[vtkusers] New

Altamash Abbasi altamashabbasi at gmail.com
Wed Aug 14 09:40:26 EDT 2013 

to which path ?? like i've vtk6 in software directory . .. i create a new
director in software directory to build . . .

/home/stame1/software in this directory i'm doing all things . . .


On Wed, Aug 14, 2013 at 3:37 PM, Anka Kochanowska <pluszcz at gmail.com> wrote:

> You do not have to create it, just set CMAKE_INSTALL_PREFIX to the new
> path.
> Do not  build and install in the same directory. As a matter of fact,
> avoiding building in the source directory also.
> Anka
>
>
>
> On Wed, Aug 14, 2013 at 9:34 AM, Altamash Abbasi <altamashabbasi at gmail.com
> > wrote:
>
>> while building i gave the same path  to CMAKE_INSTALL_PREFIX i.e where i
>> build the files . . . should i create a new directory in software folder
>> and give that path to CMAKE_INSTALL_PREFIX ????. . .
>>
>>
>> On Wed, Aug 14, 2013 at 3:28 PM, Anka Kochanowska <pluszcz at gmail.com>wrote:
>>
>>> The path should be something like that:
>>> /opt/vtk-6.0/lib/cmake/vtk-6.0
>>> There is no CMakeFiles directory in the installed directory, either you
>>> did not install or you installed in the wrong directory.
>>> Please give us the absolute path to your build directory   and the
>>> absolute path to your install directory.
>>>
>>> When you configured cmake to build vtk, what did you set as
>>> CMAKE_INSTALL_PREFIX?
>>> If you never set this variable, the default should be /usr/local and
>>> probably you have no permission to install there.
>>>
>>> Maybe try to run cmake again and set CMAKE_INSTALL_PREFIX to  /home/stame1/software/VTK6_installed
>>> (or something other instead of VTK6_installed), then set VTK_DIR to the new
>>> path.
>>>
>>>
>>> Anka
>>>
>>>
>>>
>>> On Wed, Aug 14, 2013 at 9:16 AM, Altamash Abbasi <
>>> altamashabbasi at gmail.com> wrote:
>>>
>>>> there is no VTKConfig.cmake in lib/cmake/vtk6 but there is a file in
>>>> CMakeFiles directory . . . its path is
>>>> /home/stame1/software/VTKBin/CMakeFiles . . .
>>>>
>>>>
>>>> On Wed, Aug 14, 2013 at 3:11 PM, Anka Kochanowska <pluszcz at gmail.com>wrote:
>>>>
>>>>> is there VTKConfig.cmake in lib/cmake/vtk6.0.0?
>>>>>
>>>>> (As I said, I do not use vtk 6, so I do not know well the directory
>>>>> structure)
>>>>>  Anka
>>>>>
>>>>>
>>>>>
>>>>> On Wed, Aug 14, 2013 at 9:09 AM, Altamash Abbasi <
>>>>> altamashabbasi at gmail.com> wrote:
>>>>>
>>>>>> /home/stame1/software/VTKBin . . . this is the installed vtk 6 path .
>>>>>> .. and there is also lib/cmake/vtk6.0.0 directory in it . . .
>>>>>>
>>>>>>
>>>>>> On Wed, Aug 14, 2013 at 3:05 PM, Anka Kochanowska <pluszcz at gmail.com>wrote:
>>>>>>
>>>>>>> What is the installed vtk 6 path? Is there lib/vtk-6.. directory in
>>>>>>> it?
>>>>>>> If not, the installation may not be good.
>>>>>>> Anka
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> On Wed, Aug 14, 2013 at 9:02 AM, Altamash Abbasi <
>>>>>>> altamashabbasi at gmail.com> wrote:
>>>>>>>
>>>>>>>> using "make" and "make install" command ??? i've also done this but
>>>>>>>> still it' jam . . .
