[Paraview] ParaView thinks that it does not have a wind blade reader

Fri Aug 31 14:09:40 EDT 2012

Ok, attached is the newest Wind blade reader.  It makes no calls to MPI in
the constructor; only in request data or functions related to the parallel
version of wind blade reader.

I also have the change related to the vtkObjectFactory in there.  Like the
vtkPNrrdReader, the object factory code is in the base (serial) class --
the parallel class just has the standard new macro. As  I said below, I
think the problem with the gradient filter might be related with the
gradient filter I'm using (which is from the master repo from late July).

It reads in serial and parallel. If it works for your tests we'll have to
modify the xml file so that it is enabled for serial.  There are also some
commented (old) code sections; once you guys approve of the class I can
delete the pieces of commented code.

In regards to locations of the classes: I have the vtkPWind* sitting in
VTK/Parallel/MPI and vtkWind* files sitting in VTK/IO/Geometry.  I realize
that the parallel version should be elsewhere; I just placed it in inside
of VTK/Parallel/MPI for testing purposes.

For the parallel version, I added vtkPWindBladeReader.cxx to the
corresponding CMakeLists.txt file (Module_SRCS section) in the
VTK/Parallel/MPI directory.  I also added these lines to the file:
# Now to generate our object factory.
set( vtk_module_overrides
  WindBladeReader
  )

I did something similar for the vtkWindBladeReader for its corresponding
CMakeLists.txt file in VTK/IO/Geometry but did not added any lines related
to vtk_module_overrides.

On Tue, Aug 28, 2012 at 12:42 PM, Sohail Shafii <ssshafii at ucdavis.edu>wrote:

> As far as the gradient filter is concerned: I pick the UVW array in the
> GUI.  It does compute a gradient, but only for one array -- "A-Scale
> turbulence" (all variables are loaded).  So picking a different array in
> the GUI doesn't seem to make a difference as it keeps computing gradient
> for that one input (point data) array.  That's why it can't compute
> vorticity or q-criterion because a-scale turbulence is a 1-component array.
>
> Might be because I'm using an older version of the repo from late July.
>
> Sohail
>
>
> On Tue, Aug 28, 2012 at 11:51 AM, Sohail Shafii <ssshafii at ucdavis.edu>wrote:
>
>> Well I guess it's not a problem in the derived functions if I check to
>> see if MPI is available; if not, call the superclass's version of the
>> virtual function.
>>
>>
>> On Tue, Aug 28, 2012 at 11:32 AM, Sohail Shafii <ssshafii at ucdavis.edu>wrote:
>>
>>> MPI is only used if it's available. It tries to see if there is a
>>> MPIController available.  If not, then the number of ranks is 1, which
>>> means that the parallel class calls the super class's requestdata (super
>>> class is the serial wind blade reader).
>>>
>>> However, the parallel class overrides certain functions to make use of
>>> MPI. So even the parallel instantiation will call the superclass's
>>> requestdata, the overriden functions that are called from that point on
>>> assume that MPI is available...this is a problem when the MPI controller is
>>> not available.
>>>
>>> On another note, it appears that the rectilinear grid that I am reading
>>> (VTK file, structured points I think) is read by the vtkFileSeriesReader,
>>> which makes use of the vtkPDataSetReader class.  Strange that if I use
>>> vtkPDataSetReader myself in C++ code that uses VTK and not paraview,
>>> bounds/cell information is not generated. So I think that ParaView does
>>> something else besides using that reader...hmmm.
>>>
>>>
>>> On Mon, Aug 27, 2012 at 7:32 PM, Andy Bauer <andy.bauer at kitware.com>wrote:
>>>
>>>>
>>>>
>>>> On Mon, Aug 27, 2012 at 6:53 PM, Sohail Shafii <ssshafii at ucdavis.edu>wrote:
>>>>
>>>>> I see...so if MPI is running then it will create a parallel version of
>>>>> the class. Otherwise, it will create the normal reader.
