Difference between revisions of "VTK/Building/Windows"

From KitwarePublic
< VTK‎ | Building
Jump to navigationJump to search
(Bringing a bit more up to date, removing dead links)
Line 10: Line 10:


=== Step 2 - Download CMake ===
=== Step 2 - Download CMake ===
[http://cmake.org/HTML/Download.html Download CMake]. Choose the windows installer (cmake-x.y.z-win32.exe) and install it. Letting the cmake installer add itself to your patch will make it easier but is not required.
[http://cmake.org/HTML/Download.html Download CMake]. Choose the windows installer (cmake-x.y.z-win32.exe) and install it. Letting the cmake installer add itself to your path will make it easier but is not required.


=== Step 3 - Create a build folder ===
=== Step 3 - Create a build folder ===
Line 21: Line 21:
=== Step 4 - Run CMake ===
=== Step 4 - Run CMake ===


Start CMake, provide the source codes and binaries paths to CMake. Then press Configure button to let CMake read the CMakeLists.txt from the source path and configure the variables. In your case you should have:
Start CMake, provide the source codes and binaries paths to CMake. Then press the Configure button to let CMake read the CMakeLists.txt from the source path and configure the variables. In your case you should have:


  Where is the source code: C:\MyProjects\VTK-src
  Where is the source code: C:\MyProjects\VTK-src
  Where to build the binaries: C:\MyProjects\VTK-bin
  Where to build the binaries: C:\MyProjects\VTK-bin


Once you hit 'Configure', make sure to turn on:
CMake may prompt you for what generator to use. Select the version of Visual Studio that matches what you have installed on your machine. Once CMake finishes Configuring you will see a number of options that can be turned on or off. Adjust as desired, configure and then generate.
* BUILD_SHARED_LIBS
this causes the VTK dlls to be built.


=== Step 5 - Open the Visual Studio project===
=== Step 5 - Open the Visual Studio project===
Line 45: Line 43:
'''Be very careful if you have multiple VTK installed on your system that you are using the right one'''. It is strongly suggested that only one version of the VTK dll be on one system.
'''Be very careful if you have multiple VTK installed on your system that you are using the right one'''. It is strongly suggested that only one version of the VTK dll be on one system.


=== Step 7 - Manual building===
=== Step 7 - Manual building ===


When building your project if you don't use CMake, make sure that ''Additional Include Directories'' and ''Additional Library Directories'' (from within the Visual Studio interface) are pointing to the proper path of VTK-src
When building your project if you don't use CMake, make sure that ''Additional Include Directories'' and ''Additional Library Directories'' (from within the Visual Studio interface) are pointing to the proper path of VTK-src
Line 68: Line 66:


[[Image:INSTALLTarget.png|INSTALL Target]]
[[Image:INSTALLTarget.png|INSTALL Target]]
== Links ==
* [http://www2.imm.dtu.dk/pubdb/views/publication_details.php?id=502 Installing VTK 4.1.x on a windows PC]
* [http://www.spinet.pl/~wilku/vtk-howto/ How to build VTK with Java support on Windows]
* [http://www.duke.edu/~iwd/howto/VTK-Linux-Java_HOWTO.html Building VTK on Linux with Java support]

Revision as of 18:30, 3 April 2014

Building VTK on Windows using Visual Studio (from a zip/tar file)

Note: VTK uses the standard approach for building CMake based projects on Windows. If you are familiar with building projects on Windows using CMake then you can use your normal process. For information on other options such as msys, nmake, etc see the documentation associated with CMake.

Step 1 - Download VTK

Download VTK release you want from: [1] and unpack the archive (zip or tar.gz (Do NOT download the exe - this is not the VTK library.) ) into

C:\MyProjects\VTK-src

You will probably want the latest one (highest version number) unless you have a specific reason to use an older one.

Step 2 - Download CMake

Download CMake. Choose the windows installer (cmake-x.y.z-win32.exe) and install it. Letting the cmake installer add itself to your path will make it easier but is not required.

Step 3 - Create a build folder

Create a folder

C:\MyProjects\VTK-bin

This is where we will store the compiled binaries

Step 4 - Run CMake

Start CMake, provide the source codes and binaries paths to CMake. Then press the Configure button to let CMake read the CMakeLists.txt from the source path and configure the variables. In your case you should have:

Where is the source code: C:\MyProjects\VTK-src
Where to build the binaries: C:\MyProjects\VTK-bin

CMake may prompt you for what generator to use. Select the version of Visual Studio that matches what you have installed on your machine. Once CMake finishes Configuring you will see a number of options that can be turned on or off. Adjust as desired, configure and then generate.

Step 5 - Open the Visual Studio project

Start up visual studio and then open the VTK.sln in C:\MyProjects\VTK-bin and build it.

Step 6 - Install the project

Installation, the VTK dll will be in

C:\MyProjects\VTK-bin\bin\release

therefore by default the system cannot find them. You have the choice in either copying the dll to

c:\windows\system32

or change the environment variable PATH to include the path:

C:\MyProjects\VTK-bin\bin\release

Be very careful if you have multiple VTK installed on your system that you are using the right one. It is strongly suggested that only one version of the VTK dll be on one system.

Step 7 - Manual building

When building your project if you don't use CMake, make sure that Additional Include Directories and Additional Library Directories (from within the Visual Studio interface) are pointing to the proper path of VTK-src

Installing VTK

NOTE:

  • It is assumed that you have already built VTK. If not refer to previous section on how to build VTK.

Steps:

  1. Start CMake (CMakeSetup.exe).
  2. Configure VTK (select the correct binary directory in "Where to build the binaries").
  3. Select the proper path for "CMAKE_INSTALL_PREFIX". It should be something like : "C:/MY INSTALLATION/VTK"
  4. Click Configure
  5. Click "OK"
  6. Open Visual Studio, select the VTK.sln project from the binary directoy.
  7. Make sure that ALL_BUILD is the selected target. Build it. It should be a noop.
  8. Once this is done, select the "INSTALL" target. And build this target (eg. Right click on it, then Build this taget only). This will copy and the the correct permission for all the files needed to use VTK in the directory you have specified.


Visual Studio Solution Explorer

INSTALL Target