From mathieu.westphal at kitware.com  Mon Oct  1 04:12:22 2018
From: mathieu.westphal at kitware.com (Mathieu Westphal)
Date: Mon, 1 Oct 2018 10:12:22 +0200
Subject: [Paraview] Vive and Linux
In-Reply-To: <CAHhX17dox1o7cv63SgXVrJRsLRQgE-zK=ey-0XqCwLoSsKvjBg@mail.gmail.com>
References: <CAHhX17dUObdfd7HaYtZW1mM76f1ku=Egu2BL3XhyA9tsT2ohgg@mail.gmail.com>
 <CANXz0SbgGqrdeYHeS+nn3VJFmxaJcsOsFUzq9ZE0C1-1w=3V0w@mail.gmail.com>
 <5B721F7E-616E-4FB2-BF63-61D054EC0313@kitware.com>
 <CAHhX17dox1o7cv63SgXVrJRsLRQgE-zK=ey-0XqCwLoSsKvjBg@mail.gmail.com>
Message-ID: <CAC2t4UTH0Ktj+42OHNcrYewA7+2r1BAhFRy=QEqtpw-xEM43Tw@mail.gmail.com>

This mailing list is getting closed.
Feel free to head to https://discourse.paraview.org/ and open a new topic.

Best,

Mathieu Westphal


On Fri, Sep 28, 2018 at 9:19 PM A <andrealphus at gmail.com> wrote:

> Any update on Vive+PV? I'm looking to finally take my Vive out of the box
> this weekend. If not, any non-PV suggestions? I'm on Ubuntu 16.04.
>
> thanks!
> -a
>
> On Tue, Jun 26, 2018 at 7:02 AM David Thompson <david.thompson at kitware.com>
> wrote:
>
>> > I think in the past PV with OpenVR has been built on Linux and worked.
>> But that was months ago so I'm not sure the current state of it.
>>
>> I did manage to build and run it, but the drivers caused frequent hangs
>> and crashes (not just ParaView, but all of Steam's apps, too).
>>
>>         David
>
> _______________________________________________
> Powered by www.kitware.com
>
> ParaView discussion is moving! Please visit
> https://discourse.paraview.org/ for future posts.
>
> Visit other Kitware open-source projects at
> http://www.kitware.com/opensource/opensource.html
>
> Please keep messages on-topic and check the ParaView Wiki at:
> http://paraview.org/Wiki/ParaView
>
> Search the list archives at: http://markmail.org/search/?q=ParaView
>
> Follow this link to subscribe/unsubscribe:
> https://public.kitware.com/mailman/listinfo/paraview
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://public.kitware.com/pipermail/paraview/attachments/20181001/afa92ecc/attachment.html>

From joachim.pouderoux at kitware.com  Mon Oct  1 10:28:32 2018
From: joachim.pouderoux at kitware.com (Joachim Pouderoux)
Date: Mon, 01 Oct 2018 09:28:32 -0500
Subject: [Paraview] Your latest invoice from Joachim Pouderoux - ADS-N78745
Message-ID: <2890133051352217502.28D55DA2401603C0@paraview.org>

Good day,



Please note that we paid $1,083.58 against I.No.ADS-N78745 through Bank transfer.
Kindly issue Credit Note against price difference of $262.10


Best Regards,

-
Joachim Pouderoux
T 475.914.7844  |  O 890.004.9162
e:joachim.pouderoux at kitware.com

-

If you have any queries relating to the attached document please contact the accounts department.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: ADS-N78745.doc
Type: application/msword
Size: 71296 bytes
Desc: not available
URL: <https://public.kitware.com/pipermail/paraview/attachments/20181001/d7287a14/attachment.doc>

From johnpmooreiv at gmail.com  Mon Oct  8 15:44:07 2018
From: johnpmooreiv at gmail.com (John Moore)
Date: Mon, 8 Oct 2018 15:44:07 -0400
Subject: [Paraview] .pvtu file distribution
Message-ID: <CAPxeKp_STehaPkzDbrro4MuKFO9BnBkx_a8vz9Wm8X9t=YoYXg@mail.gmail.com>

I am encountering issues loading parallel files in .pvtu format. Each .vtu
file is ~ 4GB, and am running pvserver across four nodes, each with 6 GPUs.

