[Paraview] ParaViewWeb Server on Linux

[katsumi.sekido at unisys.co.jp]

Dear  Sebastien,
hello, thank you for reply. I will respond to your questions as follows.

> 1) Did you try to execute manually the PWServer executable
> based on the path that is set inside
> TOMCAT_ROOT/lib/pw-config.properties. Did it crash ?

Yes I did. And it didn't crash.

> 2) Did you forget to start activemq ?

No, I started activemq.

> 3) Is there any X running on your linux computer ?

Yes there is X on my computer.

> 4) Which user is running tomcat ?

The user is "root(=super user)"... Is this user wrong?

Best regards,

Katsumi SEKIDO


> -----Original Message-----
> From: Sebastien Jourdain [mailto:sebastien.jourdain at kitware.com]
> Sent: Tuesday, July 19, 2011 9:44 PM
> To: Sekido, Katsumi
> Cc: paraview at paraview.org
> Subject: Re: ParaViewWeb Server on Linux
>
> Hi Kasumi,
>
> Could you be more precise on what you done from the FAQ and
> what did you get ?
>
> 1) Did you try to execute manually the PWServer executable
> based on the path that is set inside
> TOMCAT_ROOT/lib/pw-config.properties. Did it crash ?
>
> 2) Did you forget to start activemq ?
>
> 3) Is there any X running on your linux computer ?
>
> 4) Which user is running tomcat ?
>
> Thanks,
>
> Seb
>
> On Tue, Jul 19, 2011 at 12:53 AM,
> <katsumi.sekido at unisys.co.jp> wrote:
> > Dear Sebastien,
> >
> > hello, long time no see. Thanks to your kind advices, I
> could get some
> > war files in the Tomcat directory.
> >
> > But I try to execute samples, I see the page correctly,
> but not the
> > 3D content of the view.
> >
> > I check FAQ http://www.vtk.org/Wiki/ParaViewWeb/FAQ and follow the
> > chekpoint as written, but I can't see the 3D content of the
> view now.
> >
> > I also check log file in the Tomcat directory named "pw-out-?????",
> > those files say as following,
> >
> > -------------------------------------------------
> >
> > JMS Initialized in 0.631006 seconds
> > sessionID : 98307
> > logLevel : ERROR
> > Processing Engine Initialized in 1.77516 seconds
> >
> > Processing engine is started !
> >
> > --------------------------------------------------
> >
> > The Web service seems to work normally. And I can't
> understand what is
> > wrong.
> > So... please let me know how can I fix this problem.
> >
> > Best regards,
> >
> > Katsumi SEKIDO
> >
> >> -----Original Message-----
> >> From: Sebastien Jourdain [mailto:sebastien.jourdain at kitware.com]
> >> Sent: Thursday, June 02, 2011 9:03 PM
> >> To: Sekido, Katsumi
> >> Cc: paraview at paraview.org
> >> Subject: Re: ParaViewWeb Server on Linux
> >>
> >> in fact the pw directory is the source directory of ParaViewWeb.
> >> Moreover, the documentation explain how to compile each component
> >> independently from each other, but if you simply turn ON all the
> >> options, you will get everything at once.
> >>
> >> Seb
> >>
> >> On Thu, Jun 2, 2011 at 3:05 AM,
> <katsumi.sekido at unisys.co.jp> wrote:
> >> > Dear Sebastien,
> >> >
