CMake 2.8.2 Docs: Difference between revisions

From KitwarePublic
Jump to navigationJump to search
(Created page with "<pre> cmake version 2.8.2 ------------------------------------------------------------------------------ Name cmake - Cross-Platform Makefile Generator. ---------------------...")
 
(Replaced content with "See https://cmake.org/cmake/help/v2.8.2/cmake.html")
 
Line 1: Line 1:
<pre>
See https://cmake.org/cmake/help/v2.8.2/cmake.html
cmake version 2.8.2
------------------------------------------------------------------------------
Name
 
  cmake - Cross-Platform Makefile Generator.
 
------------------------------------------------------------------------------
Usage
 
  cmake [options] <path-to-source>
  cmake [options] <path-to-existing-build>
 
------------------------------------------------------------------------------
Description
 
The "cmake" executable is the CMake command-line interface.  It may be used
to configure projects in scripts.  Project configuration settings may be
specified on the command line with the -D option.  The -i option will cause
cmake to interactively prompt for such settings.
 
CMake is a cross-platform build system generator.  Projects specify their
build process with platform-independent CMake listfiles included in each
directory of a source tree with the name CMakeLists.txt.  Users build a
project by using CMake to generate a build system for a native tool on their
platform.
 
------------------------------------------------------------------------------
Options
 
  -C <initial-cache>
      Pre-load a script to populate the cache.
 
      When cmake is first run in an empty build tree, it creates a
      CMakeCache.txt file and populates it with customizable settings for
      the project.  This option may be used to specify a file from which to
      load cache entries before the first pass through the project's cmake
      listfiles.  The loaded entries take priority over the project's
      default values.  The given file should be a CMake script containing
      SET commands that use the CACHE option, not a cache-format file.
 
  -D <var>:<type>=<value>
      Create a cmake cache entry.
 
      When cmake is first run in an empty build tree, it creates a
      CMakeCache.txt file and populates it with customizable settings for
      the project.  This option may be used to specify a setting that takes
      priority over the project's default value.  The option may be repeated
      for as many cache entries as desired.
 
  -U <globbing_expr>
      Remove matching entries from CMake cache.
 
      This option may be used to remove one or more variables from the
      CMakeCache.txt file, globbing expressions using * and ? are supported.
      The option may be repeated for as many cache entries as desired.
 
      Use with care, you can make your CMakeCache.txt non-working.
 
  -G <generator-name>
      Specify a makefile generator.
 
      CMake may support multiple native build systems on certain platforms.
      A makefile generator is responsible for generating a particular build
      system.  Possible generator names are specified in the Generators
      section.
 
  -Wno-dev
      Suppress developer warnings.
 
      Suppress warnings that are meant for the author of the CMakeLists.txt
      files.
 
  -Wdev
      Enable developer warnings.
 
      Enable warnings that are meant for the author of the CMakeLists.txt
      files.
 
  -E
      CMake command mode.
 
      For true platform independence, CMake provides a list of commands that
      can be used on all systems.  Run with -E help for the usage
      information.  Commands available are: chdir, copy, copy_if_different
      copy_directory, compare_files, echo, echo_append, environment,
      make_directory, md5sum, remove_directory, remove, tar, time, touch,
      touch_nocreate, write_regv, delete_regv, comspec, create_symlink.
 
  -i
      Run in wizard mode.
 
      Wizard mode runs cmake interactively without a GUI.  The user is
      prompted to answer questions about the project configuration.  The
      answers are used to set cmake cache values.
 
  -L[A][H]
      List non-advanced cached variables.
 
      List cache variables will run CMake and list all the variables from
      the CMake cache that are not marked as INTERNAL or ADVANCED.  This
      will effectively display current CMake settings, which can be then
      changed with -D option.  Changing some of the variable may result in
      more variables being created.  If A is specified, then it will display
      also advanced variables.  If H is specified, it will also display help
      for each variable.
 
  --build <dir>
      Build a CMake-generated project binary tree.
 
      This abstracts a native build tool's command-line interface with the
      following options:
 
        <dir>          = Project binary directory to be built.
        --target <tgt> = Build <tgt> instead of default targets.
        --config <cfg> = For multi-configuration tools, choose <cfg>.
        --clean-first  = Build target 'clean' first, then build.
                          (To clean only, use --target 'clean'.)
        --            = Pass remaining options to the native tool.
 
      Run cmake --build with no options for quick help.
 
  -N
      View mode only.
 
      Only load the cache.  Do not actually run configure and generate
      steps.
 
  -P <file>
      Process script mode.
 
      Process the given cmake file as a script written in the CMake
      language.  No configure or generate step is performed and the cache is
      not modified.  If variables are defined using -D, this must be done
      before the -P argument.
 
  --graphviz=[file]
      Generate graphviz of dependencies.
 
      Generate a graphviz input file that will contain all the library and
      executable dependencies in the project.
 
  --system-information [file]
      Dump information about this system.
 
      Dump a wide range of information about the current system.  If run
      from the top of a binary tree for a CMake project it will dump
      additional information such as the cache, log files etc.
 
  --debug-trycompile
      Do not delete the try compile directories..
 
      Do not delete the files and directories created for try_compile calls.
      This is useful in debugging failed try_compiles.  It may however
      change the results of the try-compiles as old junk from a previous
      try-compile may cause a different test to either pass or fail
      incorrectly.  This option is best used for one try-compile at a time,
      and only when debugging.
 
  --debug-output
      Put cmake in a debug mode.
 
      Print extra stuff during the cmake run like stack traces with
      message(send_error ) calls.
 
  --trace
      Put cmake in trace mode.
 
      Print a trace of all calls made and from where with message(send_error
      ) calls.
 
  --help-command cmd [file]
      Print help for a single command and exit.
 
      Full documentation specific to the given command is displayed.  If a
      file is specified, the documentation is written into and the output
      format is determined depending on the filename suffix.  Supported are
      man page, HTML, DocBook and plain text.
 
  --help-command-list [file]
      List available listfile commands and exit.
 
      The list contains all commands for which help may be obtained by using
      the --help-command argument followed by a command name.  If a file is
      specified, the documentation is written into and the output format is
      determined depending on the filename suffix.  Supported are man page,
      HTML, DocBook and plain text.
 
  --help-commands [file]
      Print help for all commands and exit.
 
      Full documentation specific for all current command is displayed.If a
      file is specified, the documentation is written into and the output
      format is determined depending on the filename suffix.  Supported are
      man page, HTML, DocBook and plain text.
 
  --help-compatcommands [file]
      Print help for compatibility commands.
 
      Full documentation specific for all compatibility commands is
      displayed.If a file is specified, the documentation is written into
      and the output format is determined depending on the filename suffix.
      Supported are man page, HTML, DocBook and plain text.
 
  --help-module module [file]
      Print help for a single module and exit.
 
      Full documentation specific to the given module is displayed.If a file
      is specified, the documentation is written into and the output format
      is determined depending on the filename suffix.  Supported are man
      page, HTML, DocBook and plain text.
 
  --help-module-list [file]
      List available modules and exit.
 
      The list contains all modules for which help may be obtained by using
      the --help-module argument followed by a module name.  If a file is
      specified, the documentation is written into and the output format is
      determined depending on the filename suffix.  Supported are man page,
      HTML, DocBook and plain text.
 
  --help-modules [file]
      Print help for all modules and exit.
 
      Full documentation for all modules is displayed.  If a file is
      specified, the documentation is written into and the output format is
      determined depending on the filename suffix.  Supported are man page,
      HTML, DocBook and plain text.
 
  --help-custom-modules [file]
      Print help for all custom modules and exit.
 
      Full documentation for all custom modules is displayed.  If a file is
      specified, the documentation is written into and the output format is
      determined depending on the filename suffix.  Supported are man page,
      HTML, DocBook and plain text.
 
  --help-policy cmp [file]
      Print help for a single policy and exit.
 
      Full documentation specific to the given policy is displayed.If a file
      is specified, the documentation is written into and the output format
      is determined depending on the filename suffix.  Supported are man
      page, HTML, DocBook and plain text.
 
  --help-policies [file]
      Print help for all policies and exit.
 
      Full documentation for all policies is displayed.If a file is
      specified, the documentation is written into and the output format is
      determined depending on the filename suffix.  Supported are man page,
      HTML, DocBook and plain text.
 
  --help-property prop [file]
      Print help for a single property and exit.
 
      Full documentation specific to the given property is displayed.If a
      file is specified, the documentation is written into and the output
      format is determined depending on the filename suffix.  Supported are
      man page, HTML, DocBook and plain text.
 
  --help-property-list [file]
      List available properties and exit.
 
      The list contains all properties for which help may be obtained by
      using the --help-property argument followed by a property name.  If a
      file is specified, the help is written into it.If a file is specified,
      the documentation is written into and the output format is determined
      depending on the filename suffix.  Supported are man page, HTML,
      DocBook and plain text.
 
  --help-properties [file]
      Print help for all properties and exit.
 
      Full documentation for all properties is displayed.If a file is
      specified, the documentation is written into and the output format is
      determined depending on the filename suffix.  Supported are man page,
      HTML, DocBook and plain text.
 
  --help-variable var [file]
      Print help for a single variable and exit.
 
      Full documentation specific to the given variable is displayed.If a
      file is specified, the documentation is written into and the output
      format is determined depending on the filename suffix.  Supported are
      man page, HTML, DocBook and plain text.
 
  --help-variable-list [file]
      List documented variables and exit.
 
      The list contains all variables for which help may be obtained by
      using the --help-variable argument followed by a variable name.  If a
      file is specified, the help is written into it.If a file is specified,
      the documentation is written into and the output format is determined
      depending on the filename suffix.  Supported are man page, HTML,
      DocBook and plain text.
 
  --help-variables [file]
      Print help for all variables and exit.
 
      Full documentation for all variables is displayed.If a file is
      specified, the documentation is written into and the output format is
      determined depending on the filename suffix.  Supported are man page,
      HTML, DocBook and plain text.
 
  --copyright [file]
      Print the CMake copyright and exit.
 
      If a file is specified, the copyright is written into it.
 
  --help
      Print usage information and exit.
 
      Usage describes the basic command line interface and its options.
 
  --help-full [file]
      Print full help and exit.
 
      Full help displays most of the documentation provided by the UNIX man
      page.  It is provided for use on non-UNIX platforms, but is also
      convenient if the man page is not installed.  If a file is specified,
      the help is written into it.
 
  --help-html [file]
      Print full help in HTML format.
 
      This option is used by CMake authors to help produce web pages.  If a
      file is specified, the help is written into it.
 
  --help-man [file]
      Print full help as a UNIX man page and exit.
 
      This option is used by the cmake build to generate the UNIX man page.
      If a file is specified, the help is written into it.
 
  --version [file]
      Show program name/version banner and exit.
 
      If a file is specified, the version is written into it.
 
------------------------------------------------------------------------------
Generators
 
The following generators are available on this platform:
 
  Unix Makefiles
      Generates standard UNIX makefiles.
 
      A hierarchy of UNIX makefiles is generated into the build tree.  Any
      standard UNIX-style make program can build the project through the
      default make target.  A "make install" target is also provided.
 
  CodeBlocks - Unix Makefiles
      Generates CodeBlocks project files.
 
      Project files for CodeBlocks will be created in the top directory and
      in every subdirectory which features a CMakeLists.txt file containing
      a PROJECT() call.  Additionally a hierarchy of makefiles is generated
      into the build tree.  The appropriate make program can build the
      project through the default make target.  A "make install" target is
      also provided.
 
  Eclipse CDT4 - Unix Makefiles
      Generates Eclipse CDT 4.0 project files.
 
      Project files for Eclipse will be created in the top directory.  In
      out of source builds, a linked resource to the top level source
      directory will be created.Additionally a hierarchy of makefiles is
      generated into the build tree.  The appropriate make program can build
      the project through the default make target.  A "make install" target
      is also provided.
 
  KDevelop3
      Generates KDevelop 3 project files.
 
      Project files for KDevelop 3 will be created in the top directory and
      in every subdirectory which features a CMakeLists.txt file containing
      a PROJECT() call.  If you change the settings using KDevelop cmake
      will try its best to keep your changes when regenerating the project
      files.  Additionally a hierarchy of UNIX makefiles is generated into
      the build tree.  Any standard UNIX-style make program can build the
      project through the default make target.  A "make install" target is
      also provided.
 
  KDevelop3 - Unix Makefiles
      Generates KDevelop 3 project files.
 
      Project files for KDevelop 3 will be created in the top directory and
      in every subdirectory which features a CMakeLists.txt file containing
      a PROJECT() call.  If you change the settings using KDevelop cmake
      will try its best to keep your changes when regenerating the project
      files.  Additionally a hierarchy of UNIX makefiles is generated into
      the build tree.  Any standard UNIX-style make program can build the
      project through the default make target.  A "make install" target is
      also provided.
 
------------------------------------------------------------------------------
Commands
 
  add_custom_command
      Add a custom build rule to the generated build system.
 
      There are two main signatures for add_custom_command The first
      signature is for adding a custom command to produce an output.
 
        add_custom_command(OUTPUT output1 [output2 ...]
                            COMMAND command1 [ARGS] [args1...]
                            [COMMAND command2 [ARGS] [args2...] ...]
                            [MAIN_DEPENDENCY depend]
                            [DEPENDS [depends...]]
                            [IMPLICIT_DEPENDS <lang1> depend1 ...]
                            [WORKING_DIRECTORY dir]
                            [COMMENT comment] [VERBATIM] [APPEND])
 
      This defines a command to generate specified OUTPUT file(s).  A target
      created in the same directory (CMakeLists.txt file) that specifies any
      output of the custom command as a source file is given a rule to
      generate the file using the command at build time.  If an output name
      is a relative path it will be interpreted relative to the build tree
      directory corresponding to the current source directory.  Note that
      MAIN_DEPENDENCY is completely optional and is used as a suggestion to
      visual studio about where to hang the custom command.  In makefile
      terms this creates a new target in the following form:
 
        OUTPUT: MAIN_DEPENDENCY DEPENDS
                COMMAND
 
      If more than one command is specified they will be executed in order.
      The optional ARGS argument is for backward compatibility and will be
      ignored.
 
      The second signature adds a custom command to a target such as a
      library or executable.  This is useful for performing an operation
      before or after building the target.  The command becomes part of the
      target and will only execute when the target itself is built.  If the
      target is already built, the command will not execute.
 
        add_custom_command(TARGET target
                            PRE_BUILD | PRE_LINK | POST_BUILD
                            COMMAND command1 [ARGS] [args1...]
                            [COMMAND command2 [ARGS] [args2...] ...]
                            [WORKING_DIRECTORY dir]
                            [COMMENT comment] [VERBATIM])
 
      This defines a new command that will be associated with building the
      specified target.  When the command will happen is determined by which
      of the following is specified:
 
        PRE_BUILD - run before all other dependencies
        PRE_LINK - run after other dependencies
        POST_BUILD - run after the target has been built
 
      Note that the PRE_BUILD option is only supported on Visual Studio 7 or
      later.  For all other generators PRE_BUILD will be treated as
      PRE_LINK.
 
      If WORKING_DIRECTORY is specified the command will be executed in the
      directory given.  If COMMENT is set, the value will be displayed as a
      message before the commands are executed at build time.  If APPEND is
      specified the COMMAND and DEPENDS option values are appended to the
      custom command for the first output specified.  There must have
      already been a previous call to this command with the same output.
      The COMMENT, WORKING_DIRECTORY, and MAIN_DEPENDENCY options are
      currently ignored when APPEND is given, but may be used in the future.
 
      If VERBATIM is given then all arguments to the commands will be
      escaped properly for the build tool so that the invoked command
      receives each argument unchanged.  Note that one level of escapes is
      still used by the CMake language processor before add_custom_command
      even sees the arguments.  Use of VERBATIM is recommended as it enables
      correct behavior.  When VERBATIM is not given the behavior is platform
      specific because there is no protection of tool-specific special
      characters.
 
      If the output of the custom command is not actually created as a file
      on disk it should be marked as SYMBOLIC with
      SET_SOURCE_FILES_PROPERTIES.
 
      The IMPLICIT_DEPENDS option requests scanning of implicit dependencies
      of an input file.  The language given specifies the programming
      language whose corresponding dependency scanner should be used.
      Currently only C and CXX language scanners are supported.
      Dependencies discovered from the scanning are added to those of the
      custom command at build time.  Note that the IMPLICIT_DEPENDS option
      is currently supported only for Makefile generators and will be
      ignored by other generators.
 
      If COMMAND specifies an executable target (created by ADD_EXECUTABLE)
      it will automatically be replaced by the location of the executable
      created at build time.  Additionally a target-level dependency will be
      added so that the executable target will be built before any target
      using this custom command.  However this does NOT add a file-level
      dependency that would cause the custom command to re-run whenever the
      executable is recompiled.
 
      The DEPENDS option specifies files on which the command depends.  If
      any dependency is an OUTPUT of another custom command in the same
      directory (CMakeLists.txt file) CMake automatically brings the other
      custom command into the target in which this command is built.  If
      DEPENDS specifies any target (created by an ADD_* command) a
      target-level dependency is created to make sure the target is built
      before any target using this custom command.  Additionally, if the
      target is an executable or library a file-level dependency is created
      to cause the custom command to re-run whenever the target is
      recompiled.
 
 
  add_custom_target
      Add a target with no output so it will always be built.
 
        add_custom_target(Name [ALL] [command1 [args1...]]
                          [COMMAND command2 [args2...] ...]
                          [DEPENDS depend depend depend ... ]
                          [WORKING_DIRECTORY dir]
                          [COMMENT comment] [VERBATIM]
                          [SOURCES src1 [src2...]])
 
      Adds a target with the given name that executes the given commands.
      The target has no output file and is ALWAYS CONSIDERED OUT OF DATE
      even if the commands try to create a file with the name of the target.
      Use ADD_CUSTOM_COMMAND to generate a file with dependencies.  By
      default nothing depends on the custom target.  Use ADD_DEPENDENCIES to
      add dependencies to or from other targets.  If the ALL option is
      specified it indicates that this target should be added to the default
      build target so that it will be run every time (the command cannot be
      called ALL).  The command and arguments are optional and if not
      specified an empty target will be created.  If WORKING_DIRECTORY is
      set, then the command will be run in that directory.  If COMMENT is
      set, the value will be displayed as a message before the commands are
      executed at build time.  Dependencies listed with the DEPENDS argument
      may reference files and outputs of custom commands created with
      add_custom_command() in the same directory (CMakeLists.txt file).
 
      If VERBATIM is given then all arguments to the commands will be
      escaped properly for the build tool so that the invoked command
      receives each argument unchanged.  Note that one level of escapes is
      still used by the CMake language processor before add_custom_target
      even sees the arguments.  Use of VERBATIM is recommended as it enables
      correct behavior.  When VERBATIM is not given the behavior is platform
      specific because there is no protection of tool-specific special
      characters.
 
      The SOURCES option specifies additional source files to be included in
      the custom target.  Specified source files will be added to IDE
      project files for convenience in editing even if they have not build
      rules.
 
  add_definitions
      Adds -D define flags to the compilation of source files.
 
        add_definitions(-DFOO -DBAR ...)
 
      Adds flags to the compiler command line for sources in the current
      directory and below.  This command can be used to add any flags, but
      it was originally intended to add preprocessor definitions.  Flags
      beginning in -D or /D that look like preprocessor definitions are
      automatically added to the COMPILE_DEFINITIONS property for the
      current directory.  Definitions with non-trival values may be left in
      the set of flags instead of being converted for reasons of backwards
      compatibility.  See documentation of the directory, target, and source
      file COMPILE_DEFINITIONS properties for details on adding preprocessor
      definitions to specific scopes and configurations.
 
  add_dependencies
      Add a dependency between top-level targets.
 
        add_dependencies(target-name depend-target1
                          depend-target2 ...)
 
      Make a top-level target depend on other top-level targets.  A
      top-level target is one created by ADD_EXECUTABLE, ADD_LIBRARY, or
      ADD_CUSTOM_TARGET.  Adding dependencies with this command can be used
      to make sure one target is built before another target.  See the
      DEPENDS option of ADD_CUSTOM_TARGET and ADD_CUSTOM_COMMAND for adding
      file-level dependencies in custom rules.  See the OBJECT_DEPENDS
      option in SET_SOURCE_FILES_PROPERTIES to add file-level dependencies
      to object files.
 
  add_executable
      Add an executable to the project using the specified source files.
 
        add_executable(<name> [WIN32] [MACOSX_BUNDLE]
                        [EXCLUDE_FROM_ALL]
                        source1 source2 ... sourceN)
 
      Adds an executable target called <name> to be built from the source
      files listed in the command invocation.  The <name> corresponds to the
      logical target name and must be globally unique within a project.  The
      actual file name of the executable built is constructed based on
      conventions of the native platform (such as <name>.exe or just
      <name>).
 
      By default the executable file will be created in the build tree
      directory corresponding to the source tree directory in which the
      command was invoked.  See documentation of the
      RUNTIME_OUTPUT_DIRECTORY target property to change this location.  See
      documentation of the OUTPUT_NAME target property to change the <name>
      part of the final file name.
 
      If WIN32 is given the property WIN32_EXECUTABLE will be set on the
      target created.  See documentation of that target property for
      details.
 
      If MACOSX_BUNDLE is given the corresponding property will be set on
      the created target.  See documentation of the MACOSX_BUNDLE target
      property for details.
 
      If EXCLUDE_FROM_ALL is given the corresponding property will be set on
      the created target.  See documentation of the EXCLUDE_FROM_ALL target
      property for details.
 
      The add_executable command can also create IMPORTED executable targets
      using this signature:
 
        add_executable(<name> IMPORTED)
 
      An IMPORTED executable target references an executable file located
      outside the project.  No rules are generated to build it.  The target
      name has scope in the directory in which it is created and below.  It
      may be referenced like any target built within the project.  IMPORTED
      executables are useful for convenient reference from commands like
      add_custom_command.  Details about the imported executable are
      specified by setting properties whose names begin in "IMPORTED_".  The
      most important such property is IMPORTED_LOCATION (and its
      per-configuration version IMPORTED_LOCATION_<CONFIG>) which specifies
      the location of the main executable file on disk.  See documentation
      of the IMPORTED_* properties for more information.
 
  add_library
      Add a library to the project using the specified source files.
 
        add_library(<name> [STATIC | SHARED | MODULE]
                    [EXCLUDE_FROM_ALL]
                    source1 source2 ... sourceN)
 
      Adds a library target called <name> to be built from the source files
      listed in the command invocation.  The <name> corresponds to the
      logical target name and must be globally unique within a project.  The
      actual file name of the library built is constructed based on
      conventions of the native platform (such as lib<name>.a or
      <name>.lib).
 
      STATIC, SHARED, or MODULE may be given to specify the type of library
      to be created.  STATIC libraries are archives of object files for use
      when linking other targets.  SHARED libraries are linked dynamically
      and loaded at runtime.  MODULE libraries are plugins that are not
      linked into other targets but may be loaded dynamically at runtime
      using dlopen-like functionality.  If no type is given explicitly the
      type is STATIC or SHARED based on whether the current value of the
      variable BUILD_SHARED_LIBS is true.
 
      By default the library file will be created in the build tree
      directory corresponding to the source tree directory in which the
      command was invoked.  See documentation of the
      ARCHIVE_OUTPUT_DIRECTORY, LIBRARY_OUTPUT_DIRECTORY, and
      RUNTIME_OUTPUT_DIRECTORY target properties to change this location.
      See documentation of the OUTPUT_NAME target property to change the
      <name> part of the final file name.
 
      If EXCLUDE_FROM_ALL is given the corresponding property will be set on
      the created target.  See documentation of the EXCLUDE_FROM_ALL target
      property for details.
 
      The add_library command can also create IMPORTED library targets using
      this signature:
 
        add_library(<name> <SHARED|STATIC|MODULE|UNKNOWN> IMPORTED)
 
      An IMPORTED library target references a library file located outside
      the project.  No rules are generated to build it.  The target name has
      scope in the directory in which it is created and below.  It may be
      referenced like any target built within the project.  IMPORTED
      libraries are useful for convenient reference from commands like
      target_link_libraries.  Details about the imported library are
      specified by setting properties whose names begin in "IMPORTED_".  The
      most important such property is IMPORTED_LOCATION (and its
      per-configuration version IMPORTED_LOCATION_<CONFIG>) which specifies
      the location of the main library file on disk.  See documentation of
      the IMPORTED_* properties for more information.
 
  add_subdirectory
      Add a subdirectory to the build.
 
        add_subdirectory(source_dir [binary_dir]
                          [EXCLUDE_FROM_ALL])
 
      Add a subdirectory to the build.  The source_dir specifies the
      directory in which the source CmakeLists.txt and code files are
      located.  If it is a relative path it will be evaluated with respect
      to the current directory (the typical usage), but it may also be an
      absolute path.  The binary_dir specifies the directory in which to
      place the output files.  If it is a relative path it will be evaluated
      with respect to the current output directory, but it may also be an
      absolute path.  If binary_dir is not specified, the value of
      source_dir, before expanding any relative path, will be used (the
      typical usage).  The CMakeLists.txt file in the specified source
      directory will be processed immediately by CMake before processing in
      the current input file continues beyond this command.
 
      If the EXCLUDE_FROM_ALL argument is provided then targets in the
      subdirectory will not be included in the ALL target of the parent
      directory by default, and will be excluded from IDE project files.
      Users must explicitly build targets in the subdirectory.  This is
      meant for use when the subdirectory contains a separate part of the
      project that is useful but not necessary, such as a set of examples.
      Typically the subdirectory should contain its own project() command
      invocation so that a full build system will be generated in the
      subdirectory (such as a VS IDE solution file).  Note that inter-target
      dependencies supercede this exclusion.  If a target built by the
      parent project depends on a target in the subdirectory, the dependee
      target will be included in the parent project build system to satisfy
      the dependency.
 
  add_test
      Add a test to the project with the specified arguments.
 
        add_test(testname Exename arg1 arg2 ... )
 
      If the ENABLE_TESTING command has been run, this command adds a test
      target to the current directory.  If ENABLE_TESTING has not been run,
      this command does nothing.  The tests are run by the testing subsystem
      by executing Exename with the specified arguments.  Exename can be
      either an executable built by this project or an arbitrary executable
      on the system (like tclsh).  The test will be run with the current
      working directory set to the CMakeList.txt files corresponding
      directory in the binary tree.
 
     
 
        add_test(NAME <name> [CONFIGURATIONS [Debug|Release|...]]
                  COMMAND <command> [arg1 [arg2 ...]])
 
      If COMMAND specifies an executable target (created by add_executable)
      it will automatically be replaced by the location of the executable
      created at build time.  If a CONFIGURATIONS option is given then the
      test will be executed only when testing under one of the named
      configurations.
 
      Arguments after COMMAND may use "generator expressions" with the
      syntax "$<...>".  These expressions are evaluted during build system
      generation and produce information specific to each generated build
      configuration.  Valid expressions are:
 
        $<CONFIGURATION>          = configuration name
        $<TARGET_FILE:tgt>        = main file (.exe, .so.1.2, .a)
        $<TARGET_LINKER_FILE:tgt> = file used to link (.a, .lib, .so)
        $<TARGET_SONAME_FILE:tgt> = file with soname (.so.3)
 
      where "tgt" is the name of a target.  Target file expressions produce
      a full path, but _DIR and _NAME versions can produce the directory and
      file name components:
 
        $<TARGET_FILE_DIR:tgt>/$<TARGET_FILE_NAME:tgt>
        $<TARGET_LINKER_FILE_DIR:tgt>/$<TARGET_LINKER_FILE_NAME:tgt>
        $<TARGET_SONAME_FILE_DIR:tgt>/$<TARGET_SONAME_FILE_NAME:tgt>
 
      Example usage:
 
        add_test(NAME mytest
                  COMMAND testDriver --config $<CONFIGURATION>
                                    --exe $<TARGET_FILE:myexe>)
 
      This creates a test "mytest" whose command runs a testDriver tool
      passing the configuration name and the full path to the executable
      file produced by target "myexe".
 
  aux_source_directory
      Find all source files in a directory.
 
        aux_source_directory(<dir> <variable>)
 
      Collects the names of all the source files in the specified directory
      and stores the list in the <variable> provided.  This command is
      intended to be used by projects that use explicit template
      instantiation.  Template instantiation files can be stored in a
      "Templates" subdirectory and collected automatically using this
      command to avoid manually listing all instantiations.
 
      It is tempting to use this command to avoid writing the list of source
      files for a library or executable target.  While this seems to work,
      there is no way for CMake to generate a build system that knows when a
      new source file has been added.  Normally the generated build system
      knows when it needs to rerun CMake because the CMakeLists.txt file is
      modified to add a new source.  When the source is just added to the
      directory without modifying this file, one would have to manually
      rerun CMake to generate a build system incorporating the new file.
 
  break
      Break from an enclosing foreach or while loop.
 
        break()
 
      Breaks from an enclosing foreach loop or while loop
 
  build_command
      Get the command line to build this project.
 
        build_command(<variable>
                      [CONFIGURATION <config>]
                      [PROJECT_NAME <projname>]
                      [TARGET <target>])
 
      Sets the given <variable> to a string containing the command line for
      building one configuration of a target in a project using the build
      tool appropriate for the current CMAKE_GENERATOR.
 
      If CONFIGURATION is omitted, CMake chooses a reasonable default value
      for multi-configuration generators.  CONFIGURATION is ignored for
      single-configuration generators.
 
      If PROJECT_NAME is omitted, the resulting command line will build the
      top level PROJECT in the current build tree.
 
      If TARGET is omitted, the resulting command line will build
      everything, effectively using build target 'all' or 'ALL_BUILD'.
 
        build_command(<cachevariable> <makecommand>)
 
      This second signature is deprecated, but still available for backwards
      compatibility.  Use the first signature instead.
 
      Sets the given <cachevariable> to a string containing the command to
      build this project from the root of the build tree using the build
      tool given by <makecommand>.  <makecommand> should be the full path to
      msdev, devenv, nmake, make or one of the end user build tools.
 
  cmake_minimum_required
      Set the minimum required version of cmake for a project.
 
        cmake_minimum_required(VERSION major[.minor[.patch[.tweak]]]
                                [FATAL_ERROR])
 
      If the current version of CMake is lower than that required it will
      stop processing the project and report an error.  When a version
      higher than 2.4 is specified the command implicitly invokes
 
        cmake_policy(VERSION major[.minor[.patch[.tweak]]])
 
      which sets the cmake policy version level to the version specified.
      When version 2.4 or lower is given the command implicitly invokes
 
        cmake_policy(VERSION 2.4)
 
      which enables compatibility features for CMake 2.4 and lower.
 
      The FATAL_ERROR option is accepted but ignored by CMake 2.6 and
      higher.  It should be specified so CMake versions 2.4 and lower fail
      with an error instead of just a warning.
 
  cmake_policy
      Manage CMake Policy settings.
 
      As CMake evolves it is sometimes necessary to change existing behavior
      in order to fix bugs or improve implementations of existing features.
      The CMake Policy mechanism is designed to help keep existing projects
      building as new versions of CMake introduce changes in behavior.  Each
      new policy (behavioral change) is given an identifier of the form
      "CMP<NNNN>" where "<NNNN>" is an integer index.  Documentation
      associated with each policy describes the OLD and NEW behavior and the
      reason the policy was introduced.  Projects may set each policy to
      select the desired behavior.  When CMake needs to know which behavior
      to use it checks for a setting specified by the project.  If no
      setting is available the OLD behavior is assumed and a warning is
      produced requesting that the policy be set.
 
      The cmake_policy command is used to set policies to OLD or NEW
      behavior.  While setting policies individually is supported, we
      encourage projects to set policies based on CMake versions.
 
        cmake_policy(VERSION major.minor[.patch[.tweak]])
 
      Specify that the current CMake list file is written for the given
      version of CMake.  All policies introduced in the specified version or
      earlier will be set to use NEW behavior.  All policies introduced
      after the specified version will be unset.  This effectively requests
      behavior preferred as of a given CMake version and tells newer CMake
      versions to warn about their new policies.  The policy version
      specified must be at least 2.4 or the command will report an error.
      In order to get compatibility features supporting versions earlier
      than 2.4 see documentation of policy CMP0001.
 
        cmake_policy(SET CMP<NNNN> NEW)
        cmake_policy(SET CMP<NNNN> OLD)
 
      Tell CMake to use the OLD or NEW behavior for a given policy.
      Projects depending on the old behavior of a given policy may silence a
      policy warning by setting the policy state to OLD.  Alternatively one
      may fix the project to work with the new behavior and set the policy
      state to NEW.
 
        cmake_policy(GET CMP<NNNN> <variable>)
 
      Check whether a given policy is set to OLD or NEW behavior.  The
      output variable value will be "OLD" or "NEW" if the policy is set, and
      empty otherwise.
 
      CMake keeps policy settings on a stack, so changes made by the
      cmake_policy command affect only the top of the stack.  A new entry on
      the policy stack is managed automatically for each subdirectory to
      protect its parents and siblings.  CMake also manages a new entry for
      scripts loaded by include() and find_package() commands except when
      invoked with the NO_POLICY_SCOPE option (see also policy CMP0011).
      The cmake_policy command provides an interface to manage custom
      entries on the policy stack:
 
        cmake_policy(PUSH)
        cmake_policy(POP)
 
      Each PUSH must have a matching POP to erase any changes.  This is
      useful to make temporary changes to policy settings.
 
      Functions and macros record policy settings when they are created and
      use the pre-record policies when they are invoked.  If the function or
      macro implementation sets policies, the changes automatically
      propagate up through callers until they reach the closest nested
      policy stack entry.
 
  configure_file
      Copy a file to another location and modify its contents.
 
        configure_file(<input> <output>
                        [COPYONLY] [ESCAPE_QUOTES] [@ONLY])
 
      Copies a file <input> to file <output> and substitutes variable values
      referenced in the file content.  If <input> is a relative path it is
      evaluated with respect to the current source directory.  The <input>
      must be a file, not a directory.  If <output> is a relative path it is
      evaluated with respect to the current binary directory.  If <output>
      names an existing directory the input file is placed in that directory
      with its original name.
 
      This command replaces any variables in the input file referenced as
      ${VAR} or @VAR@ with their values as determined by CMake.  If a
      variable is not defined, it will be replaced with nothing.  If
      COPYONLY is specified, then no variable expansion will take place.  If
      ESCAPE_QUOTES is specified then any substituted quotes will be C-style
      escaped.  The file will be configured with the current values of CMake
      variables.  If @ONLY is specified, only variables of the form @VAR@
      will be replaces and ${VAR} will be ignored.  This is useful for
      configuring scripts that use ${VAR}.  Any occurrences of #cmakedefine
      VAR will be replaced with either #define VAR or /* #undef VAR */
      depending on the setting of VAR in CMake.  Any occurrences of
      #cmakedefine01 VAR will be replaced with either #define VAR 1 or
      #define VAR 0 depending on whether VAR evaluates to TRUE or FALSE in
      CMake
 
  create_test_sourcelist
      Create a test driver and source list for building test programs.
 
        create_test_sourcelist(sourceListName driverName
                                test1 test2 test3
                                EXTRA_INCLUDE include.h
                                FUNCTION function)
 
      A test driver is a program that links together many small tests into a
      single executable.  This is useful when building static executables
      with large libraries to shrink the total required size.  The list of
      source files needed to build the test driver will be in
      sourceListName.  DriverName is the name of the test driver program.
      The rest of the arguments consist of a list of test source files, can
      be semicolon separated.  Each test source file should have a function
      in it that is the same name as the file with no extension (foo.cxx
      should have int foo(int, char*[]);) DriverName will be able to call
      each of the tests by name on the command line.  If EXTRA_INCLUDE is
      specified, then the next argument is included into the generated file.
      If FUNCTION is specified, then the next argument is taken as a
      function name that is passed a pointer to ac and av.  This can be used
      to add extra command line processing to each test.  The cmake variable
      CMAKE_TESTDRIVER_BEFORE_TESTMAIN can be set to have code that will be
      placed directly before calling the test main function.
      CMAKE_TESTDRIVER_AFTER_TESTMAIN can be set to have code that will be
      placed directly after the call to the test main function.
 
  define_property
      Define and document custom properties.
 
        define_property(<GLOBAL | DIRECTORY | TARGET | SOURCE |
                          TEST | VARIABLE | CACHED_VARIABLE>
                          PROPERTY <name> [INHERITED]
                          BRIEF_DOCS <brief-doc> [docs...]
                          FULL_DOCS <full-doc> [docs...])
 
      Define one property in a scope for use with the set_property and
      get_property commands.  This is primarily useful to associate
      documentation with property names that may be retrieved with the
      get_property command.  The first argument determines the kind of scope
      in which the property should be used.  It must be one of the
      following:
 
        GLOBAL    = associated with the global namespace
        DIRECTORY = associated with one directory
        TARGET    = associated with one target
        SOURCE    = associated with one source file
        TEST      = associated with a test named with add_test
        VARIABLE  = documents a CMake language variable
        CACHED_VARIABLE = documents a CMake cache variable
 
      Note that unlike set_property and get_property no actual scope needs
      to be given; only the kind of scope is important.
 
      The required PROPERTY option is immediately followed by the name of
      the property being defined.
 
      If the INHERITED option then the get_property command will chain up to
      the next higher scope when the requested property is not set in the
      scope given to the command.  DIRECTORY scope chains to GLOBAL.
      TARGET, SOURCE, and TEST chain to DIRECTORY.
 
      The BRIEF_DOCS and FULL_DOCS options are followed by strings to be
      associated with the property as its brief and full documentation.
      Corresponding options to the get_property command will retrieve the
      documentation.
 
  else
      Starts the else portion of an if block.
 
        else(expression)
 
      See the if command.
 
  elseif
      Starts the elseif portion of an if block.
 
        elseif(expression)
 
      See the if command.
 
  enable_language
      Enable a language (CXX/C/Fortran/etc)
 
        enable_language(languageName [OPTIONAL] )
 
      This command enables support for the named language in CMake.  This is
      the same as the project command but does not create any of the extra
      variables that are created by the project command.  Example languages
      are CXX, C, Fortran.  If OPTIONAL is used, use the
      CMAKE_<languageName>_COMPILER_WORKS variable to check whether the
      language has been enabled successfully.
 
  enable_testing
      Enable testing for current directory and below.
 
        enable_testing()
 
      Enables testing for this directory and below.  See also the add_test
      command.  Note that ctest expects to find a test file in the build
      directory root.  Therefore, this command should be in the source
      directory root.
 
  endforeach
      Ends a list of commands in a FOREACH block.
 
        endforeach(expression)
 
      See the FOREACH command.
 
  endfunction
      Ends a list of commands in a function block.
 
        endfunction(expression)
 
      See the function command.
 
  endif
      Ends a list of commands in an if block.
 
        endif(expression)
 
      See the if command.
 
  endmacro
      Ends a list of commands in a macro block.
 
        endmacro(expression)
 
      See the macro command.
 
  endwhile
      Ends a list of commands in a while block.
 
        endwhile(expression)
 
      See the while command.
 
  execute_process
      Execute one or more child processes.
 
        execute_process(COMMAND <cmd1> [args1...]]
                        [COMMAND <cmd2> [args2...] [...]]
                        [WORKING_DIRECTORY <directory>]
                        [TIMEOUT <seconds>]
                        [RESULT_VARIABLE <variable>]
                        [OUTPUT_VARIABLE <variable>]
                        [ERROR_VARIABLE <variable>]
                        [INPUT_FILE <file>]
                        [OUTPUT_FILE <file>]
                        [ERROR_FILE <file>]
                        [OUTPUT_QUIET]
                        [ERROR_QUIET]
                        [OUTPUT_STRIP_TRAILING_WHITESPACE]
                        [ERROR_STRIP_TRAILING_WHITESPACE])
 
      Runs the given sequence of one or more commands with the standard
      output of each process piped to the standard input of the next.  A
      single standard error pipe is used for all processes.  If
      WORKING_DIRECTORY is given the named directory will be set as the
      current working directory of the child processes.  If TIMEOUT is given
      the child processes will be terminated if they do not finish in the
      specified number of seconds (fractions are allowed).  If
      RESULT_VARIABLE is given the variable will be set to contain the
      result of running the processes.  This will be an integer return code
      from the last child or a string describing an error condition.  If
      OUTPUT_VARIABLE or ERROR_VARIABLE are given the variable named will be
      set with the contents of the standard output and standard error pipes
      respectively.  If the same variable is named for both pipes their
      output will be merged in the order produced.  If INPUT_FILE,
      OUTPUT_FILE, or ERROR_FILE is given the file named will be attached to
      the standard input of the first process, standard output of the last
      process, or standard error of all processes respectively.  If
      OUTPUT_QUIET or ERROR_QUIET is given then the standard output or
      standard error results will be quietly ignored.  If more than one
      OUTPUT_* or ERROR_* option is given for the same pipe the precedence
      is not specified.  If no OUTPUT_* or ERROR_* options are given the
      output will be shared with the corresponding pipes of the CMake
      process itself.
 
      The execute_process command is a newer more powerful version of
      exec_program, but the old command has been kept for compatibility.
 
  export
      Export targets from the build tree for use by outside projects.
 
        export(TARGETS [target1 [target2 [...]]] [NAMESPACE <namespace>]
                [APPEND] FILE <filename>)
 
      Create a file <filename> that may be included by outside projects to
      import targets from the current project's build tree.  This is useful
      during cross-compiling to build utility executables that can run on
      the host platform in one project and then import them into another
      project being compiled for the target platform.  If the NAMESPACE
      option is given the <namespace> string will be prepended to all target
      names written to the file.  If the APPEND option is given the
      generated code will be appended to the file instead of overwriting it.
      If a library target is included in the export but a target to which it
      links is not included the behavior is unspecified.
 
      The file created by this command is specific to the build tree and
      should never be installed.  See the install(EXPORT) command to export
      targets from an installation tree.
 
        export(PACKAGE <name>)
 
      Store the current build directory in the CMake user package registry
      for package <name>.  The find_package command may consider the
      directory while searching for package <name>.  This helps dependent
      projects find and use a package from the current project's build tree
      without help from the user.  Note that the entry in the package
      registry that this command creates works only in conjunction with a
      package configuration file (<name>Config.cmake) that works with the
      build tree.
 
  file
      File manipulation command.
 
        file(WRITE filename "message to write"... )
        file(APPEND filename "message to write"... )
        file(READ filename variable [LIMIT numBytes] [OFFSET offset] [HEX])
        file(STRINGS filename variable [LIMIT_COUNT num]
              [LIMIT_INPUT numBytes] [LIMIT_OUTPUT numBytes]
              [LENGTH_MINIMUM numBytes] [LENGTH_MAXIMUM numBytes]
              [NEWLINE_CONSUME] [REGEX regex]
              [NO_HEX_CONVERSION])
        file(GLOB variable [RELATIVE path] [globbing expressions]...)
        file(GLOB_RECURSE variable [RELATIVE path]
              [FOLLOW_SYMLINKS] [globbing expressions]...)
        file(RENAME <oldname> <newname>)
        file(REMOVE [file1 ...])
        file(REMOVE_RECURSE [file1 ...])
        file(MAKE_DIRECTORY [directory1 directory2 ...])
        file(RELATIVE_PATH variable directory file)
        file(TO_CMAKE_PATH path result)
        file(TO_NATIVE_PATH path result)
        file(DOWNLOAD url file [TIMEOUT timeout] [STATUS status] [LOG log]
              [EXPECTED_MD5 sum] [SHOW_PROGRESS])
 
      WRITE will write a message into a file called 'filename'.  It
      overwrites the file if it already exists, and creates the file if it
      does not exist.
 
      APPEND will write a message into a file same as WRITE, except it will
      append it to the end of the file
 
      READ will read the content of a file and store it into the variable.
      It will start at the given offset and read up to numBytes.  If the
      argument HEX is given, the binary data will be converted to
      hexadecimal representation and this will be stored in the variable.
 
      STRINGS will parse a list of ASCII strings from a file and store it in
      a variable.  Binary data in the file are ignored.  Carriage return
      (CR) characters are ignored.  It works also for Intel Hex and Motorola
      S-record files, which are automatically converted to binary format
      when reading them.  Disable this using NO_HEX_CONVERSION.
 
      LIMIT_COUNT sets the maximum number of strings to return.  LIMIT_INPUT
      sets the maximum number of bytes to read from the input file.
      LIMIT_OUTPUT sets the maximum number of bytes to store in the output
      variable.  LENGTH_MINIMUM sets the minimum length of a string to
      return.  Shorter strings are ignored.  LENGTH_MAXIMUM sets the maximum
      length of a string to return.  Longer strings are split into strings
      no longer than the maximum length.  NEWLINE_CONSUME allows newlines to
      be included in strings instead of terminating them.
 
      REGEX specifies a regular expression that a string must match to be
      returned.  Typical usage
 
        file(STRINGS myfile.txt myfile)
 
      stores a list in the variable "myfile" in which each item is a line
      from the input file.
 
      GLOB will generate a list of all files that match the globbing
      expressions and store it into the variable.  Globbing expressions are
      similar to regular expressions, but much simpler.  If RELATIVE flag is
      specified for an expression, the results will be returned as a
      relative path to the given path.
 
      Examples of globbing expressions include:
 
          *.cxx      - match all files with extension cxx
          *.vt?      - match all files with extension vta,...,vtz
          f[3-5].txt - match files f3.txt, f4.txt, f5.txt
 
      GLOB_RECURSE will generate a list similar to the regular GLOB, except
      it will traverse all the subdirectories of the matched directory and
      match the files.  Subdirectories that are symlinks are only traversed
      if FOLLOW_SYMLINKS is given or cmake policy CMP0009 is not set to NEW.
      See cmake --help-policy CMP0009 for more information.
 
      Examples of recursive globbing include:
 
          /dir/*.py  - match all python files in /dir and subdirectories
 
      MAKE_DIRECTORY will create the given directories, also if their parent
      directories don't exist yet
 
      RENAME moves a file or directory within a filesystem, replacing the
      destination atomically.
 
      REMOVE will remove the given files, also in subdirectories
 
      REMOVE_RECURSE will remove the given files and directories, also
      non-empty directories
 
      RELATIVE_PATH will determine relative path from directory to the given
      file.
 
      TO_CMAKE_PATH will convert path into a cmake style path with unix /.
      The input can be a single path or a system path like "$ENV{PATH}".
      Note the double quotes around the ENV call TO_CMAKE_PATH only takes
      one argument.
 
      TO_NATIVE_PATH works just like TO_CMAKE_PATH, but will convert from a
      cmake style path into the native path style \ for windows and / for
      UNIX.
 
      DOWNLOAD will download the given URL to the given file.  If LOG var is
      specified a log of the download will be put in var.  If STATUS var is
      specified the status of the operation will be put in var.  The status
      is returned in a list of length 2.  The first element is the numeric
      return value for the operation, and the second element is a string
      value for the error.  A 0 numeric error means no error in the
      operation.  If TIMEOUT time is specified, the operation will timeout
      after time seconds, time should be specified as an integer.  If
      EXPECTED_MD5 sum is specified, the operation will verify that the
      downloaded file's actual md5 sum matches the expected value.  If it
      does not match, the operation fails with an error.  If SHOW_PROGRESS
      is specified, progress information will be printed as status messages
      until the operation is complete.
 
      The file() command also provides COPY and INSTALL signatures:
 
        file(<COPY|INSTALL> files... DESTINATION <dir>
              [FILE_PERMISSIONS permissions...]
              [DIRECTORY_PERMISSIONS permissions...]
              [NO_SOURCE_PERMISSIONS] [USE_SOURCE_PERMISSIONS]
              [FILES_MATCHING]
              [[PATTERN <pattern> | REGEX <regex>]
              [EXCLUDE] [PERMISSIONS permissions...]] [...])
 
      The COPY signature copies files, directories, and symlinks to a
      destination folder.  Relative input paths are evaluated with respect
      to the current source directory, and a relative destination is
      evaluated with respect to the current build directory.  Copying
      preserves input file timestamps, and optimizes out a file if it exists
      at the destination with the same timestamp.  Copying preserves input
      permissions unless explicit permissions or NO_SOURCE_PERMISSIONS are
      given (default is USE_SOURCE_PERMISSIONS).  See the install(DIRECTORY)
      command for documentation of permissions, PATTERN, REGEX, and EXCLUDE
      options.
 
      The INSTALL signature differs slightly from COPY: it prints status
      messages, and NO_SOURCE_PERMISSIONS is default.  Installation scripts
      generated by the install() command use this signature (with some
      undocumented options for internal use).
 
  find_file
      Find the full path to a file.
 
          find_file(<VAR> name1 [path1 path2 ...])
 
      This is the short-hand signature for the command that is sufficient in
      many cases.  It is the same as find_file(<VAR> name1 [PATHS path1
      path2 ...])
 
          find_file(
                    <VAR>
                    name | NAMES name1 [name2 ...]
                    [HINTS path1 [path2 ... ENV var]]
                    [PATHS path1 [path2 ... ENV var]]
                    [PATH_SUFFIXES suffix1 [suffix2 ...]]
                    [DOC "cache documentation string"]
                    [NO_DEFAULT_PATH]
                    [NO_CMAKE_ENVIRONMENT_PATH]
                    [NO_CMAKE_PATH]
                    [NO_SYSTEM_ENVIRONMENT_PATH]
                    [NO_CMAKE_SYSTEM_PATH]
                    [CMAKE_FIND_ROOT_PATH_BOTH |
                    ONLY_CMAKE_FIND_ROOT_PATH |
                    NO_CMAKE_FIND_ROOT_PATH]
                  )
 
      This command is used to find a full path to named file.  A cache entry
      named by <VAR> is created to store the result of this command.  If the
      full path to a file is found the result is stored in the variable and
      the search will not be repeated unless the variable is cleared.  If
      nothing is found, the result will be <VAR>-NOTFOUND, and the search
      will be attempted again the next time find_file is invoked with the
      same variable.  The name of the full path to a file that is searched
      for is specified by the names listed after the NAMES argument.
      Additional search locations can be specified after the PATHS argument.
      If ENV var is found in the HINTS or PATHS section the environment
      variable var will be read and converted from a system environment
      variable to a cmake style list of paths.  For example ENV PATH would
      be a way to list the system path variable.  The argument after DOC
      will be used for the documentation string in the cache.  PATH_SUFFIXES
      specifies additional subdirectories to check below each search path.
 
      If NO_DEFAULT_PATH is specified, then no additional paths are added to
      the search.  If NO_DEFAULT_PATH is not specified, the search process
      is as follows:
 
      1.  Search paths specified in cmake-specific cache variables.  These
      are intended to be used on the command line with a -DVAR=value.  This
      can be skipped if NO_CMAKE_PATH is passed.
 
          <prefix>/include for each <prefix> in CMAKE_PREFIX_PATH
          CMAKE_INCLUDE_PATH
          CMAKE_FRAMEWORK_PATH
 
      2.  Search paths specified in cmake-specific environment variables.
      These are intended to be set in the user's shell configuration.  This
      can be skipped if NO_CMAKE_ENVIRONMENT_PATH is passed.
 
          <prefix>/include for each <prefix> in CMAKE_PREFIX_PATH
          CMAKE_INCLUDE_PATH
          CMAKE_FRAMEWORK_PATH
 
      3.  Search the paths specified by the HINTS option.  These should be
      paths computed by system introspection, such as a hint provided by the
      location of another item already found.  Hard-coded guesses should be
      specified with the PATHS option.
 
      4.  Search the standard system environment variables.  This can be
      skipped if NO_SYSTEM_ENVIRONMENT_PATH is an argument.
 
          PATH
          INCLUDE
 
      5.  Search cmake variables defined in the Platform files for the
      current system.  This can be skipped if NO_CMAKE_SYSTEM_PATH is
      passed.
 
          <prefix>/include for each <prefix> in CMAKE_SYSTEM_PREFIX_PATH
          CMAKE_SYSTEM_INCLUDE_PATH
          CMAKE_SYSTEM_FRAMEWORK_PATH
 
      6.  Search the paths specified by the PATHS option or in the
      short-hand version of the command.  These are typically hard-coded
      guesses.
 
      On Darwin or systems supporting OS X Frameworks, the cmake variable
      CMAKE_FIND_FRAMEWORK can be set to empty or one of the following:
 
          "FIRST"  - Try to find frameworks before standard
                    libraries or headers. This is the default on Darwin.
          "LAST"  - Try to find frameworks after standard
                    libraries or headers.
          "ONLY"  - Only try to find frameworks.
          "NEVER" - Never try to find frameworks.
 
      On Darwin or systems supporting OS X Application Bundles, the cmake
      variable CMAKE_FIND_APPBUNDLE can be set to empty or one of the
      following:
 
          "FIRST"  - Try to find application bundles before standard
                    programs. This is the default on Darwin.
          "LAST"  - Try to find application bundles after standard
                    programs.
          "ONLY"  - Only try to find application bundles.
          "NEVER" - Never try to find application bundles.
 
      The CMake variable CMAKE_FIND_ROOT_PATH specifies one or more
      directories to be prepended to all other search directories.  This
      effectively "re-roots" the entire search under given locations.  By
      default it is empty.  It is especially useful when cross-compiling to
      point to the root directory of the target environment and CMake will
      search there too.  By default at first the directories listed in
      CMAKE_FIND_ROOT_PATH and then the non-rooted directories will be
      searched.  The default behavior can be adjusted by setting
      CMAKE_FIND_ROOT_PATH_MODE_INCLUDE.  This behavior can be manually
      overridden on a per-call basis.  By using CMAKE_FIND_ROOT_PATH_BOTH
      the search order will be as described above.  If
      NO_CMAKE_FIND_ROOT_PATH is used then CMAKE_FIND_ROOT_PATH will not be
      used.  If ONLY_CMAKE_FIND_ROOT_PATH is used then only the re-rooted
      directories will be searched.
 
      The default search order is designed to be most-specific to
      least-specific for common use cases.  Projects may override the order
      by simply calling the command multiple times and using the NO_*
      options:
 
          find_file(<VAR> NAMES name PATHS paths... NO_DEFAULT_PATH)
          find_file(<VAR> NAMES name)
 
      Once one of the calls succeeds the result variable will be set and
      stored in the cache so that no call will search again.
 
  find_library
      Find a library.
 
          find_library(<VAR> name1 [path1 path2 ...])
 
      This is the short-hand signature for the command that is sufficient in
      many cases.  It is the same as find_library(<VAR> name1 [PATHS path1
      path2 ...])
 
          find_library(
                    <VAR>
                    name | NAMES name1 [name2 ...]
                    [HINTS path1 [path2 ... ENV var]]
                    [PATHS path1 [path2 ... ENV var]]
                    [PATH_SUFFIXES suffix1 [suffix2 ...]]
                    [DOC "cache documentation string"]
                    [NO_DEFAULT_PATH]
                    [NO_CMAKE_ENVIRONMENT_PATH]
                    [NO_CMAKE_PATH]
                    [NO_SYSTEM_ENVIRONMENT_PATH]
                    [NO_CMAKE_SYSTEM_PATH]
                    [CMAKE_FIND_ROOT_PATH_BOTH |
                    ONLY_CMAKE_FIND_ROOT_PATH |
                    NO_CMAKE_FIND_ROOT_PATH]
                  )
 
      This command is used to find a library.  A cache entry named by <VAR>
      is created to store the result of this command.  If the library is
      found the result is stored in the variable and the search will not be
      repeated unless the variable is cleared.  If nothing is found, the
      result will be <VAR>-NOTFOUND, and the search will be attempted again
      the next time find_library is invoked with the same variable.  The
      name of the library that is searched for is specified by the names
      listed after the NAMES argument.  Additional search locations can be
      specified after the PATHS argument.  If ENV var is found in the HINTS
      or PATHS section the environment variable var will be read and
      converted from a system environment variable to a cmake style list of
      paths.  For example ENV PATH would be a way to list the system path
      variable.  The argument after DOC will be used for the documentation
      string in the cache.  PATH_SUFFIXES specifies additional
      subdirectories to check below each search path.
 
      If NO_DEFAULT_PATH is specified, then no additional paths are added to
      the search.  If NO_DEFAULT_PATH is not specified, the search process
      is as follows:
 
      1.  Search paths specified in cmake-specific cache variables.  These
      are intended to be used on the command line with a -DVAR=value.  This
      can be skipped if NO_CMAKE_PATH is passed.
 
          <prefix>/lib for each <prefix> in CMAKE_PREFIX_PATH
          CMAKE_LIBRARY_PATH
          CMAKE_FRAMEWORK_PATH
 
      2.  Search paths specified in cmake-specific environment variables.
      These are intended to be set in the user's shell configuration.  This
      can be skipped if NO_CMAKE_ENVIRONMENT_PATH is passed.
 
          <prefix>/lib for each <prefix> in CMAKE_PREFIX_PATH
          CMAKE_LIBRARY_PATH
          CMAKE_FRAMEWORK_PATH
 
      3.  Search the paths specified by the HINTS option.  These should be
      paths computed by system introspection, such as a hint provided by the
      location of another item already found.  Hard-coded guesses should be
      specified with the PATHS option.
 
      4.  Search the standard system environment variables.  This can be
      skipped if NO_SYSTEM_ENVIRONMENT_PATH is an argument.
 
          PATH
          LIB
 
      5.  Search cmake variables defined in the Platform files for the
      current system.  This can be skipped if NO_CMAKE_SYSTEM_PATH is
      passed.
 
          <prefix>/lib for each <prefix> in CMAKE_SYSTEM_PREFIX_PATH
          CMAKE_SYSTEM_LIBRARY_PATH
          CMAKE_SYSTEM_FRAMEWORK_PATH
 
      6.  Search the paths specified by the PATHS option or in the
      short-hand version of the command.  These are typically hard-coded
      guesses.
 
      On Darwin or systems supporting OS X Frameworks, the cmake variable
      CMAKE_FIND_FRAMEWORK can be set to empty or one of the following:
 
          "FIRST"  - Try to find frameworks before standard
                    libraries or headers. This is the default on Darwin.
          "LAST"  - Try to find frameworks after standard
                    libraries or headers.
          "ONLY"  - Only try to find frameworks.
          "NEVER" - Never try to find frameworks.
 
      On Darwin or systems supporting OS X Application Bundles, the cmake
      variable CMAKE_FIND_APPBUNDLE can be set to empty or one of the
      following:
 
          "FIRST"  - Try to find application bundles before standard
                    programs. This is the default on Darwin.
          "LAST"  - Try to find application bundles after standard
                    programs.
          "ONLY"  - Only try to find application bundles.
          "NEVER" - Never try to find application bundles.
 
      The CMake variable CMAKE_FIND_ROOT_PATH specifies one or more
      directories to be prepended to all other search directories.  This
      effectively "re-roots" the entire search under given locations.  By
      default it is empty.  It is especially useful when cross-compiling to
      point to the root directory of the target environment and CMake will
      search there too.  By default at first the directories listed in
      CMAKE_FIND_ROOT_PATH and then the non-rooted directories will be
      searched.  The default behavior can be adjusted by setting
      CMAKE_FIND_ROOT_PATH_MODE_LIBRARY.  This behavior can be manually
      overridden on a per-call basis.  By using CMAKE_FIND_ROOT_PATH_BOTH
      the search order will be as described above.  If
      NO_CMAKE_FIND_ROOT_PATH is used then CMAKE_FIND_ROOT_PATH will not be
      used.  If ONLY_CMAKE_FIND_ROOT_PATH is used then only the re-rooted
      directories will be searched.
 
      The default search order is designed to be most-specific to
      least-specific for common use cases.  Projects may override the order
      by simply calling the command multiple times and using the NO_*
      options:
 
          find_library(<VAR> NAMES name PATHS paths... NO_DEFAULT_PATH)
          find_library(<VAR> NAMES name)
 
      Once one of the calls succeeds the result variable will be set and
      stored in the cache so that no call will search again.
 
