[CMake] Fwd: Fwd: Help with CMAKE

Thu Mar 29 09:52:24 EDT 2012

I have installed the  Windows Platform SDK but the same error shows up:(
I didnt get what do you mean by :  Run CMake with --debug-trycompile

??
Thank you

On 28 March 2012 16:06, Aashish Chaudhary <aashish.chaudhary at kitware.com>wrote:

> Did not read the entire thread but.. based on your last email..
>
> I believe this is the page you need to go to:
>
> http://www.microsoft.com/download/en/default.aspx
>
> and then search for "windows sdk for windows 7" or "windows sdk for vista"
>
>
> On Wed, Mar 28, 2012 at 2:01 AM, Sweety Pie <sweetyp198612 at gmail.com>wrote:
>
>>
>> Any one can advice plz???
>>
>>
>> Yes the VC++ runs a simple code perfectly without the CMAKE
>> but I don't have the Microsoft Windows SDK   in the start menu and when i
>> checked this link
>>
>>
>> http://msdn.microsoft.com/en-us/library/windows/desktop/ms759194(v=vs.85).aspx
>>
>>
>> it says install the Core SDK which I didn't find there. Any ideas which
>> one shall I install??
>>
>>
>> On 28 March 2012 01:01, David Cole <david.cole at kitware.com> wrote:
>>
>>> In the Start menu, do you have a "Microsoft Windows SDK ..."?
>>>
>>> If not, install it.
>>>
>>> If so, please verify that you can build a simple hello world command
>>> line Win32 app WITHOUT CMake before trying to use CMake. CMake needs
>>> Visual Studio to be able to build a simple app before it can be
>>> useful.
>>>
>>>
>>> On Tue, Mar 27, 2012 at 3:17 PM, Sweety Pie <sweetyp198612 at gmail.com>
>>> wrote:
>>> > I have installed Cmake 2.8.7 but still the same error occures. How can
>>> I
>>> > know whether the corresponding Windows Platform
>>> > SDK installed is proper or not?
>>>
>>> >
>>> >
>>> >
>>> > On 27 March 2012 15:33, David Cole <david.cole at kitware.com> wrote:
>>> >>
>>> >> On Tue, Mar 27, 2012 at 4:37 AM, Sweety Pie <sweetyp198612 at gmail.com>
>>> >> wrote:
>>> >> > The visual studio runs perfectly but the compiler in the Cmake shows
>>> >> > this
>>> >> > error:
>>> >> >
>>> >> > Check for working C compiler using: Visual Studio 10
>>> >> >
>>> >> > Check for working C compiler using: Visual Studio 10 -- broken
>>> >> >
>>> >> > CMake Error at C:/Program Files (x86)/CMake
>>> >> > 2.8/share/cmake-2.8/Modules/CMakeTestCCompiler.cmake:52 (MESSAGE):
>>> >> >
>>> >> > The C compiler "cl" is not able to compile a simple test program.
>>> >> >
>>> >> > It fails with the following output:
>>> >> >
>>> >> > Change Dir: C:/Program Files (x86)/CGAL-3.8/CMakeFiles/CMakeTmp
>>> >> >
>>> >> > Run Build
>>> >> > Command:C:\Windows\Microsoft.NET\Framework\v4.0.30319\MSBuild.exe
>>> >> >
>>> >> > cmTryCompileExec.vcxproj /p:Configuration=Debug
>>> >> >
>>> >> > Microsoft (R) Build Engine Version 4.0.30319.1
>>> >> >
>>> >> > [Microsoft .NET Framework, Version 4.0.30319.261]
>>> >> >
>>> >> > Copyright (C) Microsoft Corporation 2007. All rights reserved.
>>> >> >
>>> >> > Build started 3/27/2012 11:04:22 AM.
>>> >> >
>>> >> > Project "C:\Program Files
>>> >> >
>>> >> > (x86)\CGAL-3.8\CMakeFiles\CMakeTmp\cmTryCompileExec.vcxproj" on
>>> node 1
>>> >> >
>>> >> > (default targets).