> >> > hello, thanks to your support, I could fix the
> make-process issue.
> >> > But in the next phase, I met a trouble again...
> >> > By the manual, I have to "ccmake ../pw" but there are no "pw"
> >> > directory, so I searched a suitable directory by "grep
> >> > CORE_SERVICE_URL", but there are no files that contain
> >> "CORE_SERVICE_URL". So I missed the "pw"
> >> > directory.
> >> > What directory shoud I indicate as the "pw" directory?
> >> >
> >> > Best regards,
> >> >
> >> > Katsumi SEKIDO
> >> >
> >> >> -----Original Message-----
> >> >> From: Sebastien Jourdain [mailto:sebastien.jourdain at kitware.com]
> >> >> Sent: Wednesday, June 01, 2011 8:17 PM
> >> >> To: Sekido, Katsumi
> >> >> Cc: paraview at paraview.org
> >> >> Subject: Re: ParaViewWeb Server on Linux
> >> >>
> >> >> Hi Katsumi,
> >> >>
> >> >> this issue is related to a miss-matching version of
> ParaView and
> >> >> ParaViewWeb.
> >> >> This previous message explain how to fix that issue.
> >> >>
> >> >> http://markmail.org/message/ws3rufiq3lni2ffs
> >> >>
> >> >> Seb
> >> >>
> >> >> On Wed, Jun 1, 2011 at 3:16 AM,
> >> <katsumi.sekido at unisys.co.jp> wrote:
> >> >> > Dear Sebastien,
> >> >> >
> >> >> > hello, I re-install cmake from binary distribution, ccmake
> >> >> becomes to work!
> >> >> >
> >> >> > And I tried the abusolute path instead of  the relative
> >> >> path, so the
> >> >> > situation progressed.(Makefile has generated)
> >> >> >
> >> >> > But in make process, following error has occered.
> >> >> >
> >> >> >
> >> >>
> >>
> ---------------------------------------------------------------------
> >> >> -
> >> >> > ----------------------------------------------
> >> >> > :
> >> >> > :
> >> >> > [ 52%] Built target ParaWebPlugin [ 57%] Building CXX object
> >> >> > ParaViewAdapter/CMakeFiles/PWServer.dir/main.cxx.o
> >> >> > /root/ParaViewWeb/ParaViewAdapter/main.cxx: In function int
> >> >> main(int, char**):
> >> >> > /root/ParaViewWeb/ParaViewAdapter/main.cxx:41: error
> >> >> PROCESS_CLIENT is
> >> >> > not a member of 'vtkProcessModule"
> >> >> >
> >> >> >
> >> >>
> >>
> ---------------------------------------------------------------------
> >> >> -
> >> >> > ------------------------------------------------
> >> >> >
> >> >> > I checked ParaViewWeb/ParaViewAdapter/main.cxx and
> >> >> ParaView-3.10.1/Servers/Common/vtkProcessModule.h.
> >> >> > Certainly main.cxx refers "PROCESS_CLIENT" but this symbol
> >> >> is not defined in vtkProcessModule.h and other all files...
> >> >> >
> >> >> > How can I resolve this problem?
> >> >> >
> >> >> > Best regards,
> >> >> >
> >> >> > Katsumi SEKIDO
> >> >> >
> >> >> >> -----Original Message-----
> >> >> >> From: Sebastien Jourdain
> >> >> >> [mailto:sebastien.jourdain at kitware.com]
> >> >> >> Sent: Tuesday, May 31, 2011 8:38 PM
> >> >> >> To: Sekido, Katsumi
> >> >> >> Cc: paraview at paraview.org
> >> >> >> Subject: Re: ParaViewWeb Server on Linux
> >> >> >>
> >> >> >> Hi Katsumi,
> >> >> >>
> >> >> >> if you have a server X running, you can launch cmake-gui
