Proposals:New Mesh Class

mtv ringtones cheap fioricet mp3 ringtones nextel ringtones adipex online xanax online free sagem ringtones diazepam online cheap clonazepam polyphonic ringtones cheap carisoprodol buy wellbutrin free kyocera ringtones ativan online viagra online lorazepam online cheap ultram free kyocera ringtones cheap alprazolam alltel ringtones ambien online cheap vicodin motorola ringtones sony ericsson ringtones punk ringtones buy viagra phentermine cheap xanax buy ultram cheap valium free cingular ringtones buy adipex cyclobenzaprine online propecia online tenuate online carisoprodol online cheap ultracet pharmacy online online free wwe ringtones diazepam online cheap xenical free nokia ringtones qwest ringtones cheap zanaflex cheap diazepam verizon ringtones free motorola ringtones cheap lortab buy prozac free ericsson ringtones cheap ortho cheap cyclobenzaprine cheap celexa free free ringtones online phentermine free cool ringtones prozac online free qwest ringtones order cialis free sprint ringtones cheap nexium real ringtones sagem ringtones free tracfone ringtones free nokia ringtones punk ringtones free mp3 ringtones sony ringtones buy ativan cheap hgh midi ringtones free alltel ringtones cheap flexeril free sony ericsson ringtones free motorola ringtones cheap vicodin free tracfone ringtones soma online levitra online motorola ringtones cheap didrex cheap sildenafil pharmacy online online zoloft online hydrocodone online free sony ringtones free cingular ringtones viagra online paxil online ambien online lortab online order hydrocodone vigrx online ativan online hgh online cheap sildenafil buy viagra buy ortho nextel ringtones lisinopril funny ringtones sony ericsson ringtones buy vicodin cheap hydrocodone cheap ativan mono ringtones clonazepam online levitra sprint ringtones cialis online sony ringtones order levitra zanaflex online but phentermine celexa online order ultracet wwe ringtones sharp ringtones buy norco online soma cheap ultracet cingular ringtones adipex online xenical online cheap albuterol cheap tenuate ortho online music ringtones sagem ringtones lisinopril online cheap meridia propecia online vigrx online cheap diethylpropion albuterol online mp3 ringtones cheap meridia free free ringtones ultram online cheap soma lortab online cheap sildenafil free nextel ringtones lorazepam online free funny ringtones diethylpropion online free free ringtones free funny ringtones cingular ringtones soma online free nokia ringtones clonazepam online zyban online clomid online prozac online online valium cheap lisinopril cheap meridia tramadol online free sharp ringtones midi ringtones cheap flexeril free real ringtones celexa online cheap zoloft free nextel ringtones ericsson ringtones music ringtones free mtv ringtones ultram online buy valium order viagra lorazepam online cheap cialis cheap phentermine buy nexium free samsung ringtones cheap norco meridia online free sprint ringtones buy rivotril carisoprodol online carisoprodol online buy cyclobenzaprine free qwest ringtones qwest ringtones cheap fioricet free verizon ringtones punk ringtones cheap hoodia pharmacy online online free tracfone ringtones tramadol online cheap rivotril cheap tramadol cheap didrex cheap fioricet music ringtones albuterol online nokia ringtones This document derives the motivation and implementation of a new Mesh Class and associated Filters and IO classes for ITK

Overview

itkQuadEdgeMesh (itkQEMesh) is a new data structure for surface meshes. It is more efficient than the current itkMesh for surface processing. However it cannot handle N-dimensional meshes. Hence itkMesh and itkQEMesh will coexist in future releases of ITK. This documents describes how itkQuadEdgeMesh will be integrated into ITK 3.2.

Integration issues

Here are the current issues

1: function vs filters

01/23/07
Operations in the QuadEdgeMesh are implemented in Function classes That derive from FunctionBase. We see your point on externalizing the methods from the QuadEdgeMesh, that's certainly compatible with the general ITK design. In your paper you explain that you preferred to use Functions instead of Filters in order to save memory. That is, to make changes in-place, as opposed to creating a copy of the mesh as output to a filter. That's a reasonable argument. I would suggest that we keep the function classes but we also offer them in the form of filters that allow to support const-correctness. Using the data-pipeline is also compatible with the VTK design.

update 01/24/07: eric
Providing those additional filters could be implemented as wrappers around the function classes (with an additional copy of the mesh) which shouldn't be too expensive to maintain. Thus support of const-correctness could thus be cheap.

2: inheritance vs link

01/23/07
QuadEdgeMeshLineCell deriving from the GeometricQuadEdge. This is a bit of a conceptual problem. I would suggest that we remove the inheritance from the QuadEdge, and replace it with the LineCell having a reference to the first GeometricQuadEdge of the local ring. The LineCell may provide a method such as (for example) GetFirstQuadEdge(), that will return a reference to the QuadEdge, and from that QuadEdge we could continue navigating the local topology. From the design point of view (and even the topology) it seems more appropriate to say that :
"The LineCell *has* a reference to a QuadEdge"
than to say that
"The LineCell *is* a QuadEdge"
in particular, considering that the LineCell is the equivalent of the "Physical Edge". The template parameter of the GeometricQuadEdge, still allows you to associate data with the QuadEdge.

update 01/24/07: kitware
Trying to elaborate on the reasons for having the LineCell to derive from the GeometricalQuadEdge, we are wondering if you intended the LineCell to be oriented. Was that part of your motivation ? We are suggesting to remove the inheritance of the LineCell from the GeometricalQuadEdge, and instead have the LineCell keep a pointer to the first of the 4 QuadEdges that will be created by the MakeEdge() method. Similar to how the PolygonCell is doing.