>>> >> >
>>> >> > InitializeBuildStatus:
>>> >> >
>>> >> > Creating
>>> "cmTryCompileExec.dir\Debug\cmTryCompileExec.unsuccessfulbuild"
>>> >> > because "AlwaysCreate" was specified.
>>> >> >
>>> >> > ClCompile:
>>> >> >
>>> >> > C:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\bin\CL.exe
>>> /c /Zi
>>> >> > /nologo /W3 /WX- /Od /Ob0 /Oy- /D WIN32 /D _WINDOWS /D _DEBUG /D
>>> >> > "CMAKE_INTDIR=\"Debug\"" /D _MBCS /Gm- /MDd /GS /fp:precise
>>> /Zc:wchar_t
>>> >> > /Zc:forScope /Fo"cmTryCompileExec.dir\Debug\\" /Fd"C:/Program Files
>>> >> > (x86)/CGAL-3.8/CMakeFiles/CMakeTmp/Debug/cmTryCompileExec.pdb" /Gd
>>> /TC
>>> >> > /analyze- /errorReport:queue testCCompiler.c /Zm1000 /GZ
>>> >> >
>>> >> > cl : Command line warning D9035: option 'GZ' has been deprecated and
>>> >> > will
>>> >> >
>>> >> > be removed in a future release [C:\Program Files
>>> >> >
>>> >> > (x86)\CGAL-3.8\CMakeFiles\CMakeTmp\cmTryCompileExec.vcxproj]
>>> >> >
>>> >> > cl : Command line warning D9036: use 'RTC1' instead of 'GZ'
>>> [C:\Program
>>> >> >
>>> >> > Files (x86)\CGAL-3.8\CMakeFiles\CMakeTmp\cmTryCompileExec.vcxproj]
>>> >> >
>>> >> > testCCompiler.c
>>> >> >
>>> >> > ManifestResourceCompile:
>>> >> >
>>> >> > C:\Program Files (x86)\Microsoft SDKs\Windows\v7.0A\bin\rc.exe
>>> /nologo
>>> >> >
>>> /fo"cmTryCompileExec.dir\Debug\cmTryCompileExec.exe.embed.manifest.res"
>>> >> > cmTryCompileExec.dir\Debug\cmTryCompileExec_manifest.rc
>>> >> >
>>> >> > Link:
>>> >> >
>>> >> > C:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\bin\link.exe
>>> >> > /ERRORREPORT:QUEUE /OUT:"C:\Program Files
>>> >> > (x86)\CGAL-3.8\CMakeFiles\CMakeTmp\Debug\cmTryCompileExec.exe"
>>> >> > /VERSION:"0.0" /INCREMENTAL /NOLOGO kernel32.lib user32.lib
>>> gdi32.lib
>>> >> > winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib
>>> >> > oleaut32.lib
>>> >> > uuid.lib odbc32.lib odbccp32.lib /MANIFEST
>>> >> >
>>> >> >
>>> /ManifestFile:"cmTryCompileExec.dir\Debug\cmTryCompileExec.exe.intermediate.manifest"
>>> >> > /MANIFESTUAC:"level='asInvoker' uiAccess='false'" /DEBUG
>>> >> > /PDB:"C:\Program
>>> >> > Files (x86)\CGAL-3.8\CMakeFiles\CMakeTmp\Debug\cmTryCompileExec.pdb"
>>> >> > /SUBSYSTEM:CONSOLE /STACK:"10000000" /TLBID:1 /DYNAMICBASE /NXCOMPAT
>>> >> > /IMPLIB:"C:/Program Files
>>> >> > (x86)/CGAL-3.8/CMakeFiles/CMakeTmp/Debug/cmTryCompileExec.lib"
>>> >> > /MACHINE:X86
>>> >> > cmTryCompileExec.dir\Debug\cmTryCompileExec.exe.embed.manifest.res
>>> >> >
>>> >> > cmTryCompileExec.dir\Debug\testCCompiler.obj /machine:X86 /debug
>>> >> >
>>> >> > LINK : fatal error LNK1104: cannot open file 'MSVCRTD.lib'
>>> [C:\Program
>>> >> >
>>> >> > Files (x86)\CGAL-3.8\CMakeFiles\CMakeTmp\cmTryCompileExec.vcxproj]
>>> >> >
>>> >> > Done Building Project "C:\Program Files
>>> >> >
>>> >> > (x86)\CGAL-3.8\CMakeFiles\CMakeTmp\cmTryCompileExec.vcxproj"
>>> (default
>>> >> >
>>> >> > targets) -- FAILED.