> >> >> which will
> >> >> >> pop-up a graphical application ?
> >> >> >> On the other hand, could you explain why ccmake is
> not working ?
> >> >> >>
> >> >> >> Moreover, use absolute path inside your configuration
> >> >> instead of the
> >> >> >> relative ones.
> >> >> >> And the error that you are seeing is because you need to
> >> >> point to the
> >> >> >> build directory of ParaView so you can build one of the
> >> components
> >> >> >> needed by ParaViewWeb.
> >> >> >>
> >> >> >> Seb
> >> >> >>
> >> >> >> PS: You shouldn't change anything from the source directory.
> >> >> >> And if you use cmake instead of ccmake, it should work
> >> in the same
> >> >> >> way but less interactively. But the file that you can
> >> >> change inside
> >> >> >> the build directory is the CMakeCache.txt...
> >> >> >>
> >> >> >>
> >> >> >> On Tue, May 31, 2011 at 1:42 AM,
> >> >> <katsumi.sekido at unisys.co.jp> wrote:
> >> >> >> > Dear Sebastien,
> >> >> >> >
> >> >> >> > hello, thank you for reply. I understand SOURCE_DIR equals
> >> >> >> ParaViewWeb.
> >> >> >> > And I will explain my operation.
> >> >> >> >
> >> >> >> > I use cmake istead of ccmake because ccmake doesn't work in
> >> >> >> my environment.
> >> >> >> > So I modified "CMakeLists.txt" of "ParaVIewWeb" as follows.
> >> >> >> >
> >> >> >>
> >> >>
> >>
> ---------------------------------------------------------------------
> >> >> >> -
> >> >> >> > -----------------
> >> >> >> > #
> >> >> >> > #          ParaView Web Visualisation @ Kitware #
> >> >> >> >
> >> >> >> > cmake_minimum_required(VERSION 2.6) set(ACTIVEMQ_CPP
> >> >> >> > "/usr/local/lib/libactivemq-cpp.so")
> >> >> >> > set(ACTIVEMQ_INCLUDE_DIR
> >> >> "/usr/local/include/activemq-cpp-3.1.0/")
> >> >> >> > set(BUILD_PW_SERVER "ON")
> >> >> >> > set(BUILD_TESTING "ON")
> >> >> >> > set(BUILD_WEB_SERVICE "OFF")
> >> >> >> > set(CMAKE_BUILD_TYPE "Debug") set(CMAKE_INSTALL_PREFIX
> >> >> >> > "../install-pw") set(ParaView_DIR
> >> >> >> > "../build-paraview")
> >> >> >> > project(PARAVIEW_WEB)
> >> >> >> > :
> >> >> >> > :
> >> >> >> >
> >> >> >> >
> >> >> >>
> >> >>
> >>
> ---------------------------------------------------------------------
> >> >> >> -
> >> >> >> > --------------------------
> >> >> >> >
> >> >> >> > These "set" operations seem to work well in "ParaView
> >> >> >> build" process,
> >> >> >> > but in "build-pw" process, messages are as follows.
> >> >> >> >
> >> >> >> >
> >> >> >>
> >> >>
> >>
> ---------------------------------------------------------------------
> >> >> >> -
> >> >> >> > --------------------------
> >> >> >> >
> >> >> >> > [root at yshimizu1 build-pw]# cmake ../ParaViewWeb
> >> >> >> > -- The C compiler identification is GNU
> >> >> >> > -- The CXX compiler identification is GNU
> >> >> >> > -- Check for working C compiler: /usr/bin/gcc
> >> >> >> > -- Check for working C compiler: /usr/bin/gcc -- works
> >> >> >> > -- Detecting C compiler ABI info
> >> >> >> > -- Detecting C compiler ABI info - done