>>>>>
>>>>
>>>> Technically, if ParaView is built with MPI enabled it will create the
>>>> parallel version of the class every time whether or not the client, server,
>>>> or python scripts are actually run with mpiexec, mpirun, or whatever is
>>>> used to start the executable. So you can't rely on MPI being initialized
>>>> and should not initialize it yourself in your class as that can cause
>>>> problems as well. I think that's what you meant but wanted to be as clear
>>>> as possible for the implications for the classes.
>>>>
>>>>
>>>>>
>>>>> As far as the check goes for a multiprocess controller; while it does
>>>>> call the parent request data in the serial case, the inherited parallel
>>>>> class overrides some of the methods.  Which is a problem because it refers
>>>>> to its own file pointer in those methods (it uses MPI_File instead of a
>>>>> FILE*). Hmm.
>>>>>
>>>>> Sohail
>>>>>
>>>>>
>>>>> On Thu, Aug 23, 2012 at 3:20 PM, Andy Bauer <andy.bauer at kitware.com>wrote:
>>>>>
>>>>>> Hi Sohail,
>>>>>>
>>>>>> Sorry for the slow reply but I wanted to make sure how things should
>>>>>> work first and that took a bit to figure out. Anyways, this is closer to
>>>>>> what's needed but the way it is supposed to work in VTK is that we use
>>>>>> vtkObjectFactory to determine which one should be created when
>>>>>> vtkWindBladeReader::New() is called. This is done at build time based on
>>>>>> whether or not VTK is built with MPI. So if VTK and ParaView are built in
>>>>>> parallel then there is code added that creates a vtkPWindBladeReader when
>>>>>> vtkWindBladeReader::New() is called. This is regardless of whether or not
>>>>>> the executable is run with mpi initialized or not. Because of this, the
>>>>>> parallel version of the reader is responsible for checking whether mpi is
>>>>>> initialized, ideally by doing
>>>>>> vtkMultiProcessController::GetGlobalController()->IsA("vtkMPIController")
>>>>>> is true, and if it isn't it should just call the parent class's methods for
>>>>>> reading in the files. You may want to look at vtkPNrrdReader and the
>>>>>> CMakeLists.txt file in that directory to see how they did things. Note
>>>>>> though that if it's a single process running that it doesn't do any MPI
>>>>>> calls even in the parallel version so your code will be slightly different
>>>>>> than theirs.
>>>>>>
>>>>>> As for other parts of the email below:
>>>>>>
>>>>>> 1) yes, please keep cc'ing the list as there are some details in here
>>>>>> that will be helpful to other people trying to implement their own parallel
>>>>>> readers or filters
>>>>>>
>>>>>> 2) I'm not sure what's going on with the gradient filter but am
>>>>>> guessing that it has to do with the multiblock data set and that there
>>>>>> probably isn't that same array in each block. But that's just a guess. Did
>>>>>> you try extracting the "air" block and do the vorticity and/or q criterion
>>>>>> computation on that?
>>>>>>
>>>>>> 3) vtkSMReaderFactory may be the class you're looking for to
>>>>>> determine which reader is getting used. ParaViewReaders.xml has a list of
>>>>>> readers that it will try to read in a file.
>>>>>>
>>>>>> Andy
>>>>>>
>>>>>>
>>>>>> On Tue, Aug 21, 2012 at 7:11 PM, Sohail Shafii <ssshafii at ucdavis.edu>wrote:
>>>>>>
>>>>>>>  <sent via another e-mail address; yahoo prevents me from uploading
>>>>>>> stuff because it's stupid>
>>>>>>>
>>>>>>> Here's the first version.  Do you want me to keep ccing the list?
>>>>>>> Not sure if that's necessary at this point because this is related to the
>>>>>>> development of ParaView and not help.
>>>>>>>
>>>>>>> I've run it with an older version of the master, and it seems to
>>>>>>> read in a test .wind file just fine.  For now I had to store the
>>>>>>> vtkPWindBladeReader* files into VTK/Parallel/MPI since I don't have
>>>>>>> VTK/IO/MPIParallel module yet.  Now when I run the gradient filter after
>>>>>>> the field, the gradient filter thinks that the input array does not have
>>>>>>> the appropriate number of components for Q criterion or vorticity...but it
>>>>>>> should (UVW does have three components per tuple).  Might be my outdated
>>>>>>> copy of the git repo.  Haven't debugged that gradient code yet.