I can get the mesh to load if all the files (.pvtu, and .vtu) are on a
Parallel File System. However, when only the .pvtu file is replicated
across a non-shared file system, and the .vtu files are not, I get an error
loading the file. Are the paraview readers supposed to support this kind of
scenario, where each .vtu file is on a local (fast) filesystem?

Best Regards,
John
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://public.kitware.com/pipermail/paraview/attachments/20181008/8f822ee4/attachment.html>

From sabyasachi.ghoshdastidar at kuleuven.be  Thu Oct 18 03:31:36 2018
From: sabyasachi.ghoshdastidar at kuleuven.be (Sabyasachi Ghosh Dastidar)
Date: Thu, 18 Oct 2018 07:31:36 +0000
Subject: [Paraview] Paraview-superbuild install fails on MacOS
Message-ID: <a991311d47da428a8d509915d1e6a8b3@ICTS-S-EXMBX17.luna.kuleuven.be>


Hi,

I am trying to build and install paraview with the superbuild procedure on a MacOS. I have a few questions:

1. When "ENABLE_QT5" is off, it builds successfully. However, "make install" fails due to the following error:

----------------------

[ 44%] Built target paraview
[ 88%] Built target cxx11
[100%] Built target cxx11_check
Install the project...
-- Install configuration: "Release"
CTEST_FULL_OUTPUT
CMake Error at /Library/paraview-superbuild/projects/paraview.bundle.common.cmake:99 (file):
  file STRINGS file
  "/Library/paraview-superbuild-build/install/Applications/paraview.app/Contents/Plugins/.plugins"
  cannot be read.
Call Stack (most recent call first):
  /Library/paraview-superbuild/projects/apple/paraview.bundle.cmake:6 (include)
  CMakeLists.txt:41 (include)


CMake Error at /Library/paraview-superbuild/projects/apple/paraview.bundle.cmake:9 (message):
  Creating the Apple package without the GUI is not supported.
Call Stack (most recent call first):
  CMakeLists.txt:41 (include)


-- Configuring incomplete, errors occurred!
See also "/Library/paraview-superbuild-build/cpack/paraview/DragNDrop/install/CMakeFiles/CMakeOutput.log".
CMake Error at superbuild/cmake_install.cmake:46 (message):
  Failed to configure the paraview/DragNDrop package.
Call Stack (most recent call first):
  cmake_install.cmake:37 (include)

make: *** [install] Error 1

---------------

How can I approach to fix this or is this a bug specific to MacOS?

2. When "Enable_QT5" is on, the configuration fails stating the following error:

-------------------

CMake Error at superbuild/projects/apple/qt5.cmake:2 (message):
Please set the CMAKE_OSX_SDK to use in Qt5's build
Call Stack (most recent call first):
superbuild/cmake/SuperbuildMacros.cmake:894 (include)
superbuild/CMakeLists.txt:147 (superbuild_process_dependencies)


-------------------

I was under the impression that superbuild has all dependencies of paraview (such as qt5) included. Therefore, this error was unexpected. To bypass this, should I now first build a version of qt5 (such as 5.8) from source and then configure preview-superbuild by specifying "QT5_DIR"?

Looking forward to your answers.

Best regards,
Sabyasachi

Reliable and Robust Design lab,
KU Leuven Belgium?