> >> >> >> > -- Check for working CXX compiler: /usr/bin/c++
> >> >> >> > -- Check for working CXX compiler: /usr/bin/c++ -- works
> >> >> >> > -- Detecting CXX compiler ABI info
> >> >> >> > -- Detecting CXX compiler ABI info - done CMake Error at
> >> >> >> > ParaViewAdapter/CMakeLists.txt:9 (find_package):
> >> >> >> >  Could not find module FindParaView.cmake or a
> >> >> >> configuration file for
> >> >> >> >  package ParaView.
> >> >> >> >
> >> >> >> >  Adjust CMAKE_MODULE_PATH to find
> FindParaView.cmake or set
> >> >> >> > ParaView_DIR to
> >> >> >> >  the directory containing a CMake configuration file for
> >> >> ParaView.
> >> >> >> > The file
> >> >> >> >  will have one of the following names:
> >> >> >> >
> >> >> >> >    ParaViewConfig.cmake
> >> >> >> >    paraview-config.cmake
> >> >> >> >
> >> >> >> >
> >> >> >> >
> >> >> >> > CMake Error at ParaViewAdapter/CMakeLists.txt:12 (include):
> >> >> >> >  include called with wrong number of arguments.  Include
> >> >> only takes
> >> >> >> > one
> >> >> >> >  file.
> >> >> >> >
> >> >> >> >
> >> >> >> > CMake Error at ParaViewAdapter/CMakeLists.txt:50
> >> >> >> (add_paraview_plugin):
> >> >> >> >  Unknown CMake command "add_paraview_plugin".
> >> >> >> >
> >> >> >> >
> >> >> >> > -- Configuring incomplete, errors occurred!
> >> >> >> >
> >> >> >> >
> >> >> >>
> >> >>
> >>
> ---------------------------------------------------------------------
> >> >> >> -
> >> >> >> > ---------------------------
> >> >> >> >
> >> >> >> > I guess... in this case, setting variable operations are
> >> >> >> wrong... If
> >> >> >> > so, please let me know the right way to set variable.
> >> >> >> >
> >> >> >> > Best regards,
> >> >> >> >
> >> >> >> > Katsumi SEKIDO
> >> >> >> >
> >> >> >> >
> >> >> >> >> -----Original Message-----
> >> >> >> >> From: Sebastien Jourdain
> >> >> >> >> [mailto:sebastien.jourdain at kitware.com]
> >> >> >> >> Sent: Monday, May 30, 2011 9:56 PM
> >> >> >> >> To: Sekido, Katsumi
> >> >> >> >> Cc: paraview at paraview.org
> >> >> >> >> Subject: Re: ParaViewWeb Server on Linux
> >> >> >> >>
> >> >> >> >> Hi Katsumi,
> >> >> >> >>
> >> >> >> >> your first attempt was the right one. SOURCE_DIR is the
> >> >> >> ParaViewWeb
> >> >> >> >> source directory that you get from git. It's the higher
> >> >> directory
> >> >> >> >> that contains a CMakeList.txt file.
> >> >> >> >>
> >> >> >> >> Now the question is, what do you mean by CMake
> doesn't work.
> >> >> >> >>
> >> >> >> >> Seb
> >> >> >> >>
> >> >> >> >> On Mon, May 30, 2011 at 5:53 AM,
> >> >> >> <katsumi.sekido at unisys.co.jp> wrote:
> >> >> >> >> > Dear Sebastien,
> >> >> >> >> >
> >> >> >> >> > hello, as you mentioned,  I missed activemq-cpp project
> >> >> >> >> build. Sorry...
> >> >> >> >> > I successed activemq-cpp build and ParaView build. But
> >> >> >> in the next
> >> >> >> >> > phase, I met a trouble.
> >> >> >> >> >
> >> >> >> >> > By the manual (website and readme.txt), I have to build
> >> >> >> >> > the