>>>>>>>
>>>>>>> *I was wondering if this is the type of code that you want?  Or
>>>>>>> should the classes be designed differently?*  Also, I have only run
>>>>>>> it parallel because if I try to instantiate it inside of the python shell
>>>>>>> in serial it tries to run RequestInformation (which assumes that the file
>>>>>>> path exists but does not).  It's a work-in-progress but it's a start.
>>>>>>>
>>>>>>> A random question: if ParaView reads a file, where would I put a
>>>>>>> breakpoint that tells me which reader it ends up picking??  I have some
>>>>>>> separate VTK code that reads in a rectilinear grid, but does not generate
>>>>>>> cell/bounds information. ParaView does generate information about the
>>>>>>> bounds though.
>>>>>>>
>>>>>>> Sohail
>>>>>>>
>>>>>>>   ------------------------------
>>>>>>> *From:* David E DeMarle <dave.demarle at kitware.com>
>>>>>>> *To:* Sohail Shafii <sohailshafii at yahoo.com>
>>>>>>> *Cc:* Andy Bauer <andy.bauer at kitware.com>; "migichen at gmail.com" <
>>>>>>> migichen at gmail.com>; "paraview at paraview.org" <paraview at paraview.org>;
>>>>>>> "Woodring, Jonathan L" <woodring at lanl.gov>
>>>>>>> *Sent:* Friday, July 20, 2012 10:02 AM
>>>>>>> *Subject:* Re: [Paraview] ParaView thinks that it does not have a
>>>>>>> wind blade reader
>>>>>>>
>>>>>>> Thanks.
>>>>>>>
>>>>>>> In today's git master it now sits in
>>>>>>> VTK/IO/Parallel/vtkWindbladeReader.
>>>>>>>
>>>>>>> The serial version should go in VTK/IO/Geometry.
>>>>>>>
>>>>>>> The MPI version should go in a new module VTK/IO/MPIParallel.
>>>>>>> (VTK/IO/Parallel depends only on vtkSocketController now and should
>>>>>>> not depend on vtkMPIController).
>>>>>>>
>>>>>>> Finally when that is done we can remove the flag in paraview's xml
>>>>>>> that prevents it from being used in serial.
>>>>>>>
>>>>>>> David E DeMarle
>>>>>>> Kitware, Inc.
>>>>>>> R&D Engineer
>>>>>>> 21 Corporate Drive
>>>>>>> Clifton Park, NY 12065-8662
>>>>>>> Phone: 518-881-4909
>>>>>>>
>>>>>>>
>>>>>>> On Thu, Jul 19, 2012 at 7:08 PM, Sohail Shafii <
>>>>>>> sohailshafii at yahoo.com> wrote:
>>>>>>> > Well it seems like #1 and #2 can be solved by writing a new
>>>>>>> parallel wind
>>>>>>> > blade reader class. I had similar experience by creating
>>>>>>> distributed
>>>>>>> > versions of class that I created in other vtk directories. The
>>>>>>> normal wind
>>>>>>> > blade reader would have no parallel calls, which would address #1.
>>>>>>> >
>>>>>>> > What I find interesting is that in your directories, the wind
>>>>>>> blade reader
>>>>>>> > is located in VTK/IO/Parallel. For the ParaView snapshot that I
>>>>>>> downloaded,
>>>>>>> > as well as the 3.14 source, it's still in VTK/Parallel.  No
>>>>>>> Parallel folder
>>>>>>> > in VTK/IO. Is this a recent change?
>>>>>>> >
>>>>>>> > So maybe the ideal folder layout would be:
>>>>>>> >
>>>>>>> > VTK/IO/WindBladeReader.*
>>>>>>> >
>>>>>>> > VTK/IO/Parallel/DistributedWindBladeReader.*
>>>>>>> >
>>>>>>> > I can make changes to the WindBladeReader to remove the MPI-IO
>>>>>>> calls and
>>>>>>> > make a distributed wind blade reader class in case you want to add
>>>>>>> them to
>>>>>>> > the repository. The one template I have for the parallel/serial
>>>>>>> split is the
>>>>>>> > vtkStreamTracer and its distributed counterparts so I can use
>>>>>>> those as a
>>>>>>> > guide.  If you have better recommendations please let me know.
