[vtkusers] What ditermines whether the slice order should be reversed?

[Liu_tj]

Hi, David,

Actually in my current code I use vtkImageFlip to flip the image data to solve the slice display orientation issue on coronal and saggital view as follow:

        vtkDICOMReader* reader = vtkDICOMReader::New();
        reader->SetFileNames(vtkDICOMFilePaths);
        reader->Update();
        vtkImageFlip* flip = vtkImageFlip::New();
        flip->SetInputConnection(reader->GetOutputPort());
        flip->SetFilteredAxis(2);
        flip->Update();
        vtkImageData* imageData = flip->GetOutput();



Thanks
Liu Peng


在2017-08-29，"David Gobbi" <david.gobbi at gmail.com> 写道： -----原始邮件-----
发件人:"David Gobbi" <david.gobbi at gmail.com>
发送时间:2017年08月29日 星期二
收件人:"Liu_tj" <tjlp at netease.com>
抄送:"vtkusers" <vtkusers at vtk.org>
主题:Re: Re: Re: What ditermines whether the slice order should be reversed?


Hi Liu Peng,


For vtk-dicom, that would actually be version 0.7.1 (the current version is 0.8.5).


It is possible that you have run into this bug, which was fixed in 0.8.3:
https://github.com/dgobbi/vtk-dicom/issues/132

The work-around for the bug is reader->SetMemoryRowOrderToFileNative().  See here for more info:
http://dgobbi.github.io/vtk-dicom/doc/api/image_orientation.html


Unfortunately, calling SetMemoryRowOrderToFileNative() doesn't work very well with vtkImageViewer or vtkImageViewer2, since these "viewer" classes insist on images that are in "bottom-to-top" order (DICOM images are natively in top-to-bottom order).  However, if you use vtkImageActor or vtkImageSlice to display your images, then you can set the camera so that "up" is in the correct direction.


The vtkDICOMReader uses ImageOrientationPatient (0020,0037) and ImagePositionPatient (0020,0032) to put the slices in order.  These attributes are more reliable and more precise than PatientPosition (0018,5100).


Cheers,
 - David








On Mon, Aug 28, 2017 at 7:03 PM, Liu_tj <tjlp at netease.com> wrote:
Hi, David,

I forgot to mention the verison. The VTK and vtk-DICOM version are both 7.1


Thanks
Liu Peng


在2017-08-28，"David Gobbi" <david.gobbi at gmail.com> 写道： -----原始邮件-----
发件人:"David Gobbi" <david.gobbi at gmail.com>
发送时间:2017年08月28日 星期一
收件人:"Liu_tj" <tjlp at netease.com>
抄送:"vtkusers" <vtkusers at vtk.org>
主题:Re: Re: What ditermines whether the slice order should be reversed?



Hi Liu Peng,


What versions of VTK and vtk-dicom you are using?


 - David  


On Mon, Aug 28, 2017 at 12:31 AM, Liu_tj <tjlp at netease.com> wrote:

Hi, David,



As far as I know, in the RCS system, the direction of Z axis is from foot to head.So by default, the slice order in your dicom reader is consistent with the RCS system.When the reader sorts the slices, does it consider the Patient Postion tag(0080,5100)? Some doctors might use some DICOM tools which the slice order is from head to foot and get used to that.

My code block for load slices is as follow:

       vtkStringArray* vtkDICOMFilePaths = vtkStringArray::New();
        vtkDICOMFilePaths->SetNumberOfValues(aDICOMFilePaths->Length);
        for(int i = 0; i < aDICOMFilePaths->Length; i ++)
        {
            String^ filePath = aDICOMFilePaths[i];
            const char* filePathByChars = MDKStringUtility::NStringToChars(filePath);

            vtkDICOMFilePaths->SetValue(i, filePathByChars);
        }

        vtkDICOMReader* reader = vtkDICOMReader::New();
        vtkImageData* imageData = reader->GetOutput();

Thanks
Liu Peng
在2017-08-28，"David Gobbi" <david.gobbi at gmail.com> 写道： -----原始邮件-----
发件人:"David Gobbi" <david.gobbi at gmail.com>
发送时间:2017年08月28日 星期一
收件人:"Liu_tj" <tjlp at netease.com>
抄送:"vtkusers" <vtkusers at vtk.org>
主题:Re: What ditermines whether the slice order should be reversed?



Hi Liu Peng,


The vtkDICOMReader sorts according to the Image Plane Module:
http://dicom.nema.org/MEDICAL/dicom/current/output/chtml/part03/sect_C.7.6.2.html
That is, the slices are sorted in a manner such that the VTK image data has a right-handed coordinate system (called an RCS in the link above).


Sorting the slices to get an RCS means that sometimes the slices will be sorted the same as the InstanceNumber, and sometimes they will be sorted opposite to InstanceNumber, depending on the order in which scanner ordered the slices.


You can perform the sorting yourself by calling reader->SortingOff().  If Sorting is Off, the reader will take the slices in the same order as the vtkStringArray that you passed to reader->SetFileNames().


If you send me the block of code where you set up and call the reader, then I might be able to provide more help.  Don't forget to also say what versions of VTK and vtk-dicom you are using.


Cheers,
 - David






On Sun, Aug 27, 2017 at 10:41 AM, Liu_tj <tjlp at netease.com> wrote:

Hi,


I have a question about the DICOM slice order. I use the DICOM reader by David Gobbi to read the slice series to vtkImageData. And I found that the oder is the same as the order by DICOM instanceNumber tag. However, some doctors tell me that the order should be reversed because the scan should start from head to foot.



@David, if I need to reverse, how to achieve that by your DICOM reader?


Thanks
Liu Peng


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://public.kitware.com/pipermail/vtkusers/attachments/20170829/4a596969/attachment.html>