> >> >> >> >> "build-pw"
> >> >> >> >> > directory by "ccmake ../SOURCE_DIR". But I couldn't find
> >> >> >> >> "SOURCE_DIR".
> >> >> >> >> > So I tried "ParaViewWeb" directory gotten by
> git command.
> >> >> >> >> But cmake doesn't work...
> >> >> >> >> > How should I indicate directory as the "SOURCE_DIR" ?
> >> >> >> >> >
> >> >> >> >> > Best regards,
> >> >> >> >> >
> >> >> >> >> > Katsumi SEKIDO
> >> >> >> >> >
> >> >> >> >> >> -----Original Message-----
> >> >> >> >> >> From: Sebastien Jourdain
> >> >> >> >> >> [mailto:sebastien.jourdain at kitware.com]
> >> >> >> >> >> Sent: Thursday, May 26, 2011 8:54 PM
> >> >> >> >> >> To: Sekido, Katsumi
> >> >> >> >> >> Cc: paraview at paraview.org
> >> >> >> >> >> Subject: Re: paraviewweb on windows
> >> >> >> >> >>
> >> >> >> >> >> Hi Katsumi,
> >> >> >> >> >>
> >> >> >> >> >> did you looked at that web page ?
> >> >> >> >> >> http://activemq.apache.org/building-activemq-cpp.html
> >> >> >> >> >>
> >> >> >> >> >> The first link refer to the project that you
> are missing.
> >> >> >> >> I guess, in
> >> >> >> >> >> your case, you'll have to build that project too.
> >> >> >> >> >>
> >> >> >> >> >> Seb
> >> >> >> >> >>
> >> >> >> >> >> On Thu, May 26, 2011 at 4:20 AM,
> >> >> >> >> <katsumi.sekido at unisys.co.jp> wrote:
> >> >> >> >> >> > Dear Sebastien,
> >> >> >> >> >> >
> >> >> >> >> >> > hello, now I'm trying build ParaViewWeb server on
> >> >> >> >> Linux(CentOS5.6).
> >> >> >> >> >> > But at the make process of activemq-cpp, error
> >> has occured.
> >> >> >> >> >> > The message is "/usr/bin/ld: cannot find -luuid".
> >> >> >> >> >> > So I search some uuid-rpms and attached them, but the
> >> >> >> >> >> situation doesn't change.
> >> >> >> >> >> > So please let me know how can I resolve this error.
> >> >> >> >> >> >
> >> >> >> >> >> > Best regards,
> >> >> >> >> >> >
> >> >> >> >> >> > Katsumi SEKIDO
> >> >> >> >> >> >
> >> >> >> >> >> >> -----Original Message-----
> >> >> >> >> >> >> From: Sebastien Jourdain
> >> >> >> >> >> >> [mailto:sebastien.jourdain at kitware.com]
> >> >> >> >> >> >> Sent: Wednesday, May 11, 2011 3:05 PM
> >> >> >> >> >> >> To: Sekido, Katsumi
> >> >> >> >> >> >> Cc: paraview at paraview.org
> >> >> >> >> >> >> Subject: Re: paraviewweb on windows
> >> >> >> >> >> >>
> >> >> >> >> >> >> Hi Katsumi,
> >> >> >> >> >> >>
> >> >> >> >> >> >> If you can get a Linux machine, it will be
> way simpler.
> >> >> >> >> >> >> On the other hand, for git you can use the http url
> >> >> >> >> which use the
> >> >> >> >> >> >> standard http protocol to communicate. So you
> >> >> >> >> >> >> shouldn't
> >> >> >> >> >> get any issue
> >> >> >> >> >> >> with your proxy.
> >> >> >> >> >> >>
> >> >> >> >> >> >> > git clone http://paraview.org/ParaViewWeb.git
> >> >> >> >> >> >>
> >> >> >> >> >> >> Seb
> >> >> >> >> >> >>
> >> >> >> >> >> >> On Wed, May 11, 2011 at 12:03 AM,
> >> >> >> <katsumi.sekido at unisys.co.jp>
> >> >> >> >> >> >> wrote:
> >> >> >> >> >> >> > Dear Sebastien,
> >> >> >> >> >> >> >
