[vtkusers] vtkImageReslice class

vidyadhar vidyadhar at lucidindia.net
Fri May 25 00:13:29 EDT 2007


Hi,
VTK documentation indicates that vtkImageReslice is derived from vtkImageAlgorithm so GetOutput will return vtkImageData object. Check the documentation.
HTH
Vidyadhar
  ----- Original Message ----- 
  From: Emmanouil Moschidis 
  To: David Gobbi 
  Cc: vtkusers at vtk.org 
  Sent: Wednesday, May 23, 2007 4:04 PM
  Subject: Re: [vtkusers] vtkImageReslice class


  Can someone load the image coming from the vtkImageReslice to a vtkImageData object? (is it the correct object to load an image to?)  Is there any snippet of code? 

  I want to get the image from vtkImageReslice read the pixels (this seems to be also a problem - hot to get the pixels from vtkImageData) and then use custom classes and viewer for visualizing the result.    

  David Gobbi <dgobbi at atamai.com> wrote:
    Hi Emmanouil,

    If you are reading DICOM files from disk, you need to use the
    vtkDICOMImageReader instead of vtkImageReader2.

    If you search the mailing list archive for "DICOM" you will
    get lots of information (perhaps an overload) about reading
    DICOM into VTK.

    - David


    Emmanouil Moschidis wrote:
    > Hi again I decided to go the easy way and read from the hard disk. So 
    > I get the path of the already loaded series, but I get the error
    >
    > Could not open file 
    > /Users/osirix/Documents/Emmanouil/MyTestImages/MRkid/05050914/.1
    >
    > the path is /Users/osirix/Documents/Emmanouil/MyTestImages/MRkid/05050914/
    > even when I hardcode the path i get the same result. Do you know what 
    > might be wrong? (btw is the last forward slash necessary ? ) 
    >
    > */David Gobbi /* wrote:
    >
    > Hi Emmanouil,
    >
    > One thing you can do is create a vtkImageImport object for each DICOM
    > image, this will allow you to create a vtkImageData from each
    > DICOM that
    > you have stored in memory. Then, you can use vtkImageAppend to create
    > an image volume out of the series of images. The output of
    > vtkImageAppend can be used by vtkImageReslice.
    >
    > - David
    >
    >
    > Emmanouil Moschidis wrote:
    > > Before being able to use some parts of the code I have to solve a
    > > different problem. (I posted a new question but either it was not
    > > quite clear or nobody has done that before (?) )
    > >
    > > I work within a DICOM viewer so the DICOM series are already
    > loaded (I
    > > do not read from a file like in case of the vtkImageReader2).
    > Actually
    > > every DICOM image is stored in a custom class and all together in a
    > > NSArray (yes it is objective-C). So I want to load the images
    > from the
    > > NSArray to the vtkImageReader2 object... I am not sure how
    > should I do
    > > that.
    > >
    > > Maybe first I need to load them into a vtkImageData object?
    > (still I
    > > haven't found any example for that)
    > >
    > > And then again I have the problem how to get the output
    > properly. But
    > > I guess these questions do not belong to this class.
    > >
    > > */David Gobbi /* wrote:
    > >
    > > Hi Emmanouil,
    > >
    > > The best example for what you are trying to do is probably this one:
    > >
    > > VTK/Examples/ImageProcessing/Cxx/ImageSlicing.cxx
    > >
    > > This example is only in the CVS version of VTK, it isn't in the
    > VTK 5
    > > release.
    > >
    > > What I do with tracking systems is use the coordinate/quaternion
    > from
    > > the tracking system to create a vtkTransform, then I concatenate
    > that
    > > transform with a vtkMatrix4x4 from the patient registration, and
    > then
    > > feed the resulting transform to vtkImageReslice as the
    > > ResliceTransform.
    > >
    > > If you have looked at the class page for vtkImageReslice, you will
    > > notice that there are two methods for setting orientations:
    > > SetResliceAxes() and SetResliceTransform().
    > >
    > > For tracking, I always set ResliceTransform to the
