[Paraview] running paraview in parallel

burlen burlen.loring at gmail.com
Sat Feb 27 16:24:13 EST 2010


It's really not info info for me to give you any specific advise. But my 
best guess is that at run time the wrong open gl liibraries are being 
loaded. That will crash PV. You want the mesa libraries from your local 
mesa build to be loaded, you have to prepend its path to LD_LIBRARY_PATH 
environment var. Also double check in ccmake, that all of the opengl 
libs come from your mesa build.

Vishwa wrote:
>
> The problem is that it keeps complaining about not having many library 
> files..I tried and installed them..now, when i compiled, it didnt' 
> give an error..but when opened it gave segmentation fault.. i read 
> somewhere online that u need to use unlimit stacksize, which I did and 
> still doesnt work.
>
> i had used -mpi opition and also to use mesa ..
>
> hit a wall again..
>
> Regards,
> vishwa
>
> On Sat, Feb 27, 2010 at 3:12 PM, burlen <burlen.loring at gmail.com 
> <mailto:burlen.loring at gmail.com>> wrote:
>
>     Apparently your cluster doesn't have X11 server started. The error
>     message reports this path because __FILE__ cpp macro is used.
>
>     Question: Why is it a problem to install and run ParaView from
>     your home folder? It should be OK.
>
>     Vishwa wrote:
>
>         Thankyou all for responding again..:)
>
>         I tried to compile paraview and to only hit a wall after wall
>         as I have to install it to my local folder due to not having
>         administrator privileges..
>
>         so i downloaded the binaries last night and checked that it
>         worked..
>
>         Today to  my surprise, when i try to open paraview in the hpc
>         headnode, where i downloaded the binaries, it gives the
>         following error..
>
>            [vishwa at hpc4 ~]$ paraview
>            ERROR: In
>          
>          /home/kitware/ParaView-3.6/ParaView3/VTK/Rendering/vtkXOpenGLRenderWindow.cxx,
>            line 632
>            vtkXOpenGLRenderWindow (0x143bb10): Cannot create GLX
>         context.    Aborting.
>
>
>         and i dont' have /home/kitware etc...directory...so i dont
>         understand what is happening..
>
>         I made sure that i included the path of the bin and lib in the
>         newly downloaded binary..
>
>         Any suggestions?
>
>         Regards,
>         vishwa
>
>         On Sat, Feb 27, 2010 at 2:38 PM, burlen
>         <burlen.loring at gmail.com <mailto:burlen.loring at gmail.com>
>         <mailto:burlen.loring at gmail.com
>         <mailto:burlen.loring at gmail.com>>> wrote:
>
>            Also be aware that there is a bug in ParaView, where if the
>         server
>            startup command doesn't return for some reason, ssh turns
>         into an
>            orphan process and will not relinquish the ports it used,
>            preventing any further use of those ports.
>
>            http://www.paraview.org/Bug/view.php?id=10283
>
>            I did submit a patch to fix it but it has yet to be applied.
>
>
>            burlen wrote:
>
>                Your command isn't quite right, specifically how you are
>                trying to specify the compute node.
>
>                Take a look at the section here,
>              
>          http://paraview.org/Wiki/Reverse_connection_and_port_forwarding#Reverse_Connection_Over_an_ssh_Tunnel
>
>
>                It's a little closer to your situation.
>
>                Vishwa wrote:
>
>                    Hi,
>                    Thanks for the reply..I did look at the wiki and
>         tried the
>                    following..
>
>                    I set up a server/client reverse connection and
>         trired to
>                    connect.. but i coudn't.. this was the command that
>         i gave
>                    for the server.. olivegarden is the hostname of my
>         laptop.
>
>                    ssh -i /home/dagarshali/.ssh/id_rsa
>                    vishwa at hpc4.iastate.edu
>         <mailto:vishwa at hpc4.iastate.edu>
>         <mailto:vishwa at hpc4.iastate.edu <mailto:vishwa at hpc4.iastate.edu>>
>                    <mailto:vishwa at hpc4.iastate.edu
>         <mailto:vishwa at hpc4.iastate.edu>
>                    <mailto:vishwa at hpc4.iastate.edu
>         <mailto:vishwa at hpc4.iastate.edu>>> node083 pvserver
>                    --reverse-connection --server-port=11111
>                    --client-host=olivegarden
>
>                    here node083 is the node where the pvserver was
>         launched...
>
>                    so wasn't sure how to give that info in this
>         command.. or
>                    am i doing something wrong.. when you say that
>         start the
>                    cient, am i just creating a server/client and
>         connect in
>                    manual mode..?
>
>                    Regards,
>                    Vishwa
>
>
>
>
>
>                    On Sat, Feb 27, 2010 at 1:00 PM, burlen
>                    <burlen.loring at gmail.com
>         <mailto:burlen.loring at gmail.com>
>         <mailto:burlen.loring at gmail.com <mailto:burlen.loring at gmail.com>>
>                    <mailto:burlen.loring at gmail.com
>         <mailto:burlen.loring at gmail.com>
>                    <mailto:burlen.loring at gmail.com
>         <mailto:burlen.loring at gmail.com>>>> wrote:
>
>                       By the way a number of common scenarios, issues and
>                    solutions are
>                       explained on the wiki
>
>                                
>         http://paraview.org/Wiki/Reverse_connection_and_port_forwarding
>
>                       Hope this helps
>
>                       Moreland, Kenneth wrote:
>
>                           Currently you are not launching the server
