[vtkusers] Splitting vtkImageData in vtkImageData (for each stack image)

Thu Oct 1 03:52:02 EDT 2009

Hi,

vtkImageReslice and vtkImageAppend are what you want to use:
- vtkImageReslice will allow you to get a specific image slice as
vtkImageData. Just do what you want with (transformation) and memorize it
- vtkImageAppend will be able to 'glue' each memorized transformed image.

HTH,
Jérôme

2009/10/1 Natalia Díaz Rodríguez <nataluxy888 at hotmail.com>

>
> Hello!
> I would like to know if there is a way to split or decompose a stack of
> images contained in vtkImageData in more vtkImageData (one per stack image)
> in order to apply different transformations to each of those and put them
> all the images together again afterwards as a single vtkImageData.
>
> ********
> Natalia Díaz Rodríguez
> Åbo Akademi University, Turku, Finland
> Universidad de Granada, Spain
> E-mail: diaz.rodriguez.natalia at gmail.com
>
>
>
>
>
> > From: vtkusers-request at vtk.org
> > Subject: vtkusers Digest, Vol 65, Issue 33
> > To: vtkusers at vtk.org
> > Date: Wed, 30 Sep 2009 12:00:17 -0400
> >
> > Send vtkusers mailing list submissions to
> > vtkusers at vtk.org
> >
> > To subscribe or unsubscribe via the World Wide Web, visit
> > http://www.vtk.org/mailman/listinfo/vtkusers
> > or, via email, send a message with subject or body 'help' to
> > vtkusers-request at vtk.org
> >
> > You can reach the person managing the list at
> > vtkusers-owner at vtk.org
> >
> > When replying, please edit your Subject line so it is more specific
> > than "Re: Contents of vtkusers digest..."
> >
> >
> > Today's Topics:
> >
> > 1. vtkUnstructuredGridVolumeRayCastMapper (05B22CB8): Can't use
> > the ray cast mapper without scalars! (Ali Habib)
> > 2. vtk equivalent for ParaView's Tetraheralize filter?
> > (Eric Mark (CISD/CIV))
> > 3. Re: Using vtkLookupTable (John Durkin)
> > 4. Re: vtk equivalent for ParaView's Tetraheralize filter?
> > (David Thompson)
> > 5. Re: vtk equivalent for ParaView's Tetraheralize filter?
> > (UNCLASSIFIED) (Mark, Eric (Civ, ARL/CISD))
> > 6. VTK in Python -how? (Helvin Lui)
> > 7. Re: QVTKRenderWindowInteractor crashes under Mac OS X 10.6 +
> > CMake x86_64 issue (Piotr Byzia)
> > 8. Re: VTK in Python -how? (Charl Botha)
> > 9. How to read this! (Arsham Mesbah)
> > 10. Anyone knows how to calculate a specific point on a poly
> > surface? (Dajiang Zhu)
> > 11. Re: QVTKRenderWindowInteractor crashes under Mac OS X 10.6 +
> > CMake x86_64 issue (Sean McBride)
> >
> >
> > ----------------------------------------------------------------------
> >
> > Message: 1
> > Date: Tue, 29 Sep 2009 21:47:35 +0200
> > From: Ali Habib <ali.mahmoud.habib at gmail.com>
> > Subject: [vtkusers] vtkUnstructuredGridVolumeRayCastMapper (05B22CB8):
> > Can't use the ray cast mapper without scalars!
> > To: vtkusers at vtk.org
> > Message-ID:
> > <a065f39a0909291247s69399dd9ydef2241ab0800904 at mail.gmail.com>
> > Content-Type: text/plain; charset="iso-8859-1"
> >
> > I wrote a code to make tetrahedral mesh on sphere , but it no give result
> > except :
> >
> > ERROR: In
> >
> m:\dev\cur\vtkdotnet\branch\50\VolumeRendering\vtkUnstructuredGridVolumeRayCastMapper.cxx,
> > line 274
> > vtkUnstructuredGridVolumeRayCastMapper (05B22CB8): Can't use the ray cast
> > mapper without scalars!
