[Paraview] Paraview with SGI - MPT

[Burlen Loring]

Hi Ganesh,

your error log indicates that x11 support is being referred to but not 
provided, you don't need X11 for the pvserver with OS Mesa. I'm 
wondering if you had attempted to modify the cmake cache for an existing 
build? perhaps starting over fresh would help? by the way the script 
below was used to build paraview server version 3.10, 3.12 and 3.14 on 
an sgi uv 1000 with osmesa 7.5.1. I would expect it would make a good 
starting point for building the server with osmesa your system.

Burlen

On 08/06/2012 12:46 PM, Ganesh Vijayakumar wrote:
> Dear All,
>
>   I tried this. It worked all right when I had the QT interface built. 
> But now I want to use Paraview in the off screen mode with pvbatch. 
> I've attached a part of the error log. I've read through this
>
> http://paraview.org/Wiki/ParaView_And_Mesa_3D
>
> I'm using option 2 - i.e offscreen mesa only. So I made sure
>
>   OPENGL_gl_LIBRARY =<empty>   -- *ENSURE THAT THIS IS EMPTY*.
>
> The interesting part is that if I delete that line in my paraview 
> compile script, the compilation goes through. Any ideas?
>
> ganesh
>
>
> On Fri, Jul 27, 2012 at 12:59 PM, Burlen Loring <bloring at lbl.gov 
> <mailto:bloring at lbl.gov>> wrote:
>
>     Hi Ganesh,
>
>     Here are the settings that worked on an SGI Altix UV. You may want
>     to add "export MPI_TYPE_MAX=1000000"" to your run script as well.
>
>     Burlen
>
>     #!/bin/bash
>     BUILD_TYPE=Release
>
>     CC_PATH=/opt/intel/Compiler/11.1/038
>     MPI_PATH=/opt/sgi/mpt/mpt-2.04
>     MESA_PATH=$OSMESA_ROOT
>
>     PY_ROOT=/sw/analysis/python/2.7.1/sles11.1_intel11.1
>     PY_EXEC=$PY_ROOT/bin/python
>     PY_INCL=$PY_ROOT/include/python2.7
>     PY_LIB=$PY_ROOT/lib/libpython2.7.so <http://libpython2.7.so>
>
>     cmake \
>       -DCMAKE_C_COMPILER=$CC_PATH/bin/intel64/icc \
>       -DCMAKE_CXX_COMPILER=$CC_PATH/bin/intel64/icpc \
>       -DCMAKE_LINKER=$CC_PATH/bin/intel64/icpc \
>       -DCMAKE_CXX_FLAGS="-Wno-deprecated" \
>       -DBUILD_TESTING=ON \
>       -DBUILD_SHARED_LIBS=ON \
>       -DCMAKE_BUILD_TYPE=$BUILD_TYPE \
>       -DCMAKE_INSTALL_PREFIX=$SW_BLDDIR \
>       -DPARAVIEW_ENABLE_PYTHON=ON \
>       -DPYTHON_EXECUTABLE=$PY_EXEC \
>       -DPYTHON_INCLUDE_DIR=$PY_INCL\
>       -DPYTHON_LIBRARY=$PY_LIB \
>       -DPARAVIEW_INSTALL_DEVELOPMENT=OFF \
>       -DPARAVIEW_USE_MPI=ON \
>       -DMPI_INCLUDE_PATH=$MPI_PATH/include \
>       -DMPI_LIBRARY=$MPI_PATH/lib/libmpi.so \
>       -DPARAVIEW_BUILD_QT_GUI=OFF \
>       -DVTK_USE_X=OFF \
>       -DVTK_OPENGL_HAS_OSMESA=ON \
>       -DOPENGL_INCLUDE_DIR=$MESA_PATH/include \
>       -DOPENGL_gl_LIBRARY="" \
>       -DOPENGL_glu_LIBRARY=$MESA_PATH/lib64/libGLU.so \
>       -DOPENGL_xmesa_INCLUDE_DIR=$MESA_PATH/include \
>       -DOSMESA_INCLUDE_DIR=$MESA_PATH/include \
>       -DOSMESA_LIBRARY=$MESA_PATH/lib64/libOSMesa.so \
>       -DVTK_USE_BOOST=ON \
>      
>     -DBOOST_ROOT=/sw/analysis/paraview/3.14.0/sles11.1_intel11.1.038/boost_1_46_1
>     \
>       -DPARAVIEW_ENABLE_PYTHON=ON \
>       -DPARAVIEW_BUILD_PLUGIN=EyeDomeLighting \
>       -DPARAVIEW_USE_VISITBRIDGE=ON \
>       -DVISIT_BUILD_READER_CGNS=OFF \
>       -DVISIT_BUILD_READER_Silo=OFF \
>       $PV_SOURCES
>
>
>
>
>
>     On 07/27/2012 09:12 AM, Ganesh Vijayakumar wrote:
>>     hi!
>>
>>       I want to get Paraview installed on an SGI system with MPT. I
>>     ran into this thread.
>>
>>     http://article.gmane.org/gmane.comp.science.paraview.user/11954/match=sgi+mpt
>>
>>     Could some one please tell me where I can change the settings to
>>     link using "-lmpi" and also the the compile flags that Pratik
>>     talks about here
>>
>>     http://www.paraview.org/pipermail/paraview/2011-April/021218.html
>>
>>     A grep on MPI_COMPILE_FLAGS gives me this
>>
>>     guv106 at tg-login1:/brashear/guv106/OpenFOAM/ThirdParty-2.1.x/ParaView-3.12.0
>>     <mailto:guv106 at tg-login1:/brashear/guv106/OpenFOAM/ThirdParty-2.1.x/ParaView-3.12.0>>
>>     grep -r MPI_COMPILE_FLAGS *
>>     Plugins/SQToolkit/script/config/config-svtk-longhorn-icc.sh:  
>>      -DMPI_COMPILE_FLAGS:STRING=\
>>
>>     ganesh
>>
>>
>>     _______________________________________________
>>     Powered bywww.kitware.com  <http://www.kitware.com>
>>
>>     Visit other Kitware open-source projects athttp://www.kitware.com/opensource/opensource.html
>>
>>     Please keep messages on-topic and check the ParaView Wiki at:http://paraview.org/Wiki/ParaView
>>
>>     Follow this link to subscribe/unsubscribe:
>>     http://www.paraview.org/mailman/listinfo/paraview
>
>
>
>
> -- 
> ganesh
>
>
> _______________________________________________
> Powered by www.kitware.com
>
> Visit other Kitware open-source projects at http://www.kitware.com/opensource/opensource.html
>
> Please keep messages on-topic and check the ParaView Wiki at: http://paraview.org/Wiki/ParaView
>
> Follow this link to subscribe/unsubscribe:
> http://www.paraview.org/mailman/listinfo/paraview

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.paraview.org/pipermail/paraview/attachments/20120807/0072ef68/attachment.htm>