[ITK Community] [Insight-users] Fwd: [Community] Demons Deformable Registration and Paraview

[Tim Bhatnagar]

Hey Yago,

Thanks for the work you did for me!

For my work, it's not the actual visualization that I can't achieve.. it's
not being able to know (for certain) which 'direction' my displacement
field maps my data.

BUT, you don't seem to do any 'scaling' of your deformation field before
you visualize it in Paraview.. so is it safe to say that the
displacementfield.vtk file I output from my registration process, will be
visualized correctly (no need to 'flip' axes, etc) in Paraview? Even
knowing that for sure would definitely help!

Also, did you just generate a deformation field, or is it a result of a
registration process?

Thanks so much!

Tim


On Mon, Dec 9, 2013 at 8:42 AM, Yago Diez <yagodiezdonoso at gmail.com> wrote:

>
> Tim,
>
> I did a small test visualizing 2D deformation fields in paraview, I used
> .vtk files but .mhd files should also work fine.
>
> You can use paraview to visualize deformation fields.  You have a
> description on how to do this in the 8.15 section of the itk guide
> (Visualizing Deformation fields).
>
> Mainly you have to:
>
> 1) open the file with paraview
> 2) Open a calculator with the following formula:
>
> scalars_X*iHat+scalars_Y*jHat+0*kHat
>
> The idea here is to obtain a 3D vector with z component =0 and the other
> components the deformation components. For 3D you probably want to
> represent all components using something like (not tested!) ->
> scalars_X*iHat+scalars_Y*jHat+scalars_Z*kHat
>
> 3) In order to visualize this, you have to use a "gliph", here you can
> control the number of points that you represent and so on, you obtain
> something like the "campDefDemons" attached file.
>
> Hope this helps
> Yago
>
>
> On Sun, Dec 8, 2013 at 6:07 AM, Matt McCormick <matt.mccormick at kitware.com
> > wrote:
>
>> Hi Tim,
>>
>> On Sat, Dec 7, 2013 at 11:36 PM, Tim Bhatnagar <tim.bhatnagar at gmail.com>
>> wrote:
>> > Hey Matt,
>> >
>> > Sorry to re-visit this specific email... in your message, you said:
>> >
>> > "The displacement fields output of ITK's deformable image registration
>> > represent the displacement of a point in the FixedImage to a point in
>> > the MovingImage.  Therefore overlaying the displacement field vector
>> > glyphs on the FixedImage should give the correct visualization.  The
>> > start of the arrow sits on its location in the input FixedImage, and
>> > the tip of the arrow glyphs are directed towards where a given pixel
>> > in the FixedImage will move to in the MovingImage."
>> >
>> > However, in the Demons examples that are built with the ITK package, an
>> > 'output' image from the registration is produced by passing the
>> movingImage
>> > into the WarpImageFilter, and utilizing the newly created deformation
>> field.
>> > This makes it seem like the deformation field actually takes the
>> movingImage
>> > form into the fixedImage form, not the other way around.
>>
>> Yes, it is true that the WarpImageFilter takes the movingImage and
>> transforms it to the fixedImage space.  Different perspectives could
>> be taken on what is moving or how it is moving, but all of the above
>> is correct.
>>
>> Hope this helps,
>> Matt
>> _____________________________________
>> Powered by www.kitware.com
>>
>> Visit other Kitware open-source projects at
>> http://www.kitware.com/opensource/opensource.html
>>
>> Kitware offers ITK Training Courses, for more information visit:
>> http://www.kitware.com/products/protraining.php
>>
>> Please keep messages on-topic and check the ITK FAQ at:
>> http://www.itk.org/Wiki/ITK_FAQ
>>
>> Follow this link to subscribe/unsubscribe:
>> http://www.itk.org/mailman/listinfo/insight-users
>>
>
>
>
> _____________________________________
> Powered by www.kitware.com
>
> Visit other Kitware open-source projects at
> http://www.kitware.com/opensource/opensource.html
>
> Kitware offers ITK Training Courses, for more information visit:
> http://www.kitware.com/products/protraining.php
>
> Please keep messages on-topic and check the ITK FAQ at:
> http://www.itk.org/Wiki/ITK_FAQ
>
> Follow this link to subscribe/unsubscribe:
> http://www.itk.org/mailman/listinfo/insight-users
>
>


-- 
Tim Bhatnagar
PhD Candidate
Orthopaedic Injury Biomechanics Group
Department of Mechanical Engineering
University of British Columbia

Rm 5000 - 818 West 10th Ave.
Vancouver, BC
Canada
V5Z 1M9

Ph: (604) 675-8845
Fax: (604) 675-8820
Web: oibg.mech.ubc.ca
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://public.kitware.com/pipermail/community/attachments/20131209/3c728ba4/attachment.html>
-------------- next part --------------
_____________________________________
Powered by www.kitware.com

Visit other Kitware open-source projects at
http://www.kitware.com/opensource/opensource.html

Kitware offers ITK Training Courses, for more information visit:
http://www.kitware.com/products/protraining.php

Please keep messages on-topic and check the ITK FAQ at:
http://www.itk.org/Wiki/ITK_FAQ

Follow this link to subscribe/unsubscribe:
http://www.itk.org/mailman/listinfo/insight-users