The path should be something like that:
/opt/vtk-6.0/lib/cmake/vtk-6.0
There is no CMakeFiles directory in the installed directory, either you did
not install or you installed in the wrong directory.
Please give us the absolute path to your build directory and the absolute
path to your install directory.
When you configured cmake to build vtk, what did you set as
CMAKE_INSTALL_PREFIX?
If you never set this variable, the default should be /usr/local and
probably you have no permission to install there.
Maybe try to run cmake again and set CMAKE_INSTALL_PREFIX to
/home/stame1/software/VTK6_installed
(or something other instead of VTK6_installed), then set VTK_DIR to the new
path.
Anka
On Wed, Aug 14, 2013 at 9:16 AM, Altamash Abbasi
<altamashabbasi at gmail.com>wrote:
> there is no VTKConfig.cmake in lib/cmake/vtk6 but there is a file in
> CMakeFiles directory . . . its path is
> /home/stame1/software/VTKBin/CMakeFiles . . .
>
>
> On Wed, Aug 14, 2013 at 3:11 PM, Anka Kochanowska <pluszcz at gmail.com>wrote:
>
>> is there VTKConfig.cmake in lib/cmake/vtk6.0.0?
>>
>> (As I said, I do not use vtk 6, so I do not know well the directory
>> structure)
>> Anka
>>
>>
>>
>> On Wed, Aug 14, 2013 at 9:09 AM, Altamash Abbasi <
>> altamashabbasi at gmail.com> wrote:
>>
>>> /home/stame1/software/VTKBin . . . this is the installed vtk 6 path . ..
>>> and there is also lib/cmake/vtk6.0.0 directory in it . . .
>>>
>>>
>>> On Wed, Aug 14, 2013 at 3:05 PM, Anka Kochanowska <pluszcz at gmail.com>wrote:
>>>
>>>> What is the installed vtk 6 path? Is there lib/vtk-6.. directory in it?
>>>> If not, the installation may not be good.
>>>> Anka
>>>>
>>>>
>>>>
>>>> On Wed, Aug 14, 2013 at 9:02 AM, Altamash Abbasi <
>>>> altamashabbasi at gmail.com> wrote:
>>>>
>>>>> using "make" and "make install" command ??? i've also done this but
>>>>> still it' jam . . .
>>>>>
>>>>>
>>>>> On Wed, Aug 14, 2013 at 3:00 PM, Anka Kochanowska <pluszcz at gmail.com>wrote:
>>>>>
>>>>>> After compiling vtk, install it, then build your examples using the
>>>>>> path to installation directory
>>>>>>
>>>>>> Anka
>>>>>>
>>>>>>
>>>>>>
>>>>>> On Wed, Aug 14, 2013 at 8:57 AM, Altamash Abbasi <
>>>>>> altamashabbasi at gmail.com> wrote:
>>>>>>
>>>>>>> so guys whats the solution of my problem . . . Atleast tell me what
>>>>>>> to do . . .
>>>>>>>
>>>>>>>
>>>>>>> On Wed, Aug 14, 2013 at 2:46 PM, Altamash Abbasi <
>>>>>>> altamashabbasi at gmail.com> wrote:
>>>>>>>
>>>>>>>> I've not installed i've just compiled using this command acctually
>>>>>>>> i'm using LINUX...
>>>>>>>>
>>>>>>>> ccmake ../VTKBin
>>>>>>>>
>>>>>>>>
>>>>>>>> On Wed, Aug 14, 2013 at 2:44 PM, Bill Lorensen <
>>>>>>>> bill.lorensen at gmail.com> wrote:
>>>>>>>>
>>>>>>>>> Who installed the vtk you are using?
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> On Wed, Aug 14, 2013 at 8:44 AM, Altamash Abbasi <
>>>>>>>>> altamashabbasi at gmail.com> wrote:
>>>>>>>>>
>>>>>>>>>> no VTKConfig.cmake is not in that directory . . .
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> On Wed, Aug 14, 2013 at 2:42 PM, Altamash Abbasi <
>>>>>>>>>> altamashabbasi at gmail.com> wrote:
>>>>>>>>>>
>>>>>>>>>>> No bill it's not working . . . Sorry
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> On Wed, Aug 14, 2013 at 2:42 PM, Bill Lorensen <
>>>>>>>>>>> bill.lorensen at gmail.com> wrote:
>>>>>>>>>>>
>>>>>>>>>>>> Does "Yeah Bill" mean it worked?