>         in reverse
>                           connection mode.  To launch the server in
>         reverse
>                    connection
>                           mode, you need to give it the arguments -rc (or
>                           --reverse-connection) and
>                    --client-host=/laptop.hostname.com/
>         <http://laptop.hostname.com/>
>                    <http://laptop.hostname.com/>
>                           <http://laptop.hostname.com/>.  When given these
>                    arguments,
>                           the server will immediately try to make a
>         connection to
>                           /laptop.hostname.com/
>         <http://laptop.hostname.com/> <http://laptop.hostname.com/>
>                    <http://laptop.hostname.com/>.  Thus,
>                           you first need to have your client running and
>                    waiting for the
>                           server to connect.  After getting things set up,
>                    you should
>                           eventually try to set up your client to
>                    automatically start
>                           the server with an ssh call and then wait
>         for the
>                    server to
>                           connect back.
>
>                           -Ken
>
>
>                           On 2/27/10 9:11 AM, "Vishwa"
>         <dagarshali at gmail.com <mailto:dagarshali at gmail.com>
>                    <mailto:dagarshali at gmail.com
>         <mailto:dagarshali at gmail.com>>
>                           <mailto:dagarshali at gmail.com
>         <mailto:dagarshali at gmail.com>
>
>                    <mailto:dagarshali at gmail.com
>         <mailto:dagarshali at gmail.com>>>> wrote:
>
>                              Hi,
>                              I would to visualize the data that is being
>                    computed on a
>                           hpc by
>                              using pvserver and paraview.
>
>                              i have come across a many documents
>         saying how
>                    to connect
>                           and the
>                              one what i thought might be appropriate in my
>                    case would to
>                           be to
>                              run pvserver on the hpc and then connect
>         to it usind
>                           server/client
>                              reverse connection from my desktop..
>
>                              here is the procedure that i use to
>         connect to
>                    the hpc to
>                           submit job.
>
>                              i log in to the head node via ssh
>         john at a.b.c.d
>
>                              i then submit my job using the the following
>                    script via
>                           qsub myscript
>
>
>                              *#PBS
>                                      
>          -lmem=2Gb,nodes=1:ppn=4,cput=24:00:00,walltime=24:00:00      
>                                                cd $PBS_O_WORKDIR
>
>                              cat ${PBS_NODEFILE} > node1
>                              mpirun --machinefile ${PBS_NODEFILE} -np
>         4 pvserver
>                              --use-offscreen-rendering -\
>                              -server-port=11111 >log1
>                              *
>                              in the node1 file, i get say node083 (and
>         it is
>                    repeated 4
>                           times)
>
>                              I am not sure how to connect to this node
>         say by
>                    running
>                           paraview
>                              from my laptop to visualize that.
>
>                              Any help would be greatly appreciated..
>
>                              Regards,
>                              vishwa
>
>
>
>                             ****      Kenneth Moreland
>                              ***      Sandia National Laboratories
>                           ***********  *** *** ***  email:
>         kmorel at sandia.gov <mailto:kmorel at sandia.gov>
>                    <mailto:kmorel at sandia.gov <mailto:kmorel at sandia.gov>>
>                           <mailto:kmorel at sandia.gov
>         <mailto:kmorel at sandia.gov> <mailto:kmorel at sandia.gov
>         <mailto:kmorel at sandia.gov>>>
>
>                           **  ***  **  phone: (505) 844-8919
>                              ***      web:  
>         http://www.cs.unm.edu/~kmorel <http://www.cs.unm.edu/%7Ekmorel>
>                    <http://www.cs.unm.edu/%7Ekmorel>
>                           <http://www.cs.unm.edu/%7Ekmorel>
>                           <http://www.cs.unm.edu/%7Ekmorel>
>
>                                    
>         ------------------------------------------------------------------------
>
>                           _______________________________________________
>                           Powered by www.kitware.com
>         <http://www.kitware.com> <http://www.kitware.com>
>                    <http://www.kitware.com>
>
>                           Visit other Kitware open-source projects at
>                          
>         http://www.kitware.com/opensource/opensource.html
>
>                           Please keep messages on-topic and check the
>                    ParaView Wiki at:
>                           http://paraview.org/Wiki/ParaView
>
>                           Follow this link to subscribe/unsubscribe:
>                          
>         http://www.paraview.org/mailman/listinfo/paraview
>                          
>
>
>
>
>



More information about the ParaView mailing list