      If the library found is a framework, then VAR will be set to the full
      path to the framework <fullPath>/A.framework.  When a full path to a
      framework is used as a library, CMake will use a -framework A, and a
      -F<fullPath> to link the framework to the target.
 
  find_package
      Load settings for an external project.
 
        find_package(<package> [version] [EXACT] [QUIET]
                      [[REQUIRED|COMPONENTS] [components...]]
                      [NO_POLICY_SCOPE])
 
      Finds and loads settings from an external project.  <package>_FOUND
      will be set to indicate whether the package was found.  When the
      package is found package-specific information is provided through
      variables documented by the package itself.  The QUIET option disables
      messages if the package cannot be found.  The REQUIRED option stops
      processing with an error message if the package cannot be found.  A
      package-specific list of components may be listed after the REQUIRED
      option or after the COMPONENTS option if no REQUIRED option is given.
      The [version] argument requests a version with which the package found
      should be compatible (format is major[.minor[.patch[.tweak]]]).  The
      EXACT option requests that the version be matched exactly.  If no
      [version] is given to a recursive invocation inside a find-module, the
      [version] and EXACT arguments are forwarded automatically from the
      outer call.  Version support is currently provided only on a
      package-by-package basis (details below).
 
      User code should generally look for packages using the above simple
      signature.  The remainder of this command documentation specifies the
      full command signature and details of the search process.  Project
      maintainers wishing to provide a package to be found by this command
      are encouraged to read on.
 
      The command has two modes by which it searches for packages: "Module"
      mode and "Config" mode.  Module mode is available when the command is
      invoked with the above reduced signature.  CMake searches for a file
      called "Find<package>.cmake" in the CMAKE_MODULE_PATH followed by the
      CMake installation.  If the file is found, it is read and processed by
      CMake.  It is responsible for finding the package, checking the
      version, and producing any needed messages.  Many find-modules provide
      limited or no support for versioning; check the module documentation.
      If no module is found the command proceeds to Config mode.
 
      The complete Config mode command signature is:
 
        find_package(<package> [version] [EXACT] [QUIET]
                      [[REQUIRED|COMPONENTS] [components...]] [NO_MODULE]
                      [NO_POLICY_SCOPE]
                      [NAMES name1 [name2 ...]]
                      [CONFIGS config1 [config2 ...]]
                      [HINTS path1 [path2 ... ]]
                      [PATHS path1 [path2 ... ]]
                      [PATH_SUFFIXES suffix1 [suffix2 ...]]
                      [NO_DEFAULT_PATH]
                      [NO_CMAKE_ENVIRONMENT_PATH]
                      [NO_CMAKE_PATH]
                      [NO_SYSTEM_ENVIRONMENT_PATH]
                      [NO_CMAKE_PACKAGE_REGISTRY]
                      [NO_CMAKE_BUILDS_PATH]
                      [NO_CMAKE_SYSTEM_PATH]
                      [CMAKE_FIND_ROOT_PATH_BOTH |
                      ONLY_CMAKE_FIND_ROOT_PATH |
                      NO_CMAKE_FIND_ROOT_PATH])
 
      The NO_MODULE option may be used to skip Module mode explicitly.  It
      is also implied by use of options not specified in the reduced
      signature.
 
      Config mode attempts to locate a configuration file provided by the
      package to be found.  A cache entry called <package>_DIR is created to
      hold the directory containing the file.  By default the command
      searches for a package with the name <package>.  If the NAMES option
      is given the names following it are used instead of <package>.  The
      command searches for a file called "<name>Config.cmake" or
      "<lower-case-name>-config.cmake" for each name specified.  A
      replacement set of possible configuration file names may be given
      using the CONFIGS option.  The search procedure is specified below.
      Once found, the configuration file is read and processed by CMake.
      Since the file is provided by the package it already knows the
      location of package contents.  The full path to the configuration file
      is stored in the cmake variable <package>_CONFIG.
 
      If the package configuration file cannot be found CMake will generate
      an error describing the problem unless the QUIET argument is
      specified.  If REQUIRED is specified and the package is not found a
      fatal error is generated and the configure step stops executing.  If
      <package>_DIR has been set to a directory not containing a
      configuration file CMake will ignore it and search from scratch.
 
      When the [version] argument is given Config mode will only find a
      version of the package that claims compatibility with the requested
      version (format is major[.minor[.patch[.tweak]]]).  If the EXACT
      option is given only a version of the package claiming an exact match
      of the requested version may be found.  CMake does not establish any
      convention for the meaning of version numbers.  Package version
      numbers are checked by "version" files provided by the packages
      themselves.  For a candidate package configuration file
      "<config-file>.cmake" the corresponding version file is located next
      to it and named either "<config-file>-version.cmake" or
      "<config-file>Version.cmake".  If no such version file is available
      then the configuration file is assumed to not be compatible with any
      requested version.  When a version file is found it is loaded to check
      the requested version number.  The version file is loaded in a nested
      scope in which the following variables have been defined:
 
        PACKAGE_FIND_NAME          = the <package> name
        PACKAGE_FIND_VERSION      = full requested version string
        PACKAGE_FIND_VERSION_MAJOR = major version if requested, else 0
        PACKAGE_FIND_VERSION_MINOR = minor version if requested, else 0
        PACKAGE_FIND_VERSION_PATCH = patch version if requested, else 0
        PACKAGE_FIND_VERSION_TWEAK = tweak version if requested, else 0
        PACKAGE_FIND_VERSION_COUNT = number of version components, 0 to 4
 
      The version file checks whether it satisfies the requested version and
      sets these variables:
 
        PACKAGE_VERSION            = full provided version string
        PACKAGE_VERSION_EXACT      = true if version is exact match
        PACKAGE_VERSION_COMPATIBLE = true if version is compatible
        PACKAGE_VERSION_UNSUITABLE = true if unsuitable as any version
 
      These variables are checked by the find_package command to determine
      whether the configuration file provides an acceptable version.  They
      are not available after the find_package call returns.  If the version
      is acceptable the following variables are set:
 
        <package>_VERSION      = full provided version string
        <package>_VERSION_MAJOR = major version if provided, else 0
        <package>_VERSION_MINOR = minor version if provided, else 0
        <package>_VERSION_PATCH = patch version if provided, else 0
        <package>_VERSION_TWEAK = tweak version if provided, else 0
        <package>_VERSION_COUNT = number of version components, 0 to 4
 
      and the corresponding package configuration file is loaded.  When
      multiple package configuration files are available whose version files
      claim compatibility with the version requested it is unspecified which
      one is chosen.  No attempt is made to choose a highest or closest
      version number.
 
      Config mode provides an elaborate interface and search procedure.
      Much of the interface is provided for completeness and for use
      internally by find-modules loaded by Module mode.  Most user code
      should simply call
 
        find_package(<package> [major[.minor]] [EXACT] [REQUIRED|QUIET])
 
      in order to find a package.  Package maintainers providing CMake
      package configuration files are encouraged to name and install them
      such that the procedure outlined below will find them without
      requiring use of additional options.
 
      CMake constructs a set of possible installation prefixes for the
      package.  Under each prefix several directories are searched for a
      configuration file.  The tables below show the directories searched.
      Each entry is meant for installation trees following Windows (W), UNIX
      (U), or Apple (A) conventions.
 
        <prefix>/                                              (W)
        <prefix>/(cmake|CMake)/                                (W)
        <prefix>/<name>*/                                      (W)
        <prefix>/<name>*/(cmake|CMake)/                        (W)
        <prefix>/(share|lib)/cmake/<name>*/                    (U)
        <prefix>/(share|lib)/<name>*/                          (U)
        <prefix>/(share|lib)/<name>*/(cmake|CMake)/            (U)
 
      On systems supporting OS X Frameworks and Application Bundles the
      following directories are searched for frameworks or bundles
      containing a configuration file:
 
        <prefix>/<name>.framework/Resources/                    (A)
        <prefix>/<name>.framework/Resources/CMake/              (A)
        <prefix>/<name>.framework/Versions/*/Resources/        (A)
        <prefix>/<name>.framework/Versions/*/Resources/CMake/  (A)
        <prefix>/<name>.app/Contents/Resources/                (A)
        <prefix>/<name>.app/Contents/Resources/CMake/          (A)
 
      In all cases the <name> is treated as case-insensitive and corresponds
      to any of the names specified (<package> or names given by NAMES).  If
      PATH_SUFFIXES is specified the suffixes are appended to each (W) or
      (U) directory entry one-by-one.
 
      This set of directories is intended to work in cooperation with
      projects that provide configuration files in their installation trees.
      Directories above marked with (W) are intended for installations on
      Windows where the prefix may point at the top of an application's
      installation directory.  Those marked with (U) are intended for
      installations on UNIX platforms where the prefix is shared by multiple
      packages.  This is merely a convention, so all (W) and (U) directories
      are still searched on all platforms.  Directories marked with (A) are
      intended for installations on Apple platforms.  The cmake variables
      CMAKE_FIND_FRAMEWORK and CMAKE_FIND_APPBUNDLE determine the order of
      preference as specified below.
 
      The set of installation prefixes is constructed using the following
      steps.  If NO_DEFAULT_PATH is specified all NO_* options are enabled.
 
      1.  Search paths specified in cmake-specific cache variables.  These
      are intended to be used on the command line with a -DVAR=value.  This
      can be skipped if NO_CMAKE_PATH is passed.
 
          CMAKE_PREFIX_PATH
          CMAKE_FRAMEWORK_PATH
          CMAKE_APPBUNDLE_PATH
 
      2.  Search paths specified in cmake-specific environment variables.
      These are intended to be set in the user's shell configuration.  This
      can be skipped if NO_CMAKE_ENVIRONMENT_PATH is passed.
 
          <package>_DIR
          CMAKE_PREFIX_PATH
          CMAKE_FRAMEWORK_PATH
          CMAKE_APPBUNDLE_PATH
 
      3.  Search paths specified by the HINTS option.  These should be paths
      computed by system introspection, such as a hint provided by the
      location of another item already found.  Hard-coded guesses should be
      specified with the PATHS option.
 
      4.  Search the standard system environment variables.  This can be
      skipped if NO_SYSTEM_ENVIRONMENT_PATH is passed.  Path entries ending
      in "/bin" or "/sbin" are automatically converted to their parent
      directories.
 
          PATH
 
      5.  Search project build trees recently configured in a CMake GUI.
      This can be skipped if NO_CMAKE_BUILDS_PATH is passed.  It is intended
      for the case when a user is building multiple dependent projects one
      after another.
 
      6.  Search paths stored in the CMake user package registry.  This can
      be skipped if NO_CMAKE_PACKAGE_REGISTRY is passed.  Paths are stored
      in the registry when CMake configures a project that invokes
      export(PACKAGE <name>).  See the export(PACKAGE) command documentation
      for more details.
 
      7.  Search cmake variables defined in the Platform files for the
      current system.  This can be skipped if NO_CMAKE_SYSTEM_PATH is
      passed.
 
          CMAKE_SYSTEM_PREFIX_PATH
          CMAKE_SYSTEM_FRAMEWORK_PATH
          CMAKE_SYSTEM_APPBUNDLE_PATH
 
      8.  Search paths specified by the PATHS option.  These are typically
      hard-coded guesses.
 
      On Darwin or systems supporting OS X Frameworks, the cmake variable
      CMAKE_FIND_FRAMEWORK can be set to empty or one of the following:
 
          "FIRST"  - Try to find frameworks before standard
                    libraries or headers. This is the default on Darwin.
          "LAST"  - Try to find frameworks after standard
                    libraries or headers.
          "ONLY"  - Only try to find frameworks.
          "NEVER" - Never try to find frameworks.
 
      On Darwin or systems supporting OS X Application Bundles, the cmake
      variable CMAKE_FIND_APPBUNDLE can be set to empty or one of the
      following:
 
          "FIRST"  - Try to find application bundles before standard
                    programs. This is the default on Darwin.
          "LAST"  - Try to find application bundles after standard
                    programs.
          "ONLY"  - Only try to find application bundles.
          "NEVER" - Never try to find application bundles.
 
      The CMake variable CMAKE_FIND_ROOT_PATH specifies one or more
      directories to be prepended to all other search directories.  This
      effectively "re-roots" the entire search under given locations.  By
      default it is empty.  It is especially useful when cross-compiling to
      point to the root directory of the target environment and CMake will
      search there too.  By default at first the directories listed in
      CMAKE_FIND_ROOT_PATH and then the non-rooted directories will be
      searched.  The default behavior can be adjusted by setting
      CMAKE_FIND_ROOT_PATH_MODE_PACKAGE.  This behavior can be manually
      overridden on a per-call basis.  By using CMAKE_FIND_ROOT_PATH_BOTH
      the search order will be as described above.  If
      NO_CMAKE_FIND_ROOT_PATH is used then CMAKE_FIND_ROOT_PATH will not be
      used.  If ONLY_CMAKE_FIND_ROOT_PATH is used then only the re-rooted
      directories will be searched.
 
      The default search order is designed to be most-specific to
      least-specific for common use cases.  Projects may override the order
      by simply calling the command multiple times and using the NO_*
      options:
 
          find_package(<package> PATHS paths... NO_DEFAULT_PATH)
          find_package(<package>)
 
      Once one of the calls succeeds the result variable will be set and
      stored in the cache so that no call will search again.
 
      See the cmake_policy() command documentation for discussion of the
      NO_POLICY_SCOPE option.
 
  find_path
      Find the directory containing a file.
 
          find_path(<VAR> name1 [path1 path2 ...])
 
      This is the short-hand signature for the command that is sufficient in
      many cases.  It is the same as find_path(<VAR> name1 [PATHS path1
      path2 ...])
 
          find_path(
                    <VAR>
                    name | NAMES name1 [name2 ...]
                    [HINTS path1 [path2 ... ENV var]]
                    [PATHS path1 [path2 ... ENV var]]
                    [PATH_SUFFIXES suffix1 [suffix2 ...]]
                    [DOC "cache documentation string"]
                    [NO_DEFAULT_PATH]
                    [NO_CMAKE_ENVIRONMENT_PATH]
                    [NO_CMAKE_PATH]
                    [NO_SYSTEM_ENVIRONMENT_PATH]
                    [NO_CMAKE_SYSTEM_PATH]
                    [CMAKE_FIND_ROOT_PATH_BOTH |
                    ONLY_CMAKE_FIND_ROOT_PATH |
                    NO_CMAKE_FIND_ROOT_PATH]
                  )
 
      This command is used to find a directory containing the named file.  A
      cache entry named by <VAR> is created to store the result of this
      command.  If the file in a directory is found the result is stored in
      the variable and the search will not be repeated unless the variable
      is cleared.  If nothing is found, the result will be <VAR>-NOTFOUND,
      and the search will be attempted again the next time find_path is
      invoked with the same variable.  The name of the file in a directory
      that is searched for is specified by the names listed after the NAMES
      argument.  Additional search locations can be specified after the
      PATHS argument.  If ENV var is found in the HINTS or PATHS section the
      environment variable var will be read and converted from a system
      environment variable to a cmake style list of paths.  For example ENV
      PATH would be a way to list the system path variable.  The argument
      after DOC will be used for the documentation string in the cache.
      PATH_SUFFIXES specifies additional subdirectories to check below each
      search path.
 
      If NO_DEFAULT_PATH is specified, then no additional paths are added to
      the search.  If NO_DEFAULT_PATH is not specified, the search process
      is as follows:
 
      1.  Search paths specified in cmake-specific cache variables.  These
      are intended to be used on the command line with a -DVAR=value.  This
      can be skipped if NO_CMAKE_PATH is passed.
 
          <prefix>/include for each <prefix> in CMAKE_PREFIX_PATH
          CMAKE_INCLUDE_PATH
          CMAKE_FRAMEWORK_PATH
 
      2.  Search paths specified in cmake-specific environment variables.
      These are intended to be set in the user's shell configuration.  This
      can be skipped if NO_CMAKE_ENVIRONMENT_PATH is passed.
 
          <prefix>/include for each <prefix> in CMAKE_PREFIX_PATH
          CMAKE_INCLUDE_PATH
          CMAKE_FRAMEWORK_PATH
 
      3.  Search the paths specified by the HINTS option.  These should be
      paths computed by system introspection, such as a hint provided by the
      location of another item already found.  Hard-coded guesses should be
      specified with the PATHS option.
 
      4.  Search the standard system environment variables.  This can be
      skipped if NO_SYSTEM_ENVIRONMENT_PATH is an argument.
 
          PATH
          INCLUDE
 
      5.  Search cmake variables defined in the Platform files for the
      current system.  This can be skipped if NO_CMAKE_SYSTEM_PATH is
      passed.
 
          <prefix>/include for each <prefix> in CMAKE_SYSTEM_PREFIX_PATH
          CMAKE_SYSTEM_INCLUDE_PATH
          CMAKE_SYSTEM_FRAMEWORK_PATH
 
      6.  Search the paths specified by the PATHS option or in the
      short-hand version of the command.  These are typically hard-coded
      guesses.
 
      On Darwin or systems supporting OS X Frameworks, the cmake variable
      CMAKE_FIND_FRAMEWORK can be set to empty or one of the following:
 
          "FIRST"  - Try to find frameworks before standard
                    libraries or headers. This is the default on Darwin.
          "LAST"  - Try to find frameworks after standard
                    libraries or headers.
          "ONLY"  - Only try to find frameworks.
          "NEVER" - Never try to find frameworks.
 
      On Darwin or systems supporting OS X Application Bundles, the cmake
      variable CMAKE_FIND_APPBUNDLE can be set to empty or one of the
      following:
 
          "FIRST"  - Try to find application bundles before standard
                    programs. This is the default on Darwin.
          "LAST"  - Try to find application bundles after standard
                    programs.
          "ONLY"  - Only try to find application bundles.
          "NEVER" - Never try to find application bundles.
 
      The CMake variable CMAKE_FIND_ROOT_PATH specifies one or more
      directories to be prepended to all other search directories.  This
      effectively "re-roots" the entire search under given locations.  By
      default it is empty.  It is especially useful when cross-compiling to
      point to the root directory of the target environment and CMake will
      search there too.  By default at first the directories listed in
      CMAKE_FIND_ROOT_PATH and then the non-rooted directories will be
      searched.  The default behavior can be adjusted by setting
      CMAKE_FIND_ROOT_PATH_MODE_INCLUDE.  This behavior can be manually
      overridden on a per-call basis.  By using CMAKE_FIND_ROOT_PATH_BOTH
      the search order will be as described above.  If
      NO_CMAKE_FIND_ROOT_PATH is used then CMAKE_FIND_ROOT_PATH will not be
      used.  If ONLY_CMAKE_FIND_ROOT_PATH is used then only the re-rooted
      directories will be searched.
 
      The default search order is designed to be most-specific to
      least-specific for common use cases.  Projects may override the order
      by simply calling the command multiple times and using the NO_*
      options:
 
          find_path(<VAR> NAMES name PATHS paths... NO_DEFAULT_PATH)
          find_path(<VAR> NAMES name)
 
      Once one of the calls succeeds the result variable will be set and
      stored in the cache so that no call will search again.
 
      When searching for frameworks, if the file is specified as A/b.h, then
      the framework search will look for A.framework/Headers/b.h.  If that
      is found the path will be set to the path to the framework.  CMake
      will convert this to the correct -F option to include the file.
 
  find_program
      Find an executable program.
 
          find_program(<VAR> name1 [path1 path2 ...])
 
      This is the short-hand signature for the command that is sufficient in
      many cases.  It is the same as find_program(<VAR> name1 [PATHS path1
      path2 ...])
 
          find_program(
                    <VAR>
                    name | NAMES name1 [name2 ...]
                    [HINTS path1 [path2 ... ENV var]]
                    [PATHS path1 [path2 ... ENV var]]
                    [PATH_SUFFIXES suffix1 [suffix2 ...]]
                    [DOC "cache documentation string"]
                    [NO_DEFAULT_PATH]
                    [NO_CMAKE_ENVIRONMENT_PATH]
                    [NO_CMAKE_PATH]
                    [NO_SYSTEM_ENVIRONMENT_PATH]
                    [NO_CMAKE_SYSTEM_PATH]
                    [CMAKE_FIND_ROOT_PATH_BOTH |
                    ONLY_CMAKE_FIND_ROOT_PATH |
                    NO_CMAKE_FIND_ROOT_PATH]
                  )
 
      This command is used to find a program.  A cache entry named by <VAR>
      is created to store the result of this command.  If the program is
      found the result is stored in the variable and the search will not be
      repeated unless the variable is cleared.  If nothing is found, the
      result will be <VAR>-NOTFOUND, and the search will be attempted again
      the next time find_program is invoked with the same variable.  The
      name of the program that is searched for is specified by the names
      listed after the NAMES argument.  Additional search locations can be
      specified after the PATHS argument.  If ENV var is found in the HINTS
      or PATHS section the environment variable var will be read and
      converted from a system environment variable to a cmake style list of
      paths.  For example ENV PATH would be a way to list the system path
      variable.  The argument after DOC will be used for the documentation
      string in the cache.  PATH_SUFFIXES specifies additional
      subdirectories to check below each search path.
 
      If NO_DEFAULT_PATH is specified, then no additional paths are added to
      the search.  If NO_DEFAULT_PATH is not specified, the search process
      is as follows:
 
      1.  Search paths specified in cmake-specific cache variables.  These
      are intended to be used on the command line with a -DVAR=value.  This
      can be skipped if NO_CMAKE_PATH is passed.
 
          <prefix>/[s]bin for each <prefix> in CMAKE_PREFIX_PATH
          CMAKE_PROGRAM_PATH
          CMAKE_APPBUNDLE_PATH
 
      2.  Search paths specified in cmake-specific environment variables.
      These are intended to be set in the user's shell configuration.  This
      can be skipped if NO_CMAKE_ENVIRONMENT_PATH is passed.
 
          <prefix>/[s]bin for each <prefix> in CMAKE_PREFIX_PATH
          CMAKE_PROGRAM_PATH
          CMAKE_APPBUNDLE_PATH
 
      3.  Search the paths specified by the HINTS option.  These should be
      paths computed by system introspection, such as a hint provided by the
      location of another item already found.  Hard-coded guesses should be
      specified with the PATHS option.
 
      4.  Search the standard system environment variables.  This can be
      skipped if NO_SYSTEM_ENVIRONMENT_PATH is an argument.
 
          PATH
         
 
      5.  Search cmake variables defined in the Platform files for the
      current system.  This can be skipped if NO_CMAKE_SYSTEM_PATH is
      passed.
 
          <prefix>/[s]bin for each <prefix> in CMAKE_SYSTEM_PREFIX_PATH
          CMAKE_SYSTEM_PROGRAM_PATH
          CMAKE_SYSTEM_APPBUNDLE_PATH
 
      6.  Search the paths specified by the PATHS option or in the
      short-hand version of the command.  These are typically hard-coded
      guesses.
 
      On Darwin or systems supporting OS X Frameworks, the cmake variable
      CMAKE_FIND_FRAMEWORK can be set to empty or one of the following:
 
          "FIRST"  - Try to find frameworks before standard
                    libraries or headers. This is the default on Darwin.
          "LAST"  - Try to find frameworks after standard
                    libraries or headers.
          "ONLY"  - Only try to find frameworks.
          "NEVER" - Never try to find frameworks.
 
      On Darwin or systems supporting OS X Application Bundles, the cmake
      variable CMAKE_FIND_APPBUNDLE can be set to empty or one of the
      following:
 
          "FIRST"  - Try to find application bundles before standard
                    programs. This is the default on Darwin.
          "LAST"  - Try to find application bundles after standard
                    programs.
          "ONLY"  - Only try to find application bundles.
          "NEVER" - Never try to find application bundles.
 
      The CMake variable CMAKE_FIND_ROOT_PATH specifies one or more
      directories to be prepended to all other search directories.  This
      effectively "re-roots" the entire search under given locations.  By
      default it is empty.  It is especially useful when cross-compiling to
      point to the root directory of the target environment and CMake will
      search there too.  By default at first the directories listed in
      CMAKE_FIND_ROOT_PATH and then the non-rooted directories will be
      searched.  The default behavior can be adjusted by setting
      CMAKE_FIND_ROOT_PATH_MODE_PROGRAM.  This behavior can be manually
      overridden on a per-call basis.  By using CMAKE_FIND_ROOT_PATH_BOTH
      the search order will be as described above.  If
      NO_CMAKE_FIND_ROOT_PATH is used then CMAKE_FIND_ROOT_PATH will not be
      used.  If ONLY_CMAKE_FIND_ROOT_PATH is used then only the re-rooted
      directories will be searched.
 
      The default search order is designed to be most-specific to
      least-specific for common use cases.  Projects may override the order
      by simply calling the command multiple times and using the NO_*
      options:
 
          find_program(<VAR> NAMES name PATHS paths... NO_DEFAULT_PATH)
          find_program(<VAR> NAMES name)
 
      Once one of the calls succeeds the result variable will be set and
      stored in the cache so that no call will search again.
 
  fltk_wrap_ui
      Create FLTK user interfaces Wrappers.
 
        fltk_wrap_ui(resultingLibraryName source1
                      source2 ... sourceN )
 
      Produce .h and .cxx files for all the .fl and .fld files listed.  The
      resulting .h and .cxx files will be added to a variable named
      resultingLibraryName_FLTK_UI_SRCS which should be added to your
      library.
 
  foreach
      Evaluate a group of commands for each value in a list.
 
        foreach(loop_var arg1 arg2 ...)
          COMMAND1(ARGS ...)
          COMMAND2(ARGS ...)
          ...
        endforeach(loop_var)
 
      All commands between foreach and the matching endforeach are recorded
      without being invoked.  Once the endforeach is evaluated, the recorded
      list of commands is invoked once for each argument listed in the
      original foreach command.  Before each iteration of the loop
      "${loop_var}" will be set as a variable with the current value in the
      list.
 
        foreach(loop_var RANGE total)
        foreach(loop_var RANGE start stop [step])
 
      Foreach can also iterate over a generated range of numbers.  There are
      three types of this iteration:
 
      * When specifying single number, the range will have elements 0 to
      "total".
 
      * When specifying two numbers, the range will have elements from the
      first number to the second number.
 
      * The third optional number is the increment used to iterate from the
      first number to the second number.
 
        foreach(loop_var IN [LISTS [list1 [...]]]
                            [ITEMS [item1 [...]]])
 
      Iterates over a precise list of items.  The LISTS option names
      list-valued variables to be traversed, including empty elements (an
      empty string is a zero-length list).  The ITEMS option ends argument
      parsing and includes all arguments following it in the iteration.
 
  function
      Start recording a function for later invocation as a command.
 
        function(<name> [arg1 [arg2 [arg3 ...]]])
          COMMAND1(ARGS ...)
          COMMAND2(ARGS ...)
          ...
        endfunction(<name>)
 
      Define a function named <name> that takes arguments named arg1 arg2
      arg3 (...).  Commands listed after function, but before the matching
      endfunction, are not invoked until the function is invoked.  When it
      is invoked, the commands recorded in the function are first modified
      by replacing formal parameters (${arg1}) with the arguments passed,
      and then invoked as normal commands.  In addition to referencing the
      formal parameters you can reference the variable ARGC which will be
      set to the number of arguments passed into the function as well as
      ARGV0 ARGV1 ARGV2 ...  which will have the actual values of the
      arguments passed in.  This facilitates creating functions with
      optional arguments.  Additionally ARGV holds the list of all arguments
      given to the function and ARGN holds the list of argument past the
      last expected argument.
 
      See the cmake_policy() command documentation for the behavior of
      policies inside functions.
 
  get_cmake_property
      Get a property of the CMake instance.
 
        get_cmake_property(VAR property)
 
      Get a property from the CMake instance.  The value of the property is
      stored in the variable VAR.  If the property is not found, CMake will
      report an error.  Some supported properties include: VARIABLES,
      CACHE_VARIABLES, COMMANDS, MACROS, and COMPONENTS.
 
  get_directory_property
      Get a property of DIRECTORY scope.
 
        get_directory_property(<variable> [DIRECTORY <dir>] <prop-name>)
 
      Store a property of directory scope in the named variable.  If the
      property is not defined the empty-string is returned.  The DIRECTORY
      argument specifies another directory from which to retrieve the
      property value.  The specified directory must have already been
      traversed by CMake.
 
        get_directory_property(<variable> [DIRECTORY <dir>]
                                DEFINITION <var-name>)
 
      Get a variable definition from a directory.  This form is useful to
      get a variable definition from another directory.
 
  get_filename_component
      Get a specific component of a full filename.
 
        get_filename_component(<VAR> FileName
                                PATH|ABSOLUTE|NAME|EXT|NAME_WE|REALPATH
                                [CACHE])
 
      Set <VAR> to be the path (PATH), file name (NAME), file extension
      (EXT), file name without extension (NAME_WE) of FileName, the full
      path (ABSOLUTE), or the full path with all symlinks resolved
      (REALPATH).  Note that the path is converted to Unix slashes format
      and has no trailing slashes.  The longest file extension is always
      considered.  If the optional CACHE argument is specified, the result
      variable is added to the cache.
 
        get_filename_component(<VAR> FileName
                                PROGRAM [PROGRAM_ARGS <ARG_VAR>]
                                [CACHE])
 
      The program in FileName will be found in the system search path or
      left as a full path.  If PROGRAM_ARGS is present with PROGRAM, then
      any command-line arguments present in the FileName string are split
      from the program name and stored in <ARG_VAR>.  This is used to
      separate a program name from its arguments in a command line string.
 
  get_property
      Get a property.
 
        get_property(<variable>
                      <GLOBAL            |
                      DIRECTORY [dir]    |
                      TARGET    <target> |
                      SOURCE    <source> |
                      TEST      <test>  |
                      CACHE    <entry>  |
                      VARIABLE>
                      PROPERTY <name>
                      [SET | DEFINED | BRIEF_DOCS | FULL_DOCS])
 
      Get one property from one object in a scope.  The first argument
      specifies the variable in which to store the result.  The second
      argument determines the scope from which to get the property.  It must
      be one of the following:
 
      GLOBAL scope is unique and does not accept a name.
 
      DIRECTORY scope defaults to the current directory but another
      directory (already processed by CMake) may be named by full or
      relative path.
 
      TARGET scope must name one existing target.
 
      SOURCE scope must name one source file.
 
      TEST scope must name one existing test.
 
      CACHE scope must name one cache entry.
 
      VARIABLE scope is unique and does not accept a name.
 
      The required PROPERTY option is immediately followed by the name of
      the property to get.  If the property is not set an empty value is
      returned.  If the SET option is given the variable is set to a boolean
      value indicating whether the property has been set.  If the DEFINED
      option is given the variable is set to a boolean value indicating
      whether the property has been defined such as with define_property.
      If BRIEF_DOCS or FULL_DOCS is given then the variable is set to a
      string containing documentation for the requested property.  If
      documentation is requested for a property that has not been defined
      NOTFOUND is returned.
 
  get_source_file_property
      Get a property for a source file.
 
        get_source_file_property(VAR file property)
 
      Get a property from a source file.  The value of the property is
      stored in the variable VAR.  If the property is not found, VAR will be
      set to "NOTFOUND".  Use set_source_files_properties to set property
      values.  Source file properties usually control how the file is built.
      One property that is always there is LOCATION
 
  get_target_property
      Get a property from a target.
 
        get_target_property(VAR target property)
 
      Get a property from a target.  The value of the property is stored in
      the variable VAR.  If the property is not found, VAR will be set to
      "NOTFOUND".  Use set_target_properties to set property values.
      Properties are usually used to control how a target is built, but some
      query the target instead.  This command can get properties for any
      target so far created.  The targets do not need to be in the current
      CMakeLists.txt file.
 
  get_test_property
      Get a property of the test.
 
        get_test_property(test VAR property)
 
      Get a property from the Test.  The value of the property is stored in
      the variable VAR.  If the property is not found, CMake will report an
      error.  For a list of standard properties you can type cmake
      --help-property-list
 
  if
      Conditionally execute a group of commands.
 
        if(expression)
          # then section.
          COMMAND1(ARGS ...)
          COMMAND2(ARGS ...)
          ...
        elseif(expression2)
          # elseif section.
          COMMAND1(ARGS ...)
          COMMAND2(ARGS ...)
          ...
        else(expression)
          # else section.
          COMMAND1(ARGS ...)
          COMMAND2(ARGS ...)
          ...
        endif(expression)
 
      Evaluates the given expression.  If the result is true, the commands
      in the THEN section are invoked.  Otherwise, the commands in the else
      section are invoked.  The elseif and else sections are optional.  You
      may have multiple elseif clauses.  Note that the expression in the
      else and endif clause is optional.  Long expressions can be used and
      there is a traditional order of precedence.  Parenthetical expressions
      are evaluated first followed by unary operators such as EXISTS,
      COMMAND, and DEFINED.  Then any EQUAL, LESS, GREATER, STRLESS,
      STRGREATER, STREQUAL, MATCHES will be evaluated.  Then NOT operators
      and finally AND, OR operators will be evaluated.  Possible expressions
      are:
 
        if(<constant>)
 
      True if the constant is 1, ON, YES, TRUE, Y, or a non-zero number.
      False if the constant is 0, OFF, NO, FALSE, N, IGNORE, "", or ends in
      the suffix '-NOTFOUND'.  Named boolean constants are case-insensitive.
 
        if(<variable>)
 
      True if the variable's value is not a false constant.
 
        if(NOT <expression>)
 
      True if the expression is not true.
 
        if(<expr1> AND <expr2>)
 
      True if both expressions would be considered true individually.
 
        if(<expr1> OR <expr2>)
 
      True if either expression would be considered true individually.
 
        if(COMMAND command-name)
 
      True if the given name is a command, macro or function that can be
      invoked.
 
        if(POLICY policy-id)
 
      True if the given name is an existing policy (of the form CMP<NNNN>).
 
        if(TARGET target-name)
 
      True if the given name is an existing target, built or imported.
 
        if(EXISTS file-name)
        if(EXISTS directory-name)
 
      True if the named file or directory exists.  Behavior is well-defined
      only for full paths.
 
        if(file1 IS_NEWER_THAN file2)
 
      True if file1 is newer than file2 or if one of the two files doesn't
      exist.  Behavior is well-defined only for full paths.
 
        if(IS_DIRECTORY directory-name)
 
      True if the given name is a directory.  Behavior is well-defined only
      for full paths.
 
        if(IS_SYMLINK file-name)
 
      True if the given name is a symbolic link.  Behavior is well-defined
      only for full paths.
 
        if(IS_ABSOLUTE path)
 
      True if the given path is an absolute path.
 
        if(variable MATCHES regex)
        if(string MATCHES regex)
 
      True if the given string or variable's value matches the given regular
      expression.
 
        if(variable LESS number)
        if(string LESS number)
        if(variable GREATER number)
        if(string GREATER number)
        if(variable EQUAL number)
        if(string EQUAL number)
 
      True if the given string or variable's value is a valid number and the
      inequality or equality is true.
 
        if(variable STRLESS string)
        if(string STRLESS string)
        if(variable STRGREATER string)
        if(string STRGREATER string)
        if(variable STREQUAL string)
        if(string STREQUAL string)
 
      True if the given string or variable's value is lexicographically less
      (or greater, or equal) than the string or variable on the right.
 
        if(version1 VERSION_LESS version2)
        if(version1 VERSION_EQUAL version2)
        if(version1 VERSION_GREATER version2)
 
      Component-wise integer version number comparison (version format is
      major[.minor[.patch[.tweak]]]).
 
        if(DEFINED variable)
 
      True if the given variable is defined.  It does not matter if the
      variable is true or false just if it has been set.
 
        if((expression) AND (expression OR (expression)))
 
      The expressions inside the parenthesis are evaluated first and then
      the remaining expression is evaluated as in the previous examples.
      Where there are nested parenthesis the innermost are evaluated as part
      of evaluating the expression that contains them.
 
      The if statement was written fairly early in CMake's history and it
      has some convenience features that are worth covering.  The if
      statement reduces operations until there is a single remaining value,
      at that point if the case insensitive value is: ON, 1, YES, TRUE, Y it
      returns true, if it is OFF, 0, NO, FALSE, N, NOTFOUND, *-NOTFOUND,
      IGNORE it will return false.
 
      This is fairly reasonable.  The convenience feature that sometimes
      throws new authors is how CMake handles values that do not match the
      true or false list.  Those values are treated as variables and are
      dereferenced even though they do not have the required ${} syntax.
      This means that if you write
 
        if (boobah)
 
      CMake will treat it as if you wrote
 
        if (${boobah})
 
      likewise if you write
 
        if (fubar AND sol)
 
      CMake will conveniently treat it as
 
        if ("${fubar}" AND "${sol}")
 
      The later is really the correct way to write it, but the former will
      work as well.  Only some operations in the if statement have this
      special handling of arguments.  The specific details follow:
 
      1) The left hand argument to MATCHES is first checked to see if it is
      a defined variable, if so the variable's value is used, otherwise the
      original value is used.
 
      2) If the left hand argument to MATCHES is missing it returns false
      without error
 
      3) Both left and right hand arguments to LESS GREATER EQUAL are
      independently tested to see if they are defined variables, if so their
      defined values are used otherwise the original value is used.
 
      4) Both left and right hand arguments to STRLESS STREQUAL STRGREATER
      are independently tested to see if they are defined variables, if so
      their defined values are used otherwise the original value is used.
 
      5) Both left and right hand argumemnts to VERSION_LESS VERSION_EQUAL
      VERSION_GREATER are independently tested to see if they are defined
      variables, if so their defined values are used otherwise the original
      value is used.
 
      6) The right hand argument to NOT is tested to see if it is a boolean
      constant, if so the value is used, otherwise it is assumed to be a
      variable and it is dereferenced.
 
      7) The left and right hand arguments to AND OR are independently
      tested to see if they are boolean constants, if so they are used as
      such, otherwise they are assumed to be variables and are dereferenced.
 
 
 
  include
      Read CMake listfile code from the given file.
 
        include(<file|module> [OPTIONAL] [RESULT_VARIABLE <VAR>]
                              [NO_POLICY_SCOPE])
 
      Reads CMake listfile code from the given file.  Commands in the file
      are processed immediately as if they were written in place of the
      include command.  If OPTIONAL is present, then no error is raised if
      the file does not exist.  If RESULT_VARIABLE is given the variable
      will be set to the full filename which has been included or NOTFOUND
      if it failed.
 
      If a module is specified instead of a file, the file with name
      <modulename>.cmake is searched in the CMAKE_MODULE_PATH.
 
      See the cmake_policy() command documentation for discussion of the
      NO_POLICY_SCOPE option.
 
  include_directories
      Add include directories to the build.
 
        include_directories([AFTER|BEFORE] [SYSTEM] dir1 dir2 ...)
 
      Add the given directories to those searched by the compiler for
      include files.  By default the directories are appended onto the
      current list of directories.  This default behavior can be changed by
      setting CMAKE_include_directories_BEFORE to ON.  By using BEFORE or
      AFTER you can select between appending and prepending, independent
      from the default.  If the SYSTEM option is given the compiler will be
      told that the directories are meant as system include directories on
      some platforms.
 
  include_external_msproject
      Include an external Microsoft project file in a workspace.
 
        include_external_msproject(projectname location
                                    dep1 dep2 ...)
 
      Includes an external Microsoft project in the generated workspace
      file.  Currently does nothing on UNIX.  This will create a target
      named [projectname].  This can be used in the add_dependencies command
      to make things depend on the external project.
 
  include_regular_expression
      Set the regular expression used for dependency checking.
 
        include_regular_expression(regex_match [regex_complain])
 
      Set the regular expressions used in dependency checking.  Only files
      matching regex_match will be traced as dependencies.  Only files
      matching regex_complain will generate warnings if they cannot be found
      (standard header paths are not searched).  The defaults are:
 
        regex_match    = "^.*$" (match everything)
        regex_complain = "^$" (match empty string only)
 
  install
      Specify rules to run at install time.
 
      This command generates installation rules for a project.  Rules
      specified by calls to this command within a source directory are
      executed in order during installation.  The order across directories
      is not defined.
 
      There are multiple signatures for this command.  Some of them define
      installation properties for files and targets.  Properties common to
      multiple signatures are covered here but they are valid only for
      signatures that specify them.
 
      DESTINATION arguments specify the directory on disk to which a file
      will be installed.  If a full path (with a leading slash or drive
      letter) is given it is used directly.  If a relative path is given it
      is interpreted relative to the value of CMAKE_INSTALL_PREFIX.
 
      PERMISSIONS arguments specify permissions for installed files.  Valid
      permissions are OWNER_READ, OWNER_WRITE, OWNER_EXECUTE, GROUP_READ,
      GROUP_WRITE, GROUP_EXECUTE, WORLD_READ, WORLD_WRITE, WORLD_EXECUTE,
      SETUID, and SETGID.  Permissions that do not make sense on certain
      platforms are ignored on those platforms.
 
      The CONFIGURATIONS argument specifies a list of build configurations
      for which the install rule applies (Debug, Release, etc.).
 
      The COMPONENT argument specifies an installation component name with
      which the install rule is associated, such as "runtime" or
      "development".  During component-specific installation only install
      rules associated with the given component name will be executed.
      During a full installation all components are installed.
 
      The RENAME argument specifies a name for an installed file that may be
      different from the original file.  Renaming is allowed only when a
      single file is installed by the command.
 
      The OPTIONAL argument specifies that it is not an error if the file to
      be installed does not exist.
 
      The TARGETS signature:
 
        install(TARGETS targets... [EXPORT <export-name>]
                [[ARCHIVE|LIBRARY|RUNTIME|FRAMEWORK|BUNDLE|
                  PRIVATE_HEADER|PUBLIC_HEADER|RESOURCE]
                  [DESTINATION <dir>]
                  [PERMISSIONS permissions...]
                  [CONFIGURATIONS [Debug|Release|...]]
                  [COMPONENT <component>]
                  [OPTIONAL] [NAMELINK_ONLY|NAMELINK_SKIP]
                ] [...])
 
      The TARGETS form specifies rules for installing targets from a
      project.  There are five kinds of target files that may be installed:
      ARCHIVE, LIBRARY, RUNTIME, FRAMEWORK, and BUNDLE.  Executables are
      treated as RUNTIME targets, except that those marked with the
      MACOSX_BUNDLE property are treated as BUNDLE targets on OS X.  Static
      libraries are always treated as ARCHIVE targets.  Module libraries are
      always treated as LIBRARY targets.  For non-DLL platforms shared
      libraries are treated as LIBRARY targets, except that those marked
      with the FRAMEWORK property are treated as FRAMEWORK targets on OS X.
      For DLL platforms the DLL part of a shared library is treated as a
      RUNTIME target and the corresponding import library is treated as an
      ARCHIVE target.  All Windows-based systems including Cygwin are DLL
      platforms.  The ARCHIVE, LIBRARY, RUNTIME, and FRAMEWORK arguments
      change the type of target to which the subsequent properties apply.
      If none is given the installation properties apply to all target
      types.  If only one is given then only targets of that type will be
      installed (which can be used to install just a DLL or just an import
      library).
 
      The PRIVATE_HEADER, PUBLIC_HEADER, and RESOURCE arguments cause
      subsequent properties to be applied to installing a FRAMEWORK shared
      library target's associated files on non-Apple platforms.  Rules
      defined by these arguments are ignored on Apple platforms because the
      associated files are installed into the appropriate locations inside
      the framework folder.  See documentation of the PRIVATE_HEADER,
      PUBLIC_HEADER, and RESOURCE target properties for details.
 
      Either NAMELINK_ONLY or NAMELINK_SKIP may be specified as a LIBRARY
      option.  On some platforms a versioned shared library has a symbolic
      link such as
 
        lib<name>.so -> lib<name>.so.1
 
      where "lib<name>.so.1" is the soname of the library and "lib<name>.so"
      is a "namelink" allowing linkers to find the library when given
      "-l<name>".  The NAMELINK_ONLY option causes installation of only the
      namelink when a library target is installed.  The NAMELINK_SKIP option
      causes installation of library files other than the namelink when a
      library target is installed.  When neither option is given both
      portions are installed.  On platforms where versioned shared libraries
      do not have namelinks or when a library is not versioned the
      NAMELINK_SKIP option installs the library and the NAMELINK_ONLY option
      installs nothing.  See the VERSION and SOVERSION target properties for
      details on creating versioned shared libraries.
 
      One or more groups of properties may be specified in a single call to
      the TARGETS form of this command.  A target may be installed more than
      once to different locations.  Consider hypothetical targets "myExe",
      "mySharedLib", and "myStaticLib".  The code
 
          install(TARGETS myExe mySharedLib myStaticLib
                  RUNTIME DESTINATION bin
                  LIBRARY DESTINATION lib
                  ARCHIVE DESTINATION lib/static)
          install(TARGETS mySharedLib DESTINATION /some/full/path)
 
      will install myExe to <prefix>/bin and myStaticLib to
      <prefix>/lib/static.  On non-DLL platforms mySharedLib will be
      installed to <prefix>/lib and /some/full/path.  On DLL platforms the
      mySharedLib DLL will be installed to <prefix>/bin and /some/full/path
      and its import library will be installed to <prefix>/lib/static and
      /some/full/path.  On non-DLL platforms mySharedLib will be installed
      to <prefix>/lib and /some/full/path.
 
      The EXPORT option associates the installed target files with an export
      called <export-name>.  It must appear before any RUNTIME, LIBRARY, or
      ARCHIVE options.  See documentation of the install(EXPORT ...)
      signature below for details.
 
      Installing a target with EXCLUDE_FROM_ALL set to true has undefined
      behavior.
 
      The FILES signature:
 
        install(FILES files... DESTINATION <dir>
                [PERMISSIONS permissions...]
                [CONFIGURATIONS [Debug|Release|...]]
                [COMPONENT <component>]
                [RENAME <name>] [OPTIONAL])
 
      The FILES form specifies rules for installing files for a project.
      File names given as relative paths are interpreted with respect to the
      current source directory.  Files installed by this form are by default
      given permissions OWNER_WRITE, OWNER_READ, GROUP_READ, and WORLD_READ
      if no PERMISSIONS argument is given.
 
      The PROGRAMS signature:
 
        install(PROGRAMS files... DESTINATION <dir>
                [PERMISSIONS permissions...]
                [CONFIGURATIONS [Debug|Release|...]]
                [COMPONENT <component>]
                [RENAME <name>] [OPTIONAL])
 
      The PROGRAMS form is identical to the FILES form except that the
      default permissions for the installed file also include OWNER_EXECUTE,
      GROUP_EXECUTE, and WORLD_EXECUTE.  This form is intended to install
      programs that are not targets, such as shell scripts.  Use the TARGETS
      form to install targets built within the project.
 
      The DIRECTORY signature:
 
        install(DIRECTORY dirs... DESTINATION <dir>
                [FILE_PERMISSIONS permissions...]
                [DIRECTORY_PERMISSIONS permissions...]
                [USE_SOURCE_PERMISSIONS] [OPTIONAL]
                [CONFIGURATIONS [Debug|Release|...]]
                [COMPONENT <component>] [FILES_MATCHING]
                [[PATTERN <pattern> | REGEX <regex>]
                  [EXCLUDE] [PERMISSIONS permissions...]] [...])
 
      The DIRECTORY form installs contents of one or more directories to a
      given destination.  The directory structure is copied verbatim to the
      destination.  The last component of each directory name is appended to
      the destination directory but a trailing slash may be used to avoid
      this because it leaves the last component empty.  Directory names
      given as relative paths are interpreted with respect to the current
      source directory.  If no input directory names are given the
      destination directory will be created but nothing will be installed
      into it.  The FILE_PERMISSIONS and DIRECTORY_PERMISSIONS options
      specify permissions given to files and directories in the destination.
      If USE_SOURCE_PERMISSIONS is specified and FILE_PERMISSIONS is not,
      file permissions will be copied from the source directory structure.
      If no permissions are specified files will be given the default
      permissions specified in the FILES form of the command, and the
      directories will be given the default permissions specified in the
      PROGRAMS form of the command.
 
      Installation of directories may be controlled with fine granularity
      using the PATTERN or REGEX options.  These "match" options specify a
      globbing pattern or regular expression to match directories or files
      encountered within input directories.  They may be used to apply
      certain options (see below) to a subset of the files and directories
      encountered.  The full path to each input file or directory (with
      forward slashes) is matched against the expression.  A PATTERN will
      match only complete file names: the portion of the full path matching
      the pattern must occur at the end of the file name and be preceded by
      a slash.  A REGEX will match any portion of the full path but it may
      use '/' and '$' to simulate the PATTERN behavior.  By default all
      files and directories are installed whether or not they are matched.
      The FILES_MATCHING option may be given before the first match option
      to disable installation of files (but not directories) not matched by
      any expression.  For example, the code
 
        install(DIRECTORY src/ DESTINATION include/myproj
                FILES_MATCHING PATTERN "*.h")
 
      will extract and install header files from a source tree.
 
      Some options may follow a PATTERN or REGEX expression and are applied
      only to files or directories matching them.  The EXCLUDE option will
      skip the matched file or directory.  The PERMISSIONS option overrides
      the permissions setting for the matched file or directory.  For
      example the code
 
        install(DIRECTORY icons scripts/ DESTINATION share/myproj
                PATTERN "CVS" EXCLUDE
                PATTERN "scripts/*"
                PERMISSIONS OWNER_EXECUTE OWNER_WRITE OWNER_READ
                            GROUP_EXECUTE GROUP_READ)
 
      will install the icons directory to share/myproj/icons and the scripts
      directory to share/myproj.  The icons will get default file
      permissions, the scripts will be given specific permissions, and any
      CVS directories will be excluded.
 
      The SCRIPT and CODE signature:
 
        install([[SCRIPT <file>] [CODE <code>]] [...])
 
      The SCRIPT form will invoke the given CMake script files during
      installation.  If the script file name is a relative path it will be
      interpreted with respect to the current source directory.  The CODE
      form will invoke the given CMake code during installation.  Code is
      specified as a single argument inside a double-quoted string.  For
      example, the code
 
        install(CODE "MESSAGE(\"Sample install message.\")")
 
      will print a message during installation.
 
      The EXPORT signature:
 
        install(EXPORT <export-name> DESTINATION <dir>
                [NAMESPACE <namespace>] [FILE <name>.cmake]
                [PERMISSIONS permissions...]
                [CONFIGURATIONS [Debug|Release|...]]
                [COMPONENT <component>])
 
      The EXPORT form generates and installs a CMake file containing code to
      import targets from the installation tree into another project.
      Target installations are associated with the export <export-name>
      using the EXPORT option of the install(TARGETS ...) signature
      documented above.  The NAMESPACE option will prepend <namespace> to
      the target names as they are written to the import file.  By default
      the generated file will be called <export-name>.cmake but the FILE
      option may be used to specify a different name.  The value given to
      the FILE option must be a file name with the ".cmake" extension.  If a
      CONFIGURATIONS option is given then the file will only be installed
      when one of the named configurations is installed.  Additionally, the
      generated import file will reference only the matching target
      configurations.  If a COMPONENT option is specified that does not
      match that given to the targets associated with <export-name> the
      behavior is undefined.  If a library target is included in the export
      but a target to which it links is not included the behavior is
      unspecified.
 
      The EXPORT form is useful to help outside projects use targets built
      and installed by the current project.  For example, the code
 
        install(TARGETS myexe EXPORT myproj DESTINATION bin)
        install(EXPORT myproj NAMESPACE mp_ DESTINATION lib/myproj)
 
      will install the executable myexe to <prefix>/bin and code to import
      it in the file "<prefix>/lib/myproj/myproj.cmake".  An outside project
      may load this file with the include command and reference the myexe
      executable from the installation tree using the imported target name
      mp_myexe as if the target were built in its own tree.
 
      NOTE: This command supercedes the INSTALL_TARGETS command and the
      target properties PRE_INSTALL_SCRIPT and POST_INSTALL_SCRIPT.  It also
      replaces the FILES forms of the INSTALL_FILES and INSTALL_PROGRAMS
      commands.  The processing order of these install rules relative to
      those generated by INSTALL_TARGETS, INSTALL_FILES, and
      INSTALL_PROGRAMS commands is not defined.
 
 
  link_directories
      Specify directories in which the linker will look for libraries.
 
        link_directories(directory1 directory2 ...)
 
      Specify the paths in which the linker should search for libraries.
      The command will apply only to targets created after it is called.
      For historical reasons, relative paths given to this command are
      passed to the linker unchanged (unlike many CMake commands which
      interpret them relative to the current source directory).
 
  list
      List operations.
 
        list(LENGTH <list> <output variable>)
        list(GET <list> <element index> [<element index> ...]
              <output variable>)
        list(APPEND <list> <element> [<element> ...])
        list(FIND <list> <value> <output variable>)
        list(INSERT <list> <element_index> <element> [<element> ...])
        list(REMOVE_ITEM <list> <value> [<value> ...])
        list(REMOVE_AT <list> <index> [<index> ...])
        list(REMOVE_DUPLICATES <list>)
        list(REVERSE <list>)
        list(SORT <list>)
 
      LENGTH will return a given list's length.
 
      GET will return list of elements specified by indices from the list.
 
      APPEND will append elements to the list.
 
      FIND will return the index of the element specified in the list or -1
      if it wasn't found.
 
      INSERT will insert elements to the list to the specified location.
 
      REMOVE_AT and REMOVE_ITEM will remove items from the list.  The
      difference is that REMOVE_ITEM will remove the given items, while
      REMOVE_AT will remove the items at the given indices.
 
      REMOVE_DUPLICATES will remove duplicated items in the list.
 
      REVERSE reverses the contents of the list in-place.
 
      SORT sorts the list in-place alphabetically.
 
      NOTES: A list in cmake is a ; separated group of strings.  To create a
      list the set command can be used.  For example, set(var a b c d e)
      creates a list with a;b;c;d;e, and set(var "a b c d e") creates a
      string or a list with one item in it.
 
      When specifying index values, if <element index> is 0 or greater, it
      is indexed from the beginning of the list, with 0 representing the
      first list element.  If <element index> is -1 or lesser, it is indexed
      from the end of the list, with -1 representing the last list element.
      Be careful when counting with negative indices: they do not start from
      0.  -0 is equivalent to 0, the first list element.
 
 
  load_cache
      Load in the values from another project's CMake cache.
 
        load_cache(pathToCacheFile READ_WITH_PREFIX
                    prefix entry1...)
 
      Read the cache and store the requested entries in variables with their
      name prefixed with the given prefix.  This only reads the values, and
      does not create entries in the local project's cache.
 
        load_cache(pathToCacheFile [EXCLUDE entry1...]
                    [INCLUDE_INTERNALS entry1...])
 
      Load in the values from another cache and store them in the local
      project's cache as internal entries.  This is useful for a project
      that depends on another project built in a different tree.  EXCLUDE
      option can be used to provide a list of entries to be excluded.
      INCLUDE_INTERNALS can be used to provide a list of internal entries to
      be included.  Normally, no internal entries are brought in.  Use of
      this form of the command is strongly discouraged, but it is provided
      for backward compatibility.
 
  load_command
      Load a command into a running CMake.
 
        load_command(COMMAND_NAME <loc1> [loc2 ...])
 
      The given locations are searched for a library whose name is
      cmCOMMAND_NAME.  If found, it is loaded as a module and the command is
      added to the set of available CMake commands.  Usually, TRY_COMPILE is
      used before this command to compile the module.  If the command is
      successfully loaded a variable named
 
        CMAKE_LOADED_COMMAND_<COMMAND_NAME>
 
      will be set to the full path of the module that was loaded.  Otherwise
      the variable will not be set.
 
  macro
      Start recording a macro for later invocation as a command.
 
        macro(<name> [arg1 [arg2 [arg3 ...]]])
          COMMAND1(ARGS ...)
          COMMAND2(ARGS ...)
          ...
        endmacro(<name>)
 
      Define a macro named <name> that takes arguments named arg1 arg2 arg3
      (...).  Commands listed after macro, but before the matching endmacro,
      are not invoked until the macro is invoked.  When it is invoked, the
      commands recorded in the macro are first modified by replacing formal
      parameters (${arg1}) with the arguments passed, and then invoked as
      normal commands.  In addition to referencing the formal parameters you
      can reference the values ${ARGC} which will be set to the number of
      arguments passed into the function as well as ${ARGV0} ${ARGV1}
      ${ARGV2} ...  which will have the actual values of the arguments
      passed in.  This facilitates creating macros with optional arguments.
      Additionally ${ARGV} holds the list of all arguments given to the
      macro and ${ARGN} holds the list of argument past the last expected
      argument.  Note that the parameters to a macro and values such as ARGN
      are not variables in the usual CMake sense.  They are string
      replacements much like the c preprocessor would do with a macro.  If
      you want true CMake variables you should look at the function command.
 
      See the cmake_policy() command documentation for the behavior of
      policies inside macros.
 
  mark_as_advanced
      Mark cmake cached variables as advanced.
 
        mark_as_advanced([CLEAR|FORCE] VAR VAR2 VAR...)
 
      Mark the named cached variables as advanced.  An advanced variable
      will not be displayed in any of the cmake GUIs unless the show
      advanced option is on.  If CLEAR is the first argument advanced
      variables are changed back to unadvanced.  If FORCE is the first
      argument, then the variable is made advanced.  If neither FORCE nor
      CLEAR is specified, new values will be marked as advanced, but if the
      variable already has an advanced/non-advanced state, it will not be
      changed.
 
      It does nothing in script mode.
 
  math
      Mathematical expressions.
 
        math(EXPR <output variable> <math expression>)
 
      EXPR evaluates mathematical expression and return result in the output
      variable.  Example mathematical expression is '5 * ( 10 + 13 )'.
      Supported operators are + - * / % | & ^ ~ << >> * / %.  They have the
      same meaning as they do in c code.
 
  message
      Display a message to the user.
 
        message([STATUS|WARNING|AUTHOR_WARNING|FATAL_ERROR|SEND_ERROR]
                "message to display" ...)
 
      The optional keyword determines the type of message:
 
        (none)        = Important information
        STATUS        = Incidental information
        WARNING        = CMake Warning, continue processing
        AUTHOR_WARNING = CMake Warning (dev), continue processing
        SEND_ERROR    = CMake Error, continue but skip generation
        FATAL_ERROR    = CMake Error, stop all processing
 
      The CMake command-line tool displays STATUS messages on stdout and all
      other message types on stderr.  The CMake GUI displays all messages in
      its log area.  The interactive dialogs (ccmake and CMakeSetup) show
      STATUS messages one at a time on a status line and other messages in
      interactive pop-up boxes.
 
      CMake Warning and Error message text displays using a simple markup
      language.  Non-indented text is formatted in line-wrapped paragraphs
      delimited by newlines.  Indented text is considered pre-formatted.
 
  option
      Provides an option that the user can optionally select.
 
        option(<option_variable> "help string describing option"
                [initial value])
 
      Provide an option for the user to select as ON or OFF.  If no initial
      value is provided, OFF is used.
 
  output_required_files
      Output a list of required source files for a specified source file.
 
        output_required_files(srcfile outputfile)
 
      Outputs a list of all the source files that are required by the
      specified srcfile.  This list is written into outputfile.  This is
      similar to writing out the dependencies for srcfile except that it
      jumps from .h files into .cxx, .c and .cpp files if possible.
 
  project
      Set a name for the entire project.
 
        project(<projectname> [languageName1 languageName2 ... ] )
 
      Sets the name of the project.  Additionally this sets the variables
      <projectName>_BINARY_DIR and <projectName>_SOURCE_DIR to the
      respective values.
 
      Optionally you can specify which languages your project supports.
      Example languages are CXX (i.e.  C++), C, Fortran, etc.  By default C
      and CXX are enabled.  E.g.  if you do not have a C++ compiler, you can
      disable the check for it by explicitely listing the languages you want
      to support, e.g.  C.  By using the special language "NONE" all checks
      for any language can be disabled.
 
  qt_wrap_cpp
      Create Qt Wrappers.
 
        qt_wrap_cpp(resultingLibraryName DestName
                    SourceLists ...)
 
      Produce moc files for all the .h files listed in the SourceLists.  The
      moc files will be added to the library using the DestName source list.
 
  qt_wrap_ui
      Create Qt user interfaces Wrappers.
 
        qt_wrap_ui(resultingLibraryName HeadersDestName
                    SourcesDestName SourceLists ...)
 