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> On Wed, Aug 14, 2013 at 8:40 AM, Altamash Abbasi <
>>>>>>>>>>>> altamashabbasi at gmail.com> wrote:
>>>>>>>>>>>>
>>>>>>>>>>>>> Yeah BILL
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> On Wed, Aug 14, 2013 at 2:40 PM, Altamash Abbasi <
>>>>>>>>>>>>> altamashabbasi at gmail.com> wrote:
>>>>>>>>>>>>>
>>>>>>>>>>>>>> Yeah Anka I ve
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> On Wed, Aug 14, 2013 at 2:39 PM, Altamash Abbasi <
>>>>>>>>>>>>>> altamashabbasi at gmail.com> wrote:
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> /home/stame1/software/ in this path VTK 6 is installed and
>>>>>>>>>>>>>>> /home/stame1/software/VTKBin config file is saved . . .
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> On Wed, Aug 14, 2013 at 2:36 PM, Anka Kochanowska <
>>>>>>>>>>>>>>> pluszcz at gmail.com> wrote:
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Absolute path is something in the form
>>>>>>>>>>>>>>>> /home/users/c/computerhope/public_html/cgi-bin
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> you have to find the path to the directory where your vtk 6
>>>>>>>>>>>>>>>> is installed.
>>>>>>>>>>>>>>>> Anka
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> On Wed, Aug 14, 2013 at 8:33 AM, Altamash Abbasi <
>>>>>>>>>>>>>>>> altamashabbasi at gmail.com> wrote:
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> it' name is Software
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> On Wed, Aug 14, 2013 at 2:33 PM, Anka Kochanowska <
>>>>>>>>>>>>>>>>> pluszcz at gmail.com> wrote:
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> What is the absolute directory path where you installed
>>>>>>>>>>>>>>>>>> vtk 6?
>>>>>>>>>>>>>>>>>> Anka
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> On Wed, Aug 14, 2013 at 8:29 AM, Altamash Abbasi <
>>>>>>>>>>>>>>>>>> altamashabbasi at gmail.com> wrote:
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> it's name is VTKBin . . .
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> On Wed, Aug 14, 2013 at 2:27 PM, Bill Lorensen <
>>>>>>>>>>>>>>>>>>> bill.lorensen at gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> What is the name of the directory that contains
>>>>>>>>>>>>>>>>>>>> VTKConfig.cmake?
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> When you configure using cmake, set the VTK_DIR cmake
>>>>>>>>>>>>>>>>>>>> cache entry to the directory
>>>>>>>>>>>>>>>>>>>> containing VTKConfig.cmake.
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> On Wed, Aug 14, 2013 at 8:17 AM, Altamash Abbasi <
>>>>>>>>>>>>>>>>>>>> altamashabbasi at gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> here is my vtkConfig.cmake file . . . . what should i
>>>>>>>>>>>>>>>>>>>>> do with it . . . that will help me in running the problem
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> #-----------------------------------------------------------------------------
>>>>>>>>>>>>>>>>>>>>> #
>>>>>>>>>>>>>>>>>>>>> # VTKConfig.cmake - VTK CMake configuration file for
>>>>>>>>>>>>>>>>>>>>> external projects.
>>>>>>>>>>>>>>>>>>>>> #
>>>>>>>>>>>>>>>>>>>>> # This file is configured by VTK and used by the
>>>>>>>>>>>>>>>>>>>>> UseVTK.cmake module
>>>>>>>>>>>>>>>>>>>>> # to load VTK's settings for an external project.
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> set(VTK_MODULES_DIR
>>>>>>>>>>>>>>>>>>>>> "/home/stame1/software/VTKBin/lib/cmake/vtk-6.0/Modules")
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> # The C and C++ flags added by VTK to the
>>>>>>>>>>>>>>>>>>>>> cmake-configured flags.
>>>>>>>>>>>>>>>>>>>>> SET(VTK_REQUIRED_C_FLAGS "")
>>>>>>>>>>>>>>>>>>>>> SET(VTK_REQUIRED_CXX_FLAGS " -Wno-deprecated")
>>>>>>>>>>>>>>>>>>>>> SET(VTK_REQUIRED_EXE_LINKER_FLAGS "")
>>>>>>>>>>>>>>>>>>>>> SET(VTK_REQUIRED_SHARED_LINKER_FLAGS "")
>>>>>>>>>>>>>>>>>>>>> SET(VTK_REQUIRED_MODULE_LINKER_FLAGS "")
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> # The VTK version number
>>>>>>>>>>>>>>>>>>>>> SET(VTK_MAJOR_VERSION "6")
>>>>>>>>>>>>>>>>>>>>> SET(VTK_MINOR_VERSION "0")
>>>>>>>>>>>>>>>>>>>>> SET(VTK_BUILD_VERSION "0")
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> # The location of the UseVTK.cmake file.
