>>>> recipient and may also be privileged. If you are not the intended 
>>>>> recipient please delete it from your system and notify the sender.
>>>>> You should not copy it or use it for any purpose nor disclose or 
>>>>> distribute its contents to any other person.
>>>>> ******************************************************************
>>>>> *
>>>>> *
>>>>>
>>>>>
>>>>> _______________________________________________
>>>>> Powered by www.kitware.com
>>>>>
>>>>> Visit other Kitware open-source projects at 
>>>>> http://www.kitware.com/opensource/opensource.html
>>>>>
>>>>> Please keep messages on-topic and check the ParaView Wiki at:
>>>>> http://paraview.org/Wiki/ParaView
>>>>>
>>>>> Follow this link to subscribe/unsubscribe:
>>>>> http://www.paraview.org/mailman/listinfo/paraview
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> _______________________________________________
>>>>> Powered by www.kitware.com
>>>>>
>>>>> Visit other Kitware open-source projects at 
>>>>> http://www.kitware.com/opensource/opensource.html
>>>>>
>>>>> Please keep messages on-topic and check the ParaView Wiki at:
>>>>> http://paraview.org/Wiki/ParaView
>>>>>
>>>>> Follow this link to subscribe/unsubscribe:
>>>>> http://www.paraview.org/mailman/listinfo/paraview
>>>>>
>>>> _______________________________________________
>>>> Powered by www.kitware.com
>>>>
>>>> Visit other Kitware open-source projects at 
>>>> http://www.kitware.com/opensource/opensource.html
>>>>
>>>> Please keep messages on-topic and check the ParaView Wiki at:
>>>> http://paraview.org/Wiki/ParaView
>>>>
>>>> Follow this link to subscribe/unsubscribe:
>>>> http://www.paraview.org/mailman/listinfo/paraview
>>>>
>>> _______________________________________________
>>> Powered by www.kitware.com
>>>
>>> Visit other Kitware open-source projects at 
>>> http://www.kitware.com/opensource/opensource.html
>>>
>>> Please keep messages on-topic and check the ParaView Wiki at:
>>> http://paraview.org/Wiki/ParaView
>>>
>>> Follow this link to subscribe/unsubscribe:
>>> http://www.paraview.org/mailman/listinfo/paraview
>>
>

_______________________________________________
Powered by www.kitware.com

Visit other Kitware open-source projects at http://www.kitware.com/opensource/opensource.html

Please keep messages on-topic and check the ParaView Wiki at: http://paraview.org/Wiki/ParaView

Follow this link to subscribe/unsubscribe:
http://www.paraview.org/mailman/listinfo/paraview

More information about the ParaView mailing list