>>>>>>>>
>>>>>>>>
>>>>>>>> On Wed, Aug 14, 2013 at 3:00 PM, Anka Kochanowska <
>>>>>>>> pluszcz at gmail.com> wrote:
>>>>>>>>
>>>>>>>>> After compiling vtk, install it, then build your examples using
>>>>>>>>> the path to installation directory
>>>>>>>>>
>>>>>>>>> Anka
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> On Wed, Aug 14, 2013 at 8:57 AM, Altamash Abbasi <
>>>>>>>>> altamashabbasi at gmail.com> wrote:
>>>>>>>>>
>>>>>>>>>> so guys whats the solution of my problem . . . Atleast tell me
>>>>>>>>>> what to do . . .
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> On Wed, Aug 14, 2013 at 2:46 PM, Altamash Abbasi <
>>>>>>>>>> altamashabbasi at gmail.com> wrote:
>>>>>>>>>>
>>>>>>>>>>> I've not installed i've just compiled using this command
>>>>>>>>>>> acctually i'm using LINUX...
>>>>>>>>>>>
>>>>>>>>>>> ccmake ../VTKBin
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> On Wed, Aug 14, 2013 at 2:44 PM, Bill Lorensen <
>>>>>>>>>>> bill.lorensen at gmail.com> wrote:
>>>>>>>>>>>
>>>>>>>>>>>> Who installed the vtk you are using?
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> On Wed, Aug 14, 2013 at 8:44 AM, Altamash Abbasi <
>>>>>>>>>>>> altamashabbasi at gmail.com> wrote:
>>>>>>>>>>>>
>>>>>>>>>>>>> no VTKConfig.cmake is not in that directory . . .
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> On Wed, Aug 14, 2013 at 2:42 PM, Altamash Abbasi <
>>>>>>>>>>>>> altamashabbasi at gmail.com> wrote:
>>>>>>>>>>>>>
>>>>>>>>>>>>>> No bill it's not working . . . Sorry
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> On Wed, Aug 14, 2013 at 2:42 PM, Bill Lorensen <
>>>>>>>>>>>>>> bill.lorensen at gmail.com> wrote:
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Does "Yeah Bill" mean it worked?
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> On Wed, Aug 14, 2013 at 8:40 AM, Altamash Abbasi <
>>>>>>>>>>>>>>> altamashabbasi at gmail.com> wrote:
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Yeah BILL
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> On Wed, Aug 14, 2013 at 2:40 PM, Altamash Abbasi <
>>>>>>>>>>>>>>>> altamashabbasi at gmail.com> wrote:
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> Yeah Anka I ve
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> On Wed, Aug 14, 2013 at 2:39 PM, Altamash Abbasi <
>>>>>>>>>>>>>>>>> altamashabbasi at gmail.com> wrote:
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> /home/stame1/software/ in this path VTK 6 is installed
>>>>>>>>>>>>>>>>>> and /home/stame1/software/VTKBin config file is saved . . .
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> On Wed, Aug 14, 2013 at 2:36 PM, Anka Kochanowska <
>>>>>>>>>>>>>>>>>> pluszcz at gmail.com> wrote:
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> Absolute path is something in the form
>>>>>>>>>>>>>>>>>>> /home/users/c/computerhope/public_html/cgi-bin
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> you have to find the path to the directory where your
>>>>>>>>>>>>>>>>>>> vtk 6 is installed.
>>>>>>>>>>>>>>>>>>> Anka
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> On Wed, Aug 14, 2013 at 8:33 AM, Altamash Abbasi <
>>>>>>>>>>>>>>>>>>> altamashabbasi at gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> it' name is Software
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> On Wed, Aug 14, 2013 at 2:33 PM, Anka Kochanowska <
>>>>>>>>>>>>>>>>>>>> pluszcz at gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> What is the absolute directory path where you
>>>>>>>>>>>>>>>>>>>>> installed vtk 6?
>>>>>>>>>>>>>>>>>>>>> Anka
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> On Wed, Aug 14, 2013 at 8:29 AM, Altamash Abbasi <
>>>>>>>>>>>>>>>>>>>>> altamashabbasi at gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>> it's name is VTKBin . . .
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>> On Wed, Aug 14, 2013 at 2:27 PM, Bill Lorensen <
>>>>>>>>>>>>>>>>>>>>>> bill.lorensen at gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>> What is the name of the directory that contains
>>>>>>>>>>>>>>>>>>>>>>> VTKConfig.cmake?