      Produce .h and .cxx files for all the .ui files listed in the
      SourceLists.  The .h files will be added to the library using the
      HeadersDestNamesource list.  The .cxx files will be added to the
      library using the SourcesDestNamesource list.
 
  remove_definitions
      Removes -D define flags added by add_definitions.
 
        remove_definitions(-DFOO -DBAR ...)
 
      Removes flags (added by add_definitions) from the compiler command
      line for sources in the current directory and below.
 
  return
      Return from a file, directory or function.
 
        return()
 
      Returns from a file, directory or function.  When this command is
      encountered in an included file (via include() or find_package()), it
      causes processing of the current file to stop and control is returned
      to the including file.  If it is encountered in a file which is not
      included by another file, e.g.  a CMakeLists.txt, control is returned
      to the parent directory if there is one.  If return is called in a
      function, control is returned to the caller of the function.  Note
      that a macro is not a function and does not handle return like a
      function does.
 
  separate_arguments
      Parse space-separated arguments into a semicolon-separated list.
 
        separate_arguments(<var> <UNIX|WINDOWS>_COMMAND "<args>")
 
      Parses a unix- or windows-style command-line string "<args>" and
      stores a semicolon-separated list of the arguments in <var>.  The
      entire command line must be given in one "<args>" argument.
 
      The UNIX_COMMAND mode separates arguments by unquoted whitespace.  It
      recognizes both single-quote and double-quote pairs.  A backslash
      escapes the next literal character (\" is "); there are no special
      escapes (\n is just n).
 
      The WINDOWS_COMMAND mode parses a windows command-line using the same
      syntax the runtime library uses to construct argv at startup.  It
      separates arguments by whitespace that is not double-quoted.
      Backslashes are literal unless they precede double-quotes.  See the
      MSDN article "Parsing C Command-Line Arguments" for details.
 
        separate_arguments(VARIABLE)
 
      Convert the value of VARIABLE to a semi-colon separated list.  All
      spaces are replaced with ';'.  This helps with generating command
      lines.
 
  set
      Set a CMAKE variable to a given value.
 
        set(<variable> <value>
            [[CACHE <type> <docstring> [FORCE]] | PARENT_SCOPE])
 
      Within CMake sets <variable> to the value <value>.  <value> is
      expanded before <variable> is set to it.  If CACHE is present, then
      the <variable> is put in the cache.  <type> and <docstring> are then
      required.  <type> is used by the CMake GUI to choose a widget with
      which the user sets a value.  The value for <type> may be one of
 
        FILEPATH = File chooser dialog.
        PATH    = Directory chooser dialog.
        STRING  = Arbitrary string.
        BOOL    = Boolean ON/OFF checkbox.
        INTERNAL = No GUI entry (used for persistent variables).
 
      If <type> is INTERNAL, then the <value> is always written into the
      cache, replacing any values existing in the cache.  If it is not a
      cache variable, then this always writes into the current makefile.
      The FORCE option will overwrite the cache value removing any changes
      by the user.
 
      If PARENT_SCOPE is present, the variable will be set in the scope
      above the current scope.  Each new directory or function creates a new
      scope.  This command will set the value of a variable into the parent
      directory or calling function (whichever is applicable to the case at
      hand).
 
      If <value> is not specified then the variable is removed instead of
      set.  See also: the unset() command.
 
        set(<variable> <value1> ... <valueN>)
 
      In this case <variable> is set to a semicolon separated list of
      values.
 
      <variable> can be an environment variable such as:
 
        set( ENV{PATH} /home/martink )
 
      in which case the environment variable will be set.
 
  set_directory_properties
      Set a property of the directory.
 
        set_directory_properties(PROPERTIES prop1 value1 prop2 value2)
 
      Set a property for the current directory and subdirectories.  If the
      property is not found, CMake will report an error.  The properties
      include: INCLUDE_DIRECTORIES, LINK_DIRECTORIES,
      INCLUDE_REGULAR_EXPRESSION, and ADDITIONAL_MAKE_CLEAN_FILES.
      ADDITIONAL_MAKE_CLEAN_FILES is a list of files that will be cleaned as
      a part of "make clean" stage.
 
  set_property
      Set a named property in a given scope.
 
        set_property(<GLOBAL                            |
                      DIRECTORY [dir]                  |
                      TARGET    [target1 [target2 ...]] |
                      SOURCE    [src1 [src2 ...]]      |
                      TEST      [test1 [test2 ...]]    |
                      CACHE    [entry1 [entry2 ...]]>
                      [APPEND]
                      PROPERTY <name> [value1 [value2 ...]])
 
      Set one property on zero or more objects of a scope.  The first
      argument determines the scope in which the property is set.  It must
      be one of the following:
 
      GLOBAL scope is unique and does not accept a name.
 
      DIRECTORY scope defaults to the current directory but another
      directory (already processed by CMake) may be named by full or
      relative path.
 
      TARGET scope may name zero or more existing targets.
 
      SOURCE scope may name zero or more source files.  Note that source
      file properties are visible only to targets added in the same
      directory (CMakeLists.txt).
 
      TEST scope may name zero or more existing tests.
 
      CACHE scope must name zero or more cache existing entries.
 
      The required PROPERTY option is immediately followed by the name of
      the property to set.  Remaining arguments are used to compose the
      property value in the form of a semicolon-separated list.  If the
      APPEND option is given the list is appended to any existing property
      value.
 
  set_source_files_properties
      Source files can have properties that affect how they are built.
 
        set_source_files_properties([file1 [file2 [...]]]
                                    PROPERTIES prop1 value1
                                    [prop2 value2 [...]])
 
      Set properties associated with source files using a key/value paired
      list.  See properties documentation for those known to CMake.
      Unrecognized properties are ignored.  Source file properties are
      visible only to targets added in the same directory (CMakeLists.txt).
 
  set_target_properties
      Targets can have properties that affect how they are built.
 
        set_target_properties(target1 target2 ...
                              PROPERTIES prop1 value1
                              prop2 value2 ...)
 
      Set properties on a target.  The syntax for the command is to list all
      the files you want to change, and then provide the values you want to
      set next.  You can use any prop value pair you want and extract it
      later with the GET_TARGET_PROPERTY command.
 
      Properties that affect the name of a target's output file are as
      follows.  The PREFIX and SUFFIX properties override the default target
      name prefix (such as "lib") and suffix (such as ".so").  IMPORT_PREFIX
      and IMPORT_SUFFIX are the equivalent properties for the import library
      corresponding to a DLL (for SHARED library targets).  OUTPUT_NAME sets
      the real name of a target when it is built and can be used to help
      create two targets of the same name even though CMake requires unique
      logical target names.  There is also a <CONFIG>_OUTPUT_NAME that can
      set the output name on a per-configuration basis.  <CONFIG>_POSTFIX
      sets a postfix for the real name of the target when it is built under
      the configuration named by <CONFIG> (in upper-case, such as
      "DEBUG_POSTFIX").  The value of this property is initialized when the
      target is created to the value of the variable CMAKE_<CONFIG>_POSTFIX
      (except for executable targets because earlier CMake versions which
      did not use this variable for executables).
 
      The LINK_FLAGS property can be used to add extra flags to the link
      step of a target.  LINK_FLAGS_<CONFIG> will add to the configuration
      <CONFIG>, for example, DEBUG, RELEASE, MINSIZEREL, RELWITHDEBINFO.
      DEFINE_SYMBOL sets the name of the preprocessor symbol defined when
      compiling sources in a shared library.  If not set here then it is set
      to target_EXPORTS by default (with some substitutions if the target is
      not a valid C identifier).  This is useful for headers to know whether
      they are being included from inside their library our outside to
      properly setup dllexport/dllimport decorations.  The COMPILE_FLAGS
      property sets additional compiler flags used to build sources within
      the target.  It may also be used to pass additional preprocessor
      definitions.
 
      The LINKER_LANGUAGE property is used to change the tool used to link
      an executable or shared library.  The default is set the language to
      match the files in the library.  CXX and C are common values for this
      property.
 
      For shared libraries VERSION and SOVERSION can be used to specify the
      build version and api version respectively.  When building or
      installing appropriate symlinks are created if the platform supports
      symlinks and the linker supports so-names.  If only one of both is
      specified the missing is assumed to have the same version number.  For
      executables VERSION can be used to specify the build version.  When
      building or installing appropriate symlinks are created if the
      platform supports symlinks.  For shared libraries and executables on
      Windows the VERSION attribute is parsed to extract a "major.minor"
      version number.  These numbers are used as the image version of the
      binary.
 
      There are a few properties used to specify RPATH rules.  INSTALL_RPATH
      is a semicolon-separated list specifying the rpath to use in installed
      targets (for platforms that support it).  INSTALL_RPATH_USE_LINK_PATH
      is a boolean that if set to true will append directories in the linker
      search path and outside the project to the INSTALL_RPATH.
      SKIP_BUILD_RPATH is a boolean specifying whether to skip automatic
      generation of an rpath allowing the target to run from the build tree.
      BUILD_WITH_INSTALL_RPATH is a boolean specifying whether to link the
      target in the build tree with the INSTALL_RPATH.  This takes
      precedence over SKIP_BUILD_RPATH and avoids the need for relinking
      before installation.  INSTALL_NAME_DIR is a string specifying the
      directory portion of the "install_name" field of shared libraries on
      Mac OSX to use in the installed targets.  When the target is created
      the values of the variables CMAKE_INSTALL_RPATH,
      CMAKE_INSTALL_RPATH_USE_LINK_PATH, CMAKE_SKIP_BUILD_RPATH,
      CMAKE_BUILD_WITH_INSTALL_RPATH, and CMAKE_INSTALL_NAME_DIR are used to
      initialize these properties.
 
      PROJECT_LABEL can be used to change the name of the target in an IDE
      like visual studio.  VS_KEYWORD can be set to change the visual studio
      keyword, for example QT integration works better if this is set to
      Qt4VSv1.0.
 
      VS_SCC_PROJECTNAME, VS_SCC_LOCALPATH, VS_SCC_PROVIDER can be set to
      add support for source control bindings in a Visual Studio project
      file.
 
      The PRE_INSTALL_SCRIPT and POST_INSTALL_SCRIPT properties are the old
      way to specify CMake scripts to run before and after installing a
      target.  They are used only when the old INSTALL_TARGETS command is
      used to install the target.  Use the INSTALL command instead.
 
      The EXCLUDE_FROM_DEFAULT_BUILD property is used by the visual studio
      generators.  If it is set to 1 the target will not be part of the
      default build when you select "Build Solution".
 
  set_tests_properties
      Set a property of the tests.
 
        set_tests_properties(test1 [test2...] PROPERTIES prop1 value1 prop2 value2)
 
      Set a property for the tests.  If the property is not found, CMake
      will report an error.  The properties include:
 
      WILL_FAIL: If set to true, this will invert the pass/fail flag of the
      test.
 
      PASS_REGULAR_EXPRESSION: If set, the test output will be checked
      against the specified regular expressions and at least one of the
      regular expressions has to match, otherwise the test will fail.
 
        Example: PASS_REGULAR_EXPRESSION "TestPassed;All ok"
 
      FAIL_REGULAR_EXPRESSION: If set, if the output will match to one of
      specified regular expressions, the test will fail.
 
        Example: PASS_REGULAR_EXPRESSION "[^a-z]Error;ERROR;Failed"
 
      Both PASS_REGULAR_EXPRESSION and FAIL_REGULAR_EXPRESSION expect a list
      of regular expressions.
 
      TIMEOUT: Setting this will limit the test runtime to the number of
      seconds specified.
 
 
  site_name
      Set the given variable to the name of the computer.
 
        site_name(variable)
 
 
  source_group
      Define a grouping for sources in the makefile.
 
        source_group(name [REGULAR_EXPRESSION regex] [FILES src1 src2 ...])
 
      Defines a group into which sources will be placed in project files.
      This is mainly used to setup file tabs in Visual Studio.  Any file
      whose name is listed or matches the regular expression will be placed
      in this group.  If a file matches multiple groups, the LAST group that
      explicitly lists the file will be favored, if any.  If no group
      explicitly lists the file, the LAST group whose regular expression
      matches the file will be favored.
 
      The name of the group may contain backslashes to specify subgroups:
 
        source_group(outer\\inner ...)
 
      For backwards compatibility, this command is also supports the format:
 
        source_group(name regex)
 
  string
      String operations.
 
        string(REGEX MATCH <regular_expression>
                <output variable> <input> [<input>...])
        string(REGEX MATCHALL <regular_expression>
                <output variable> <input> [<input>...])
        string(REGEX REPLACE <regular_expression>
                <replace_expression> <output variable>
                <input> [<input>...])
        string(REPLACE <match_string>
                <replace_string> <output variable>
                <input> [<input>...])
        string(COMPARE EQUAL <string1> <string2> <output variable>)
        string(COMPARE NOTEQUAL <string1> <string2> <output variable>)
        string(COMPARE LESS <string1> <string2> <output variable>)
        string(COMPARE GREATER <string1> <string2> <output variable>)
        string(ASCII <number> [<number> ...] <output variable>)
        string(CONFIGURE <string1> <output variable>
                [@ONLY] [ESCAPE_QUOTES])
        string(TOUPPER <string1> <output variable>)
        string(TOLOWER <string1> <output variable>)
        string(LENGTH <string> <output variable>)
        string(SUBSTRING <string> <begin> <length> <output variable>)
        string(STRIP <string> <output variable>)
        string(RANDOM [LENGTH <length>] [ALPHABET <alphabet>]
                [RANDOM_SEED <seed>] <output variable>)
 
      REGEX MATCH will match the regular expression once and store the match
      in the output variable.
 
      REGEX MATCHALL will match the regular expression as many times as
      possible and store the matches in the output variable as a list.
 
      REGEX REPLACE will match the regular expression as many times as
      possible and substitute the replacement expression for the match in
      the output.  The replace expression may refer to paren-delimited
      subexpressions of the match using \1, \2, ..., \9.  Note that two
      backslashes (\\1) are required in CMake code to get a backslash
      through argument parsing.
 
      REPLACE will replace all occurrences of match_string in the input with
      replace_string and store the result in the output.
 
      COMPARE EQUAL/NOTEQUAL/LESS/GREATER will compare the strings and store
      true or false in the output variable.
 
      ASCII will convert all numbers into corresponding ASCII characters.
 
      CONFIGURE will transform a string like CONFIGURE_FILE transforms a
      file.
 
      TOUPPER/TOLOWER will convert string to upper/lower characters.
 
      LENGTH will return a given string's length.
 
      SUBSTRING will return a substring of a given string.
 
      STRIP will return a substring of a given string with leading and
      trailing spaces removed.
 
      RANDOM will return a random string of given length consisting of
      characters from the given alphabet.  Default length is 5 characters
      and default alphabet is all numbers and upper and lower case letters.
      If an integer RANDOM_SEED is given, its value will be used to seed the
      random number generator.
 
      The following characters have special meaning in regular expressions:
 
          ^        Matches at beginning of a line
          $        Matches at end of a line
          .        Matches any single character
          [ ]      Matches any character(s) inside the brackets
          [^ ]      Matches any character(s) not inside the brackets
          -        Matches any character in range on either side of a dash
          *        Matches preceding pattern zero or more times
          +        Matches preceding pattern one or more times
          ?        Matches preceding pattern zero or once only
          |        Matches a pattern on either side of the |
          ()        Saves a matched subexpression, which can be referenced
                    in the REGEX REPLACE operation. Additionally it is saved
                    by all regular expression-related commands, including
                    e.g. if( MATCHES ), in the variables CMAKE_MATCH_(0..9).
 
  target_link_libraries
      Link a target to given libraries.
 
        target_link_libraries(<target> [item1 [item2 [...]]]
                              [[debug|optimized|general] <item>] ...)
 
      Specify libraries or flags to use when linking a given target.  If a
      library name matches that of another target in the project a
      dependency will automatically be added in the build system to make
      sure the library being linked is up-to-date before the target links.
      Item names starting with '-', but not '-l' or '-framework', are
      treated as linker flags.
 
      A "debug", "optimized", or "general" keyword indicates that the
      library immediately following it is to be used only for the
      corresponding build configuration.  The "debug" keyword corresponds to
      the Debug configuration (or to configurations named in the
      DEBUG_CONFIGURATIONS global property if it is set).  The "optimized"
      keyword corresponds to all other configurations.  The "general"
      keyword corresponds to all configurations, and is purely optional
      (assumed if omitted).  Higher granularity may be achieved for
      per-configuration rules by creating and linking to IMPORTED library
      targets.  See the IMPORTED mode of the add_library command for more
      information.
 
      Library dependencies are transitive by default.  When this target is
      linked into another target then the libraries linked to this target
      will appear on the link line for the other target too.  See the
      LINK_INTERFACE_LIBRARIES target property to override the set of
      transitive link dependencies for a target.
 
        target_link_libraries(<target> LINK_INTERFACE_LIBRARIES
                              [[debug|optimized|general] <lib>] ...)
 
      The LINK_INTERFACE_LIBRARIES mode appends the libraries to the
      LINK_INTERFACE_LIBRARIES and its per-configuration equivalent target
      properties instead of using them for linking.  Libraries specified as
      "debug" are appended to the the LINK_INTERFACE_LIBRARIES_DEBUG
      property (or to the properties corresponding to configurations listed
      in the DEBUG_CONFIGURATIONS global property if it is set).  Libraries
      specified as "optimized" are appended to the the
      LINK_INTERFACE_LIBRARIES property.  Libraries specified as "general"
      (or without any keyword) are treated as if specified for both "debug"
      and "optimized".
 
      The library dependency graph is normally acyclic (a DAG), but in the
      case of mutually-dependent STATIC libraries CMake allows the graph to
      contain cycles (strongly connected components).  When another target
      links to one of the libraries CMake repeats the entire connected
      component.  For example, the code
 
        add_library(A STATIC a.c)
        add_library(B STATIC b.c)
        target_link_libraries(A B)
        target_link_libraries(B A)
        add_executable(main main.c)
        target_link_libraries(main A)
 
      links 'main' to 'A B A B'.  (While one repetition is usually
      sufficient, pathological object file and symbol arrangements can
      require more.  One may handle such cases by manually repeating the
      component in the last target_link_libraries call.  However, if two
      archives are really so interdependent they should probably be combined
      into a single archive.)
 
  try_compile
      Try compiling some code.
 
        try_compile(RESULT_VAR bindir srcdir
                    projectName <targetname> [CMAKE_FLAGS <Flags>]
                    [OUTPUT_VARIABLE var])
 
      Try compiling a program.  In this form, srcdir should contain a
      complete CMake project with a CMakeLists.txt file and all sources.
      The bindir and srcdir will not be deleted after this command is run.
      If <target name> is specified then build just that target otherwise
      the all or ALL_BUILD target is built.
 
        try_compile(RESULT_VAR bindir srcfile
                    [CMAKE_FLAGS <Flags>]
                    [COMPILE_DEFINITIONS <flags> ...]
                    [OUTPUT_VARIABLE var]
                    [COPY_FILE <filename> )
 
      Try compiling a srcfile.  In this case, the user need only supply a
      source file.  CMake will create the appropriate CMakeLists.txt file to
      build the source.  If COPY_FILE is used, the compiled file will be
      copied to the given file.
 
      In this version all files in bindir/CMakeFiles/CMakeTmp, will be
      cleaned automatically, for debugging a --debug-trycompile can be
      passed to cmake to avoid the clean.  Some extra flags that can be
      included are, INCLUDE_DIRECTORIES, LINK_DIRECTORIES, and
      LINK_LIBRARIES.  COMPILE_DEFINITIONS are -Ddefinition that will be
      passed to the compile line.  try_compile creates a CMakeList.txt file
      on the fly that looks like this:
 
        add_definitions( <expanded COMPILE_DEFINITIONS from calling cmake>)
        include_directories(${INCLUDE_DIRECTORIES})
        link_directories(${LINK_DIRECTORIES})
        add_executable(cmTryCompileExec sources)
        target_link_libraries(cmTryCompileExec ${LINK_LIBRARIES})
 
      In both versions of the command, if OUTPUT_VARIABLE is specified, then
      the output from the build process is stored in the given variable.
      Return the success or failure in RESULT_VAR.  CMAKE_FLAGS can be used
      to pass -DVAR:TYPE=VALUE flags to the cmake that is run during the
      build.
 
  try_run
      Try compiling and then running some code.
 
        try_run(RUN_RESULT_VAR COMPILE_RESULT_VAR
                bindir srcfile [CMAKE_FLAGS <Flags>]
                [COMPILE_DEFINITIONS <flags>]
                [COMPILE_OUTPUT_VARIABLE comp]
                [RUN_OUTPUT_VARIABLE run]
                [OUTPUT_VARIABLE var]
                [ARGS <arg1> <arg2>...])
 
      Try compiling a srcfile.  Return TRUE or FALSE for success or failure
      in COMPILE_RESULT_VAR.  Then if the compile succeeded, run the
      executable and return its exit code in RUN_RESULT_VAR.  If the
      executable was built, but failed to run, then RUN_RESULT_VAR will be
      set to FAILED_TO_RUN.  COMPILE_OUTPUT_VARIABLE specifies the variable
      where the output from the compile step goes.  RUN_OUTPUT_VARIABLE
      specifies the variable where the output from the running executable
      goes.
 
      For compatibility reasons OUTPUT_VARIABLE is still supported, which
      gives you the output from the compile and run step combined.
 
      Cross compiling issues
 
      When cross compiling, the executable compiled in the first step
      usually cannot be run on the build host.  try_run() checks the
      CMAKE_CROSSCOMPILING variable to detect whether CMake is in
      crosscompiling mode.  If that's the case, it will still try to compile
      the executable, but it will not try to run the executable.  Instead it
      will create cache variables which must be filled by the user or by
      presetting them in some CMake script file to the values the executable
      would have produced if it would have been run on its actual target
      platform.  These variables are RUN_RESULT_VAR (explanation see above)
      and if RUN_OUTPUT_VARIABLE (or OUTPUT_VARIABLE) was used, an
      additional cache variable
      RUN_RESULT_VAR__COMPILE_RESULT_VAR__TRYRUN_OUTPUT.This is intended to
      hold stdout and stderr from the executable.
 
      In order to make cross compiling your project easier, use try_run only
      if really required.  If you use try_run, use RUN_OUTPUT_VARIABLE (or
      OUTPUT_VARIABLE) only if really required.  Using them will require
      that when crosscompiling, the cache variables will have to be set
      manually to the output of the executable.  You can also "guard" the
      calls to try_run with if(CMAKE_CROSSCOMPILING) and provide an
      easy-to-preset alternative for this case.
 
 
  unset
      Unset a variable, cache variable, or environment variable.
 
        unset(<variable> [CACHE])
 
      Removes the specified variable causing it to become undefined.  If
      CACHE is present then the variable is removed from the cache instead
      of the current scope.
 
      <variable> can be an environment variable such as:
 
        unset(ENV{LD_LIBRARY_PATH})
 
      in which case the variable will be removed from the current
      environment.
 
  variable_watch
      Watch the CMake variable for change.
 
        variable_watch(<variable name> [<command to execute>])
 
      If the specified variable changes, the message will be printed about
      the variable being changed.  If the command is specified, the command
      will be executed.  The command will receive the following arguments:
      COMMAND(<variable> <access> <value> <current list file> <stack>)
 
  while
      Evaluate a group of commands while a condition is true
 
        while(condition)
          COMMAND1(ARGS ...)
          COMMAND2(ARGS ...)
          ...
        endwhile(condition)
 
      All commands between while and the matching endwhile are recorded
      without being invoked.  Once the endwhile is evaluated, the recorded
      list of commands is invoked as long as the condition is true.  The
      condition is evaluated using the same logic as the if command.
 
------------------------------------------------------------------------------
Properties
 
  CMake Properties - Properties supported by CMake, the Cross-Platform Makefile Generator.
 
This is the documentation for the properties supported by CMake.  Properties
can have different scopes.  They can either be assigned to a source file, a
directory, a target or globally to CMake.  By modifying the values of
properties the behaviour of the build system can be customized.
 
------------------------------------------------------------------------------
Properties of Global Scope
 
  ALLOW_DUPLICATE_CUSTOM_TARGETS
      Allow duplicate custom targets to be created.
 
      Normally CMake requires that all targets built in a project have
      globally unique logical names (see policy CMP0002).  This is necessary
      to generate meaningful project file names in Xcode and VS IDE
      generators.  It also allows the target names to be referenced
      unambiguously.
 
      Makefile generators are capable of supporting duplicate custom target
      names.  For projects that care only about Makefile generators and do
      not wish to support Xcode or VS IDE generators, one may set this
      property to true to allow duplicate custom targets.  The property
      allows multiple add_custom_target command calls in different
      directories to specify the same target name.  However, setting this
      property will cause non-Makefile generators to produce an error and
      refuse to generate the project.
 
  DEBUG_CONFIGURATIONS
      Specify which configurations are for debugging.
 
      The value must be a semi-colon separated list of configuration names.
      Currently this property is used only by the target_link_libraries
      command (see its documentation for details).  Additional uses may be
      defined in the future.
 
      This property must be set at the top level of the project and before
      the first target_link_libraries command invocation.  If any entry in
      the list does not match a valid configuration for the project the
      behavior is undefined.
 
  DISABLED_FEATURES
      List of features which are disabled during the CMake run.
 
      List of features which are disabled during the CMake run.  Be default
      it contains the names of all packages which were not found.  This is
      determined using the <NAME>_FOUND variables.  Packages which are
      searched QUIET are not listed.  A project can add its own features to
      this list.This property is used by the macros in FeatureSummary.cmake.
 
  ENABLED_FEATURES
      List of features which are enabled during the CMake run.
 
      List of features which are enabled during the CMake run.  Be default
      it contains the names of all packages which were found.  This is
      determined using the <NAME>_FOUND variables.  Packages which are
      searched QUIET are not listed.  A project can add its own features to
      this list.This property is used by the macros in FeatureSummary.cmake.
 
  ENABLED_LANGUAGES
      Read-only property that contains the list of currently enabled
      languages
 
      Set to list of currently enabled languages.
 
  FIND_LIBRARY_USE_LIB64_PATHS
      Whether FIND_LIBRARY should automatically search lib64 directories.
 
      FIND_LIBRARY_USE_LIB64_PATHS is a boolean specifying whether the
      FIND_LIBRARY command should automatically search the lib64 variant of
      directories called lib in the search path when building 64-bit
      binaries.
 
  FIND_LIBRARY_USE_OPENBSD_VERSIONING
      Whether FIND_LIBRARY should find OpenBSD-style shared libraries.
 
      This property is a boolean specifying whether the FIND_LIBRARY command
      should find shared libraries with OpenBSD-style versioned extension:
      ".so.<major>.<minor>".  The property is set to true on OpenBSD and
      false on other platforms.
 
  GLOBAL_DEPENDS_DEBUG_MODE
      Enable global target dependency graph debug mode.
 
      CMake automatically analyzes the global inter-target dependency graph
      at the beginning of native build system generation.  This property
      causes it to display details of its analysis to stderr.
 
  GLOBAL_DEPENDS_NO_CYCLES
      Disallow global target dependency graph cycles.
 
      CMake automatically analyzes the global inter-target dependency graph
      at the beginning of native build system generation.  It reports an
      error if the dependency graph contains a cycle that does not consist
      of all STATIC library targets.  This property tells CMake to disallow
      all cycles completely, even among static libraries.
 
  IN_TRY_COMPILE
      Read-only property that is true during a try-compile configuration.
 
      True when building a project inside a TRY_COMPILE or TRY_RUN command.
 
  PACKAGES_FOUND
      List of packages which were found during the CMake run.
 
      List of packages which were found during the CMake run.  Whether a
      package has been found is determined using the <NAME>_FOUND variables.
 
  PACKAGES_NOT_FOUND
      List of packages which were not found during the CMake run.
 
      List of packages which were not found during the CMake run.  Whether a
      package has been found is determined using the <NAME>_FOUND variables.
 
  REPORT_UNDEFINED_PROPERTIES
      If set, report any undefined properties to this file.
 
      If this property is set to a filename then when CMake runs it will
      report any properties or variables that were accessed but not defined
      into the filename specified in this property.
 
  RULE_LAUNCH_COMPILE
      Specify a launcher for compile rules.
 
      Makefile generators prefix compiler commands with the given launcher
      command line.  This is intended to allow launchers to intercept build
      problems with high granularity.  Non-Makefile generators currently
      ignore this property.
 
  RULE_LAUNCH_CUSTOM
      Specify a launcher for custom rules.
 
      Makefile generators prefix custom commands with the given launcher
      command line.  This is intended to allow launchers to intercept build
      problems with high granularity.  Non-Makefile generators currently
      ignore this property.
 
  RULE_LAUNCH_LINK
      Specify a launcher for link rules.
 
      Makefile generators prefix link and archive commands with the given
      launcher command line.  This is intended to allow launchers to
      intercept build problems with high granularity.  Non-Makefile
      generators currently ignore this property.
 
  RULE_MESSAGES
      Specify whether to report a message for each make rule.
 
      This property specifies whether Makefile generators should add a
      progress message describing what each build rule does.  If the
      property is not set the default is ON.  Set the property to OFF to
      disable granular messages and report only as each target completes.
      This is intended to allow scripted builds to avoid the build time cost
      of detailed reports.  If a CMAKE_RULE_MESSAGES cache entry exists its
      value initializes the value of this property.  Non-Makefile generators
      currently ignore this property.
 
  TARGET_ARCHIVES_MAY_BE_SHARED_LIBS
      Set if shared libraries may be named like archives.
 
      On AIX shared libraries may be named "lib<name>.a".  This property is
      set to true on such platforms.
 
  TARGET_SUPPORTS_SHARED_LIBS
      Does the target platform support shared libraries.
 
      TARGET_SUPPORTS_SHARED_LIBS is a boolean specifying whether the target
      platform supports shared libraries.  Basically all current general
      general purpose OS do so, the exception are usually embedded systems
      with no or special OSs.
 
  __CMAKE_DELETE_CACHE_CHANGE_VARS_
      Internal property
 
      Used to detect compiler changes, Do not set.
 
------------------------------------------------------------------------------
Properties on Directories
 
  ADDITIONAL_MAKE_CLEAN_FILES
      Additional files to clean during the make clean stage.
 
      A list of files that will be cleaned as a part of the "make clean"
      stage.
 
  CACHE_VARIABLES
      List of cache variables available in the current directory.
 
      This read-only property specifies the list of CMake cache variables
      currently defined.  It is intended for debugging purposes.
 
  CLEAN_NO_CUSTOM
      Should the output of custom commands be left.
 
      If this is true then the outputs of custom commands for this directory
      will not be removed during the "make clean" stage.
 
  COMPILE_DEFINITIONS
      Preprocessor definitions for compiling a directory's sources.
 
      The COMPILE_DEFINITIONS property may be set to a semicolon-separated
      list of preprocessor definitions using the syntax VAR or VAR=value.
      Function-style definitions are not supported.  CMake will
      automatically escape the value correctly for the native build system
      (note that CMake language syntax may require escapes to specify some
      values).  This property may be set on a per-configuration basis using
      the name COMPILE_DEFINITIONS_<CONFIG> where <CONFIG> is an upper-case
      name (ex.  "COMPILE_DEFINITIONS_DEBUG").  This property will be
      initialized in each directory by its value in the directory's parent.
 
      CMake will automatically drop some definitions that are not supported
      by the native build tool.  The VS6 IDE does not support definition
      values with spaces (but NMake does).
 
      Dislaimer: Most native build tools have poor support for escaping
      certain values.  CMake has work-arounds for many cases but some values
      may just not be possible to pass correctly.  If a value does not seem
      to be escaped correctly, do not attempt to work-around the problem by
      adding escape sequences to the value.  Your work-around may break in a
      future version of CMake that has improved escape support.  Instead
      consider defining the macro in a (configured) header file.  Then
      report the limitation.
 
  COMPILE_DEFINITIONS_<CONFIG>
      Per-configuration preprocessor definitions in a directory.
 
      This is the configuration-specific version of COMPILE_DEFINITIONS.
      This property will be initialized in each directory by its value in
      the directory's parent.
 
 
  DEFINITIONS
      For CMake 2.4 compatibility only.  Use COMPILE_DEFINITIONS instead.
 
      This read-only property specifies the list of flags given so far to
      the add_definitions command.  It is intended for debugging purposes.
      Use the COMPILE_DEFINITIONS instead.
 
  EXCLUDE_FROM_ALL
      Exclude the directory from the all target of its parent.
 
      A property on a directory that indicates if its targets are excluded
      from the default build target.  If it is not, then with a Makefile for
      example typing make will cause the targets to be built.  The same
      concept applies to the default build of other generators.
 
  IMPLICIT_DEPENDS_INCLUDE_TRANSFORM
      Specify #include line transforms for dependencies in a directory.
 
      This property specifies rules to transform macro-like #include lines
      during implicit dependency scanning of C and C++ source files.  The
      list of rules must be semicolon-separated with each entry of the form
      "A_MACRO(%)=value-with-%" (the % must be literal).  During dependency
      scanning occurrences of A_MACRO(...) on #include lines will be
      replaced by the value given with the macro argument substituted for
      '%'.  For example, the entry
 
        MYDIR(%)=<mydir/%>
 
      will convert lines of the form
 
        #include MYDIR(myheader.h)
 
      to
 
        #include <mydir/myheader.h>
 
      allowing the dependency to be followed.
 
      This property applies to sources in all targets within a directory.
      The property value is initialized in each directory by its value in
      the directory's parent.
 
  INCLUDE_DIRECTORIES
      List of preprocessor include file search directories.
 
      This read-only property specifies the list of directories given so far
      to the include_directories command.  It is intended for debugging
      purposes.
 
  INCLUDE_REGULAR_EXPRESSION
      Include file scanning regular expression.
 
      This read-only property specifies the regular expression used during
      dependency scanning to match include files that should be followed.
      See the include_regular_expression command.
 
  INTERPROCEDURAL_OPTIMIZATION
      Enable interprocedural optimization for targets in a directory.
 
      If set to true, enables interprocedural optimizations if they are
      known to be supported by the compiler.
 
  INTERPROCEDURAL_OPTIMIZATION_<CONFIG>
      Per-configuration interprocedural optimization for a directory.
 
      This is a per-configuration version of INTERPROCEDURAL_OPTIMIZATION.
      If set, this property overrides the generic property for the named
      configuration.
 
  LINK_DIRECTORIES
      List of linker search directories.
 
      This read-only property specifies the list of directories given so far
      to the link_directories command.  It is intended for debugging
      purposes.
 
  LISTFILE_STACK
      The current stack of listfiles being processed.
 
      This property is mainly useful when trying to debug errors in your
      CMake scripts.  It returns a list of what list files are currently
      being processed, in order.  So if one listfile does an INCLUDE command
      then that is effectively pushing the included listfile onto the stack.
 
  MACROS
      List of macro commands available in the current directory.
 
      This read-only property specifies the list of CMake macros currently
      defined.  It is intended for debugging purposes.  See the macro
      command.
 
  PARENT_DIRECTORY
      Source directory that added current subdirectory.
 
      This read-only property specifies the source directory that added the
      current source directory as a subdirectory of the build.  In the
      top-level directory the value is the empty-string.
 
  RULE_LAUNCH_COMPILE
      Specify a launcher for compile rules.
 
      See the global property of the same name for details.  This overrides
      the global property for a directory.
 
  RULE_LAUNCH_CUSTOM
      Specify a launcher for custom rules.
 
      See the global property of the same name for details.  This overrides
      the global property for a directory.
 
  RULE_LAUNCH_LINK
      Specify a launcher for link rules.
 
      See the global property of the same name for details.  This overrides
      the global property for a directory.
 
  TEST_INCLUDE_FILE
      A cmake file that will be included when ctest is run.
 
      If you specify TEST_INCLUDE_FILE, that file will be included and
      processed when ctest is run on the directory.
 
  VARIABLES
      List of variables defined in the current directory.
 
      This read-only property specifies the list of CMake variables
      currently defined.  It is intended for debugging purposes.
 
------------------------------------------------------------------------------
Properties on Targets
 
  <CONFIG>_OUTPUT_NAME
      Old per-configuration target file base name.
 
      This is a configuration-specific version of OUTPUT_NAME.  Use
      OUTPUT_NAME_<CONFIG> instead.
 
  <CONFIG>_POSTFIX
      Postfix to append to the target file name for configuration <CONFIG>.
 
      When building with configuration <CONFIG> the value of this property
      is appended to the target file name built on disk.  For non-executable
      targets, this property is initialized by the value of the variable
      CMAKE_<CONFIG>_POSTFIX if it is set when a target is created.  This
      property is ignored on the Mac for Frameworks and App Bundles.
 
  ARCHIVE_OUTPUT_DIRECTORY
      Output directory in which to build ARCHIVE target files.
 
      This property specifies the directory into which archive target files
      should be built.  Multi-configuration generators (VS, Xcode) append a
      per-configuration subdirectory to the specified directory.  There are
      three kinds of target files that may be built: archive, library, and
      runtime.  Executables are always treated as runtime targets.  Static
      libraries are always treated as archive targets.  Module libraries are
      always treated as library targets.  For non-DLL platforms shared
      libraries are treated as library targets.  For DLL platforms the DLL
      part of a shared library is treated as a runtime target and the
      corresponding import library is treated as an archive target.  All
      Windows-based systems including Cygwin are DLL platforms.  This
      property is initialized by the value of the variable
      CMAKE_ARCHIVE_OUTPUT_DIRECTORY if it is set when a target is created.
 
  ARCHIVE_OUTPUT_DIRECTORY_<CONFIG>
      Per-configuration output directory for ARCHIVE target files.
 
      This is a per-configuration version of ARCHIVE_OUTPUT_DIRECTORY, but
      multi-configuration generators (VS, Xcode) do NOT append a
      per-configuration subdirectory to the specified directory.  This
      property is initialized by the value of the variable
      CMAKE_ARCHIVE_OUTPUT_DIRECTORY_<CONFIG> if it is set when a target is
      created.
 
  ARCHIVE_OUTPUT_NAME
      Output name for ARCHIVE target files.
 
      This property specifies the base name for archive target files.  It
      overrides OUTPUT_NAME and OUTPUT_NAME_<CONFIG> properties.  There are
      three kinds of target files that may be built: archive, library, and
      runtime.  Executables are always treated as runtime targets.  Static
      libraries are always treated as archive targets.  Module libraries are
      always treated as library targets.  For non-DLL platforms shared
      libraries are treated as library targets.  For DLL platforms the DLL
      part of a shared library is treated as a runtime target and the
      corresponding import library is treated as an archive target.  All
      Windows-based systems including Cygwin are DLL platforms.
 
  ARCHIVE_OUTPUT_NAME_<CONFIG>
      Per-configuration output name for ARCHIVE target files.
 
      This is the configuration-specific version of ARCHIVE_OUTPUT_NAME.
 
  BUILD_WITH_INSTALL_RPATH
      Should build tree targets have install tree rpaths.
 
      BUILD_WITH_INSTALL_RPATH is a boolean specifying whether to link the
      target in the build tree with the INSTALL_RPATH.  This takes
      precedence over SKIP_BUILD_RPATH and avoids the need for relinking
      before installation.  This property is initialized by the value of the
      variable CMAKE_BUILD_WITH_INSTALL_RPATH if it is set when a target is
      created.
 
  COMPILE_DEFINITIONS
      Preprocessor definitions for compiling a target's sources.
 
      The COMPILE_DEFINITIONS property may be set to a semicolon-separated
      list of preprocessor definitions using the syntax VAR or VAR=value.
      Function-style definitions are not supported.  CMake will
      automatically escape the value correctly for the native build system
      (note that CMake language syntax may require escapes to specify some
      values).  This property may be set on a per-configuration basis using
      the name COMPILE_DEFINITIONS_<CONFIG> where <CONFIG> is an upper-case
      name (ex.  "COMPILE_DEFINITIONS_DEBUG").
 
      CMake will automatically drop some definitions that are not supported
      by the native build tool.  The VS6 IDE does not support definition
      values with spaces (but NMake does).
 
      Dislaimer: Most native build tools have poor support for escaping
      certain values.  CMake has work-arounds for many cases but some values
      may just not be possible to pass correctly.  If a value does not seem
      to be escaped correctly, do not attempt to work-around the problem by
      adding escape sequences to the value.  Your work-around may break in a
      future version of CMake that has improved escape support.  Instead
      consider defining the macro in a (configured) header file.  Then
      report the limitation.
 
  COMPILE_DEFINITIONS_<CONFIG>
      Per-configuration preprocessor definitions on a target.
 
      This is the configuration-specific version of COMPILE_DEFINITIONS.
 
  COMPILE_FLAGS
      Additional flags to use when compiling this target's sources.
 
      The COMPILE_FLAGS property sets additional compiler flags used to
      build sources within the target.  Use COMPILE_DEFINITIONS to pass
      additional preprocessor definitions.
 
  DEBUG_POSTFIX
      See target property <CONFIG>_POSTFIX.
 
      This property is a special case of the more-general <CONFIG>_POSTFIX
      property for the DEBUG configuration.
 
  DEFINE_SYMBOL
      Define a symbol when compiling this target's sources.
 
      DEFINE_SYMBOL sets the name of the preprocessor symbol defined when
      compiling sources in a shared library.  If not set here then it is set
      to target_EXPORTS by default (with some substitutions if the target is
      not a valid C identifier).  This is useful for headers to know whether
      they are being included from inside their library our outside to
      properly setup dllexport/dllimport decorations.
 
  ENABLE_EXPORTS
      Specify whether an executable exports symbols for loadable modules.
 
      Normally an executable does not export any symbols because it is the
      final program.  It is possible for an executable to export symbols to
      be used by loadable modules.  When this property is set to true CMake
      will allow other targets to "link" to the executable with the
      TARGET_LINK_LIBRARIES command.  On all platforms a target-level
      dependency on the executable is created for targets that link to it.
      For non-DLL platforms the link rule is simply ignored since the
      dynamic loader will automatically bind symbols when the module is
      loaded.  For DLL platforms an import library will be created for the
      exported symbols and then used for linking.  All Windows-based systems
      including Cygwin are DLL platforms.
 
  EXCLUDE_FROM_ALL
      Exclude the target from the all target.
 
      A property on a target that indicates if the target is excluded from
      the default build target.  If it is not, then with a Makefile for
      example typing make will cause this target to be built.  The same
      concept applies to the default build of other generators.  Installing
      a target with EXCLUDE_FROM_ALL set to true has undefined behavior.
 
  EchoString
      A message to be displayed when the target is built.
 
      A message to display on some generators (such as makefiles) when the
      target is built.
 
  FRAMEWORK
      This target is a framework on the Mac.
 
      If a shared library target has this property set to true it will be
      built as a framework when built on the mac.  It will have the
      directory structure required for a framework and will be suitable to
      be used with the -framework option
 
  Fortran_MODULE_DIRECTORY
      Specify output directory for Fortran modules provided by the target.
 
      If the target contains Fortran source files that provide modules and
      the compiler supports a module output directory this specifies the
      directory in which the modules will be placed.  When this property is
      not set the modules will be placed in the build directory
      corresponding to the target's source directory.  If the variable
      CMAKE_Fortran_MODULE_DIRECTORY is set when a target is created its
      value is used to initialize this property.
 
  GENERATOR_FILE_NAME
      Generator's file for this target.
 
      An internal property used by some generators to record the name of
      project or dsp file associated with this target.
 
  HAS_CXX
      Link the target using the C++ linker tool (obsolete).
 
      This is equivalent to setting the LINKER_LANGUAGE property to CXX.
      See that property's documentation for details.
 
  IMPLICIT_DEPENDS_INCLUDE_TRANSFORM
      Specify #include line transforms for dependencies in a target.
 
      This property specifies rules to transform macro-like #include lines
      during implicit dependency scanning of C and C++ source files.  The
      list of rules must be semicolon-separated with each entry of the form
      "A_MACRO(%)=value-with-%" (the % must be literal).  During dependency
      scanning occurrences of A_MACRO(...) on #include lines will be
      replaced by the value given with the macro argument substituted for
      '%'.  For example, the entry
 
        MYDIR(%)=<mydir/%>
 
      will convert lines of the form
 
        #include MYDIR(myheader.h)
 
      to
 
        #include <mydir/myheader.h>
 
      allowing the dependency to be followed.
 
      This property applies to sources in the target on which it is set.
 
  IMPORTED
      Read-only indication of whether a target is IMPORTED.
 
      The boolean value of this property is true for targets created with
      the IMPORTED option to add_executable or add_library.  It is false for
      targets built within the project.
 
  IMPORTED_CONFIGURATIONS
      Configurations provided for an IMPORTED target.
 
      Lists configuration names available for an IMPORTED target.  The names
      correspond to configurations defined in the project from which the
      target is imported.  If the importing project uses a different set of
      configurations the names may be mapped using the
      MAP_IMPORTED_CONFIG_<CONFIG> property.  Ignored for non-imported
      targets.
 
  IMPORTED_IMPLIB
      Full path to the import library for an IMPORTED target.
 
      Specifies the location of the ".lib" part of a windows DLL.  Ignored
      for non-imported targets.
 
  IMPORTED_IMPLIB_<CONFIG>
      Per-configuration version of IMPORTED_IMPLIB property.
 
      This property is used when loading settings for the <CONFIG>
      configuration of an imported target.  Configuration names correspond
      to those provided by the project from which the target is imported.
 
  IMPORTED_LINK_DEPENDENT_LIBRARIES
      Dependent shared libraries of an imported shared library.
 
      Shared libraries may be linked to other shared libraries as part of
      their implementation.  On some platforms the linker searches for the
      dependent libraries of shared libraries they are including in the
      link.  This property lists the dependent shared libraries of an
      imported library.  The list should be disjoint from the list of
      interface libraries in the IMPORTED_LINK_INTERFACE_LIBRARIES property.
      On platforms requiring dependent shared libraries to be found at link
      time CMake uses this list to add appropriate files or paths to the
      link command line.  Ignored for non-imported targets.
 
  IMPORTED_LINK_DEPENDENT_LIBRARIES_<CONFIG>
      Per-configuration version of IMPORTED_LINK_DEPENDENT_LIBRARIES.
 
      This property is used when loading settings for the <CONFIG>
      configuration of an imported target.  Configuration names correspond
      to those provided by the project from which the target is imported.
      If set, this property completely overrides the generic property for
      the named configuration.
 
  IMPORTED_LINK_INTERFACE_LANGUAGES
      Languages compiled into an IMPORTED static library.
 
      Lists languages of soure files compiled to produce a STATIC IMPORTED
      library (such as "C" or "CXX").  CMake accounts for these languages
      when computing how to link a target to the imported library.  For
      example, when a C executable links to an imported C++ static library
      CMake chooses the C++ linker to satisfy language runtime dependencies
      of the static library.
 
      This property is ignored for targets that are not STATIC libraries.
      This property is ignored for non-imported targets.
 
  IMPORTED_LINK_INTERFACE_LANGUAGES_<CONFIG>
      Per-configuration version of IMPORTED_LINK_INTERFACE_LANGUAGES.
 
      This property is used when loading settings for the <CONFIG>
      configuration of an imported target.  Configuration names correspond
      to those provided by the project from which the target is imported.
      If set, this property completely overrides the generic property for
      the named configuration.
 
  IMPORTED_LINK_INTERFACE_LIBRARIES
      Transitive link interface of an IMPORTED target.
 
      Lists libraries whose interface is included when an IMPORTED library
      target is linked to another target.  The libraries will be included on
      the link line for the target.  Unlike the LINK_INTERFACE_LIBRARIES
      property, this property applies to all imported target types,
      including STATIC libraries.  This property is ignored for non-imported
      targets.
 
  IMPORTED_LINK_INTERFACE_LIBRARIES_<CONFIG>
      Per-configuration version of IMPORTED_LINK_INTERFACE_LIBRARIES.
 
      This property is used when loading settings for the <CONFIG>
      configuration of an imported target.  Configuration names correspond
      to those provided by the project from which the target is imported.
      If set, this property completely overrides the generic property for
      the named configuration.
 
  IMPORTED_LINK_INTERFACE_MULTIPLICITY
      Repetition count for cycles of IMPORTED static libraries.
 
      This is LINK_INTERFACE_MULTIPLICITY for IMPORTED targets.
 
  IMPORTED_LINK_INTERFACE_MULTIPLICITY_<CONFIG>
      Per-configuration repetition count for cycles of IMPORTED archives.
 
      This is the configuration-specific version of
      IMPORTED_LINK_INTERFACE_MULTIPLICITY.  If set, this property
      completely overrides the generic property for the named configuration.
 
  IMPORTED_LOCATION
      Full path to the main file on disk for an IMPORTED target.
 
      Specifies the location of an IMPORTED target file on disk.  For
      executables this is the location of the executable file.  For bundles
      on OS X this is the location of the executable file inside
      Contents/MacOS under the application bundle folder.  For static
      libraries and modules this is the location of the library or module.
      For shared libraries on non-DLL platforms this is the location of the
      shared library.  For frameworks on OS X this is the location of the
      library file symlink just inside the framework folder.  For DLLs this
      is the location of the ".dll" part of the library.  For UNKNOWN
      libraries this is the location of the file to be linked.  Ignored for
      non-imported targets.
 
  IMPORTED_LOCATION_<CONFIG>
      Per-configuration version of IMPORTED_LOCATION property.
 
      This property is used when loading settings for the <CONFIG>
      configuration of an imported target.  Configuration names correspond
      to those provided by the project from which the target is imported.
 
  IMPORTED_SONAME
      The "soname" of an IMPORTED target of shared library type.
 
      Specifies the "soname" embedded in an imported shared library.  This
      is meaningful only on platforms supporting the feature.  Ignored for
      non-imported targets.
 
  IMPORTED_SONAME_<CONFIG>
      Per-configuration version of IMPORTED_SONAME property.
 
      This property is used when loading settings for the <CONFIG>
      configuration of an imported target.  Configuration names correspond
      to those provided by the project from which the target is imported.
 
  IMPORT_PREFIX
      What comes before the import library name.
 
      Similar to the target property PREFIX, but used for import libraries
      (typically corresponding to a DLL) instead of regular libraries.  A
      target property that can be set to override the prefix (such as "lib")
      on an import library name.
 
  IMPORT_SUFFIX
      What comes after the import library name.
 
      Similar to the target property SUFFIX, but used for import libraries
      (typically corresponding to a DLL) instead of regular libraries.  A
      target property that can be set to override the suffix (such as
      ".lib") on an import library name.
 
  INSTALL_NAME_DIR
      Mac OSX directory name for installed targets.
 
      INSTALL_NAME_DIR is a string specifying the directory portion of the
      "install_name" field of shared libraries on Mac OSX to use in the
      installed targets.
 
  INSTALL_RPATH
      The rpath to use for installed targets.
 
      A semicolon-separated list specifying the rpath to use in installed
      targets (for platforms that support it).  This property is initialized
      by the value of the variable CMAKE_INSTALL_RPATH if it is set when a
      target is created.
 
  INSTALL_RPATH_USE_LINK_PATH
      Add paths to linker search and installed rpath.
 
      INSTALL_RPATH_USE_LINK_PATH is a boolean that if set to true will
      append directories in the linker search path and outside the project
      to the INSTALL_RPATH.  This property is initialized by the value of
      the variable CMAKE_INSTALL_RPATH_USE_LINK_PATH if it is set when a
      target is created.
 
  INTERPROCEDURAL_OPTIMIZATION
      Enable interprocedural optimization for a target.
 
      If set to true, enables interprocedural optimizations if they are
      known to be supported by the compiler.
 
  INTERPROCEDURAL_OPTIMIZATION_<CONFIG>
      Per-configuration interprocedural optimization for a target.
 
      This is a per-configuration version of INTERPROCEDURAL_OPTIMIZATION.
      If set, this property overrides the generic property for the named
      configuration.
 
  LABELS
      Specify a list of text labels associated with a target.
 
      Target label semantics are currently unspecified.
 
  LIBRARY_OUTPUT_DIRECTORY
      Output directory in which to build LIBRARY target files.
 
      This property specifies the directory into which library target files
      should be built.  Multi-configuration generators (VS, Xcode) append a
      per-configuration subdirectory to the specified directory.  There are
      three kinds of target files that may be built: archive, library, and
      runtime.  Executables are always treated as runtime targets.  Static
      libraries are always treated as archive targets.  Module libraries are
      always treated as library targets.  For non-DLL platforms shared
      libraries are treated as library targets.  For DLL platforms the DLL
      part of a shared library is treated as a runtime target and the
      corresponding import library is treated as an archive target.  All
      Windows-based systems including Cygwin are DLL platforms.  This
      property is initialized by the value of the variable
      CMAKE_LIBRARY_OUTPUT_DIRECTORY if it is set when a target is created.
 
  LIBRARY_OUTPUT_DIRECTORY_<CONFIG>
      Per-configuration output directory for LIBRARY target files.
 
      This is a per-configuration version of LIBRARY_OUTPUT_DIRECTORY, but
      multi-configuration generators (VS, Xcode) do NOT append a
      per-configuration subdirectory to the specified directory.  This
      property is initialized by the value of the variable
      CMAKE_LIBRARY_OUTPUT_DIRECTORY_<CONFIG> if it is set when a target is
      created.
 
  LIBRARY_OUTPUT_NAME
      Output name for LIBRARY target files.
 
      This property specifies the base name for library target files.  It
      overrides OUTPUT_NAME and OUTPUT_NAME_<CONFIG> properties.  There are
      three kinds of target files that may be built: archive, library, and
      runtime.  Executables are always treated as runtime targets.  Static
      libraries are always treated as archive targets.  Module libraries are
      always treated as library targets.  For non-DLL platforms shared
      libraries are treated as library targets.  For DLL platforms the DLL
      part of a shared library is treated as a runtime target and the
      corresponding import library is treated as an archive target.  All
      Windows-based systems including Cygwin are DLL platforms.
 
  LIBRARY_OUTPUT_NAME_<CONFIG>
      Per-configuration output name for LIBRARY target files.
 
      This is the configuration-specific version of LIBRARY_OUTPUT_NAME.
 
  LINKER_LANGUAGE
      Specifies language whose compiler will invoke the linker.
 
      For executables, shared libraries, and modules, this sets the language
      whose compiler is used to link the target (such as "C" or "CXX").  A
      typical value for an executable is the language of the source file
      providing the program entry point (main).  If not set, the language
      with the highest linker preference value is the default.  See
      documentation of CMAKE_<LANG>_LINKER_PREFERENCE variables.
 
  LINK_FLAGS
      Additional flags to use when linking this target.
 
      The LINK_FLAGS property can be used to add extra flags to the link
      step of a target.  LINK_FLAGS_<CONFIG> will add to the configuration
      <CONFIG>, for example, DEBUG, RELEASE, MINSIZEREL, RELWITHDEBINFO.
 
  LINK_FLAGS_<CONFIG>
      Per-configuration linker flags for a target.
 
      This is the configuration-specific version of LINK_FLAGS.
 
  LINK_INTERFACE_LIBRARIES
      List public interface libraries for a shared library or executable.
 
      By default linking to a shared library target transitively links to
      targets with which the library itself was linked.  For an executable
      with exports (see the ENABLE_EXPORTS property) no default transitive
      link dependencies are used.  This property replaces the default
      transitive link dependencies with an explict list.  When the target is
      linked into another target the libraries listed (and recursively their
      link interface libraries) will be provided to the other target also.
      If the list is empty then no transitive link dependencies will be
      incorporated when this target is linked into another target even if
      the default set is non-empty.  This property is ignored for STATIC
      libraries.
 
  LINK_INTERFACE_LIBRARIES_<CONFIG>
      Per-configuration list of public interface libraries for a target.
 
      This is the configuration-specific version of
      LINK_INTERFACE_LIBRARIES.  If set, this property completely overrides
      the generic property for the named configuration.
 
  LINK_INTERFACE_MULTIPLICITY
      Repetition count for STATIC libraries with cyclic dependencies.
 
      When linking to a STATIC library target with cyclic dependencies the
      linker may need to scan more than once through the archives in the
      strongly connected component of the dependency graph.  CMake by
      default constructs the link line so that the linker will scan through
      the component at least twice.  This property specifies the minimum
      number of scans if it is larger than the default.  CMake uses the
      largest value specified by any target in a component.
 
  LINK_INTERFACE_MULTIPLICITY_<CONFIG>
      Per-configuration repetition count for cycles of STATIC libraries.
 
      This is the configuration-specific version of
      LINK_INTERFACE_MULTIPLICITY.  If set, this property completely
      overrides the generic property for the named configuration.
 
  LINK_SEARCH_END_STATIC
      End a link line such that static system libraries are used.
 
      Some linkers support switches such as -Bstatic and -Bdynamic to
      determine whether to use static or shared libraries for -lXXX options.
      CMake uses these options to set the link type for libraries whose full
      paths are not known or (in some cases) are in implicit link
      directories for the platform.  By default the linker search type is
      left at -Bdynamic by the end of the library list.  This property
      switches the final linker search type to -Bstatic.
 
  LOCATION
      Read-only location of a target on disk.
 
      For an imported target, this read-only property returns the value of
      the LOCATION_<CONFIG> property for an unspecified configuration
      <CONFIG> provided by the target.
 
      For a non-imported target, this property is provided for compatibility
      with CMake 2.4 and below.  It was meant to get the location of an
      executable target's output file for use in add_custom_command.  The
      path may contain a build-system-specific portion that is replaced at
      build time with the configuration getting built (such as
      "$(ConfigurationName)" in VS).  In CMake 2.6 and above
      add_custom_command automatically recognizes a target name in its
      COMMAND and DEPENDS options and computes the target location.
      Therefore this property is not needed for creating custom commands.
 
  LOCATION_<CONFIG>
      Read-only property providing a target location on disk.
 
      A read-only property that indicates where a target's main file is
      located on disk for the configuration <CONFIG>.  The property is
      defined only for library and executable targets.  An imported target
      may provide a set of configurations different from that of the
      importing project.  By default CMake looks for an exact-match but
      otherwise uses an arbitrary available configuration.  Use the
      MAP_IMPORTED_CONFIG_<CONFIG> property to map imported configurations
      explicitly.
 
  MACOSX_BUNDLE
      Build an executable as an application bundle on Mac OS X.
 
      When this property is set to true the executable when built on Mac OS
      X will be created as an application bundle.  This makes it a GUI
      executable that can be launched from the Finder.  See the
      MACOSX_BUNDLE_INFO_PLIST target property for information about
      creation of the Info.plist file for the application bundle.
 
  MACOSX_BUNDLE_INFO_PLIST
      Specify a custom Info.plist template for a Mac OS X App Bundle.
 
      An executable target with MACOSX_BUNDLE enabled will be built as an
      application bundle on Mac OS X.  By default its Info.plist file is
      created by configuring a template called MacOSXBundleInfo.plist.in
      located in the CMAKE_MODULE_PATH.  This property specifies an
      alternative template file name which may be a full path.
 
      The following target properties may be set to specify content to be
      configured into the file:
 
        MACOSX_BUNDLE_INFO_STRING
        MACOSX_BUNDLE_ICON_FILE
        MACOSX_BUNDLE_GUI_IDENTIFIER
        MACOSX_BUNDLE_LONG_VERSION_STRING
        MACOSX_BUNDLE_BUNDLE_NAME
        MACOSX_BUNDLE_SHORT_VERSION_STRING
        MACOSX_BUNDLE_BUNDLE_VERSION
        MACOSX_BUNDLE_COPYRIGHT
 
      CMake variables of the same name may be set to affect all targets in a
      directory that do not have each specific property set.  If a custom
      Info.plist is specified by this property it may of course hard-code
      all the settings instead of using the target properties.
 
  MACOSX_FRAMEWORK_INFO_PLIST
      Specify a custom Info.plist template for a Mac OS X Framework.
 
      An library target with FRAMEWORK enabled will be built as a framework
      on Mac OS X.  By default its Info.plist file is created by configuring
      a template called MacOSXFrameworkInfo.plist.in located in the
      CMAKE_MODULE_PATH.  This property specifies an alternative template
      file name which may be a full path.
 
