[Paraview] Paraview with SGI - MPT

Ganesh Vijayakumar ganesh.iitm at gmail.com
Wed Aug 8 16:08:29 EDT 2012


Thanks Burlen. It turned out that VTK_USE_X was still ON. It worked fine
otherwise. I'm now able to execute a script file with pvpython offscreen.

ganesh

On Tue, Aug 7, 2012 at 1:49 PM, Burlen Loring <bloring at lbl.gov> wrote:

> **
> Hi Ganesh,
>
> your error log indicates that x11 support is being referred to but not
> provided, you don't need X11 for the pvserver with OS Mesa. I'm wondering
> if you had attempted to modify the cmake cache for an existing build?
> perhaps starting over fresh would help? by the way the script below was
> used to build paraview server version 3.10, 3.12 and 3.14 on an sgi uv 1000
> with osmesa 7.5.1. I would expect it would make a good starting point for
> building the server with osmesa your system.
>
> Burlen
>
>
> On 08/06/2012 12:46 PM, Ganesh Vijayakumar wrote:
>
> Dear All,
>
>    I tried this. It worked all right when I had the QT interface built.
> But now I want to use Paraview in the off screen mode with pvbatch. I've
> attached a part of the error log. I've read through this
>
>  http://paraview.org/Wiki/ParaView_And_Mesa_3D
>
>  I'm using option 2 - i.e offscreen mesa only. So I made sure
>
>   OPENGL_gl_LIBRARY = <empty>  -- *ENSURE THAT THIS IS EMPTY*.
>
>
>  The interesting part is that if I delete that line in my paraview
> compile script, the compilation goes through. Any ideas?
>
>  ganesh
>
>
>  On Fri, Jul 27, 2012 at 12:59 PM, Burlen Loring <bloring at lbl.gov> wrote:
>
>>  Hi Ganesh,
>>
>> Here are the settings that worked on an SGI Altix UV. You may want to add
>> "export MPI_TYPE_MAX=1000000"" to your run script as well.
>>
>> Burlen
>>
>> #!/bin/bash
>> BUILD_TYPE=Release
>>
>> CC_PATH=/opt/intel/Compiler/11.1/038
>> MPI_PATH=/opt/sgi/mpt/mpt-2.04
>> MESA_PATH=$OSMESA_ROOT
>>
>> PY_ROOT=/sw/analysis/python/2.7.1/sles11.1_intel11.1
>> PY_EXEC=$PY_ROOT/bin/python
>> PY_INCL=$PY_ROOT/include/python2.7
>> PY_LIB=$PY_ROOT/lib/libpython2.7.so
>>
>> cmake \
>>   -DCMAKE_C_COMPILER=$CC_PATH/bin/intel64/icc \
>>   -DCMAKE_CXX_COMPILER=$CC_PATH/bin/intel64/icpc \
>>   -DCMAKE_LINKER=$CC_PATH/bin/intel64/icpc \
>>   -DCMAKE_CXX_FLAGS="-Wno-deprecated" \
>>   -DBUILD_TESTING=ON \
>>   -DBUILD_SHARED_LIBS=ON \
>>   -DCMAKE_BUILD_TYPE=$BUILD_TYPE \
>>   -DCMAKE_INSTALL_PREFIX=$SW_BLDDIR \
>>   -DPARAVIEW_ENABLE_PYTHON=ON \
>>   -DPYTHON_EXECUTABLE=$PY_EXEC \
>>   -DPYTHON_INCLUDE_DIR=$PY_INCL\
>>   -DPYTHON_LIBRARY=$PY_LIB \
>>   -DPARAVIEW_INSTALL_DEVELOPMENT=OFF \
>>   -DPARAVIEW_USE_MPI=ON \
>>   -DMPI_INCLUDE_PATH=$MPI_PATH/include \
>>   -DMPI_LIBRARY=$MPI_PATH/lib/libmpi.so \
>>   -DPARAVIEW_BUILD_QT_GUI=OFF \
>>   -DVTK_USE_X=OFF \
>>   -DVTK_OPENGL_HAS_OSMESA=ON \
>>   -DOPENGL_INCLUDE_DIR=$MESA_PATH/include \
>>   -DOPENGL_gl_LIBRARY="" \
>>   -DOPENGL_glu_LIBRARY=$MESA_PATH/lib64/libGLU.so \
>>   -DOPENGL_xmesa_INCLUDE_DIR=$MESA_PATH/include \
>>   -DOSMESA_INCLUDE_DIR=$MESA_PATH/include \
>>   -DOSMESA_LIBRARY=$MESA_PATH/lib64/libOSMesa.so \
>>   -DVTK_USE_BOOST=ON \
>>
>> -DBOOST_ROOT=/sw/analysis/paraview/3.14.0/sles11.1_intel11.1.038/boost_1_46_1
>> \
>>   -DPARAVIEW_ENABLE_PYTHON=ON \
>>   -DPARAVIEW_BUILD_PLUGIN=EyeDomeLighting \
>>   -DPARAVIEW_USE_VISITBRIDGE=ON \
>>   -DVISIT_BUILD_READER_CGNS=OFF \
>>   -DVISIT_BUILD_READER_Silo=OFF \
>>   $PV_SOURCES
>>
>>
>>
>>
>>
>> On 07/27/2012 09:12 AM, Ganesh Vijayakumar wrote:
>>
>>  hi!
>>
>>    I want to get Paraview installed on an SGI system with MPT. I ran
>> into this thread.
>>
>>
>> http://article.gmane.org/gmane.comp.science.paraview.user/11954/match=sgi+mpt
>>
>>  Could some one please tell me where I can change the settings to link
>> using "-lmpi" and also the the compile flags that Pratik talks about here
>>
>>  http://www.paraview.org/pipermail/paraview/2011-April/021218.html
>>
>>  A grep on MPI_COMPILE_FLAGS gives me this
>>
>>
>> guv106 at tg-login1:/brashear/guv106/OpenFOAM/ThirdParty-2.1.x/ParaView-3.12.0>
>> grep -r MPI_COMPILE_FLAGS *
>> Plugins/SQToolkit/script/config/config-svtk-longhorn-icc.sh:
>>  -DMPI_COMPILE_FLAGS:STRING=\
>>
>>  ganesh
>>
>>
>> _______________________________________________
>> Powered by www.kitware.com
>>
>> Visit other Kitware open-source projects at http://www.kitware.com/opensource/opensource.html
>>
>> Please keep messages on-topic and check the ParaView Wiki at: http://paraview.org/Wiki/ParaView
>>
>> Follow this link to subscribe/unsubscribe:http://www.paraview.org/mailman/listinfo/paraview
>>
>>
>>
>
>
>  --
> ganesh
>
>
> _______________________________________________
> Powered by www.kitware.com
>
> Visit other Kitware open-source projects at http://www.kitware.com/opensource/opensource.html
>
> Please keep messages on-topic and check the ParaView Wiki at: http://paraview.org/Wiki/ParaView
>
> Follow this link to subscribe/unsubscribe:http://www.paraview.org/mailman/listinfo/paraview
>
>
>


-- 
ganesh
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.paraview.org/pipermail/paraview/attachments/20120808/0b8595ff/attachment-0001.htm>


More information about the ParaView mailing list