|(27 intermediate revisions by 7 users not shown)|
== What is ParaView ? ==
ParaView is an open-source, multi-platform application for the visualization and analysis of scientific data sets, primarily those that are defined natively in a two- or three-dimensional space including those that extend into the temporal dimension.
The front end graphical user interface (GUI) has an open, flexible and intuitive user interface that still gives you fine grained and open ended control of the data manipulation and display processing needed to explore and present complex data as you see fit.
ParaView has extensive scripting and batch processing capabilities. The standard scripting interface uses the widely used python programming language for scripted control. As with the GUI, the python scripted control is easy to learn, notably including the ability to record actions in the GUI and save them out as succinct human readable python programs and powerful, including the ability to write scripted filters that run on the server that have access to every bit of your data on a large parallel machine.
ParaView's data processing and rendering components are built upon a scalable distributed-memory parallel architecture. This allows you to run ParaView on anything from a small netbook class machine up to the world largest supercomputers. The size of the data sets ParaView can handle varies widely depending on the architecture on which ParaView's server is run, but the client/server architecture of ParaView allows you control even the world's largest visualization tasks from your own personal computer.
ParaView is meant to be easily extended and customized into new applications and be used by or make use of other tools. Correspondingly there are a number of different interfaces to ParaView's data processing and visualization engine, for example [http://www.paraview.org/Wiki/ParaViewWeb ParaViewWeb] a web based one. This book will not cover any of those or describe in great detail the programmers interface to the ParaView engine. We will instead focus our attention on undertstanding the standard ParaView GUI based application.
== User Interface ==
The different sections of ParaView's Graphical User Interface (GUI) are shown below. Of particular importance in the following discussion are the File and Filter menus which allow one to open files and manipulate data, the Pipeline Browser which displays the Visualization Pipeline, the Object Inspector with its Properties, Display and Information tabs where one can control any given module within the pipeline, and the View area where data is displayed in one or more windows.
=== Modality ===
One very important thing to keep in mind when using ParaView is that the GUI is very modal. At any given time you will have one "active" module within the Visualization Pipeline, one "active" View, and one "active" Selection. For example when you click on the name of a reader or source within the Pipeline Browser, it becomes the active module and the properties of that filter are displayed in the Object Inspector. Likewise when you click within a different View, that view becomes the Active View and the visibility "eye" icons in the Pipeline Browser are changed to show what filters are displayed within this View. These concepts will be described in detail in later chapters
[http://paraview.org/Wiki/ParaView/Displaying_Data#Multiple_Views][http://paraview.org/Wiki/ParaView/UsersGuide/Filtering_Data#Pipeline_Basics][http://paraview.org/Wiki/ParaView/Users_Guide/Selection]. For now you should be aware that the information displayed in the GUI always pertains to these active entities.
== Basics of Visualization ==
Put simply, the process of visualization is taking raw data and converting it to a form that is viewable and understandable to humans. This allows us to get a better cognitive understanding of our data. Scientific visualization is specifically concerned with the type of data that has a well-defined representation in 2D or 3D space. Data that comes from simulation meshes and scanner data is well suited for this type of analysis.
There are three basic steps to visualizing your data: reading, filtering, and rendering. First, your data must be read into ParaView. Next, you may apply any number of filters that process the data to generate, extract, or derive features from the data. Finally, a viewable image is rendered from the data and you can then change the viewing parameters or rendering modality for best visual effect.
== The Pipeline Concept ==
In ParaView, these steps are made manifest in a Visualization Pipeline. That is one visualizes data by building up a set of modules, each of which takes in some data, operates on it, and presents the result as a new dataset. This begins with a Reader module who‚Äôs task it is to ingest data off of files on disk.
<nowiki>Reading data into ParaView is often as simple as selecting Open from the File menu, and then clicking the glowing ‚ÄúAccept‚Äù button on the reader‚Äôs Object Inspector tab. ParaView comes with support for a large number of file formats, and its modular architecture makes it possible to add new file readers. See chapter <OPEN, READERS and WRITING NEW READERS> chapters for more information.</nowiki>
Once a file is read into ParaView, it will automatically be rendered in a View. In ParaView, a View is simply a window that shows data. There are different types of Views, ranging from qualitative computer graphics rendering of the data to quantitative spreadsheet presentations of the data values as text. ParaView picks a suitable view type for your data automatically, but you are free to modify the rendering parameters, change the view type and even create new views simultaneously as you see fit to better understand what you‚Äôve read in. Additionally, high level meta information about the data including names, types and ranges of arrays, temporal ranges, memory size and geometric extent can be found in the Information Tab, which we will discuss below.
One can learn a great deal about a given dataset with a one element Visualization Pipeline consisting of just a reader module. You can learn much more, and in fact perform arbitrarily complex analyses and data manipulations, by adding modules to the pipeline. In ParaView you can create arbitrarily complex visualization pipelines, including multiple readers, and merging and branching pipelines, by working with the Pipeline Inspector and Object Inspectors to add each module that you want in turn.