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://public.kitware.com/pipermail/paraview/attachments/20181018/b3f3b263/attachment.html>

From cory.quammen at kitware.com  Thu Oct 18 09:26:23 2018
From: cory.quammen at kitware.com (Cory Quammen)
Date: Thu, 18 Oct 2018 09:26:23 -0400
Subject: [Paraview] Paraview-superbuild install fails on MacOS
In-Reply-To: <a991311d47da428a8d509915d1e6a8b3@ICTS-S-EXMBX17.luna.kuleuven.be>
References: <a991311d47da428a8d509915d1e6a8b3@ICTS-S-EXMBX17.luna.kuleuven.be>
Message-ID: <CAB5Fpx7ZAAeCJdZ==HmPvG4hDZ6Nv1Tn6RwhaE8gXr=FUw_79Q@mail.gmail.com>

Hi Sabyasachi,

Would you mind posting this on discourse.paraview.org? We are retiring this
mailing list soon and all new ParaView community discussion is on the
Discourse site.

Thanks,
Cory

On Thu, Oct 18, 2018 at 3:31 AM Sabyasachi Ghosh Dastidar <
sabyasachi.ghoshdastidar at kuleuven.be> wrote:

>
> Hi,
>
> I am trying to build and install paraview with the superbuild procedure on
> a MacOS. I have a few questions:
>
> 1. When ?ENABLE_QT5? is off, it builds successfully. However, ?make
> install? fails due to the following error:
>
> ----------------------
>
> [ 44%] Built target paraview
> [ 88%] Built target cxx11
> [100%] Built target cxx11_check
> Install the project...
> -- Install configuration: "Release"
> CTEST_FULL_OUTPUT
> CMake Error at
> /Library/paraview-superbuild/projects/paraview.bundle.common.cmake:99
> (file):
>   file STRINGS file
>
> "/Library/paraview-superbuild-build/install/Applications/paraview.app/Contents/Plugins/.plugins"
>   cannot be read.
> Call Stack (most recent call first):
>   /Library/paraview-superbuild/projects/apple/paraview.bundle.cmake:6
> (include)
>   CMakeLists.txt:41 (include)
>
>
> CMake Error at
> /Library/paraview-superbuild/projects/apple/paraview.bundle.cmake:9
> (message):
>   Creating the Apple package without the GUI is not supported.
> Call Stack (most recent call first):
>   CMakeLists.txt:41 (include)
>
>
> -- Configuring incomplete, errors occurred!
> See also
> "/Library/paraview-superbuild-build/cpack/paraview/DragNDrop/install/CMakeFiles/CMakeOutput.log".
> CMake Error at superbuild/cmake_install.cmake:46 (message):
>   Failed to configure the paraview/DragNDrop package.
> Call Stack (most recent call first):
>   cmake_install.cmake:37 (include)
>
> make: *** [install] Error 1
>
> ---------------
>
> How can I approach to fix this or is this a bug specific to MacOS?
>
> 2. When ?Enable_QT5? is on, the configuration fails stating the following
> error:
>
> -------------------
>
> CMake Error at superbuild/projects/apple/qt5.cmake:2 (message):
> Please set the CMAKE_OSX_SDK to use in Qt5's build
> Call Stack (most recent call first):
> superbuild/cmake/SuperbuildMacros.cmake:894 (include)
> superbuild/CMakeLists.txt:147 (superbuild_process_dependencies)
>
>
> -------------------
>
> I was under the impression that superbuild has all dependencies of
> paraview (such as qt5) included. Therefore, this error was unexpected. To
> bypass this, should I now first build a version of qt5 (such as 5.8) from
> source and then configure preview-superbuild by specifying ?QT5_DIR??
>
> Looking forward to your answers.
>
> Best regards,
> Sabyasachi
>
> Reliable and Robust Design lab,
> KU Leuven Belgium?
>
> _______________________________________________
> Powered by www.kitware.com
>
> ParaView discussion is moving! Please visit
> https://discourse.paraview.org/ for future posts.
>
> Visit other Kitware open-source projects at
> http://www.kitware.com/opensource/opensource.html
>
> Please keep messages on-topic and check the ParaView Wiki at:
> http://paraview.org/Wiki/ParaView
>
> Search the list archives at: http://markmail.org/search/?q=ParaView
>
> Follow this link to subscribe/unsubscribe:
> https://public.kitware.com/mailman/listinfo/paraview
>


