[vtkusers] [ParaViewWeb] compile problem with class vtkJPEGWriter and function SetInput

Sebastien Jourdain sebastien.jourdain at kitware.com
Wed Apr 18 12:52:30 EDT 2012 

How did you installed tomcat ?

Seb

On Wed, Apr 18, 2012 at 11:59 AM, Tuan Ha Tran
<tuan-ha.tran at insa-lyon.fr> wrote:
> So the result is "No", always the same error.
> Yes, another information : I didn't find any file named
>              /etc/init.d/tomcat6,
>              /var/lib/tomcat6/conf/policy.d/03catalina.policy,
>              /var/lib/tomcat6/conf/policy.d/04webapps.policy
> so I went to conf folder in my apache-tomcat-7.0.26 and added all in
> "catalina.policy"
>
>
>
> ----- Original Message -----
> From: Tuan Ha Tran <tuan-ha.tran at insa-lyon.fr>
> To: Sebastien Jourdain <sebastien.jourdain at kitware.com>
> Cc: vtkusers at vtk.org, Frederic Cervenansky
> <frederic.cervenansky at creatis.insa-lyon.fr>
> Sent: Wed, 18 Apr 2012 17:53:48 +0200 (CEST)
> Subject: Re: [vtkusers] [ParaViewWeb] compile problem with class
> vtkJPEGWriter and function SetInput
>
> Thank you for your reponse.
> As I said, I followed the tutorial in the
> "http://www.paraview.org/Wiki/ParaViewWeb_with_system_tomcat_package"
>
> cd ..
> chown -R tomcat6 paraviewweb-work
> chgrp -R tomcat6 paraviewweb-work
>
>
> And, the right is set to tomcat (because there is an error "no user named
> tomcat6") (I don't know if we can use root)
> However, I will try with root and we'll see.
> Thank again Seb
>
>
> ----- Original Message -----
> From: Sebastien Jourdain <sebastien.jourdain at kitware.com>
> To: Tuan Ha Tran <tuan-ha.tran at insa-lyon.fr>
> Cc: vtkusers at vtk.org, Frederic Cervenansky
> <frederic.cervenansky at creatis.insa-lyon.fr>
> Sent: Wed, 18 Apr 2012 17:31:51 +0200 (CEST)
> Subject: Re: [vtkusers] [ParaViewWeb] compile problem with class
> vtkJPEGWriter and function SetInput
>
> Hi Tuan,
>
> Those your local tomcat that run under your user has the right to
> write in that directory ?
>
> /var/lib/tomcat6/paraviewweb-work/ ?
>
> Seb
>
> On Wed, Apr 18, 2012 at 11:10 AM, Tuan Ha Tran
> wrote:
>> Hi Seb,
>>     I have another thing to ask you (I'm sorry if this question is already
>> asked, but I found my problem different)
>>     I use super build to build ParaViewWeb with all the settings by
>> default.
>> It's done.
>>
>>     Next :
>>     - I downloaded the apache-tomcat-7.0.26
>>     - Copied all the *.war generated by the SuperBuild into tomcat7.0.26's
>> webapps folder
>>     - Copied pw-config.properties into apache-tomcat-7.0.26/lib
>>
>>     To run PWApps,
>>     - I started JMS broker d4apache Activemq, the latest version is 5.5.1
>> (./activemq-admin start)
>>     - I started server Tomcat (./catalina.sh start)
>>
>>     Result: when I tried to open a session in PWApps @
>> http://localhost:8080/PWApp/
>>     the error appeared : An error occured during the loading.
>> org.hibernate.exception.GenericJDBCException: Cannot open connection
>>
>>
>>     It's absolutely a problem with hibernate, the connection with the
>> database. But I don't quite understand how to fix this.
>>     Do we have to modify pw-config.properties? What do we have to do?
>>
>>     About the working directory, I followed the tutorial @
>> http://www.paraview.org/Wiki/ParaViewWeb_with_system_tomcat_package.
>>     Thank you for your help.
>>
>>
>> ********************************************************************
>> ***************** pw-config.properties **********************************
>> ********************************************************************
>>
>> # Directory used to store application files
>> pw.working.directory=/var/lib/tomcat6/paraviewweb-work/
>>
>> # Logging level that should be used [DEBUG, INFO, WARNING, ERROR,
>> CRITICAL]
>> pw.logging.level=ERROR
>>
>> # Do we enable logging [on, off, yes, no]
>> paraview.logging=OFF
>> pw.logging=ON
>>
>> # Inactivity timeout for garbage collecting PWServer applications
>> # time is given in minute
>> pw.garbage.collector.timeout=5
