[vtkusers] New

Anka Kochanowska pluszcz at gmail.com
Wed Aug 14 10:50:00 EDT 2013 

does lib folder contain cmake/vtk-6.0 and VTKConfig.cmake?
If yes, the installation was fine and you may go back to your examples.


Anka



On Wed, Aug 14, 2013 at 10:35 AM, Altamash Abbasi
<altamashabbasi at gmail.com>wrote:

> yeah yeah it contains the lib folder now what should i do???
>
>
> On Wed, Aug 14, 2013 at 4:34 PM, Altamash Abbasi <altamashabbasi at gmail.com
> > wrote:
>
>> all is done but the path that I provided to CMAKE_INSTALL_PREFIX is
>> still empty . . . like the directory is still empty . . .
>>
>>
>> On Wed, Aug 14, 2013 at 4:30 PM, Altamash Abbasi <
>> altamashabbasi at gmail.com> wrote:
>>
>>> basically i'm from islamabad but i came to germany for study purposes .
>>> . .
>>>
>>>
>>> On Wed, Aug 14, 2013 at 4:29 PM, Anka Kochanowska <pluszcz at gmail.com>wrote:
>>>
>>>> Your google page says, you are from Islamabad. I know nothing about
>>>> OpenFoam, so I will not be able to follow you there.
>>>>
>>>> Please, keep your peoblem messages on vtkusers list.
>>>> Anka
>>>>
>>>>
>>>>
>>>> On Wed, Aug 14, 2013 at 10:26 AM, Altamash Abbasi <
>>>> altamashabbasi at gmail.com> wrote:
>>>>
>>>>> sorry anka actually i'm out of mind for working so much on VTK.. Then
>>>>> i wil connect VTK with OpenFOAM . . . i'm abbasi from germany ..
>>>>>
>>>>>
>>>>> On Wed, Aug 14, 2013 at 4:24 PM, Anka Kochanowska <pluszcz at gmail.com>wrote:
>>>>>
>>>>>> SVP, I am not u, and r is not any action I would perform.
>>>>>> We are not writing SMS on a smartphone.
>>>>>> Anka
>>>>>>
>>>>>>
>>>>>>
>>>>>> On Wed, Aug 14, 2013 at 10:21 AM, Altamash Abbasi <
>>>>>> altamashabbasi at gmail.com> wrote:
>>>>>>
>>>>>>> yeah i did all things like u said  . . . now make is running and
>>>>>>> it's 65% completed . . . I'll let u know the results . . . because u r
>>>>>>> familiar with my problem . . . by the way thanks for helping me . . .
>>>>>>>
>>>>>>>
>>>>>>> On Wed, Aug 14, 2013 at 4:17 PM, Anka Kochanowska <pluszcz at gmail.com
>>>>>>> > wrote:
>>>>>>>
>>>>>>>> just run cmake indicating path to vtk 6 source directory
>>>>>>>> Anka
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> On Wed, Aug 14, 2013 at 9:55 AM, Altamash Abbasi <
>>>>>>>> altamashabbasi at gmail.com> wrote:
>>>>>>>>
>>>>>>>>> cmake path_to_source              I DIDNT GET THIS THING . . .
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> On Wed, Aug 14, 2013 at 3:50 PM, Anka Kochanowska <
>>>>>>>>> pluszcz at gmail.com> wrote:
>>>>>>>>>
>>>>>>>>>> in the build directory:
>>>>>>>>>>
>>>>>>>>>> make
>>>>>>>>>> make install
>>>>>>>>>>
>>>>>>>>>> Your build directory may be corrupted now, I would start   from
>>>>>>>>>> scratch
>>>>>>>>>> - remove everything from build directory
>>>>>>>>>> - srtill in build directory:
>>>>>>>>>> cmake path_to_source
>>>>>>>>>> make
>>>>>>>>>> make install
>>>>>>>>>>
>>>>>>>>>> Anka
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> On Wed, Aug 14, 2013 at 9:46 AM, Altamash Abbasi <
>>>>>>>>>> altamashabbasi at gmail.com> wrote:
>>>>>>>>>>
>>>>>>>>>>> i've given the same path as u gave me . . . i pressed "g" and
>>>>>>>>>>> its complete now . . . But vtk6_installed directory is empty . . . now what
>>>>>>>>>>> i do??
