ITK/Examples/Registration/MutualInformationAffine

MutualInformationAffine.cxx

<source lang="cpp">

1. include "itkImageRegistrationMethod.h"
2. include "itkAffineTransform.h"
3. include "itkMutualInformationImageToImageMetric.h"
4. include "itkGradientDescentOptimizer.h"
5. include "itkNormalizeImageFilter.h"
6. include "itkDiscreteGaussianImageFilter.h"
7. include "itkResampleImageFilter.h"
8. include "itkCastImageFilter.h"
9. include "itkCheckerBoardImageFilter.h"
10. include "itkEllipseSpatialObject.h"
11. include "itkSpatialObjectToImageFilter.h"
12. include "itkImageFileWriter.h"

const unsigned int Dimension = 2; typedef unsigned char PixelType;

typedef itk::Image< PixelType, Dimension > ImageType;

static void CreateEllipseImage(ImageType::Pointer image); static void CreateCircleImage(ImageType::Pointer image);

int main( int argc, char *argv[] ) {

 // Generate synthetic fixed and moving images
 ImageType::Pointer  fixedImage = ImageType::New();
 CreateCircleImage(fixedImage);
 ImageType::Pointer movingImage = ImageType::New();
 CreateEllipseImage(movingImage);

 // Write the two synthetic inputs
 typedef itk::ImageFileWriter< ImageType >  WriterType;

 WriterType::Pointer      fixedWriter =  WriterType::New();
 fixedWriter->SetFileName("fixed.png");
 fixedWriter->SetInput( fixedImage);
 fixedWriter->Update();

 WriterType::Pointer      movingWriter =  WriterType::New();
 movingWriter->SetFileName("moving.png");
 movingWriter->SetInput( movingImage);
 movingWriter->Update();

 // We use floats internally
 typedef   float                                    InternalPixelType;
 typedef itk::Image< float, Dimension> InternalImageType;

 // Normalize the images
 typedef itk::NormalizeImageFilter<ImageType, InternalImageType> NormalizeFilterType;

 NormalizeFilterType::Pointer fixedNormalizer = NormalizeFilterType::New();
 NormalizeFilterType::Pointer movingNormalizer = NormalizeFilterType::New();

 fixedNormalizer->SetInput(  fixedImage);
 movingNormalizer->SetInput( movingImage);

 // Smooth the normalized images
 typedef itk::DiscreteGaussianImageFilter<InternalImageType,InternalImageType> GaussianFilterType;

 GaussianFilterType::Pointer fixedSmoother  = GaussianFilterType::New();
 GaussianFilterType::Pointer movingSmoother = GaussianFilterType::New();

 fixedSmoother->SetVariance( 2.0 );
 movingSmoother->SetVariance( 2.0 );

 fixedSmoother->SetInput( fixedNormalizer->GetOutput() );
 movingSmoother->SetInput( movingNormalizer->GetOutput() );

 typedef itk::AffineTransform< double, Dimension > TransformType;
 typedef itk::GradientDescentOptimizer                  OptimizerType;
 typedef itk::LinearInterpolateImageFunction<
                                   InternalImageType,
                                   double             > InterpolatorType;
 typedef itk::ImageRegistrationMethod<
                                   InternalImageType,
                                   InternalImageType >  RegistrationType;
 typedef itk::MutualInformationImageToImageMetric<
                                         InternalImageType,
                                         InternalImageType >    MetricType;

 TransformType::Pointer      transform     = TransformType::New();
 OptimizerType::Pointer      optimizer     = OptimizerType::New();
 InterpolatorType::Pointer   interpolator  = InterpolatorType::New();
 RegistrationType::Pointer   registration  = RegistrationType::New();

 registration->SetOptimizer(     optimizer     );
 registration->SetTransform(     transform     );
 registration->SetInterpolator(  interpolator  );

 MetricType::Pointer         metric        = MetricType::New();
 registration->SetMetric( metric  );