      The following target properties may be set to specify content to be
      configured into the file:
 
        MACOSX_FRAMEWORK_ICON_FILE
        MACOSX_FRAMEWORK_IDENTIFIER
        MACOSX_FRAMEWORK_SHORT_VERSION_STRING
        MACOSX_FRAMEWORK_BUNDLE_VERSION
 
      CMake variables of the same name may be set to affect all targets in a
      directory that do not have each specific property set.  If a custom
      Info.plist is specified by this property it may of course hard-code
      all the settings instead of using the target properties.
 
  MAP_IMPORTED_CONFIG_<CONFIG>
      Map from project configuration to IMPORTED target's configuration.
 
      List configurations of an imported target that may be used for the
      current project's <CONFIG> configuration.  Targets imported from
      another project may not provide the same set of configuration names
      available in the current project.  Setting this property tells CMake
      what imported configurations are suitable for use when building the
      <CONFIG> configuration.  The first configuration in the list found to
      be provided by the imported target is selected.  If no matching
      configurations are available the imported target is considered to be
      not found.  This property is ignored for non-imported targets.
 
  OSX_ARCHITECTURES
      Target specific architectures for OS X.
 
      The OSX_ARCHITECTURES property sets the target binary architecture for
      targets on OS X.  This property is initialized by the value of the
      variable CMAKE_OSX_ARCHITECTURES if it is set when a target is
      created.  Use OSX_ARCHITECTURES_<CONFIG> to set the binary
      architectures on a per-configuration basis.  <CONFIG> is an upper-case
      name (ex: "OSX_ARCHITECTURES_DEBUG").
 
  OSX_ARCHITECTURES_<CONFIG>
      Per-configuration OS X binary architectures for a target.
 
      This property is the configuration-specific version of
      OSX_ARCHITECTURES.
 
  OUTPUT_NAME
      Output name for target files.
 
      This sets the base name for output files created for an executable or
      library target.  If not set, the logical target name is used by
      default.
 
  OUTPUT_NAME_<CONFIG>
      Per-configuration target file base name.
 
      This is the configuration-specific version of OUTPUT_NAME.
 
  POST_INSTALL_SCRIPT
      Deprecated install support.
 
      The PRE_INSTALL_SCRIPT and POST_INSTALL_SCRIPT properties are the old
      way to specify CMake scripts to run before and after installing a
      target.  They are used only when the old INSTALL_TARGETS command is
      used to install the target.  Use the INSTALL command instead.
 
  PREFIX
      What comes before the library name.
 
      A target property that can be set to override the prefix (such as
      "lib") on a library name.
 
  PRE_INSTALL_SCRIPT
      Deprecated install support.
 
      The PRE_INSTALL_SCRIPT and POST_INSTALL_SCRIPT properties are the old
      way to specify CMake scripts to run before and after installing a
      target.  They are used only when the old INSTALL_TARGETS command is
      used to install the target.  Use the INSTALL command instead.
 
  PRIVATE_HEADER
      Specify private header files in a FRAMEWORK shared library target.
 
      Shared library targets marked with the FRAMEWORK property generate
      frameworks on OS X and normal shared libraries on other platforms.
      This property may be set to a list of header files to be placed in the
      PrivateHeaders directory inside the framework folder.  On non-Apple
      platforms these headers may be installed using the PRIVATE_HEADER
      option to the install(TARGETS) command.
 
  PROJECT_LABEL
      Change the name of a target in an IDE.
 
      Can be used to change the name of the target in an IDE like visual
      stuido.
 
  PUBLIC_HEADER
      Specify public header files in a FRAMEWORK shared library target.
 
      Shared library targets marked with the FRAMEWORK property generate
      frameworks on OS X and normal shared libraries on other platforms.
      This property may be set to a list of header files to be placed in the
      Headers directory inside the framework folder.  On non-Apple platforms
      these headers may be installed using the PUBLIC_HEADER option to the
      install(TARGETS) command.
 
  RESOURCE
      Specify resource files in a FRAMEWORK shared library target.
 
      Shared library targets marked with the FRAMEWORK property generate
      frameworks on OS X and normal shared libraries on other platforms.
      This property may be set to a list of files to be placed in the
      Resources directory inside the framework folder.  On non-Apple
      platforms these files may be installed using the RESOURCE option to
      the install(TARGETS) command.
 
  RULE_LAUNCH_COMPILE
      Specify a launcher for compile rules.
 
      See the global property of the same name for details.  This overrides
      the global and directory property for a target.
 
  RULE_LAUNCH_CUSTOM
      Specify a launcher for custom rules.
 
      See the global property of the same name for details.  This overrides
      the global and directory property for a target.
 
  RULE_LAUNCH_LINK
      Specify a launcher for link rules.
 
      See the global property of the same name for details.  This overrides
      the global and directory property for a target.
 
  RUNTIME_OUTPUT_DIRECTORY
      Output directory in which to build RUNTIME target files.
 
      This property specifies the directory into which runtime target files
      should be built.  Multi-configuration generators (VS, Xcode) append a
      per-configuration subdirectory to the specified directory.  There are
      three kinds of target files that may be built: archive, library, and
      runtime.  Executables are always treated as runtime targets.  Static
      libraries are always treated as archive targets.  Module libraries are
      always treated as library targets.  For non-DLL platforms shared
      libraries are treated as library targets.  For DLL platforms the DLL
      part of a shared library is treated as a runtime target and the
      corresponding import library is treated as an archive target.  All
      Windows-based systems including Cygwin are DLL platforms.  This
      property is initialized by the value of the variable
      CMAKE_RUNTIME_OUTPUT_DIRECTORY if it is set when a target is created.
 
  RUNTIME_OUTPUT_DIRECTORY_<CONFIG>
      Per-configuration output directory for RUNTIME target files.
 
      This is a per-configuration version of RUNTIME_OUTPUT_DIRECTORY, but
      multi-configuration generators (VS, Xcode) do NOT append a
      per-configuration subdirectory to the specified directory.  This
      property is initialized by the value of the variable
      CMAKE_RUNTIME_OUTPUT_DIRECTORY_<CONFIG> if it is set when a target is
      created.
 
  RUNTIME_OUTPUT_NAME
      Output name for RUNTIME target files.
 
      This property specifies the base name for runtime target files.  It
      overrides OUTPUT_NAME and OUTPUT_NAME_<CONFIG> properties.  There are
      three kinds of target files that may be built: archive, library, and
      runtime.  Executables are always treated as runtime targets.  Static
      libraries are always treated as archive targets.  Module libraries are
      always treated as library targets.  For non-DLL platforms shared
      libraries are treated as library targets.  For DLL platforms the DLL
      part of a shared library is treated as a runtime target and the
      corresponding import library is treated as an archive target.  All
      Windows-based systems including Cygwin are DLL platforms.
 
  RUNTIME_OUTPUT_NAME_<CONFIG>
      Per-configuration output name for RUNTIME target files.
 
      This is the configuration-specific version of RUNTIME_OUTPUT_NAME.
 
  SKIP_BUILD_RPATH
      Should rpaths be used for the build tree.
 
      SKIP_BUILD_RPATH is a boolean specifying whether to skip automatic
      generation of an rpath allowing the target to run from the build tree.
      This property is initialized by the value of the variable
      CMAKE_SKIP_BUILD_RPATH if it is set when a target is created.
 
  SOURCES
      Source names specified for a target.
 
      Read-only list of sources specified for a target.  The names returned
      are suitable for passing to the set_source_files_properties command.
 
  SOVERSION
      What version number is this target.
 
      For shared libraries VERSION and SOVERSION can be used to specify the
      build version and api version respectively.  When building or
      installing appropriate symlinks are created if the platform supports
      symlinks and the linker supports so-names.  If only one of both is
      specified the missing is assumed to have the same version number.  For
      shared libraries and executables on Windows the VERSION attribute is
      parsed to extract a "major.minor" version number.  These numbers are
      used as the image version of the binary.
 
  STATIC_LIBRARY_FLAGS
      Extra flags to use when linking static libraries.
 
      Extra flags to use when linking a static library.
 
  STATIC_LIBRARY_FLAGS_<CONFIG>
      Per-configuration flags for creating a static library.
 
      This is the configuration-specific version of STATIC_LIBRARY_FLAGS.
 
  SUFFIX
      What comes after the library name.
 
      A target property that can be set to override the suffix (such as
      ".so") on a library name.
 
  TYPE
      The type of the target.
 
      This read-only property can be used to test the type of the given
      target.  It will be one of STATIC_LIBRARY, MODULE_LIBRARY,
      SHARED_LIBRARY, EXECUTABLE or one of the internal target types.
 
  VERSION
      What version number is this target.
 
      For shared libraries VERSION and SOVERSION can be used to specify the
      build version and api version respectively.  When building or
      installing appropriate symlinks are created if the platform supports
      symlinks and the linker supports so-names.  If only one of both is
      specified the missing is assumed to have the same version number.  For
      executables VERSION can be used to specify the build version.  When
      building or installing appropriate symlinks are created if the
      platform supports symlinks.  For shared libraries and executables on
      Windows the VERSION attribute is parsed to extract a "major.minor"
      version number.  These numbers are used as the image version of the
      binary.
 
  VS_KEYWORD
      Visual Studio project keyword.
 
      Can be set to change the visual studio keyword, for example QT
      integration works better if this is set to Qt4VSv1.0.
 
  VS_SCC_LOCALPATH
      Visual Studio Source Code Control Provider.
 
      Can be set to change the visual studio source code control local path
      property.
 
  VS_SCC_PROJECTNAME
      Visual Studio Source Code Control Project.
 
      Can be set to change the visual studio source code control project
      name property.
 
  VS_SCC_PROVIDER
      Visual Studio Source Code Control Provider.
 
      Can be set to change the visual studio source code control provider
      property.
 
  WIN32_EXECUTABLE
      Build an executable with a WinMain entry point on windows.
 
      When this property is set to true the executable when linked on
      Windows will be created with a WinMain() entry point instead of of
      just main().This makes it a GUI executable instead of a console
      application.  See the CMAKE_MFC_FLAG variable documentation to
      configure use of MFC for WinMain executables.
 
  XCODE_ATTRIBUTE_<an-attribute>
      Set Xcode target attributes directly.
 
      Tell the Xcode generator to set '<an-attribute>' to a given value in
      the generated Xcode project.  Ignored on other generators.
 
------------------------------------------------------------------------------
Properties on Tests
 
  ATTACHED_FILES
      Attach a list of files to a dashboard submission.
 
      Set this property to a list of files that will be encoded and
      submitted to the dashboard as an addition to the test result.
 
  ATTACHED_FILES_ON_FAIL
      Attach a list of files to a dashboard submission if the test fails.
 
      Same as ATTACHED_FILES, but these files will only be included if the
      test does not pass.
 
  COST
      Set this to a floating point value.  Tests in a test set will be run
      in descending order of cost.
 
      This property describes the cost of a test.  You can explicitly set
      this value; tests with higher COST values will run first.
 
  DEPENDS
      Specifies that this test should only be run after the specified list
      of tests.
 
      Set this to a list of tests that must finish before this test is run.
 
  ENVIRONMENT
      Specify environment variables that should be defined for running a
      test.
 
      If set to a list of environment variables and values of the form
      MYVAR=value those environment variables will be defined while running
      the test.  The environment is restored to its previous state after the
      test is done.
 
  FAIL_REGULAR_EXPRESSION
      If the output matches this regular expression the test will fail.
 
      If set, if the output matches one of specified regular expressions,
      the test will fail.For example: PASS_REGULAR_EXPRESSION
      "[^a-z]Error;ERROR;Failed"
 
  LABELS
      Specify a list of text labels associated with a test.
 
      The list is reported in dashboard submissions.
 
  MEASUREMENT
      Specify a CDASH measurement and value to be reported for a test.
 
      If set to a name then that name will be reported to CDASH as a named
      measurement with a value of 1.  You may also specify a value by
      setting MEASUREMENT to "measurement=value".
 
  PASS_REGULAR_EXPRESSION
      The output must match this regular expression for the test to pass.
 
      If set, the test output will be checked against the specified regular
      expressions and at least one of the regular expressions has to match,
      otherwise the test will fail.
 
  PROCESSORS
      How many process slots this test requires
 
      Denotes the number of processors that this test will require.  This is
      typically used for MPI tests, and should be used in conjunction with
      the ctest_test PARALLEL_LEVEL option.
 
  REQUIRED_FILES
      List of files required to run the test.
 
      If set to a list of files, the test will not be run unless all of the
      files exist.
 
  RESOURCE_LOCK
      Specify a list of resources that are locked by this test.
 
      If multiple tests specify the same resource lock, they are guaranteed
      not to run concurrently.
 
  RUN_SERIAL
      Do not run this test in parallel with any other test.
 
      Use this option in conjunction with the ctest_test PARALLEL_LEVEL
      option to specify that this test should not be run in parallel with
      any other tests.
 
  TIMEOUT
      How many seconds to allow for this test.
 
      This property if set will limit a test to not take more than the
      specified number of seconds to run.  If it exceeds that the test
      process will be killed and ctest will move to the next test.  This
      setting takes precedence over CTEST_TESTING_TIMEOUT.
 
  WILL_FAIL
      If set to true, this will invert the pass/fail flag of the test.
 
      This property can be used for tests that are expected to fail and
      return a non zero return code.
 
------------------------------------------------------------------------------
Properties on Source Files
 
  ABSTRACT
      Is this source file an abstract class.
 
      A property on a source file that indicates if the source file
      represents a class that is abstract.  This only makes sense for
      languages that have a notion of an abstract class and it is only used
      by some tools that wrap classes into other languages.
 
  COMPILE_DEFINITIONS
      Preprocessor definitions for compiling a source file.
 
      The COMPILE_DEFINITIONS property may be set to a semicolon-separated
      list of preprocessor definitions using the syntax VAR or VAR=value.
      Function-style definitions are not supported.  CMake will
      automatically escape the value correctly for the native build system
      (note that CMake language syntax may require escapes to specify some
      values).  This property may be set on a per-configuration basis using
      the name COMPILE_DEFINITIONS_<CONFIG> where <CONFIG> is an upper-case
      name (ex.  "COMPILE_DEFINITIONS_DEBUG").
 
      CMake will automatically drop some definitions that are not supported
      by the native build tool.  The VS6 IDE does not support definition
      values with spaces (but NMake does).  Xcode does not support
      per-configuration definitions on source files.
 
      Disclaimer: Most native build tools have poor support for escaping
      certain values.  CMake has work-arounds for many cases but some values
      may just not be possible to pass correctly.  If a value does not seem
      to be escaped correctly, do not attempt to work-around the problem by
      adding escape sequences to the value.  Your work-around may break in a
      future version of CMake that has improved escape support.  Instead
      consider defining the macro in a (configured) header file.  Then
      report the limitation.
 
  COMPILE_DEFINITIONS_<CONFIG>
      Per-configuration preprocessor definitions on a source file.
 
      This is the configuration-specific version of COMPILE_DEFINITIONS.
      Note that Xcode does not support per-configuration source file flags
      so this property will be ignored by the Xcode generator.
 
  COMPILE_FLAGS
      Additional flags to be added when compiling this source file.
 
      These flags will be added to the list of compile flags when this
      source file builds.  Use COMPILE_DEFINITIONS to pass additional
      preprocessor definitions.
 
  EXTERNAL_OBJECT
      If set to true then this is an object file.
 
      If this property is set to true then the source file is really an
      object file and should not be compiled.  It will still be linked into
      the target though.
 
  GENERATED
      Is this source file generated as part of the build process.
 
      If a source file is generated by the build process CMake will handle
      it differently in terms of dependency checking etc.  Otherwise having
      a non-existent source file could create problems.
 
  HEADER_FILE_ONLY
      Is this source file only a header file.
 
      A property on a source file that indicates if the source file is a
      header file with no associated implementation.  This is set
      automatically based on the file extension and is used by CMake to
      determine is certain dependency information should be computed.
 
  KEEP_EXTENSION
      Make the output file have the same extension as the source file.
 
      If this property is set then the file extension of the output file
      will be the same as that of the source file.  Normally the output file
      extension is computed based on the language of the source file, for
      example .cxx will go to a .o extension.
 
  LABELS
      Specify a list of text labels associated with a source file.
 
      This property has meaning only when the source file is listed in a
      target whose LABELS property is also set.  No other semantics are
      currently specified.
 
  LANGUAGE
      What programming language is the file.
 
      A property that can be set to indicate what programming language the
      source file is.  If it is not set the language is determined based on
      the file extension.  Typical values are CXX C etc.
 
  LOCATION
      The full path to a source file.
 
      A read only property on a SOURCE FILE that contains the full path to
      the source file.
 
  MACOSX_PACKAGE_LOCATION
      Place a source file inside a Mac OS X bundle or framework.
 
      Executable targets with the MACOSX_BUNDLE property set are built as
      Mac OS X application bundles on Apple platforms.  Shared library
      targets with the FRAMEWORK property set are built as Mac OS X
      frameworks on Apple platforms.  Source files listed in the target with
      this property set will be copied to a directory inside the bundle or
      framework content folder specified by the property value.  For bundles
      the content folder is "<name>.app/Contents".  For frameworks the
      content folder is "<name>.framework/Versions/<version>".  See the
      PUBLIC_HEADER, PRIVATE_HEADER, and RESOURCE target properties for
      specifying files meant for Headers, PrivateHeaders, or Resources
      directories.
 
  OBJECT_DEPENDS
      Additional files on which a compiled object file depends.
 
      Specifies a semicolon-separated list of full-paths to files on which
      any object files compiled from this source file depend.  An object
      file will be recompiled if any of the named files is newer than it.
 
      This property need not be used to specify the dependency of a source
      file on a generated header file that it includes.  Although the
      property was originally introduced for this purpose, it is no longer
      necessary.  If the generated header file is created by a custom
      command in the same target as the source file, the automatic
      dependency scanning process will recognize the dependency.  If the
      generated header file is created by another target, an inter-target
      dependency should be created with the add_dependencies command (if one
      does not already exist due to linking relationships).
 
  OBJECT_OUTPUTS
      Additional outputs for a Makefile rule.
 
      Additional outputs created by compilation of this source file.  If any
      of these outputs is missing the object will be recompiled.  This is
      supported only on Makefile generators and will be ignored on other
      generators.
 
  SYMBOLIC
      Is this just a name for a rule.
 
      If SYMBOLIC (boolean) is set to true the build system will be informed
      that the source file is not actually created on disk but instead used
      as a symbolic name for a build rule.
 
  WRAP_EXCLUDE
      Exclude this source file from any code wrapping techniques.
 
      Some packages can wrap source files into alternate languages to
      provide additional functionality.  For example, C++ code can be
      wrapped into Java or Python etc using SWIG etc.  If WRAP_EXCLUDE is
      set to true (1 etc) that indicates then this source file should not be
      wrapped.
 
------------------------------------------------------------------------------
Properties on Cache Entries
 
  ADVANCED
      True if entry should be hidden by default in GUIs.
 
      This is a boolean value indicating whether the entry is considered
      interesting only for advanced configuration.  The mark_as_advanced()
      command modifies this property.
 
  HELPSTRING
      Help associated with entry in GUIs.
 
      This string summarizes the purpose of an entry to help users set it
      through a CMake GUI.
 
  MODIFIED
      Internal management property.  Do not set or get.
 
      This is an internal cache entry property managed by CMake to track
      interactive user modification of entries.  Ignore it.
 
  STRINGS
      Enumerate possible STRING entry values for GUI selection.
 
      For cache entries with type STRING, this enumerates a set of values.
      CMake GUIs may use this to provide a selection widget instead of a
      generic string entry field.  This is for convenience only.  CMake does
      not enforce that the value matches one of those listed.
 
  TYPE
      Widget type for entry in GUIs.
 
      Cache entry values are always strings, but CMake GUIs present widgets
      to help users set values.  The GUIs use this property as a hint to
      determine the widget type.  Valid TYPE values are:
 
        BOOL          = Boolean ON/OFF value.
        PATH          = Path to a directory.
        FILEPATH      = Path to a file.
        STRING        = Generic string value.
        INTERNAL      = Do not present in GUI at all.
        STATIC        = Value managed by CMake, do not change.
        UNINITIALIZED = Type not yet specified.
 
      Generally the TYPE of a cache entry should be set by the command which
      creates it (set, option, find_library, etc.).
 
  VALUE
      Value of a cache entry.
 
      This property maps to the actual value of a cache entry.  Setting this
      property always sets the value without checking, so use with care.
 
------------------------------------------------------------------------------
Compatibility Commands
 
  CMake Compatibility Listfile Commands - Obsolete commands supported by CMake for compatibility.
 
This is the documentation for now obsolete listfile commands from previous
CMake versions, which are still supported for compatibility reasons.  You
should instead use the newer, faster and shinier new commands.  ;-)
 
  build_name
      Deprecated.  Use ${CMAKE_SYSTEM} and ${CMAKE_CXX_COMPILER} instead.
 
        build_name(variable)
 
      Sets the specified variable to a string representing the platform and
      compiler settings.  These values are now available through the
      CMAKE_SYSTEM and CMAKE_CXX_COMPILER variables.
 
  exec_program
      Deprecated.  Use the execute_process() command instead.
 
      Run an executable program during the processing of the CMakeList.txt
      file.
 
        exec_program(Executable [directory in which to run]
                      [ARGS <arguments to executable>]
                      [OUTPUT_VARIABLE <var>]
                      [RETURN_VALUE <var>])
 
      The executable is run in the optionally specified directory.  The
      executable can include arguments if it is double quoted, but it is
      better to use the optional ARGS argument to specify arguments to the
      program.  This is because cmake will then be able to escape spaces in
      the executable path.  An optional argument OUTPUT_VARIABLE specifies a
      variable in which to store the output.  To capture the return value of
      the execution, provide a RETURN_VALUE.  If OUTPUT_VARIABLE is
      specified, then no output will go to the stdout/stderr of the console
      running cmake.
 
 
  export_library_dependencies
      Deprecated.  Use INSTALL(EXPORT) or EXPORT command.
 
      This command generates an old-style library dependencies file.
      Projects requiring CMake 2.6 or later should not use the command.  Use
      instead the install(EXPORT) command to help export targets from an
      installation tree and the export() command to export targets from a
      build tree.
 
      The old-style library dependencies file does not take into account
      per-configuration names of libraries or the LINK_INTERFACE_LIBRARIES
      target property.
 
        export_library_dependencies(<file> [APPEND])
 
      Create a file named <file> that can be included into a CMake listfile
      with the INCLUDE command.  The file will contain a number of SET
      commands that will set all the variables needed for library dependency
      information.  This should be the last command in the top level
      CMakeLists.txt file of the project.  If the APPEND option is
      specified, the SET commands will be appended to the given file instead
      of replacing it.
 
  install_files
      Deprecated.  Use the install(FILES ) command instead.
 
      This command has been superceded by the install command.  It is
      provided for compatibility with older CMake code.  The FILES form is
      directly replaced by the FILES form of the install command.  The
      regexp form can be expressed more clearly using the GLOB form of the
      file command.
 
        install_files(<dir> extension file file ...)
 
      Create rules to install the listed files with the given extension into
      the given directory.  Only files existing in the current source tree
      or its corresponding location in the binary tree may be listed.  If a
      file specified already has an extension, that extension will be
      removed first.  This is useful for providing lists of source files
      such as foo.cxx when you want the corresponding foo.h to be installed.
      A typical extension is '.h'.
 
        install_files(<dir> regexp)
 
      Any files in the current source directory that match the regular
      expression will be installed.
 
        install_files(<dir> FILES file file ...)
 
      Any files listed after the FILES keyword will be installed explicitly
      from the names given.  Full paths are allowed in this form.
 
      The directory <dir> is relative to the installation prefix, which is
      stored in the variable CMAKE_INSTALL_PREFIX.
 
  install_programs
      Deprecated.  Use the install(PROGRAMS ) command instead.
 
      This command has been superceded by the install command.  It is
      provided for compatibility with older CMake code.  The FILES form is
      directly replaced by the PROGRAMS form of the INSTALL command.  The
      regexp form can be expressed more clearly using the GLOB form of the
      FILE command.
 
        install_programs(<dir> file1 file2 [file3 ...])
        install_programs(<dir> FILES file1 [file2 ...])
 
      Create rules to install the listed programs into the given directory.
      Use the FILES argument to guarantee that the file list version of the
      command will be used even when there is only one argument.
 
        install_programs(<dir> regexp)
 
      In the second form any program in the current source directory that
      matches the regular expression will be installed.
 
      This command is intended to install programs that are not built by
      cmake, such as shell scripts.  See the TARGETS form of the INSTALL
      command to create installation rules for targets built by cmake.
 
      The directory <dir> is relative to the installation prefix, which is
      stored in the variable CMAKE_INSTALL_PREFIX.
 
  install_targets
      Deprecated.  Use the install(TARGETS ) command instead.
 
      This command has been superceded by the install command.  It is
      provided for compatibility with older CMake code.
 
        install_targets(<dir> [RUNTIME_DIRECTORY dir] target target)
 
      Create rules to install the listed targets into the given directory.
      The directory <dir> is relative to the installation prefix, which is
      stored in the variable CMAKE_INSTALL_PREFIX.  If RUNTIME_DIRECTORY is
      specified, then on systems with special runtime files (Windows DLL),
      the files will be copied to that directory.
 
  link_libraries
      Deprecated.  Use the target_link_libraries() command instead.
 
      Link libraries to all targets added later.
 
        link_libraries(library1 <debug | optimized> library2 ...)
 
      Specify a list of libraries to be linked into any following targets
      (typically added with the add_executable or add_library calls).  This
      command is passed down to all subdirectories.  The debug and optimized
      strings may be used to indicate that the next library listed is to be
      used only for that specific type of build.
 
  make_directory
      Deprecated.  Use the file(MAKE_DIRECTORY ) command instead.
 
        make_directory(directory)
 
      Creates the specified directory.  Full paths should be given.  Any
      parent directories that do not exist will also be created.  Use with
      care.
 
  remove
      Deprecated.  Use the list(REMOVE_ITEM ) command instead.
 
        remove(VAR VALUE VALUE ...)
 
      Removes VALUE from the variable VAR.  This is typically used to remove
      entries from a vector (e.g.  semicolon separated list).  VALUE is
      expanded.
 
  subdir_depends
      Deprecated.  Does nothing.
 
        subdir_depends(subdir dep1 dep2 ...)
 
      Does not do anything.  This command used to help projects order
      parallel builds correctly.  This functionality is now automatic.
 
  subdirs
      Deprecated.  Use the add_subdirectory() command instead.
 
      Add a list of subdirectories to the build.
 
        subdirs(dir1 dir2 ...[EXCLUDE_FROM_ALL exclude_dir1 exclude_dir2 ...]
                [PREORDER] )
 
      Add a list of subdirectories to the build.  The add_subdirectory
      command should be used instead of subdirs although subdirs will still
      work.  This will cause any CMakeLists.txt files in the sub directories
      to be processed by CMake.  Any directories after the PREORDER flag are
      traversed first by makefile builds, the PREORDER flag has no effect on
      IDE projects.  Any directories after the EXCLUDE_FROM_ALL marker will
      not be included in the top level makefile or project file.  This is
      useful for having CMake create makefiles or projects for a set of
      examples in a project.  You would want CMake to generate makefiles or
      project files for all the examples at the same time, but you would not
      want them to show up in the top level project or be built each time
      make is run from the top.
 
  use_mangled_mesa
      Copy mesa headers for use in combination with system GL.
 
        use_mangled_mesa(PATH_TO_MESA OUTPUT_DIRECTORY)
 
      The path to mesa includes, should contain gl_mangle.h.  The mesa
      headers are copied to the specified output directory.  This allows
      mangled mesa headers to override other GL headers by being added to
      the include directory path earlier.
 
  utility_source
      Specify the source tree of a third-party utility.
 
        utility_source(cache_entry executable_name
                        path_to_source [file1 file2 ...])
 
      When a third-party utility's source is included in the distribution,
      this command specifies its location and name.  The cache entry will
      not be set unless the path_to_source and all listed files exist.  It
      is assumed that the source tree of the utility will have been built
      before it is needed.
 
      When cross compiling CMake will print a warning if a utility_source()
      command is executed, because in many cases it is used to build an
      executable which is executed later on.  This doesn't work when cross
      compiling, since the executable can run only on their target platform.
      So in this case the cache entry has to be adjusted manually so it
      points to an executable which is runnable on the build host.
 
  variable_requires
      Deprecated.  Use the if() command instead.
 
      Assert satisfaction of an option's required variables.
 
        variable_requires(TEST_VARIABLE RESULT_VARIABLE
                          REQUIRED_VARIABLE1
                          REQUIRED_VARIABLE2 ...)
 
      The first argument (TEST_VARIABLE) is the name of the variable to be
      tested, if that variable is false nothing else is done.  If
      TEST_VARIABLE is true, then the next argument (RESULT_VARIABLE) is a
      variable that is set to true if all the required variables are set.
      The rest of the arguments are variables that must be true or not set
      to NOTFOUND to avoid an error.  If any are not true, an error is
      reported.
 
  write_file
      Deprecated.  Use the file(WRITE ) command instead.
 
        write_file(filename "message to write"... [APPEND])
 
      The first argument is the file name, the rest of the arguments are
      messages to write.  If the argument APPEND is specified, then the
      message will be appended.
 
      NOTE 1: file(WRITE ...  and file(APPEND ...  do exactly the same as
      this one but add some more functionality.
 
      NOTE 2: When using write_file the produced file cannot be used as an
      input to CMake (CONFIGURE_FILE, source file ...) because it will lead
      to an infinite loop.  Use configure_file if you want to generate input
      files to CMake.
 
------------------------------------------------------------------------------
Standard CMake Modules
 
The following modules are provided with CMake.  They can be used with
INCLUDE(ModuleName).
 
  CMake Modules - Modules coming with CMake, the Cross-Platform Makefile Generator.
 
This is the documentation for the modules and scripts coming with CMake.
Using these modules you can check the computer system for installed software
packages, features of the compiler and the existance of headers to name just
a few.
 
  AddFileDependencies
      ADD_FILE_DEPENDENCIES(source_file depend_files...)
 
      Adds the given files as dependencies to source_file
 
 
  BundleUtilities
       
 
      BundleUtilities.cmake
 
      A collection of CMake utility functions useful for dealing with .app
      bundles on the Mac and bundle-like directories on any OS.
 
      The following functions are provided by this script:
 
          get_bundle_main_executable
          get_dotapp_dir
          get_bundle_and_executable
          get_bundle_all_executables
          get_item_key
          clear_bundle_keys
          set_bundle_key_values
          get_bundle_keys
          copy_resolved_item_into_bundle
          fixup_bundle_item
          fixup_bundle
          copy_and_fixup_bundle
          verify_bundle_prerequisites
          verify_bundle_symlinks
          verify_app
 
     
 
      Requires CMake 2.6 or greater because it uses function, break and
      PARENT_SCOPE.  Also depends on GetPrerequisites.cmake.
 
  CMakeBackwardCompatibilityCXX
      define a bunch of backwards compatibility variables
 
        CMAKE_ANSI_CXXFLAGS - flag for ansi c++
        CMAKE_HAS_ANSI_STRING_STREAM - has <strstream>
        INCLUDE(TestForANSIStreamHeaders)
        INCLUDE(CheckIncludeFileCXX)
        INCLUDE(TestForSTDNamespace)
        INCLUDE(TestForANSIForScope)
 
 
  CMakeDependentOption
      Macro to provide an option dependent on other options.
 
      This macro presents an option to the user only if a set of other
      conditions are true.  When the option is not presented a default value
      is used, but any value set by the user is preserved for when the
      option is presented again.  Example invocation:
 
        CMAKE_DEPENDENT_OPTION(USE_FOO "Use Foo" ON
                                "USE_BAR;NOT USE_ZOT" OFF)
 
      If USE_BAR is true and USE_ZOT is false, this provides an option
      called USE_FOO that defaults to ON.  Otherwise, it sets USE_FOO to
      OFF.  If the status of USE_BAR or USE_ZOT ever changes, any value for
      the USE_FOO option is saved so that when the option is re-enabled it
      retains its old value.
 
  CMakeDetermineVSServicePack
      Includes a public function for assisting users in trying to determine
      the
 
      Visual Studio service pack in use.
 
      Sets the passed in variable to one of the following values or an empty
      string if unknown.
 
          vc80
          vc80sp1
          vc90
          vc90sp1
 
     
 
      Usage: ===========================
 
          if(MSVC)
              include(CMakeDetermineVSServicePack)
              DetermineVSServicePack( my_service_pack )
 
     
 
              if( my_service_pack )
                  message(STATUS "Detected: ${my_service_pack}")
              endif()
          endif()
 
     
 
      ===========================
 
  CMakeFindFrameworks
      helper module to find OSX frameworks
 
  CMakeForceCompiler
       
 
      This module defines macros intended for use by cross-compiling
      toolchain files when CMake is not able to automatically detect the
      compiler identification.
 
      Macro CMAKE_FORCE_C_COMPILER has the following signature:
 
          CMAKE_FORCE_C_COMPILER(<compiler> <compiler-id>)
 
      It sets CMAKE_C_COMPILER to the given compiler and the cmake internal
      variable CMAKE_C_COMPILER_ID to the given compiler-id.  It also
      bypasses the check for working compiler and basic compiler information
      tests.
 
      Macro CMAKE_FORCE_CXX_COMPILER has the following signature:
 
          CMAKE_FORCE_CXX_COMPILER(<compiler> <compiler-id>)
 
      It sets CMAKE_CXX_COMPILER to the given compiler and the cmake
      internal variable CMAKE_CXX_COMPILER_ID to the given compiler-id.  It
      also bypasses the check for working compiler and basic compiler
      information tests.
 
      Macro CMAKE_FORCE_Fortran_COMPILER has the following signature:
 
          CMAKE_FORCE_Fortran_COMPILER(<compiler> <compiler-id>)
 
      It sets CMAKE_Fortran_COMPILER to the given compiler and the cmake
      internal variable CMAKE_Fortran_COMPILER_ID to the given compiler-id.
      It also bypasses the check for working compiler and basic compiler
      information tests.
 
      So a simple toolchain file could look like this:
 
          INCLUDE (CMakeForceCompiler)
          SET(CMAKE_SYSTEM_NAME Generic)
          CMAKE_FORCE_C_COMPILER  (chc12 MetrowerksHicross)
          CMAKE_FORCE_CXX_COMPILER (chc12 MetrowerksHicross)
 
 
  CMakePrintSystemInformation
      print system information
 
      This file can be used for diagnostic purposes just include it in a
      project to see various internal CMake variables.
 
  CMakeVerifyManifest
       
 
      CMakeVerifyManifest.cmake
 
      This script is used to verify that embeded manifests and side by side
      manifests for a project match.  To run this script, cd to a directory
      and run the script with cmake -P.  On the command line you can pass in
      versions that are OK even if not found in the .manifest files.  For
      example, cmake -Dallow_versions=8.0.50608.0
      -PCmakeVerifyManifest.cmake could be used to allow an embeded manifest
      of 8.0.50608.0 to be used in a project even if that version was not
      found in the .manifest file.
 
  CPack
      Build binary and source package installers
 
     
 
      The CPack module generates binary and source installers in a variety
      of formats using the cpack program.  Inclusion of the CPack module
      adds two new targets to the resulting makefiles, package and
      package_source, which build the binary and source installers,
      respectively.  The generated binary installers contain everything
      installed via CMake's INSTALL command (and the deprecated
      INSTALL_FILES, INSTALL_PROGRAMS, and INSTALL_TARGETS commands).
 
      For certain kinds of binary installers (including the graphical
      installers on Mac OS X and Windows), CPack generates installers that
      allow users to select individual application components to install.
      The contents of each of the components are identified by the COMPONENT
      argument of CMake's INSTALL command.  These components can be
      annotated with user-friendly names and descriptions, inter-component
      dependencies, etc., and grouped in various ways to customize the
      resulting installer.  See the cpack_add_* commands, described below,
      for more information about component-specific installations.
 
      Before including the CPack module, there are a variety of variables
      that can be set to customize the resulting installers.  The most
      commonly-used variables are:
 
          CPACK_PACKAGE_NAME - The name of the package (or application). If
          not specified, defaults to the project name.
 
     
 
          CPACK_PACKAGE_VENDOR - The name of the package vendor (e.g.,
          "Kitware").
 
     
 
          CPACK_PACKAGE_VERSION_MAJOR - Package major Version
 
     
 
          CPACK_PACKAGE_VERSION_MINOR - Package minor Version
 
     
 
          CPACK_PACKAGE_VERSION_PATCH - Package patch Version
 
     
 
          CPACK_PACKAGE_DESCRIPTION_FILE - A text file used to describe the
          project. Used, for example, the introduction screen of a
          CPack-generated Windows installer to describe the project.
 
     
 
          CPACK_PACKAGE_DESCRIPTION_SUMMARY - Short description of the
          project (only a few words).
 
     
 
          CPACK_PACKAGE_FILE_NAME - The name of the package file to generate,
          not including the extension. For example, cmake-2.6.1-Linux-i686.
 
     
 
          CPACK_PACKAGE_INSTALL_DIRECTORY - Installation directory on the
          target system, e.g., "CMake 2.5".
 
     
 
          CPACK_RESOURCE_FILE_LICENSE - License file for the project, which
          will typically be displayed to the user (often with an explicit
          "Accept" button, for graphical installers) prior to installation.
 
     
 
          CPACK_RESOURCE_FILE_README - ReadMe file for the project, which
          typically describes in some detail
 
     
 
          CPACK_RESOURCE_FILE_WELCOME - Welcome file for the project, which
          welcomes users to this installer. Typically used in the graphical
          installers on Windows and Mac OS X.
 
     
 
          CPACK_MONOLITHIC_INSTALL - Disables the component-based
          installation mechanism, so that all components are always installed.
 
     
 
          CPACK_GENERATOR - List of CPack generators to use. If not
          specified, CPack will create a set of options (e.g.,
          CPACK_BINARY_NSIS) allowing the user to enable/disable individual
          generators.
 
     
 
          CPACK_OUTPUT_CONFIG_FILE - The name of the CPack configuration file
          for binary installers that will be generated by the CPack
          module. Defaults to CPackConfig.cmake.
 
     
 
          CPACK_PACKAGE_EXECUTABLES - Lists each of the executables along
          with a text label, to be used to create Start Menu shortcuts on
          Windows. For example, setting this to the list ccmake;CMake will
          create a shortcut named "CMake" that will execute the installed
          executable ccmake.
 
     
 
          CPACK_STRIP_FILES - List of files to be stripped. Starting with
          CMake 2.6.0 CPACK_STRIP_FILES will be a boolean variable which
          enables stripping of all files (a list of files evaluates to TRUE
          in CMake, so this change is compatible).
 
     
 
      The following CPack variables are specific to source packages, and
      will not affect binary packages:
 
          CPACK_SOURCE_PACKAGE_FILE_NAME - The name of the source package,
          e.g., cmake-2.6.1
 
     
 
          CPACK_SOURCE_STRIP_FILES - List of files in the source tree that
          will be stripped. Starting with CMake 2.6.0
          CPACK_SOURCE_STRIP_FILES will be a boolean variable which enables
          stripping of all files (a list of files evaluates to TRUE in CMake,
          so this change is compatible).
 
     
 
          CPACK_SOURCE_GENERATOR - List of generators used for the source
          packages. As with CPACK_GENERATOR, if this is not specified then
          CPack will create a set of options (e.g., CPACK_SOURCE_ZIP)
          allowing users to select which packages will be generated.
 
     
 
          CPACK_SOURCE_OUTPUT_CONFIG_FILE - The name of the CPack
          configuration file for source installers that will be generated by
          the CPack module. Defaults to CPackSourceConfig.cmake.
 
     
 
          CPACK_SOURCE_IGNORE_FILES - Pattern of files in the source tree
          that won't be packaged when building a source package. This is a
          list of patterns, e.g., /CVS/;/\\.svn/;\\.swp$;\\.#;/#;.*~;cscope.*
 
     
 
      The following variables are specific to the DragNDrop installers built
      on Mac OS X:
 
          CPACK_DMG_VOLUME_NAME - The volume name of the generated disk
          image. Defaults to CPACK_PACKAGE_FILE_NAME.
 
     
 
          CPACK_DMG_FORMAT - The disk image format. Common values are UDRO
          (UDIF read-only), UDZO (UDIF zlib-compressed) or UDBZ (UDIF
          bzip2-compressed). Refer to hdiutil(1) for more information on
          other available formats.
 
     
 
          CPACK_DMG_DS_STORE - Path to a custom .DS_Store file which e.g.
          can be used to specify the Finder window position/geometry and
          layout (such as hidden toolbars, placement of the icons etc.).
          This file has to be generated by the Finder (either manually or
          through OSA-script) using a normal folder from which the .DS_Store
          file can then be extracted.
 
     
 
          CPACK_DMG_BACKGROUND_IMAGE - Path to an image file which is to be
          used as the background for the Finder Window when the disk image
          is opened.  By default no background image is set. The background
          image is applied after applying the custom .DS_Store file.
 
     
 
          CPACK_COMMAND_HDIUTIL - Path to the hdiutil(1) command used to
          operate on disk image files on Mac OS X. This variable can be used
          to override the automatically detected command (or specify its
          location if the auto-detection fails to find it.)
 
     
 
          CPACK_COMMAND_SETFILE - Path to the SetFile(1) command used to set
          extended attributes on files and directories on Mac OS X. This
          variable can be used to override the automatically detected
          command (or specify its location if the auto-detection fails to
          find it.)
 
     
 
          CPACK_COMMAND_REZ - Path to the Rez(1) command used to compile
          resources on Mac OS X. This variable can be used to override the
          automatically detected command (or specify its location if the
          auto-detection fails to find it.)
 
     
 
      Installers built on Mac OS X using the Bundle generator use the
      aforementioned DragNDrop variables, plus the following Bundle-specific
      parameters:
 
          CPACK_BUNDLE_NAME - The name of the generated bundle.  This
          appears in the OSX finder as the bundle name.  Required.
 
     
 
          CPACK_BUNDLE_PLIST - Path to an OSX plist file that will be used
          as the Info.plist for the generated bundle.  This assumes that
          the caller has generated or specified their own Info.plist file.
          Required.
 
     
 
          CPACK_BUNDLE_ICON - Path to an OSX icns file that will be used as
          the icon for the generated bundle.  This is the icon that appears
          in the OSX finder for the bundle, and in the OSX dock when the
          bundle is opened.  Required.
 
     
 
          CPACK_BUNDLE_STARTUP_SCRIPT - Path to an executable or script that
          will be run whenever an end-user double-clicks the generated bundle
          in the OSX Finder.  Optional.
 
     
 
      The following variables are specific to the graphical installers built
      on Windows using the Nullsoft Installation System.
 
          CPACK_PACKAGE_INSTALL_REGISTRY_KEY - Registry key used when
          installing this project.
 
     
 
          CPACK_NSIS_MUI_ICON - The icon file (.ico) for the generated
          install program.
 
     
 
          CPACK_NSIS_MUI_UNIICON - The icon file (.ico) for the generated
          uninstall program.
 
     
 
          CPACK_PACKAGE_ICON - A branding image that will be displayed inside
          the installer.
 
     
 
          CPACK_NSIS_EXTRA_INSTALL_COMMANDS - Extra NSIS commands that will
          be added to the install Section.
 
     
 
          CPACK_NSIS_EXTRA_UNINSTALL_COMMANDS - Extra NSIS commands that will
          be added to the uninstall Section.
 
     
 
          CPACK_NSIS_COMPRESSOR - The arguments that will be passed to the
          NSIS SetCompressor command.
 
     
 
          CPACK_NSIS_MODIFY_PATH - If this is set to "ON", then an extra page
          will appear in the installer that will allow the user to choose
          whether the program directory should be added to the system PATH
          variable.
 
     
 
          CPACK_NSIS_DISPLAY_NAME - The display name string that appears in
          the Windows Add/Remove Program control panel
 
     
 
          CPACK_NSIS_PACKAGE_NAME - The title displayed at the top of the
          installer.
 
     
 
          CPACK_NSIS_INSTALLED_ICON_NAME - A path to the executable that
          contains the installer icon.
 
     
 
          CPACK_NSIS_HELP_LINK - URL to a web site providing assistance in
          installing your application.
 
     
 
          CPACK_NSIS_URL_INFO_ABOUT - URL to a web site providing more
          information about your application.
 
     
 
          CPACK_NSIS_CONTACT - Contact information for questions and comments
          about the installation process.
 
     
 
          CPACK_NSIS_CREATE_ICONS_EXTRA - Additional NSIS commands for
          creating start menu shortcuts.
 
     
 
          CPACK_NSIS_DELETE_ICONS_EXTRA -Additional NSIS commands to
          uninstall start menu shortcuts.
 
     
 
      The following variable is specific to installers build on Mac OS X
      using PackageMaker:
 
          CPACK_OSX_PACKAGE_VERSION - The version of Mac OS X that the
          resulting PackageMaker archive should be compatible
          with. Different versions of Mac OS X support different
          features. For example, CPack can only build component-based
          installers for Mac OS X 10.4 or newer, and can only build
          installers that download component son-the-fly for Mac OS X 10.5
          or newer. If left blank, this value will be set to the minimum
          version of Mac OS X that supports the requested features. Set this
          variable to some value (e.g., 10.4) only if you want to guarantee
          that your installer will work on that version of Mac OS X, and
          don't mind missing extra features available in the installer
          shipping with later versions of Mac OS X.
 
     
 
      The following variables are for advanced uses of CPack:
 
          CPACK_CMAKE_GENERATOR - What CMake generator should be used if the
          project is CMake project. Defaults to the value of CMAKE_GENERATOR;
          few users will want to change this setting.
 
     
 
          CPACK_INSTALL_CMAKE_PROJECTS - List of four values that specify
          what project to install. The four values are: Build directory,
          Project Name, Project Component, Directory. If omitted, CPack will
          build an installer that installers everything.
 
     
 
          CPACK_SYSTEM_NAME - System name, defaults to the value of
          ${CMAKE_SYSTEM_NAME}.
 
     
 
          CPACK_PACKAGE_VERSION - Package full version, used internally. By
          default, this is built from CPACK_PACKAGE_VERSION_MAJOR,
          CPACK_PACKAGE_VERSION_MINOR, and CPACK_PACKAGE_VERSION_PATCH.
 
     
 
          CPACK_TOPLEVEL_TAG - Directory for the installed files.
 
     
 
          CPACK_INSTALL_COMMANDS - Extra commands to install components.
 
     
 
          CPACK_INSTALL_DIRECTORIES - Extra directories to install.
 
     
 
      Component-specific installation allows users to select specific sets
      of components to install during the install process.  Installation
      components are identified by the COMPONENT argument of CMake's INSTALL
      commands, and should be further described by the following CPack
      commands:
 
          cpack_add_component - Describes a CPack installation component
          named by the COMPONENT argument to a CMake INSTALL command.
 
     
 
            cpack_add_component(compname
                                [DISPLAY_NAME name]
                                [DESCRIPTION description]
                                [HIDDEN | REQUIRED | DISABLED ]
                                [GROUP group]
                                [DEPENDS comp1 comp2 ... ]
                                [INSTALL_TYPES type1 type2 ... ]
                                [DOWNLOADED]
                                [ARCHIVE_FILE filename])
 
     
 
          The cmake_add_component command describes an installation
          component, which the user can opt to install or remove as part of
          the graphical installation process. compname is the name of the
          component, as provided to the COMPONENT argument of one or more
          CMake INSTALL commands.
 
     
 
          DISPLAY_NAME is the displayed name of the component, used in
          graphical installers to display the component name. This value can
          be any string.
 
     
 
          DESCRIPTION is an extended description of the component, used in
          graphical installers to give the user additional information about
          the component. Descriptions can span multiple lines using "\n" as
          the line separator. Typically, these descriptions should be no
          more than a few lines long.
 
     
 
          HIDDEN indicates that this component will be hidden in the
          graphical installer, so that the user cannot directly change
          whether it is installed or not.
 
     
 
          REQUIRED indicates that this component is required, and therefore
          will always be installed. It will be visible in the graphical
          installer, but it cannot be unselected. (Typically, required
          components are shown greyed out).
 
     
 
          DISABLED indicates that this component should be disabled
          (unselected) by default. The user is free to select this component
          for installation, unless it is also HIDDEN.
 
     
 
          DEPENDS lists the components on which this component depends. If
          this component is selected, then each of the components listed
          must also be selected. The dependency information is encoded
          within the installer itself, so that users cannot install
          inconsitent sets of components.
 
     
 
          GROUP names the component group of which this component is a
          part. If not provided, the component will be a standalone
          component, not part of any component group. Component groups are
          described with the cpack_add_component_group command, detailed
          below.
 
     
 
          INSTALL_TYPES lists the installation types of which this component
          is a part. When one of these installations types is selected, this
          component will automatically be selected. Installation types are
          described with the cpack_add_install_type command, detailed below.
 
     
 
          DOWNLOADED indicates that this component should be downloaded
          on-the-fly by the installer, rather than packaged in with the
          installer itself. For more information, see the cpack_configure_downloads
          command.
 
     
 
          ARCHIVE_FILE provides a name for the archive file created by CPack
          to be used for downloaded components. If not supplied, CPack will
          create a file with some name based on CPACK_PACKAGE_FILE_NAME and
          the name of the component. See cpack_configure_downloads for more
          information.
 
     
 
          cpack_add_component_group - Describes a group of related CPack
          installation components.
 
     
 
            cpack_add_component_group(groupname
                                    [DISPLAY_NAME name]
                                    [DESCRIPTION description]
                                    [PARENT_GROUP parent]
                                    [EXPANDED]
                                    [BOLD_TITLE])
 
     
 
          The cpack_add_component_group describes a group of installation
          components, which will be placed together within the listing of
          options. Typically, component groups allow the user to
          select/deselect all of the components within a single group via a
          single group-level option. Use component groups to reduce the
          complexity of installers with many options. groupname is an
          arbitrary name used to identify the group in the GROUP argument of
          the cpack_add_component command, which is used to place a
          component in a group. The name of the group must not conflict with
          the name of any component.
 
     
 
          DISPLAY_NAME is the displayed name of the component group, used in
          graphical installers to display the component group name. This
          value can be any string.
 
     
 
          DESCRIPTION is an extended description of the component group,
          used in graphical installers to give the user additional
          information about the components within that group. Descriptions
          can span multiple lines using "\n" as the line
          separator. Typically, these descriptions should be no more than a
          few lines long.
 
     
 
          PARENT_GROUP, if supplied, names the parent group of this group.
          Parent groups are used to establish a hierarchy of groups,
          providing an arbitrary hierarchy of groups.
 
     
 
          EXPANDED indicates that, by default, the group should show up as
          "expanded", so that the user immediately sees all of the
          components within the group. Otherwise, the group will initially
          show up as a single entry.
 
     
 
          BOLD_TITLE indicates that the group title should appear in bold,
          to call the user's attention to the group.
 
     
 
          cpack_add_install_type - Add a new installation type containing a
          set of predefined component selections to the graphical installer.
                           
            cpack_add_install_type(typename
                                  [DISPLAY_NAME name]) 
 
     
 
          The cpack_add_install_type command identifies a set of preselected
          components that represents a common use case for an
          application. For example, a "Developer" install type might include
          an application along with its header and library files, while an
          "End user" install type might just include the application's
          executable. Each component identifies itself with one or more
          install types via the INSTALL_TYPES argument to
          cpack_add_component.
 
     
 
          DISPLAY_NAME is the displayed name of the install type, which will
          typically show up in a drop-down box within a graphical
          installer. This value can be any string.
 
     
 
          cpack_configure_downloads - Configure CPack to download selected
          components on-the-fly as part of the installation process.
 
     
 
            cpack_configure_downloads(site
                                      [UPLOAD_DIRECTORY dirname]
                                      [ALL]
                                      [ADD_REMOVE|NO_ADD_REMOVE])
 
     
 
          The cpack_configure_downloads command configures installation-time
          downloads of selected components. For each downloadable component,
          CPack will create an archive containing the contents of that
          component, which should be uploaded to the given site. When the
          user selects that component for installation, the installer will
          download and extract the component in place. This feature is
          useful for creating small installers that only download the
          requested components, saving bandwidth. Additionally, the
          installers are small enough that they will be installed as part of
          the normal installation process, and the "Change" button in
          Windows Add/Remove Programs control panel will allow one to add or
          remove parts of the application after the original
          installation. On Windows, the downloaded-components functionality
          requires the ZipDLL plug-in for NSIS, available at:
 
     
 
            http://nsis.sourceforge.net/ZipDLL_plug-in
 
     
 
          On Mac OS X, installers that download components on-the-fly can
          only be built and installed on system using Mac OS X 10.5 or
          later.
 
     
 
          The site argument is a URL where the archives for downloadable
          components will reside, e.g., http://www.cmake.org/files/2.6.1/installer/
          All of the archives produced by CPack should be uploaded to that location.
 
     
 
          UPLOAD_DIRECTORY is the local directory where CPack will create the
          various archives for each of the components. The contents of this
          directory should be uploaded to a location accessible by the URL given
          in the site argument. If omitted, CPack will use the directory
          CPackUploads inside the CMake binary directory to store the generated
          archives.
 
     
 
          The ALL flag indicates that all components be downloaded. Otherwise, only
          those components explicitly marked as DOWNLOADED or that have a specified
          ARCHIVE_FILE will be downloaded. Additionally, the ALL option implies
          ADD_REMOVE (unless NO_ADD_REMOVE is specified).
 
     
 
          ADD_REMOVE indicates that CPack should install a copy of the installer
          that can be called from Windows' Add/Remove Programs dialog (via the
          "Modify" button) to change the set of installed components. NO_ADD_REMOVE
          turns off this behavior. This option is ignored on Mac OS X.
 
 
  CPackDeb
      The builtin (binary) CPack Deb generator (Unix only)
 
      CPackDeb may be used to create Deb package using CPack.  CPackDeb is a
      CPack generator thus it uses the CPACK_XXX variables used by CPack :
      http://www.cmake.org/Wiki/CMake:CPackConfiguration
 
      However CPackRPM has specific features which are controlled by the
      specifics CPACK_RPM_XXX variables.You'll find a detailed usage on the
      wiki:
 
        http://www.cmake.org/Wiki/CMake:CPackPackageGenerators#DEB_.28UNIX_only.29
 
      However as a handy reminder here comes the list of specific variables:
 
        CPACK_DEBIAN_PACKAGE_NAME
            Mandatory : YES
            Default  : CPACK_PACKAGE_NAME (lower case)
            The debian package summary
 
      CPACK_DEBIAN_PACKAGE_VERSION
 
            Mandatory : YES
            Default  : CPACK_PACKAGE_VERSION
            The debian package version
 
      CPACK_DEBIAN_PACKAGE_ARCHITECTURE)
 
            Mandatory : YES
            Default  : Output of dpkg --print-architecture or i386
            The debian package architecture
 
      CPACK_DEBIAN_PACKAGE_DEPENDS
 
            Mandatory : NO
            Default  : -
            May be used to set deb dependencies.
 
      CPACK_DEBIAN_PACKAGE_MAINTAINER
 
            Mandatory : YES
            Default  : CPACK_PACKAGE_CONTACT
            The debian package maintainer
 
      CPACK_DEBIAN_PACKAGE_DESCRIPTION
 
            Mandatory : YES
            Default  : CPACK_PACKAGE_DESCRIPTION_SUMMARY
            The debian package description
 
      CPACK_DEBIAN_PACKAGE_SECTION
 
            Mandatory : YES
            Default  : 'devel'
            The debian package section
 
      CPACK_DEBIAN_PACKAGE_PRIORITY
 
            Mandatory : YES
            Default  : 'optional'
            The debian package priority
 
 
  CPackRPM
      The builtin (binary) CPack RPM generator (Unix only)
 
      CPackRPM may be used to create RPM package using CPack.  CPackRPM is a
      CPack generator thus it uses the CPACK_XXX variables used by CPack :
      http://www.cmake.org/Wiki/CMake:CPackConfiguration
 
      However CPackRPM has specific features which are controlled by the
      specifics CPACK_RPM_XXX variables.  You'll find a detailed usage on
      the wiki:
 
        http://www.cmake.org/Wiki/CMake:CPackPackageGenerators#RPM_.28Unix_Only.29
 
      However as a handy reminder here comes the list of specific variables:
 
        CPACK_RPM_PACKAGE_SUMMARY
            Mandatory : YES
            Default  : CPACK_PACKAGE_DESCRIPTION
            The RPM package summary
        CPACK_RPM_PACKAGE_NAME
            Mandatory : YES
            Default  : CPACK_PACKAGE_NAME
            The RPM package name
        CPACK_RPM_PACKAGE_VERSION
            Mandatory : YES
            Default  : CPACK_PACKAGE_VERSION
            The RPM package version
        CPACK_RPM_PACKAGE_ARCHITECTURE
            Mandatory : NO
            Default  : -
            The RPM package architecture. This may be set to "noarch" if you
            know you are building a noarch package.
        CPACK_RPM_PACKAGE_RELEASE
            Mandatory : YES
            Default  : 1
            The RPM package release. This is the numbering of the RPM package
            itself, i.e. the version of the packaging and not the version of the
            content (see CPACK_RPM_PACKAGE_VERSION). One may change the default
            value if the previous packaging was buggy and/or you want to put here
            a fancy Linux distro specific numbering.
        CPACK_RPM_PACKAGE_LICENSE
            Mandatory : YES
            Default  : "unknown"
            The RPM package license policy.
        CPACK_RPM_PACKAGE_GROUP
            Mandatory : YES
            Default  : "unknown"
            The RPM package group.
        CPACK_RPM_PACKAGE_VENDOR
            Mandatory : YES
            Default  : CPACK_PACKAGE_VENDOR if set or "unknown"
            The RPM package group.
        CPACK_RPM_PACKAGE_DESCRIPTION
            Mandatory : YES
            Default  : CPACK_PACKAGE_DESCRIPTION_FILE if set or "no package description available"
        CPACK_RPM_COMPRESSION_TYPE
            Mandatory : NO
            Default  : -
            May be used to override RPM compression type to be used
            to build the RPM. For example some Linux distribution now default
            to lzma or xz compression whereas older cannot use such RPM.
            Using this one can enforce compression type to be used.
            Possible value are: lzma, xz, bzip2 and gzip.
        CPACK_RPM_PACKAGE_REQUIRES
            Mandatory : NO
            Default  : -
            May be used to set RPM dependencies (requires).
            Note that you must enclose the complete requires string between quotes,
            for example:
            set(CPACK_RPM_PACKAGE_REQUIRES "python >= 2.5.0, cmake >= 2.8")
        CPACK_RPM_PACKAGES_PROVIDES
            Mandatory : NO
            Default  : -
            May be used to set RPM dependencies (provides).
        CPACK_RPM_SPEC_INSTALL_POST
            Mandatory : NO
            Default  : -
            May be used to set an RPM post-install command inside the spec file.
            For example setting it to "/bin/true" may be used to prevent
            rpmbuild to strip binaries.
        CPACK_RPM_SPEC_MORE_DEFINE
            Mandatory : NO
            Default  : -
            May be used to add any %define lines to the generated spec file.
        CPACK_RPM_PACKAGE_DEBUG
            Mandatory : NO
            Default  : -
            May be set when invoking cpack in order to trace debug informations
            during CPack RPM run. For example you may launch CPack like this
            cpack -D CPACK_RPM_PACKAGE_DEBUG=1 -G RPM
        CPACK_RPM_USER_BINARY_SPECFILE
            Mandatory : NO
            Default  : -
            May be set by the user in order to specify a USER binary spec file
            to be used by CPackRPM instead of generating the file.
            The specified file will be processed by CONFIGURE_FILE( @ONLY).
        CPACK_RPM_GENERATE_USER_BINARY_SPECFILE_TEMPLATE
            Mandatory : NO
            Default  : -
            If set CPack will generate a template for USER specified binary
            spec file and stop with an error. For example launch CPack like this
            cpack -D CPACK_RPM_GENERATE_USER_BINARY_SPECFILE_TEMPLATE=1 -G RPM
            The user may then use this file in order to hand-craft is own
            binary spec file which may be used with CPACK_RPM_USER_BINARY_SPECFILE.
        CPACK_RPM_PRE_INSTALL_SCRIPT_FILE
        CPACK_RPM_PRE_UNINSTALL_SCRIPT_FILE
            Mandatory : NO
            Default  : -
            May be used to embbed a pre (un)installation script in the spec file.
            The refered script file(s) will be read and directly
            put after the %pre or %preun section
            One may verify which scriptlet has been included with
            rpm -qp --scripts  package.rpm
        CPACK_RPM_POST_INSTALL_SCRIPT_FILE
        CPACK_RPM_POST_UNINSTALL_SCRIPT_FILE
            Mandatory : NO
            Default  : -
            May be used to embbed a post (un)installation script in the spec file.
            The refered script file(s) will be read and directly
            put after the %post or %postun section
            One may verify which scriptlet has been included with
            rpm -qp --scripts  package.rpm
 
 
  CTest
      Configure a project for testing with CTest/CDash
 
      Include this module in the top CMakeLists.txt file of a project to
      enable testing with CTest and dashboard submissions to CDash:
 
          project(MyProject)
          ...
          include(CTest)
 
      The module automatically creates a BUILD_TESTING option that selects
      whether to enable testing support (ON by default).  After including
      the module, use code like
 
          if(BUILD_TESTING)
            # ... CMake code to create tests ...
          endif()
 
      to creating tests when testing is enabled.
 