>>> >> >
>>> >> > Build FAILED.
>>> >> >
>>> >> > "C:\Program Files
>>> >> >
>>> >> > (x86)\CGAL-3.8\CMakeFiles\CMakeTmp\cmTryCompileExec.vcxproj"
>>> (default
>>> >> >
>>> >> > target) (1) ->
>>> >> >
>>> >> > (ClCompile target) ->
>>> >> >
>>> >> > cl : Command line warning D9035: option 'GZ' has been deprecated and
>>> >> > will be
>>> >> > removed in a future release [C:\Program Files
>>> >> > (x86)\CGAL-3.8\CMakeFiles\CMakeTmp\cmTryCompileExec.vcxproj]
>>> >> >
>>> >> > cl : Command line warning D9036: use 'RTC1' instead of 'GZ'
>>> [C:\Program
>>> >> > Files (x86)\CGAL-3.8\CMakeFiles\CMakeTmp\cmTryCompileExec.vcxproj]
>>> >> >
>>> >> > "C:\Program Files
>>> >> >
>>> >> > (x86)\CGAL-3.8\CMakeFiles\CMakeTmp\cmTryCompileExec.vcxproj"
>>> (default
>>> >> >
>>> >> > target) (1) ->
>>> >> >
>>> >> > (Link target) ->
>>> >> >
>>> >> > LINK : fatal error LNK1104: cannot open file 'MSVCRTD.lib'
>>> [C:\Program
>>> >> > Files
>>> >> > (x86)\CGAL-3.8\CMakeFiles\CMakeTmp\cmTryCompileExec.vcxproj]
>>> >> >
>>> >> > 2 Warning(s)
>>> >> >
>>> >> > 1 Error(s)
>>> >> >
>>> >> > Time Elapsed 00:00:01.62
>>> >> >
>>> >> > CMake will not be able to correctly generate this project.
>>> >> >
>>> >> > Call Stack (most recent call first):
>>> >> >
>>> >> > CMakeLists.txt:6 (project)
>>> >> >
>>> >> > Configuring incomplete, errors occurred!
>>> >> >
>>> >> >
>>> >> > On 25 March 2012 00:49, Sweety Pie <sweetyp198612 at gmail.com> wrote:
>>> >> >>
>>> >> >> I use CMake 2.8.4
>>> >> >> I have both installed but in the config of Cmake I choose this
>>> option:
>>> >> >> Visual Studio 10
>>> >> >> What is the windows platform SDK??
>>> >> >> Thank you for helping.
>>> >> >>
>>> >> >> On 24 March 2012 21:54, David Cole <david.cole at kitware.com> wrote:
>>> >> >>>
>>> >> >>> Can you build a non-cmake-generated "hello, world" project with
>>> VS 10?
>>> >> >>>
>>> >> >>> What version of CMake?
>>> >> >>> Is it the Express Edition of Visual Studio 10?
>>> >> >>> Do you have a Windows Platform SDK installed?