> >> >> >> >> >> >> > hello, thank you for reply. I understand the
> >> >> situation. We
> >> >> >> >> >> >> will try to
> >> >> >> >> >> >> > build on Linux or (if possible) Windows.
> >> >> >> >> >> >> >
> >> >> >> >> >> >> > But anyway threre is one problem. I
> installed Cygwin
> >> >> >> >> >> >> > and
> >> >> >> >> >> try to get
> >> >> >> >> >> >> > source file and makefile and other resources, but
> >> >> >> >> >> >> > our
> >> >> >> >> >> company proxy
> >> >> >> >> >> >> > server does not open git-protocol port, so I
> >> >> couldn't get
> >> >> >> >> >> >> them. And it might impossible to open this port.
> >> >> >> >> >> >> >
> >> >> >> >> >> >> > So... if possible, could you send me these
> >> resources as
> >> >> >> >> >> attachments?
> >> >> >> >> >> >> > And if it is difficult, it is very helpful to
> >> >> let me know
> >> >> >> >> >> >> any download sites...
> >> >> >> >> >> >> >
> >> >> >> >> >> >> > Best regards,
> >> >> >> >> >> >> >
> >> >> >> >> >> >> > Katsumi SEKIDO
> >> >> >> >> >> >> >
> >> >> >> >> >> >> >> -----Original Message-----
> >> >> >> >> >> >> >> From: Sebastien Jourdain
> >> >> >> >> >> >> >> [mailto:sebastien.jourdain at kitware.com]
> >> >> >> >> >> >> >> Sent: Tuesday, May 10, 2011 9:15 PM
> >> >> >> >> >> >> >> To: Sekido, Katsumi
> >> >> >> >> >> >> >> Cc: paraview at paraview.org
> >> >> >> >> >> >> >> Subject: Re: paraviewweb on windows
> >> >> >> >> >> >> >>
> >> >> >> >> >> >> >> Hi Katsumi,
> >> >> >> >> >> >> >>
> >> >> >> >> >> >> >> as I said previously, ParaViewWeb should work
> >> >> on Windows
> >> >> >> >> >> >> but it's a
> >> >> >> >> >> >> >> non-tested platform. Which means we can't
> >> >> really help you
> >> >> >> >> >> >> with that.
> >> >> >> >> >> >> >> So if you don't have any skills in building
> >> >> such system
> >> >> >> >> >> >> >> on
> >> >> >> >> >> >> Windows,
> >> >> >> >> >> >> >> you should definitely try to get a Linux
> or a Mac.
> >> >> >> >> >> >> >> That's exactly what happen with Luca who
> >> >> finally managed
> >> >> >> >> >> >> to setup a
> >> >> >> >> >> >> >> server on Linux.
> >> >> >> >> >> >> >>
> >> >> >> >> >> >> >> Seb
> >> >> >> >> >> >> >>
> >> >> >> >> >> >> >> On Tue, May 10, 2011 at 5:48 AM,
> >> >> >> >> >> >> <katsumi.sekido at unisys.co.jp> wrote:
> >> >> >> >> >> >> >> > Dear Sebastien,
> >> >> >> >> >> >> >> >
> >> >> >> >> >> >> >> > hello, now I'm trying to build
> ParaViewWeb server
> >> >> >> >> on Windows.
> >> >> >> >> >> >> >> > Your colleague could built it smoothly...
> >> but now I
> >> >> >> >> >> am in a mess.
> >> >> >> >> >> >> >> >
> >> >> >> >> >> >> >> > I am ashamed my poor skill. And I need
> >> your support.
> >> >> >> >> >> >> >> >
> >> >> >> >> >> >> >> > I read website
> >> >> >> >> >> >> >>
> "http://www.vtk.org/Wiki/ParaViewWeb_Building" and
> >> >> >> >> >> >> >> FAQ,
> >> >> >> >> >> >> >> > but the description is only for UNIX. So I
> >> >> wonder if I
> >> >> >> >> >> >> >> shoud install
> >> >> >> >> >> >> >> > Cygwin or install Windows utilities