The Pipeline Browser is where the overall Visualization Pipeline is displayed and controllable from. The Object Inspector is where the specific parameters of one particular module within the Pipeline are displayed and controllable from. The Object inspector has three tabs, one presents the parameters of the processing done within that module, another presents the parameters of how the output of that module will be displayed in a View, the last presents the meta information about the data produced by the module as described above.
To add modules to the Visualization Pipeline, begin by selecting one or more modules in the pipeline inspector, the reader module for example. Next select the entry in the Filters menu that corresponds to the manipulation that you want to perform. Selecting a filter adds a new element to the Pipeline Browser and updates the Object Inspector to work with it. Change any of the parameters you need and then click accept to make it happen. Now the new data produced by the new filter will now be visible in the View.
<nowiki>There are more than one hundred filters available to choose from in total, all of which manipulate the data in different ways. The full list of filters is available in chapter <FILTER LIST CHAPTER> and within the application under the help menu<SPECIFIC LOCATION IN NEW HELP>. Note that many of the filters in the menu will be grayed out and not selectable at any given time. That is because any given filter may only operate on particular types of data. For example the <FILTER NAME> will only operate on <DATA TYPE> data so it is only enabled when the module you are building on top of produces <DATA TYPE> data. In this situation you can often find a similar filter which does accept your data, or apply a filter which transforms you data into the required format. The mechanics of applying filters are described fully in Chapter <FILTER CHAPTER>.</nowiki>
== Making Mistakes ==
Frequently, new users of ParaView falter when they open their data, or apply a filter, and do not see it because they have not pressed the Accept button. Because ParaView is designed to operate on large data sets, for which any given operation could takes several minutes to perform, the apply button gives you a chance to make sure your change makes sense before it takes effect. The highlighted button is a reminder that the parameters of one or more pipeline objects are ``out of sync'' with the data that you are viewing. <nowiki>Hitting the Apply button accepts your change (or changes) whereas hitting the Reset button will revert the options back to the last time they were applied. If you are working with small data sets, feel free to turn off this behavior with the <INSERT PATH TO AUTO_APPLY OPTION>.</nowiki>
<nowiki>The apply behavior prevents a great number of mistakes but certainly not all of them. If you make apply some change to a filter or to the data processing pipeline itself and find that you are not satisfied with the result, you may undo your change with the Undo button. You can undo all the way back to the start of your ParaView session and redo all the way forward if you like. <INSERT PATH TO UNDO/REDO>. You can also undo and redo camera motion by using the camera undo and redo buttons located above each View window.</nowiki>
== Persistent Sessions ==
<nowiki>If on the other hand you are satisfied with your visualization results, you may want to save off the session so that you can return to it at some future time. You can do so by using ParaView‚Äôs Save State and Save Trace features. In either case, ParaView produces human readable text files (XML files for State and Python Scripts for Trace) that can be modified and played later. This is very useful for batch processing, which is discussed in chapter <BATCH PROCESSING AND SCRIPTING CHAPTERS>.</nowiki>
To save state means to save enough information about the ParaView session to restore it later and thus show exactly the same result. ParaView does so by saving the current visualization pipeline and the parameters of the filters within it.
<nowiki>If you turn on a trace recording when you first start using ParaView, saving a trace can be used for the same purpose as saving state. However, a trace records all of your actions, including the ones that you later undo, as you do them. It is a more exact recording then of not only what you did, but how you did it. Traces are saved as python scripts, which ParaView can play back in either batch mode or within an interactive GUI session. You can use traces then to automate repetitive tasks by recording just that action. It is also an ideal tool to learn ParaView‚Äôs python scripting API. <REFERENCE SCRIPTING CHAPTER></nowiki>
== Client/ Server Visualization ==
With small datasets it is usually quite sufficient to run ParaView as a single process on a small laptop or desktop class machine. For large data sets, a single machine is not likely to have enough processing power and much more importantly memory to process the data. In this situation one runs an MPI parallel ParaView Server process <nowiki>on a large machine to do computationally and memory expensive data processing and optionally rendering tasks and then connects to that with the familiar GUI application. In this mode the only differences you will see will be that the Visualization Pipeline displayed in the Pipeline Browser will begin with the name of the server you are connected to rather than the word ‚Äúbuiltin‚Äù which indicates that you are connected to a virtual server that lives within the same process as the client‚Äôs GUI. When connected to a remote server, the File Open dialog presents the list of files that live on the remote machine‚Äôs file system rather than the client‚Äôs. In this mode data can will be rendered by either the remote system or the local machine based dependent on the memory requirements of the visible data. Large data visualization is described fully in Chapter <REMOTE VIS CHAPTER>.</ nowiki>