>>>>>>>>>>>>>>>>>>>>> SET(VTK_CMAKE_DIR
>>>>>>>>>>>>>>>>>>>>> "/home/stame1/software/VTK6.0.0/CMake")
>>>>>>>>>>>>>>>>>>>>> SET(VTK_USE_FILE "${VTK_CMAKE_DIR}/UseVTK.cmake")
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> #-----------------------------------------------------------------------------
>>>>>>>>>>>>>>>>>>>>> # Load requested modules.
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> # List of available VTK modules.
>>>>>>>>>>>>>>>>>>>>> set(VTK_MODULES_ENABLED)
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> # Determine list of available VTK-modules by scanning
>>>>>>>>>>>>>>>>>>>>> the VTK_MODULES_DIR.
>>>>>>>>>>>>>>>>>>>>> file(GLOB config_files RELATIVE "${VTK_MODULES_DIR}"
>>>>>>>>>>>>>>>>>>>>> "${VTK_MODULES_DIR}/*.cmake")
>>>>>>>>>>>>>>>>>>>>> foreach (_file ${config_files})
>>>>>>>>>>>>>>>>>>>>> if (NOT "${_file}" MATCHES
>>>>>>>>>>>>>>>>>>>>> "[^\\-]+-[a-zA-Z]+\\.cmake")
>>>>>>>>>>>>>>>>>>>>> string(REGEX REPLACE "\\.cmake$" "" _module
>>>>>>>>>>>>>>>>>>>>> "${_file}")
>>>>>>>>>>>>>>>>>>>>> list(APPEND VTK_MODULES_ENABLED "${_module}")
>>>>>>>>>>>>>>>>>>>>> endif()
>>>>>>>>>>>>>>>>>>>>> endforeach()
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> # Import VTK targets.
>>>>>>>>>>>>>>>>>>>>> set(VTK_CONFIG_TARGETS_FILE
>>>>>>>>>>>>>>>>>>>>> "/home/stame1/software/VTKBin/VTKTargets.cmake")
>>>>>>>>>>>>>>>>>>>>> if(NOT TARGET vtkCommonCore)
>>>>>>>>>>>>>>>>>>>>> include("${VTK_CONFIG_TARGETS_FILE}")
>>>>>>>>>>>>>>>>>>>>> endif()
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> # Load module interface macros.
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> include("/home/stame1/software/VTK6.0.0/CMake/vtkModuleAPI.cmake")
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> # Compute set of requested modules.
>>>>>>>>>>>>>>>>>>>>> if(VTK_FIND_COMPONENTS)
>>>>>>>>>>>>>>>>>>>>> # Specific modules requested by find_package(VTK).
>>>>>>>>>>>>>>>>>>>>> set(VTK_MODULES_REQUESTED "${VTK_FIND_COMPONENTS}")
>>>>>>>>>>>>>>>>>>>>> elseif(NOT "${CMAKE_VERSION}" VERSION_GREATER
>>>>>>>>>>>>>>>>>>>>> 2.8.4.20110407)
>>>>>>>>>>>>>>>>>>>>> # CMake 2.8.4 and lower do not forward the
>>>>>>>>>>>>>>>>>>>>> components list through
>>>>>>>>>>>>>>>>>>>>> # their FindVTK.cmake module, so unless the
>>>>>>>>>>>>>>>>>>>>> application called
>>>>>>>>>>>>>>>>>>>>> #
>>>>>>>>>>>>>>>>>>>>> # find_package(VTK NO_MODULE ...)
>>>>>>>>>>>>>>>>>>>>> #
>>>>>>>>>>>>>>>>>>>>> # then only the per-component variables
>>>>>>>>>>>>>>>>>>>>> VTK_FIND_REQUIRED_<mod> will
>>>>>>>>>>>>>>>>>>>>> # have leaked through.