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>> When you configure using cmake, set the VTK_DIR
>>>>>>>>>>>>>>>>>>>>>>> cmake cache entry to the directory
>>>>>>>>>>>>>>>>>>>>>>>    containing VTKConfig.cmake.
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>> On Wed, Aug 14, 2013 at 8:17 AM, Altamash Abbasi <
>>>>>>>>>>>>>>>>>>>>>>> altamashabbasi at gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>> here is my vtkConfig.cmake file . . . . what should
>>>>>>>>>>>>>>>>>>>>>>>> i do with it . . . that will help me in running the problem
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>> #-----------------------------------------------------------------------------
>>>>>>>>>>>>>>>>>>>>>>>> #
>>>>>>>>>>>>>>>>>>>>>>>> # VTKConfig.cmake - VTK CMake configuration file
>>>>>>>>>>>>>>>>>>>>>>>> for external projects.
>>>>>>>>>>>>>>>>>>>>>>>> #
>>>>>>>>>>>>>>>>>>>>>>>> # This file is configured by VTK and used by the
>>>>>>>>>>>>>>>>>>>>>>>> UseVTK.cmake module
>>>>>>>>>>>>>>>>>>>>>>>> # to load VTK's settings for an external project.
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>> set(VTK_MODULES_DIR
>>>>>>>>>>>>>>>>>>>>>>>> "/home/stame1/software/VTKBin/lib/cmake/vtk-6.0/Modules")
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>> # The C and C++ flags added by VTK to the
>>>>>>>>>>>>>>>>>>>>>>>> cmake-configured flags.
>>>>>>>>>>>>>>>>>>>>>>>> SET(VTK_REQUIRED_C_FLAGS "")
>>>>>>>>>>>>>>>>>>>>>>>> SET(VTK_REQUIRED_CXX_FLAGS " -Wno-deprecated")
>>>>>>>>>>>>>>>>>>>>>>>> SET(VTK_REQUIRED_EXE_LINKER_FLAGS "")
>>>>>>>>>>>>>>>>>>>>>>>> SET(VTK_REQUIRED_SHARED_LINKER_FLAGS "")
>>>>>>>>>>>>>>>>>>>>>>>> SET(VTK_REQUIRED_MODULE_LINKER_FLAGS "")
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>> # The VTK version number
>>>>>>>>>>>>>>>>>>>>>>>> SET(VTK_MAJOR_VERSION "6")
>>>>>>>>>>>>>>>>>>>>>>>> SET(VTK_MINOR_VERSION "0")
>>>>>>>>>>>>>>>>>>>>>>>> SET(VTK_BUILD_VERSION "0")
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>> # The location of the UseVTK.cmake file.
>>>>>>>>>>>>>>>>>>>>>>>> SET(VTK_CMAKE_DIR
>>>>>>>>>>>>>>>>>>>>>>>> "/home/stame1/software/VTK6.0.0/CMake")
>>>>>>>>>>>>>>>>>>>>>>>> SET(VTK_USE_FILE "${VTK_CMAKE_DIR}/UseVTK.cmake")
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>> #-----------------------------------------------------------------------------
>>>>>>>>>>>>>>>>>>>>>>>> # Load requested modules.
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>> # List of available VTK modules.
>>>>>>>>>>>>>>>>>>>>>>>> set(VTK_MODULES_ENABLED)
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>> # Determine list of available VTK-modules by
>>>>>>>>>>>>>>>>>>>>>>>> scanning the VTK_MODULES_DIR.