> >
> > every time I run the code
> >
> > attached is the c++ code , your fast reply is highly appretiated
> >
> >
> > best regards
> > -------------- next part --------------
> > An HTML attachment was scrubbed...
> > URL: <
> http://www.vtk.org/pipermail/vtkusers/attachments/20090929/99a427a8/attachment-0001.htm
> >
> > -------------- next part --------------
> > A non-text attachment was scrubbed...
> > Name: C++SourceCode.h
> > Type: application/octet-stream
> > Size: 3081 bytes
> > Desc: not available
> > URL: <
> http://www.vtk.org/pipermail/vtkusers/attachments/20090929/99a427a8/attachment-0001.obj
> >
> >
> > ------------------------------
> >
> > Message: 2
> > Date: Tue, 29 Sep 2009 15:50:27 -0400
> > From: "Eric Mark (CISD/CIV)" <emark at arl.army.mil>
> > Subject: [vtkusers] vtk equivalent for ParaView's Tetraheralize
> > filter?
> > To: vtkusers at vtk.org
> > Message-ID: <4AC26503.6000803 at arl.army.mil>
> > Content-Type: text/plain; charset=ISO-8859-1; format=flowed
> >
> > Hello All,
> >
> > I'm attempting to convert an unstructured grid to a tetrahedral mesh and
> > have been trying to use the Delauney3D filter but the results are not
> > what I expected. I've tried adjusting the Tolerance and Offset
> > parameters but it still seems to be connecting points that it shouldn't.
> >
> > If I read the dataset into ParaView and use the Tetrahedralize filter it
> > seems to give me exactly what I want. Is there an equivalent filter or
> > combination of filters in vtk that I can use? I've looked through the
> > class list but I don't see anything that appears to operate on the whole
> > dataset and generate tets. Does anyone know of an equivalent?
> >
> > Thanks,
> >
> > Eric
> >
> >
> > ------------------------------
> >
> > Message: 3
> > Date: Tue, 29 Sep 2009 15:56:29 -0400
> > From: John Durkin <jrd5084 at psu.edu>
> > Subject: Re: [vtkusers] Using vtkLookupTable
> > To: Cory Quammen <cquammen at cs.unc.edu>
> > Cc: vtkusers at vtk.org
> > Message-ID:
> > <fd6f6c1f0909291256u229ce8e5t29b23068daa72835 at mail.gmail.com>
> > Content-Type: text/plain; charset="iso-8859-1"
> >
> > Cory and vtkusers,
> >
> > Is there any way to use vtkcolortransferFunction with vtkActor or is it
> only
> > applicable with vtkVolume?
> >
> > Also any pointers on how to go about having one scalar map the hue and
> > another scalar map to the value (HSV) of the vtkPolyData?
> >
> > thanks,
> >
> > John
> >
> > On Tue, Sep 29, 2009 at 6:15 AM, Cory Quammen <cquammen at cs.unc.edu>
> wrote:
> >
> > > John,
> > >
> > > I don't believe that this is possible with existing classes in VTK.
> > > You could try subclassing vtkLookupTable or vtkColorTransferFunction.
> > >
> > > Cory
> > >
> > > On Mon, Sep 28, 2009 at 10:19 PM, John Durkin <jrd5084 at psu.edu> wrote:
> > > > Dear vtkusers and developers,
> > > >
> > > >
> > > > I've had this problem for a while now and no one seems to be able to
> come
> > > up
> > > > with an answer. I have vtkPolyData that consists of vtkPoints and TWO
> > > sets
> > > > of associated scalars. I want to set the hue of the data using one
> set
> > > of
> > > > scalars and the alpha value (opacity) using the other set of scalars.
> Is
> > > > there any way to use vtkLookupTable to do this?