      To enable submissions to a CDash server, create a CTestConfig.cmake
      file at the top of the project with content such as
 
          set(CTEST_PROJECT_NAME "MyProject")
          set(CTEST_NIGHTLY_START_TIME "01:00:00 UTC")
          set(CTEST_DROP_METHOD "http")
          set(CTEST_DROP_SITE "my.cdash.org")
          set(CTEST_DROP_LOCATION "/submit.php?project=MyProject")
          set(CTEST_DROP_SITE_CDASH TRUE)
 
      (the CDash server can provide the file to a project administrator who
      configures 'MyProject').  Settings in the config file are shared by
      both this CTest module and the CTest command-line tool's dashboard
      script mode (ctest -S).
 
      While building a project for submission to CDash, CTest scans the
      build output for errors and warnings and reports them with surrounding
      context from the build log.  This generic approach works for all build
      tools, but does not give details about the command invocation that
      produced a given problem.  One may get more detailed reports by adding
 
          set(CTEST_USE_LAUNCHERS 1)
 
      to the CTestConfig.cmake file.  When this option is enabled, the CTest
      module tells CMake's Makefile generators to invoke every command in
      the generated build system through a CTest launcher program.
      (Currently the CTEST_USE_LAUNCHERS option is ignored on non-Makefile
      generators.) During a manual build each launcher transparently runs
      the command it wraps.  During a CTest-driven build for submission to
      CDash each launcher reports detailed information when its command
      fails or warns.  (Setting CTEST_USE_LAUNCHERS in CTestConfig.cmake is
      convenient, but also adds the launcher overhead even for manual
      builds.  One may instead set it in a CTest dashboard script and add it
      to the CMake cache for the build tree.)
 
  CTestScriptMode
       
 
      This file is read by ctest in script mode (-S)
 
  CheckCCompilerFlag
      Check whether the C compiler supports a given flag.
 
      CHECK_C_COMPILER_FLAG(<flag> <var>)
 
        <flag> - the compiler flag
        <var>  - variable to store the result
 
      This internally calls the check_c_source_compiles macro.  See help for
      CheckCSourceCompiles for a listing of variables that can modify the
      build.
 
  CheckCSourceCompiles
      Check if the given C source code compiles.
 
      CHECK_C_SOURCE_COMPILES(<code> <var> [FAIL_REGEX <fail-regex>])
 
        <code>      - source code to try to compile
        <var>        - variable to store whether the source code compiled
        <fail-regex> - fail if test output matches this regex
 
      The following variables may be set before calling this macro to modify
      the way the check is run:
 
        CMAKE_REQUIRED_FLAGS = string of compile command line flags
        CMAKE_REQUIRED_DEFINITIONS = list of macros to define (-DFOO=bar)
        CMAKE_REQUIRED_INCLUDES = list of include directories
        CMAKE_REQUIRED_LIBRARIES = list of libraries to link
 
 
  CheckCSourceRuns
      Check if the given C source code compiles and runs.
 
      CHECK_C_SOURCE_RUNS(<code> <var>)
 
        <code>  - source code to try to compile
        <var>    - variable to store the result
                    (1 for success, empty for failure)
 
      The following variables may be set before calling this macro to modify
      the way the check is run:
 
        CMAKE_REQUIRED_FLAGS = string of compile command line flags
        CMAKE_REQUIRED_DEFINITIONS = list of macros to define (-DFOO=bar)
        CMAKE_REQUIRED_INCLUDES = list of include directories
        CMAKE_REQUIRED_LIBRARIES = list of libraries to link
 
 
  CheckCXXCompilerFlag
      Check whether the CXX compiler supports a given flag.
 
      CHECK_CXX_COMPILER_FLAG(<flag> <var>)
 
        <flag> - the compiler flag
        <var>  - variable to store the result
 
      This internally calls the check_cxx_source_compiles macro.  See help
      for CheckCXXSourceCompiles for a listing of variables that can modify
      the build.
 
  CheckCXXSourceCompiles
      Check if the given C++ source code compiles.
 
      CHECK_CXX_SOURCE_COMPILES(<code> <var> [FAIL_REGEX <fail-regex>])
 
        <code>      - source code to try to compile
        <var>        - variable to store whether the source code compiled
        <fail-regex> - fail if test output matches this regex
 
      The following variables may be set before calling this macro to modify
      the way the check is run:
 
        CMAKE_REQUIRED_FLAGS = string of compile command line flags
        CMAKE_REQUIRED_DEFINITIONS = list of macros to define (-DFOO=bar)
        CMAKE_REQUIRED_INCLUDES = list of include directories
        CMAKE_REQUIRED_LIBRARIES = list of libraries to link
 
 
  CheckCXXSourceRuns
      Check if the given C++ source code compiles and runs.
 
      CHECK_CXX_SOURCE_RUNS(<code> <var>)
 
        <code>  - source code to try to compile
        <var>    - variable to store the result
                    (1 for success, empty for failure)
 
      The following variables may be set before calling this macro to modify
      the way the check is run:
 
        CMAKE_REQUIRED_FLAGS = string of compile command line flags
        CMAKE_REQUIRED_DEFINITIONS = list of macros to define (-DFOO=bar)
        CMAKE_REQUIRED_INCLUDES = list of include directories
        CMAKE_REQUIRED_LIBRARIES = list of libraries to link
 
 
  CheckFortranFunctionExists
      macro which checks if the Fortran function exists
 
      CHECK_FORTRAN_FUNCTION_EXISTS(FUNCTION VARIABLE)
 
        FUNCTION - the name of the Fortran function
        VARIABLE - variable to store the result
 
     
 
      The following variables may be set before calling this macro to modify
      the way the check is run:
 
        CMAKE_REQUIRED_LIBRARIES = list of libraries to link
 
 
  CheckFunctionExists
      macro which checks if the function exists
 
      CHECK_FUNCTION_EXISTS(FUNCTION VARIABLE)
 
        FUNCTION - the name of the function
        VARIABLE - variable to store the result
 
     
 
      The following variables may be set before calling this macro to modify
      the way the check is run:
 
        CMAKE_REQUIRED_FLAGS = string of compile command line flags
        CMAKE_REQUIRED_DEFINITIONS = list of macros to define (-DFOO=bar)
        CMAKE_REQUIRED_INCLUDES = list of include directories
        CMAKE_REQUIRED_LIBRARIES = list of libraries to link
 
 
  CheckIncludeFile
      macro which checks the include file exists.
 
      CHECK_INCLUDE_FILE(INCLUDE VARIABLE)
 
        INCLUDE  - name of include file
        VARIABLE - variable to return result
         
 
      an optional third argument is the CFlags to add to the compile line or
      you can use CMAKE_REQUIRED_FLAGS
 
      The following variables may be set before calling this macro to modify
      the way the check is run:
 
        CMAKE_REQUIRED_FLAGS = string of compile command line flags
        CMAKE_REQUIRED_DEFINITIONS = list of macros to define (-DFOO=bar)
        CMAKE_REQUIRED_INCLUDES = list of include directories
 
     
 
 
  CheckIncludeFileCXX
      Check if the include file exists.
 
        CHECK_INCLUDE_FILE_CXX(INCLUDE VARIABLE)
 
     
 
        INCLUDE  - name of include file
        VARIABLE - variable to return result
       
 
      An optional third argument is the CFlags to add to the compile line or
      you can use CMAKE_REQUIRED_FLAGS.
 
      The following variables may be set before calling this macro to modify
      the way the check is run:
 
        CMAKE_REQUIRED_FLAGS = string of compile command line flags
        CMAKE_REQUIRED_DEFINITIONS = list of macros to define (-DFOO=bar)
        CMAKE_REQUIRED_INCLUDES = list of include directories
 
     
 
 
  CheckIncludeFiles
      Check if the files can be included
 
     
 
      CHECK_INCLUDE_FILES(INCLUDE VARIABLE)
 
        INCLUDE  - list of files to include
        VARIABLE - variable to return result
 
     
 
      The following variables may be set before calling this macro to modify
      the way the check is run:
 
        CMAKE_REQUIRED_FLAGS = string of compile command line flags
        CMAKE_REQUIRED_DEFINITIONS = list of macros to define (-DFOO=bar)
        CMAKE_REQUIRED_INCLUDES = list of include directories
 
 
  CheckLibraryExists
      Check if the function exists.
 
      CHECK_LIBRARY_EXISTS (LIBRARY FUNCTION LOCATION VARIABLE)
 
        LIBRARY  - the name of the library you are looking for
        FUNCTION - the name of the function
        LOCATION - location where the library should be found
        VARIABLE - variable to store the result
 
     
 
      The following variables may be set before calling this macro to modify
      the way the check is run:
 
        CMAKE_REQUIRED_FLAGS = string of compile command line flags
        CMAKE_REQUIRED_DEFINITIONS = list of macros to define (-DFOO=bar)
        CMAKE_REQUIRED_LIBRARIES = list of libraries to link
 
 
  CheckStructHasMember
      Check if the given struct or class has the specified member variable
 
      CHECK_STRUCT_HAS_MEMBER (STRUCT MEMBER HEADER VARIABLE)
 
        STRUCT - the name of the struct or class you are interested in
        MEMBER - the member which existence you want to check
        HEADER - the header(s) where the prototype should be declared
        VARIABLE - variable to store the result
 
     
 
      The following variables may be set before calling this macro to modify
      the way the check is run:
 
        CMAKE_REQUIRED_FLAGS = string of compile command line flags
        CMAKE_REQUIRED_DEFINITIONS = list of macros to define (-DFOO=bar)
        CMAKE_REQUIRED_INCLUDES = list of include directories
 
     
 
      Example: CHECK_STRUCT_HAS_MEMBER("struct timeval" tv_sec sys/select.h
      HAVE_TIMEVAL_TV_SEC)
 
  CheckSymbolExists
      Check if the symbol exists in include files
 
      CHECK_SYMBOL_EXISTS(SYMBOL FILES VARIABLE)
 
        SYMBOL  - symbol
        FILES    - include files to check
        VARIABLE - variable to return result
 
     
 
      The following variables may be set before calling this macro to modify
      the way the check is run:
 
        CMAKE_REQUIRED_FLAGS = string of compile command line flags
        CMAKE_REQUIRED_DEFINITIONS = list of macros to define (-DFOO=bar)
        CMAKE_REQUIRED_INCLUDES = list of include directories
        CMAKE_REQUIRED_LIBRARIES = list of libraries to link
 
 
  CheckTypeSize
      Check sizeof a type
 
        CHECK_TYPE_SIZE(TYPE VARIABLE [BUILTIN_TYPES_ONLY])
 
      Check if the type exists and determine its size.  On return,
      "HAVE_${VARIABLE}" holds the existence of the type, and "${VARIABLE}"
      holds one of the following:
 
          <size> = type has non-zero size <size>
          "0"    = type has arch-dependent size (see below)
          ""    = type does not exist
 
      Furthermore, the variable "${VARIABLE}_CODE" holds C preprocessor code
      to define the macro "${VARIABLE}" to the size of the type, or leave
      the macro undefined if the type does not exist.
 
      The variable "${VARIABLE}" may be "0" when CMAKE_OSX_ARCHITECTURES has
      multiple architectures for building OS X universal binaries.  This
      indicates that the type size varies across architectures.  In this
      case "${VARIABLE}_CODE" contains C preprocessor tests mapping from
      each architecture macro to the corresponding type size.  The list of
      architecture macros is stored in "${VARIABLE}_KEYS", and the value for
      each key is stored in "${VARIABLE}-${KEY}".
 
      If the BUILTIN_TYPES_ONLY option is not given, the macro checks for
      headers <sys/types.h>, <stdint.h>, and <stddef.h>, and saves results
      in HAVE_SYS_TYPES_H, HAVE_STDINT_H, and HAVE_STDDEF_H.  The type size
      check automatically includes the available headers, thus supporting
      checks of types defined in the headers.
 
      The following variables may be set before calling this macro to modify
      the way the check is run:
 
        CMAKE_REQUIRED_FLAGS = string of compile command line flags
        CMAKE_REQUIRED_DEFINITIONS = list of macros to define (-DFOO=bar)
        CMAKE_REQUIRED_INCLUDES = list of include directories
        CMAKE_REQUIRED_LIBRARIES = list of libraries to link
        CMAKE_EXTRA_INCLUDE_FILES = list of extra headers to include
 
 
  CheckVariableExists
      Check if the variable exists.
 
        CHECK_VARIABLE_EXISTS(VAR VARIABLE)
       
        VAR      - the name of the variable
        VARIABLE - variable to store the result
 
     
 
      This macro is only for C variables.
 
      The following variables may be set before calling this macro to modify
      the way the check is run:
 
        CMAKE_REQUIRED_FLAGS = string of compile command line flags
        CMAKE_REQUIRED_DEFINITIONS = list of macros to define (-DFOO=bar)
        CMAKE_REQUIRED_LIBRARIES = list of libraries to link
 
 
  Dart
      Configure a project for testing with CTest or old Dart Tcl Client
 
      This file is the backwards-compatibility version of the CTest module.
      It supports using the old Dart 1 Tcl client for driving dashboard
      submissions as well as testing with CTest.  This module should be
      included in the CMakeLists.txt file at the top of a project.  Typical
      usage:
 
        INCLUDE(Dart)
        IF(BUILD_TESTING)
          # ... testing related CMake code ...
        ENDIF(BUILD_TESTING)
 
      The BUILD_TESTING option is created by the Dart module to determine
      whether testing support should be enabled.  The default is ON.
 
  Documentation
      DocumentationVTK.cmake
 
      This file provides support for the VTK documentation framework.  It
      relies on several tools (Doxygen, Perl, etc).
 
  ExternalProject
      Create custom targets to build projects in external trees
 
      The 'ExternalProject_Add' function creates a custom target to drive
      download, update/patch, configure, build, install and test steps of an
      external project:
 
        ExternalProject_Add(<name>    # Name for custom target
          [DEPENDS projects...]      # Targets on which the project depends
          [PREFIX dir]                # Root dir for entire project
          [LIST_SEPARATOR sep]        # Sep to be replaced by ; in cmd lines
          [TMP_DIR dir]              # Directory to store temporary files
          [STAMP_DIR dir]            # Directory to store step timestamps
          #--Download step--------------
          [DOWNLOAD_DIR dir]          # Directory to store downloaded files
          [DOWNLOAD_COMMAND cmd...]  # Command to download source tree
          [CVS_REPOSITORY cvsroot]    # CVSROOT of CVS repository
          [CVS_MODULE mod]            # Module to checkout from CVS repo
          [CVS_TAG tag]              # Tag to checkout from CVS repo
          [SVN_REPOSITORY url]        # URL of Subversion repo
          [SVN_REVISION rev]          # Revision to checkout from Subversion repo
          [SVN_USERNAME john ]        # Username for Subversion checkout and update
          [SVN_PASSWORD doe ]        # Password for Subversion checkout and update
          [GIT_REPOSITORY url]        # URL of git repo
          [GIT_TAG tag]              # Git branch name, commit id or tag
          [URL /.../src.tgz]          # Full path or URL of source
          [URL_MD5 md5]              # MD5 checksum of file at URL
          [TIMEOUT seconds]          # Time allowed for file download operations
          #--Update/Patch step----------
          [UPDATE_COMMAND cmd...]    # Source work-tree update command
          [PATCH_COMMAND cmd...]      # Command to patch downloaded source
          #--Configure step-------------
          [SOURCE_DIR dir]            # Source dir to be used for build
          [CONFIGURE_COMMAND cmd...]  # Build tree configuration command
          [CMAKE_COMMAND /.../cmake]  # Specify alternative cmake executable
          [CMAKE_GENERATOR gen]      # Specify generator for native build
          [CMAKE_ARGS args...]        # Arguments to CMake command line
          #--Build step-----------------
          [BINARY_DIR dir]            # Specify build dir location
          [BUILD_COMMAND cmd...]      # Command to drive the native build
          [BUILD_IN_SOURCE 1]        # Use source dir for build dir
          #--Install step---------------
          [INSTALL_DIR dir]          # Installation prefix
          [INSTALL_COMMAND cmd...]    # Command to drive install after build
          #--Test step---------------
          [TEST_BEFORE_INSTALL 1]    # Add test step executed before install step
          [TEST_AFTER_INSTALL 1]      # Add test step executed after install step
          [TEST_COMMAND cmd...]      # Command to drive test
          )
 
      The *_DIR options specify directories for the project, with default
      directories computed as follows.  If the PREFIX option is given to
      ExternalProject_Add() or the EP_PREFIX directory property is set, then
      an external project is built and installed under the specified prefix:
 
          TMP_DIR      = <prefix>/tmp
          STAMP_DIR    = <prefix>/src/<name>-stamp
          DOWNLOAD_DIR = <prefix>/src
          SOURCE_DIR  = <prefix>/src/<name>
          BINARY_DIR  = <prefix>/src/<name>-build
          INSTALL_DIR  = <prefix>
 
      Otherwise, if the EP_BASE directory property is set then components of
      an external project are stored under the specified base:
 
          TMP_DIR      = <base>/tmp/<name>
          STAMP_DIR    = <base>/Stamp/<name>
          DOWNLOAD_DIR = <base>/Download/<name>
          SOURCE_DIR  = <base>/Source/<name>
          BINARY_DIR  = <base>/Build/<name>
          INSTALL_DIR  = <base>/Install/<name>
 
      If no PREFIX, EP_PREFIX, or EP_BASE is specified then the default is
      to set PREFIX to "<name>-prefix".  Relative paths are interpreted with
      respect to the build directory corresponding to the source directory
      in which ExternalProject_Add is invoked.
 
      If SOURCE_DIR is explicitly set to an existing directory the project
      will be built from it.  Otherwise a download step must be specified
      using one of the DOWNLOAD_COMMAND, CVS_*, SVN_*, or URL options.  The
      URL option may refer locally to a directory or source tarball, or
      refer to a remote tarball (e.g.  http://.../src.tgz).
 
      The 'ExternalProject_Add_Step' function adds a custom step to an
      external project:
 
        ExternalProject_Add_Step(<name> <step> # Names of project and custom step
          [COMMAND cmd...]        # Command line invoked by this step
          [COMMENT "text..."]    # Text printed when step executes
          [DEPENDEES steps...]    # Steps on which this step depends
          [DEPENDERS steps...]    # Steps that depend on this step
          [DEPENDS files...]      # Files on which this step depends
          [ALWAYS 1]              # No stamp file, step always runs
          [WORKING_DIRECTORY dir] # Working directory for command
          )
 
      The command line, comment, and working directory of every standard and
      custom step is processed to replace tokens <SOURCE_DIR>, <BINARY_DIR>,
      <INSTALL_DIR>, and <TMP_DIR> with corresponding property values.
 
      The 'ExternalProject_Get_Property' function retrieves external project
      target properties:
 
        ExternalProject_Get_Property(<name> [prop1 [prop2 [...]]])
 
      It stores property values in variables of the same name.  Property
      names correspond to the keyword argument names of
      'ExternalProject_Add'.
 
  FeatureSummary
      Macros for generating a summary of enabled/disabled features
 
     
 
      PRINT_ENABLED_FEATURES()
 
          Print a summary of all enabled features. By default all successfull
          FIND_PACKAGE() calls will appear here, except the ones which used the
          QUIET keyword. Additional features can be added by appending an entry
          to the global ENABLED_FEATURES property. If SET_FEATURE_INFO() is
          used for that feature, the output will be much more informative.
 
     
 
      PRINT_DISABLED_FEATURES()
 
          Same as PRINT_ENABLED_FEATURES(), but for disabled features. It can
          be extended the same way by adding to the global property
          DISABLED_FEATURES.
 
     
 
      SET_FEATURE_INFO(NAME DESCRIPTION [URL [COMMENT] ] )
 
          Use this macro to set up information about the named feature, which will
          then be displayed by PRINT_ENABLED/DISABLED_FEATURES().
          Example: SET_FEATURE_INFO(LibXml2 "XML processing library."
          "http://xmlsoft.org/")
 
     
 
 
  FindALSA
      Find alsa
 
      Find the alsa libraries (asound)
 
        This module defines the following variables:
            ALSA_FOUND      - True if ALSA_INCLUDE_DIR & ALSA_LIBRARY are found
            ALSA_LIBRARIES  - Set when ALSA_LIBRARY is found
            ALSA_INCLUDE_DIRS - Set when ALSA_INCLUDE_DIR is found
 
     
 
            ALSA_INCLUDE_DIR - where to find asoundlib.h, etc.
            ALSA_LIBRARY    - the asound library
 
     
 
 
  FindASPELL
      Try to find ASPELL
 
      Once done this will define
 
        ASPELL_FOUND - system has ASPELL
        ASPELL_INCLUDE_DIR - the ASPELL include directory
        ASPELL_LIBRARIES - The libraries needed to use ASPELL
        ASPELL_DEFINITIONS - Compiler switches required for using ASPELL
 
 
  FindAVIFile
      Locate AVIFILE library and include paths
 
      AVIFILE (http://avifile.sourceforge.net/)is a set of libraries for
      i386 machines to use various AVI codecs.  Support is limited beyond
      Linux.  Windows provides native AVI support, and so doesn't need this
      library.  This module defines
 
        AVIFILE_INCLUDE_DIR, where to find avifile.h , etc.
        AVIFILE_LIBRARIES, the libraries to link against
        AVIFILE_DEFINITIONS, definitions to use when compiling
        AVIFILE_FOUND, If false, don't try to use AVIFILE
 
 
  FindBISON
      Find bison executable and provides macros to generate custom build
      rules
 
      The module defines the following variables:
 
        BISON_EXECUTABLE - path to the bison program
        BISON_VERSION - version of bison
        BISON_FOUND - true if the program was found
 
     
 
      If bison is found, the module defines the macros:
 
        BISON_TARGET(<Name> <YaccInput> <CodeOutput> [VERBOSE <file>]
                    [COMPILE_FLAGS <string>])
 
      which will create a custom rule to generate a parser.  <YaccInput> is
      the path to a yacc file.  <CodeOutput> is the name of the source file
      generated by bison.  A header file is also be generated, and contains
      the token list.  If COMPILE_FLAGS option is specified, the next
      parameter is added in the bison command line.  if VERBOSE option is
      specified, <file> is created and contains verbose descriptions of the
      grammar and parser.  The macro defines a set of variables:
 
        BISON_${Name}_DEFINED - true is the macro ran successfully
        BISON_${Name}_INPUT - The input source file, an alias for <YaccInput>
        BISON_${Name}_OUTPUT_SOURCE - The source file generated by bison
        BISON_${Name}_OUTPUT_HEADER - The header file generated by bison
        BISON_${Name}_OUTPUTS - The sources files generated by bison
        BISON_${Name}_COMPILE_FLAGS - Options used in the bison command line
 
     
 
        ====================================================================
        Example:
 
     
 
          find_package(BISON)
          BISON_TARGET(MyParser parser.y ${CMAKE_CURRENT_BINARY_DIR}/parser.cpp)
          add_executable(Foo main.cpp ${BISON_MyParser_OUTPUTS})
        ====================================================================
 
 
  FindBLAS
      Find BLAS library
 
      This module finds an installed fortran library that implements the
      BLAS linear-algebra interface (see http://www.netlib.org/blas/).  The
      list of libraries searched for is taken from the autoconf macro file,
      acx_blas.m4 (distributed at
      http://ac-archive.sourceforge.net/ac-archive/acx_blas.html).
 
      This module sets the following variables:
 
        BLAS_FOUND - set to true if a library implementing the BLAS interface
          is found
        BLAS_LINKER_FLAGS - uncached list of required linker flags (excluding -l
          and -L).
        BLAS_LIBRARIES - uncached list of libraries (using full path name) to
          link against to use BLAS
        BLAS95_LIBRARIES - uncached list of libraries (using full path name)
          to link against to use BLAS95 interface
        BLAS95_FOUND - set to true if a library implementing the BLAS f95 interface
          is found
        BLA_STATIC  if set on this determines what kind of linkage we do (static)
        BLA_VENDOR  if set checks only the specified vendor, if not set checks
            all the possibilities
        BLA_F95    if set on tries to find the f95 interfaces for BLAS/LAPACK
 
      ######### ## List of vendors (BLA_VENDOR) valid in this module #
      ATLAS, PhiPACK,CXML,DXML,SunPerf,SCSL,SGIMATH,IBMESSL,Intel10_32
      (intel mkl v10 32 bit),Intel10_64lp (intel mkl v10 64 bit,lp thread
      model, lp64 model), # Intel( older versions of mkl 32 and 64 bit),
      ACML,Apple, NAS, Generic C/CXX should be enabled to use Intel mkl
 
  FindBZip2
      Try to find BZip2
 
      Once done this will define
 
        BZIP2_FOUND - system has BZip2
        BZIP2_INCLUDE_DIR - the BZip2 include directory
        BZIP2_LIBRARIES - Link these to use BZip2
        BZIP2_NEED_PREFIX - this is set if the functions are prefixed with BZ2_
 
 
  FindBoost
      Try to find Boost include dirs and libraries
 
      Usage of this module as follows:
 
      NOTE: Take note of the Boost_ADDITIONAL_VERSIONS variable below.  Due
      to Boost naming conventions and limitations in CMake this find module
      is NOT future safe with respect to Boost version numbers, and may
      break.
 
      == Using Header-Only libraries from within Boost: ==
 
          find_package( Boost 1.36.0 )
          if(Boost_FOUND)
            include_directories(${Boost_INCLUDE_DIRS})
            add_executable(foo foo.cc)
          endif()
 
     
 
     
 
      == Using actual libraries from within Boost: ==
 
          set(Boost_USE_STATIC_LIBS  ON)
          set(Boost_USE_MULTITHREADED ON)
          find_package( Boost 1.36.0 COMPONENTS date_time filesystem system ... )
 
     
 
          if(Boost_FOUND)
            include_directories(${Boost_INCLUDE_DIRS})
            add_executable(foo foo.cc)
            target_link_libraries(foo ${Boost_LIBRARIES})
          endif()
 
     
 
     
 
      The components list needs to contain actual names of boost libraries
      only, such as "date_time" for "libboost_date_time".  If you're using
      parts of Boost that contain header files only (e.g.  foreach) you do
      not need to specify COMPONENTS.
 
      You should provide a minimum version number that should be used.  If
      you provide this version number and specify the REQUIRED attribute,
      this module will fail if it can't find the specified or a later
      version.  If you specify a version number this is automatically put
      into the considered list of version numbers and thus doesn't need to
      be specified in the Boost_ADDITIONAL_VERSIONS variable (see below).
 
      NOTE for Visual Studio Users:
 
            Automatic linking is used on MSVC & Borland compilers by default when
            #including things in Boost.  It's important to note that setting
            Boost_USE_STATIC_LIBS to OFF is NOT enough to get you dynamic linking,
            should you need this feature.  Automatic linking typically uses static
            libraries with a few exceptions (Boost.Python is one).
 
     
 
            Please see the section below near Boost_LIB_DIAGNOSTIC_DEFINITIONS for
            more details.  Adding a TARGET_LINK_LIBRARIES() as shown in the example
            above appears to cause VS to link dynamically if Boost_USE_STATIC_LIBS
            gets set to OFF.  It is suggested you avoid automatic linking since it
            will make your application less portable.
 
     
 
      =========== The mess that is Boost_ADDITIONAL_VERSIONS (sorry?)
      ============
 
      OK, so the Boost_ADDITIONAL_VERSIONS variable can be used to specify a
      list of boost version numbers that should be taken into account when
      searching for Boost.  Unfortunately boost puts the version number into
      the actual filename for the libraries, so this variable will certainly
      be needed in the future when new Boost versions are released.
 
      Currently this module searches for the following version numbers:
      1.33, 1.33.0, 1.33.1, 1.34, 1.34.0, 1.34.1, 1.35, 1.35.0, 1.35.1,
      1.36, 1.36.0, 1.36.1, 1.37, 1.37.0, 1.38, 1.38.0, 1.39, 1.39.0, 1.40,
      1.40.0, 1.41, 1.41.0
 
      NOTE: If you add a new major 1.x version in Boost_ADDITIONAL_VERSIONS
      you should add both 1.x and 1.x.0 as shown above.  Official Boost
      include directories omit the 3rd version number from include paths if
      it is 0 although not all binary Boost releases do so.
 
      SET(Boost_ADDITIONAL_VERSIONS "1.78" "1.78.0" "1.79" "1.79.0")
 
      ===================================== =============
      ========================
 
      Variables used by this module, they can change the default behaviour
      and need to be set before calling find_package:
 
          Boost_USE_MULTITHREADED      Can be set to OFF to use the non-multithreaded
                                      boost libraries.  If not specified, defaults
                                      to ON.
 
     
 
          Boost_USE_STATIC_LIBS        Can be set to ON to force the use of the static
                                      boost libraries. Defaults to OFF.
 
     
 
      Other Variables used by this module which you may want to set.
 
          Boost_ADDITIONAL_VERSIONS    A list of version numbers to use for searching
                                      the boost include directory.  Please see
                                      the documentation above regarding this
                                      annoying, but necessary variable :(
 
     
 
          Boost_DEBUG                  Set this to TRUE to enable debugging output
                                      of FindBoost.cmake if you are having problems.
                                      Please enable this before filing any bug
                                      reports.
 
     
 
          Boost_DETAILED_FAILURE_MSG  FindBoost doesn't output detailed information
                                      about why it failed or how to fix the problem
                                      unless this is set to TRUE or the REQUIRED
                                      keyword is specified in find_package().
                                        [Since CMake 2.8.0]
 
     
 
          Boost_COMPILER              Set this to the compiler suffix used by Boost
                                      (e.g. "-gcc43") if FindBoost has problems finding
                                      the proper Boost installation
 
     
 
      These last three variables are available also as environment
      variables:
 
          BOOST_ROOT or BOOSTROOT      The preferred installation prefix for searching for
                                      Boost.  Set this if the module has problems finding
                                      the proper Boost installation.
 
     
 
          BOOST_INCLUDEDIR            Set this to the include directory of Boost, if the
                                      module has problems finding the proper Boost installation
 
     
 
          BOOST_LIBRARYDIR            Set this to the lib directory of Boost, if the
                                      module has problems finding the proper Boost installation
 
     
 
      Variables defined by this module:
 
          Boost_FOUND                        System has Boost, this means the include dir was
                                              found, as well as all the libraries specified in
                                              the COMPONENTS list.
 
     
 
          Boost_INCLUDE_DIRS                  Boost include directories: not cached
 
     
 
          Boost_INCLUDE_DIR                  This is almost the same as above, but this one is
                                              cached and may be modified by advanced users
 
     
 
          Boost_LIBRARIES                    Link to these to use the Boost libraries that you
                                              specified: not cached
 
     
 
          Boost_LIBRARY_DIRS                  The path to where the Boost library files are.
 
     
 
          Boost_VERSION                      The version number of the boost libraries that
                                              have been found, same as in version.hpp from Boost
 
     
 
          Boost_LIB_VERSION                  The version number in filename form as
                                              it's appended to the library filenames
 
     
 
          Boost_MAJOR_VERSION                major version number of boost
          Boost_MINOR_VERSION                minor version number of boost
          Boost_SUBMINOR_VERSION              subminor version number of boost
 
     
 
          Boost_LIB_DIAGNOSTIC_DEFINITIONS    [WIN32 Only] You can call
                                              add_definitions(${Boost_LIB_DIAGNOSTIC_DEFINITIONS})
                                              to have diagnostic information about Boost's
                                              automatic linking outputted during compilation time.
 
     
 
      For each component you specify in find_package(), the following
      (UPPER-CASE) variables are set.  You can use these variables if you
      would like to pick and choose components for your targets instead of
      just using Boost_LIBRARIES.
 
          Boost_${COMPONENT}_FOUND            True IF the Boost library "component" was found.
 
     
 
          Boost_${COMPONENT}_LIBRARY          Contains the libraries for the specified Boost
                                              "component" (includes debug and optimized keywords
                                              when needed).
 
 
  FindBullet
      Try to find the Bullet physics engine
 
     
 
        This module defines the following variables
 
     
 
        BULLET_FOUND - Was bullet found
        BULLET_INCLUDE_DIRS - the Bullet include directories
        BULLET_LIBRARIES - Link to this, by default it includes
                            all bullet components (Dynamics,
                            Collision, LinearMath, & SoftBody)
 
     
 
        This module accepts the following variables
 
     
 
        BULLET_ROOT - Can be set to bullet install path or Windows build path
 
     
 
 
  FindCABLE
      Find CABLE
 
      This module finds if CABLE is installed and determines where the
      include files and libraries are.  This code sets the following
      variables:
 
        CABLE            the path to the cable executable
        CABLE_TCL_LIBRARY the path to the Tcl wrapper library
        CABLE_INCLUDE_DIR the path to the include directory
 
     
 
      To build Tcl wrappers, you should add shared library and link it to
      ${CABLE_TCL_LIBRARY}.  You should also add ${CABLE_INCLUDE_DIR} as an
      include directory.
 
  FindCUDA
      Tools for building CUDA C files: libraries and build dependencies.
 
      This script locates the NVIDIA CUDA C tools.  It should work on linux,
      windows, and mac and should be reasonably up to date with CUDA C
      releases.
 
      This script makes use of the standard find_package arguments of
      <VERSION>, REQUIRED and QUIET.  CUDA_FOUND will report if an
      acceptable version of CUDA was found.
 
      The script will prompt the user to specify CUDA_TOOLKIT_ROOT_DIR if
      the prefix cannot be determined by the location of nvcc in the system
      path and REQUIRED is specified to find_package().  To use a different
      installed version of the toolkit set the environment variable
      CUDA_BIN_PATH before running cmake (e.g.
      CUDA_BIN_PATH=/usr/local/cuda1.0 instead of the default
      /usr/local/cuda) or set CUDA_TOOLKIT_ROOT_DIR after configuring.  If
      you change the value of CUDA_TOOLKIT_ROOT_DIR, various components that
      depend on the path will be relocated.
 
      It might be necessary to set CUDA_TOOLKIT_ROOT_DIR manually on certain
      platforms, or to use a cuda runtime not installed in the default
      location.  In newer versions of the toolkit the cuda library is
      included with the graphics driver- be sure that the driver version
      matches what is needed by the cuda runtime version.
 
      The following variables affect the behavior of the macros in the
      script (in alphebetical order).  Note that any of these flags can be
      changed multiple times in the same directory before calling
      CUDA_ADD_EXECUTABLE, CUDA_ADD_LIBRARY, CUDA_COMPILE, CUDA_COMPILE_PTX
      or CUDA_WRAP_SRCS.
 
        CUDA_64_BIT_DEVICE_CODE (Default matches host bit size)
        -- Set to ON to compile for 64 bit device code, OFF for 32 bit device code.
            Note that making this different from the host code when generating object
            or C files from CUDA code just won't work, because size_t gets defined by
            nvcc in the generated source.  If you compile to PTX and then load the
            file yourself, you can mix bit sizes between device and host.
 
     
 
        CUDA_ATTACH_VS_BUILD_RULE_TO_CUDA_FILE (Default ON)
        -- Set to ON if you want the custom build rule to be attached to the source
            file in Visual Studio.  Turn OFF if you add the same cuda file to multiple
            targets.
 
     
 
            This allows the user to build the target from the CUDA file; however, bad
            things can happen if the CUDA source file is added to multiple targets.
            When performing parallel builds it is possible for the custom build
            command to be run more than once and in parallel causing cryptic build
            errors.  VS runs the rules for every source file in the target, and a
            source can have only one rule no matter how many projects it is added to.
            When the rule is run from multiple targets race conditions can occur on
            the generated file.  Eventually everything will get built, but if the user
            is unaware of this behavior, there may be confusion.  It would be nice if
            this script could detect the reuse of source files across multiple targets
            and turn the option off for the user, but no good solution could be found.
 
     
 
        CUDA_BUILD_CUBIN (Default OFF)
        -- Set to ON to enable and extra compilation pass with the -cubin option in
            Device mode. The output is parsed and register, shared memory usage is
            printed during build.
 
     
 
        CUDA_BUILD_EMULATION (Default OFF for device mode)
        -- Set to ON for Emulation mode. -D_DEVICEEMU is defined for CUDA C files
            when CUDA_BUILD_EMULATION is TRUE.
 
     
 
        CUDA_GENERATED_OUTPUT_DIR (Default CMAKE_CURRENT_BINARY_DIR)
        -- Set to the path you wish to have the generated files placed.  If it is
            blank output files will be placed in CMAKE_CURRENT_BINARY_DIR.
            Intermediate files will always be placed in
            CMAKE_CURRENT_BINARY_DIR/CMakeFiles.
 
     
 
        CUDA_HOST_COMPILATION_CPP (Default ON)
        -- Set to OFF for C compilation of host code.
 
     
 
        CUDA_NVCC_FLAGS
        CUDA_NVCC_FLAGS_<CONFIG>
        -- Additional NVCC command line arguments.  NOTE: multiple arguments must be
            semi-colon delimited (e.g. --compiler-options;-Wall)
 
     
 
        CUDA_PROPAGATE_HOST_FLAGS (Default ON)
        -- Set to ON to propagate CMAKE_{C,CXX}_FLAGS and their configuration
            dependent counterparts (e.g. CMAKE_C_FLAGS_DEBUG) automatically to the
            host compiler through nvcc's -Xcompiler flag.  This helps make the
            generated host code match the rest of the system better.  Sometimes
            certain flags give nvcc problems, and this will help you turn the flag
            propagation off.  This does not affect the flags supplied directly to nvcc
            via CUDA_NVCC_FLAGS or through the OPTION flags specified through
            CUDA_ADD_LIBRARY, CUDA_ADD_EXECUTABLE, or CUDA_WRAP_SRCS.  Flags used for
            shared library compilation are not affected by this flag.
 
     
 
        CUDA_VERBOSE_BUILD (Default OFF)
        -- Set to ON to see all the commands used when building the CUDA file.  When
            using a Makefile generator the value defaults to VERBOSE (run make
            VERBOSE=1 to see output), although setting CUDA_VERBOSE_BUILD to ON will
            always print the output.
 
     
 
      The script creates the following macros (in alphebetical order):
 
        CUDA_ADD_CUFFT_TO_TARGET( cuda_target )
        -- Adds the cufft library to the target (can be any target).  Handles whether
            you are in emulation mode or not.
 
     
 
        CUDA_ADD_CUBLAS_TO_TARGET( cuda_target )
        -- Adds the cublas library to the target (can be any target).  Handles
            whether you are in emulation mode or not.
 
     
 
        CUDA_ADD_EXECUTABLE( cuda_target file0 file1 ...
                              [WIN32] [MACOSX_BUNDLE] [EXCLUDE_FROM_ALL] [OPTIONS ...] )
        -- Creates an executable "cuda_target" which is made up of the files
            specified.  All of the non CUDA C files are compiled using the standard
            build rules specified by CMAKE and the cuda files are compiled to object
            files using nvcc and the host compiler.  In addition CUDA_INCLUDE_DIRS is
            added automatically to include_directories().  Some standard CMake target
            calls can be used on the target after calling this macro
            (e.g. set_target_properties and target_link_libraries), but setting
            properties that adjust compilation flags will not affect code compiled by
            nvcc.  Such flags should be modified before calling CUDA_ADD_EXECUTABLE,
            CUDA_ADD_LIBRARY or CUDA_WRAP_SRCS.
 
     
 
        CUDA_ADD_LIBRARY( cuda_target file0 file1 ...
                          [STATIC | SHARED | MODULE] [EXCLUDE_FROM_ALL] [OPTIONS ...] )
        -- Same as CUDA_ADD_EXECUTABLE except that a library is created.
 
     
 
        CUDA_BUILD_CLEAN_TARGET()
        -- Creates a convience target that deletes all the dependency files
            generated.  You should make clean after running this target to ensure the
            dependency files get regenerated.
 
     
 
        CUDA_COMPILE( generated_files file0 file1 ... [STATIC | SHARED | MODULE]
                      [OPTIONS ...] )
        -- Returns a list of generated files from the input source files to be used
            with ADD_LIBRARY or ADD_EXECUTABLE.
 
     
 
        CUDA_COMPILE_PTX( generated_files file0 file1 ... [OPTIONS ...] )
        -- Returns a list of PTX files generated from the input source files.
 
     
 
        CUDA_INCLUDE_DIRECTORIES( path0 path1 ... )
        -- Sets the directories that should be passed to nvcc
            (e.g. nvcc -Ipath0 -Ipath1 ... ). These paths usually contain other .cu
            files.
 
     
 
        CUDA_WRAP_SRCS ( cuda_target format generated_files file0 file1 ...
                          [STATIC | SHARED | MODULE] [OPTIONS ...] )
        -- This is where all the magic happens.  CUDA_ADD_EXECUTABLE,
            CUDA_ADD_LIBRARY, CUDA_COMPILE, and CUDA_COMPILE_PTX all call this
            function under the hood.
 
     
 
            Given the list of files (file0 file1 ... fileN) this macro generates
            custom commands that generate either PTX or linkable objects (use "PTX" or
            "OBJ" for the format argument to switch).  Files that don't end with .cu
            or have the HEADER_FILE_ONLY property are ignored.
 
     
 
            The arguments passed in after OPTIONS are extra command line options to
            give to nvcc.  You can also specify per configuration options by
            specifying the name of the configuration followed by the options.  General
            options must preceed configuration specific options.  Not all
            configurations need to be specified, only the ones provided will be used.
 
     
 
              OPTIONS -DFLAG=2 "-DFLAG_OTHER=space in flag"
              DEBUG -g
              RELEASE --use_fast_math
              RELWITHDEBINFO --use_fast_math;-g
              MINSIZEREL --use_fast_math
 
     
 
            For certain configurations (namely VS generating object files with
            CUDA_ATTACH_VS_BUILD_RULE_TO_CUDA_FILE set to ON), no generated file will
            be produced for the given cuda file.  This is because when you add the
            cuda file to Visual Studio it knows that this file produces an object file
            and will link in the resulting object file automatically.
 
     
 
            This script will also generate a separate cmake script that is used at
            build time to invoke nvcc.  This is for serveral reasons.
 
     
 
              1. nvcc can return negative numbers as return values which confuses
              Visual Studio into thinking that the command succeeded.  The script now
              checks the error codes and produces errors when there was a problem.
 
     
 
              2. nvcc has been known to not delete incomplete results when it
              encounters problems.  This confuses build systems into thinking the
              target was generated when in fact an unusable file exists.  The script
              now deletes the output files if there was an error.
 
     
 
              3. By putting all the options that affect the build into a file and then
              make the build rule dependent on the file, the output files will be
              regenerated when the options change.
 
     
 
            This script also looks at optional arguments STATIC, SHARED, or MODULE to
            determine when to target the object compilation for a shared library.
            BUILD_SHARED_LIBS is ignored in CUDA_WRAP_SRCS, but it is respected in
            CUDA_ADD_LIBRARY.  On some systems special flags are added for building
            objects intended for shared libraries.  A preprocessor macro,
            <target_name>_EXPORTS is defined when a shared library compilation is
            detected.
 
     
 
            Flags passed into add_definitions with -D or /D are passed along to nvcc.
 
     
 
      The script defines the following variables:
 
        CUDA_VERSION_MAJOR    -- The major version of cuda as reported by nvcc.
        CUDA_VERSION_MINOR    -- The minor version.
        CUDA_VERSION
        CUDA_VERSION_STRING  -- CUDA_VERSION_MAJOR.CUDA_VERSION_MINOR
 
     
 
        CUDA_TOOLKIT_ROOT_DIR -- Path to the CUDA Toolkit (defined if not set).
        CUDA_SDK_ROOT_DIR    -- Path to the CUDA SDK.  Use this to find files in the
                                  SDK.  This script will not directly support finding
                                  specific libraries or headers, as that isn't
                                  supported by NVIDIA.  If you want to change
                                  libraries when the path changes see the
                                  FindCUDA.cmake script for an example of how to clear
                                  these variables.  There are also examples of how to
                                  use the CUDA_SDK_ROOT_DIR to locate headers or
                                  libraries, if you so choose (at your own risk).
        CUDA_INCLUDE_DIRS    -- Include directory for cuda headers.  Added automatically
                                  for CUDA_ADD_EXECUTABLE and CUDA_ADD_LIBRARY.
        CUDA_LIBRARIES        -- Cuda RT library.
        CUDA_CUFFT_LIBRARIES  -- Device or emulation library for the Cuda FFT
                                  implementation (alternative to:
                                  CUDA_ADD_CUFFT_TO_TARGET macro)
        CUDA_CUBLAS_LIBRARIES -- Device or emulation library for the Cuda BLAS
                                  implementation (alterative to:
                                  CUDA_ADD_CUBLAS_TO_TARGET macro).
 
     
 
     
 
        James Bigler, NVIDIA Corp (nvidia.com - jbigler)
        Abe Stephens, SCI Institute -- http://www.sci.utah.edu/~abe/FindCuda.html
 
     
 
        Copyright (c) 2008 - 2009 NVIDIA Corporation.  All rights reserved.
 
     
 
        Copyright (c) 2007-2009
        Scientific Computing and Imaging Institute, University of Utah
 
     
 
        This code is licensed under the MIT License.  See the FindCUDA.cmake script
        for the text of the license.
 
 
  FindCURL
      Find curl
 
      Find the native CURL headers and libraries.
 
        CURL_INCLUDE_DIRS - where to find curl/curl.h, etc.
        CURL_LIBRARIES    - List of libraries when using curl.
        CURL_FOUND        - True if curl found.
 
 
  FindCVS
       
 
      The module defines the following variables:
 
          CVS_EXECUTABLE - path to cvs command line client
          CVS_FOUND - true if the command line client was found
 
      Example usage:
 
          find_package(CVS)
          if(CVS_FOUND)
            message("CVS found: ${CVS_EXECUTABLE}")
          endif(CVS_FOUND)
 
 
  FindCoin3D
      Find Coin3D (Open Inventor)
 
      Coin3D is an implementation of the Open Inventor API.  It provides
      data structures and algorithms for 3D visualization
      http://www.coin3d.org/
 
      This module defines the following variables
 
        COIN3D_FOUND        - system has Coin3D - Open Inventor
        COIN3D_INCLUDE_DIRS  - where the Inventor include directory can be found
        COIN3D_LIBRARIES    - Link to this to use Coin3D
 
     
 
 
  FindCups
      Try to find the Cups printing system
 
      Once done this will define
 
        CUPS_FOUND - system has Cups
        CUPS_INCLUDE_DIR - the Cups include directory
        CUPS_LIBRARIES - Libraries needed to use Cups
        Set CUPS_REQUIRE_IPP_DELETE_ATTRIBUTE to TRUE if you need a version which
        features this function (i.e. at least 1.1.19)
 
 
  FindCurses
      Find the curses include file and library
 
     
 
        CURSES_FOUND - system has Curses
        CURSES_INCLUDE_DIR - the Curses include directory
        CURSES_LIBRARIES - The libraries needed to use Curses
        CURSES_HAVE_CURSES_H - true if curses.h is available
        CURSES_HAVE_NCURSES_H - true if ncurses.h is available
        CURSES_HAVE_NCURSES_NCURSES_H - true if ncurses/ncurses.h is available
        CURSES_HAVE_NCURSES_CURSES_H - true if ncurses/curses.h is available
        CURSES_LIBRARY - set for backwards compatibility with 2.4 CMake
 
     
 
      Set CURSES_NEED_NCURSES to TRUE before the FIND_PACKAGE() command if
      NCurses functionality is required.
 
  FindCxxTest
      Find CxxTest
 
      Find the CxxTest suite and declare a helper macro for creating unit
      tests and integrating them with CTest.  For more details on CxxTest
      see http://cxxtest.tigris.org
 
      INPUT Variables
 
          CXXTEST_USE_PYTHON
              If true, the CXXTEST_ADD_TEST macro will use
              the Python test generator instead of Perl.
 
     
 
      OUTPUT Variables
 
          CXXTEST_FOUND
              True if the CxxTest framework was found
          CXXTEST_INCLUDE_DIR
              Where to find the CxxTest include directory
          CXXTEST_PERL_TESTGEN_EXECUTABLE
              The perl-based test generator.
          CXXTEST_PYTHON_TESTGEN_EXECUTABLE
              The python-based test generator.
 
     
 
      MACROS for optional use by CMake users:
 
          CXXTEST_ADD_TEST(<test_name> <gen_source_file> <input_files_to_testgen...>)
              Creates a CxxTest runner and adds it to the CTest testing suite
              Parameters:
                  test_name              The name of the test
                  gen_source_file        The generated source filename to be generated by CxxTest
                  input_files_to_testgen  The list of header files containing the
                                          CxxTest::TestSuite's to be included in this runner
                 
              #==============
              Example Usage:
 
     
 
                  find_package(CxxTest)
                  if(CXXTEST_FOUND)
                      include_directories(${CXXTEST_INCLUDE_DIR})
                      enable_testing()
 
     
 
                      CXXTEST_ADD_TEST(unittest_foo foo_test.cc
                                        ${CMAKE_CURRENT_SOURCE_DIR}/foo_test.h)
                      target_link_libraries(unittest_foo foo) # as needed
                  endif()
 
     
 
                    This will (if CxxTest is found):
                    1. Invoke the testgen executable to autogenerate foo_test.cc in the
                        binary tree from "foo_test.h" in the current source directory.
                    2. Create an executable and test called unittest_foo.
                     
            #=============
            Example foo_test.h:
 
     
 
                #include <cxxtest/TestSuite.h>
               
                class MyTestSuite : public CxxTest::TestSuite
                {
                public:
                    void testAddition( void )
                    {
                      TS_ASSERT( 1 + 1 > 1 );
                      TS_ASSERT_EQUALS( 1 + 1, 2 );
                    }
                };
 
     
 
 
  FindCygwin
      this module looks for Cygwin
 
     
 
 
  FindDCMTK
      find DCMTK libraries and applications
 
     
 
 
  FindDart
      Find DART
 
      This module looks for the dart testing software and sets DART_ROOT to
      point to where it found it.
 
 
  FindDevIL
       
 
      This module locates the developer's image library.
      http://openil.sourceforge.net/
 
      This module sets: IL_LIBRARIES the name of the IL library.  These
      include the full path to the core DevIL library.  This one has to be
      linked into the application.  ILU_LIBRARIES the name of the ILU
      library.  Again, the full path.  This library is for filters and
      effects, not actual loading.  It doesn't have to be linked if the
      functionality it provides is not used.  ILUT_LIBRARIES the name of the
      ILUT library.  Full path.  This part of the library interfaces with
      OpenGL.  It is not strictly needed in applications.  IL_INCLUDE_DIR
      where to find the il.h, ilu.h and ilut.h files.  IL_FOUND this is set
      to TRUE if all the above variables were set.  This will be set to
      false if ILU or ILUT are not found, even if they are not needed.  In
      most systems, if one library is found all the others are as well.
      That's the way the DevIL developers release it.
 
  FindDoxygen
      This module looks for Doxygen and the path to Graphviz's dot
 
      Doxygen is a documentation generation tool.  Please see
      http://www.doxygen.org
 
      This module accepts the following optional variables:
 
          DOXYGEN_SKIP_DOT      = If true this module will skip trying to find Dot
                                  (an optional component often used by Doxygen)
 
     
 
      This modules defines the following variables:
 
          DOXYGEN_EXECUTABLE    = The path to the doxygen command.
          DOXYGEN_FOUND          = Was Doxygen found or not?
 
     
 
          DOXYGEN_DOT_EXECUTABLE = The path to the dot program used by doxygen.
          DOXYGEN_DOT_FOUND      = Was Dot found or not?
          DOXYGEN_DOT_PATH      = The path to dot not including the executable
 
     
 
     
 
 
  FindEXPAT
      Find expat
 
      Find the native EXPAT headers and libraries.
 
        EXPAT_INCLUDE_DIRS - where to find expat.h, etc.
        EXPAT_LIBRARIES    - List of libraries when using expat.
        EXPAT_FOUND        - True if expat found.
 
 
  FindFLEX
      Find flex executable and provides a macro to generate custom build
      rules
 
     
 
      The module defines the following variables:
 
        FLEX_FOUND - true is flex executable is found
        FLEX_EXECUTABLE - the path to the flex executable
        FLEX_VERSION - the version of flex
        FLEX_LIBRARIES - The flex libraries
 
     
 
      If flex is found on the system, the module provides the macro:
 
        FLEX_TARGET(Name FlexInput FlexOutput [COMPILE_FLAGS <string>])
 
      which creates a custom command to generate the <FlexOutput> file from
      the <FlexInput> file.  If COMPILE_FLAGS option is specified, the next
      parameter is added to the flex command line.  Name is an alias used to
      get details of this custom command.  Indeed the macro defines the
      following variables:
 
        FLEX_${Name}_DEFINED - true is the macro ran successfully
        FLEX_${Name}_OUTPUTS - the source file generated by the custom rule, an
        alias for FlexOutput
        FLEX_${Name}_INPUT - the flex source file, an alias for ${FlexInput}
 
     
 
      Flex scanners oftenly use tokens defined by Bison: the code generated
      by Flex depends of the header generated by Bison.  This module also
      defines a macro:
 
        ADD_FLEX_BISON_DEPENDENCY(FlexTarget BisonTarget)
 
      which adds the required dependency between a scanner and a parser
      where <FlexTarget> and <BisonTarget> are the first parameters of
      respectively FLEX_TARGET and BISON_TARGET macros.
 
        ====================================================================
        Example:
 
     
 
          find_package(BISON)
          find_package(FLEX)
 
     
 
          BISON_TARGET(MyParser parser.y ${CMAKE_CURRENT_BINARY_DIR}/parser.cpp
          FLEX_TARGET(MyScanner lexer.l  ${CMAKE_CURRENT_BIANRY_DIR}/lexer.cpp)
          ADD_FLEX_BISON_DEPENDENCY(MyScanner MyParser)
 
     
 
          include_directories(${CMAKE_CURRENT_BINARY_DIR})
          add_executable(Foo
            Foo.cc
            ${BISON_MyParser_OUTPUTS}
            ${FLEX_MyScanner_OUTPUTS}
          )
        ====================================================================
 
 
  FindFLTK
      Find the native FLTK includes and library
 
     
 
      By default FindFLTK.cmake will search for all of the FLTK components
      and add them to the FLTK_LIBRARIES variable.
 
          You can limit the components which get placed in FLTK_LIBRARIES by
          defining one or more of the following three options:
 
     
 
            FLTK_SKIP_OPENGL, set to true to disable searching for opengl and
                              the FLTK GL library
            FLTK_SKIP_FORMS, set to true to disable searching for fltk_forms
            FLTK_SKIP_IMAGES, set to true to disable searching for fltk_images
 
     
 
            FLTK_SKIP_FLUID, set to true if the fluid binary need not be present
                            at build time
 
     
 
      The following variables will be defined:
 
            FLTK_FOUND, True if all components not skipped were found
            FLTK_INCLUDE_DIR, where to find include files
            FLTK_LIBRARIES, list of fltk libraries you should link against
            FLTK_FLUID_EXECUTABLE, where to find the Fluid tool
            FLTK_WRAP_UI, This enables the FLTK_WRAP_UI command
 
     
 
      The following cache variables are assigned but should not be used.
      See the FLTK_LIBRARIES variable instead.
 
            FLTK_BASE_LIBRARY  = the full path to fltk.lib
            FLTK_GL_LIBRARY    = the full path to fltk_gl.lib
            FLTK_FORMS_LIBRARY  = the full path to fltk_forms.lib
            FLTK_IMAGES_LIBRARY = the full path to fltk_images.lib
 
 
  FindFLTK2
      Find the native FLTK2 includes and library
 
      The following settings are defined
 
        FLTK2_FLUID_EXECUTABLE, where to find the Fluid tool
        FLTK2_WRAP_UI, This enables the FLTK2_WRAP_UI command
        FLTK2_INCLUDE_DIR, where to find include files
        FLTK2_LIBRARIES, list of fltk2 libraries
        FLTK2_FOUND, Don't use FLTK2 if false.
 
      The following settings should not be used in general.
 
        FLTK2_BASE_LIBRARY  = the full path to fltk2.lib
        FLTK2_GL_LIBRARY    = the full path to fltk2_gl.lib
        FLTK2_IMAGES_LIBRARY = the full path to fltk2_images.lib
 
 
  FindFreetype
      Locate FreeType library
 
      This module defines
 
        FREETYPE_LIBRARIES, the library to link against
        FREETYPE_FOUND, if false, do not try to link to FREETYPE
        FREETYPE_INCLUDE_DIRS, where to find headers.
        This is the concatenation of the paths:
        FREETYPE_INCLUDE_DIR_ft2build
        FREETYPE_INCLUDE_DIR_freetype2
 
     
 
      $FREETYPE_DIR is an environment variable that would correspond to the
      ./configure --prefix=$FREETYPE_DIR used in building FREETYPE.
 
  FindGCCXML
      Find the GCC-XML front-end executable.
 
     
 
      This module will define the following variables:
 
        GCCXML - the GCC-XML front-end executable.
 
 
  FindGDAL
       
 
      Locate gdal
 
      This module accepts the following environment variables:
 
          GDAL_DIR or GDAL_ROOT - Specify the location of GDAL
 
     
 
      This module defines the following CMake variables:
 
          GDAL_FOUND - True if libgdal is found
          GDAL_LIBRARY - A variable pointing to the GDAL library
          GDAL_INCLUDE_DIR - Where to find the headers
 
 
  FindGIF
       
 
      This module defines GIF_LIBRARIES - libraries to link to in order to
      use GIF GIF_FOUND, if false, do not try to link GIF_INCLUDE_DIR, where
      to find the headers
 
      $GIF_DIR is an environment variable that would correspond to the
      ./configure --prefix=$GIF_DIR
 
  FindGLUT
      try to find glut library and include files
 
        GLUT_INCLUDE_DIR, where to find GL/glut.h, etc.
        GLUT_LIBRARIES, the libraries to link against
        GLUT_FOUND, If false, do not try to use GLUT.
 
      Also defined, but not for general use are:
 
        GLUT_glut_LIBRARY = the full path to the glut library.
        GLUT_Xmu_LIBRARY  = the full path to the Xmu library.
        GLUT_Xi_LIBRARY  = the full path to the Xi Library.
 
 
  FindGTK
      try to find GTK (and glib) and GTKGLArea
 
        GTK_INCLUDE_DIR  - Directories to include to use GTK
        GTK_LIBRARIES    - Files to link against to use GTK
        GTK_FOUND        - GTK was found
        GTK_GL_FOUND      - GTK's GL features were found
 
 
  FindGTK2
      FindGTK2.cmake
 
      This module can find the GTK2 widget libraries and several of its
      other optional components like gtkmm, glade, and glademm.
 
      NOTE: If you intend to use version checking, CMake 2.6.2 or later is
 
              required.
 