>>>>>>> >
>>>>>>> > Sohail
>>>>>>> >
>>>>>>> > ________________________________
>>>>>>> > From: David E DeMarle <dave.demarle at kitware.com>
>>>>>>> > To: Sohail Shafii <sohailshafii at yahoo.com>
>>>>>>> > Cc: Andy Bauer <andy.bauer at kitware.com>; "migichen at gmail.com"
>>>>>>> > <migichen at gmail.com>; "paraview at paraview.org" <
>>>>>>> paraview at paraview.org>;
>>>>>>> > "Woodring, Jonathan L" <woodring at lanl.gov>
>>>>>>> > Sent: Thursday, July 19, 2012 3:20 PM
>>>>>>> >
>>>>>>> > Subject: Re: [Paraview] ParaView thinks that it does not have a
>>>>>>> wind blade
>>>>>>> > reader
>>>>>>> >
>>>>>>> > Two issues need to be fixed.
>>>>>>> > 1) that behavior in 3.14 is there because of this fix which we had
>>>>>>> to
>>>>>>> > rush in just before the 3.14 release.
>>>>>>> >
>>>>>>> > Committer: Utkarsh Ayachit <utkarsh.ayachit at kitware.com>
>>>>>>> 2012-02-08
>>>>>>> > 17:12:18
>>>>>>> > Parent: e401d569f6e54c49c3497852463f6b13a01da8b6 (Update version
>>>>>>> after
>>>>>>> > 3.14.0-RC1 tag.)
>>>>>>> > Child:  99fdb1aeb5997c29b43393f45a478c4b53a23109 (Merge topic
>>>>>>> > 'fix_windblade_segfault')
>>>>>>> > Branches: many (31)
>>>>>>> > Follows: v3.14.0-RC1
>>>>>>> > Precedes: v3.14.0-RC2
>>>>>>> >
>>>>>>> >    Fix segfault with ParaView built with MPI when opening *.vtr
>>>>>>> files.
>>>>>>> >
>>>>>>> >    The problem was that vtkWindBlade reader was getting created to
>>>>>>> test
>>>>>>> >    "CanReadFile" and that would cause segfault unless MPI was
>>>>>>> initialized.
>>>>>>> >
>>>>>>> >    Solved the problem by added support to vtkSMReaderFactory to
>>>>>>> respect the
>>>>>>> >    ProcessSupport flag on SourceProxy and change windblade reader
>>>>>>> XML
>>>>>>> > to say that
>>>>>>> >    it only works in parallel.
>>>>>>> >
>>>>>>> > In other words, Windblade reader's Constructor should not take it
>>>>>>> upon
>>>>>>> > itself to initialize MPI.
>>>>>>> >
>>>>>>> > Once that is fixed, we get to issue 2 before paraview 4.0
>>>>>>> >
>>>>>>> > 2) VTK's new modularization has the rule that no module can behave
>>>>>>> > differently with parallel (or most other cmake config options)
>>>>>>> turned
>>>>>>> > configured on or off. This is so because it makes it very hard to
>>>>>>> > package VTK when the libs behave differently in different
>>>>>>> situations.
>>>>>>> >
>>>>>>> > Ie, we can't have any more
>>>>>>> > #ifdef VTK_USE_MPI
>>>>>>> > do something
>>>>>>> > #else
>>>>>>> > do something different
>>>>>>> > #endif
>>>>>>> > in VTK classes.
>>>>>>> >
>>>>>>> > Now if we want a class to behave differently when MPI is turned on
>>>>>>> or
>>>>>>> > off we have to make a serial only version in a non MPI dependent
>>>>>>> > module and a subclass of that in an MPI dependent module.
>>>>>>> >
>>>>>>> > David E DeMarle
>>>>>>> > Kitware, Inc.