>>>>>>>>>>>>>>>>>>>>> set(VTK_MODULES_REQUESTED "")
>>>>>>>>>>>>>>>>>>>>> get_cmake_property(_vars VARIABLES)
>>>>>>>>>>>>>>>>>>>>> foreach(v IN LISTS _vars)
>>>>>>>>>>>>>>>>>>>>> if("x${v}" MATCHES "^xVTK_FIND_REQUIRED_" AND ${v})
>>>>>>>>>>>>>>>>>>>>> string(REGEX REPLACE "^VTK_FIND_REQUIRED_" ""
>>>>>>>>>>>>>>>>>>>>> _mod "${v}")
>>>>>>>>>>>>>>>>>>>>> list(APPEND VTK_MODULES_REQUESTED ${_mod})
>>>>>>>>>>>>>>>>>>>>> endif()
>>>>>>>>>>>>>>>>>>>>> endforeach()
>>>>>>>>>>>>>>>>>>>>> endif()
>>>>>>>>>>>>>>>>>>>>> if(NOT VTK_MODULES_REQUESTED)
>>>>>>>>>>>>>>>>>>>>> # No specific modules requested. Use all of them.
>>>>>>>>>>>>>>>>>>>>> set(VTK_MODULES_REQUESTED "${VTK_MODULES_ENABLED}")
>>>>>>>>>>>>>>>>>>>>> endif()
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> # Load requested modules and their dependencies into
>>>>>>>>>>>>>>>>>>>>> variables:
>>>>>>>>>>>>>>>>>>>>> # VTK_DEFINITIONS = Preprocessor definitions
>>>>>>>>>>>>>>>>>>>>> # VTK_LIBRARIES = Libraries to link
>>>>>>>>>>>>>>>>>>>>> # VTK_INCLUDE_DIRS = Header file search path
>>>>>>>>>>>>>>>>>>>>> # VTK_LIBRARY_DIRS = Library search path (for
>>>>>>>>>>>>>>>>>>>>> outside dependencies)
>>>>>>>>>>>>>>>>>>>>> vtk_module_config(VTK ${VTK_MODULES_REQUESTED})
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> #-----------------------------------------------------------------------------
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> # VTK global configuration options.
>>>>>>>>>>>>>>>>>>>>> SET(VTK_BUILD_SHARED_LIBS "ON")
>>>>>>>>>>>>>>>>>>>>> SET(VTK_LEGACY_REMOVE "OFF")
>>>>>>>>>>>>>>>>>>>>> SET(VTK_LEGACY_SILENT "OFF")
>>>>>>>>>>>>>>>>>>>>> SET(VTK_WRAP_PYTHON "OFF")
>>>>>>>>>>>>>>>>>>>>> SET(VTK_WRAP_TCL "OFF")
>>>>>>>>>>>>>>>>>>>>> SET(VTK_WRAP_JAVA "OFF")
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> # Do not add options or information here that is
>>>>>>>>>>>>>>>>>>>>> specific to a
>>>>>>>>>>>>>>>>>>>>> # particular module. Instead set
>>>>>>>>>>>>>>>>>>>>> <module>_EXPORT_OPTIONS and/or
>>>>>>>>>>>>>>>>>>>>> # <module>_EXPORT_CODE_BUILD and
>>>>>>>>>>>>>>>>>>>>> <module>_EXPORT_CODE_INSTALL
>>>>>>>>>>>>>>>>>>>>> # at the top of the module CMakeLists.txt file.
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> On Wed, Aug 14, 2013 at 2:08 PM, Altamash Abbasi <
>>>>>>>>>>>>>>>>>>>>> altamashabbasi at gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>> stame1 at itlrstud044:~/software/SimplePointsReader/build>
>>>>>>>>>>>>>>>>>>>>>> make
>>>>>>>>>>>>>>>>>>>>>> make[2]: *** No rule to make target
>>>>>>>>>>>>>>>>>>>>>> »/home/stame1/software/VTKBin/lib/libvtkfreetype-6.0.so.1«,
>>>>>>>>>>>>>>>>>>>>>> needs of »Simple Point Reader" to create. Closing.
>>>>>>>>>>>>>>>>>>>>>> make[1]: *** [CMakeFiles/SimplePointsReader.dir/all]
>>>>>>>>>>>>>>>>>>>>>> Error 2
>>>>>>>>>>>>>>>>>>>>>> make: *** [all] Error 2
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>> And whats the meaning of this Error . . .
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>> On Wed, Aug 14, 2013 at 1:52 PM, Anka Kochanowska <
>>>>>>>>>>>>>>>>>>>>>> pluszcz at gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>> Hi!
>>>>>>>>>>>>>>>>>>>>>>> We have asked you many times to keep the discussion
>>>>>>>>>>>>>>>>>>>>>>> on vtkusers mailing list. You have to select Replay All when you answer
>>>>>>>>>>>>>>>>>>>>>>> messages posted to the list.This way you have better chances to resolve
>>>>>>>>>>>>>>>>>>>>>>> your problem.
