[Paraview] Redistributable ParaView OS X Package is unusable.

Scott, W Alan wascott at sandia.gov
Tue May 24 17:22:47 EDT 2011 

Sorry Michael - we are both in meetings, and so keep having large gaps in our day.

I did push a copy of my bundle to Dave's machines, and they seem to work.  Thus, I need to go back to my machine at home and try to figure out what is going on.  Maybe my machine has a different setup of some type?

You may want to do the same as I did - push the bundle to Dave, and have him try to run it on his machine.  That way you will know if it is the machine or bundle...  Sorry I don't have better ideas...

Alan

From: paraview-bounces at paraview.org [mailto:paraview-bounces at paraview.org] On Behalf Of Michael Jackson
Sent: Tuesday, May 24, 2011 2:30 PM
To: David Partyka
Cc: ParaView
Subject: Re: [Paraview] Redistributable ParaView OS X Package is unusable.

Just tried on a clean checkout of source with cmake 2.8.4 and have the same result. Application has no real menu bar. Just a single menu that says "NewApplication".
   Still no idea what is going wrong. This was with Qt 4.7.2 self compiled.
-----
Mike Jackson                     www.bluequartz.net<http://www.bluequartz.net>
Principal Software Engineer       mike.jackson at bluequartz.net<mailto:mike.jackson at bluequartz.net>
BlueQuartz Software               Dayton, Ohio
Sent from my mobile device.

On May 24, 2011, at 14:41, David Partyka <david.partyka at kitware.com<mailto:david.partyka at kitware.com>> wrote:
git checkout v3.10.1 will put you right on the tag.
On Tue, May 24, 2011 at 2:38 PM, Michael Jackson <mike.jackson at bluequartz.net<mailto:mike.jackson at bluequartz.net>> wrote:
I don't usually run them as 'sudo' either but I am grasping at anything at this point. This almost seems like the main ParaView program isn't loading a library/plugin that contains the menu bar setup code. Is that code in fact in a library or plugin? Maybe that library/plugin isn't getting properly setup during the fixup_bundle stage? Maybe I have a missmash of code in my ParaView source directory? What is the git tag for ParaView 3.10.1? Maybe I am not pulling correctly? Getting ready for another build with a completely clean 3.10.1 download from Kitware.
--
Mike Jackson <www.bluequartz.net<http://www.bluequartz.net>>

On May 24, 2011, at 1:42 PM, David Partyka wrote:

> The only other thing I can think of is that I don't run any of those commands as sudo to create the binary. If you mix/match priviledge/non-priviliedged execution, something will likely have a permission problem and fail. To generate the binary this is my bash history verbatim.
>
>   540  mkdir build-mike
>   541  cd source/
>   542  git pull
>   543  git submodule update
>   544  cd ..
>   545  cd build-mike/
>   546* cmake -DBUILD_SHARED_LIBS:BOOL=ON -DCMAKE_BUILD_TYPE:STRING=Release -DCMAKE_INSTALL_PREFIX=/Users/Shared/Toolkits/ParaView-3.10.1 -DCMAKE_OSX_ARCHITECTURES:STRING="x86_64" -DCMAKE_OSX_DEPLOYMENT_TARGET:STRING="10.5" -DCMAKE_OSX_SYSROOT:PATH="/Developer/SDKs/MacOSX10.5.sdk" ../source/
> <launched cmake-gui to set qmake location>
>   547  make -j18
>   548  cpack -G DragNDrop --config Applications/ParaView/CPackParaViewConfig.cmake
>
>
> On Tue, May 24, 2011 at 8:31 AM, Michael Jackson <mike.jackson at bluequartz.net<mailto:mike.jackson at bluequartz.net>> wrote:
> Hmm. I am not seeing anything in there that is different from my setup
> besides the Qt version. I have tried both 4.6.3 and 4.7.2 of Qt and
> CMake versions 2.8.3 and 2.8.4. All with the same issue. Maybe asking
> on the Qt interest list if anyone has ever seen this type of behavior
> before?
> _________________________________________________________
> Mike Jackson                  mike.jackson at bluequartz.net<mailto:mike.jackson at bluequartz.net>
>
>
> On Tue, May 24, 2011 at 8:14 AM, David Partyka
> <david.partyka at kitware.com<mailto:david.partyka at kitware.com>> wrote:
> > Qt 4.6.3 built by hand with cocoa, the binary is x64 only targeting 10.5. I
> > am building from the tip of the 'release' branch.
> > Qt Configure command:
> > export QMAKE_MACOSX_DEPLOYMENT_TARGET=10.5
> > ./configure
> > --prefix=/Users/partyd/Dashboards/Support/qt-4.6.3-MacOSX10.5/bin -nomake
> > demos -nomake examples -arch x86_64 -opensource -release -cocoa -shared
> >
> > I also pass these in as -D arguments on initial configure with cmake.
> > set(CMAKE_OSX_ARCHITECTURES "x86_64" CACHE STRING "force build for 64-bit
> > Leopard" FORCE)
> > set(CMAKE_OSX_DEPLOYMENT_TARGET "10.5" CACHE STRING "force build for 64-bit
> > Leopard" FORCE)
> > set(CMAKE_OSX_SYSROOT "/Developer/SDKs/MacOSX10.5.sdk" CACHE PATH "force
> > build for 64-bit Leopard" FORCE)
> > On Mon, May 23, 2011 at 10:30 PM, Michael Jackson
> > <mike.jackson at bluequartz.net<mailto:mike.jackson at bluequartz.net>> wrote:
> >>
> >> Dave,
> >>  What is the configuration you are using? Qt Version? As Carbon or Cocoa?
> >> Universal Binaries or x64 only? Self build or download from Nokia?
> >>
> >>  What tag from paraview git repository are you using? I may be able to get
> >> my environment going like yours.
> >>
> >>  I also tried the latest ParaView master from head and my plugins need to
> >> be updated for that to work so using that is out of the question at this
> >> point.
> >>
> >>  This is what I have tried and have not worked:
> >>    Qt 4.6.2 Self built with NO custom plugins
> >>    Qt 4.7.2 Self built with NO custom plugins
> >>    "make install" of both of the above.
> >>    using sudo for everything to avoid possible permissions issues.
> >>
> >> I'll download the prebuilt Qt libraries from Nokia and try those. I guess
> >> I could also try CMake 2.8.4
> >> ___________________________________________________________
> >> Mike Jackson                      www.bluequartz.net<http://www.bluequartz.net>
> >> Principal Software Engineer       mike.jackson at bluequartz.net<mailto:mike.jackson at bluequartz.net>
> >> BlueQuartz Software               Dayton, Ohio
> >>
> >>
> >>
> >> On May 23, 2011, at 6:33 PM, David Partyka wrote:
> >>
> >> > Can you provide the initial cmake configuration details of your vanila
> >> > paraview build?
> >> >
> >> > On Mon, May 23, 2011 at 6:02 PM, Michael Jackson
> >> > <mike.jackson at bluequartz.net<mailto:mike.jackson at bluequartz.net>> wrote:
> >> > I tried this also:
> >> >
> >> > 562:[mjackson at ferb2:4.6.2]$ sudo rm -rf _CPack_Packages/; sudo cpack -G
> >> > ZIP --config Applications/ParaView/CPackParaViewConfig.cmake
> >> > CPack: Create package using ZIP
> >> > CPack: Install projects
> >> > CPack: - Run preinstall target for: ParaView Runtime Libs
> >> > CPack: - Install project: ParaView Runtime Libs
> >> > CPack: - Run preinstall target for: HDF5 Core Library
> >> > CPack: - Install project: HDF5 Core Library
> >> > CPack: - Run preinstall target for: VTK Runtime Libs
> >> > CPack: - Install project: VTK Runtime Libs
> >> > CPack: - Run preinstall target for: ParaView Components
> >> > CPack: - Install project: ParaView Components
> >> > CPack: Create package
> >> > CPack Error: Problem while adding file<
> >> > /Users/Shared/OpenSource/ParaView-3.10.1/4.6.2<tel:3.10.1%2F4.6.2>/_CPack_Packages/Darwin-i386/ZIP/ParaView-3.10.1-Darwin-i386/lib/paraview-3.10/libCosmo.dylib>
> >> > to archive
> >> > </Users/Shared/OpenSource/ParaView-3.10.1/4.6.2<tel:3.10.1%2F4.6.2>/_CPack_Packages/Darwin-i386/ZIP/ParaView-3.10.1-Darwin-i386.zip>
> >> > .ERROR =archive_write_header: Filetype not supported
> >> > CPack Error: Problem compressing the directory