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> On Wed, Aug 14, 2013 at 3:44 PM, Anka Kochanowska <
>>>>>>>>>>> pluszcz at gmail.com> wrote:
>>>>>>>>>>>
>>>>>>>>>>>> Why not use the one I proposed:
>>>>>>>>>>>> /home/stame1/software/VTK6_installed
>>>>>>>>>>>>  Anka
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> On Wed, Aug 14, 2013 at 9:40 AM, Altamash Abbasi <
>>>>>>>>>>>> altamashabbasi at gmail.com> wrote:
>>>>>>>>>>>>
>>>>>>>>>>>>> to which path ?? like i've vtk6 in software directory . .. i
>>>>>>>>>>>>> create a new director in software directory to build . . .
>>>>>>>>>>>>>
>>>>>>>>>>>>> /home/stame1/software in this directory i'm doing all things .
>>>>>>>>>>>>> . .
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> On Wed, Aug 14, 2013 at 3:37 PM, Anka Kochanowska <
>>>>>>>>>>>>> pluszcz at gmail.com> wrote:
>>>>>>>>>>>>>
>>>>>>>>>>>>>> You do not have to create it, just set CMAKE_INSTALL_PREFIX
>>>>>>>>>>>>>> to the new path.
>>>>>>>>>>>>>> Do not  build and install in the same directory. As a matter
>>>>>>>>>>>>>> of fact, avoiding building in the source directory also.
>>>>>>>>>>>>>> Anka
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> On Wed, Aug 14, 2013 at 9:34 AM, Altamash Abbasi <
>>>>>>>>>>>>>> altamashabbasi at gmail.com> wrote:
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> while building i gave the same path  to CMAKE_INSTALL_PREFIX
>>>>>>>>>>>>>>> i.e where i build the files . . . should i create a new directory in
>>>>>>>>>>>>>>> software folder and give that path to CMAKE_INSTALL_PREFIX
>>>>>>>>>>>>>>> ????. . .
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> On Wed, Aug 14, 2013 at 3:28 PM, Anka Kochanowska <
>>>>>>>>>>>>>>> pluszcz at gmail.com> wrote:
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> The path should be something like that:
>>>>>>>>>>>>>>>> /opt/vtk-6.0/lib/cmake/vtk-6.0
>>>>>>>>>>>>>>>> There is no CMakeFiles directory in the installed
>>>>>>>>>>>>>>>> directory, either you did not install or you installed in the wrong
>>>>>>>>>>>>>>>> directory.
>>>>>>>>>>>>>>>> Please give us the absolute path to your build directory
>>>>>>>>>>>>>>>> and the absolute path to your install directory.
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> When you configured cmake to build vtk, what did you set as
>>>>>>>>>>>>>>>> CMAKE_INSTALL_PREFIX?
>>>>>>>>>>>>>>>> If you never set this variable, the default should be
>>>>>>>>>>>>>>>> /usr/local and probably you have no permission to install there.
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Maybe try to run cmake again and set CMAKE_INSTALL_PREFIX
>>>>>>>>>>>>>>>> to  /home/stame1/software/VTK6_installed (or something
>>>>>>>>>>>>>>>> other instead of VTK6_installed), then set VTK_DIR to the new path.
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Anka
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> On Wed, Aug 14, 2013 at 9:16 AM, Altamash Abbasi <
>>>>>>>>>>>>>>>> altamashabbasi at gmail.com> wrote:
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> there is no VTKConfig.cmake in lib/cmake/vtk6 but there
>>>>>>>>>>>>>>>>> is a file in CMakeFiles directory . . . its path is
>>>>>>>>>>>>>>>>> /home/stame1/software/VTKBin/CMakeFiles . . .
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> On Wed, Aug 14, 2013 at 3:11 PM, Anka Kochanowska <
>>>>>>>>>>>>>>>>> pluszcz at gmail.com> wrote:
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> is there VTKConfig.cmake in lib/cmake/vtk6.0.0?
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> (As I said, I do not use vtk 6, so I do not know well the
>>>>>>>>>>>>>>>>>> directory structure)
>>>>>>>>>>>>>>>>>>  Anka
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> On Wed, Aug 14, 2013 at 9:09 AM, Altamash Abbasi <
>>>>>>>>>>>>>>>>>> altamashabbasi at gmail.com> wrote:
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> /home/stame1/software/VTKBin . . . this is the installed
>>>>>>>>>>>>>>>>>>> vtk 6 path . .. and there is also lib/cmake/vtk6.0.0 directory in it . . .