>>>>>>>>>>>>>>>>>>>>>>> You have to pass as VTK_DIR the directory containing
>>>>>>>>>>>>>>>>>>>>>>> VTKConfig.cmake. Surely, you are able to find files on your system?
>>>>>>>>>>>>>>>>>>>>>>> Look in the directory where you installed vtk, in
>>>>>>>>>>>>>>>>>>>>>>> lib, vtk-6...
>>>>>>>>>>>>>>>>>>>>>>> Anka
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>> On Wed, Aug 14, 2013 at 7:44 AM, Altamash Abbasi <
>>>>>>>>>>>>>>>>>>>>>>> altamashabbasi at gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>> no i'm not using cmake-gui???
>>>>>>>>>>>>>>>>>>>>>>>> can u tell me the appropriate path of VTK_DIR??
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>> On Wed, Aug 14, 2013 at 1:37 PM, Anka Kochanowska <
>>>>>>>>>>>>>>>>>>>>>>>> pluszcz at gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>> Exactly what it says - you have to set VTK_DIR
>>>>>>>>>>>>>>>>>>>>>>>>> when you configure cmake.
>>>>>>>>>>>>>>>>>>>>>>>>> Are you using cmake-gui?
>>>>>>>>>>>>>>>>>>>>>>>>> Find the line VTK_DIR and enter there the path
>>>>>>>>>>>>>>>>>>>>>>>>> described in the error message.
>>>>>>>>>>>>>>>>>>>>>>>>> Anka
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>> On Wed, Aug 14, 2013 at 7:01 AM, Altamash Abbasi <
>>>>>>>>>>>>>>>>>>>>>>>>> altamashabbasi at gmail.com> wrote:
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>> CMake Error at
>>>>>>>>>>>>>>>>>>>>>>>>>> /usr/share/cmake/Modules/FindVTK.cmake:135 (MESSAGE):
>>>>>>>>>>>>>>>>>>>>>>>>>> VTK not found. Set the VTK_DIR cmake cache
>>>>>>>>>>>>>>>>>>>>>>>>>> entry to the directory
>>>>>>>>>>>>>>>>>>>>>>>>>> containing VTKConfig.cmake. This is either
>>>>>>>>>>>>>>>>>>>>>>>>>> the root of the build tree, or
>>>>>>>>>>>>>>>>>>>>>>>>>> PREFIX/lib/vtk for an installation. For VTK
>>>>>>>>>>>>>>>>>>>>>>>>>> 4.0, this is the location of
>>>>>>>>>>>>>>>>>>>>>>>>>> UseVTK.cmake. This is either the root of the
>>>>>>>>>>>>>>>>>>>>>>>>>> build tree or
>>>>>>>>>>>>>>>>>>>>>>>>>> PREFIX/include/vtk for an installation.
>>>>>>>>>>>>>>>>>>>>>>>>>> Call Stack (most recent call first):
>>>>>>>>>>>>>>>>>>>>>>>>>> CMakeLists.txt:6 (find_package)
>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>> Whats the meaning of this Error ?????
>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>>>>>>>>>>>>>>> Powered by www.kitware.com
>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>> Visit other Kitware open-source projects at
>>>>>>>>>>>>>>>>>>>>>>>>>> http://www.kitware.com/opensource/opensource.html
>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>> Please keep messages on-topic and check the VTK
>>>>>>>>>>>>>>>>>>>>>>>>>> FAQ at: http://www.vtk.org/Wiki/VTK_FAQ
>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>> Follow this link to subscribe/unsubscribe:
>>>>>>>>>>>>>>>>>>>>>>>>>> http://www.vtk.org/mailman/listinfo/vtkusers
>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>>>>>>>>>> Powered by www.kitware.com
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> Visit other Kitware open-source projects at
>>>>>>>>>>>>>>>>>>>>> http://www.kitware.com/opensource/opensource.html
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> Please keep messages on-topic and check the VTK FAQ
>>>>>>>>>>>>>>>>>>>>> at: http://www.vtk.org/Wiki/VTK_FAQ
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> Follow this link to subscribe/unsubscribe:
>>>>>>>>>>>>>>>>>>>>> http://www.vtk.org/mailman/listinfo/vtkusers
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>>>>>>> Unpaid intern in BillsBasement at noware dot com
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> --
>>>>>>>>>>>> Unpaid intern in BillsBasement at noware dot com
>>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> --
>>>>>>>>> Unpaid intern in BillsBasement at noware dot com
>>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>>
>>>>>
>>>>
>>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.vtk.org/pipermail/vtkusers/attachments/20130814/101610a8/attachment.htm>