> >> > CPack Error: Error when generating package: ParaView
> >> >
> >> >
> >> > And that was built against Qt 4.6.2.
> >> > ___________________________________________________________
> >> > Mike Jackson                      www.bluequartz.net<http://www.bluequartz.net>
> >> > Principal Software Engineer       mike.jackson at bluequartz.net<mailto:mike.jackson at bluequartz.net>
> >> > BlueQuartz Software               Dayton, Ohio
> >> >
> >> > On May 23, 2011, at 5:56 PM, David Partyka wrote:
> >> >
> >> > > I am really unsure, I haven't ever seen these kinds of errors before
> >> > > and I am unable to reproduce this. sla.r on my system appears to just
> >> > > contain license information. Have you tried manually removeing the
> >> > > _CPack_Packages directory in your build tree to see if for some reason cpack
> >> > > isn't able to blow it away entirely?
> >> > >
> >> > > On Mon, May 23, 2011 at 5:24 PM, Michael Jackson
> >> > > <mike.jackson at bluequartz.net<mailto:mike.jackson at bluequartz.net>> wrote:
> >> > > When running CPack on a "clean" paraview build directory where NONE of
> >> > > my plugins are being build I get the following after trying to run CPack:
> >> > >
> >> > > cpack -G DragNDrop --config
> >> > > Applications/ParaView/CPackParaViewConfig.cmake
> >> > > .....
> >> > >
> >> > >
> >> > > /Users/Shared/OpenSource/ParaView-3.10.1/Build/_CPack_Packages/Darwin-i386/DragNDrop/sla.r:522:
> >> > > ### /usr/bin/Rez - String spans lines.
> >> > >
> >> > > /Users/Shared/OpenSource/ParaView-3.10.1/Build/_CPack_Packages/Darwin-i386/DragNDrop/sla.r:
> >> > > ### /usr/bin/Rez - Since errors occurred,
> >> > > /Users/Shared/OpenSource/ParaView-3.10.1/Build/_CPack_Packages/Darwin-i386/DragNDrop/temp-udco.dmg's
> >> > > resource fork was not completely updated.
> >> > >
> >> > > /Users/Shared/OpenSource/ParaView-3.10.1/Build/_CPack_Packages/Darwin-i386/DragNDrop/sla.r:
> >> > > ### /usr/bin/Rez - SysError -37 during set file info.
> >> > >
> >> > > CPack Error: Problem compressing the directory
> >> > > CPack Error: Error when generating package: ParaView
> >> > >
> >> > >
> >> > >
> >> > > ___________________________________________________________
> >> > > Mike Jackson                      www.bluequartz.net<http://www.bluequartz.net>
> >> > > Principal Software Engineer       mike.jackson at bluequartz.net<mailto:mike.jackson at bluequartz.net>
> >> > > BlueQuartz Software               Dayton, Ohio
> >> > >
> >> > > On May 23, 2011, at 4:32 PM, David Partyka wrote:
> >> > >
> >> > > > I've never seen anything like that, as that is the same process I
> >> > > > used to make the 3.10.1 binaries. Though I did use cmake 2.8.4. Are you
> >> > > > using a really new Qt or something along those lines?
> >> > > >
> >> > > > On Mon, May 23, 2011 at 4:19 PM, Michael Jackson
> >> > > > <mike.jackson at bluequartz.net<mailto:mike.jackson at bluequartz.net>> wrote:
> >> > > > I followed the directions on the wiki page to compile my own
> >> > > > ParaView 3.10.1 because I have some custom plugins that I compile. The .dmg
> >> > > > image was created just fine but the contained "ParaView.app" when launched
> >> > > > only has a menu bar that has "New Application" menu. Nothing else. Yet when
> >> > > > I run it from the Build folder everything works just fine. Is there
> >> > > > something in the cmake configuration of ParaView that I need to set that
> >> > > > tells CMake that I am going to making a redistributable package? The same
> >> > > > thing happens if I try a "make install" from the command line. This is on OS
> >> > > > X 10.6.8 with CMake 2.8.3 and the ParaView 3.10.1 sources from the web site.
> >> > > > ___________________________________________________________
> >> > > > Mike Jackson                      www.bluequartz.net<http://www.bluequartz.net>
> >> > > > Principal Software Engineer       mike.jackson at bluequartz.net<mailto:mike.jackson at bluequartz.net>
> >> > > > BlueQuartz Software               Dayton, Ohio
> >> > > >
> >> > > > _______________________________________________
> >> > > > Powered by www.kitware.com<http://www.kitware.com>
> >> > > >
> >> > > > Visit other Kitware open-source projects at
> >> > > > http://www.kitware.com/opensource/opensource.html
> >> > > >
> >> > > > Please keep messages on-topic and check the ParaView Wiki at:
> >> > > > http://paraview.org/Wiki/ParaView
> >> > > >
> >> > > > Follow this link to subscribe/unsubscribe:
> >> > > > http://www.paraview.org/mailman/listinfo/paraview
> >> > > >
> >> > >
> >> > >
> >> >
> >> >
> >>
> >
> >
> _______________________________________________
> Powered by www.kitware.com<http://www.kitware.com>
>
> Visit other Kitware open-source projects at http://www.kitware.com/opensource/opensource.html
>
> Please keep messages on-topic and check the ParaView Wiki at: http://paraview.org/Wiki/ParaView
>
> Follow this link to subscribe/unsubscribe:
> http://www.paraview.org/mailman/listinfo/paraview
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.paraview.org/pipermail/paraview/attachments/20110524/d159e6d6/attachment-0001.htm>

More information about the ParaView mailing list