> > > >
> > > > thanks,
> > > >
> > > > John
> > > >
> > > > _______________________________________________
> > > > Powered by www.kitware.com
> > > >
> > > > Visit other Kitware open-source projects at
> > > > http://www.kitware.com/opensource/opensource.html
> > > >
> > > > Please keep messages on-topic and check the VTK FAQ at:
> > > > http://www.vtk.org/Wiki/VTK_FAQ
> > > >
> > > > Follow this link to subscribe/unsubscribe:
> > > > http://www.vtk.org/mailman/listinfo/vtkusers
> > > >
> > > >
> > >
> > >
> > >
> > > --
> > > Cory Quammen
> > > Center for Computer Integrated Systems for Microscopy and Manipulation
> > > (CISMM)
> > > Department of Computer Science
> > > University of North Carolina at Chapel Hill
> > > http://www.cs.unc.edu/~cquammen <http://www.cs.unc.edu/%7Ecquammen> <
> http://www.cs.unc.edu/%7Ecquammen>
> > >
> > -------------- next part --------------
> > An HTML attachment was scrubbed...
> > URL: <
> http://www.vtk.org/pipermail/vtkusers/attachments/20090929/113e03fa/attachment-0001.htm
> >
> >
> > ------------------------------
> >
> > Message: 4
> > Date: Tue, 29 Sep 2009 13:50:56 -0700
> > From: "David Thompson" <dcthomp at sandia.gov>
> > Subject: Re: [vtkusers] vtk equivalent for ParaView's Tetraheralize
> > filter?
> > To: "Eric Mark" <emark at arl.army.mil>
> > Cc: "vtkusers at vtk.org" <vtkusers at vtk.org>
> > Message-ID: <B0EDA740-3D30-4EB5-840B-EEB18F05CB73 at sandia.gov>
> > Content-Type: text/plain; charset=us-ascii; format=flowed; delsp=yes
> >
> > Hi Eric,
> >
> > If you look in Servers/ServerManager/Resources/filters.xml, you'll see
> > the name of the ParaView filter (Tetrahedralize) as a SourceProxy
> > label attribute and the name of the class implementing the filter
> > (vtkDataSetTriangleFilter) as the class attribute of the same
> > SourceProxy entry. The vtkDataSetTriangleFilter can be found in VTK/
> > Graphics/vtkDataSetTriangleFilter.h .
> >
> > David
> >
> > On Sep 29, 2009, at 12:50 , Eric Mark (CISD/CIV) wrote:
> >
> > > Hello All,
> > >
> > > I'm attempting to convert an unstructured grid to a tetrahedral mesh
> > > and
> > > have been trying to use the Delauney3D filter but the results are not
> > > what I expected. I've tried adjusting the Tolerance and Offset
> > > parameters but it still seems to be connecting points that it
> > > shouldn't.
> > >
> > > If I read the dataset into ParaView and use the Tetrahedralize
> > > filter it
> > > seems to give me exactly what I want. Is there an equivalent filter
> > > or
> > > combination of filters in vtk that I can use? I've looked through the
> > > class list but I don't see anything that appears to operate on the
> > > whole
> > > dataset and generate tets. Does anyone know of an equivalent?
> > >
> > > Thanks,
> > >
> > > Eric
> > > _______________________________________________
> > > Powered by www.kitware.com
> > >
> > > Visit other Kitware open-source projects at
> http://www.kitware.com/opensource/opensource.html
> > >
> > > Please keep messages on-topic and check the VTK FAQ at:
> http://www.vtk.org/Wiki/VTK_FAQ
> > >
> > > Follow this link to subscribe/unsubscribe:
> > > http://www.vtk.org/mailman/listinfo/vtkusers
> > >
> >
> >
> >
> >
> > ------------------------------
> >
> > Message: 5
> > Date: Tue, 29 Sep 2009 17:48:49 -0400
> > From: "Mark, Eric (Civ, ARL/CISD)" <emark at arl.army.mil>
> > Subject: Re: [vtkusers] vtk equivalent for ParaView's Tetraheralize
> > filter? (UNCLASSIFIED)
> > To: "David Thompson" <dcthomp at sandia.gov>
> > Cc: vtkusers at vtk.org
> > Message-ID:
> > <56D23B61D58733478FA4E0C1434AAC58023FE90A at ARLABML02.DS.ARL.ARMY.MIL>
> > Content-Type: text/plain; charset="us-ascii"
> >
> > Classification: UNCLASSIFIED
> > Caveats: NONE
> >
> > Hi David,
> >
> > Thanks for the pointer to find the actual filter. I had searched for
> > tetrahedra in the Paraview source and didn't find anything.
