[Rtk-users] Geometry settings

[Guangming Zang]

Yes, sure. Simon. If you think the geometry setting is not correct from the
reconstructed images. Of course it is I that should  figure it out.
Thanks again for the help. :)
Regards
Guangming

*Guangming Zang (Alex)*
*King Abdullah University of Science and Technology(KAUST)*
*University of Chinese Academy of Sciences(UCAS)*




2015-06-02 21:15 GMT+03:00 Simon Rit <simon.rit at creatis.insa-lyon.fr>:

> Hi,
> Yes, after looking at the images again, there is clearly a geometry
> problem. I don't understand what is your geometry but since you have a
> lot of information for RTK geometry (wiki document + code), maybe it's
> up to you to figure it out?
> Good luck and regards,
> Simon
>
> On Tue, Jun 2, 2015 at 7:56 PM, Guangming Zang
> <guangming.zang at kaust.edu.sa> wrote:
> > Hi Simon,
> > Thanks for prompt reply.
> > Actually, i used one iteration in FDK reconstruction, and 20 iterations
> in
> > ADMMTV(5 conjugate gradient in each ADMM), which  is enough i think.
> > Now i am thinking maybe the problem is caused by geometry settings, and
> if
> > so, i really need your help:
> > In my own project, i use the "cone beam angle" and the "souce to
> isocenter
> > distance"(same as sid in RTK) to set the scene,please see the attached
> > geometry image.
> >
> > To make the same geometry in RTK ,  if the Projection size is A(pls see
> the
> > attached image), and the detector length is B(i.e., the projection image
> > size is B). in RTK ,
> > i set the SDD=SDD*B/A, and SID=SID. i thought it is correct because the
> > reconstructed volume size and slice size are same with ground truth, but
> i
> > am really not sure it is right or not.(the projection image is .bmp
> files,i
> > do not know the dpi)
> >
> > i do not know i described it clearly or not. if you need more information
> > ,please let me know.
> > Really appreciated for the help.
> > Regards
> >
> >
> > Guangming Zang (Alex)
> > King Abdullah University of Science and Technology(KAUST)
> > University of Chinese Academy of Sciences(UCAS)
> >
> >
> >
> >
> > ________________________________
> > This message and its contents, including attachments are intended solely
> for
> > the original recipient. If you are not the intended recipient or have
> > received this message in error, please notify me immediately and delete
> this
> > message from your computer system. Any unauthorized use or distribution
> is
> > prohibited. Please consider the environment before printing this email.
>

-- 

------------------------------
This message and its contents, including attachments are intended solely 
for the original recipient. If you are not the intended recipient or have 
received this message in error, please notify me immediately and delete 
this message from your computer system. Any unauthorized use or 
distribution is prohibited. Please consider the environment before printing 
this email.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://public.kitware.com/pipermail/rtk-users/attachments/20150602/addf75e4/attachment-0010.html>