ParaView: Build And Install on Grid5000 testbed

From KitwarePublic
Revision as of 06:18, 3 July 2016 by Lokman (talk | contribs) (This wiki page describes steps to build and install ParaView with Catalyst on the Grid'5000 french testbed)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigationJump to search

Introduction

This wiki page describes steps to build and install ParaView with Catalyst on the Grid'5000 french testbed [www.grid5000.fr].

Build Configuration

The build configuration is the same one as in [1] and [2]

In an effort to ensure reproducibility Kameleon's Grid5000's community tool [3] is used. Level of reproducibility: - all the software are built and installed on a debian-7 wheezy image

- Grid'5000 offers reproducible images (configuration script available here [4])
- Grid'5000 allows the deployment of complete system images

- kameleon recipe available here - Software installed used apt-get is reproducible as far as the the apt-get source list is not changed - the new built image (with paraview installed) can be deployed to run experiments with

Build And Install

To build the image follow the steps described in kameleon's official documentation [5] and [6].

For build configuration specific to this recipe check [7]