> > I was actually using the vtkDataSetTriangleFilter as the input to the
> > Delaunay3D filter since the DataSetTriangleFilter was producing triangles
> as
> > output and I needed tets. It turns out that I had a geometryFilter before
> > the DataSetTriangleFilter so the output was only 2D. Taking out the
> geometry
> > filter did the trick.
> >
> > Your pointer was the ticket to the solution.
> >
> > Thanks again,
> >
> > Eric
> >
> > Classification: UNCLASSIFIED
> > Caveats: NONE
> >
> > -------------- next part --------------
> > A non-text attachment was scrubbed...
> > Name: smime.p7s
> > Type: application/x-pkcs7-signature
> > Size: 5194 bytes
> > Desc: not available
> > URL: <
> http://www.vtk.org/pipermail/vtkusers/attachments/20090929/868ff6c7/attachment-0001.bin
> >
> >
> > ------------------------------
> >
> > Message: 6
> > Date: Wed, 30 Sep 2009 22:40:58 +1300
> > From: Helvin Lui <helvinlui at gmail.com>
> > Subject: [vtkusers] VTK in Python -how?
> > To: vtkusers at vtk.org
> > Message-ID:
> > <f27262c50909300240h2ee96579y9f3e7c613400356f at mail.gmail.com>
> > Content-Type: text/plain; charset="iso-8859-1"
> >
> > Hi!
> > I documented how to install VTK for use with python in my blog, but right
> > now am wondering if I did so correctly. Is anyone kind enough to check?
> > There weren't many detailed explanations online about this when I started
> > and hence my documentation.
> >
> http://learnwithhelvin.blogspot.com/2009/07/how-to-install-vtk-for-use-with-python.html
> >
> > Another thing is that in my app, I append the path to the VTK Python
> > bindings. But then I realised in order for my 'import vtk' line to work,
> my
> > app's main script needed to be in the directory where vtkpython.exe has
> been
> > installed. In my case: C:\Qt\VTKbin7\bin\release. Is there some way that
> I
> > could use so that my app can use VTK outside of its bin directory? I
> tried
> > adding its bin path to my system variables and also appended it at the
> top
> > of my script: sys.path.append("C:\Qt\VTKbin7\bin\release").
> >
> > Kind Regards,
> > Helvin Lui
> > Newbie
> > -------------- next part --------------
> > An HTML attachment was scrubbed...
> > URL: <
> http://www.vtk.org/pipermail/vtkusers/attachments/20090930/d6f14514/attachment-0001.htm
> >
> >
> > ------------------------------
> >
> > Message: 7
> > Date: Wed, 30 Sep 2009 13:07:36 +0200
> > From: Piotr Byzia <piotr.byzia at gmail.com>
> > Subject: Re: [vtkusers] QVTKRenderWindowInteractor crashes under Mac
> > OS X 10.6 + CMake x86_64 issue
> > To: Clinton Stimpson <clinton at elemtech.com>
> > Cc: vtkusers at vtk.org
> > Message-ID: <C68CC99F-6327-4892-8D32-59B73D1EBCB9 at gmail.com>
> > Content-Type: text/plain; charset=us-ascii; format=flowed; delsp=yes
> >
> > Hi Clinton,
> >
> > On 22.09.2009, at 18:38, Clinton Stimpson wrote:
> >
> > > Is your VTK configured to use Cocoa? And your Qt to use Carbon?
> >
> > My VTK is configured to use Cocoa, not Carbon.
> > I don't remember how I configured QT and how to check it. Is there a
> > simple way to do it?
> >
> > > Have you ever gotten PyQt (Carbon) with VTK (Carbon) to work on Mac
> > > OS X?
> >
> > No, I haven't. QVTKRenderWindowInteractor is my 1st attempt and I
> > tried it with VTK(Cocoa) and QT(Carbon or Cocoa-don't know).
> >
> > > I didn't think it worked, because of previous limitations in Carbon's
> > > HIToolbox when used with OpenGL. Modifying vtkCarbonRenderWindow to
> > > use new
> > > Mac 10.5 apis might help it work.