>>>>>>>>>>>>>>>>>>>>>>>> file(GLOB config_files RELATIVE
>>>>>>>>>>>>>>>>>>>>>>>> "${VTK_MODULES_DIR}" "${VTK_MODULES_DIR}/*.cmake")
>>>>>>>>>>>>>>>>>>>>>>>> foreach (_file ${config_files})
>>>>>>>>>>>>>>>>>>>>>>>>   if (NOT "${_file}" MATCHES
>>>>>>>>>>>>>>>>>>>>>>>> "[^\\-]+-[a-zA-Z]+\\.cmake")
>>>>>>>>>>>>>>>>>>>>>>>>     string(REGEX REPLACE "\\.cmake$" "" _module
>>>>>>>>>>>>>>>>>>>>>>>> "${_file}")
>>>>>>>>>>>>>>>>>>>>>>>>     list(APPEND VTK_MODULES_ENABLED "${_module}")
>>>>>>>>>>>>>>>>>>>>>>>>   endif()
>>>>>>>>>>>>>>>>>>>>>>>> endforeach()
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>> # Import VTK targets.
>>>>>>>>>>>>>>>>>>>>>>>> set(VTK_CONFIG_TARGETS_FILE
>>>>>>>>>>>>>>>>>>>>>>>> "/home/stame1/software/VTKBin/VTKTargets.cmake")
>>>>>>>>>>>>>>>>>>>>>>>> if(NOT TARGET vtkCommonCore)
>>>>>>>>>>>>>>>>>>>>>>>>   include("${VTK_CONFIG_TARGETS_FILE}")
>>>>>>>>>>>>>>>>>>>>>>>> endif()
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>> # Load module interface macros.
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>> include("/home/stame1/software/VTK6.0.0/CMake/vtkModuleAPI.cmake")
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>> # Compute set of requested modules.
>>>>>>>>>>>>>>>>>>>>>>>> if(VTK_FIND_COMPONENTS)
>>>>>>>>>>>>>>>>>>>>>>>>   # Specific modules requested by find_package(VTK).
>>>>>>>>>>>>>>>>>>>>>>>>   set(VTK_MODULES_REQUESTED
>>>>>>>>>>>>>>>>>>>>>>>> "${VTK_FIND_COMPONENTS}")
>>>>>>>>>>>>>>>>>>>>>>>> elseif(NOT "${CMAKE_VERSION}" VERSION_GREATER
>>>>>>>>>>>>>>>>>>>>>>>> 2.8.4.20110407)
>>>>>>>>>>>>>>>>>>>>>>>>   # CMake 2.8.4 and lower do not forward the
>>>>>>>>>>>>>>>>>>>>>>>> components list through
>>>>>>>>>>>>>>>>>>>>>>>>   # their FindVTK.cmake module, so unless the
>>>>>>>>>>>>>>>>>>>>>>>> application called
>>>>>>>>>>>>>>>>>>>>>>>>   #
>>>>>>>>>>>>>>>>>>>>>>>>   #   find_package(VTK NO_MODULE ...)
>>>>>>>>>>>>>>>>>>>>>>>>   #
>>>>>>>>>>>>>>>>>>>>>>>>   # then only the per-component variables
>>>>>>>>>>>>>>>>>>>>>>>> VTK_FIND_REQUIRED_<mod> will
>>>>>>>>>>>>>>>>>>>>>>>>   # have leaked through.
>>>>>>>>>>>>>>>>>>>>>>>>   set(VTK_MODULES_REQUESTED "")
>>>>>>>>>>>>>>>>>>>>>>>>   get_cmake_property(_vars VARIABLES)
>>>>>>>>>>>>>>>>>>>>>>>>   foreach(v IN LISTS _vars)
>>>>>>>>>>>>>>>>>>>>>>>>     if("x${v}" MATCHES "^xVTK_FIND_REQUIRED_" AND
>>>>>>>>>>>>>>>>>>>>>>>> ${v})
>>>>>>>>>>>>>>>>>>>>>>>>       string(REGEX REPLACE "^VTK_FIND_REQUIRED_" ""
>>>>>>>>>>>>>>>>>>>>>>>> _mod "${v}")
>>>>>>>>>>>>>>>>>>>>>>>>       list(APPEND VTK_MODULES_REQUESTED ${_mod})
>>>>>>>>>>>>>>>>>>>>>>>>     endif()
>>>>>>>>>>>>>>>>>>>>>>>>   endforeach()
>>>>>>>>>>>>>>>>>>>>>>>> endif()
>>>>>>>>>>>>>>>>>>>>>>>> if(NOT VTK_MODULES_REQUESTED)
>>>>>>>>>>>>>>>>>>>>>>>>   # No specific modules requested.  Use all of them.