     
 
      Specify one or more of the following components as you call this find
      module.  See example below.
 
          gtk
          gtkmm
          glade
          glademm
 
     
 
      The following variables will be defined for your use
 
          GTK2_FOUND - Were all of your specified components found?
          GTK2_INCLUDE_DIRS - All include directories
          GTK2_LIBRARIES - All libraries
 
     
 
          GTK2_VERSION - The version of GTK2 found (x.y.z)
          GTK2_MAJOR_VERSION - The major version of GTK2
          GTK2_MINOR_VERSION - The minor version of GTK2
          GTK2_PATCH_VERSION - The patch version of GTK2
 
     
 
      Optional variables you can define prior to calling this module:
 
          GTK2_DEBUG - Enables verbose debugging of the module
          GTK2_SKIP_MARK_AS_ADVANCED - Disable marking cache variables as advanced
 
     
 
      ================= Example Usage:
 
          Call find_package() once, here are some examples to pick from:
 
     
 
          Require GTK 2.6 or later
              find_package(GTK2 2.6 REQUIRED gtk)
 
     
 
          Require GTK 2.10 or later and Glade
              find_package(GTK2 2.10 REQUIRED gtk glade)
 
     
 
          Search for GTK/GTKMM 2.8 or later
              find_package(GTK2 2.8 COMPONENTS gtk gtkmm)
 
     
 
          if(GTK2_FOUND)
            include_directories(${GTK2_INCLUDE_DIRS})
            add_executable(mygui mygui.cc)
            target_link_libraries(mygui ${GTK2_LIBRARIES})
          endif()
 
     
 
 
  FindGTest
      --------------------
 
      Locate the Google C++ Testing Framework.
 
      Defines the following variables:
 
          GTEST_FOUND - Found the Google Testing framework
          GTEST_INCLUDE_DIRS - Include directories
 
     
 
      Also defines the library variables below as normal variables.  These
      contain debug/optimized keywords when a debugging library is found.
 
          GTEST_BOTH_LIBRARIES - Both libgtest & libgtest-main
          GTEST_LIBRARIES - libgtest
          GTEST_MAIN_LIBRARIES - libgtest-main
 
     
 
      Accepts the following variables as input:
 
          GTEST_ROOT - (as a CMake or environment variable)
                      The root directory of the gtest install prefix
 
     
 
          GTEST_MSVC_SEARCH - If compiling with MSVC, this variable can be set to
                              "MD" or "MT" to enable searching a GTest build tree
                              (defaults: "MD")
 
     
 
      Example Usage:
 
          enable_testing()
          find_package(GTest REQUIRED)
          include_directories(${GTEST_INCLUDE_DIRS})
 
     
 
          add_executable(foo foo.cc)
          target_link_libraries(foo ${GTEST_BOTH_LIBRARIES})
 
     
 
          add_test(AllTestsInFoo foo)
 
     
 
     
 
      If you would like each Google test to show up in CTest as a test you
      may use the following macro.  NOTE: It will slow down your tests by
      running an executable for each test and test fixture.  You will also
      have to rerun CMake after adding or removing tests or test fixtures.
 
      GTEST_ADD_TESTS(executable extra_args ARGN)
 
          executable = The path to the test executable
          extra_args = Pass a list of extra arguments to be passed to
                        executable enclosed in quotes (or "" for none)
          ARGN =      A list of source files to search for tests & test
                        fixtures.
 
     
 
        Example:
            set(FooTestArgs --foo 1 --bar 2)
            add_executable(FooTest FooUnitTest.cc)
            GTEST_ADD_TESTS(FooTest "${FooTestArgs}" FooUnitTest.cc)
 
 
  FindGettext
      Find GNU gettext tools
 
      This module looks for the GNU gettext tools.  This module defines the
      following values:
 
        GETTEXT_MSGMERGE_EXECUTABLE: the full path to the msgmerge tool.
        GETTEXT_MSGFMT_EXECUTABLE: the full path to the msgfmt tool.
        GETTEXT_FOUND: True if gettext has been found.
 
     
 
      Additionally it provides the following macros:
      GETTEXT_CREATE_TRANSLATIONS ( outputFile [ALL] file1 ...  fileN )
 
          This will create a target "translations" which will convert the
          given input po files into the binary output mo file. If the
          ALL option is used, the translations will also be created when
          building the default target.
 
 
  FindGit
       
 
      The module defines the following variables:
 
          GIT_EXECUTABLE - path to git command line client
          GIT_FOUND - true if the command line client was found
 
      Example usage:
 
          find_package(Git)
          if(GIT_FOUND)
            message("git found: ${GIT_EXECUTABLE}")
          endif()
 
 
  FindGnuTLS
      Try to find the GNU Transport Layer Security library (gnutls)
 
     
 
      Once done this will define
 
        GNUTLS_FOUND - System has gnutls
        GNUTLS_INCLUDE_DIR - The gnutls include directory
        GNUTLS_LIBRARIES - The libraries needed to use gnutls
        GNUTLS_DEFINITIONS - Compiler switches required for using gnutls
 
 
  FindGnuplot
      this module looks for gnuplot
 
     
 
      Once done this will define
 
        GNUPLOT_FOUND - system has Gnuplot
        GNUPLOT_EXECUTABLE - the Gnuplot executable
 
 
  FindHDF5
      Find HDF5, a library for reading and writing self describing array
      data.
 
     
 
      This module invokes the HDF5 wrapper compiler that should be installed
      alongside HDF5.  Depending upon the HDF5 Configuration, the wrapper
      compiler is called either h5cc or h5pcc.  If this succeeds, the module
      will then call the compiler with the -show argument to see what flags
      are used when compiling an HDF5 client application.
 
      The module will optionally accept the COMPONENTS argument.  If no
      COMPONENTS are specified, then the find module will default to finding
      only the HDF5 C library.  If one or more COMPONENTS are specified, the
      module will attempt to find the language bindings for the specified
      components.  Currently, the only valid components are C and CXX.  The
      module does not yet support finding the Fortran bindings.  If the
      COMPONENTS argument is not given, the module will attempt to find only
      the C bindings.
 
      On UNIX systems, this module will read the variable
      HDF5_USE_STATIC_LIBRARIES to determine whether or not to prefer a
      static link to a dynamic link for HDF5 and all of it's dependencies.
      To use this feature, make sure that the HDF5_USE_STATIC_LIBRARIES
      variable is set before the call to find_package.
 
      To provide the module with a hint about where to find your HDF5
      installation, you can set the environment variable HDF5_ROOT.  The
      Find module will then look in this path when searching for HDF5
      executables, paths, and libraries.
 
      In addition to finding the includes and libraries required to compile
      an HDF5 client application, this module also makes an effort to find
      tools that come with the HDF5 distribution that may be useful for
      regression testing.
 
      This module will define the following variables:
 
        HDF5_INCLUDE_DIRS - Location of the hdf5 includes
        HDF5_INCLUDE_DIR - Location of the hdf5 includes (deprecated)
        HDF5_DEFINITIONS - Required compiler definitions for HDF5
        HDF5_C_LIBRARIES - Required libraries for the HDF5 C bindings.
        HDF5_CXX_LIBRARIES - Required libraries for the HDF5 C++ bindings
        HDF5_LIBRARIES - Required libraries for all requested bindings
        HDF5_FOUND - true if HDF5 was found on the system
        HDF5_LIBRARY_DIRS - the full set of library directories
        HDF5_IS_PARALLEL - Whether or not HDF5 was found with parallel IO support
        HDF5_C_COMPILER_EXECUTABLE - the path to the HDF5 C wrapper compiler
        HDF5_CXX_COMPILER_EXECUTABLE - the path to the HDF5 C++ wrapper compiler
        HDF5_DIFF_EXECUTABLE - the path to the HDF5 dataset comparison tool
 
 
  FindHSPELL
      Try to find Hspell
 
      Once done this will define
 
        HSPELL_FOUND - system has Hspell
        HSPELL_INCLUDE_DIR - the Hspell include directory
        HSPELL_LIBRARIES - The libraries needed to use Hspell
        HSPELL_DEFINITIONS - Compiler switches required for using Hspell
 
     
 
        HSPELL_VERSION_STRING - The version of Hspell found (x.y)
        HSPELL_MAJOR_VERSION  - the major version of Hspell
        HSPELL_MINOR_VERSION  - The minor version of Hspell
 
 
  FindHTMLHelp
      This module looks for Microsoft HTML Help Compiler
 
      It defines:
 
          HTML_HELP_COMPILER    : full path to the Compiler (hhc.exe)
          HTML_HELP_INCLUDE_PATH : include path to the API (htmlhelp.h)
          HTML_HELP_LIBRARY      : full path to the library (htmlhelp.lib)
 
     
 
 
  FindITK
      Find an ITK installation or build tree.
 
  FindImageMagick
      Find the ImageMagick binary suite.
 
      This module will search for a set of ImageMagick tools specified as
      components in the FIND_PACKAGE call.  Typical components include, but
      are not limited to (future versions of ImageMagick might have
      additional components not listed here):
 
        animate
        compare
        composite
        conjure
        convert
        display
        identify
        import
        mogrify
        montage
        stream
 
     
 
      If no component is specified in the FIND_PACKAGE call, then it only
      searches for the ImageMagick executable directory.  This code defines
      the following variables:
 
        ImageMagick_FOUND                  - TRUE if all components are found.
        ImageMagick_EXECUTABLE_DIR        - Full path to executables directory.
        ImageMagick_<component>_FOUND      - TRUE if <component> is found.
        ImageMagick_<component>_EXECUTABLE - Full path to <component> executable.
 
     
 
      There are also components for the following ImageMagick APIs:
 
        Magick++
        MagickWand
        MagickCore
 
     
 
      For these components the following variables are set:
 
        ImageMagick_FOUND                    - TRUE if all components are found.
        ImageMagick_INCLUDE_DIRS            - Full paths to all include dirs.
        ImageMagick_LIBRARIES                - Full paths to all libraries.
        ImageMagick_<component>_FOUND        - TRUE if <component> is found.
        ImageMagick_<component>_INCLUDE_DIRS - Full path to <component> include dirs.
        ImageMagick_<component>_LIBRARIES    - Full path to <component> libraries.
 
     
 
      Example Usages:
 
        FIND_PACKAGE(ImageMagick)
        FIND_PACKAGE(ImageMagick COMPONENTS convert)
        FIND_PACKAGE(ImageMagick COMPONENTS convert mogrify display)
        FIND_PACKAGE(ImageMagick COMPONENTS Magick++)
        FIND_PACKAGE(ImageMagick COMPONENTS Magick++ convert)
 
     
 
      Note that the standard FIND_PACKAGE features are supported (i.e.,
      QUIET, REQUIRED, etc.).
 
  FindJNI
      Find JNI java libraries.
 
      This module finds if Java is installed and determines where the
      include files and libraries are.  It also determines what the name of
      the library is.  This code sets the following variables:
 
         
        JNI_INCLUDE_DIRS      = the include dirs to use
        JNI_LIBRARIES        = the libraries to use
        JNI_FOUND            = TRUE if JNI headers and libraries were found.
        JAVA_AWT_LIBRARY      = the path to the jawt library
        JAVA_JVM_LIBRARY      = the path to the jvm library
        JAVA_INCLUDE_PATH    = the include path to jni.h
        JAVA_INCLUDE_PATH2    = the include path to jni_md.h
        JAVA_AWT_INCLUDE_PATH = the include path to jawt.h
 
     
 
 
  FindJPEG
      Find JPEG
 
      Find the native JPEG includes and library This module defines
 
        JPEG_INCLUDE_DIR, where to find jpeglib.h, etc.
        JPEG_LIBRARIES, the libraries needed to use JPEG.
        JPEG_FOUND, If false, do not try to use JPEG.
 
      also defined, but not for general use are
 
        JPEG_LIBRARY, where to find the JPEG library.
 
 
  FindJasper
      Try to find the Jasper JPEG2000 library
 
      Once done this will define
 
        JASPER_FOUND - system has Jasper
        JASPER_INCLUDE_DIR - the Jasper include directory
        JASPER_LIBRARIES - The libraries needed to use Jasper
 
 
  FindJava
      Find Java
 
      This module finds if Java is installed and determines where the
      include files and libraries are.  This code sets the following
      variables:
 
        Java_JAVA_EXECUTABLE    = the full path to the Java runtime
        Java_JAVAC_EXECUTABLE  = the full path to the Java compiler
        Java_JAR_EXECUTABLE    = the full path to the Java archiver
        Java_VERSION_STRING    = Version of the package found (java version), eg. 1.6.0_12
        Java_VERSION_MAJOR      = The major version of the package found.
        Java_VERSION_MINOR      = The minor version of the package found.
        Java_VERSION_PATCH      = The patch version of the package found.
        Java_VERSION_TWEAK      = The tweak version of the package found (after '_')
        Java_VERSION            = This is set to: $major.$minor.$patch(.$tweak)
 
     
 
      NOTE: ${Java_VERSION} and ${Java_VERSION_STRING} are not guaranteed to
      be identical.  For example some java version may return:
      Java_VERSION_STRING = 1.5.0_17 and Java_VERSION = 1.5.0.17
 
      another example is the Java OEM, with: Java_VERSION_STRING = 1.6.0-oem
      and Java_VERSION = 1.6.0
 
      For these components the following variables are set:
 
        Java_FOUND                    - TRUE if all components are found.
        Java_INCLUDE_DIRS            - Full paths to all include dirs.
        Java_LIBRARIES                - Full paths to all libraries.
        Java_<component>_FOUND        - TRUE if <component> is found.
 
     
 
      Example Usages:
 
        FIND_PACKAGE(Java)
        FIND_PACKAGE(Java COMPONENTS Runtime)
        FIND_PACKAGE(Java COMPONENTS Development)
 
     
 
 
  FindKDE3
      Find the KDE3 include and library dirs, KDE preprocessors and define a
      some macros
 
     
 
      This module defines the following variables:
 
        KDE3_DEFINITIONS        - compiler definitions required for compiling KDE software
        KDE3_INCLUDE_DIR        - the KDE include directory
        KDE3_INCLUDE_DIRS        - the KDE and the Qt include directory, for use with INCLUDE_DIRECTORIES()
        KDE3_LIB_DIR            - the directory where the KDE libraries are installed, for use with LINK_DIRECTORIES()
        QT_AND_KDECORE_LIBS      - this contains both the Qt and the kdecore library
        KDE3_DCOPIDL_EXECUTABLE  - the dcopidl executable
        KDE3_DCOPIDL2CPP_EXECUTABLE - the dcopidl2cpp executable
        KDE3_KCFGC_EXECUTABLE    - the kconfig_compiler executable
        KDE3_FOUND              - set to TRUE if all of the above has been found
 
     
 
      The following user adjustable options are provided:
 
        KDE3_BUILD_TESTS - enable this to build KDE testcases
 
     
 
     
 
      It also adds the following macros (from KDE3Macros.cmake) SRCS_VAR is
      always the variable which contains the list of source files for your
      application or library.
 
      KDE3_AUTOMOC(file1 ...  fileN)
 
          Call this if you want to have automatic moc file handling.
          This means if you include "foo.moc" in the source file foo.cpp
          a moc file for the header foo.h will be created automatically.
          You can set the property SKIP_AUTOMAKE using SET_SOURCE_FILES_PROPERTIES()
          to exclude some files in the list from being processed.
 
     
 
      KDE3_ADD_MOC_FILES(SRCS_VAR file1 ...  fileN )
 
          If you don't use the KDE3_AUTOMOC() macro, for the files
          listed here moc files will be created (named "foo.moc.cpp")
 
     
 
      KDE3_ADD_DCOP_SKELS(SRCS_VAR header1.h ...  headerN.h )
 
          Use this to generate DCOP skeletions from the listed headers.
 
     
 
      KDE3_ADD_DCOP_STUBS(SRCS_VAR header1.h ...  headerN.h )
 
            Use this to generate DCOP stubs from the listed headers.
 
     
 
      KDE3_ADD_UI_FILES(SRCS_VAR file1.ui ...  fileN.ui )
 
          Use this to add the Qt designer ui files to your application/library.
 
     
 
      KDE3_ADD_KCFG_FILES(SRCS_VAR file1.kcfgc ...  fileN.kcfgc )
 
          Use this to add KDE kconfig compiler files to your application/library.
 
     
 
      KDE3_INSTALL_LIBTOOL_FILE(target)
 
          This will create and install a simple libtool file for the given target.
 
     
 
      KDE3_ADD_EXECUTABLE(name file1 ...  fileN )
 
          Currently identical to ADD_EXECUTABLE(), may provide some advanced features in the future.
 
     
 
      KDE3_ADD_KPART(name [WITH_PREFIX] file1 ...  fileN )
 
          Create a KDE plugin (KPart, kioslave, etc.) from the given source files.
          If WITH_PREFIX is given, the resulting plugin will have the prefix "lib", otherwise it won't.
          It creates and installs an appropriate libtool la-file.
 
     
 
      KDE3_ADD_KDEINIT_EXECUTABLE(name file1 ...  fileN )
 
          Create a KDE application in the form of a module loadable via kdeinit.
          A library named kdeinit_<name> will be created and a small executable which links to it.
 
     
 
      The option KDE3_ENABLE_FINAL to enable all-in-one compilation is no
      longer supported.
 
     
 
      Author: Alexander Neundorf <neundorf@kde.org>
 
  FindKDE4
       
 
      Find KDE4 and provide all necessary variables and macros to compile
      software for it.  It looks for KDE 4 in the following directories in
      the given order:
 
        CMAKE_INSTALL_PREFIX
        KDEDIRS
        /opt/kde4
 
     
 
      Please look in FindKDE4Internal.cmake and KDE4Macros.cmake for more
      information.  They are installed with the KDE 4 libraries in
      $KDEDIRS/share/apps/cmake/modules/.
 
      Author: Alexander Neundorf <neundorf@kde.org>
 
  FindLAPACK
      Find LAPACK library
 
      This module finds an installed fortran library that implements the
      LAPACK linear-algebra interface (see http://www.netlib.org/lapack/).
 
      The approach follows that taken for the autoconf macro file,
      acx_lapack.m4 (distributed at
      http://ac-archive.sourceforge.net/ac-archive/acx_lapack.html).
 
      This module sets the following variables:
 
        LAPACK_FOUND - set to true if a library implementing the LAPACK interface
          is found
        LAPACK_LINKER_FLAGS - uncached list of required linker flags (excluding -l
          and -L).
        LAPACK_LIBRARIES - uncached list of libraries (using full path name) to
          link against to use LAPACK
        LAPACK95_LIBRARIES - uncached list of libraries (using full path name) to
          link against to use LAPACK95
        LAPACK95_FOUND - set to true if a library implementing the LAPACK f95
          interface is found
        BLA_STATIC  if set on this determines what kind of linkage we do (static)
        BLA_VENDOR  if set checks only the specified vendor, if not set checks
            all the possibilities
        BLA_F95    if set on tries to find the f95 interfaces for BLAS/LAPACK
 
      ## List of vendors (BLA_VENDOR) valid in this module # Intel(mkl),
      ACML,Apple, NAS, Generic
 
  FindLATEX
      Find Latex
 
      This module finds if Latex is installed and determines where the
      executables are.  This code sets the following variables:
 
       
        LATEX_COMPILER:      path to the LaTeX compiler
        PDFLATEX_COMPILER:    path to the PdfLaTeX compiler
        BIBTEX_COMPILER:      path to the BibTeX compiler
        MAKEINDEX_COMPILER:  path to the MakeIndex compiler
        DVIPS_CONVERTER:      path to the DVIPS converter
        PS2PDF_CONVERTER:    path to the PS2PDF converter
        LATEX2HTML_CONVERTER: path to the LaTeX2Html converter
 
     
 
 
  FindLibXml2
      Try to find the LibXml2 xml processing library
 
      Once done this will define
 
        LIBXML2_FOUND - System has LibXml2
        LIBXML2_INCLUDE_DIR - The LibXml2 include directory
        LIBXML2_LIBRARIES - The libraries needed to use LibXml2
        LIBXML2_DEFINITIONS - Compiler switches required for using LibXml2
        LIBXML2_XMLLINT_EXECUTABLE - The XML checking tool xmllint coming with LibXml2
 
 
  FindLibXslt
      Try to find the LibXslt library
 
      Once done this will define
 
        LIBXSLT_FOUND - system has LibXslt
        LIBXSLT_INCLUDE_DIR - the LibXslt include directory
        LIBXSLT_LIBRARIES - Link these to LibXslt
        LIBXSLT_DEFINITIONS - Compiler switches required for using LibXslt
 
 
  FindLua50
       
 
      Locate Lua library This module defines
 
        LUA50_FOUND, if false, do not try to link to Lua
        LUA_LIBRARIES, both lua and lualib
        LUA_INCLUDE_DIR, where to find lua.h and lualib.h (and probably lauxlib.h)
 
     
 
      Note that the expected include convention is
 
        #include "lua.h"
 
      and not
 
        #include <lua/lua.h>
 
      This is because, the lua location is not standardized and may exist in
      locations other than lua/
 
  FindLua51
       
 
      Locate Lua library This module defines
 
        LUA51_FOUND, if false, do not try to link to Lua
        LUA_LIBRARIES
        LUA_INCLUDE_DIR, where to find lua.h
 
     
 
      Note that the expected include convention is
 
        #include "lua.h"
 
      and not
 
        #include <lua/lua.h>
 
      This is because, the lua location is not standardized and may exist in
      locations other than lua/
 
  FindMFC
      Find MFC on Windows
 
      Find the native MFC - i.e.  decide if an application can link to the
      MFC libraries.
 
        MFC_FOUND - Was MFC support found
 
      You don't need to include anything or link anything to use it.
 
  FindMPEG
      Find the native MPEG includes and library
 
      This module defines
 
        MPEG_INCLUDE_DIR, where to find MPEG.h, etc.
        MPEG_LIBRARIES, the libraries required to use MPEG.
        MPEG_FOUND, If false, do not try to use MPEG.
 
      also defined, but not for general use are
 
        MPEG_mpeg2_LIBRARY, where to find the MPEG library.
        MPEG_vo_LIBRARY, where to find the vo library.
 
 
  FindMPEG2
      Find the native MPEG2 includes and library
 
      This module defines
 
        MPEG2_INCLUDE_DIR, path to mpeg2dec/mpeg2.h, etc.
        MPEG2_LIBRARIES, the libraries required to use MPEG2.
        MPEG2_FOUND, If false, do not try to use MPEG2.
 
      also defined, but not for general use are
 
        MPEG2_mpeg2_LIBRARY, where to find the MPEG2 library.
        MPEG2_vo_LIBRARY, where to find the vo library.
 
 
  FindMPI
      Message Passing Interface (MPI) module.
 
     
 
      The Message Passing Interface (MPI) is a library used to write
      high-performance parallel applications that use message passing, and
      is typically deployed on a cluster.  MPI is a standard interface
      (defined by the MPI forum) for which many implementations are
      available.  All of these implementations have somewhat different
      compilation approaches (different include paths, libraries to link
      against, etc.), and this module tries to smooth out those differences.
 
      This module will set the following variables:
 
          MPI_FOUND                  TRUE if we have found MPI
          MPI_COMPILE_FLAGS          Compilation flags for MPI programs
          MPI_INCLUDE_PATH          Include path(s) for MPI header
          MPI_LINK_FLAGS            Linking flags for MPI programs
          MPI_LIBRARY                First MPI library to link against (cached)
          MPI_EXTRA_LIBRARY          Extra MPI libraries to link against (cached)
          MPI_LIBRARIES              All libraries to link MPI programs against
          MPIEXEC                    Executable for running MPI programs
          MPIEXEC_NUMPROC_FLAG      Flag to pass to MPIEXEC before giving it the
                                    number of processors to run on
          MPIEXEC_PREFLAGS          Flags to pass to MPIEXEC directly before the
                                    executable to run.
          MPIEXEC_POSTFLAGS          Flags to pass to MPIEXEC after all other flags.
 
     
 
      This module will attempt to auto-detect these settings, first by
      looking for a MPI compiler, which many MPI implementations provide as
      a pass-through to the native compiler to simplify the compilation of
      MPI programs.  The MPI compiler is stored in the cache variable
      MPI_COMPILER, and will attempt to look for commonly-named drivers
      mpic++, mpicxx, mpiCC, or mpicc.  If the compiler driver is found and
      recognized, it will be used to set all of the module variables.  To
      skip this auto-detection, set MPI_LIBRARY and MPI_INCLUDE_PATH in the
      CMake cache.
 
      If no compiler driver is found or the compiler driver is not
      recognized, this module will then search for common include paths and
      library names to try to detect MPI.
 
      If CMake initially finds a different MPI than was intended, and you
      want to use the MPI compiler auto-detection for a different MPI
      implementation, set MPI_COMPILER to the MPI compiler driver you want
      to use (e.g., mpicxx) and then set MPI_LIBRARY to the string
      MPI_LIBRARY-NOTFOUND.  When you re-configure, auto-detection of MPI
      will run again with the newly-specified MPI_COMPILER.
 
      When using MPIEXEC to execute MPI applications, you should typically
      use all of the MPIEXEC flags as follows:
 
          ${MPIEXEC} ${MPIEXEC_NUMPROC_FLAG} PROCS ${MPIEXEC_PREFLAGS} EXECUTABLE
            ${MPIEXEC_POSTFLAGS} ARGS
 
      where PROCS is the number of processors on which to execute the
      program, EXECUTABLE is the MPI program, and ARGS are the arguments to
      pass to the MPI program.
 
  FindMatlab
      this module looks for Matlab
 
      Defines:
 
        MATLAB_INCLUDE_DIR: include path for mex.h, engine.h
        MATLAB_LIBRARIES:  required libraries: libmex, etc
        MATLAB_MEX_LIBRARY: path to libmex.lib
        MATLAB_MX_LIBRARY:  path to libmx.lib
        MATLAB_ENG_LIBRARY: path to libeng.lib
 
 
  FindMotif
      Try to find Motif (or lesstif)
 
      Once done this will define:
 
        MOTIF_FOUND        - system has MOTIF
        MOTIF_INCLUDE_DIR  - include paths to use Motif
        MOTIF_LIBRARIES    - Link these to use Motif
 
 
  FindOpenAL
       
 
      Locate OpenAL This module defines OPENAL_LIBRARY OPENAL_FOUND, if
      false, do not try to link to OpenAL OPENAL_INCLUDE_DIR, where to find
      the headers
 
      $OPENALDIR is an environment variable that would correspond to the
      ./configure --prefix=$OPENALDIR used in building OpenAL.
 
      Created by Eric Wing.  This was influenced by the FindSDL.cmake
      module.
 
  FindOpenGL
      Try to find OpenGL
 
      Once done this will define
 
       
        OPENGL_FOUND        - system has OpenGL
        OPENGL_XMESA_FOUND  - system has XMESA
        OPENGL_GLU_FOUND    - system has GLU
        OPENGL_INCLUDE_DIR  - the GL include directory
        OPENGL_LIBRARIES    - Link these to use OpenGL and GLU
         
 
      If you want to use just GL you can use these values
 
        OPENGL_gl_LIBRARY  - Path to OpenGL Library
        OPENGL_glu_LIBRARY  - Path to GLU Library
       
 
      On OSX default to using the framework version of opengl People will
      have to change the cache values of OPENGL_glu_LIBRARY and
      OPENGL_gl_LIBRARY to use OpenGL with X11 on OSX
 
  FindOpenMP
      Finds OpenMP support
 
      This module can be used to detect OpenMP support in a compiler.  If
      the compiler supports OpenMP, the flags required to compile with
      openmp support are set.
 
      The following variables are set:
 
          OpenMP_C_FLAGS - flags to add to the C compiler for OpenMP support
          OpenMP_CXX_FLAGS - flags to add to the CXX compiler for OpenMP support
          OPENMP_FOUND - true if openmp is detected
 
     
 
      Supported compilers can be found at
      http://openmp.org/wp/openmp-compilers/
 
  FindOpenSSL
      Try to find the OpenSSL encryption library
 
      Once done this will define
 
        OPENSSL_ROOT_DIR - Set this variable to the root installation of OpenSSL
 
     
 
      Read-Only variables:
 
        OPENSSL_FOUND - system has the OpenSSL library
        OPENSSL_INCLUDE_DIR - the OpenSSL include directory
        OPENSSL_LIBRARIES - The libraries needed to use OpenSSL
 
 
  FindOpenSceneGraph
      Find OpenSceneGraph
 
      This module searches for the OpenSceneGraph core "osg" library as well
      as OpenThreads, and whatever additional COMPONENTS (nodekits) that you
      specify.
 
          See http://www.openscenegraph.org
 
     
 
      NOTE: To use this module effectively you must either require CMake >=
      2.6.3 with cmake_minimum_required(VERSION 2.6.3) or download and place
      FindOpenThreads.cmake, Findosg_functions.cmake, Findosg.cmake, and
      Find<etc>.cmake files into your CMAKE_MODULE_PATH.
 
      ==================================
 
      This module accepts the following variables (note mixed case)
 
          OpenSceneGraph_DEBUG - Enable debugging output
 
     
 
          OpenSceneGraph_MARK_AS_ADVANCED - Mark cache variables as advanced
                                            automatically
 
     
 
      The following environment variables are also respected for finding the
      OSG and it's various components.  CMAKE_PREFIX_PATH can also be used
      for this (see find_library() CMake documentation).
 
          <MODULE>_DIR (where MODULE is of the form "OSGVOLUME" and there is a FindosgVolume.cmake file)
          OSG_DIR
          OSGDIR
          OSG_ROOT
 
     
 
      This module defines the following output variables:
 
          OPENSCENEGRAPH_FOUND - Was the OSG and all of the specified components found?
 
     
 
          OPENSCENEGRAPH_VERSION - The version of the OSG which was found
 
     
 
          OPENSCENEGRAPH_INCLUDE_DIRS - Where to find the headers
 
     
 
          OPENSCENEGRAPH_LIBRARIES - The OSG libraries
 
     
 
      ================================== Example Usage:
 
        find_package(OpenSceneGraph 2.0.0 REQUIRED osgDB osgUtil)
            # libOpenThreads & libosg automatically searched
        include_directories(${OPENSCENEGRAPH_INCLUDE_DIRS})
 
     
 
        add_executable(foo foo.cc)
        target_link_libraries(foo ${OPENSCENEGRAPH_LIBRARIES})
 
     
 
 
  FindOpenThreads
       
 
      OpenThreads is a C++ based threading library.  Its largest userbase
      seems to OpenSceneGraph so you might notice I accept OSGDIR as an
      environment path.  I consider this part of the Findosg* suite used to
      find OpenSceneGraph components.  Each component is separate and you
      must opt in to each module.
 
      Locate OpenThreads This module defines OPENTHREADS_LIBRARY
      OPENTHREADS_FOUND, if false, do not try to link to OpenThreads
      OPENTHREADS_INCLUDE_DIR, where to find the headers
 
      $OPENTHREADS_DIR is an environment variable that would correspond to
      the ./configure --prefix=$OPENTHREADS_DIR used in building osg.
 
      Created by Eric Wing.
 
  FindPHP4
      Find PHP4
 
      This module finds if PHP4 is installed and determines where the
      include files and libraries are.  It also determines what the name of
      the library is.  This code sets the following variables:
 
        PHP4_INCLUDE_PATH      = path to where php.h can be found
        PHP4_EXECUTABLE        = full path to the php4 binary
 
     
 
 
  FindPNG
      Find the native PNG includes and library
 
     
 
      This module defines
 
        PNG_INCLUDE_DIR, where to find png.h, etc.
        PNG_LIBRARIES, the libraries to link against to use PNG.
        PNG_DEFINITIONS - You should add_definitons(${PNG_DEFINITIONS}) before compiling code that includes png library files.
        PNG_FOUND, If false, do not try to use PNG.
 
      also defined, but not for general use are
 
        PNG_LIBRARY, where to find the PNG library.
 
      None of the above will be defined unles zlib can be found.  PNG
      depends on Zlib
 
  FindPackageHandleStandardArgs
       
 
      FIND_PACKAGE_HANDLE_STANDARD_ARGS(NAME (DEFAULT_MSG|"Custom failure
      message") VAR1 ...  )
 
          This macro is intended to be used in FindXXX.cmake modules files.
          It handles the REQUIRED and QUIET argument to FIND_PACKAGE() and
          it also sets the <UPPERCASED_NAME>_FOUND variable.
          The package is found if all variables listed are TRUE.
          Example:
 
     
 
          FIND_PACKAGE_HANDLE_STANDARD_ARGS(LibXml2 DEFAULT_MSG LIBXML2_LIBRARIES LIBXML2_INCLUDE_DIR)
 
     
 
          LibXml2 is considered to be found, if both LIBXML2_LIBRARIES and
          LIBXML2_INCLUDE_DIR are valid. Then also LIBXML2_FOUND is set to TRUE.
          If it is not found and REQUIRED was used, it fails with FATAL_ERROR,
          independent whether QUIET was used or not.
          If it is found, the location is reported using the VAR1 argument, so
          here a message "Found LibXml2: /usr/lib/libxml2.so" will be printed out.
          If the second argument is DEFAULT_MSG, the message in the failure case will
          be "Could NOT find LibXml2", if you don't like this message you can specify
          your own custom failure message there.
 
 
  FindPackageMessage
       
 
      FIND_PACKAGE_MESSAGE(<name> "message for user" "find result details")
 
      This macro is intended to be used in FindXXX.cmake modules files.  It
      will print a message once for each unique find result.  This is useful
      for telling the user where a package was found.  The first argument
      specifies the name (XXX) of the package.  The second argument
      specifies the message to display.  The third argument lists details
      about the find result so that if they change the message will be
      displayed again.  The macro also obeys the QUIET argument to the
      find_package command.
 
      Example:
 
        IF(X11_FOUND)
          FIND_PACKAGE_MESSAGE(X11 "Found X11: ${X11_X11_LIB}"
            "[${X11_X11_LIB}][${X11_INCLUDE_DIR}]")
        ELSE(X11_FOUND)
          ...
        ENDIF(X11_FOUND)
 
 
  FindPerl
      Find perl
 
      this module looks for Perl
 
        PERL_EXECUTABLE - the full path to perl
        PERL_FOUND      - If false, don't attempt to use perl.
 
 
  FindPerlLibs
      Find Perl libraries
 
      This module finds if PERL is installed and determines where the
      include files and libraries are.  It also determines what the name of
      the library is.  This code sets the following variables:
 
        PERLLIBS_FOUND    = True if perl.h & libperl were found
        PERL_INCLUDE_PATH = path to where perl.h is found
        PERL_LIBRARY      = path to libperl
        PERL_EXECUTABLE  = full path to the perl binary
 
     
 
        The following variables are also available if needed
        (introduced after CMake 2.6.4)
 
     
 
        PERL_SITESEARCH    = path to the sitesearch install dir
        PERL_SITELIB      = path to the sitelib install directory
        PERL_VENDORARCH    = path to the vendor arch install directory
        PERL_VENDORLIB    = path to the vendor lib install directory
        PERL_ARCHLIB      = path to the arch lib install directory
        PERL_PRIVLIB      = path to the priv lib install directory
        PERL_EXTRA_C_FLAGS = Compilation flags used to build perl
 
     
 
 
  FindPhysFS
       
 
      Locate PhysFS library This module defines PHYSFS_LIBRARY, the name of
      the library to link against PHYSFS_FOUND, if false, do not try to link
      to PHYSFS PHYSFS_INCLUDE_DIR, where to find physfs.h
 
      $PHYSFSDIR is an environment variable that would correspond to the
      ./configure --prefix=$PHYSFSDIR used in building PHYSFS.
 
      Created by Eric Wing.
 
  FindPike
      Find Pike
 
      This module finds if PIKE is installed and determines where the
      include files and libraries are.  It also determines what the name of
      the library is.  This code sets the following variables:
 
        PIKE_INCLUDE_PATH      = path to where program.h is found
        PIKE_EXECUTABLE        = full path to the pike binary
 
     
 
 
  FindPkgConfig
      a pkg-config module for CMake
 
     
 
      Usage:
 
          pkg_check_modules(<PREFIX> [REQUIRED] [QUIET] <MODULE> [<MODULE>]*)
            checks for all the given modules
 
     
 
          pkg_search_module(<PREFIX> [REQUIRED] [QUIET] <MODULE> [<MODULE>]*)
            checks for given modules and uses the first working one
 
     
 
      When the 'REQUIRED' argument was set, macros will fail with an error
      when module(s) could not be found
 
      When the 'QUIET' argument is set, no status messages will be printed.
 
      It sets the following variables:
 
          PKG_CONFIG_FOUND        ... true if pkg-config works on the system
          PKG_CONFIG_EXECUTABLE    ... pathname of the pkg-config program
          <PREFIX>_FOUND          ... set to 1 if module(s) exist
 
     
 
      For the following variables two sets of values exist; first one is the
      common one and has the given PREFIX.  The second set contains flags
      which are given out when pkgconfig was called with the '--static'
      option.
 
          <XPREFIX>_LIBRARIES      ... only the libraries (w/o the '-l')
          <XPREFIX>_LIBRARY_DIRS  ... the paths of the libraries (w/o the '-L')
          <XPREFIX>_LDFLAGS        ... all required linker flags
          <XPREFIX>_LDFLAGS_OTHER  ... all other linker flags
          <XPREFIX>_INCLUDE_DIRS  ... the '-I' preprocessor flags (w/o the '-I')
          <XPREFIX>_CFLAGS        ... all required cflags
          <XPREFIX>_CFLAGS_OTHER  ... the other compiler flags
 
     
 
          <XPREFIX> = <PREFIX>        for common case
          <XPREFIX> = <PREFIX>_STATIC for static linking
 
     
 
      There are some special variables whose prefix depends on the count of
      given modules.  When there is only one module, <PREFIX> stays
      unchanged.  When there are multiple modules, the prefix will be
      changed to <PREFIX>_<MODNAME>:
 
          <XPREFIX>_VERSION    ... version of the module
          <XPREFIX>_PREFIX    ... prefix-directory of the module
          <XPREFIX>_INCLUDEDIR ... include-dir of the module
          <XPREFIX>_LIBDIR    ... lib-dir of the module
 
     
 
          <XPREFIX> = <PREFIX>  when |MODULES| == 1, else
          <XPREFIX> = <PREFIX>_<MODNAME>
 
     
 
      A <MODULE> parameter can have the following formats:
 
          {MODNAME}            ... matches any version
          {MODNAME}>={VERSION} ... at least version <VERSION> is required
          {MODNAME}={VERSION}  ... exactly version <VERSION> is required
          {MODNAME}<={VERSION} ... modules must not be newer than <VERSION>
 
     
 
      Examples
 
          pkg_check_modules (GLIB2  glib-2.0)
 
     
 
          pkg_check_modules (GLIB2  glib-2.0>=2.10)
            requires at least version 2.10 of glib2 and defines e.g.
              GLIB2_VERSION=2.10.3
 
     
 
          pkg_check_modules (FOO    glib-2.0>=2.10 gtk+-2.0)
            requires both glib2 and gtk2, and defines e.g.
              FOO_glib-2.0_VERSION=2.10.3
              FOO_gtk+-2.0_VERSION=2.8.20
 
     
 
          pkg_check_modules (XRENDER REQUIRED xrender)
            defines e.g.:
              XRENDER_LIBRARIES=Xrender;X11
              XRENDER_STATIC_LIBRARIES=Xrender;X11;pthread;Xau;Xdmcp
 
     
 
          pkg_search_module (BAR    libxml-2.0 libxml2 libxml>=2)
 
 
  FindProducer
       
 
      Though Producer isn't directly part of OpenSceneGraph, its primary
      user is OSG so I consider this part of the Findosg* suite used to find
      OpenSceneGraph components.  You'll notice that I accept OSGDIR as an
      environment path.
 
      Each component is separate and you must opt in to each module.  You
      must also opt into OpenGL (and OpenThreads?) as these modules won't do
      it for you.  This is to allow you control over your own system piece
      by piece in case you need to opt out of certain components or change
      the Find behavior for a particular module (perhaps because the default
      FindOpenGL.cmake module doesn't work with your system as an example).
      If you want to use a more convenient module that includes everything,
      use the FindOpenSceneGraph.cmake instead of the Findosg*.cmake
      modules.
 
      Locate Producer This module defines PRODUCER_LIBRARY PRODUCER_FOUND,
      if false, do not try to link to Producer PRODUCER_INCLUDE_DIR, where
      to find the headers
 
      $PRODUCER_DIR is an environment variable that would correspond to the
      ./configure --prefix=$PRODUCER_DIR used in building osg.
 
      Created by Eric Wing.
 
  FindProtobuf
       
 
      Locate and configure the Google Protocol Buffers library.  Defines the
      following variables:
 
          PROTOBUF_FOUND - Found the Google Protocol Buffers library
          PROTOBUF_INCLUDE_DIRS - Include directories for Google Protocol Buffers
          PROTOBUF_LIBRARIES - The protobuf library
 
     
 
      The following cache variables are also defined:
 
          PROTOBUF_LIBRARY - The protobuf library
          PROTOBUF_PROTOC_LIBRARY  - The protoc library
          PROTOBUF_INCLUDE_DIR - The include directory for protocol buffers
          PROTOBUF_PROTOC_EXECUTABLE - The protoc compiler
 
     
 
        ====================================================================
        Example:
 
     
 
          find_package(Protobuf REQUIRED)
          include_directories(${PROTOBUF_INCLUDE_DIRS})
 
     
 
          include_directories(${CMAKE_CURRENT_BINARY_DIR})
          PROTOBUF_GENERATE_CPP(PROTO_SRCS PROTO_HDRS foo.proto)
          add_executable(bar bar.cc ${PROTO_SRCS} ${PROTO_HDRS})
          target_link_libraries(bar ${PROTOBUF_LIBRARY})
 
     
 
      NOTE: You may need to link against pthreads, depending on the
      platform.
 
        ====================================================================
 
     
 
      PROTOBUF_GENERATE_CPP (public function)
 
          SRCS = Variable to define with autogenerated
                source files
          HDRS = Variable to define with autogenerated
                header files
          ARGN = proto files
 
     
 
        ====================================================================
 
 
  FindPythonInterp
      Find python interpreter
 
      This module finds if Python interpreter is installed and determines
      where the executables are.  This code sets the following variables:
 
        PYTHONINTERP_FOUND - Was the Python executable found
        PYTHON_EXECUTABLE  - path to the Python interpreter
 
     
 
 
  FindPythonLibs
      Find python libraries
 
      This module finds if Python is installed and determines where the
      include files and libraries are.  It also determines what the name of
      the library is.  This code sets the following variables:
 
        PYTHONLIBS_FOUND      - have the Python libs been found
        PYTHON_LIBRARIES      - path to the python library
        PYTHON_INCLUDE_PATH    - path to where Python.h is found (deprecated)
        PYTHON_INCLUDE_DIRS    - path to where Python.h is found
        PYTHON_DEBUG_LIBRARIES - path to the debug library
 
     
 
 
  FindQt
      Searches for all installed versions of QT.
 
      This should only be used if your project can work with multiple
      versions of QT.  If not, you should just directly use FindQt4 or
      FindQt3.  If multiple versions of QT are found on the machine, then
      The user must set the option DESIRED_QT_VERSION to the version they
      want to use.  If only one version of qt is found on the machine, then
      the DESIRED_QT_VERSION is set to that version and the matching FindQt3
      or FindQt4 module is included.  Once the user sets DESIRED_QT_VERSION,
      then the FindQt3 or FindQt4 module is included.
 
        QT_REQUIRED if this is set to TRUE then if CMake can
                    not find QT4 or QT3 an error is raised
                    and a message is sent to the user.
 
     
 
        DESIRED_QT_VERSION OPTION is created
        QT4_INSTALLED is set to TRUE if qt4 is found.
        QT3_INSTALLED is set to TRUE if qt3 is found.
 
 
  FindQt3
      Locate Qt include paths and libraries
 
      This module defines:
 
        QT_INCLUDE_DIR - where to find qt.h, etc.
        QT_LIBRARIES  - the libraries to link against to use Qt.
        QT_DEFINITIONS - definitions to use when
                          compiling code that uses Qt.
        QT_FOUND      - If false, don't try to use Qt.
 
     
 
      If you need the multithreaded version of Qt, set QT_MT_REQUIRED to
      TRUE
 
      Also defined, but not for general use are:
 
        QT_MOC_EXECUTABLE, where to find the moc tool.
        QT_UIC_EXECUTABLE, where to find the uic tool.
        QT_QT_LIBRARY, where to find the Qt library.
        QT_QTMAIN_LIBRARY, where to find the qtmain
          library. This is only required by Qt3 on Windows.
 
 
  FindQt4
      Find QT 4
 
      This module can be used to find Qt4.  The most important issue is that
      the Qt4 qmake is available via the system path.  This qmake is then
      used to detect basically everything else.  This module defines a
      number of key variables and macros.  The variable QT_USE_FILE is set
      which is the path to a CMake file that can be included to compile Qt 4
      applications and libraries.  It sets up the compilation environment
      for include directories, preprocessor defines and populates a
      QT_LIBRARIES variable.
 
      Typical usage could be something like:
 
          find_package(Qt4 4.4.3 COMPONENTS QtCore QtGui QtXml REQUIRED )
          include(${QT_USE_FILE})
          add_executable(myexe main.cpp)
          target_link_libraries(myexe ${QT_LIBRARIES})
 
     
 
      The minimum required version can be specified using the standard
      find_package()-syntax (see example above).  For compatibility with
      older versions of FindQt4.cmake it is also possible to set the
      variable QT_MIN_VERSION to the minimum required version of Qt4 before
      the find_package(Qt4) command.  If both are used, the version used in
      the find_package() command overrides the one from QT_MIN_VERSION.
 
      When using the components argument, QT_USE_QT* variables are
      automatically set for the QT_USE_FILE to pick up.  If one wishes to
      manually set them, the available ones to set include:
 
                          QT_DONT_USE_QTCORE
                          QT_DONT_USE_QTGUI
                          QT_USE_QT3SUPPORT
                          QT_USE_QTASSISTANT
                          QT_USE_QAXCONTAINER
                          QT_USE_QAXSERVER
                          QT_USE_QTDESIGNER
                          QT_USE_QTMOTIF
                          QT_USE_QTMAIN
                          QT_USE_QTMULTIMEDIA
                          QT_USE_QTNETWORK
                          QT_USE_QTNSPLUGIN
                          QT_USE_QTOPENGL
                          QT_USE_QTSQL
                          QT_USE_QTXML
                          QT_USE_QTSVG
                          QT_USE_QTTEST
                          QT_USE_QTUITOOLS
                          QT_USE_QTDBUS
                          QT_USE_QTSCRIPT
                          QT_USE_QTASSISTANTCLIENT
                          QT_USE_QTHELP
                          QT_USE_QTWEBKIT
                          QT_USE_QTXMLPATTERNS
                          QT_USE_PHONON
                          QT_USE_QTSCRIPTTOOLS
                          QT_USE_QTDECLARATIVE
 
     
 
        QT_USE_IMPORTED_TARGETS
              If this variable is set to TRUE, FindQt4.cmake will create imported
              library targets for the various Qt libraries and set the
              library variables like QT_QTCORE_LIBRARY to point at these imported
              targets instead of the library file on disk. This provides much better
              handling of the release and debug versions of the Qt libraries and is
              also always backwards compatible, except for the case that dependencies
              of libraries are exported, these will then also list the names of the
              imported targets as dependency and not the file location on disk. This
              is much more flexible, but requires that FindQt4.cmake is executed before
              such an exported dependency file is processed.
 
     
 
      There are also some files that need processing by some Qt tools such
      as moc and uic.  Listed below are macros that may be used to process
      those files.
 
       
        macro QT4_WRAP_CPP(outfiles inputfile ... OPTIONS ...)
              create moc code from a list of files containing Qt class with
              the Q_OBJECT declaration.  Per-direcotry preprocessor definitions
              are also added.  Options may be given to moc, such as those found
              when executing "moc -help". 
 
     
 
        macro QT4_WRAP_UI(outfiles inputfile ... OPTIONS ...)
              create code from a list of Qt designer ui files.
              Options may be given to uic, such as those found
              when executing "uic -help"
 
     
 
        macro QT4_ADD_RESOURCES(outfiles inputfile ... OPTIONS ...)
              create code from a list of Qt resource files.
              Options may be given to rcc, such as those found
              when executing "rcc -help"
 
     
 
        macro QT4_GENERATE_MOC(inputfile outputfile )
              creates a rule to run moc on infile and create outfile.
              Use this if for some reason QT4_WRAP_CPP() isn't appropriate, e.g.
              because you need a custom filename for the moc file or something similar.
 
     
 
        macro QT4_AUTOMOC(sourcefile1 sourcefile2 ... )
              This macro is still experimental.
              It can be used to have moc automatically handled.
              So if you have the files foo.h and foo.cpp, and in foo.h a
              a class uses the Q_OBJECT macro, moc has to run on it. If you don't
              want to use QT4_WRAP_CPP() (which is reliable and mature), you can insert
              #include "foo.moc"
              in foo.cpp and then give foo.cpp as argument to QT4_AUTOMOC(). This will the
              scan all listed files at cmake-time for such included moc files and if it finds
              them cause a rule to be generated to run moc at build time on the
              accompanying header file foo.h.
              If a source file has the SKIP_AUTOMOC property set it will be ignored by this macro.
 
     
 
        macro QT4_ADD_DBUS_INTERFACE(outfiles interface basename)
              create a the interface header and implementation files with the
              given basename from the given interface xml file and add it to
              the list of sources
 
     
 
        macro QT4_ADD_DBUS_INTERFACES(outfiles inputfile ... )
              create the interface header and implementation files
              for all listed interface xml files
              the name will be automatically determined from the name of the xml file
 
     
 
        macro QT4_ADD_DBUS_ADAPTOR(outfiles xmlfile parentheader parentclassname [basename] [classname])
              create a dbus adaptor (header and implementation file) from the xml file
              describing the interface, and add it to the list of sources. The adaptor
              forwards the calls to a parent class, defined in parentheader and named
              parentclassname. The name of the generated files will be
              <basename>adaptor.{cpp,h} where basename defaults to the basename of the xml file.
              If <classname> is provided, then it will be used as the classname of the
              adaptor itself.
 
     
 
        macro QT4_GENERATE_DBUS_INTERFACE( header [interfacename] OPTIONS ...)
              generate the xml interface file from the given header.
              If the optional argument interfacename is omitted, the name of the
              interface file is constructed from the basename of the header with
              the suffix .xml appended.
              Options may be given to qdbuscpp2xml, such as those found when executing "qdbuscpp2xml --help"
 
     
 
        macro QT4_CREATE_TRANSLATION( qm_files directories ... sources ...
                                      ts_files ... OPTIONS ...)
              out: qm_files
              in:  directories sources ts_files
              options: flags to pass to lupdate, such as -extensions to specify
              extensions for a directory scan.
              generates commands to create .ts (vie lupdate) and .qm
              (via lrelease) - files from directories and/or sources. The ts files are
              created and/or updated in the source tree (unless given with full paths).
              The qm files are generated in the build tree.
              Updating the translations can be done by adding the qm_files
              to the source list of your library/executable, so they are
              always updated, or by adding a custom target to control when
              they get updated/generated.
 
     
 
        macro QT4_ADD_TRANSLATION( qm_files ts_files ... )
              out: qm_files
              in:  ts_files
              generates commands to create .qm from .ts - files. The generated
              filenames can be found in qm_files. The ts_files
              must exists and are not updated in any way.
 
     
 
     
 
        Below is a detailed list of variables that FindQt4.cmake sets.
        QT_FOUND        If false, don't try to use Qt.
        QT4_FOUND        If false, don't try to use Qt 4.
 
     
 
        QT_VERSION_MAJOR The major version of Qt found.
        QT_VERSION_MINOR The minor version of Qt found.
        QT_VERSION_PATCH The patch version of Qt found.
 
     
 
        QT_EDITION              Set to the edition of Qt (i.e. DesktopLight)
        QT_EDITION_DESKTOPLIGHT  True if QT_EDITION == DesktopLight
        QT_QTCORE_FOUND          True if QtCore was found.
        QT_QTGUI_FOUND          True if QtGui was found.
        QT_QT3SUPPORT_FOUND      True if Qt3Support was found.
        QT_QTASSISTANT_FOUND    True if QtAssistant was found.
        QT_QTASSISTANTCLIENT_FOUND  True if QtAssistantClient was found.
        QT_QAXCONTAINER_FOUND    True if QAxContainer was found (Windows only).
        QT_QAXSERVER_FOUND      True if QAxServer was found (Windows only).
        QT_QTDBUS_FOUND          True if QtDBus was found.
        QT_QTDESIGNER_FOUND      True if QtDesigner was found.
        QT_QTDESIGNERCOMPONENTS  True if QtDesignerComponents was found.
        QT_QTHELP_FOUND          True if QtHelp was found.
        QT_QTMOTIF_FOUND        True if QtMotif was found.
        QT_QTMULTIMEDIA_FOUND    True if QtMultimedia was found (since Qt 4.6.0).
        QT_QTNETWORK_FOUND      True if QtNetwork was found.
        QT_QTNSPLUGIN_FOUND      True if QtNsPlugin was found.
        QT_QTOPENGL_FOUND        True if QtOpenGL was found.
        QT_QTSQL_FOUND          True if QtSql was found.
        QT_QTSVG_FOUND          True if QtSvg was found.
        QT_QTSCRIPT_FOUND        True if QtScript was found.
        QT_QTSCRIPTTOOLS_FOUND  True if QtScriptTools was found.
        QT_QTTEST_FOUND          True if QtTest was found.
        QT_QTUITOOLS_FOUND      True if QtUiTools was found.
        QT_QTWEBKIT_FOUND        True if QtWebKit was found.
        QT_QTXML_FOUND          True if QtXml was found.
        QT_QTXMLPATTERNS_FOUND  True if QtXmlPatterns was found.
        QT_PHONON_FOUND          True if phonon was found.
        QT_QTDECLARATIVE_FOUND  True if QtDeclarative was found.
 
     
 
        QT_MAC_USE_COCOA    For Mac OS X, its whether Cocoa or Carbon is used.
                            In general, this should not be used, but its useful
                            when having platform specific code.
 
     
 
        QT_DEFINITIONS  Definitions to use when compiling code that uses Qt.
                          You do not need to use this if you include QT_USE_FILE.
                          The QT_USE_FILE will also define QT_DEBUG and QT_NO_DEBUG
                          to fit your current build type.  Those are not contained
                          in QT_DEFINITIONS.
                       
        QT_INCLUDES      List of paths to all include directories of
                          Qt4 QT_INCLUDE_DIR and QT_QTCORE_INCLUDE_DIR are
                          always in this variable even if NOTFOUND,
                          all other INCLUDE_DIRS are
                          only added if they are found.
                          You do not need to use this if you include QT_USE_FILE.
         
 
     
 
        Include directories for the Qt modules are listed here.
        You do not need to use these variables if you include QT_USE_FILE.
 
     
 
        QT_INCLUDE_DIR              Path to "include" of Qt4
        QT_QT3SUPPORT_INCLUDE_DIR  Path to "include/Qt3Support"
        QT_QTASSISTANT_INCLUDE_DIR  Path to "include/QtAssistant"
        QT_QTASSISTANTCLIENT_INCLUDE_DIR      Path to "include/QtAssistant"
        QT_QAXCONTAINER_INCLUDE_DIR Path to "include/ActiveQt" (Windows only)
        QT_QAXSERVER_INCLUDE_DIR    Path to "include/ActiveQt" (Windows only)
        QT_QTCORE_INCLUDE_DIR      Path to "include/QtCore"       
        QT_QTDBUS_INCLUDE_DIR      Path to "include/QtDBus"
        QT_QTDESIGNER_INCLUDE_DIR  Path to "include/QtDesigner"
        QT_QTDESIGNERCOMPONENTS_INCLUDE_DIR  Path to "include/QtDesigner"
        QT_QTGUI_INCLUDE_DIR        Path to "include/QtGui"
        QT_QTHELP_INCLUDE_DIR      Path to "include/QtHelp"
        QT_QTMOTIF_INCLUDE_DIR      Path to "include/QtMotif"
        QT_QTMULTIMEDIA_INCLUDE_DIR Path to "include/QtMultimedia"
        QT_QTNETWORK_INCLUDE_DIR    Path to "include/QtNetwork"
        QT_QTNSPLUGIN_INCLUDE_DIR  Path to "include/QtNsPlugin"
        QT_QTOPENGL_INCLUDE_DIR    Path to "include/QtOpenGL"
        QT_QTSCRIPT_INCLUDE_DIR    Path to "include/QtScript"
        QT_QTSQL_INCLUDE_DIR        Path to "include/QtSql"
        QT_QTSVG_INCLUDE_DIR        Path to "include/QtSvg"
        QT_QTTEST_INCLUDE_DIR      Path to "include/QtTest"
        QT_QTWEBKIT_INCLUDE_DIR    Path to "include/QtWebKit"
        QT_QTXML_INCLUDE_DIR        Path to "include/QtXml"
        QT_QTXMLPATTERNS_INCLUDE_DIR  Path to "include/QtXmlPatterns"
        QT_PHONON_INCLUDE_DIR      Path to "include/phonon"
        QT_QTSCRIPTTOOLS_INCLUDE_DIR      Path to "include/QtScriptTools"
        QT_QTDECLARATIVE_INCLUDE_DIR      Path to "include/QtDeclarative"
 
     
 
        QT_BINARY_DIR              Path to "bin" of Qt4
        QT_LIBRARY_DIR              Path to "lib" of Qt4
        QT_PLUGINS_DIR              Path to "plugins" for Qt4
        QT_TRANSLATIONS_DIR        Path to "translations" of Qt4
        QT_DOC_DIR                  Path to "doc" of Qt4
        QT_MKSPECS_DIR              Path to "mkspecs" of Qt4
 
     
 
     
 
      The Qt toolkit may contain both debug and release libraries.  In that
      case, the following library variables will contain both.  You do not
      need to use these variables if you include QT_USE_FILE, and use
      QT_LIBRARIES.
 
        QT_QT3SUPPORT_LIBRARY            The Qt3Support library
        QT_QTASSISTANT_LIBRARY          The QtAssistant library
        QT_QTASSISTANTCLIENT_LIBRARY    The QtAssistantClient library
        QT_QAXCONTAINER_LIBRARY          The QAxContainer library (Windows only)
        QT_QAXSERVER_LIBRARY                The QAxServer library (Windows only)
        QT_QTCORE_LIBRARY                The QtCore library
        QT_QTDBUS_LIBRARY                The QtDBus library
        QT_QTDESIGNER_LIBRARY            The QtDesigner library
        QT_QTDESIGNERCOMPONENTS_LIBRARY  The QtDesignerComponents library
        QT_QTGUI_LIBRARY                The QtGui library
        QT_QTHELP_LIBRARY                The QtHelp library
        QT_QTMOTIF_LIBRARY              The QtMotif library
        QT_QTMULTIMEDIA_LIBRARY          The QtMultimedia library
        QT_QTNETWORK_LIBRARY            The QtNetwork library
        QT_QTNSPLUGIN_LIBRARY            The QtNsPLugin library
        QT_QTOPENGL_LIBRARY              The QtOpenGL library
        QT_QTSCRIPT_LIBRARY              The QtScript library
        QT_QTSQL_LIBRARY                The QtSql library
        QT_QTSVG_LIBRARY                The QtSvg library
        QT_QTTEST_LIBRARY                The QtTest library
        QT_QTUITOOLS_LIBRARY            The QtUiTools library
        QT_QTWEBKIT_LIBRARY              The QtWebKit library
        QT_QTXML_LIBRARY                The QtXml library
        QT_QTXMLPATTERNS_LIBRARY        The QtXmlPatterns library
        QT_QTMAIN_LIBRARY                The qtmain library for Windows
        QT_PHONON_LIBRARY                The phonon library
        QT_QTSCRIPTTOOLS_LIBRARY        The QtScriptTools library
       
 
      The QtDeclarative library: QT_QTDECLARATIVE_LIBRARY
 
      also defined, but NOT for general use are
 
        QT_MOC_EXECUTABLE                  Where to find the moc tool.
        QT_UIC_EXECUTABLE                  Where to find the uic tool.
        QT_UIC3_EXECUTABLE                  Where to find the uic3 tool.
        QT_RCC_EXECUTABLE                  Where to find the rcc tool
        QT_DBUSCPP2XML_EXECUTABLE          Where to find the qdbuscpp2xml tool.
        QT_DBUSXML2CPP_EXECUTABLE          Where to find the qdbusxml2cpp tool.
        QT_LUPDATE_EXECUTABLE              Where to find the lupdate tool.
        QT_LRELEASE_EXECUTABLE              Where to find the lrelease tool.
        QT_QCOLLECTIONGENERATOR_EXECUTABLE  Where to find the qcollectiongenerator tool.
        QT_DESIGNER_EXECUTABLE              Where to find the Qt designer tool.
        QT_LINGUIST_EXECUTABLE              Where to find the Qt linguist tool.
       