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> On Wed, Aug 14, 2013 at 3:05 PM, Anka Kochanowska <
>>>>>>>>>>>>>>>>>>> pluszcz at gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> What is the installed vtk 6 path? Is there lib/vtk-6..
>>>>>>>>>>>>>>>>>>>> directory in it?
>>>>>>>>>>>>>>>>>>>> If not, the installation may not be good.
>>>>>>>>>>>>>>>>>>>> Anka
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> On Wed, Aug 14, 2013 at 9:02 AM, Altamash Abbasi <
>>>>>>>>>>>>>>>>>>>> altamashabbasi at gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> using "make" and "make install" command ??? i've also
>>>>>>>>>>>>>>>>>>>>> done this but still it' jam . . .
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> On Wed, Aug 14, 2013 at 3:00 PM, Anka Kochanowska <
>>>>>>>>>>>>>>>>>>>>> pluszcz at gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>> After compiling vtk, install it, then build your
>>>>>>>>>>>>>>>>>>>>>> examples using the path to installation directory
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>> Anka
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>> On Wed, Aug 14, 2013 at 8:57 AM, Altamash Abbasi <
>>>>>>>>>>>>>>>>>>>>>> altamashabbasi at gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>> so guys whats the solution of my problem . . .
>>>>>>>>>>>>>>>>>>>>>>> Atleast tell me what to do . . .
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>> On Wed, Aug 14, 2013 at 2:46 PM, Altamash Abbasi <
>>>>>>>>>>>>>>>>>>>>>>> altamashabbasi at gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>> I've not installed i've just compiled using this
>>>>>>>>>>>>>>>>>>>>>>>> command acctually i'm using LINUX...
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>> ccmake ../VTKBin
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>> On Wed, Aug 14, 2013 at 2:44 PM, Bill Lorensen <
>>>>>>>>>>>>>>>>>>>>>>>> bill.lorensen at gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>> Who installed the vtk you are using?
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>> On Wed, Aug 14, 2013 at 8:44 AM, Altamash Abbasi <
>>>>>>>>>>>>>>>>>>>>>>>>> altamashabbasi at gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>> no VTKConfig.cmake is not in that directory . . .
>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>> On Wed, Aug 14, 2013 at 2:42 PM, Altamash Abbasi
>>>>>>>>>>>>>>>>>>>>>>>>>> <altamashabbasi at gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>> No bill it's not working . . . Sorry
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>> On Wed, Aug 14, 2013 at 2:42 PM, Bill Lorensen <
>>>>>>>>>>>>>>>>>>>>>>>>>>> bill.lorensen at gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>> Does "Yeah Bill" mean it worked?
>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Wed, Aug 14, 2013 at 8:40 AM, Altamash
>>>>>>>>>>>>>>>>>>>>>>>>>>>> Abbasi <altamashabbasi at gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Yeah BILL
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Wed, Aug 14, 2013 at 2:40 PM, Altamash
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Abbasi <altamashabbasi at gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Yeah Anka I ve
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Wed, Aug 14, 2013 at 2:39 PM, Altamash
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Abbasi <altamashabbasi at gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> /home/stame1/software/ in this path VTK 6 is
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> installed and /home/stame1/software/VTKBin config file is saved . . .
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Wed, Aug 14, 2013 at 2:36 PM, Anka
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Kochanowska <pluszcz at gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Absolute path is something in the form
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> /home/users/c/computerhope/public_html/cgi-bin
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> you have to find the path to the directory
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> where your vtk 6 is installed.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Anka
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Wed, Aug 14, 2013 at 8:33 AM, Altamash
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Abbasi <altamashabbasi at gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> it' name is Software
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Wed, Aug 14, 2013 at 2:33 PM, Anka
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Kochanowska <pluszcz at gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> What is the absolute directory path where
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> you installed vtk 6?
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Anka
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Wed, Aug 14, 2013 at 8:29 AM, Altamash
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Abbasi <altamashabbasi at gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> it's name is VTKBin . . .
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Wed, Aug 14, 2013 at 2:27 PM, Bill
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Lorensen <bill.lorensen at gmail.com>wrote:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> What is the name of the directory that
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> contains VTKConfig.cmake?
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> When you configure using cmake, set
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> the VTK_DIR cmake cache entry to the directory
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>    containing VTKConfig.cmake.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Wed, Aug 14, 2013 at 8:17 AM,
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Altamash Abbasi <
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> altamashabbasi at gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> here is my vtkConfig.cmake file . . .