 //  The metric requires a number of parameters to be selected, including
 //  the standard deviation of the Gaussian kernel for the fixed image
 //  density estimate, the standard deviation of the kernel for the moving
 //  image density and the number of samples use to compute the densities
 //  and entropy values. Details on the concepts behind the computation of
 //  the metric can be found in Section
 //  \ref{sec:MutualInformationMetric}.  Experience has
 //  shown that a kernel standard deviation of $0.4$ works well for images
 //  which have been normalized to a mean of zero and unit variance.  We
 //  will follow this empirical rule in this example.

 metric->SetFixedImageStandardDeviation(  0.4 );
 metric->SetMovingImageStandardDeviation( 0.4 );

 registration->SetFixedImage(    fixedSmoother->GetOutput()    );
 registration->SetMovingImage(   movingSmoother->GetOutput()   );

 fixedNormalizer->Update();
 ImageType::RegionType fixedImageRegion =
      fixedNormalizer->GetOutput()->GetBufferedRegion();
 registration->SetFixedImageRegion( fixedImageRegion );

 typedef RegistrationType::ParametersType ParametersType;
 ParametersType initialParameters( transform->GetNumberOfParameters() );

 // rotation matrix (identity)
 initialParameters[0] = 1.0;  // R(0,0)
 initialParameters[1] = 0.0;  // R(0,1)
 initialParameters[2] = 0.0;  // R(1,0)
 initialParameters[3] = 1.0;  // R(1,1)

 // translation vector
 initialParameters[4] = 0.0;
 initialParameters[5] = 0.0;

 registration->SetInitialTransformParameters( initialParameters );

 //  Software Guide : BeginLatex
 //
 //  We should now define the number of spatial samples to be considered in
 //  the metric computation. Note that we were forced to postpone this setting
 //  until we had done the preprocessing of the images because the number of
 //  samples is usually defined as a fraction of the total number of pixels in
 //  the fixed image.
 //
 //  The number of spatial samples can usually be as low as $1\%$ of the total
 //  number of pixels in the fixed image. Increasing the number of samples
 //  improves the smoothness of the metric from one iteration to another and
 //  therefore helps when this metric is used in conjunction with optimizers
 //  that rely of the continuity of the metric values. The trade-off, of
 //  course, is that a larger number of samples result in longer computation
 //  times per every evaluation of the metric.
 //
 //  It has been demonstrated empirically that the number of samples is not a
 //  critical parameter for the registration process. When you start fine
 //  tuning your own registration process, you should start using high values
 //  of number of samples, for example in the range of $20\%$ to $50\%$ of the
 //  number of pixels in the fixed image. Once you have succeeded to register
 //  your images you can then reduce the number of samples progressively until
 //  you find a good compromise on the time it takes to compute one evaluation
 //  of the Metric. Note that it is not useful to have very fast evaluations
 //  of the Metric if the noise in their values results in more iterations
 //  being required by the optimizer to converge. You must then study the
 //  behavior of the metric values as the iterations progress.

 const unsigned int numberOfPixels = fixedImageRegion.GetNumberOfPixels();

 const unsigned int numberOfSamples =
                       static_cast< unsigned int >( numberOfPixels * 0.01 );

 metric->SetNumberOfSpatialSamples( numberOfSamples );

 //optimizer->SetLearningRate( 15.0 ); //"All the sampled point mapped to outside of the moving image"
 //optimizer->SetLearningRate( 1.0 );
 optimizer->SetLearningRate( 0.1 );
 optimizer->SetNumberOfIterations( 1000 );
 optimizer->MaximizeOn(); // We want to maximize mutual information (the default of the optimizer is to minimize)