> > >
> > > Using Cocoa all around should work better, but you'll need to
> > > rebuild your Qt,
> > > and use VTK from CVS.
> >
> > I will try that.
> >
> > But here is another issue with 10.6 (Cmake 2.6-4):
> >
> > Linking CXX shared library ../bin/libvtkCommonPythonD.dylib
> > ld: warning: in /Library/Frameworks//Python.framework/Python, missing
> > required architecture x86_64 in file
> >
> > What should I specify to correct this?
> > I have
> > CMAKE_OSX_ARCHITECTURES i386
> > CMAKE_OSX_SYSROOT /Developer/SDKs/MacOSX10.6.sdk
> >
> > Regards,
> > Piotr
> >
> > > Clint
> > >
> > > On Tuesday 22 September 2009 10:04:04 am Piotr Byzia wrote:
> > >> Dear all,
> > >>
> > >> When launching VTK/Wrapping/Python/vtk/qt4/
> > >> QVTKRenderWindowInteractor.py it crashes with traceback as below.
> > >>
> > >> I'm using
> > >> PyQt 4.5.4
> > >> VTK 5.4.2
> > >> Python 2.6.1
> > >>
> > >> Phil Thompson (author of the patch for PyQt4 release) suggested that
> > >> it's problem on the Apple side.
> > >>
> > >> Does anyone know how to fix it or what exactly is causing this
> > >> behavior?
> > >>
> > >> Best regards,
> > >> Piotr Byzia
> > >>
> > >>
> > >>
> > >> $ python QVTKRenderWindowInteractor.py
> > >> 2009-09-22 17:30:04.641 python[284:903] invalid drawable
> > >> 2009-09-22 17:30:04.646 python[284:903] invalid drawable
> > >> 2009-09-22 17:30:04.802 python[284:903] -[NSHIObject frame]:
> > >> unrecognized selector sent to instance 0x1672360
> > >> 2009-09-22 17:30:04.897 python[284:903] HIToolbox: ignoring exception
> > >> '-[NSHIObject frame]: unrecognized selector sent to instance
> > >> 0x1672360' that raised inside Carbon event dispatch
> > >> (
> > >> 0 CoreFoundation 0x905a258a __raiseError +
> > >> 410
> > >> 1 libobjc.A.dylib 0x917bbf49
> > >> objc_exception_throw + 56
> > >> 2 CoreFoundation 0x905ee9db -[NSObject
> > >> (NSObject) doesNotRecognizeSelector:] + 187
> > >> 3 CoreFoundation 0x9054a026
> > >> ___forwarding___ +
> > >> 950
> > >> 4 CoreFoundation 0x905edd92
> > >> __forwarding_prep_1___ + 50
> > >> 5 libvtkRendering.5.4.dylib 0x05f50836
> > >> _ZN20vtkCocoaRenderWindow7GetSizeEv + 94
> > >> 6 libvtkRendering.5.4.dylib 0x05e4f9af
> > >> _ZN15vtkRenderWindow6RenderEv + 1773
> > >> 7 libvtkRenderingPythonD.5.4.dylib 0x05ac7da3
> > >> _Z24PyvtkRenderWindow_RenderP7_objectS0_ + 103
> > >> 8 .Python 0x000b575d
> > >> PyEval_EvalFrameEx
> > >> + 24210
> > >> 9 .Python 0x000b6177 PyEval_EvalCodeEx
> > >> + 1967
> > >> 10 .Python 0x0003b69c function_call +
> > >> 162
> > >> 11 .Python 0x0000e606 PyObject_Call +
> > >> 77
> > >> 12 .Python 0x0001f51e
> > >> instancemethod_call + 401
> > >> 13 .Python 0x0000e606 PyObject_Call +
> > >> 77
> > >> 14 .Python 0x000aeaa3
> > >> PyEval_CallObjectWithKeywords + 72
> > >> 15 sip.so 0x006cf4dd
> > >> sip_api_call_method + 76
> > >> 16 QtGui.so 0x020046cd
> > >> _Z13sipVH_QtGui_416PyGILState_STATEP7_objectP11QPaintEvent + 91
> > >> 17 QtGui.so 0x0241bdf9