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> . what should i do with it . . . that will help me in running the problem
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> #-----------------------------------------------------------------------------
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> #
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> # VTKConfig.cmake - VTK CMake
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> configuration file for external projects.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> #
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> # This file is configured by VTK and
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> used by the UseVTK.cmake module
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> # to load VTK's settings for an
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> external project.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> set(VTK_MODULES_DIR
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> "/home/stame1/software/VTKBin/lib/cmake/vtk-6.0/Modules")
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> # The C and C++ flags added by VTK to
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> the cmake-configured flags.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> SET(VTK_REQUIRED_C_FLAGS "")
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> SET(VTK_REQUIRED_CXX_FLAGS "
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> -Wno-deprecated")
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> SET(VTK_REQUIRED_EXE_LINKER_FLAGS "")
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> SET(VTK_REQUIRED_SHARED_LINKER_FLAGS
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> "")
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> SET(VTK_REQUIRED_MODULE_LINKER_FLAGS
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> "")
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> # The VTK version number
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> SET(VTK_MAJOR_VERSION "6")
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> SET(VTK_MINOR_VERSION "0")
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> SET(VTK_BUILD_VERSION "0")
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> # The location of the UseVTK.cmake
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> file.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> SET(VTK_CMAKE_DIR
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> "/home/stame1/software/VTK6.0.0/CMake")
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> SET(VTK_USE_FILE
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> "${VTK_CMAKE_DIR}/UseVTK.cmake")
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> #-----------------------------------------------------------------------------
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> # Load requested modules.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> # List of available VTK modules.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> set(VTK_MODULES_ENABLED)
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> # Determine list of available
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> VTK-modules by scanning the VTK_MODULES_DIR.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> file(GLOB config_files RELATIVE
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> "${VTK_MODULES_DIR}" "${VTK_MODULES_DIR}/*.cmake")
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> foreach (_file ${config_files})
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>   if (NOT "${_file}" MATCHES
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> "[^\\-]+-[a-zA-Z]+\\.cmake")
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>     string(REGEX REPLACE "\\.cmake$"
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> "" _module "${_file}")
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>     list(APPEND VTK_MODULES_ENABLED
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> "${_module}")
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>   endif()
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> endforeach()
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> # Import VTK targets.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> set(VTK_CONFIG_TARGETS_FILE
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> "/home/stame1/software/VTKBin/VTKTargets.cmake")
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> if(NOT TARGET vtkCommonCore)
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>   include("${VTK_CONFIG_TARGETS_FILE}")
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> endif()
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> # Load module interface macros.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> include("/home/stame1/software/VTK6.0.0/CMake/vtkModuleAPI.cmake")
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> # Compute set of requested modules.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> if(VTK_FIND_COMPONENTS)
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>   # Specific modules requested by
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> find_package(VTK).
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>   set(VTK_MODULES_REQUESTED
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> "${VTK_FIND_COMPONENTS}")
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> elseif(NOT "${CMAKE_VERSION}"
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> VERSION_GREATER 2.8.4.20110407)
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>   # CMake 2.8.4 and lower do not
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> forward the components list through
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>   # their FindVTK.cmake module, so
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> unless the application called
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>   #
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>   #   find_package(VTK NO_MODULE ...)