>>> >> >>>
>>> >> >>>
>>> >> >>> On Sat, Mar 24, 2012 at 1:55 PM, Sweety Pie <
>>> sweetyp198612 at gmail.com>
>>> >> >>> wrote:
>>> >> >>> >
>>> >> >>> >
>>> >> >>> > ---------- Forwarded message ----------
>>> >> >>> > From: Sweety Pie <sweetyp198612 at gmail.com>
>>> >> >>> > Date: 17 March 2012 19:53
>>> >> >>> > Subject: Help with CMAKE
>>> >> >>> > To: cmake at cmake.org
>>> >> >>> >
>>> >> >>> >
>>> >> >>> > Hey everyone,
>>> >> >>> > Am trying to use Cmake with Visual studio 10 to generate some
>>> .sln
>>> >> >>> > files.
>>> >> >>> > When I press on configure button am getting this error:
>>> >> >>> >
>>> >> >>> > CMake Error at C:/CMake
>>> >> >>> > 2.8/share/cmake-2.8/Modules/CMakeTestCCompiler.cmake:52
>>> (MESSAGE):
>>> >> >>> >
>>> >> >>> > The C compiler "cl" is not able to compile a simple test
>>> program.
>>> >> >>> >
>>> >> >>> > It fails with the following output:
>>> >> >>> >
>>> >> >>> > Change Dir: C:/CGAL-3.9/CMakeFiles/CMakeTmp
>>> >> >>> >
>>> >> >>> >
>>> >> >>> > "C:\CGAL-3.9\CMakeFiles\CMakeTmp\testCCompiler.c" /Zm1000
>>> >> >>> >
>>> >> >>> > 1>
>>> >> >>> >
>>> >> >>> > 1> testCCompiler.c
>>> >> >>> >
>>> >> >>> > 1>LINK : fatal error LNK1104: cannot open file 'MSVCRTD.lib'
>>> >> >>> >
>>> >> >>> > ========== Build: 0 succeeded, 1 failed, 0 up-to-date, 0 skipped
>>> >> >>> >
>>> >> >>> >
>>> >> >>> > Please help me. :(
>>> >> >>> >
>>> >> >>> >
>>> >> >>> > --
>>> >> >>> >
>>> >> >>> > Powered by www.kitware.com
>>> >> >>> >
>>> >> >>> > Visit other Kitware open-source projects at
>>> >> >>> > http://www.kitware.com/opensource/opensource.html
>>> >> >>> >
>>> >> >>> > Please keep messages on-topic and check the CMake FAQ at:
>>> >> >>> > http://www.cmake.org/Wiki/CMake_FAQ
>>> >> >>> >
>>> >> >>> > Follow this link to subscribe/unsubscribe:
>>> >> >>> > http://www.cmake.org/mailman/listinfo/cmake
>>> >>
>>> >>
>>> >>
>>> >> Please try CMake 2.8.7, or last week's 2.8.8-rc1... There have been
>>> >> several Visual Studio 10 related issues fixed since 2.8.4.
>>> >>
>>> >> Can you build a plain "hello, world" C++ command line executable with
>>> >> Visual Studio by itself, without CMake?
>>> >>
>>> >> This error looks like exactly what happens when people have VS 10
>>> >> Express installed, but do not have a corresponding Windows Platform
>>> >> SDK installed...
>>> >>
>>> >>
>>> >> HTH,
>>> >> David
>>> >
>>> >
>>>
>>
>>
>>
>> --
>>
>> Powered by www.kitware.com
>>
>> Visit other Kitware open-source projects at
>> http://www.kitware.com/opensource/opensource.html
>>
>> Please keep messages on-topic and check the CMake FAQ at:
>> http://www.cmake.org/Wiki/CMake_FAQ
>>
>> Follow this link to subscribe/unsubscribe:
>> http://www.cmake.org/mailman/listinfo/cmake
>>
>
>
>
> --
> | Aashish Chaudhary
> | R&D Engineer
> | Kitware Inc.
> | www.kitware.com
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.cmake.org/pipermail/cmake/attachments/20120329/42763726/attachment-0001.htm>