VTK/3DConnexion Devices Support
Support for 3DConnexion Devices (SpaceNavigator, SpaceExplorer, SpacePilot) inside VTK
THIS IS EXPERIMENTAL WORK
Date of Implementation
- 2009/08/21: experimental work (Linux and Windows)
- 2009/09/10: Qt on Windows, vtkTDxInteractorStyle(s)
- Support for Qt on Linux
- Support for Mac
We pick the name TDx to refer to classes or types to support 3DConnexion Devices. "T" stands for "Three", "x" stands for "connexion". Why? because 3DConnexion calls its software 3DxWare but we cannot have types and classes starting with a number in C++, so we chose "T" instead of "3".
- Linux: yes (tested with Ubuntu GNU/Linux 9.04 x86_64, gcc, with a 3DConnexion SpaceNavigator)
- Linux with Qt: not yet
- Windows: yes (tested with Windows Vista Ultimate SP2 64-bit, Visual Studio 9 SP1, with a 3DConnexion SpaceNavigator)
- Windows with Qt: yes
- Mac: not yet
- Mac with Qt: not yet
How to use it
Install the 3DConnexion Device driver
- Download the driver from the 3DConnexion wesbite: http://www.3dconnexion.com/support/downloads.php
- Select the product, (example SpaceNavigator SE),
- select the OS (Linux),
- select the driver file for the architecture (3DxWare for Linux (i386) for 32-bit, 3DxWare for Linux (x86_64) for 64-bit )
For example, for Linux 64-bit, we will get the 3 following files:
Install required packages
On Ubuntu, install package libmotif3. The GUI of the 3DConnexion device driver uses it.
Install the driver
As root, (from InstallationInstructions_Linux.txt):
- $ cd /tmp
- tar xzvf path/to/3dxware-linux-v1-4-3.x86_64.tar.gz
Then, you have to change to permissions of the installed files manually (ref [forum thread]) in /etc/3DxWare:
sudo chmod go+rx /etc/3DxWare sudo chmod go+r /etc/3DxWare/*.scg
Test the driver
Launch the daemon (with sudo):
sudo /etc/3DxWare/daemon/3dxsrv -d usb
The GUI is created but not on top of the desktop. Check for a 3DxWare window on your desktop.
If you forgot to change permissions of the installed files, we will have this error message:
$ sudo /etc/3DxWare/daemon/3dxsrv -d usb 3DxWareUNIX = V1.4.3 Device = SpaceNavigator Firmware = V3.18 [2009-08-19 12:01:28] Error: Can't find any configuration files! Please reinstall you configurations in /etc/3DxWare properly!
For testing/disgnostic purpose (for fun too), launch of one the programs provided in the archive (uncompressed in /tmp for the first step):
$ /tmp/xcube $ /tmp/xvalue
Easy. Nothing to add about it.
Easy. Nothing to add about it.
Install the 3DConnexion SDK
- Go the the 3DConnexion SDK webpage: http://www.3dconnexion.com/support/sdk.php
- Register, accept the license
- Download xdevelop.tgz
- Uncompress xdevelop.tgz wherever you want
$ tar xzvf xdevelop.tgz
- Prepare a Makefile for Linux from makefile.dec:
- a. cp makefile.dec makefile.linux
- b. edit makefile.linux and remove occurrences of -DDEC and -fullwarn . Add a -fPIC option to the build object section. Add a section to build a static library. To sum up, you end up with a makefile.linux file like (the big spaces at the beginning of lines are tabs, they must be tabs, not spaces):
all: xapp xdrvlib.a ls -al xapp xdrvlib.o: xdrvlib.c xdrvlib.h gcc xdrvlib.c -c -fPIC xdrvlib.a: xdrvlib.o ar rcs xdrvlib.a xdrvlib.o xapp: xapp.c xdrvlib.o gcc xapp.c xdrvlib.o -o xapp -lX11 -lm
- Build the static library:
# 3. make -f makefile.linux
the result of the build is xdrvlib.a. There is also an application xapp.
At this point, for testing/diagnostic purpose, you can try to launch xapp.
Easy. There is nothing more to install.
(This is because the Windows SDK (TDxInput.dll) installs when you install 3DxSoftware. You can find TDxInput.dll in ..\Program Files\3Dconnexion\3Dconnexion 3DxSoftware\3DxWare\win32 or \win64. )
Launch cmake and set the advanced option VTK_USE_TDx to TRUE
Set the advanced variables:
- VTK_TDX_INCLUDE_PATH to point to the path of xdrvlib.h (without mentioning xdrvlib.h)
- VTK_TDX_OBJECT_PATH to the full path to xdrvlib.a (mentioning xdrvlib.a)
Easy. There is nothing else to set.
Just build vtk.
Launch TestTDx in interactive mode
- 1. Get the full command line of the test with:
$ ctest -R TestTDx -V -N
- 2. Copy the full command line in the prompt and add -I at the end, to run the test in interactive mode
- 3. Enjoy
How to program it
Look at VTK/Rendering/Testing/Cxx/TestTDx.cxx for a sample code.
1. Once the vtkRenderWindowInteractor is created, tell it to listen to the device, when the event loop starts (must be called before the first render).
vtkRenderWindowInteractor *i=vtkRenderWindowInteractor::New(); i->SetUseTDx(true);
2. Add an observer to watch for a TDx event:
vtkCommand *c; [...] i->AddObserver(vtkCommand::TDxMotionEvent,c,0);
There are 3 types of events (defined in VTK/Common/vtkCommand.h), they all return some callData:
- vtkCommand::TDxMotionEvent, is invoked when the ball or knob is actived. the callData is a pointer to a vtkTDxMotionEventInfo (defined in VTK/Rendering). This structure stores information about a translation (X,Y,Z) and a rotation, represented by an angle and an axis (a unit vector). Tip: use VTK/Common/vtkTransform::RotateWXYZ() to convert an angle-axis representation to an orthogonal matrix representation of a rotation.
- vtkCommand::TDxButtonPressEvent, is invoked when a button is pressed. the callData is a pointer to a int, which is the number of the button.
- vtkCommand::TDxButtonReleaseEvent, is invoked when a button is released. the callData is a pointer to a int, which is the number of the button.