>>
>> # Administration page user credentials
>> pw.admin.login=admin
>> pw.admin.password=admin
>>
>> # Total number of resources available
>> pw.max.resources=5
>>
>> # PWServer executable path settings
>>
>> pw.executable.path.default=/var/lib/tomcat6/paraviewweb-work/bin/PWServer.sh
>> #
>>
>> pw.executable.path.parallel=/home/thtran/projects/ParaViewWeb/install-pw/bin/PWServer
>> # pw.executable.path.manta=/home/seb/tmp/ParaWeb-work/exec/manta.sh
>>
>> # pvserver executable path settings
>> # pvserver.executable.path.demo=/home/seb/tmp/ParaWeb-work/exec/demo.sh
>>
>> # Plugin directory settings
>> pw.plugins.default=/var/lib/tomcat6/paraviewweb-work/plugins
>> # pw.plugins.parallel=/usr/local/PVW/PWSer_WD/plugins
>> # pw.plugins.manta=/usr/local/PVW/PWSer_WD/plugins
>>
>> # Resource consumption definition
>> pw.resource.consumption.default=1
>> # pw.resource.consumption.parallel=4
>> # pw.resource.consumption.manta=2
>>
>> # Optional thirdpart properties
>> pw.gwt-app.data=/var/lib/tomcat6/paraviewweb-work/data
>> pw.gwt-app.states=/var/lib/tomcat6/paraviewweb-work/states
>> # pw.gwt-app.webgl=/usr/local/PVW/PWSer_WD/webgl
>> pw.gwt-app.confs=default
>> # Optional PWApp upload properties
>> # - size in MegaBytes
>> # - timeout in minute
>> # - types provides the set of extension allowed
>> pw.gwt-app.upload.size=10
>> pw.gwt-app.upload.timeout=2
>> pw.gwt-app.upload.types=vtp:vtk
>>
>> # Remote server command line
>> #  * Tomcat will call any script in the following directory and will
>> execute
>> the
>> #    following command line where portnumber is an available portnumber:
>> #       > fullScriptPath username password
>> #  * Documentation on How to start a pvserver
>> #    - http://www.cmake.org/Wiki/Setting_up_a_ParaView_Server
>> # pw.remote.settings=/usr/local/PVW/PWSer_WD/remote-settings
>>
>> pw.remote.log.dir=/var/lib/tomcat6/paraviewweb-work/logs
>>
>> # Optional PWStateApp working directory
>>
>> pw.state.working.directory=/var/lib/tomcat6/paraviewweb-work/states-workdir
>>
>> ***********************************************************
>> ************ end of pw-config.properties*************************
>> ***********************************************************
>>
>>
>> ----- Original Message -----
>> From: Sebastien Jourdain
>> To: Tuan Ha Tran
>> Cc: vtkusers at vtk.org
>> Sent: Fri, 06 Apr 2012 19:33:40 +0200 (CEST)
>> Subject: Re: [vtkusers] [ParaViewWeb] compile problem with class
>> vtkJPEGWriter and function SetInput
>>
>> You should use ParaView 3.14.
>>
>> I'm sure you are doing something wrong that I'm not aware of, because
>> I'm using ParaViewWeb with ParaView 3.14 myself. So if I managed to
>> build it, you should too, unless we are doing something different.
>>
>> What did you do with the SuperBuild ? Did it manage to fetch ParaView
>> and ParaViewWeb and start building those as well as their dependency
>> like apr ?
>>
>> Seb
>>
>> On Fri, Apr 6, 2012 at 11:04 AM, Tuan Ha Tran wrote:
>>> Hi,
>>>  I tried your solution with SuperBuild but the problem still exist.
>>>  I wonder if I should reuse ParaView 3.10.1?
>>>
>>>  Thank you Seb
>>>
>>> ----- Original Message -----
>>> From: "Sebastien Jourdain"
>>> To: "Tuan Ha Tran"
>>> Cc: vtkusers at vtk.org
>>> Sent: Friday, April 6, 2012 4:53:43 PM
>>> Subject: Re: [vtkusers] [ParaViewWeb] compile problem with class
>>> vtkJPEGWriter and function SetInput
>>>
>>> Hi Tuan Ha Tran,
>>>
>>> The documentation was written when ParaView 3.10 was out and that
>>> version was lacking some fixed that were on git/master at that time
>>> but I should definitely update the documentation to recommend to use
>>> ParaView 3.14 and not git/master.
>>> In fact, two weeks ago the latest changes in VTK that breaks its
>>> backward compatibility went into ParaView and for which I didn't get
>>> the time to update ParaViewWeb.
>>>
>>> Regarding your ParaView build issue, I'm wondering what you did... But
>>> anyway, if you want to ease the build process, you should definitely