> > >> _ZN10sipQWidget10paintEventEP11QPaintEvent + 121
> > >> 18 QtGui 0x028ed3be
> > >> _ZN7QWidget5eventEP6QEvent + 3934
> > >> 19 QtGui.so 0x0241b790
> > >> _ZN10sipQWidget5eventEP6QEvent + 102
> > >> 20 QtGui 0x028a0c0f
> > >> _ZN19QApplicationPrivate13notify_helperEP7QObjectP6QEvent + 191
> > >> 21 QtGui 0x028a7a3c
> > >> _ZN12QApplication6notifyEP7QObjectP6QEvent + 1036
> > >> 22 QtGui.so 0x023d27c3
> > >> _ZN15sipQApplication6notifyEP7QObjectP6QEvent + 109
> > >> 23 QtCore 0x012d1bd2
> > >> _ZN16QCoreApplication14notifyInternalEP7QObjectP6QEvent + 98
> > >> 24 QtGui 0x02847870
> > >>
> _ZN14QWidgetPrivate15qt_widget_eventEP25OpaqueEventHandlerCallRefP14OpaqueE
> > >> ventRefPv + 4416
> > >> 25 HIToolbox 0x97b4a129
> > >>
> _ZL23DispatchEventToHandlersP14EventTargetRecP14OpaqueEventRefP14HandlerCal
> > >> lRec + 1567
> > >> 26 HIToolbox 0x97b493f0
> > >>
> _ZL30SendEventToEventTargetInternalP14OpaqueEventRefP20OpaqueEventTargetRef
> > >> P14HandlerCallRec + 411
> > >> 27 HIToolbox 0x97b4924f
> > >> SendEventToEventTargetWithOptions + 58
> > >> 28 HIToolbox 0x97b7115d
> > >> _ZN6HIView8SendDrawEsP13OpaqueGrafPtrPK9__HIShapeP9CGContext + 475
> > >> 29 HIToolbox 0x97b70ab1
> > >> _ZN6HIView23RecursiveDrawCompositedEPK9__HIShapemPS_P9CGContexthf +
> > >> 713
> > >> 30 HIToolbox 0x97b70d24
> > >> _ZN6HIView23RecursiveDrawCompositedEPK9__HIShapemPS_P9CGContexthf +
> > >> 1340
> > >> 31 HIToolbox 0x97b70d24
> > >> _ZN6HIView23RecursiveDrawCompositedEPK9__HIShapemPS_P9CGContexthf +
> > >> 1340
> > >> 32 HIToolbox 0x97b6fad7
> > >>
> _ZN6HIView14DrawCompositedEsP13OpaqueGrafPtrPK9__HIShapemPS_P9CGContext
> > >> + 873
> > >> 33 HIToolbox 0x97b6f71d
> > >> _ZN6HIView4DrawEsP13OpaqueGrafPtrm + 83
> > >> 34 HIToolbox 0x97b6f66d
> > >> _ZN6HIView6RenderEmP9CGContext + 45
> > >> 35 HIToolbox 0x97b6efaf
> > >> _ZN10WindowData20PrepareForVisibilityEv + 145
> > >> 36 HIToolbox 0x97b6e589
> > >> _ShowHideWindows +
> > >> 286
> > >> 37 HIToolbox 0x97b6e468 ShowHide + 38
> > >> 38 QtGui 0x02844bf7
> > >> _ZN14QWidgetPrivate8show_sysEv + 775
> > >> 39 QtGui 0x028f06a9
> > >> _ZN14QWidgetPrivate11show_helperEv + 297
> > >> 40 QtGui 0x028f0da3
> > >> _ZN7QWidget10setVisibleEb + 1267
> > >> 41 QtGui.so 0x0241b51e
> > >> _ZN10sipQWidget10setVisibleEb + 108
> > >> 42 QtGui.so 0x024239cb meth_QWidget_show
> > >> + 121
> > >> 43 .Python 0x000b575d
> > >> PyEval_EvalFrameEx
> > >> + 24210
> > >> 44 .Python 0x000b5998
> > >> PyEval_EvalFrameEx
> > >> + 24781
> > >> 45 .Python 0x000b6177 PyEval_EvalCodeEx
> > >> + 1967
> > >> 46 .Python 0x000b632e PyEval_EvalCode
> > >> + 87
> > >> 47 .Python 0x000d9bbf PyRun_FileExFlags
> > >> + 150
> > >> 48 .Python 0x000da9a7
> > >> PyRun_SimpleFileExFlags + 818
> > >> 49 .Python 0x000eaf30 Py_Main + 3481
> > >> 50 python 0x00001f8e 0x0 + 8078
> > >> 51 python 0x00001eb5 0x0 + 7861
> > >> )
> > >>
> > >> _______________________________________________
> > >> Powered by www.kitware.com
> > >>