>>>>>>> > R&D Engineer
>>>>>>> > 21 Corporate Drive
>>>>>>> > Clifton Park, NY 12065-8662
>>>>>>> > Phone: 518-881-4909
>>>>>>> >
>>>>>>> >
>>>>>>> > On Thu, Jul 19, 2012 at 3:52 PM, Sohail Shafii <
>>>>>>> sohailshafii at yahoo.com>
>>>>>>> > wrote:
>>>>>>> >> When running serially, vtkSMReaderFactory::CanReadFile sees that
>>>>>>> the
>>>>>>> >> session
>>>>>>> >> has a single process.  As such, on line 660 it realizes that the
>>>>>>> source
>>>>>>> >> proxy's process support (in this case the source is a
>>>>>>> vtkWindBladeReader
>>>>>>> >> proxy) is multiple processes, which causes a return of "false"
>>>>>>> from that
>>>>>>> >> function.  This makes ParaView think that the wind blade reader
>>>>>>> can't read
>>>>>>> >> a
>>>>>>> >> .wind file in serial.  According to Andy, the reader works find in
>>>>>>> >> parallel.
>>>>>>> >>
>>>>>>> >> I assume that a fix for this is pretty trivial? It never did this
>>>>>>> before
>>>>>>> >> in
>>>>>>> >> previous versions of ParaView and I think that the wind blade
>>>>>>> reader code
>>>>>>> >> has remained mostly the same. Andy mentioned some details in
>>>>>>> person when
>>>>>>> >> he
>>>>>>> >> was talking with Jon but at that time I didn't know as much as I
>>>>>>> do now.
>>>>>>> >> There is a mention below about enabling the filter in serial and
>>>>>>> parallel
>>>>>>> >> --
>>>>>>> >> is this done in a xml file?
>>>>>>> >>
>>>>>>> >> Sohail
>>>>>>> >>
>>>>>>> >> ________________________________
>>>>>>> >> From: David E DeMarle <dave.demarle at kitware.com>
>>>>>>> >> To: Sohail Shafii <sohailshafii at yahoo.com>
>>>>>>> >> Cc: Andy Bauer <andy.bauer at kitware.com>; "migichen at gmail.com"
>>>>>>> >> <migichen at gmail.com>; "paraview at paraview.org" <
>>>>>>> paraview at paraview.org>;
>>>>>>> >> "Woodring, Jonathan L" <woodring at lanl.gov>
>>>>>>> >> Sent: Tuesday, July 17, 2012 7:00 PM
>>>>>>> >>
>>>>>>> >> Subject: Re: [Paraview] ParaView thinks that it does not have a
>>>>>>> wind blade
>>>>>>> >> reader
>>>>>>> >>
>>>>>>> >> Each file that has an association with that file extension, made
>>>>>>> via the
>>>>>>> >> XML, has its CanReadFile method called. Put a breakpoint there to
>>>>>>> >> determine
>>>>>>> >> if ParaView even knows about that reader.
>>>>>>> >>
>>>>>>> >> On Tuesday, July 17, 2012, Sohail Shafii wrote:
>>>>>>> >>
>>>>>>> >> Sorry, but I meant to ask a different question.  Here's what Andy
>>>>>>> said
>>>>>>> >> before, which relates to my concern:
>>>>>>> >> ">
>>>>>>> >>> I went through the code and it jogged my memory about previous
>>>>>>> problems
>>>>>>> >>> with
>>>>>>> >>> it. It had an explicit MPI call in the constructor that would
>>>>>>> cause
>>>>>>> >>> problems
>>>>>>> >>> when paraview wasn't getting built with MPI. Any time a user
>>>>>>> tried to
>>>>>>> >>> open
>>>>>>> >>> an unknown file it would try to create a windblade reader to see
>>>>>>> if the
>>>>>>> >>> reader could handle the file and this would cause a crash. If
>>>>>>> you launch
>>>>>>> >>> a
>>>>>>> >>> separate pvserver the wind blade reader will be available in the
>>>>>>> gui."