 
     
 
      These are around for backwards compatibility they will be set
 
        QT_WRAP_CPP  Set true if QT_MOC_EXECUTABLE is found
        QT_WRAP_UI  Set true if QT_UIC_EXECUTABLE is found
       
 
      These variables do _NOT_ have any effect anymore (compared to
      FindQt.cmake)
 
        QT_MT_REQUIRED        Qt4 is now always multithreaded
       
 
      These variables are set to "" Because Qt structure changed (They make
      no sense in Qt4)
 
        QT_QT_LIBRARY        Qt-Library is now split
 
 
  FindQuickTime
       
 
      Locate QuickTime This module defines QUICKTIME_LIBRARY
      QUICKTIME_FOUND, if false, do not try to link to gdal
      QUICKTIME_INCLUDE_DIR, where to find the headers
 
      $QUICKTIME_DIR is an environment variable that would correspond to the
      ./configure --prefix=$QUICKTIME_DIR
 
      Created by Eric Wing.
 
  FindRTI
      Try to find M&S HLA RTI libraries
 
      This module finds if any HLA RTI is installed and locates the standard
      RTI include files and libraries.
 
      RTI is a simulation infrastructure standardized by IEEE and SISO.  It
      has a well defined C++ API that assures that simulation applications
      are independent on a particular RTI implementation.
 
        http://en.wikipedia.org/wiki/Run-Time_Infrastructure_(simulation)
 
     
 
      This code sets the following variables:
 
        RTI_INCLUDE_DIR = the directory where RTI includes file are found
        RTI_LIBRARIES = The libraries to link against to use RTI
        RTI_DEFINITIONS = -DRTI_USES_STD_FSTREAM
        RTI_FOUND = Set to FALSE if any HLA RTI was not found
 
     
 
      Report problems to <certi-devel@nongnu.org>
 
  FindRuby
      Find Ruby
 
      This module finds if Ruby is installed and determines where the
      include files and libraries are.  Ruby 1.8 and 1.9 are supported.  The
      minimum required version specified in the find_package() command is
      honored.  It also determines what the name of the library is.  This
      code sets the following variables:
 
        RUBY_EXECUTABLE  = full path to the ruby binary
        RUBY_INCLUDE_DIRS = include dirs to be used when using the ruby library
        RUBY_LIBRARY      = full path to the ruby library
        RUBY_VERSION      = the version of ruby which was found, e.g. "1.8.7"
        RUBY_FOUND        = set to true if ruby ws found successfully
 
     
 
        RUBY_INCLUDE_PATH = same as RUBY_INCLUDE_DIRS, only provided for compatibility reasons, don't use it
 
 
  FindSDL
       
 
      Locate SDL library This module defines SDL_LIBRARY, the name of the
      library to link against SDL_FOUND, if false, do not try to link to SDL
      SDL_INCLUDE_DIR, where to find SDL.h
 
      This module responds to the the flag: SDL_BUILDING_LIBRARY If this is
      defined, then no SDL_main will be linked in because only applications
      need main().  Otherwise, it is assumed you are building an application
      and this module will attempt to locate and set the the proper link
      flags as part of the returned SDL_LIBRARY variable.
 
      Don't forget to include SDLmain.h and SDLmain.m your project for the
      OS X framework based version.  (Other versions link to -lSDLmain which
      this module will try to find on your behalf.) Also for OS X, this
      module will automatically add the -framework Cocoa on your behalf.
 
     
 
      Additional Note: If you see an empty SDL_LIBRARY_TEMP in your
      configuration and no SDL_LIBRARY, it means CMake did not find your SDL
      library (SDL.dll, libsdl.so, SDL.framework, etc).  Set
      SDL_LIBRARY_TEMP to point to your SDL library, and configure again.
      Similarly, if you see an empty SDLMAIN_LIBRARY, you should set this
      value as appropriate.  These values are used to generate the final
      SDL_LIBRARY variable, but when these values are unset, SDL_LIBRARY
      does not get created.
 
     
 
      $SDLDIR is an environment variable that would correspond to the
      ./configure --prefix=$SDLDIR used in building SDL.  l.e.galup 9-20-02
 
      Modified by Eric Wing.  Added code to assist with automated building
      by using environmental variables and providing a more
      controlled/consistent search behavior.  Added new modifications to
      recognize OS X frameworks and additional Unix paths (FreeBSD, etc).
      Also corrected the header search path to follow "proper" SDL
      guidelines.  Added a search for SDLmain which is needed by some
      platforms.  Added a search for threads which is needed by some
      platforms.  Added needed compile switches for MinGW.
 
      On OSX, this will prefer the Framework version (if found) over others.
      People will have to manually change the cache values of SDL_LIBRARY to
      override this selection or set the CMake environment
      CMAKE_INCLUDE_PATH to modify the search paths.
 
      Note that the header path has changed from SDL/SDL.h to just SDL.h
      This needed to change because "proper" SDL convention is #include
      "SDL.h", not <SDL/SDL.h>.  This is done for portability reasons
      because not all systems place things in SDL/ (see FreeBSD).
 
  FindSDL_image
       
 
      Locate SDL_image library This module defines SDLIMAGE_LIBRARY, the
      name of the library to link against SDLIMAGE_FOUND, if false, do not
      try to link to SDL SDLIMAGE_INCLUDE_DIR, where to find SDL/SDL.h
 
      $SDLDIR is an environment variable that would correspond to the
      ./configure --prefix=$SDLDIR used in building SDL.
 
      Created by Eric Wing.  This was influenced by the FindSDL.cmake
      module, but with modifications to recognize OS X frameworks and
      additional Unix paths (FreeBSD, etc).
 
  FindSDL_mixer
       
 
      Locate SDL_mixer library This module defines SDLMIXER_LIBRARY, the
      name of the library to link against SDLMIXER_FOUND, if false, do not
      try to link to SDL SDLMIXER_INCLUDE_DIR, where to find SDL/SDL.h
 
      $SDLDIR is an environment variable that would correspond to the
      ./configure --prefix=$SDLDIR used in building SDL.
 
      Created by Eric Wing.  This was influenced by the FindSDL.cmake
      module, but with modifications to recognize OS X frameworks and
      additional Unix paths (FreeBSD, etc).
 
  FindSDL_net
       
 
      Locate SDL_net library This module defines SDLNET_LIBRARY, the name of
      the library to link against SDLNET_FOUND, if false, do not try to link
      against SDLNET_INCLUDE_DIR, where to find the headers
 
      $SDLDIR is an environment variable that would correspond to the
      ./configure --prefix=$SDLDIR used in building SDL.
 
      Created by Eric Wing.  This was influenced by the FindSDL.cmake
      module, but with modifications to recognize OS X frameworks and
      additional Unix paths (FreeBSD, etc).
 
  FindSDL_sound
       
 
      Locates the SDL_sound library
 
  FindSDL_ttf
       
 
      Locate SDL_ttf library This module defines SDLTTF_LIBRARY, the name of
      the library to link against SDLTTF_FOUND, if false, do not try to link
      to SDL SDLTTF_INCLUDE_DIR, where to find SDL/SDL.h
 
      $SDLDIR is an environment variable that would correspond to the
      ./configure --prefix=$SDLDIR used in building SDL.
 
      Created by Eric Wing.  This was influenced by the FindSDL.cmake
      module, but with modifications to recognize OS X frameworks and
      additional Unix paths (FreeBSD, etc).
 
  FindSWIG
      Find SWIG
 
      This module finds an installed SWIG.  It sets the following variables:
 
        SWIG_FOUND - set to true if SWIG is found
        SWIG_DIR - the directory where swig is installed
        SWIG_EXECUTABLE - the path to the swig executable
        SWIG_VERSION  - the version number of the swig executable
 
     
 
      All informations are collected from the SWIG_EXECUTABLE so the version
      to be found can be changed from the command line by means of setting
      SWIG_EXECUTABLE
 
 
  FindSelfPackers
      Find upx
 
      This module looks for some executable packers (i.e.  softwares that
      compress executables or shared libs into on-the-fly self-extracting
      executables or shared libs.  Examples:
 
        UPX: http://wildsau.idv.uni-linz.ac.at/mfx/upx.html
 
 
  FindSquish
      -- Typical Use
 
     
 
      This module can be used to find Squish (currently support is aimed at
      version 3).
 
        SQUISH_FOUND                    If false, don't try to use Squish
        SQUISH_VERSION_MAJOR            The major version of Squish found
        SQUISH_VERSION_MINOR            The minor version of Squish found
        SQUISH_VERSION_PATCH            The patch version of Squish found
 
     
 
        SQUISH_INSTALL_DIR              The Squish installation directory (containing bin, lib, etc)
        SQUISH_SERVER_EXECUTABLE        The squishserver executable
        SQUISH_CLIENT_EXECUTABLE        The squishrunner executable
 
     
 
        SQUISH_INSTALL_DIR_FOUND        Was the install directory found?
        SQUISH_SERVER_EXECUTABLE_FOUND  Was the server executable found?
        SQUISH_CLIENT_EXECUTABLE_FOUND  Was the client executable found?
 
     
 
      macro SQUISH_ADD_TEST(testName applicationUnderTest testSuite
      testCase)
 
        ENABLE_TESTING()
        FIND_PACKAGE(Squish)
        IF (SQUISH_FOUND)
          SQUISH_ADD_TEST(myTestName myApplication testSuiteName testCaseName)
        ENDIF (SQUISH_FOUND)
 
     
 
 
  FindSubversion
      Extract information from a subversion working copy
 
      The module defines the following variables:
 
        Subversion_SVN_EXECUTABLE - path to svn command line client
        Subversion_VERSION_SVN - version of svn command line client
        Subversion_FOUND - true if the command line client was found
 
      If the command line client executable is found the macro
 
        Subversion_WC_INFO(<dir> <var-prefix>)
 
      is defined to extract information of a subversion working copy at a
      given location.  The macro defines the following variables:
 
        <var-prefix>_WC_URL - url of the repository (at <dir>)
        <var-prefix>_WC_ROOT - root url of the repository
        <var-prefix>_WC_REVISION - current revision
        <var-prefix>_WC_LAST_CHANGED_AUTHOR - author of last commit
        <var-prefix>_WC_LAST_CHANGED_DATE - date of last commit
        <var-prefix>_WC_LAST_CHANGED_REV - revision of last commit
        <var-prefix>_WC_LAST_CHANGED_LOG - last log of base revision
        <var-prefix>_WC_INFO - output of command `svn info <dir>'
 
      Example usage:
 
        FIND_PACKAGE(Subversion)
        IF(Subversion_FOUND)
          Subversion_WC_INFO(${PROJECT_SOURCE_DIR} Project)
          MESSAGE("Current revision is ${Project_WC_REVISION}")
          Subversion_WC_LOG(${PROJECT_SOURCE_DIR} Project)
          MESSAGE("Last changed log is ${Project_LAST_CHANGED_LOG}")
        ENDIF(Subversion_FOUND)
 
 
  FindTCL
      TK_INTERNAL_PATH was removed.
 
      This module finds if Tcl is installed and determines where the include
      files and libraries are.  It also determines what the name of the
      library is.  This code sets the following variables:
 
        TCL_FOUND              = Tcl was found
        TK_FOUND              = Tk was found
        TCLTK_FOUND            = Tcl and Tk were found
        TCL_LIBRARY            = path to Tcl library (tcl tcl80)
        TCL_INCLUDE_PATH      = path to where tcl.h can be found
        TCL_TCLSH              = path to tclsh binary (tcl tcl80)
        TK_LIBRARY            = path to Tk library (tk tk80 etc)
        TK_INCLUDE_PATH        = path to where tk.h can be found
        TK_WISH                = full path to the wish executable
 
     
 
      In an effort to remove some clutter and clear up some issues for
      people who are not necessarily Tcl/Tk gurus/developpers, some
      variables were moved or removed.  Changes compared to CMake 2.4 are:
 
          => they were only useful for people writing Tcl/Tk extensions.
          => these libs are not packaged by default with Tcl/Tk distributions.
            Even when Tcl/Tk is built from source, several flavors of debug libs
            are created and there is no real reason to pick a single one
            specifically (say, amongst tcl84g, tcl84gs, or tcl84sgx).
            Let's leave that choice to the user by allowing him to assign
            TCL_LIBRARY to any Tcl library, debug or not.
          => this ended up being only a Win32 variable, and there is a lot of
            confusion regarding the location of this file in an installed Tcl/Tk
            tree anyway (see 8.5 for example). If you need the internal path at
            this point it is safer you ask directly where the *source* tree is
            and dig from there.
 
 
  FindTIFF
      Find TIFF library
 
      Find the native TIFF includes and library This module defines
 
        TIFF_INCLUDE_DIR, where to find tiff.h, etc.
        TIFF_LIBRARIES, libraries to link against to use TIFF.
        TIFF_FOUND, If false, do not try to use TIFF.
 
      also defined, but not for general use are
 
        TIFF_LIBRARY, where to find the TIFF library.
 
 
  FindTclStub
      TCL_STUB_LIBRARY_DEBUG and TK_STUB_LIBRARY_DEBUG were removed.
 
      This module finds Tcl stub libraries.  It first finds Tcl include
      files and libraries by calling FindTCL.cmake.  How to Use the Tcl
      Stubs Library:
 
          http://tcl.activestate.com/doc/howto/stubs.html
 
      Using Stub Libraries:
 
          http://safari.oreilly.com/0130385603/ch48lev1sec3
 
      This code sets the following variables:
 
        TCL_STUB_LIBRARY      = path to Tcl stub library
        TK_STUB_LIBRARY        = path to Tk stub library
        TTK_STUB_LIBRARY      = path to ttk stub library
 
     
 
      In an effort to remove some clutter and clear up some issues for
      people who are not necessarily Tcl/Tk gurus/developpers, some
      variables were moved or removed.  Changes compared to CMake 2.4 are:
 
          => these libs are not packaged by default with Tcl/Tk distributions.
            Even when Tcl/Tk is built from source, several flavors of debug libs
            are created and there is no real reason to pick a single one
            specifically (say, amongst tclstub84g, tclstub84gs, or tclstub84sgx).
            Let's leave that choice to the user by allowing him to assign
            TCL_STUB_LIBRARY to any Tcl library, debug or not.
 
 
  FindTclsh
      Find tclsh
 
      This module finds if TCL is installed and determines where the include
      files and libraries are.  It also determines what the name of the
      library is.  This code sets the following variables:
 
        TCLSH_FOUND = TRUE if tclsh has been found
        TCL_TCLSH = the path to the tclsh executable
 
      In cygwin, look for the cygwin version first.  Don't look for it later
      to avoid finding the cygwin version on a Win32 build.
 
  FindThreads
      This module determines the thread library of the system.
 
      The following variables are set
 
        CMAKE_THREAD_LIBS_INIT    - the thread library
        CMAKE_USE_SPROC_INIT      - are we using sproc?
        CMAKE_USE_WIN32_THREADS_INIT - using WIN32 threads?
        CMAKE_USE_PTHREADS_INIT    - are we using pthreads
        CMAKE_HP_PTHREADS_INIT    - are we using hp pthreads
 
      For systems with multiple thread libraries, caller can set
 
        CMAKE_THREAD_PREFER_PTHREADS
 
 
  FindUnixCommands
      Find unix commands from cygwin
 
      This module looks for some usual Unix commands.
 
 
  FindVTK
      Find a VTK installation or build tree.
 
      The following variables are set if VTK is found.  If VTK is not found,
      VTK_FOUND is set to false.
 
        VTK_FOUND        - Set to true when VTK is found.
        VTK_USE_FILE      - CMake file to use VTK.
        VTK_MAJOR_VERSION - The VTK major version number.
        VTK_MINOR_VERSION - The VTK minor version number
                              (odd non-release).
        VTK_BUILD_VERSION - The VTK patch level
                              (meaningless for odd minor).
        VTK_INCLUDE_DIRS  - Include directories for VTK
        VTK_LIBRARY_DIRS  - Link directories for VTK libraries
        VTK_KITS          - List of VTK kits, in CAPS
                            (COMMON,IO,) etc.
        VTK_LANGUAGES    - List of wrapped languages, in CAPS
                            (TCL, PYHTON,) etc.
 
      The following cache entries must be set by the user to locate VTK:
 
        VTK_DIR  - The directory containing VTKConfig.cmake. 
                    This is either the root of the build tree,
                    or the lib/vtk directory.  This is the
                    only cache entry.
 
      The following variables are set for backward compatibility and should
      not be used in new code:
 
        USE_VTK_FILE - The full path to the UseVTK.cmake file.
                        This is provided for backward
                        compatibility.  Use VTK_USE_FILE
                        instead.
 
     
 
 
  FindWget
      Find wget
 
      This module looks for wget.  This module defines the following values:
 
        WGET_EXECUTABLE: the full path to the wget tool.
        WGET_FOUND: True if wget has been found.
 
 
  FindWish
      Find wish installation
 
      This module finds if TCL is installed and determines where the include
      files and libraries are.  It also determines what the name of the
      library is.  This code sets the following variables:
 
        TK_WISH = the path to the wish executable
 
     
 
      if UNIX is defined, then it will look for the cygwin version first
 
  FindX11
      Find X11 installation
 
      Try to find X11 on UNIX systems.  The following values are defined
 
        X11_FOUND        - True if X11 is available
        X11_INCLUDE_DIR  - include directories to use X11
        X11_LIBRARIES    - link against these to use X11
 
     
 
      and also the following more fine grained variables: Include paths:
      X11_ICE_INCLUDE_PATH, X11_ICE_LIB, X11_ICE_FOUND
 
                      X11_X11_INCLUDE_PATH,          X11_X11_LIB
                      X11_Xaccessrules_INCLUDE_PATH,                    X11_Xaccess_FOUND
                      X11_Xaccessstr_INCLUDE_PATH,                      X11_Xaccess_FOUND
                      X11_Xau_INCLUDE_PATH,          X11_Xau_LIB,        X11_Xau_FOUND
                      X11_Xcomposite_INCLUDE_PATH,  X11_Xcomposite_LIB, X11_Xcomposite_FOUND
                      X11_Xcursor_INCLUDE_PATH,      X11_Xcursor_LIB,    X11_Xcursor_FOUND
                      X11_Xdamage_INCLUDE_PATH,      X11_Xdamage_LIB,    X11_Xdamage_FOUND
                      X11_Xdmcp_INCLUDE_PATH,        X11_Xdmcp_LIB,      X11_Xdmcp_FOUND
                                                      X11_Xext_LIB,      X11_Xext_FOUND
                      X11_dpms_INCLUDE_PATH,        (in X11_Xext_LIB),  X11_dpms_FOUND
                      X11_XShm_INCLUDE_PATH,        (in X11_Xext_LIB),  X11_XShm_FOUND
                      X11_Xshape_INCLUDE_PATH,      (in X11_Xext_LIB),  X11_Xshape_FOUND
                      X11_xf86misc_INCLUDE_PATH,    X11_Xxf86misc_LIB,  X11_xf86misc_FOUND
                      X11_xf86vmode_INCLUDE_PATH,                        X11_xf86vmode_FOUND
                      X11_Xfixes_INCLUDE_PATH,      X11_Xfixes_LIB,    X11_Xfixes_FOUND
                      X11_Xft_INCLUDE_PATH,          X11_Xft_LIB,        X11_Xft_FOUND
                      X11_Xi_INCLUDE_PATH,          X11_Xi_LIB,        X11_Xi_FOUND
                      X11_Xinerama_INCLUDE_PATH,    X11_Xinerama_LIB,  X11_Xinerama_FOUND
                      X11_Xinput_INCLUDE_PATH,      X11_Xinput_LIB,    X11_Xinput_FOUND
                      X11_Xkb_INCLUDE_PATH,                              X11_Xkb_FOUND
                      X11_Xkblib_INCLUDE_PATH,                          X11_Xkb_FOUND
                      X11_Xpm_INCLUDE_PATH,          X11_Xpm_LIB,        X11_Xpm_FOUND
                      X11_XTest_INCLUDE_PATH,        X11_XTest_LIB,      X11_XTest_FOUND
                      X11_Xrandr_INCLUDE_PATH,      X11_Xrandr_LIB,    X11_Xrandr_FOUND
                      X11_Xrender_INCLUDE_PATH,      X11_Xrender_LIB,    X11_Xrender_FOUND
                      X11_Xscreensaver_INCLUDE_PATH, X11_Xscreensaver_LIB, X11_Xscreensaver_FOUND
                      X11_Xt_INCLUDE_PATH,          X11_Xt_LIB,        X11_Xt_FOUND
                      X11_Xutil_INCLUDE_PATH,                            X11_Xutil_FOUND
                      X11_Xv_INCLUDE_PATH,          X11_Xv_LIB,        X11_Xv_FOUND
 
 
  FindXMLRPC
      Find xmlrpc
 
      Find the native XMLRPC headers and libraries.
 
        XMLRPC_INCLUDE_DIRS      - where to find xmlrpc.h, etc.
        XMLRPC_LIBRARIES        - List of libraries when using xmlrpc.
        XMLRPC_FOUND            - True if xmlrpc found.
 
      XMLRPC modules may be specified as components for this find module.
      Modules may be listed by running "xmlrpc-c-config".  Modules include:
 
        c++            C++ wrapper code
        libwww-client  libwww-based client
        cgi-server    CGI-based server
        abyss-server  ABYSS-based server
 
      Typical usage:
 
        FIND_PACKAGE(XMLRPC REQUIRED libwww-client)
 
 
  FindZLIB
      Find zlib
 
      Find the native ZLIB includes and library
 
        ZLIB_INCLUDE_DIRS  - where to find zlib.h, etc.
        ZLIB_LIBRARIES      - List of libraries when using zlib.
        ZLIB_FOUND          - True if zlib found.
 
     
 
        ZLIB_VERSION_STRING - The version of zlib found (x.y.z)
        ZLIB_MAJOR_VERSION  - the major version of zlib
        ZLIB_MINOR_VERSION  - The minor version of zlib
        ZLIB_PATCH_VERSION  - The patch version of zlib
 
 
  Findosg
       
 
     
 
      NOTE: It is highly recommended that you use the new
      FindOpenSceneGraph.cmake introduced in CMake 2.6.3 and not use this
      Find module directly.
 
      This is part of the Findosg* suite used to find OpenSceneGraph
      components.  Each component is separate and you must opt in to each
      module.  You must also opt into OpenGL and OpenThreads (and Producer
      if needed) as these modules won't do it for you.  This is to allow you
      control over your own system piece by piece in case you need to opt
      out of certain components or change the Find behavior for a particular
      module (perhaps because the default FindOpenGL.cmake module doesn't
      work with your system as an example).  If you want to use a more
      convenient module that includes everything, use the
      FindOpenSceneGraph.cmake instead of the Findosg*.cmake modules.
 
      Locate osg This module defines
 
      OSG_FOUND - Was the Osg found? OSG_INCLUDE_DIR - Where to find the
      headers OSG_LIBRARIES - The libraries to link against for the OSG (use
      this)
 
      OSG_LIBRARY - The OSG library OSG_LIBRARY_DEBUG - The OSG debug
      library
 
      $OSGDIR is an environment variable that would correspond to the
      ./configure --prefix=$OSGDIR used in building osg.
 
      Created by Eric Wing.
 
  FindosgAnimation
       
 
      This is part of the Findosg* suite used to find OpenSceneGraph
      components.  Each component is separate and you must opt in to each
      module.  You must also opt into OpenGL and OpenThreads (and Producer
      if needed) as these modules won't do it for you.  This is to allow you
      control over your own system piece by piece in case you need to opt
      out of certain components or change the Find behavior for a particular
      module (perhaps because the default FindOpenGL.cmake module doesn't
      work with your system as an example).  If you want to use a more
      convenient module that includes everything, use the
      FindOpenSceneGraph.cmake instead of the Findosg*.cmake modules.
 
      Locate osgAnimation This module defines
 
      OSGANIMATION_FOUND - Was osgAnimation found? OSGANIMATION_INCLUDE_DIR
      - Where to find the headers OSGANIMATION_LIBRARIES - The libraries to
      link against for the OSG (use this)
 
      OSGANIMATION_LIBRARY - The OSG library OSGANIMATION_LIBRARY_DEBUG -
      The OSG debug library
 
      $OSGDIR is an environment variable that would correspond to the
      ./configure --prefix=$OSGDIR used in building osg.
 
      Created by Eric Wing.
 
  FindosgDB
       
 
      This is part of the Findosg* suite used to find OpenSceneGraph
      components.  Each component is separate and you must opt in to each
      module.  You must also opt into OpenGL and OpenThreads (and Producer
      if needed) as these modules won't do it for you.  This is to allow you
      control over your own system piece by piece in case you need to opt
      out of certain components or change the Find behavior for a particular
      module (perhaps because the default FindOpenGL.cmake module doesn't
      work with your system as an example).  If you want to use a more
      convenient module that includes everything, use the
      FindOpenSceneGraph.cmake instead of the Findosg*.cmake modules.
 
      Locate osgDB This module defines
 
      OSGDB_FOUND - Was osgDB found? OSGDB_INCLUDE_DIR - Where to find the
      headers OSGDB_LIBRARIES - The libraries to link against for the osgDB
      (use this)
 
      OSGDB_LIBRARY - The osgDB library OSGDB_LIBRARY_DEBUG - The osgDB
      debug library
 
      $OSGDIR is an environment variable that would correspond to the
      ./configure --prefix=$OSGDIR used in building osg.
 
      Created by Eric Wing.
 
  FindosgFX
       
 
      This is part of the Findosg* suite used to find OpenSceneGraph
      components.  Each component is separate and you must opt in to each
      module.  You must also opt into OpenGL and OpenThreads (and Producer
      if needed) as these modules won't do it for you.  This is to allow you
      control over your own system piece by piece in case you need to opt
      out of certain components or change the Find behavior for a particular
      module (perhaps because the default FindOpenGL.cmake module doesn't
      work with your system as an example).  If you want to use a more
      convenient module that includes everything, use the
      FindOpenSceneGraph.cmake instead of the Findosg*.cmake modules.
 
      Locate osgFX This module defines
 
      OSGFX_FOUND - Was osgFX found? OSGFX_INCLUDE_DIR - Where to find the
      headers OSGFX_LIBRARIES - The libraries to link against for the osgFX
      (use this)
 
      OSGFX_LIBRARY - The osgFX library OSGFX_LIBRARY_DEBUG - The osgFX
      debug library
 
      $OSGDIR is an environment variable that would correspond to the
      ./configure --prefix=$OSGDIR used in building osg.
 
      Created by Eric Wing.
 
  FindosgGA
       
 
      This is part of the Findosg* suite used to find OpenSceneGraph
      components.  Each component is separate and you must opt in to each
      module.  You must also opt into OpenGL and OpenThreads (and Producer
      if needed) as these modules won't do it for you.  This is to allow you
      control over your own system piece by piece in case you need to opt
      out of certain components or change the Find behavior for a particular
      module (perhaps because the default FindOpenGL.cmake module doesn't
      work with your system as an example).  If you want to use a more
      convenient module that includes everything, use the
      FindOpenSceneGraph.cmake instead of the Findosg*.cmake modules.
 
      Locate osgGA This module defines
 
      OSGGA_FOUND - Was osgGA found? OSGGA_INCLUDE_DIR - Where to find the
      headers OSGGA_LIBRARIES - The libraries to link against for the osgGA
      (use this)
 
      OSGGA_LIBRARY - The osgGA library OSGGA_LIBRARY_DEBUG - The osgGA
      debug library
 
      $OSGDIR is an environment variable that would correspond to the
      ./configure --prefix=$OSGDIR used in building osg.
 
      Created by Eric Wing.
 
  FindosgIntrospection
       
 
      This is part of the Findosg* suite used to find OpenSceneGraph
      components.  Each component is separate and you must opt in to each
      module.  You must also opt into OpenGL and OpenThreads (and Producer
      if needed) as these modules won't do it for you.  This is to allow you
      control over your own system piece by piece in case you need to opt
      out of certain components or change the Find behavior for a particular
      module (perhaps because the default FindOpenGL.cmake module doesn't
      work with your system as an example).  If you want to use a more
      convenient module that includes everything, use the
      FindOpenSceneGraph.cmake instead of the Findosg*.cmake modules.
 
      Locate osgINTROSPECTION This module defines
 
      OSGINTROSPECTION_FOUND - Was osgIntrospection found?
      OSGINTROSPECTION_INCLUDE_DIR - Where to find the headers
      OSGINTROSPECTION_LIBRARIES - The libraries to link for
      osgIntrospection (use this)
 
      OSGINTROSPECTION_LIBRARY - The osgIntrospection library
      OSGINTROSPECTION_LIBRARY_DEBUG - The osgIntrospection debug library
 
      $OSGDIR is an environment variable that would correspond to the
      ./configure --prefix=$OSGDIR used in building osg.
 
      Created by Eric Wing.
 
  FindosgManipulator
       
 
      This is part of the Findosg* suite used to find OpenSceneGraph
      components.  Each component is separate and you must opt in to each
      module.  You must also opt into OpenGL and OpenThreads (and Producer
      if needed) as these modules won't do it for you.  This is to allow you
      control over your own system piece by piece in case you need to opt
      out of certain components or change the Find behavior for a particular
      module (perhaps because the default FindOpenGL.cmake module doesn't
      work with your system as an example).  If you want to use a more
      convenient module that includes everything, use the
      FindOpenSceneGraph.cmake instead of the Findosg*.cmake modules.
 
      Locate osgManipulator This module defines
 
      OSGMANIPULATOR_FOUND - Was osgManipulator found?
      OSGMANIPULATOR_INCLUDE_DIR - Where to find the headers
      OSGMANIPULATOR_LIBRARIES - The libraries to link for osgManipulator
      (use this)
 
      OSGMANIPULATOR_LIBRARY - The osgManipulator library
      OSGMANIPULATOR_LIBRARY_DEBUG - The osgManipulator debug library
 
      $OSGDIR is an environment variable that would correspond to the
      ./configure --prefix=$OSGDIR used in building osg.
 
      Created by Eric Wing.
 
  FindosgParticle
       
 
      This is part of the Findosg* suite used to find OpenSceneGraph
      components.  Each component is separate and you must opt in to each
      module.  You must also opt into OpenGL and OpenThreads (and Producer
      if needed) as these modules won't do it for you.  This is to allow you
      control over your own system piece by piece in case you need to opt
      out of certain components or change the Find behavior for a particular
      module (perhaps because the default FindOpenGL.cmake module doesn't
      work with your system as an example).  If you want to use a more
      convenient module that includes everything, use the
      FindOpenSceneGraph.cmake instead of the Findosg*.cmake modules.
 
      Locate osgParticle This module defines
 
      OSGPARTICLE_FOUND - Was osgParticle found? OSGPARTICLE_INCLUDE_DIR -
      Where to find the headers OSGPARTICLE_LIBRARIES - The libraries to
      link for osgParticle (use this)
 
      OSGPARTICLE_LIBRARY - The osgParticle library
      OSGPARTICLE_LIBRARY_DEBUG - The osgParticle debug library
 
      $OSGDIR is an environment variable that would correspond to the
      ./configure --prefix=$OSGDIR used in building osg.
 
      Created by Eric Wing.
 
  FindosgProducer
       
 
      This is part of the Findosg* suite used to find OpenSceneGraph
      components.  Each component is separate and you must opt in to each
      module.  You must also opt into OpenGL and OpenThreads (and Producer
      if needed) as these modules won't do it for you.  This is to allow you
      control over your own system piece by piece in case you need to opt
      out of certain components or change the Find behavior for a particular
      module (perhaps because the default FindOpenGL.cmake module doesn't
      work with your system as an example).  If you want to use a more
      convenient module that includes everything, use the
      FindOpenSceneGraph.cmake instead of the Findosg*.cmake modules.
 
      Locate osgProducer This module defines
 
      OSGPRODUCER_FOUND - Was osgProducer found? OSGPRODUCER_INCLUDE_DIR -
      Where to find the headers OSGPRODUCER_LIBRARIES - The libraries to
      link for osgProducer (use this)
 
      OSGPRODUCER_LIBRARY - The osgProducer library
      OSGPRODUCER_LIBRARY_DEBUG - The osgProducer debug library
 
      $OSGDIR is an environment variable that would correspond to the
      ./configure --prefix=$OSGDIR used in building osg.
 
      Created by Eric Wing.
 
  FindosgShadow
       
 
      This is part of the Findosg* suite used to find OpenSceneGraph
      components.  Each component is separate and you must opt in to each
      module.  You must also opt into OpenGL and OpenThreads (and Producer
      if needed) as these modules won't do it for you.  This is to allow you
      control over your own system piece by piece in case you need to opt
      out of certain components or change the Find behavior for a particular
      module (perhaps because the default FindOpenGL.cmake module doesn't
      work with your system as an example).  If you want to use a more
      convenient module that includes everything, use the
      FindOpenSceneGraph.cmake instead of the Findosg*.cmake modules.
 
      Locate osgShadow This module defines
 
      OSGSHADOW_FOUND - Was osgShadow found? OSGSHADOW_INCLUDE_DIR - Where
      to find the headers OSGSHADOW_LIBRARIES - The libraries to link for
      osgShadow (use this)
 
      OSGSHADOW_LIBRARY - The osgShadow library OSGSHADOW_LIBRARY_DEBUG -
      The osgShadow debug library
 
      $OSGDIR is an environment variable that would correspond to the
      ./configure --prefix=$OSGDIR used in building osg.
 
      Created by Eric Wing.
 
  FindosgSim
       
 
      This is part of the Findosg* suite used to find OpenSceneGraph
      components.  Each component is separate and you must opt in to each
      module.  You must also opt into OpenGL and OpenThreads (and Producer
      if needed) as these modules won't do it for you.  This is to allow you
      control over your own system piece by piece in case you need to opt
      out of certain components or change the Find behavior for a particular
      module (perhaps because the default FindOpenGL.cmake module doesn't
      work with your system as an example).  If you want to use a more
      convenient module that includes everything, use the
      FindOpenSceneGraph.cmake instead of the Findosg*.cmake modules.
 
      Locate osgSim This module defines
 
      OSGSIM_FOUND - Was osgSim found? OSGSIM_INCLUDE_DIR - Where to find
      the headers OSGSIM_LIBRARIES - The libraries to link for osgSim (use
      this)
 
      OSGSIM_LIBRARY - The osgSim library OSGSIM_LIBRARY_DEBUG - The osgSim
      debug library
 
      $OSGDIR is an environment variable that would correspond to the
      ./configure --prefix=$OSGDIR used in building osg.
 
      Created by Eric Wing.
 
  FindosgTerrain
       
 
      This is part of the Findosg* suite used to find OpenSceneGraph
      components.  Each component is separate and you must opt in to each
      module.  You must also opt into OpenGL and OpenThreads (and Producer
      if needed) as these modules won't do it for you.  This is to allow you
      control over your own system piece by piece in case you need to opt
      out of certain components or change the Find behavior for a particular
      module (perhaps because the default FindOpenGL.cmake module doesn't
      work with your system as an example).  If you want to use a more
      convenient module that includes everything, use the
      FindOpenSceneGraph.cmake instead of the Findosg*.cmake modules.
 
      Locate osgTerrain This module defines
 
      OSGTERRAIN_FOUND - Was osgTerrain found? OSGTERRAIN_INCLUDE_DIR -
      Where to find the headers OSGTERRAIN_LIBRARIES - The libraries to link
      for osgTerrain (use this)
 
      OSGTERRAIN_LIBRARY - The osgTerrain library OSGTERRAIN_LIBRARY_DEBUG -
      The osgTerrain debug library
 
      $OSGDIR is an environment variable that would correspond to the
      ./configure --prefix=$OSGDIR used in building osg.
 
      Created by Eric Wing.
 
  FindosgText
       
 
      This is part of the Findosg* suite used to find OpenSceneGraph
      components.  Each component is separate and you must opt in to each
      module.  You must also opt into OpenGL and OpenThreads (and Producer
      if needed) as these modules won't do it for you.  This is to allow you
      control over your own system piece by piece in case you need to opt
      out of certain components or change the Find behavior for a particular
      module (perhaps because the default FindOpenGL.cmake module doesn't
      work with your system as an example).  If you want to use a more
      convenient module that includes everything, use the
      FindOpenSceneGraph.cmake instead of the Findosg*.cmake modules.
 
      Locate osgText This module defines
 
      OSGTEXT_FOUND - Was osgText found? OSGTEXT_INCLUDE_DIR - Where to find
      the headers OSGTEXT_LIBRARIES - The libraries to link for osgText (use
      this)
 
      OSGTEXT_LIBRARY - The osgText library OSGTEXT_LIBRARY_DEBUG - The
      osgText debug library
 
      $OSGDIR is an environment variable that would correspond to the
      ./configure --prefix=$OSGDIR used in building osg.
 
      Created by Eric Wing.
 
  FindosgUtil
       
 
      This is part of the Findosg* suite used to find OpenSceneGraph
      components.  Each component is separate and you must opt in to each
      module.  You must also opt into OpenGL and OpenThreads (and Producer
      if needed) as these modules won't do it for you.  This is to allow you
      control over your own system piece by piece in case you need to opt
      out of certain components or change the Find behavior for a particular
      module (perhaps because the default FindOpenGL.cmake module doesn't
      work with your system as an example).  If you want to use a more
      convenient module that includes everything, use the
      FindOpenSceneGraph.cmake instead of the Findosg*.cmake modules.
 
      Locate osgUtil This module defines
 
      OSGUTIL_FOUND - Was osgUtil found? OSGUTIL_INCLUDE_DIR - Where to find
      the headers OSGUTIL_LIBRARIES - The libraries to link for osgUtil (use
      this)
 
      OSGUTIL_LIBRARY - The osgUtil library OSGUTIL_LIBRARY_DEBUG - The
      osgUtil debug library
 
      $OSGDIR is an environment variable that would correspond to the
      ./configure --prefix=$OSGDIR used in building osg.
 
      Created by Eric Wing.
 
  FindosgViewer
       
 
      This is part of the Findosg* suite used to find OpenSceneGraph
      components.  Each component is separate and you must opt in to each
      module.  You must also opt into OpenGL and OpenThreads (and Producer
      if needed) as these modules won't do it for you.  This is to allow you
      control over your own system piece by piece in case you need to opt
      out of certain components or change the Find behavior for a particular
      module (perhaps because the default FindOpenGL.cmake module doesn't
      work with your system as an example).  If you want to use a more
      convenient module that includes everything, use the
      FindOpenSceneGraph.cmake instead of the Findosg*.cmake modules.
 
      Locate osgViewer This module defines
 
      OSGVIEWER_FOUND - Was osgViewer found? OSGVIEWER_INCLUDE_DIR - Where
      to find the headers OSGVIEWER_LIBRARIES - The libraries to link for
      osgViewer (use this)
 
      OSGVIEWER_LIBRARY - The osgViewer library OSGVIEWER_LIBRARY_DEBUG -
      The osgViewer debug library
 
      $OSGDIR is an environment variable that would correspond to the
      ./configure --prefix=$OSGDIR used in building osg.
 
      Created by Eric Wing.
 
  FindosgVolume
       
 
      This is part of the Findosg* suite used to find OpenSceneGraph
      components.  Each component is separate and you must opt in to each
      module.  You must also opt into OpenGL and OpenThreads (and Producer
      if needed) as these modules won't do it for you.  This is to allow you
      control over your own system piece by piece in case you need to opt
      out of certain components or change the Find behavior for a particular
      module (perhaps because the default FindOpenGL.cmake module doesn't
      work with your system as an example).  If you want to use a more
      convenient module that includes everything, use the
      FindOpenSceneGraph.cmake instead of the Findosg*.cmake modules.
 
      Locate osgVolume This module defines
 
      OSGVOLUME_FOUND - Was osgVolume found? OSGVOLUME_INCLUDE_DIR - Where
      to find the headers OSGVOLUME_LIBRARIES - The libraries to link for
      osgVolume (use this)
 
      OSGVOLUME_LIBRARY - The osgVolume library OSGVOLUME_LIBRARY_DEBUG -
      The osgVolume debug library
 
      $OSGDIR is an environment variable that would correspond to the
      ./configure --prefix=$OSGDIR used in building osg.
 
      Created by Eric Wing.
 
  FindosgWidget
       
 
      This is part of the Findosg* suite used to find OpenSceneGraph
      components.  Each component is separate and you must opt in to each
      module.  You must also opt into OpenGL and OpenThreads (and Producer
      if needed) as these modules won't do it for you.  This is to allow you
      control over your own system piece by piece in case you need to opt
      out of certain components or change the Find behavior for a particular
      module (perhaps because the default FindOpenGL.cmake module doesn't
      work with your system as an example).  If you want to use a more
      convenient module that includes everything, use the
      FindOpenSceneGraph.cmake instead of the Findosg*.cmake modules.
 
      Locate osgWidget This module defines
 
      OSGWIDGET_FOUND - Was osgWidget found? OSGWIDGET_INCLUDE_DIR - Where
      to find the headers OSGWIDGET_LIBRARIES - The libraries to link for
      osgWidget (use this)
 
      OSGWIDGET_LIBRARY - The osgWidget library OSGWIDGET_LIBRARY_DEBUG -
      The osgWidget debug library
 
      $OSGDIR is an environment variable that would correspond to the
      ./configure --prefix=$OSGDIR used in building osg.
 
      FindosgWidget.cmake tweaked from Findosg* suite as created by Eric
      Wing.
 
  Findosg_functions
       
 
     
 
      This CMake file contains two macros to assist with searching for OSG
      libraries and nodekits.
 
 
  FindwxWidgets
      Find a wxWidgets (a.k.a., wxWindows) installation.
 
      This module finds if wxWidgets is installed and selects a default
      configuration to use.  wxWidgets is a modular library.  To specify the
      modules that you will use, you need to name them as components to the
      package:
 
      FIND_PACKAGE(wxWidgets COMPONENTS base core ...)
 
      There are two search branches: a windows style and a unix style.  For
      windows, the following variables are searched for and set to defaults
      in case of multiple choices.  Change them if the defaults are not
      desired (i.e., these are the only variables you should change to
      select a configuration):
 
        wxWidgets_ROOT_DIR      - Base wxWidgets directory
                                  (e.g., C:/wxWidgets-2.6.3).
        wxWidgets_LIB_DIR      - Path to wxWidgets libraries
                                  (e.g., C:/wxWidgets-2.6.3/lib/vc_lib).
        wxWidgets_CONFIGURATION - Configuration to use
                                  (e.g., msw, mswd, mswu, mswunivud, etc.)
        wxWidgets_EXCLUDE_COMMON_LIBRARIES
                                - Set to TRUE to exclude linking of
                                  commonly required libs (e.g., png tiff
                                  jpeg zlib regex expat).
 
     
 
      For unix style it uses the wx-config utility.  You can select between
      debug/release, unicode/ansi, universal/non-universal, and
      static/shared in the QtDialog or ccmake interfaces by turning ON/OFF
      the following variables:
 
        wxWidgets_USE_DEBUG
        wxWidgets_USE_UNICODE
        wxWidgets_USE_UNIVERSAL
        wxWidgets_USE_STATIC
       
 
      The following are set after the configuration is done for both windows
      and unix style:
 
        wxWidgets_FOUND            - Set to TRUE if wxWidgets was found.
        wxWidgets_INCLUDE_DIRS    - Include directories for WIN32
                                      i.e., where to find "wx/wx.h" and
                                      "wx/setup.h"; possibly empty for unices.
        wxWidgets_LIBRARIES        - Path to the wxWidgets libraries.
        wxWidgets_LIBRARY_DIRS    - compile time link dirs, useful for
                                      rpath on UNIX. Typically an empty string
                                      in WIN32 environment.
        wxWidgets_DEFINITIONS      - Contains defines required to compile/link
                                      against WX, e.g. WXUSINGDLL
        wxWidgets_DEFINITIONS_DEBUG- Contains defines required to compile/link
                                      against WX debug builds, e.g. __WXDEBUG__
        wxWidgets_CXX_FLAGS        - Include dirs and compiler flags for
                                      unices, empty on WIN32. Essentially
                                      "`wx-config --cxxflags`".
        wxWidgets_USE_FILE        - Convenience include file.
 
     
 
      Sample usage:
 
          FIND_PACKAGE(wxWidgets COMPONENTS base core gl net)
          IF(wxWidgets_FOUND)
            INCLUDE(${wxWidgets_USE_FILE})
            # and for each of your dependant executable/library targets:
            TARGET_LINK_LIBRARIES(<YourTarget> ${wxWidgets_LIBRARIES})
          ENDIF(wxWidgets_FOUND)
 
     
 
      If wxWidgets is required (i.e., not an optional part):
 
          FIND_PACKAGE(wxWidgets REQUIRED base core gl net)
          INCLUDE(${wxWidgets_USE_FILE})
          # and for each of your dependant executable/library targets:
          TARGET_LINK_LIBRARIES(<YourTarget> ${wxWidgets_LIBRARIES})
 
 
  FindwxWindows
      Find wxWindows (wxWidgets) installation
 
      This module finds if wxWindows/wxWidgets is installed and determines
      where the include files and libraries are.  It also determines what
      the name of the library is.  Please note this file is DEPRECATED and
      replaced by FindwxWidgets.cmake.  This code sets the following
      variables:
 
        WXWINDOWS_FOUND    = system has WxWindows
        WXWINDOWS_LIBRARIES = path to the wxWindows libraries
                              on Unix/Linux with additional
                              linker flags from
                              "wx-config --libs"
        CMAKE_WXWINDOWS_CXX_FLAGS  = Compiler flags for wxWindows,
                                      essentially "`wx-config --cxxflags`"
                                      on Linux
        WXWINDOWS_INCLUDE_DIR      = where to find "wx/wx.h" and "wx/setup.h"
        WXWINDOWS_LINK_DIRECTORIES = link directories, useful for rpath on
                                      Unix
        WXWINDOWS_DEFINITIONS      = extra defines
 
     
 
      OPTIONS If you need OpenGL support please
 
        SET(WXWINDOWS_USE_GL 1)
 
      in your CMakeLists.txt *before* you include this file.
 
        HAVE_ISYSTEM      - true required to replace -I by -isystem on g++
 
     
 
      For convenience include Use_wxWindows.cmake in your project's
      CMakeLists.txt using INCLUDE(Use_wxWindows).
 
      USAGE
 
        SET(WXWINDOWS_USE_GL 1)
        FIND_PACKAGE(wxWindows)
 
     
 
      NOTES wxWidgets 2.6.x is supported for monolithic builds e.g.
      compiled in wx/build/msw dir as:
 
        nmake -f makefile.vc BUILD=debug SHARED=0 USE_OPENGL=1 MONOLITHIC=1
 
     
 
      DEPRECATED
 
        CMAKE_WX_CAN_COMPILE
        WXWINDOWS_LIBRARY
        CMAKE_WX_CXX_FLAGS
        WXWINDOWS_INCLUDE_PATH
 
     
 
      AUTHOR Jan Woetzel <http://www.mip.informatik.uni-kiel.de/~jw>
      (07/2003-01/2006)
 
  FortranCInterface
      Fortran/C Interface Detection
 
      This module automatically detects the API by which C and Fortran
      languages interact.  Variables indicate if the mangling is found:
 
          FortranCInterface_GLOBAL_FOUND = Global subroutines and functions
          FortranCInterface_MODULE_FOUND = Module subroutines and functions
                                          (declared by "MODULE PROCEDURE")
 
      A function is provided to generate a C header file containing macros
      to mangle symbol names:
 
          FortranCInterface_HEADER(<file>
                                  [MACRO_NAMESPACE <macro-ns>]
                                  [SYMBOL_NAMESPACE <ns>]
                                  [SYMBOLS [<module>:]<function> ...])
 
      It generates in <file> definitions of the following macros:
 
          #define FortranCInterface_GLOBAL (name,NAME) ...
          #define FortranCInterface_GLOBAL_(name,NAME) ...
          #define FortranCInterface_MODULE (mod,name, MOD,NAME) ...
          #define FortranCInterface_MODULE_(mod,name, MOD,NAME) ...
 
      These macros mangle four categories of Fortran symbols, respectively:
 
          - Global symbols without '_': call mysub()
          - Global symbols with '_'  : call my_sub()
          - Module symbols without '_': use mymod; call mysub()
          - Module symbols with '_'  : use mymod; call my_sub()
 
      If mangling for a category is not known, its macro is left undefined.
      All macros require raw names in both lower case and upper case.  The
      MACRO_NAMESPACE option replaces the default "FortranCInterface_"
      prefix with a given namespace "<macro-ns>".
 
      The SYMBOLS option lists symbols to mangle automatically with C
      preprocessor definitions:
 
          <function>          ==> #define <ns><function> ...
          <module>:<function> ==> #define <ns><module>_<function> ...
 
      If the mangling for some symbol is not known then no preprocessor
      definition is created, and a warning is displayed.  The
      SYMBOL_NAMESPACE option prefixes all preprocessor definitions
      generated by the SYMBOLS option with a given namespace "<ns>".
 
      Example usage:
 
          include(FortranCInterface)
          FortranCInterface_HEADER(FC.h MACRO_NAMESPACE "FC_")
 
      This creates a "FC.h" header that defines mangling macros FC_GLOBAL(),
      FC_GLOBAL_(), FC_MODULE(), and FC_MODULE_().
 
      Example usage:
 
          include(FortranCInterface)
          FortranCInterface_HEADER(FCMangle.h
                                  MACRO_NAMESPACE "FC_"
                                  SYMBOL_NAMESPACE "FC_"
                                  SYMBOLS mysub mymod:my_sub)
 
      This creates a "FC.h" header that defines the same FC_*() mangling
      macros as the previous example plus preprocessor symbols FC_mysub and
      FC_mymod_my_sub.
 
      Another function is provided to verify that the Fortran and C/C++
      compilers work together:
 
          FortranCInterface_VERIFY([CXX] [QUIET])
 
      It tests whether a simple test executable using Fortran and C (and C++
      when the CXX option is given) compiles and links successfully.  The
      result is stored in the cache entry FortranCInterface_VERIFIED_C (or
      FortranCInterface_VERIFIED_CXX if CXX is given) as a boolean.  If the
      check fails and QUIET is not given the function terminates with a
      FATAL_ERROR message describing the problem.  The purpose of this check
      is to stop a build early for incompatible compiler combinations.
 
      FortranCInterface is aware of possible GLOBAL and MODULE manglings for
      many Fortran compilers, but it also provides an interface to specify
      new possible manglings.  Set the variables
 
          FortranCInterface_GLOBAL_SYMBOLS
          FortranCInterface_MODULE_SYMBOLS
 
      before including FortranCInterface to specify manglings of the symbols
      "MySub", "My_Sub", "MyModule:MySub", and "My_Module:My_Sub".  For
      example, the code:
 
          set(FortranCInterface_GLOBAL_SYMBOLS mysub_ my_sub__ MYSUB_)
            #                                  ^^^^^  ^^^^^^  ^^^^^
          set(FortranCInterface_MODULE_SYMBOLS
              __mymodule_MOD_mysub __my_module_MOD_my_sub)
            #  ^^^^^^^^    ^^^^^  ^^^^^^^^^    ^^^^^^
          include(FortranCInterface)
 
      tells FortranCInterface to try given GLOBAL and MODULE manglings.
      (The carets point at raw symbol names for clarity in this example but
      are not needed.)
 
  GetPrerequisites
       
 
      GetPrerequisites.cmake
 
      This script provides functions to list the .dll, .dylib or .so files
      that an executable or shared library file depends on.  (Its
      prerequisites.)
 
      It uses various tools to obtain the list of required shared library
      files:
 
          dumpbin (Windows)
          ldd (Linux/Unix)
          otool (Mac OSX)
 
     
 
      The following functions are provided by this script:
 
          gp_append_unique
          is_file_executable
          gp_item_default_embedded_path
            (projects can override with gp_item_default_embedded_path_override)
          gp_resolve_item
            (projects can override with gp_resolve_item_override)
          gp_resolved_file_type
            (projects can override with gp_resolved_file_type_override)
          gp_file_type
          get_prerequisites
          list_prerequisites
          list_prerequisites_by_glob
 
     
 
      Requires CMake 2.6 or greater because it uses function, break, return
      and PARENT_SCOPE.
 
  InstallRequiredSystemLibraries
       
 
      By including this file, all files in the
      CMAKE_INSTALL_DEBUG_LIBRARIES, will be installed with INSTALL_PROGRAMS
      into /bin for WIN32 and /lib for non-win32.  If
      CMAKE_SKIP_INSTALL_RULES is set to TRUE before including this file,
      then the INSTALL command is not called.  The user can use the variable
      CMAKE_INSTALL_SYSTEM_RUNTIME_LIBS to use a custom install command and
      install them into any directory they want.  If it is the MSVC
      compiler, then the microsoft run time libraries will be found and
      automatically added to the CMAKE_INSTALL_DEBUG_LIBRARIES, and
      installed.  If CMAKE_INSTALL_DEBUG_LIBRARIES is set and it is the MSVC
      compiler, then the debug libraries are installed when available.  If
      CMAKE_INSTALL_MFC_LIBRARIES is set then the MFC run time libraries are
      installed as well as the CRT run time libraries.
 
  MacroAddFileDependencies
      MACRO_ADD_FILE_DEPENDENCIES(<_file> depend_files...)
 
      Using the macro MACRO_ADD_FILE_DEPENDENCIES() is discouraged.  There
      are usually better ways to specifiy the correct dependencies.
 
      MACRO_ADD_FILE_DEPENDENCIES(<_file> depend_files...) is just a
      convenience wrapper around the OBJECT_DEPENDS source file property.
      You can just use SET_PROPERTY(SOURCE <file> APPEND PROPERTY
      OBJECT_DEPENDS depend_files) instead.
 
  Qt4ConfigDependentSettings
       
 
      This file is included by FindQt4.cmake, don't include it directly.
 
  Qt4Macros
       
 
      This file is included by FindQt4.cmake, don't include it directly.
 
  SelectLibraryConfigurations
       
 
      select_library_configurations( basename )
 
      This macro takes a library base name as an argument, and will choose
      good values for basename_LIBRARY, basename_LIBRARIES,
      basename_LIBRARY_DEBUG, and basename_LIBRARY_RELEASE depending on what
      has been found and set.  If only basename_LIBRARY_RELEASE is defined,
      basename_LIBRARY, basename_LIBRARY_DEBUG, and basename_LIBRARY_RELEASE
      will be set to the release value.  If only basename_LIBRARY_DEBUG is
      defined, then basename_LIBRARY, basename_LIBRARY_DEBUG and
      basename_LIBRARY_RELEASE will take the debug value.
 
      If the generator supports configuration types, then basename_LIBRARY
      and basename_LIBRARIES will be set with debug and optimized flags
      specifying the library to be used for the given configuration.  If no
      build type has been set or the generator in use does not support
      configuration types, then basename_LIBRARY and basename_LIBRARIES will
      take only the release values.
 
  SquishTestScript
       
 
     
 
      This script launches a GUI test using Squish.  You should not call the
      script directly; instead, you should access it via the SQUISH_ADD_TEST
      macro that is defined in FindSquish.cmake.
 
      This script starts the Squish server, launches the test on the client,
      and finally stops the squish server.  If any of these steps fail
      (including if the tests do not pass) then a fatal error is raised.
 
 
  TestBigEndian
      Define macro to determine endian type
 
      Check if the system is big endian or little endian
 
        TEST_BIG_ENDIAN(VARIABLE)
        VARIABLE - variable to store the result to
 
     
 
 
  TestCXXAcceptsFlag
      Test CXX compiler for a flag
 
      Check if the CXX compiler accepts a flag
 
        Macro CHECK_CXX_ACCEPTS_FLAG(FLAGS VARIABLE) -
            checks if the function exists
        FLAGS - the flags to try
        VARIABLE - variable to store the result
 
     
 
 
  TestForANSIForScope
      Check for ANSI for scope support
 
      Check if the compiler restricts the scope of variables declared in a
      for-init-statement to the loop body.
 
        CMAKE_NO_ANSI_FOR_SCOPE - holds result
 
     
 
 
  TestForANSIStreamHeaders
      Test for compiler support of ANSI stream headers iostream, etc.
 
      check if the compiler supports the standard ANSI iostream header
      (without the .h)
 
        CMAKE_NO_ANSI_STREAM_HEADERS - defined by the results
 
     
 
 
  TestForSSTREAM
      Test for compiler support of ANSI sstream header
 
      check if the compiler supports the standard ANSI sstream header
 
        CMAKE_NO_ANSI_STRING_STREAM - defined by the results
 
     
 
 
  TestForSTDNamespace
      Test for std:: namespace support
 
      check if the compiler supports std:: on stl classes
 
        CMAKE_NO_STD_NAMESPACE - defined by the results
 
     
 
 
  UseEcos
      This module defines variables and macros required to build eCos
      application.
 
      This file contains the following macros:
      ECOS_ADD_INCLUDE_DIRECTORIES() - add the eCos include dirs
      ECOS_ADD_EXECUTABLE(name source1 ...  sourceN ) - create an eCos
      executable ECOS_ADJUST_DIRECTORY(VAR source1 ...  sourceN ) - adjusts
      the path of the source files and puts the result into VAR
 
      Macros for selecting the toolchain: ECOS_USE_ARM_ELF_TOOLS() - enable
      the ARM ELF toolchain for the directory where it is called
      ECOS_USE_I386_ELF_TOOLS() - enable the i386 ELF toolchain for the
      directory where it is called ECOS_USE_PPC_EABI_TOOLS() - enable the
      PowerPC toolchain for the directory where it is called
 
      It contains the following variables: ECOS_DEFINITIONS
      ECOSCONFIG_EXECUTABLE ECOS_CONFIG_FILE - defaults to ecos.ecc, if your
      eCos configuration file has a different name, adjust this variable for
      internal use only:
 
        ECOS_ADD_TARGET_LIB
 
 
  UsePkgConfig
      obsolete pkg-config module for CMake
 
     
 
      Defines the following macros:
 
      PKGCONFIG(package includedir libdir linkflags cflags)
 
      Calling PKGCONFIG will fill the desired information into the 4 given
      arguments, e.g.  PKGCONFIG(libart-2.0 LIBART_INCLUDE_DIR
      LIBART_LINK_DIR LIBART_LINK_FLAGS LIBART_CFLAGS) if pkg-config was NOT
      found or the specified software package doesn't exist, the variable
      will be empty when the function returns, otherwise they will contain
      the respective information
 
 
  UseQt4
      Use Module for QT4
 
      Sets up C and C++ to use Qt 4.  It is assumed that FindQt.cmake has
      already been loaded.  See FindQt.cmake for information on how to load
      Qt 4 into your CMake project.
 
  UseSWIG
      SWIG module for CMake
 
      Defines the following macros:
 
          SWIG_ADD_MODULE(name language [ files ])
            - Define swig module with given name and specified language
          SWIG_LINK_LIBRARIES(name [ libraries ])
            - Link libraries to swig module
 
      All other macros are for internal use only.  To get the actual name of
      the swig module, use: ${SWIG_MODULE_${name}_REAL_NAME}.  Set Source
      files properties such as CPLUSPLUS and SWIG_FLAGS to specify special
      behavior of SWIG.  Also global CMAKE_SWIG_FLAGS can be used to add
      special flags to all swig calls.  Another special variable is
      CMAKE_SWIG_OUTDIR, it allows one to specify where to write all the
      swig generated module (swig -outdir option) The name-specific variable
      SWIG_MODULE_<name>_EXTRA_DEPS may be used to specify extra
      dependencies for the generated modules.  If the source file generated
      by swig need some special flag you can use
      SET_SOURCE_FILES_PROPERTIES( ${swig_generated_file_fullname}
 
              PROPERTIES COMPILE_FLAGS "-bla")
 
 
  Use_wxWindows
      ---------------------------------------------------
 
     
 
      This convenience include finds if wxWindows is installed and set the
      appropriate libs, incdirs, flags etc.  author Jan Woetzel <jw -at-
      mip.informatik.uni-kiel.de> (07/2003)
 
      USAGE:
 
          just include Use_wxWindows.cmake
          in your projects CMakeLists.txt
 
      INCLUDE( ${CMAKE_MODULE_PATH}/Use_wxWindows.cmake)
 
          if you are sure you need GL then
 
      SET(WXWINDOWS_USE_GL 1)
 
          *before* you include this file.
 