    > > position/orientation
    > > of the tool (in patient coordinates), and then set the ResliceAxes
    > > according to how I want to orient the slice relative to
    > > orientation of
    > > the tool. In that way, the ResliceAxes is used to choose the tool
    > > axes
    > > along which you will be extracting the slice.
    > >
    > > The tricky thing with vtkImageReslice is getting the OutputOrigin,
    > > OutputSpacing, and OutputExtent set properly for your application.
    > > Together, these parameters can be used to describe an output slice
    > > plane
    > > with a particular pixel spacing. So for example:
    > >
    > > OutputOrigin = (-127.5, -127.5, 0.0)
    > > OutputSpacing = (1.0, 1.0, 1.0)
    > > OutputExtent = (0, 255, 0, 255, 0, 0)
    > >
    > > These describe a 256x256 output slice with 1mm pixel spacing. The
    > > first
    > > pixel is at (-127.5,-127.5,0) in the "output coordinate system" of
    > > vtkImageReslice. The centre of the slice is at (0,0,0) in the
    > "output
    > > coordinate system" of vtkImageReslice.
    > >
    > > Now, the original input volume is in the "input coordinate
    > system" of
    > > vtkImageReslice. We can call the input coordinate system "x" and the
    > > output coordinate system "x'". The relationship between these
    > > coordinates is as follows:
    > >
    > > x = T*M*x' where "T" is ResliceTransform and "M" is ResliceMatrix
    > >
    > > So this tells you that, if "M" is chosen to be a pure rotation
    > > matrix,
    > > and if "T" contains the position of the tool point in input image
    > > coordinates, then the point x' = (0,0,0), which is in the centre
    > > of our
    > > output plane, will correspond to the point x = tool_point. So, we
    > > will
    > > be extracting a slice through the tool point position.
    > >
    > > I know that is probably not the best description, let me know if
    > > things
    > > aren't quite clear.
    > >
    > > - David
    > >
    > >
    > >
    > >
    > > Emmanouil Moschidis wrote:
    > > > Hello
    > > >
    > > > I want to use the vtkImageReslice class for reading a series of
    > > slices
    > > > and exctracting one slice based on coordinates and quaternions
    > > > received from a tracking system.
    > > >
    > > > Is there any specific documentation and/or any working
    > examples for
    > > > this class? It is very powerful yet the only usable information
    > > I have
    > > > found is the class reference webpage.
    > > >
    > > > Any hint about how to proceed towards the insight of it would be
    > > > highly appreciated
    > > >
    > > > thanks
    > > >
    > > >
    > >
    > ------------------------------------------------------------------------
    > > > Sick sense of humor? Visit Yahoo! TV's Comedy with an Edge
    > > > to
    > > > see what's on, when.
    > > >
    > >
    > ------------------------------------------------------------------------
    > > >
    > > > _______________________________________________
    > > > This is the private VTK discussion list.
    > > > Please keep messages on-topic. Check the FAQ at:
    > > http://www.vtk.org/Wiki/VTK_FAQ
    > > > Follow this link to subscribe/unsubscribe:
    > > > http://www.vtk.org/mailman/listinfo/vtkusers
    > > >
    > >
    > >
    > >
    > ------------------------------------------------------------------------
    > > Be a PS3 game guru.
    > > Get your game face on with the latest PS3 news and previews at
    > Yahoo!
    > > Games.
    >
    >
    > ------------------------------------------------------------------------
    > Yahoo! oneSearch: Finally, mobile search that gives answers 
    > , 
    > not web links. 






------------------------------------------------------------------------------
  Pinpoint customers who are looking for what you sell. 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.vtk.org/pipermail/vtkusers/attachments/20070525/8fc36b3d/attachment.htm>


More information about the vtkusers mailing list