> > >> Visit other Kitware open-source projects at
> > >> http://www.kitware.com/opensource/opensource.html
> > >>
> > >> Please keep messages on-topic and check the VTK FAQ at:
> > >> http://www.vtk.org/Wiki/VTK_FAQ
> > >>
> > >> Follow this link to subscribe/unsubscribe:
> > >> http://www.vtk.org/mailman/listinfo/vtkusers
> > >
> >
> >
> >
> > ------------------------------
> >
> > Message: 8
> > Date: Wed, 30 Sep 2009 13:25:02 +0200
> > From: Charl Botha <c.p.botha at tudelft.nl>
> > Subject: Re: [vtkusers] VTK in Python -how?
> > To: Helvin Lui <helvinlui at gmail.com>
> > Cc: vtkusers at vtk.org
> > Message-ID:
> > <31ddba770909300425o3597c769u112689c1b16dad0a at mail.gmail.com>
> > Content-Type: text/plain; charset=ISO-8859-1
> >
> > > Another thing is that in my app, I append the path to the VTK Python
> > > bindings. But then I realised in order for my 'import vtk' line to
> work, my
> > > app's main script needed to be in the directory where vtkpython.exe has
> been
> > > installed. In my case:?C:\Qt\VTKbin7\bin\release. Is there some way
> that I
> > > could use so that my app can use VTK outside of its bin directory? I
> tried
> > > adding its bin path to my system variables and also appended it at the
> top
> > > of my script:?sys.path.append("C:\Qt\VTKbin7\bin\release").
> >
> > See the instructions at
> >
> http://cpbotha.net/2009/08/13/python-2-6-enabled-vtk-5-4-windows-binaries/
> >
> > If you add, under windows, the necessary paths to PATH and PYTHONPATH,
> > import vtk should work in your normal "python" executable.
> >
> >
> > ------------------------------
> >
> > Message: 9
> > Date: Wed, 30 Sep 2009 09:41:23 -0400
> > From: Arsham Mesbah <arsham at uga.edu>
> > Subject: [vtkusers] How to read this!
> > To: vtkusers at vtk.org
> > Message-ID:
> > <303b1f660909300641t3ee96c5apdb5021ee5d1f5c4e at mail.gmail.com>
> > Content-Type: text/plain; charset="iso-8859-1"
> >
> > I have a raw data that I am trying to read using VTK the data for mat is
> as
> > follows:
> >
> > LINES 18281 1716999
> > 41 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
> > 25.........
> > 95 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
> 6...........
> >
> > so basically you have 18281 lines and the first number in the line "41"
> > here for the first line shows how many point Ids you gonna have in that
> > line! (points are connected to create a line!) I need to store the points
> in
> > to the vector! so I have the vector 2D and I just need to adjust one of
> the
> > dimensions according to how many there are in a line! How can I read only
> > the first Number?
> >
> > I tried
> > vtkPolyData* fbData = vtkPolyData::New();
> > fbData = poly_Reader->GetOutput();
> >
> > I read number of points and cells (here number of cells is one of the
> > dimensions in the vector) but I cant find smth to just read the first
> > element of the line and then put the rest in to the vector according to
> that
> > number! Any idea how to do this?