 // Note that large values of the learning rate will make the optimizer
 // unstable. Small values, on the other hand, may result in the optimizer
 // needing too many iterations in order to walk to the extrema of the cost
 // function. The easy way of fine tuning this parameter is to start with
 // small values, probably in the range of $\{5.0,10.0\}$. Once the other
 // registration parameters have been tuned for producing convergence, you
 // may want to revisit the learning rate and start increasing its value until
 // you observe that the optimization becomes unstable.  The ideal value for
 // this parameter is the one that results in a minimum number of iterations
 // while still keeping a stable path on the parametric space of the
 // optimization. Keep in mind that this parameter is a multiplicative factor
 // applied on the gradient of the Metric. Therefore, its effect on the
 // optimizer step length is proportional to the Metric values themselves.
 // Metrics with large values will require you to use smaller values for the
 // learning rate in order to maintain a similar optimizer behavior.

 try
   {
   registration->Update();
   std::cout << "Optimizer stop condition: "
             << registration->GetOptimizer()->GetStopConditionDescription()
             << std::endl;
   }
 catch( itk::ExceptionObject & err )
   {
   std::cout << "ExceptionObject caught !" << std::endl;
   std::cout << err << std::endl;
   return EXIT_FAILURE;
   }

 ParametersType finalParameters = registration->GetLastTransformParameters();

 std::cout << "Final Parameters: " << finalParameters << std::endl;

 unsigned int numberOfIterations = optimizer->GetCurrentIteration();

 double bestValue = optimizer->GetValue();

 // Print out results
 std::cout << std::endl;
 std::cout << "Result = " << std::endl;
 std::cout << " Iterations    = " << numberOfIterations << std::endl;
 std::cout << " Metric value  = " << bestValue          << std::endl;
 std::cout << " Numb. Samples = " << numberOfSamples    << std::endl;

 typedef itk::ResampleImageFilter<
                           ImageType,
                           ImageType >    ResampleFilterType;

 TransformType::Pointer finalTransform = TransformType::New();

 finalTransform->SetParameters( finalParameters );
 finalTransform->SetFixedParameters( transform->GetFixedParameters() );

 ResampleFilterType::Pointer resample = ResampleFilterType::New();

 resample->SetTransform( finalTransform );
 resample->SetInput( movingImage);

 resample->SetSize(    fixedImage->GetLargestPossibleRegion().GetSize() );
 resample->SetOutputOrigin(  fixedImage->GetOrigin() );
 resample->SetOutputSpacing( fixedImage->GetSpacing() );
 resample->SetOutputDirection( fixedImage->GetDirection() );
 resample->SetDefaultPixelValue( 100 );

 WriterType::Pointer      writer =  WriterType::New();
 writer->SetFileName("output.png");
 writer->SetInput( resample->GetOutput()   );
 writer->Update();

 return EXIT_SUCCESS;

}

void CreateEllipseImage(ImageType::Pointer image) {

 typedef itk::EllipseSpatialObject< Dimension >   EllipseType;

 typedef itk::SpatialObjectToImageFilter<
   EllipseType, ImageType >   SpatialObjectToImageFilterType;

 SpatialObjectToImageFilterType::Pointer imageFilter =
   SpatialObjectToImageFilterType::New();

 ImageType::SizeType size;
 size[ 0 ] =  100;
 size[ 1 ] =  100;

 imageFilter->SetSize( size );

 ImageType::SpacingType spacing;
 spacing.Fill(1);
 imageFilter->SetSpacing(spacing);

 EllipseType::Pointer ellipse    = EllipseType::New();
 EllipseType::ArrayType radiusArray;
 radiusArray[0] = 10;
 radiusArray[1] = 20;
 ellipse->SetRadius(radiusArray);

 typedef EllipseType::TransformType                 TransformType;
 TransformType::Pointer transform = TransformType::New();
 transform->SetIdentity();

 TransformType::OutputVectorType  translation;
 TransformType::CenterType        center;

 translation[ 0 ] =  65;
 translation[ 1 ] =  45;
 transform->Translate( translation, false );

 ellipse->SetObjectToParentTransform( transform );

 imageFilter->SetInput(ellipse);

 ellipse->SetDefaultInsideValue(255);
 ellipse->SetDefaultOutsideValue(0);
 imageFilter->SetUseObjectValue( true );
 imageFilter->SetOutsideValue( 0 );

 imageFilter->Update();

 image->Graft(imageFilter->GetOutput());