>>> try to use the SuperBuild package so every third party get
>>> automatically compiled for you with the correct arguments and options.
>>>
>>> http://www.paraview.org/Wiki/ParaViewWeb_SuperBuild
>>>
>>> Seb
>>>
>>> On Fri, Apr 6, 2012 at 9:25 AM, Tuan Ha Tran wrote:
>>>> Seb,
>>>> Thank you for your reply. I just followed the instructions in the
>>>> ParaViewWeb site.
>>>> - Mkdir ParaViewWeb
>>>> - Clone git from it address
>>>>
>>>> I used the Ccmake command (in build-pw) for the source in the
>>>> ParaViewWeb
>>>> directory (build-pw is a sub-directory of ParaViewWeb). I compiled and
>>>> then
>>>> the errors.
>>>> I used the latest release (3.14) of ParaView.
>>>>
>>>> there was a problem with ParaView, it is the problem of share library.
>>>> but I resolved this by adding -fPIC in the CFLAGS and CXXFLAGS, I don't
>>>> know
>>>> if that is the problem.
>>>>
>>>> so, the vtkJPEGWriter is in the ParaView folder?
>>>>
>>>> Thank you once more.
>>>>
>>>> ----- Original Message -----
>>>> From: "Sebastien Jourdain"
>>>> To: "Tuan Ha Tran"
>>>> Cc: vtkusers at vtk.org
>>>> Sent: Friday, April 6, 2012 3:11:17 PM
>>>> Subject: Re: [vtkusers] [ParaViewWeb] compile problem with class
>>>> vtkJPEGWriter and function SetInput
>>>>
>>>> Hi Tuan Ha Tran,
>>>>
>>>> how did you build ParaViewWeb ? Did you do from the super build or
>>>> from the main repository ?
>>>> ParaViewWeb basically rely on ParaView that embed VTK which embed that
>>>> vtkJPEGWriter.cxx
>>>> Which version of ParaView did you used ? The latest release (3.14) is
>>>> known to work...
>>>>
>>>> Seb
>>>>
>>>>
>>>> On Fri, Apr 6, 2012 at 5:12 AM, Tuan Ha Tran wrote:
>>>>> Hi everybody,
>>>>>   I have a problem when trying to compile ParaViewWeb
>>>>>   This is the detail of my problem
>>>>>
>>>>> ***********************************************************************
>>>>> %] Built target ParaWebPlugin
>>>>> Scanning dependencies of target PWServer
>>>>> [ 30%] Building CXX object
>>>>> ParaViewAdapter/CMakeFiles/PWServer.dir/vtkPWProcessingEngine.cxx.o
>>>>>
>>>>>
>>>>> /home/thtran/projects/ParaViewWeb/ParaViewAdapter/vtkPWProcessingEngine.cxx:
>>>>> In member function ‘double
>>>>> vtkPWProcessingEngine::ProcessAndSendImage(const
>>>>> char*, vtkImageData*)’:
>>>>>
>>>>>
>>>>> /home/thtran/projects/ParaViewWeb/ParaViewAdapter/vtkPWProcessingEngine.cxx:439:19:
>>>>> error: ‘class vtkJPEGWriter’ has no member named ‘SetInput’
>>>>>
>>>>>
>>>>> /home/thtran/projects/ParaViewWeb/ParaViewAdapter/vtkPWProcessingEngine.cxx:448:18:
>>>>> error: ‘class vtkPNGWriter’ has no member named ‘SetInput’
>>>>> make[2]: ***
>>>>> [ParaViewAdapter/CMakeFiles/PWServer.dir/vtkPWProcessingEngine.cxx.o]
>>>>> Error
>>>>> 1
>>>>> make[1]: *** [ParaViewAdapter/CMakeFiles/PWServer.dir/all] Error 2
>>>>> make: *** [all] Error 2
>>>>>
>>>>>
>>>>> *************************************************************************
>>>>>
>>>>> When I went to the "wtkPWProcesingEngine.cxx", I found out that
>>>>> wtkJPEGWriter is included by #include vtkJPEGWriter.h". But I couldn't
>>>>> find
>>>>> wtkJPEGWriter.h neither vtkJPEGWriter.cxx.
>>>>>
>>>>> When I tried to look for vtkJPEGWriter.cxx by Google, I found this file
>>>>> but I couldn't find any function "SetInput".
>>>>>
>>>>> When I tried to deactivate the line where SetInput is located,
>>>>> ParaViewWeb compile, but I think there are some problems with it.
>>>>>
>>>>> I want to know if someone has the same problem? How to fix that?
>>>>> Thank you all.
>>>>>
>>>>> Ha
>>>>>
>>>>>
>>>>>
>>>>> _______________________________________________
>>>>> Powered by www.kitware.com
>>>>>
>>>>> Visit other Kitware open-source projects at
>>>>> http://www.kitware.com/opensource/opensource.html
>>>>>
>>>>> Please keep messages on-topic and check the VTK FAQ at:
>>>>> http://www.vtk.org/Wiki/VTK_FAQ
>>>>>
>>>>> Follow this link to subscribe/unsubscribe:
>>>>> http://www.vtk.org/mailman/listinfo/vtkusers
>>
>

More information about the vtkusers mailing list