>>>>>>> >>
>>>>>>> >> What I meant was; which ParaView class "creates" or "tests" a
>>>>>>> reader to
>>>>>>> >> see
>>>>>>> >> if it can handle a file? The test code you specified has a
>>>>>>> predefined data
>>>>>>> >> set that is loaded in, and I think is more of an example to your
>>>>>>> average
>>>>>>> >> user. Correct me if I'm wrong.
>>>>>>> >>
>>>>>>> >> So basically ParaView will recognize the file extension, tries to
>>>>>>> load it,
>>>>>>> >> crashes somewhere, then asks you specify the data format from a
>>>>>>> dialog.
>>>>>>> >> I'm
>>>>>>> >> trying to figure out where it crashes so that I can see how that
>>>>>>> relates
>>>>>>> >> to
>>>>>>> >> the wind blade reader class and any MPI calls that are in there.
>>>>>>> >>
>>>>>>> >> Sohail
>>>>>>> >>
>>>>>>> >> Subject: Re: [Paraview] ParaView thinks that it does not have a
>>>>>>> wind blade
>>>>>>> >> reader
>>>>>>> >>
>>>>>>> >> kargad:ParaView demarle$ find . -name "*WindBlade*" -print
>>>>>>> >> ---> ./VTK/IO/Parallel/Testing/Cxx/TestWindBladeReader.cxx
>>>>>>> >> ./VTK/IO/Parallel/vtkWindBladeReader.cxx
>>>>>>> >> ./VTK/IO/Parallel/vtkWindBladeReader.h
>>>>>>> >>
>>>>>>> >> David E DeMarle
>>>>>>> >> Kitware, Inc.
>>>>>>> >> R&D Engineer
>>>>>>> >> 21 Corporate Drive
>>>>>>> >> Clifton Park, NY 12065-8662
>>>>>>> >> Phone: 518-881-4909
>>>>>>> >>
>>>>>>> >>
>>>>>>> >> On Tue, Jul 17, 2012 at 2:09 PM, Sohail Shafii <
>>>>>>> sohailshafii at yahoo.com>
>>>>>>> >> wrote:
>>>>>>> >>> What is the class that is responsible for testing to reader to
>>>>>>> see if it
>>>>>>> >>> can
>>>>>>> >>> open the .wind file?
>>>>>>> >>>
>>>>>>> >>> Sohail
>>>>>>> >>>
>>>>>>> >>> ________________________________
>>>>>>> >>> From: Andy Bauer <andy.bauer at kitware.com>
>>>>>>> >>> To: Sohail Shafii <sohailshafii at yahoo.com>
>>>>>>> >>> Cc: "Woodring, Jonathan L" <woodring at lanl.gov>; Sebastien
>>>>>>> Jourdain
>>>>>>> >>> <sebastien.jourdain at kitware.com>; "migichen at gmail.com"
>>>>>>> >>> <migichen at gmail.com>;
>>>>>>> >>> "paraview at paraview.org" <paraview at paraview.org>
>>>>>>> >>> Sent: Wednesday, July 11, 2012 10:53 AM
>>>>>>> >>>
>>>>>>> >>> Subject: Re: [Paraview] ParaView thinks that it does not have a
>>>>>>> wind
>>>>>>> >>> blade
>>>>>>> >>> reader
>>>>>>> >>>
>>>>>>> >>> I was reluctant to enable the reader in serial (i.e. not using
>>>>>>> MPI IO
>>>>>>> >>> which
>>>>>>> >>> I think is getting done by default with the parallel build)
>>>>>>> because of
>>>>>>> >>> the
>>>>>>> >>> following warnings that I got:
>>>>>>> >>>
>>>>>>> >>> Warning: In /home/acbauer/CODE/ParaView/
>>>>>>> >>> ParaView/VTK/IO/Parallel/vtkWindBladeReader.cxx, line 942
>>>>>>> >>> vtkWindBladeReader (0x3a0c800): WindBladeReader error reading
>>>>>>> file:
>>>>>>> >>>
>>>>>>> /home/acbauer/DATA/VTKLargeData/Data/WindBladeReader/test1_topo.wind
>>>>>>> >>> Premature EOF while reading block of data. Expected 896000 but
>>>>>>> got 0
>>>>>>> >>>
>>>>>>> >>> I just assumed that it was getting bad results so I didn't check
>>>>>>> the
>>>>>>> >>> serial
>>>>>>> >>> output with the parallel output. In either case the code should
>>>>>>> be
>>>>>>> >>> changed
>>>>>>> >>> before enabling it in serial so that it reads the files
>>>>>>> correctly and
>>>>>>> >>> doesn't produce any warning messages.
