[Paraview] Problem with remote display (Exceed)
Bernhard Gschaider
Bernhard.Gschaider at unileoben.ac.at
Thu Feb 24 08:01:55 EST 2005
Hi Julien!
Thanks for your quick response.
I'm afraid it doesn't solve my problem: I didn't say it in my original
mail, but GLX was already enabled (I have Exceed3D installed; checking
with xdpyinfo says that GLX is working)[1]. In fact, other applications
that use GLX work fine.
At least now I know, that previous versions of Exceed worked with
ParaView.
regards
Bernhard
>>>>> On Thu, 24 Feb 2005 12:40:02 +0100
>>>>> "AJA" == ALIZIER Julien AUSY <julien.alizier-ausy at irsn.fr> wrote:
AJA> Hi Bernhard, I have had a similar problem. The solution is to
AJA> enable GLX support in Exceed.
AJA> You need "Exceed 3D" (I think there are "3D" and "non-3D"
AJA> version of Exceed) : - right-click on Exceed taskbar button -
AJA> Select "Tools..." > "Configure..." - then select
AJA> "Protocols..." (the handshake icon) - then click on the
AJA> button "Extensions..." - Check both "GLX" checkboxes - OK ->
AJA> OK -> OK - open your remote session and try
AJA> I am using Exceed 3D 7.1, so the menu entries might be a bit
AJA> different
AJA> Regards,
AJA> -- Julien
AJA> -----Message d'origine----- De : Bernhard Gschaider
AJA> [mailto:Bernhard.Gschaider at unileoben.ac.at] Envoyé : jeudi 24
AJA> février 2005 10:21 À : paraview at paraview.org Objet :
AJA> [Paraview] Problem with remote display (Exceed)
AJA> I'm trying to run ParaView 1.8.5[1] on a Linux-machine. When
AJA> I start ParaView locally at the machine it works, but when I
AJA> start it over the Network (the DISPLAY is my Windows-machine
AJA> with Exceed 9.0) the Splash-Screen appears and then ParaView
AJA> stops. The only message in the Terminal is
AJA> [bgschaid at gcdw89 ~]$ paraview X Error of failed request:
AJA> BadRequest (invalid request code or no such operation) Major
AJA> opcode of failed request: 139 (GLX) Minor opcode of failed
AJA> request: 21 () Serial number of failed request: 1086 Current
AJA> serial number in output stream: 1086 [bgschaid at gcdw89 ~]$
AJA> I'm using the precompiled binaries.
AJA> Obviously there seems to be problem with
AJA> OpenGL-Acceleration. I tried the --use-software-rendering
AJA> switch, but this doesn't make any difference.
AJA> Is there a chance, that I can make this problem go away by
AJA> recompiling ParaView? Or is there any other way to fix this?
AJA> Footnotes: [1] The same thing happened with older versions
AJA> too.
Footnotes:
[1] If GLX is disabled ParaView gives a different error message:
Xlib: extension "GLX" missing on display
--
---------------------------------------------------------------------------
DI Bernhard F.W. Gschaider
Christian-Doppler-Labor f. Rechnergestützte Angewandte Thermofluiddynamik
Montanuniversität Leoben
---------------------------------------------------------------------------
Christian-Doppler-Laboratory f. Applied Computational Thermofluiddynamics
University of Leoben, Austria
---------------------------------------------------------------------------
EMail: Bernhard.Gschaider at unileoben.ac.at
WWW : www.cdlact.unileoben.ac.at
Tel: +43(3842)402-8205 Fax: +43(3842)402-8202
---------------------------------------------------------------------------
More information about the ParaView
mailing list