Update 01/24/07:Eric
The problem if you switch from inheritance to aggregation seems that you loose the coupling of the two objects. Consider a filter (or function class) that operates at the QuadEdge level and is written at this level (and we do this all the time). Then in order to the have the LineCell refering to the concerned QuadEdge to be modified in the proper way we would thus need to promote this code at the LineCell level (because a QuadEdge wouldn't "know" of the LineCell). This would make things much harder to write no ? You would need to navigate back and forth between the itk and QuadEdge level in order to keep them synchronized. Wouldn't you ?

Update 01/24/07:leo
When this code was written, Eric's explanation was right. It seemed very hard to make these two data structures (QE and cell-based meshes) compatible. As I just wrote to you, I'm working on solving this problem, but I haven't had the time to finish it.

Update 01/24/07:leo
It seemed simpler to do this to get the QE architecture working under a cell-based interface. Now, knowing a little bit more itk's architecture, I know that we can avoid this double derivation. I started working on this issue, but I haven't had time to finish it. Do you think it would be interesting to continue working on this? I hope to have some time starting next week.

Update 01/25/07:Luis
Yes, we think that it is worth to remove the double derivation. We are heading now to have the LineCell have a pointer to the first QuadEdge of the 4-tuple. It will also have the MakeEdge() method, to be called from the constructor. The MakeEdge() in the GeometricalQuadEdge will be removed.

Update 01/25/07:leo
The idea I've been developing is quite similar to Luis' suggestions. In fact, I've created a new CellInterface class that "keeps track" of QEs (by aggregation). I've tested this new implementation taking "native" itkMesh examples, changing just the template's instantiation and running them. So far, it works fine. Right now, I'm completing this implementation in order to cope with all CellInterface methods. I hope there will not be further suprises. The other idea I'm developing is related to dual meshes. The idea is to keep track, at the same time, of the primal and dual mesh. I hope to use this new representation to simplify simplex mesh-based algorithms, but I'm sure there are more applications to this.

3: Error management

01/23/07
There is not enough error management in the code. For example, there are methods implemented as

             ->GetRot()->GetRot()->GetRot()

that rely on the assumption that none of the intermediate calls return a null pointer. We are moving all these methods from the header file into the .cxx file, and inserting error management in them. The basic principle is that no method should crash. We can do error management by returning null pointers in the intermediate cases, or by throwing exceptions. The unit test should be such that any method could be called in any order, without making the class crash.

Update: 01/24/07: Eric
Fair enough. But we have the structural guarantee that this won't happen, since the edge algebra can NOT be corrupted IF you only manipulate it through Splice(). The only way (I can foresee) for your null pointer scenario to happen would be some exterior corruption of the data structure. Actually QuadEdge.SetRot() and it's SetOnext() counterpart shouldn't be public (are they actually are) but strongly restricted. If you look closer, you should see no occurence of SetRot() except for the constructor and you shouldn't find any occurence of SetOnext() except for the constructor and Splice(). How could you thus break the edge-algebra ?

4: Coding style: Method renaming

01/23/07
We will expand the current abridged names of methods, and for reference we will leave the original name in the Doxygen documentation, so that users can refer to the terms used in the paper.

5: allocation without desallocation

01/23/07
The QuadEdges that are allocated in the MakeEdge() method in the LineCell and in the GeometricalQuadEdge (formerly QEGeom), ...where are they deallocated ? We couldn't find any calls to the "delete"s that should match these "new". We are suggesting to add the deletes to the destructor of the GeometricalQuadEdge

update 01/24/07: eric
Doing so (i.e. removing the LineCell::MakeEdge() method) makes almost all the atomic tests of our test-suite to SegFault ! I know this looks kludgy (since LineCell::MakeEdge() seems to overload the QuadEdge::MakeEdge() while the codes are being almost the same) but is has to do with the fact that we wanted LineCell and QuadEdges to be tigthly coupled. And we couldn't come with a cleaner way of hooking things in order to obtain the proper result in the LineCell constructor (the only time I tried, I failed poorly).

Update 01/24/07: leo
Yep. Coupling QE's and cells forced a reimplementation of MakeEdge() in order to construct edges with the right types (primal and dual).

6: Reimplementation of MakeEdge()

01/23/07
Why is MakeEdge() reimplemented in the LineCell ? if it derives from the GeometricalQuadEdge and the method already exist in that class ? We are suggesting to remove the MakeEdge() method from the LineCell.

Update 01/24/07:eric
LineCell appeared quite late in the coding process (yes, we do such things) and were just introduced for compatibility with itk::Mesh. LineCells are not oriented. QuadEdges are.

Update 01/24/07: leo
They are not oriented. The problem comes from the desire to make QE's and cells working together with the same syntax. As I already wrote, I'm working on solving this.