 
  UsewxWidgets
      Convenience include for using wxWidgets library
 
      Finds if wxWidgets is installed and set the appropriate libs, incdirs,
      flags etc.  INCLUDE_DIRECTORIES, LINK_DIRECTORIES and ADD_DEFINITIONS
      are called.
 
      USAGE
 
        SET( wxWidgets_USE_LIBS  gl xml xrc ) # optionally: more than wx std libs
        FIND_PACKAGE(wxWidgets REQUIRED)
        INCLUDE( ${xWidgets_USE_FILE} )
        ... add your targets here, e.g. ADD_EXECUTABLE/ ADD_LIBRARY ...
        TARGET_LINK_LIBRARIERS( <yourWxDependantTarget>  ${wxWidgets_LIBRARIES})
 
     
 
      DEPRECATED
 
        LINK_LIBRARIES is not called in favor of adding dependencies per target.
 
     
 
      AUTHOR
 
        Jan Woetzel <jw -at- mip.informatik.uni-kiel.de>
 
 
------------------------------------------------------------------------------
Policies
 
  CMP0000
      A minimum required CMake version must be specified.
 
      CMake requires that projects specify the version of CMake to which
      they have been written.  This policy has been put in place so users
      trying to build the project may be told when they need to update their
      CMake.  Specifying a version also helps the project build with CMake
      versions newer than that specified.  Use the cmake_minimum_required
      command at the top of your main CMakeLists.txt file:
 
        cmake_minimum_required(VERSION <major>.<minor>)
 
      where "<major>.<minor>" is the version of CMake you want to support
      (such as "2.6").  The command will ensure that at least the given
      version of CMake is running and help newer versions be compatible with
      the project.  See documentation of cmake_minimum_required for details.
 
      Note that the command invocation must appear in the CMakeLists.txt
      file itself; a call in an included file is not sufficient.  However,
      the cmake_policy command may be called to set policy CMP0000 to OLD or
      NEW behavior explicitly.  The OLD behavior is to silently ignore the
      missing invocation.  The NEW behavior is to issue an error instead of
      a warning.  An included file may set CMP0000 explicitly to affect how
      this policy is enforced for the main CMakeLists.txt file.
 
      This policy was introduced in CMake version 2.6.0.
 
  CMP0001
      CMAKE_BACKWARDS_COMPATIBILITY should no longer be used.
 
      The OLD behavior is to check CMAKE_BACKWARDS_COMPATIBILITY and present
      it to the user.  The NEW behavior is to ignore
      CMAKE_BACKWARDS_COMPATIBILITY completely.
 
      In CMake 2.4 and below the variable CMAKE_BACKWARDS_COMPATIBILITY was
      used to request compatibility with earlier versions of CMake.  In
      CMake 2.6 and above all compatibility issues are handled by policies
      and the cmake_policy command.  However, CMake must still check
      CMAKE_BACKWARDS_COMPATIBILITY for projects written for CMake 2.4 and
      below.
 
      This policy was introduced in CMake version 2.6.0.  CMake version
      2.8.2 warns when the policy is not set and uses OLD behavior.  Use the
      cmake_policy command to set it to OLD or NEW explicitly.
 
  CMP0002
      Logical target names must be globally unique.
 
      Targets names created with add_executable, add_library, or
      add_custom_target are logical build target names.  Logical target
      names must be globally unique because:
 
        - Unique names may be referenced unambiguously both in CMake
          code and on make tool command lines.
        - Logical names are used by Xcode and VS IDE generators
          to produce meaningful project names for the targets.
 
      The logical name of executable and library targets does not have to
      correspond to the physical file names built.  Consider using the
      OUTPUT_NAME target property to create two targets with the same
      physical name while keeping logical names distinct.  Custom targets
      must simply have globally unique names (unless one uses the global
      property ALLOW_DUPLICATE_CUSTOM_TARGETS with a Makefiles generator).
 
      This policy was introduced in CMake version 2.6.0.  CMake version
      2.8.2 warns when the policy is not set and uses OLD behavior.  Use the
      cmake_policy command to set it to OLD or NEW explicitly.
 
  CMP0003
      Libraries linked via full path no longer produce linker search paths.
 
      This policy affects how libraries whose full paths are NOT known are
      found at link time, but was created due to a change in how CMake deals
      with libraries whose full paths are known.  Consider the code
 
        target_link_libraries(myexe /path/to/libA.so)
 
      CMake 2.4 and below implemented linking to libraries whose full paths
      are known by splitting them on the link line into separate components
      consisting of the linker search path and the library name.  The
      example code might have produced something like
 
        ... -L/path/to -lA ...
 
      in order to link to library A.  An analysis was performed to order
      multiple link directories such that the linker would find library A in
      the desired location, but there are cases in which this does not work.
      CMake versions 2.6 and above use the more reliable approach of passing
      the full path to libraries directly to the linker in most cases.  The
      example code now produces something like
 
        ... /path/to/libA.so ....
 
      Unfortunately this change can break code like
 
        target_link_libraries(myexe /path/to/libA.so B)
 
      where "B" is meant to find "/path/to/libB.so".  This code is wrong
      because the user is asking the linker to find library B but has not
      provided a linker search path (which may be added with the
      link_directories command).  However, with the old linking
      implementation the code would work accidentally because the linker
      search path added for library A allowed library B to be found.
 
      In order to support projects depending on linker search paths added by
      linking to libraries with known full paths, the OLD behavior for this
      policy will add the linker search paths even though they are not
      needed for their own libraries.  When this policy is set to OLD, CMake
      will produce a link line such as
 
        ... -L/path/to /path/to/libA.so -lB ...
 
      which will allow library B to be found as it was previously.  When
      this policy is set to NEW, CMake will produce a link line such as
 
        ... /path/to/libA.so -lB ...
 
      which more accurately matches what the project specified.
 
      The setting for this policy used when generating the link line is that
      in effect when the target is created by an add_executable or
      add_library command.  For the example described above, the code
 
        cmake_policy(SET CMP0003 OLD) # or cmake_policy(VERSION 2.4)
        add_executable(myexe myexe.c)
        target_link_libraries(myexe /path/to/libA.so B)
 
      will work and suppress the warning for this policy.  It may also be
      updated to work with the corrected linking approach:
 
        cmake_policy(SET CMP0003 NEW) # or cmake_policy(VERSION 2.6)
        link_directories(/path/to) # needed to find library B
        add_executable(myexe myexe.c)
        target_link_libraries(myexe /path/to/libA.so B)
 
      Even better, library B may be specified with a full path:
 
        add_executable(myexe myexe.c)
        target_link_libraries(myexe /path/to/libA.so /path/to/libB.so)
 
      When all items on the link line have known paths CMake does not check
      this policy so it has no effect.
 
      Note that the warning for this policy will be issued for at most one
      target.  This avoids flooding users with messages for every target
      when setting the policy once will probably fix all targets.
 
      This policy was introduced in CMake version 2.6.0.  CMake version
      2.8.2 warns when the policy is not set and uses OLD behavior.  Use the
      cmake_policy command to set it to OLD or NEW explicitly.
 
  CMP0004
      Libraries linked may not have leading or trailing whitespace.
 
      CMake versions 2.4 and below silently removed leading and trailing
      whitespace from libraries linked with code like
 
        target_link_libraries(myexe " A ")
 
      This could lead to subtle errors in user projects.
 
      The OLD behavior for this policy is to silently remove leading and
      trailing whitespace.  The NEW behavior for this policy is to diagnose
      the existence of such whitespace as an error.  The setting for this
      policy used when checking the library names is that in effect when the
      target is created by an add_executable or add_library command.
 
      This policy was introduced in CMake version 2.6.0.  CMake version
      2.8.2 warns when the policy is not set and uses OLD behavior.  Use the
      cmake_policy command to set it to OLD or NEW explicitly.
 
  CMP0005
      Preprocessor definition values are now escaped automatically.
 
      This policy determines whether or not CMake should generate escaped
      preprocessor definition values added via add_definitions.  CMake
      versions 2.4 and below assumed that only trivial values would be given
      for macros in add_definitions calls.  It did not attempt to escape
      non-trivial values such as string literals in generated build rules.
      CMake versions 2.6 and above support escaping of most values, but
      cannot assume the user has not added escapes already in an attempt to
      work around limitations in earlier versions.
 
      The OLD behavior for this policy is to place definition values given
      to add_definitions directly in the generated build rules without
      attempting to escape anything.  The NEW behavior for this policy is to
      generate correct escapes for all native build tools automatically.
      See documentation of the COMPILE_DEFINITIONS target property for
      limitations of the escaping implementation.
 
      This policy was introduced in CMake version 2.6.0.  CMake version
      2.8.2 warns when the policy is not set and uses OLD behavior.  Use the
      cmake_policy command to set it to OLD or NEW explicitly.
 
  CMP0006
      Installing MACOSX_BUNDLE targets requires a BUNDLE DESTINATION.
 
      This policy determines whether the install(TARGETS) command must be
      given a BUNDLE DESTINATION when asked to install a target with the
      MACOSX_BUNDLE property set.  CMake 2.4 and below did not distinguish
      application bundles from normal executables when installing targets.
      CMake 2.6 provides a BUNDLE option to the install(TARGETS) command
      that specifies rules specific to application bundles on the Mac.
      Projects should use this option when installing a target with the
      MACOSX_BUNDLE property set.
 
      The OLD behavior for this policy is to fall back to the RUNTIME
      DESTINATION if a BUNDLE DESTINATION is not given.  The NEW behavior
      for this policy is to produce an error if a bundle target is installed
      without a BUNDLE DESTINATION.
 
      This policy was introduced in CMake version 2.6.0.  CMake version
      2.8.2 warns when the policy is not set and uses OLD behavior.  Use the
      cmake_policy command to set it to OLD or NEW explicitly.
 
  CMP0007
      list command no longer ignores empty elements.
 
      This policy determines whether the list command will ignore empty
      elements in the list.  CMake 2.4 and below list commands ignored all
      empty elements in the list.  For example, a;b;;c would have length 3
      and not 4.  The OLD behavior for this policy is to ignore empty list
      elements.  The NEW behavior for this policy is to correctly count
      empty elements in a list.
 
      This policy was introduced in CMake version 2.6.0.  CMake version
      2.8.2 warns when the policy is not set and uses OLD behavior.  Use the
      cmake_policy command to set it to OLD or NEW explicitly.
 
  CMP0008
      Libraries linked by full-path must have a valid library file name.
 
      In CMake 2.4 and below it is possible to write code like
 
        target_link_libraries(myexe /full/path/to/somelib)
 
      where "somelib" is supposed to be a valid library file name such as
      "libsomelib.a" or "somelib.lib".  For Makefile generators this
      produces an error at build time because the dependency on the full
      path cannot be found.  For VS IDE and Xcode generators this used to
      work by accident because CMake would always split off the library
      directory and ask the linker to search for the library by name
      (-lsomelib or somelib.lib).  Despite the failure with Makefiles, some
      projects have code like this and build only with VS and/or Xcode.
      This version of CMake prefers to pass the full path directly to the
      native build tool, which will fail in this case because it does not
      name a valid library file.
 
      This policy determines what to do with full paths that do not appear
      to name a valid library file.  The OLD behavior for this policy is to
      split the library name from the path and ask the linker to search for
      it.  The NEW behavior for this policy is to trust the given path and
      pass it directly to the native build tool unchanged.
 
      This policy was introduced in CMake version 2.6.1.  CMake version
      2.8.2 warns when the policy is not set and uses OLD behavior.  Use the
      cmake_policy command to set it to OLD or NEW explicitly.
 
  CMP0009
      FILE GLOB_RECURSE calls should not follow symlinks by default.
 
      In CMake 2.6.1 and below, FILE GLOB_RECURSE calls would follow through
      symlinks, sometimes coming up with unexpectedly large result sets
      because of symlinks to top level directories that contain hundreds of
      thousands of files.
 
      This policy determines whether or not to follow symlinks encountered
      during a FILE GLOB_RECURSE call.  The OLD behavior for this policy is
      to follow the symlinks.  The NEW behavior for this policy is not to
      follow the symlinks by default, but only if FOLLOW_SYMLINKS is given
      as an additional argument to the FILE command.
 
      This policy was introduced in CMake version 2.6.2.  CMake version
      2.8.2 warns when the policy is not set and uses OLD behavior.  Use the
      cmake_policy command to set it to OLD or NEW explicitly.
 
  CMP0010
      Bad variable reference syntax is an error.
 
      In CMake 2.6.2 and below, incorrect variable reference syntax such as
      a missing close-brace ("${FOO") was reported but did not stop
      processing of CMake code.  This policy determines whether a bad
      variable reference is an error.  The OLD behavior for this policy is
      to warn about the error, leave the string untouched, and continue.
      The NEW behavior for this policy is to report an error.
 
      This policy was introduced in CMake version 2.6.3.  CMake version
      2.8.2 warns when the policy is not set and uses OLD behavior.  Use the
      cmake_policy command to set it to OLD or NEW explicitly.
 
  CMP0011
      Included scripts do automatic cmake_policy PUSH and POP.
 
      In CMake 2.6.2 and below, CMake Policy settings in scripts loaded by
      the include() and find_package() commands would affect the includer.
      Explicit invocations of cmake_policy(PUSH) and cmake_policy(POP) were
      required to isolate policy changes and protect the includer.  While
      some scripts intend to affect the policies of their includer, most do
      not.  In CMake 2.6.3 and above, include() and find_package() by
      default PUSH and POP an entry on the policy stack around an included
      script, but provide a NO_POLICY_SCOPE option to disable it.  This
      policy determines whether or not to imply NO_POLICY_SCOPE for
      compatibility.  The OLD behavior for this policy is to imply
      NO_POLICY_SCOPE for include() and find_package() commands.  The NEW
      behavior for this policy is to allow the commands to do their default
      cmake_policy PUSH and POP.
 
      This policy was introduced in CMake version 2.6.3.  CMake version
      2.8.2 warns when the policy is not set and uses OLD behavior.  Use the
      cmake_policy command to set it to OLD or NEW explicitly.
 
  CMP0012
      if() recognizes numbers and boolean constants.
 
      In CMake versions 2.6.4 and lower the if() command implicitly
      dereferenced arguments corresponding to variables, even those named
      like numbers or boolean constants, except for 0 and 1.  Numbers and
      boolean constants such as true, false, yes, no, on, off, y, n,
      notfound, ignore (all case insensitive) were recognized in some cases
      but not all.  For example, the code "if(TRUE)" might have evaluated as
      false.  Numbers such as 2 were recognized only in boolean expressions
      like "if(NOT 2)" (leading to false) but not as a single-argument like
      "if(2)" (also leading to false).  Later versions of CMake prefer to
      treat numbers and boolean constants literally, so they should not be
      used as variable names.
 
      The OLD behavior for this policy is to implicitly dereference
      variables named like numbers and boolean constants.  The NEW behavior
      for this policy is to recognize numbers and boolean constants without
      dereferencing variables with such names.
 
      This policy was introduced in CMake version 2.8.0.  CMake version
      2.8.2 warns when the policy is not set and uses OLD behavior.  Use the
      cmake_policy command to set it to OLD or NEW explicitly.
 
  CMP0013
      Duplicate binary directories are not allowed.
 
      CMake 2.6.3 and below silently permitted add_subdirectory() calls to
      create the same binary directory multiple times.  During build system
      generation files would be written and then overwritten in the build
      tree and could lead to strange behavior.  CMake 2.6.4 and above
      explicitly detect duplicate binary directories.  CMake 2.6.4 always
      considers this case an error.  In CMake 2.8.0 and above this policy
      determines whether or not the case is an error.  The OLD behavior for
      this policy is to allow duplicate binary directories.  The NEW
      behavior for this policy is to disallow duplicate binary directories
      with an error.
 
      This policy was introduced in CMake version 2.8.0.  CMake version
      2.8.2 warns when the policy is not set and uses OLD behavior.  Use the
      cmake_policy command to set it to OLD or NEW explicitly.
 
  CMP0014
      Input directories must have CMakeLists.txt.
 
      CMake versions before 2.8 silently ignored missing CMakeLists.txt
      files in directories referenced by add_subdirectory() or subdirs(),
      treating them as if present but empty.  In CMake 2.8.0 and above this
      policy determines whether or not the case is an error.  The OLD
      behavior for this policy is to silently ignore the problem.  The NEW
      behavior for this policy is to report an error.
 
      This policy was introduced in CMake version 2.8.0.  CMake version
      2.8.2 warns when the policy is not set and uses OLD behavior.  Use the
      cmake_policy command to set it to OLD or NEW explicitly.
 
  CMP0015
      link_directories() treats paths relative to the source dir.
 
      In CMake 2.6.4 and lower the link_directories() command passed
      relative paths unchanged to the linker.  In CMake 2.8.1 and above the
      link_directories() command prefers to interpret relative paths with
      respect to CMAKE_CURRENT_SOURCE_DIR, which is consistent with
      include_directories() and other commands.  The OLD behavior for this
      policy is to use relative paths verbatim in the linker command.  The
      NEW behavior for this policy is to convert relative paths to absolute
      paths by appending the relative path to CMAKE_CURRENT_SOURCE_DIR.
 
      This policy was introduced in CMake version 2.8.1.  CMake version
      2.8.2 warns when the policy is not set and uses OLD behavior.  Use the
      cmake_policy command to set it to OLD or NEW explicitly.
 
------------------------------------------------------------------------------
Variables
 
------------------------------------------------------------------------------
Variables That Change Behavior
 
  BUILD_SHARED_LIBS
      Global flag to cause add_library to create shared libraries if on.
 
      If present and true, this will cause all libraries to be built shared
      unless the library was explicitly added as a static library.  This
      variable is often added to projects as an OPTION so that each user of
      a project can decide if they want to build the project using shared or
      static libraries.
 
  CMAKE_BACKWARDS_COMPATIBILITY
      Version of cmake required to build project
 
      From the point of view of backwards compatibility, this specifies what
      version of CMake should be supported.  By default this value is the
      version number of CMake that you are running.  You can set this to an
      older version of CMake to support deprecated commands of CMake in
      projects that were written to use older versions of CMake.  This can
      be set by the user or set at the beginning of a CMakeLists file.
 
  CMAKE_BUILD_TYPE
      Specifies the build type for make based generators.
 
      This specifies what build type will be built in this tree.  Possible
      values are empty, Debug, Release, RelWithDebInfo and MinSizeRel.  This
      variable is only supported for make based generators.  If this
      variable is supported, then CMake will also provide initial values for
      the variables with the name
      CMAKE_C_FLAGS_[Debug|Release|RelWithDebInfo|MinSizeRel].  For example,
      if CMAKE_BUILD_TYPE is Debug, then CMAKE_C_FLAGS_DEBUG will be added
      to the CMAKE_C_FLAGS.
 
  CMAKE_COLOR_MAKEFILE
      Enables color output when using the Makefile generator.
 
      When enabled, the generated Makefiles will produce colored output.
      Default is ON.
 
  CMAKE_CONFIGURATION_TYPES
      Specifies the available build types.
 
      This specifies what build types will be available such as Debug,
      Release, RelWithDebInfo etc.  This has reasonable defaults on most
      platforms.  But can be extended to provide other build types.  See
      also CMAKE_BUILD_TYPE.
 
  CMAKE_FIND_LIBRARY_PREFIXES
      Prefixes to prepend when looking for libraries.
 
      This specifies what prefixes to add to library names when the
      find_library command looks for libraries.  On UNIX systems this is
      typically lib, meaning that when trying to find the foo library it
      will look for libfoo.
 
  CMAKE_FIND_LIBRARY_SUFFIXES
      Suffixes to append when looking for libraries.
 
      This specifies what suffixes to add to library names when the
      find_library command looks for libraries.  On Windows systems this is
      typically .lib and .dll, meaning that when trying to find the foo
      library it will look for foo.dll etc.
 
  CMAKE_INCLUDE_PATH
      Path used for searching by FIND_FILE() and FIND_PATH().
 
      Specifies a path which will be used both by FIND_FILE() and
      FIND_PATH().  Both commands will check each of the contained
      directories for the existence of the file which is currently searched.
      By default it is empty, it is intended to be set by the project.  See
      also CMAKE_SYSTEM_INCLUDE_PATH, CMAKE_PREFIX_PATH.
 
  CMAKE_INSTALL_PREFIX
      Install directory used by install.
 
      If "make install" is invoked or INSTALL is built, this directory is
      pre-pended onto all install directories.  This variable defaults to
      /usr/local on UNIX and c:/Program Files on Windows.
 
  CMAKE_LIBRARY_PATH
      Path used for searching by FIND_LIBRARY().
 
      Specifies a path which will be used by FIND_LIBRARY().  FIND_LIBRARY()
      will check each of the contained directories for the existence of the
      library which is currently searched.  By default it is empty, it is
      intended to be set by the project.  See also
      CMAKE_SYSTEM_LIBRARY_PATH, CMAKE_PREFIX_PATH.
 
  CMAKE_MFC_FLAG
      Tell cmake to use MFC for an executable or dll.
 
      This can be set in a CMakeLists.txt file and will enable MFC in the
      application.  It should be set to 1 for static the static MFC library,
      and 2 for the shared MFC library.  This is used in visual studio 6 and
      7 project files.  The CMakeSetup dialog used MFC and the
      CMakeLists.txt looks like this:
 
      add_definitions(-D_AFXDLL)
 
      set(CMAKE_MFC_FLAG 2)
 
      add_executable(CMakeSetup WIN32 ${SRCS})
 
 
  CMAKE_MODULE_PATH
      List of directories to search for CMake modules.
 
      Commands like include() and find_package() search for files in
      directories listed by this variable before checking the default
      modules that come with CMake.
 
  CMAKE_NOT_USING_CONFIG_FLAGS
      Skip _BUILD_TYPE flags if true.
 
      This is an internal flag used by the generators in CMake to tell CMake
      to skip the _BUILD_TYPE flags.
 
  CMAKE_PREFIX_PATH
      Path used for searching by FIND_XXX(), with appropriate suffixes
      added.
 
      Specifies a path which will be used by the FIND_XXX() commands.  It
      contains the "base" directories, the FIND_XXX() commands append
      appropriate subdirectories to the base directories.  So FIND_PROGRAM()
      adds /bin to each of the directories in the path, FIND_LIBRARY()
      appends /lib to each of the directories, and FIND_PATH() and
      FIND_FILE() append /include .  By default it is empty, it is intended
      to be set by the project.  See also CMAKE_SYSTEM_PREFIX_PATH,
      CMAKE_INCLUDE_PATH, CMAKE_LIBRARY_PATH, CMAKE_PROGRAM_PATH.
 
  CMAKE_PROGRAM_PATH
      Path used for searching by FIND_PROGRAM().
 
      Specifies a path which will be used by FIND_PROGRAM().  FIND_PROGRAM()
      will check each of the contained directories for the existence of the
      program which is currently searched.  By default it is empty, it is
      intended to be set by the project.  See also
      CMAKE_SYSTEM_PROGRAM_PATH, CMAKE_PREFIX_PATH.
 
  CMAKE_SKIP_INSTALL_ALL_DEPENDENCY
      Don't make the install target depend on the all target.
 
      By default, the "install" target depends on the "all" target.  This
      has the effect, that when "make install" is invoked or INSTALL is
      built, first the "all" target is built, then the installation starts.
      If CMAKE_SKIP_INSTALL_ALL_DEPENDENCY is set to TRUE, this dependency
      is not created, so the installation process will start immediately,
      independent from whether the project has been completely built or not.
 
  CMAKE_SYSTEM_INCLUDE_PATH
      Path used for searching by FIND_FILE() and FIND_PATH().
 
      Specifies a path which will be used both by FIND_FILE() and
      FIND_PATH().  Both commands will check each of the contained
      directories for the existence of the file which is currently searched.
      By default it contains the standard directories for the current
      system.  It is NOT intended to be modified by the project, use
      CMAKE_INCLUDE_PATH for this.  See also CMAKE_SYSTEM_PREFIX_PATH.
 
  CMAKE_SYSTEM_LIBRARY_PATH
      Path used for searching by FIND_LIBRARY().
 
      Specifies a path which will be used by FIND_LIBRARY().  FIND_LIBRARY()
      will check each of the contained directories for the existence of the
      library which is currently searched.  By default it contains the
      standard directories for the current system.  It is NOT intended to be
      modified by the project, use CMAKE_LIBRARY_PATH for this.  See also
      CMAKE_SYSTEM_PREFIX_PATH.
 
  CMAKE_SYSTEM_PREFIX_PATH
      Path used for searching by FIND_XXX(), with appropriate suffixes
      added.
 
      Specifies a path which will be used by the FIND_XXX() commands.  It
      contains the "base" directories, the FIND_XXX() commands append
      appropriate subdirectories to the base directories.  So FIND_PROGRAM()
      adds /bin to each of the directories in the path, FIND_LIBRARY()
      appends /lib to each of the directories, and FIND_PATH() and
      FIND_FILE() append /include .  By default this contains the standard
      directories for the current system.  It is NOT intended to be modified
      by the project, use CMAKE_PREFIX_PATH for this.  See also
      CMAKE_SYSTEM_INCLUDE_PATH, CMAKE_SYSTEM_LIBRARY_PATH,
      CMAKE_SYSTEM_PROGRAM_PATH.
 
  CMAKE_SYSTEM_PROGRAM_PATH
      Path used for searching by FIND_PROGRAM().
 
      Specifies a path which will be used by FIND_PROGRAM().  FIND_PROGRAM()
      will check each of the contained directories for the existence of the
      program which is currently searched.  By default it contains the
      standard directories for the current system.  It is NOT intended to be
      modified by the project, use CMAKE_PROGRAM_PATH for this.  See also
      CMAKE_SYSTEM_PREFIX_PATH.
 
  CMAKE_USER_MAKE_RULES_OVERRIDE
      Specify a file that can change the build rule variables.
 
      If this variable is set, it should to point to a CMakeLists.txt file
      that will be read in by CMake after all the system settings have been
      set, but before they have been used.  This would allow you to override
      any variables that need to be changed for some special project.
 
------------------------------------------------------------------------------
Variables That Describe the System
 
  APPLE
      True if running on Mac OSX.
 
      Set to true on Mac OSX.
 
  BORLAND
      True of the borland compiler is being used.
 
      This is set to true if the Borland compiler is being used.
 
  CMAKE_CL_64
      Using the 64 bit compiler from Microsoft
 
      Set to true when using the 64 bit cl compiler from Microsoft.
 
  CMAKE_COMPILER_2005
      Using the Visual Studio 2005 compiler from Microsoft
 
      Set to true when using the Visual Studio 2005 compiler from Microsoft.
 
  CMAKE_HOST_APPLE
      True for Apple OSXoperating systems.
 
      Set to true when the host system is Apple OSX.
 
  CMAKE_HOST_SYSTEM
      Name of system cmake is being run on.
 
      The same as CMAKE_SYSTEM but for the host system instead of the target
      system when cross compiling.
 
  CMAKE_HOST_SYSTEM_NAME
      Name of the OS CMake is running on.
 
      The same as CMAKE_SYSTEM_NAME but for the host system instead of the
      target system when cross compiling.
 
  CMAKE_HOST_SYSTEM_PROCESSOR
      The name of the CPU CMake is running on.
 
      The same as CMAKE_SYSTEM_PROCESSOR but for the host system instead of
      the target system when cross compiling.
 
  CMAKE_HOST_SYSTEM_VERSION
      OS version CMake is running on.
 
      The same as CMAKE_SYSTEM_VERSION but for the host system instead of
      the target system when cross compiling.
 
  CMAKE_HOST_UNIX
      True for UNIX and UNIX like operating systems.
 
      Set to true when the host system is UNIX or UNIX like (i.e.  APPLE and
      CYGWIN).
 
  CMAKE_HOST_WIN32
      True on windows systems, including win64.
 
      Set to true when the host system is Windows and on cygwin.
 
  CMAKE_OBJECT_PATH_MAX
      Maximum object file full-path length allowed by native build tools.
 
      CMake computes for every source file an object file name that is
      unique to the source file and deterministic with respect to the full
      path to the source file.  This allows multiple source files in a
      target to share the same name if they lie in different directories
      without rebuilding when one is added or removed.  However, it can
      produce long full paths in a few cases, so CMake shortens the path
      using a hashing scheme when the full path to an object file exceeds a
      limit.  CMake has a built-in limit for each platform that is
      sufficient for common tools, but some native tools may have a lower
      limit.  This variable may be set to specify the limit explicitly.  The
      value must be an integer no less than 128.
 
  CMAKE_SYSTEM
      Name of system cmake is compiling for.
 
      This variable is the composite of CMAKE_SYSTEM_NAME and
      CMAKE_SYSTEM_VERSION, like this
      ${CMAKE_SYSTEM_NAME}-${CMAKE_SYSTEM_VERSION}.  If CMAKE_SYSTEM_VERSION
      is not set, then CMAKE_SYSTEM is the same as CMAKE_SYSTEM_NAME.
 
  CMAKE_SYSTEM_NAME
      Name of the OS CMake is building for.
 
      This is the name of the operating system on which CMake is targeting.
      On systems that have the uname command, this variable is set to the
      output of uname -s.  Linux, Windows, and Darwin for Mac OSX are the
      values found on the big three operating systems.
 
  CMAKE_SYSTEM_PROCESSOR
      The name of the CPU CMake is building for.
 
      On systems that support uname, this variable is set to the output of
      uname -p, on windows it is set to the value of the environment
      variable PROCESSOR_ARCHITECTURE
 
  CMAKE_SYSTEM_VERSION
      OS version CMake is building for.
 
      A numeric version string for the system, on systems that support
      uname, this variable is set to the output of uname -r.  On other
      systems this is set to major-minor version numbers.
 
  CYGWIN
      True for cygwin.
 
      Set to true when using CYGWIN.
 
  MSVC
      True when using Microsoft Visual C
 
      Set to true when the compiler is some version of Microsoft Visual C.
 
  MSVC80
      True when using Microsoft Visual C 8.0
 
      Set to true when the compiler is version 8.0 of Microsoft Visual C.
 
  MSVC_IDE
      True when using the Microsoft Visual C IDE
 
      Set to true when the target platform is the Microsoft Visual C IDE, as
      opposed to the command line compiler.
 
  MSVC_VERSION
      The version of Microsoft Visual C/C++ being used if any.
 
      The version of Microsoft Visual C/C++ being used if any.  For example
      1300 is MSVC 6.0.
 
  UNIX
      True for UNIX and UNIX like operating systems.
 
      Set to true when the target system is UNIX or UNIX like (i.e.  APPLE
      and CYGWIN).
 
  WIN32
      True on windows systems, including win64.
 
      Set to true when the target system is Windows and on cygwin.
 
  XCODE_VERSION
      Version of Xcode (Xcode generator only).
 
      Under the Xcode generator, this is the version of Xcode as specified
      in "Xcode.app/Contents/version.plist" (such as "3.1.2").
 
------------------------------------------------------------------------------
Variables for Languages
 
  CMAKE_<LANG>_ARCHIVE_APPEND
      Rule variable to append to a static archive.
 
      This is a rule variable that tells CMake how to append to a static
      archive.  It is used in place of CMAKE_<LANG>_CREATE_STATIC_LIBRARY on
      some platforms in order to support large object counts.  See also
      CMAKE_<LANG>_ARCHIVE_CREATE and CMAKE_<LANG>_ARCHIVE_FINISH.
 
  CMAKE_<LANG>_ARCHIVE_CREATE
      Rule variable to create a new static archive.
 
      This is a rule variable that tells CMake how to create a static
      archive.  It is used in place of CMAKE_<LANG>_CREATE_STATIC_LIBRARY on
      some platforms in order to support large object counts.  See also
      CMAKE_<LANG>_ARCHIVE_APPEND and CMAKE_<LANG>_ARCHIVE_FINISH.
 
  CMAKE_<LANG>_ARCHIVE_FINISH
      Rule variable to finish an existing static archive.
 
      This is a rule variable that tells CMake how to finish a static
      archive.  It is used in place of CMAKE_<LANG>_CREATE_STATIC_LIBRARY on
      some platforms in order to support large object counts.  See also
      CMAKE_<LANG>_ARCHIVE_CREATE and CMAKE_<LANG>_ARCHIVE_APPEND.
 
  CMAKE_<LANG>_COMPILER
      The full path to the compiler for LANG.
 
      This is the command that will be used as the <LANG> compiler.  Once
      set, you can not change this variable.
 
  CMAKE_<LANG>_COMPILER_ABI
      An internal variable subject to change.
 
      This is used in determining the compiler ABI and is subject to change.
 
  CMAKE_<LANG>_COMPILER_ID
      An internal variable subject to change.
 
      This is used in determining the compiler and is subject to change.
 
  CMAKE_<LANG>_COMPILER_LOADED
      Defined to true if the language is enabled.
 
      When language <LANG> is enabled by project() or enable_language() this
      variable is defined to 1.
 
  CMAKE_<LANG>_COMPILE_OBJECT
      Rule variable to compile a single object file.
 
      This is a rule variable that tells CMake how to compile a single
      object file for for the language <LANG>.
 
  CMAKE_<LANG>_CREATE_SHARED_LIBRARY
      Rule variable to create a shared library.
 
      This is a rule variable that tells CMake how to create a shared
      library for the language <LANG>.
 
  CMAKE_<LANG>_CREATE_SHARED_MODULE
      Rule variable to create a shared module.
 
      This is a rule variable that tells CMake how to create a shared
      library for the language <LANG>.
 
  CMAKE_<LANG>_CREATE_STATIC_LIBRARY
      Rule variable to create a static library.
 
      This is a rule variable that tells CMake how to create a static
      library for the language <LANG>.
 
  CMAKE_<LANG>_FLAGS_DEBUG
      Flags for Debug build type or configuration.
 
      <LANG> flags used when CMAKE_BUILD_TYPE is Debug.
 
  CMAKE_<LANG>_FLAGS_MINSIZEREL
      Flags for MinSizeRel build type or configuration.
 
      <LANG> flags used when CMAKE_BUILD_TYPE is MinSizeRel.Short for
      minimum size release.
 
  CMAKE_<LANG>_FLAGS_RELEASE
      Flags for Release build type or configuration.
 
      <LANG> flags used when CMAKE_BUILD_TYPE is Release
 
  CMAKE_<LANG>_FLAGS_RELWITHDEBINFO
      Flags for RelWithDebInfo type or configuration.
 
      <LANG> flags used when CMAKE_BUILD_TYPE is RelWithDebInfo.  Short for
      Release With Debug Information.
 
  CMAKE_<LANG>_IGNORE_EXTENSIONS
      File extensions that should be ignored by the build.
 
      This is a list of file extensions that may be part of a project for a
      given language but are not compiled.
 
  CMAKE_<LANG>_IMPLICIT_INCLUDE_DIRECTORIES
      Directories implicitly searched by the compiler for header files.
 
      CMake does not explicitly specify these directories on compiler
      command lines for language <LANG>.  This prevents system include
      directories from being treated as user include directories on some
      compilers.
 
  CMAKE_<LANG>_IMPLICIT_LINK_DIRECTORIES
      Implicit linker search path detected for language <LANG>.
 
      Compilers typically pass directories containing language runtime
      libraries and default library search paths when they invoke a linker.
      These paths are implicit linker search directories for the compiler's
      language.  CMake automatically detects these directories for each
      language and reports the results in this variable.
 
  CMAKE_<LANG>_IMPLICIT_LINK_LIBRARIES
      Implicit link libraries and flags detected for language <LANG>.
 
      Compilers typically pass language runtime library names and other
      flags when they invoke a linker.  These flags are implicit link
      options for the compiler's language.  CMake automatically detects
      these libraries and flags for each language and reports the results in
      this variable.
 
  CMAKE_<LANG>_LINKER_PREFERENCE
      Preference value for linker language selection.
 
      The "linker language" for executable, shared library, and module
      targets is the language whose compiler will invoke the linker.  The
      LINKER_LANGUAGE target property sets the language explicitly.
      Otherwise, the linker language is that whose linker preference value
      is highest among languages compiled and linked into the target.  See
      also the CMAKE_<LANG>_LINKER_PREFERENCE_PROPAGATES variable.
 
  CMAKE_<LANG>_LINKER_PREFERENCE_PROPAGATES
      True if CMAKE_<LANG>_LINKER_PREFERENCE propagates across targets.
 
      This is used when CMake selects a linker language for a target.
      Languages compiled directly into the target are always considered.  A
      language compiled into static libraries linked by the target is
      considered if this variable is true.
 
  CMAKE_<LANG>_LINK_EXECUTABLE
      Rule variable to link and executable.
 
      Rule variable to link and executable for the given language.
 
  CMAKE_<LANG>_OUTPUT_EXTENSION
      Extension for the output of a compile for a single file.
 
      This is the extension for an object file for the given <LANG>.  For
      example .obj for C on Windows.
 
  CMAKE_<LANG>_PLATFORM_ID
      An internal variable subject to change.
 
      This is used in determining the platform and is subject to change.
 
  CMAKE_<LANG>_SIZEOF_DATA_PTR
      Size of pointer-to-data types for language <LANG>.
 
      This holds the size (in bytes) of pointer-to-data types in the target
      platform ABI.  It is defined for languages C and CXX (C++).
 
  CMAKE_<LANG>_SOURCE_FILE_EXTENSIONS
      Extensions of source files for the given language.
 
      This is the list of extensions for a given languages source files.
 
  CMAKE_COMPILER_IS_GNU<LANG>
      True if the compiler is GNU.
 
      If the selected <LANG> compiler is the GNU compiler then this is TRUE,
      if not it is FALSE.
 
  CMAKE_INTERNAL_PLATFORM_ABI
      An internal variable subject to change.
 
      This is used in determining the compiler ABI and is subject to change.
 
  CMAKE_USER_MAKE_RULES_OVERRIDE_<LANG>
      Specify a file that can change the build rule variables.
 
      If this variable is set, it should to point to a CMakeLists.txt file
      that will be read in by CMake after all the system settings have been
      set, but before they have been used.  This would allow you to override
      any variables that need to be changed for some language.
 
------------------------------------------------------------------------------
Variables that Control the Build
 
  CMAKE_<CONFIG>_POSTFIX
      Default filename postfix for libraries under configuration <CONFIG>.
 
      When a non-executable target is created its <CONFIG>_POSTFIX target
      property is initialized with the value of this variable if it is set.
 
  CMAKE_ARCHIVE_OUTPUT_DIRECTORY
      Where to put all the ARCHIVE targets when built.
 
      This variable is used to initialize the ARCHIVE_OUTPUT_DIRECTORY
      property on all the targets.  See that target property for additional
      information.
 
  CMAKE_BUILD_WITH_INSTALL_RPATH
      Use the install path for the RPATH
 
      Normally CMake uses the build tree for the RPATH when building
      executables etc on systems that use RPATH.  When the software is
      installed the executables etc are relinked by CMake to have the
      install RPATH.  If this variable is set to true then the software is
      always built with the install path for the RPATH and does not need to
      be relinked when installed.
 
  CMAKE_DEBUG_POSTFIX
      See variable CMAKE_<CONFIG>_POSTFIX.
 
      This variable is a special case of the more-general
      CMAKE_<CONFIG>_POSTFIX variable for the DEBUG configuration.
 
  CMAKE_EXE_LINKER_FLAGS
      Linker flags used to create executables.
 
      Flags used by the linker when creating an executable.
 
  CMAKE_EXE_LINKER_FLAGS_[CMAKE_BUILD_TYPE]
      Flag used when linking an executable.
 
      Same as CMAKE_C_FLAGS_* but used by the linker when creating
      executables.
 
  CMAKE_Fortran_MODULE_DIRECTORY
      Fortran module output directory.
 
      This variable is used to initialize the Fortran_MODULE_DIRECTORY
      property on all the targets.  See that target property for additional
      information.
 
  CMAKE_INCLUDE_CURRENT_DIR
      Automatically add the current source- and build directories to the
      include path.
 
      If this variable is enabled, CMake automatically adds in each
      directory ${CMAKE_CURRENT_SOURCE_DIR} and ${CMAKE_CURRENT_BINARY_DIR}
      to the include path for this directory.  These additional include
      directories do not propagate down to subdirectories.  This is useful
      mainly for out-of-source builds, where files generated into the build
      tree are included by files located in the source tree.
 
      By default CMAKE_INCLUDE_CURRENT_DIR is OFF.
 
  CMAKE_INSTALL_NAME_DIR
      Mac OSX directory name for installed targets.
 
      CMAKE_INSTALL_NAME_DIR is used to initialize the INSTALL_NAME_DIR
      property on all targets.  See that target property for more
      information.
 
  CMAKE_INSTALL_RPATH
      The rpath to use for installed targets.
 
      A semicolon-separated list specifying the rpath to use in installed
      targets (for platforms that support it).  This is used to initialize
      the target property INSTALL_RPATH for all targets.
 
  CMAKE_INSTALL_RPATH_USE_LINK_PATH
      Add paths to linker search and installed rpath.
 
      CMAKE_INSTALL_RPATH_USE_LINK_PATH is a boolean that if set to true
      will append directories in the linker search path and outside the
      project to the INSTALL_RPATH.  This is used to initialize the target
      property INSTALL_RPATH_USE_LINK_PATH for all targets.
 
  CMAKE_LIBRARY_OUTPUT_DIRECTORY
      Where to put all the LIBRARY targets when built.
 
      This variable is used to initialize the LIBRARY_OUTPUT_DIRECTORY
      property on all the targets.  See that target property for additional
      information.
 
  CMAKE_LIBRARY_PATH_FLAG
      The flag used to add a library search path to a compiler.
 
      The flag used to specify a library directory to the compiler.  On most
      compilers this is "-L".
 
  CMAKE_LINK_DEF_FILE_FLAG 
      Linker flag used to specify a .def file for dll creation.
 
      The flag used to add a .def file when creating a dll on Windows, this
      is only defined on Windows.
 
  CMAKE_LINK_LIBRARY_FILE_FLAG
      Flag used to link a library specified by a path to its file.
 
      The flag used before a library file path is given to the linker.  This
      is needed only on very few platforms.
 
  CMAKE_LINK_LIBRARY_FLAG
      Flag used to link a library into an executable.
 
      The flag used to specify a library to link to an executable.  On most
      compilers this is "-l".
 
  CMAKE_NO_BUILTIN_CHRPATH
      Do not use the builtin ELF editor to fix RPATHs on installation.
 
      When an ELF binary needs to have a different RPATH after installation
      than it does in the build tree, CMake uses a builtin editor to change
      the RPATH in the installed copy.  If this variable is set to true then
      CMake will relink the binary before installation instead of using its
      builtin editor.
 
  CMAKE_RUNTIME_OUTPUT_DIRECTORY
      Where to put all the RUNTIME targets when built.
 
      This variable is used to initialize the RUNTIME_OUTPUT_DIRECTORY
      property on all the targets.  See that target property for additional
      information.
 
  CMAKE_SKIP_BUILD_RPATH
      Do not include RPATHs in the build tree.
 
      Normally CMake uses the build tree for the RPATH when building
      executables etc on systems that use RPATH.  When the software is
      installed the executables etc are relinked by CMake to have the
      install RPATH.  If this variable is set to true then the software is
      always built with no RPATH.
 
  CMAKE_USE_RELATIVE_PATHS
      Use relative paths (May not work!).
 
      If this is set to TRUE, then the CMake will use relative paths between
      the source and binary tree.  This option does not work for more
      complicated projects, and relative paths are used when possible.  In
      general, it is not possible to move CMake generated makefiles to a
      different location regardless of the value of this variable.
 
  EXECUTABLE_OUTPUT_PATH
      Old executable location variable.
 
      The target property RUNTIME_OUTPUT_DIRECTORY supercedes this variable
      for a target if it is set.  Executable targets are otherwise placed in
      this directory.
 
  LIBRARY_OUTPUT_PATH
      Old library location variable.
 
      The target properties ARCHIVE_OUTPUT_DIRECTORY,
      LIBRARY_OUTPUT_DIRECTORY, and RUNTIME_OUTPUT_DIRECTORY supercede this
      variable for a target if they are set.  Library targets are otherwise
      placed in this directory.
 
------------------------------------------------------------------------------
Variables that Provide Information
 
variables defined by cmake, that give information about the project, and
cmake
 
  CMAKE_AR
      Name of archiving tool for static libraries.
 
      This specifies name of the program that creates archive or static
      libraries.
 
  CMAKE_BINARY_DIR
      The path to the top level of the build tree.
 
      This is the full path to the top level of the current CMake build
      tree.  For an in-source build, this would be the same as
      CMAKE_SOURCE_DIR.
 
  CMAKE_BUILD_TOOL
      Tool used for the actual build process.
 
      This variable is set to the program that will be needed to build the
      output of CMake.  If the generator selected was Visual Studio 6, the
      CMAKE_MAKE_PROGRAM will be set to msdev, for Unix makefiles it will be
      set to make or gmake, and for Visual Studio 7 it set to devenv.  For
      Nmake Makefiles the value is nmake.  This can be useful for adding
      special flags and commands based on the final build environment.
 
  CMAKE_CACHEFILE_DIR
      The directory with the CMakeCache.txt file.
 
      This is the full path to the directory that has the CMakeCache.txt
      file in it.  This is the same as CMAKE_BINARY_DIR.
 
  CMAKE_CACHE_MAJOR_VERSION
      Major version of CMake used to create the CMakeCache.txt file
 
      This is stores the major version of CMake used to write a CMake cache
      file.  It is only different when a different version of CMake is run
      on a previously created cache file.
 
  CMAKE_CACHE_MINOR_VERSION
      Minor version of CMake used to create the CMakeCache.txt file
 
      This is stores the minor version of CMake used to write a CMake cache
      file.  It is only different when a different version of CMake is run
      on a previously created cache file.
 
  CMAKE_CACHE_PATCH_VERSION
      Patch version of CMake used to create the CMakeCache.txt file
 
      This is stores the patch version of CMake used to write a CMake cache
      file.  It is only different when a different version of CMake is run
      on a previously created cache file.
 
  CMAKE_CFG_INTDIR
      Build-time reference to per-configuration output subdirectory.
 
      For native build systems supporting multiple configurations in the
      build tree (such as Visual Studio and Xcode), the value is a reference
      to a build-time variable specifying the name of the per-configuration
      output subdirectory.  On Makefile generators this evaluates to "."
      because there is only one configuration in a build tree.  Example
      values:
 
        $(IntDir)        = Visual Studio 6
        $(OutDir)        = Visual Studio 7, 8, 9
        $(Configuration) = Visual Studio 10
        $(CONFIGURATION) = Xcode
        .                = Make-based tools
 
      Since these values are evaluated by the native build system, this
      variable is suitable only for use in command lines that will be
      evaluated at build time.  Example of intended usage:
 
        add_executable(mytool mytool.c)
        add_custom_command(
          OUTPUT out.txt
          COMMAND ${CMAKE_CURRENT_BINARY_DIR}/${CMAKE_CFG_INTDIR}/mytool
                  ${CMAKE_CURRENT_SOURCE_DIR}/in.txt out.txt
          DEPENDS mytool in.txt
          )
        add_custom_target(drive ALL DEPENDS out.txt)
 
      Note that CMAKE_CFG_INTDIR is no longer necessary for this purpose but
      has been left for compatibility with existing projects.  Instead
      add_custom_command() recognizes executable target names in its COMMAND
      option, so "${CMAKE_CURRENT_BINARY_DIR}/${CMAKE_CFG_INTDIR}/mytool"
      can be replaced by just "mytool".
 
      This variable is read-only.  Setting it is undefined behavior.  In
      multi-configuration build systems the value of this variable is passed
      as the value of preprocessor symbol "CMAKE_INTDIR" to the compilation
      of all source files.
 
  CMAKE_COMMAND
      The full path to the cmake executable.
 
      This is the full path to the CMake executable cmake which is useful
      from custom commands that want to use the cmake -E option for portable
      system commands.  (e.g.  /usr/local/bin/cmake
 
  CMAKE_CROSSCOMPILING
      Is CMake currently cross compiling.
 
      This variable will be set to true by CMake if CMake is cross
      compiling.  Specifically if the build platform is different from the
      target platform.
 
  CMAKE_CTEST_COMMAND
      Full path to ctest command installed with cmake.
 
      This is the full path to the CTest executable ctest which is useful
      from custom commands that want to use the cmake -E option for portable
      system commands.
 
  CMAKE_CURRENT_BINARY_DIR
      The path to the binary directory currently being processed.
 
      This the full path to the build directory that is currently being
      processed by cmake.  Each directory added by add_subdirectory will
      create a binary directory in the build tree, and as it is being
      processed this variable will be set.  For in-source builds this is the
      current source directory being processed.
 
  CMAKE_CURRENT_LIST_FILE
      Full path to the listfile currently being processed.
 
      As CMake processes the listfiles in your project this variable will
      always be set to the one currently being processed.  The value has
      dynamic scope.  When CMake starts processing commands in a source file
      it sets this variable to the location of the file.  When CMake
      finishes processing commands from the file it restores the previous
      value.  Therefore the value of the variable inside a macro or function
      is the file invoking the bottom-most entry on the call stack, not the
      file containing the macro or function definition.
 
      See also CMAKE_PARENT_LIST_FILE.
 
  CMAKE_CURRENT_LIST_LINE
      The line number of the current file being processed.
 
      This is the line number of the file currently being processed by
      cmake.
 
  CMAKE_CURRENT_SOURCE_DIR
      The path to the source directory currently being processed.
 
      This the full path to the source directory that is currently being
      processed by cmake.
 
  CMAKE_DL_LIBS
      Name of library containing dlopen and dlcose.
 
      The name of the library that has dlopen and dlclose in it, usually
      -ldl on most UNIX machines.
 
  CMAKE_EDIT_COMMAND
      Full path to cmake-gui or ccmake.
 
      This is the full path to the CMake executable that can graphically
      edit the cache.  For example, cmake-gui, ccmake, or cmake -i.
 
  CMAKE_EXECUTABLE_SUFFIX
      The suffix for executables on this platform.
 
      The suffix to use for the end of an executable if any, .exe on
      Windows.
 
      CMAKE_EXECUTABLE_SUFFIX_<LANG> overrides this for language <LANG>.
 
  CMAKE_EXTRA_GENERATOR
      The extra generator used to build the project.
 
      When using the Eclipse, CodeBlocks or KDevelop generators, CMake
      generates Makefiles (CMAKE_GENERATOR) and additionally project files
      for the respective IDE.  This IDE project file generator is stored in
      CMAKE_EXTRA_GENERATOR (e.g.  "Eclipse CDT4").
 
  CMAKE_EXTRA_SHARED_LIBRARY_SUFFIXES
      Additional suffixes for shared libraries.
 
      Extensions for shared libraries other than that specified by
      CMAKE_SHARED_LIBRARY_SUFFIX, if any.  CMake uses this to recognize
      external shared library files during analysis of libraries linked by a
      target.
 
  CMAKE_GENERATOR
      The generator used to build the project.
 
      The name of the generator that is being used to generate the build
      files.  (e.g.  "Unix Makefiles", "Visual Studio 6", etc.)
 
  CMAKE_HOME_DIRECTORY
      Path to top of source tree.
 
      This is the path to the top level of the source tree.
 
  CMAKE_IMPORT_LIBRARY_PREFIX
      The prefix for import libraries that you link to.
 
      The prefix to use for the name of an import library if used on this
      platform.
 
      CMAKE_IMPORT_LIBRARY_PREFIX_<LANG> overrides this for language <LANG>.
 
  CMAKE_IMPORT_LIBRARY_SUFFIX
      The suffix for import libraries that you link to.
 
      The suffix to use for the end of an import library if used on this
      platform.
 
      CMAKE_IMPORT_LIBRARY_SUFFIX_<LANG> overrides this for language <LANG>.
 
  CMAKE_LINK_LIBRARY_SUFFIX
      The suffix for libraries that you link to.
 
      The suffix to use for the end of a library, .lib on Windows.
 
  CMAKE_MAJOR_VERSION
      The Major version of cmake (i.e.  the 2 in 2.X.X)
 
      This specifies the major version of the CMake executable being run.
 
  CMAKE_MAKE_PROGRAM
      See CMAKE_BUILD_TOOL.
 
      This variable is around for backwards compatibility, see
      CMAKE_BUILD_TOOL.
 
  CMAKE_MINOR_VERSION
      The Minor version of cmake (i.e.  the 4 in X.4.X).
 
      This specifies the minor version of the CMake executable being run.
 
  CMAKE_PARENT_LIST_FILE
      Full path to the parent listfile of the one currently being processed.
 
      As CMake processes the listfiles in your project this variable will
      always be set to the listfile that included or somehow invoked the one
      currently being processed.  See also CMAKE_CURRENT_LIST_FILE.
 
  CMAKE_PATCH_VERSION
      The patch version of cmake (i.e.  the 3 in X.X.3).
 
      This specifies the patch version of the CMake executable being run.
 
  CMAKE_PROJECT_NAME
      The name of the current project.
 
      This specifies name of the current project from the closest inherited
      PROJECT command.
 
  CMAKE_RANLIB
      Name of randomizing tool for static libraries.
 
      This specifies name of the program that randomizes libraries on UNIX,
      not used on Windows, but may be present.
 
  CMAKE_ROOT
      Install directory for running cmake.
 
      This is the install root for the running CMake and the Modules
      directory can be found here.  This is commonly used in this format:
      ${CMAKE_ROOT}/Modules
 
  CMAKE_SHARED_LIBRARY_PREFIX
      The prefix for shared libraries that you link to.
 
      The prefix to use for the name of a shared library, lib on UNIX.
 
      CMAKE_SHARED_LIBRARY_PREFIX_<LANG> overrides this for language <LANG>.
 
  CMAKE_SHARED_LIBRARY_SUFFIX
      The suffix for shared libraries that you link to.
 
      The suffix to use for the end of a shared library, .dll on Windows.
 
      CMAKE_SHARED_LIBRARY_SUFFIX_<LANG> overrides this for language <LANG>.
 
  CMAKE_SHARED_MODULE_PREFIX
      The prefix for loadable modules that you link to.
 
      The prefix to use for the name of a loadable module on this platform.
 
      CMAKE_SHARED_MODULE_PREFIX_<LANG> overrides this for language <LANG>.
 
  CMAKE_SHARED_MODULE_SUFFIX
      The suffix for shared libraries that you link to.
 
      The suffix to use for the end of a loadable module on this platform
 
      CMAKE_SHARED_MODULE_SUFFIX_<LANG> overrides this for language <LANG>.
 
  CMAKE_SIZEOF_VOID_P
      Size of a void pointer.
 
      This is set to the size of a pointer on the machine, and is determined
      by a try compile.  If a 64 bit size is found, then the library search
      path is modified to look for 64 bit libraries first.
 
  CMAKE_SKIP_RPATH
      If true, do not add run time path information.
 
      If this is set to TRUE, then the rpath information is not added to
      compiled executables.  The default is to add rpath information if the
      platform supports it.This allows for easy running from the build tree.
 
  CMAKE_SOURCE_DIR
      The path to the top level of the source tree.
 
      This is the full path to the top level of the current CMake source
      tree.  For an in-source build, this would be the same as
      CMAKE_BINARY_DIR.
 
  CMAKE_STANDARD_LIBRARIES
      Libraries linked into every executable and shared library.
 
      This is the list of libraries that are linked into all executables and
      libraries.
 
  CMAKE_STATIC_LIBRARY_PREFIX
      The prefix for static libraries that you link to.
 
      The prefix to use for the name of a static library, lib on UNIX.
 
      CMAKE_STATIC_LIBRARY_PREFIX_<LANG> overrides this for language <LANG>.
 
  CMAKE_STATIC_LIBRARY_SUFFIX
      The suffix for static libraries that you link to.
 
      The suffix to use for the end of a static library, .lib on Windows.
 
      CMAKE_STATIC_LIBRARY_SUFFIX_<LANG> overrides this for language <LANG>.
 
  CMAKE_TWEAK_VERSION
      The tweak version of cmake (i.e.  the 1 in X.X.X.1).
 
      This specifies the tweak version of the CMake executable being run.
      Releases use tweak < 20000000 and development versions use the date
      format CCYYMMDD for the tweak level.
 
  CMAKE_USING_VC_FREE_TOOLS
      True if free visual studio tools being used.
 
      This is set to true if the compiler is Visual Studio free tools.
 
  CMAKE_VERBOSE_MAKEFILE
      Create verbose makefiles if on.
 
      This variable defaults to false.  You can set this variable to true to
      make CMake produce verbose makefiles that show each command line as it
      is used.
 
  CMAKE_VERSION
      The full version of cmake in major.minor.patch[.tweak[-id]] format.
 
      This specifies the full version of the CMake executable being run.
      This variable is defined by versions 2.6.3 and higher.  See variables
      CMAKE_MAJOR_VERSION, CMAKE_MINOR_VERSION, CMAKE_PATCH_VERSION, and
      CMAKE_TWEAK_VERSION for individual version components.  The [-id]
      component appears in non-release versions and may be arbitrary text.
 
  PROJECT_BINARY_DIR
      Full path to build directory for project.
 
      This is the binary directory of the most recent PROJECT command.
 
  PROJECT_NAME
      Name of the project given to the project command.
 
      This is the name given to the most recent PROJECT command.
 
  PROJECT_SOURCE_DIR
      Top level source directory for the current project.
 
      This is the source directory of the most recent PROJECT command.
 
  [Project name]_BINARY_DIR
      Top level binary directory for the named project.
 
      A variable is created with the name used in the PROJECT command, and
      is the binary directory for the project.  This can be useful when
      SUBDIR is used to connect several projects.
 
  [Project name]_SOURCE_DIR
      Top level source directory for the named project.
 
      A variable is created with the name used in the PROJECT command, and
      is the source directory for the project.  This can be useful when
      add_subdirectory is used to connect several projects.
 
------------------------------------------------------------------------------
Copyright
 
Copyright 2000-2009 Kitware, Inc., Insight Software Consortium.  All rights
reserved.
 
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are met:
 
Redistributions of source code must retain the above copyright notice, this
list of conditions and the following disclaimer.
 
Redistributions in binary form must reproduce the above copyright notice,
this list of conditions and the following disclaimer in the documentation
and/or other materials provided with the distribution.
 
Neither the names of Kitware, Inc., the Insight Software Consortium, nor the
names of their contributors may be used to endorse or promote products
derived from this software without specific prior written permission.
 
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
ARE DISCLAIMED.  IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
 
------------------------------------------------------------------------------
See Also
 
The following resources are available to get help using CMake:
 
  Home Page
      http://www.cmake.org
 
      The primary starting point for learning about CMake.
 
  Frequently Asked Questions
      http://www.cmake.org/Wiki/CMake_FAQ
 
      A Wiki is provided containing answers to frequently asked questions.
 
  Online Documentation
      http://www.cmake.org/HTML/Documentation.html
 
      Links to available documentation may be found on this web page.
 
  Mailing List
      http://www.cmake.org/HTML/MailingLists.html
 
      For help and discussion about using cmake, a mailing list is provided
      at cmake@cmake.org.  The list is member-post-only but one may sign up
      on the CMake web page.  Please first read the full documentation at
      http://www.cmake.org before posting questions to the list.
 
Summary of helpful links:
 
  Home: http://www.cmake.org
  Docs: http://www.cmake.org/HTML/Documentation.html
  Mail: http://www.cmake.org/HTML/MailingLists.html
  FAQ:  http://www.cmake.org/Wiki/CMake_FAQ
</pre>

Latest revision as of 12:52, 24 April 2018