>>>>>>>>>>>>>>>>>>>>>>>>   set(VTK_MODULES_REQUESTED
>>>>>>>>>>>>>>>>>>>>>>>> "${VTK_MODULES_ENABLED}")
>>>>>>>>>>>>>>>>>>>>>>>> endif()
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>> # Load requested modules and their dependencies
>>>>>>>>>>>>>>>>>>>>>>>> into variables:
>>>>>>>>>>>>>>>>>>>>>>>> #  VTK_DEFINITIONS     = Preprocessor definitions
>>>>>>>>>>>>>>>>>>>>>>>> #  VTK_LIBRARIES       = Libraries to link
>>>>>>>>>>>>>>>>>>>>>>>> #  VTK_INCLUDE_DIRS    = Header file search path
>>>>>>>>>>>>>>>>>>>>>>>> #  VTK_LIBRARY_DIRS    = Library search path (for
>>>>>>>>>>>>>>>>>>>>>>>> outside dependencies)
>>>>>>>>>>>>>>>>>>>>>>>> vtk_module_config(VTK ${VTK_MODULES_REQUESTED})
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>> #-----------------------------------------------------------------------------
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>> # VTK global configuration options.
>>>>>>>>>>>>>>>>>>>>>>>> SET(VTK_BUILD_SHARED_LIBS "ON")
>>>>>>>>>>>>>>>>>>>>>>>> SET(VTK_LEGACY_REMOVE "OFF")
>>>>>>>>>>>>>>>>>>>>>>>> SET(VTK_LEGACY_SILENT "OFF")
>>>>>>>>>>>>>>>>>>>>>>>> SET(VTK_WRAP_PYTHON "OFF")
>>>>>>>>>>>>>>>>>>>>>>>> SET(VTK_WRAP_TCL "OFF")
>>>>>>>>>>>>>>>>>>>>>>>> SET(VTK_WRAP_JAVA "OFF")
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>> # Do not add options or information here that is
>>>>>>>>>>>>>>>>>>>>>>>> specific to a
>>>>>>>>>>>>>>>>>>>>>>>> # particular module.  Instead set
>>>>>>>>>>>>>>>>>>>>>>>> <module>_EXPORT_OPTIONS and/or
>>>>>>>>>>>>>>>>>>>>>>>> # <module>_EXPORT_CODE_BUILD and
>>>>>>>>>>>>>>>>>>>>>>>> <module>_EXPORT_CODE_INSTALL
>>>>>>>>>>>>>>>>>>>>>>>> # at the top of the module CMakeLists.txt file.
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>> On Wed, Aug 14, 2013 at 2:08 PM, Altamash Abbasi <
>>>>>>>>>>>>>>>>>>>>>>>> altamashabbasi at gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>> stame1 at itlrstud044:~/software/SimplePointsReader/build>
>>>>>>>>>>>>>>>>>>>>>>>>> make
>>>>>>>>>>>>>>>>>>>>>>>>>  make[2]: *** No rule to make target
>>>>>>>>>>>>>>>>>>>>>>>>> »/home/stame1/software/VTKBin/lib/libvtkfreetype-6.0.so.1«,
>>>>>>>>>>>>>>>>>>>>>>>>>  needs of »Simple Point Reader" to create. Closing.
>>>>>>>>>>>>>>>>>>>>>>>>> make[1]: ***
>>>>>>>>>>>>>>>>>>>>>>>>> [CMakeFiles/SimplePointsReader.dir/all] Error 2
>>>>>>>>>>>>>>>>>>>>>>>>> make: *** [all]  Error 2
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>> And whats the meaning of this Error . . .
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>> On Wed, Aug 14, 2013 at 1:52 PM, Anka Kochanowska
>>>>>>>>>>>>>>>>>>>>>>>>> <pluszcz at gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>> Hi!