> > --
> > Sincerely Yours,
> > A.M
> > -------------- next part --------------
> > An HTML attachment was scrubbed...
> > URL: <
> http://www.vtk.org/pipermail/vtkusers/attachments/20090930/772b5bee/attachment-0001.htm
> >
> >
> > ------------------------------
> >
> > Message: 10
> > Date: Wed, 30 Sep 2009 10:27:29 -0400
> > From: Dajiang Zhu <djzhu at uga.edu>
> > Subject: [vtkusers] Anyone knows how to calculate a specific point on
> > a poly surface?
> > To: vtkusers at vtk.org
> > Message-ID:
> > <42f970280909300727i5774ea9cmbeb35b125399fdcb at mail.gmail.com>
> > Content-Type: text/plain; charset="iso-8859-1"
> >
> > hi, I have a poly surface. I know two points on the surface A and B. I
> also
> > have a point C outside the surface. Now I want to find point D on the
> > surface which has the same distance with line AB as C. It seems like find
> > the intersection point with an arc and a surface. I know CellLocator can
> > find the intersection point with a line but how about an arc? Anyone has
> an
> > idea? Thanks
> >
> >
> > Best,
> >
> >
> > Dajiang
> > -------------- next part --------------
> > An HTML attachment was scrubbed...
> > URL: <
> http://www.vtk.org/pipermail/vtkusers/attachments/20090930/a0e8463d/attachment-0001.htm
> >
> >
> > ------------------------------
> >
> > Message: 11
> > Date: Wed, 30 Sep 2009 10:59:56 -0400
> > From: "Sean McBride" <sean at rogue-research.com>
> > Subject: Re: [vtkusers] QVTKRenderWindowInteractor crashes under Mac
> > OS X 10.6 + CMake x86_64 issue
> > To: "Piotr Byzia" <piotr.byzia at gmail.com>, "Clinton Stimpson"
> > <clinton at elemtech.com>
> > Cc: vtkusers at vtk.org
> > Message-ID: <20090930145956.1180993022 at kingu.local>
> > Content-Type: text/plain; charset=ISO-8859-1
> >
> > On 9/30/09 1:07 PM, Piotr Byzia said:
> >
> > >But here is another issue with 10.6 (Cmake 2.6-4):
> > >
> > >Linking CXX shared library ../bin/libvtkCommonPythonD.dylib
> > >ld: warning: in /Library/Frameworks//Python.framework/Python, missing
> > >required architecture x86_64 in file
> > >
> > >What should I specify to correct this?
> > >I have
> > >CMAKE_OSX_ARCHITECTURES i386
> > >CMAKE_OSX_SYSROOT /Developer/SDKs/MacOSX10.6.sdk
> >
> > You might be seeing:
> > <http://public.kitware.com/Bug/view.php?id=9466>
> >
> > Try CMake from CVS.
> >
> > --
> > ____________________________________________________________
> > Sean McBride, B. Eng sean at rogue-research.com
> > Rogue Research www.rogue-research.com
> > Mac Software Developer Montr?al, Qu?bec, Canada
> >
> >
> >
> >
> > ------------------------------
> >
> > _______________________________________________
> > vtkusers mailing list
> > vtkusers at vtk.org
> > http://www.vtk.org/mailman/listinfo/vtkusers
> >
> >
> > End of vtkusers Digest, Vol 65, Issue 33
> > ****************************************
>
> ------------------------------
> Invite your mail contacts to join your friends list with Windows Live
> Spaces. It's easy! Try it!<http://spaces.live.com/spacesapi.aspx?wx_action=create&wx_url=/friends.aspx&mkt=en-us>
>
> _______________________________________________
> Powered by www.kitware.com
>
> Visit other Kitware open-source projects at
> http://www.kitware.com/opensource/opensource.html
>
> Please keep messages on-topic and check the VTK FAQ at:
> http://www.vtk.org/Wiki/VTK_FAQ
>
> Follow this link to subscribe/unsubscribe:
> http://www.vtk.org/mailman/listinfo/vtkusers
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.vtk.org/pipermail/vtkusers/attachments/20091001/bdc31dfa/attachment.htm>