}

void CreateCircleImage(ImageType::Pointer image) {

typedef itk::EllipseSpatialObject< Dimension >   EllipseType;

 typedef itk::SpatialObjectToImageFilter<
   EllipseType, ImageType >   SpatialObjectToImageFilterType;

 SpatialObjectToImageFilterType::Pointer imageFilter =
   SpatialObjectToImageFilterType::New();

 ImageType::SizeType size;
 size[ 0 ] =  100;
 size[ 1 ] =  100;

 imageFilter->SetSize( size );

 ImageType::SpacingType spacing;
 spacing.Fill(1);
 imageFilter->SetSpacing(spacing);

 EllipseType::Pointer ellipse    = EllipseType::New();
 EllipseType::ArrayType radiusArray;
 radiusArray[0] = 10;
 radiusArray[1] = 10;
 ellipse->SetRadius(radiusArray);

 typedef EllipseType::TransformType                 TransformType;
 TransformType::Pointer transform = TransformType::New();
 transform->SetIdentity();

 TransformType::OutputVectorType  translation;
 TransformType::CenterType        center;

 translation[ 0 ] =  50;
 translation[ 1 ] =  50;
 transform->Translate( translation, false );

 ellipse->SetObjectToParentTransform( transform );

 imageFilter->SetInput(ellipse);

 ellipse->SetDefaultInsideValue(255);
 ellipse->SetDefaultOutsideValue(0);
 imageFilter->SetUseObjectValue( true );
 imageFilter->SetOutsideValue( 0 );

 imageFilter->Update();

 image->Graft(imageFilter->GetOutput());

} </source>

CMakeLists.txt

<syntaxhighlight lang="cmake"> cmake_minimum_required(VERSION 3.9.5)

project(MutualInformationAffine)

find_package(ITK REQUIRED) include(${ITK_USE_FILE}) if (ITKVtkGlue_LOADED)

 find_package(VTK REQUIRED)
 include(${VTK_USE_FILE})

endif()

add_executable(MutualInformationAffine MACOSX_BUNDLE MutualInformationAffine.cxx)

if( "${ITK_VERSION_MAJOR}" LESS 4 )

 target_link_libraries(MutualInformationAffine ITKReview ${ITK_LIBRARIES})

else( "${ITK_VERSION_MAJOR}" LESS 4 )

 target_link_libraries(MutualInformationAffine ${ITK_LIBRARIES})

endif( "${ITK_VERSION_MAJOR}" LESS 4 )

</syntaxhighlight>

Download and Build MutualInformationAffine

Click here to download MutualInformationAffine and its CMakeLists.txt file. Once the tarball MutualInformationAffine.tar has been downloaded and extracted,

cd MutualInformationAffine/build

• If ITK is installed:

cmake ..

• If ITK is not installed but compiled on your system, you will need to specify the path to your ITK build:

cmake -DITK_DIR:PATH=/home/me/itk_build ..

Build the project:

make

and run it:

./MutualInformationAffine

WINDOWS USERS PLEASE NOTE: Be sure to add the ITK bin directory to your path. This will resolve the ITK dll's at run time.

Building All of the Examples

Many of the examples in the ITK Wiki Examples Collection require VTK. You can build all of the the examples by following these instructions. If you are a new VTK user, you may want to try the Superbuild which will build a proper ITK and VTK.

ItkVtkGlue

ITK >= 4

For examples that use QuickView (which depends on VTK), you must have built ITK with Module_ITKVtkGlue=ON.

ITK < 4

Some of the ITK Examples require VTK to display the images. If you download the entire ITK Wiki Examples Collection, the ItkVtkGlue directory will be included and configured. If you wish to just build a few examples, then you will need to download ItkVtkGlue and build it. When you run cmake it will ask you to specify the location of the ItkVtkGlue binary directory.