>>>>>>>>>>>>>>>>>>>>>>>>>> We have asked you many times to keep the
>>>>>>>>>>>>>>>>>>>>>>>>>> discussion on vtkusers mailing list. You have to select Replay All when you
>>>>>>>>>>>>>>>>>>>>>>>>>> answer messages posted to the list.This way you have better chances to
>>>>>>>>>>>>>>>>>>>>>>>>>> resolve your problem.
>>>>>>>>>>>>>>>>>>>>>>>>>> You have to pass as VTK_DIR the directory
>>>>>>>>>>>>>>>>>>>>>>>>>> containing VTKConfig.cmake. Surely, you are able to find files on your
>>>>>>>>>>>>>>>>>>>>>>>>>> system?
>>>>>>>>>>>>>>>>>>>>>>>>>> Look  in the directory where you installed vtk,
>>>>>>>>>>>>>>>>>>>>>>>>>> in lib, vtk-6...
>>>>>>>>>>>>>>>>>>>>>>>>>> Anka
>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>> On Wed, Aug 14, 2013 at 7:44 AM, Altamash Abbasi
>>>>>>>>>>>>>>>>>>>>>>>>>> <altamashabbasi at gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>> no i'm not using cmake-gui???
>>>>>>>>>>>>>>>>>>>>>>>>>>> can u tell me the appropriate path of VTK_DIR??
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>> On Wed, Aug 14, 2013 at 1:37 PM, Anka
>>>>>>>>>>>>>>>>>>>>>>>>>>> Kochanowska <pluszcz at gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>> Exactly what it says - you have to set VTK_DIR
>>>>>>>>>>>>>>>>>>>>>>>>>>>> when you configure cmake.
>>>>>>>>>>>>>>>>>>>>>>>>>>>> Are you using cmake-gui?
>>>>>>>>>>>>>>>>>>>>>>>>>>>> Find the line VTK_DIR  and enter there the path
>>>>>>>>>>>>>>>>>>>>>>>>>>>> described in the error message.
>>>>>>>>>>>>>>>>>>>>>>>>>>>> Anka
>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Wed, Aug 14, 2013 at 7:01 AM, Altamash
>>>>>>>>>>>>>>>>>>>>>>>>>>>> Abbasi <altamashabbasi at gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>  CMake Error at
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> /usr/share/cmake/Modules/FindVTK.cmake:135 (MESSAGE):
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>    VTK not found.  Set the VTK_DIR cmake cache
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> entry to the directory
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>    containing VTKConfig.cmake.  This is either
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> the root of the build tree, or
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>    PREFIX/lib/vtk for an installation.  For
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> VTK 4.0, this is the location of
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>    UseVTK.cmake.  This is either the root of
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> the build tree or
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>    PREFIX/include/vtk for an installation.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>  Call Stack (most recent call first):
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>    CMakeLists.txt:6 (find_package)
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Whats the meaning of this Error ?????
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Powered by www.kitware.com
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Visit other Kitware open-source projects at
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> http://www.kitware.com/opensource/opensource.html
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Please keep messages on-topic and check the
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> VTK FAQ at: http://www.vtk.org/Wiki/VTK_FAQ
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Follow this link to subscribe/unsubscribe:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> http://www.vtk.org/mailman/listinfo/vtkusers
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>>>>>>>>>>>>> Powered by www.kitware.com
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>> Visit other Kitware open-source projects at
>>>>>>>>>>>>>>>>>>>>>>>> http://www.kitware.com/opensource/opensource.html
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>> Please keep messages on-topic and check the VTK FAQ
>>>>>>>>>>>>>>>>>>>>>>>> at: http://www.vtk.org/Wiki/VTK_FAQ
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>> Follow this link to subscribe/unsubscribe:
>>>>>>>>>>>>>>>>>>>>>>>> http://www.vtk.org/mailman/listinfo/vtkusers
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>>>>>>>>>> Unpaid intern in BillsBasement at noware dot com
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>> Unpaid intern in BillsBasement at noware dot com
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> --
>>>>>>>>>>>> Unpaid intern in BillsBasement at noware dot com
>>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>>
>>>>>
>>>>
>>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.vtk.org/pipermail/vtkusers/attachments/20130814/2384b819/attachment.htm>

More information about the vtkusers mailing list