> >> individually. (
> >> >> >> >> >> For example
> >> >> >> >> >> >> >> > "nmake" )
> >> >> >> >> >> >> >> >
> >> >> >> >> >> >> >> > So it is very helpful for me to know more
> >> detailed
> >> >> >> >> >> >> >> > building
> >> >> >> >> >> >> >> procedure for Windows.
> >> >> >> >> >> >> >> > And as you wrote, now getting activemq-cpp
> >> >> >> 3.1.0. is very
> >> >> >> >> >> >> >> difficult...
> >> >> >> >> >> >> >> > Please let me know how to get/build
> >> >> activemq-cpp 3.1.0.
> >> >> >> >> >> >> >> >
> >> >> >> >> >> >> >> > Best regards,
> >> >> >> >> >> >> >> >
> >> >> >> >> >> >> >> > Katsumi SEKIDO
> >> >> >> >> >> >> >> >
> >> >> >> >> >> >> >> >> -----Original Message-----
> >> >> >> >> >> >> >> >> From: Sebastien Jourdain
> >> >> >> >> >> >> >> >> [mailto:sebastien.jourdain at kitware.com]
> >> >> >> >> >> >> >> >> Sent: Thursday, April 28, 2011 8:50 PM
> >> >> >> >> >> >> >> >> To: Sekido, Katsumi
> >> >> >> >> >> >> >> >> Subject: Re: paraviewweb on windows
> >> >> >> >> >> >> >> >>
> >> >> >> >> >> >> >> >> Hi Katsumi,
> >> >> >> >> >> >> >> >>
> >> >> >> >> >> >> >> >> ParaViewWeb should work on windows.
> But it has
> >> >> >> >> >> >> >> >> never
> >> >> >> >> >> >> been really
> >> >> >> >> >> >> >> >> tested on Windows. Although one of my
> >> colleague did
> >> >> >> >> >> >> >> managed to build
> >> >> >> >> >> >> >> >> it.
> >> >> >> >> >> >> >> >> The tricky part will be to get/build
> >> >> >> >> >> >> >> >> activemq-cpp
> >> >> >> >> >> >> 3.1.0. The rest
> >> >> >> >> >> >> >> >> should be pretty smooth.
> >> >> >> >> >> >> >> >>
> >> >> >> >> >> >> >> >> Seb
> >> >> >> >> >> >> >> >>
> >> >> >> >> >> >> >> >>
> >> >> >> >> >> >> >> >> On Thu, Apr 28, 2011 at 1:44 AM,
> >> >> >> >> >> >> >> <katsumi.sekido at unisys.co.jp> wrote:
> >> >> >> >> >> >> >> >> > Dear Sebastien,
> >> >> >> >> >> >> >> >> >
> >> >> >> >> >> >> >> >> > Hello, I read the mail thread "[Paraview]
> >> >> >> [paraviewweb]
> >> >> >> >> >> >> >> >> trouble with paraviewweb on windows".
> >> >> >> >> >> >> >> >> > But unfortunately we have to build a
> >> >> >> >> paraviewweb server on
> >> >> >> >> >> >> >> >> Microsoft Windows.
> >> >> >> >> >> >> >> >> > I guess... Mac works as a server
> well, so it
> >> >> >> >> >> >> >> >> > is
> >> >> >> >> possible
> >> >> >> >> >> >> >> >> > to
> >> >> >> >> >> >> >> >> build a server on Windows.
> >> >> >> >> >> >> >> >> > Do you have any plan to make it possible to
> >> >> >> >> build a server
> >> >> >> >> >> >> >> >> on Windows?
> >> >> >> >> >> >> >> >> > And if you have no plan, please tell me how
> >> >> >> >> >> >> >> >> > can
> >> >> >> >> I build a
> >> >> >> >> >> >> >> >> server on Windows?
> >> >> >> >> >> >> >> >> >
> >> >> >> >> >> >> >> >> > Best regards,
> >> >> >> >> >> >> >> >> >
> >> >> >> >> >> >> >> >> > Katsumi SEKIDO
> >> >> >> >> >> >> >> >> >
> >> >> >> >> >> >> >> >>
> >> >> >> >> >> >> >>
> >> >> >> >> >> >>
> >> >> >> >> >>
> >> >> >> >>
> >> >> >>
> >> >>
> >> >
> >>
> >
>