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>   #
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>   # then only the per-component
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> variables VTK_FIND_REQUIRED_<mod> will
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>   # have leaked through.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>   set(VTK_MODULES_REQUESTED "")
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>   get_cmake_property(_vars VARIABLES)
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>   foreach(v IN LISTS _vars)
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>     if("x${v}" MATCHES
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> "^xVTK_FIND_REQUIRED_" AND ${v})
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>       string(REGEX REPLACE
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> "^VTK_FIND_REQUIRED_" "" _mod "${v}")
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>       list(APPEND
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> VTK_MODULES_REQUESTED ${_mod})
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>     endif()
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>   endforeach()
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> endif()
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> if(NOT VTK_MODULES_REQUESTED)
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>   # No specific modules requested.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>  Use all of them.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>   set(VTK_MODULES_REQUESTED
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> "${VTK_MODULES_ENABLED}")
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> endif()
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> # Load requested modules and their
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> dependencies into variables:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> #  VTK_DEFINITIONS     = Preprocessor
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> definitions
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> #  VTK_LIBRARIES       = Libraries to
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> link
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> #  VTK_INCLUDE_DIRS    = Header file
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> search path
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> #  VTK_LIBRARY_DIRS    = Library
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> search path (for outside dependencies)
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> vtk_module_config(VTK
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ${VTK_MODULES_REQUESTED})
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> #-----------------------------------------------------------------------------
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> # VTK global configuration options.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> SET(VTK_BUILD_SHARED_LIBS "ON")
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> SET(VTK_LEGACY_REMOVE "OFF")
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> SET(VTK_LEGACY_SILENT "OFF")
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> SET(VTK_WRAP_PYTHON "OFF")
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> SET(VTK_WRAP_TCL "OFF")
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> SET(VTK_WRAP_JAVA "OFF")
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> # Do not add options or information
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> here that is specific to a
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> # particular module.  Instead set
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> <module>_EXPORT_OPTIONS and/or
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> # <module>_EXPORT_CODE_BUILD and
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> <module>_EXPORT_CODE_INSTALL
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> # at the top of the module
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> CMakeLists.txt file.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Wed, Aug 14, 2013 at 2:08 PM,
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Altamash Abbasi <
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> altamashabbasi at gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> stame1 at itlrstud044:~/software/SimplePointsReader/build>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> make
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>  make[2]: *** No rule to make target
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> »/home/stame1/software/VTKBin/lib/libvtkfreetype-6.0.so.1«,
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>  needs of »Simple Point Reader" to
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> create. Closing.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> make[1]: ***
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [CMakeFiles/SimplePointsReader.dir/all] Error 2
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> make: *** [all]  Error 2
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> And whats the meaning of this Error .
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> . .
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Wed, Aug 14, 2013 at 1:52 PM, Anka
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Kochanowska <pluszcz at gmail.com>wrote:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hi!
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> We have asked you many times to keep
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> the discussion on vtkusers mailing list. You have to select Replay All when
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> you answer messages posted to the list.This way you have better chances to
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> resolve your problem.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> You have to pass as VTK_DIR the
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> directory containing VTKConfig.cmake. Surely, you are able to find files on
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> your system?
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Look  in the directory where you
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> installed vtk, in lib, vtk-6...
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Anka
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Wed, Aug 14, 2013 at 7:44 AM,
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Altamash Abbasi <
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> altamashabbasi at gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> no i'm not using cmake-gui???
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> can u tell me the appropriate path
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> of VTK_DIR??
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Wed, Aug 14, 2013 at 1:37 PM,
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Anka Kochanowska <pluszcz at gmail.com
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> > wrote:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Exactly what it says - you have to
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> set VTK_DIR when you configure cmake.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Are you using cmake-gui?
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Find the line VTK_DIR  and enter
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> there the path described in the error message.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Anka
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Wed, Aug 14, 2013 at 7:01 AM,
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Altamash Abbasi <
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> altamashabbasi at gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>  CMake Error at
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> /usr/share/cmake/Modules/FindVTK.cmake:135 (MESSAGE):
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>    VTK not found.  Set the
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> VTK_DIR cmake cache entry to the directory
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>    containing VTKConfig.cmake.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>  This is either the root of the build tree, or
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>    PREFIX/lib/vtk for an
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> installation.  For VTK 4.0, this is the location of
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>    UseVTK.cmake.  This is either
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> the root of the build tree or
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>    PREFIX/include/vtk for an
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> installation.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>  Call Stack (most recent call
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> first):
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>    CMakeLists.txt:6 (find_package)
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Whats the meaning of this Error
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ?????
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Powered by www.kitware.com
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Visit other Kitware open-source
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> projects at
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> http://www.kitware.com/opensource/opensource.html
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Please keep messages on-topic and
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> check the VTK FAQ at:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> http://www.vtk.org/Wiki/VTK_FAQ
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Follow this link to
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> subscribe/unsubscribe:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> http://www.vtk.org/mailman/listinfo/vtkusers
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Powered by www.kitware.com
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Visit other Kitware open-source
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> projects at
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> http://www.kitware.com/opensource/opensource.html
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Please keep messages on-topic and
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> check the VTK FAQ at:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> http://www.vtk.org/Wiki/VTK_FAQ
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Follow this link to
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> subscribe/unsubscribe:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> http://www.vtk.org/mailman/listinfo/vtkusers
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Unpaid intern in BillsBasement at
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> noware dot com
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>>>>>>>>>>>>>>> Unpaid intern in BillsBasement at noware dot com
>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>>>>>>>>>>>> Unpaid intern in BillsBasement at noware dot com
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>>
>>>>>
>>>>
>>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.vtk.org/pipermail/vtkusers/attachments/20130814/454df9c6/attachment.htm>

More information about the vtkusers mailing list