>>>>>>> >>>
>>>>>>> >>> Andy
>>>>>>> >>>
>>>>>>> >>> On Wed, Jul 11, 2012 at 12:04 PM, Sohail Shafii <
>>>>>>> sohailshafii at yahoo.com>
>>>>>>> >>> wrote:
>>>>>>> >>>
>>>>>>> >>> I'm not aware of any option to build/link against mpi-io.  This
>>>>>>> is just a
>>>>>>> >>> standard build with mpi support that suffers from this issue.
>>>>>>> >>>
>>>>>>> >>> The ParaView website's builds also have the same bug.
>>>>>>> >>>
>>>>>>> >>> ________________________________
>>>>>>> >>> From: "Woodring, Jonathan L" <woodring at lanl.gov>
>>>>>>> >>> To: Sohail Shafii <sohailshafii at yahoo.com>; Andy Bauer
>>>>>>> >>> <andy.bauer at kitware.com>; Sebastien Jourdain
>>>>>>> >>> <sebastien.jourdain at kitware.com>
>>>>>>> >>> Cc: "migichen at gmail.com" <migichen at gmail.com>; "
>>>>>>> paraview at paraview.org"
>>>>>>> >>> <paraview at paraview.org>
>>>>>>> >>> Sent: Tuesday, July 10, 2012 10:06 AM
>>>>>>> >>>
>>>>>>> >>> Subject: Re: [Paraview] ParaView thinks that it does not have a
>>>>>>> wind
>>>>>>> >>> blade
>>>>>>> >>> reader
>>>>>>> >>>
>>>>>>> >>> I added the MPI calls to be in sync with what was being added in
>>>>>>> the
>>>>>>> >>> simulation.
>>>>>>> >>>
>>>>>>> >>> In the SuperComputing demo last year, we updated both the HiGrad
>>>>>>> FireTec
>>>>>>> >>> to
>>>>>>> >>> use MPI-IO and likewise ParaView to do the same thing.
>>>>>>> >>>
>>>>>>> >>> It w
>>>>>>> >>
>>>>>>> >>
>>>>>>> >>
>>>>>>> >> --
>>>>>>> >> David E DeMarle
>>>>>>> >> Kitware, Inc.
>>>>>>> >> R&D Engineer
>>>>>>> >> 21 Corporate Drive
>>>>>>> >> Clifton Park, NY 12065-8662
>>>>>>> >> Phone: 518-881-4909
>>>>>>> >>
>>>>>>> >>
>>>>>>> >
>>>>>>> >
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>
>>>>>
>>>>
>>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.paraview.org/pipermail/paraview/attachments/20120831/fd963270/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: vtkPWindBladeReader.cxx
Type: application/octet-stream
Size: 21817 bytes
Desc: not available
URL: <http://www.paraview.org/pipermail/paraview/attachments/20120831/fd963270/attachment-0002.obj>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: vtkPWindBladeReader.h
Type: text/x-chdr
Size: 2858 bytes
Desc: not available
URL: <http://www.paraview.org/pipermail/paraview/attachments/20120831/fd963270/attachment-0002.h>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: vtkWindBladeReader.cxx
Type: application/octet-stream
Size: 72668 bytes
Desc: not available
URL: <http://www.paraview.org/pipermail/paraview/attachments/20120831/fd963270/attachment-0003.obj>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: vtkWindBladeReader.h
Type: text/x-chdr
Size: 10043 bytes
Desc: not available
URL: <http://www.paraview.org/pipermail/paraview/attachments/20120831/fd963270/attachment-0003.h>