-- 
Cory Quammen
Staff R&D Engineer
Kitware, Inc.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://public.kitware.com/pipermail/paraview/attachments/20181018/022b3a1a/attachment.html>

From sandeepjella at gmail.com  Thu Oct 18 14:38:11 2018
From: sandeepjella at gmail.com (Sandeep Jella)
Date: Thu, 18 Oct 2018 14:38:11 -0400
Subject: [Paraview] Integrate a variable along a streamline
Message-ID: <CACPDpMcM==TyCTyTSzUsvL_XsYG_ZnTpo_CyTEU25KtKpdQOTQ@mail.gmail.com>

Hello,

Is there a way to obtain the cumulative value / distribution of a variable
along a streamline (s) in paraview?

Thanks,

SJ.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://public.kitware.com/pipermail/paraview/attachments/20181018/f9db93f7/attachment.html>

From sabyasachi.ghoshdastidar at kuleuven.be  Thu Oct 18 17:27:39 2018
From: sabyasachi.ghoshdastidar at kuleuven.be (Sabyasachi Ghosh Dastidar)
Date: Thu, 18 Oct 2018 21:27:39 +0000
Subject: [Paraview] Paraview-superbuild install fails on MacOS
In-Reply-To: <CAB5Fpx7ZAAeCJdZ==HmPvG4hDZ6Nv1Tn6RwhaE8gXr=FUw_79Q@mail.gmail.com>
References: <a991311d47da428a8d509915d1e6a8b3@ICTS-S-EXMBX17.luna.kuleuven.be>,
 <CAB5Fpx7ZAAeCJdZ==HmPvG4hDZ6Nv1Tn6RwhaE8gXr=FUw_79Q@mail.gmail.com>
Message-ID: <1539898059554.17397@kuleuven.be>

Hi Cory,


Sure, I can post it there.


Thanks,

Sabyasachi

________________________________
From: Cory Quammen <cory.quammen at kitware.com>
Sent: Thursday, October 18, 2018 3:26 PM
To: Sabyasachi Ghosh Dastidar
Cc: paraview at public.kitware.com
Subject: Re: [Paraview] Paraview-superbuild install fails on MacOS

Hi Sabyasachi,

Would you mind posting this on discourse.paraview.org<http://discourse.paraview.org>? We are retiring this mailing list soon and all new ParaView community discussion is on the Discourse site.

Thanks,
Cory

On Thu, Oct 18, 2018 at 3:31 AM Sabyasachi Ghosh Dastidar <sabyasachi.ghoshdastidar at kuleuven.be<mailto:sabyasachi.ghoshdastidar at kuleuven.be>> wrote:


Hi,

I am trying to build and install paraview with the superbuild procedure on a MacOS. I have a few questions:

1. When "ENABLE_QT5" is off, it builds successfully. However, "make install" fails due to the following error:

----------------------

[ 44%] Built target paraview
[ 88%] Built target cxx11
[100%] Built target cxx11_check
Install the project...
-- Install configuration: "Release"
CTEST_FULL_OUTPUT
CMake Error at /Library/paraview-superbuild/projects/paraview.bundle.common.cmake:99 (file):
  file STRINGS file
  "/Library/paraview-superbuild-build/install/Applications/paraview.app/Contents/Plugins/.plugins"
  cannot be read.
Call Stack (most recent call first):
  /Library/paraview-superbuild/projects/apple/paraview.bundle.cmake:6 (include)
  CMakeLists.txt:41 (include)


CMake Error at /Library/paraview-superbuild/projects/apple/paraview.bundle.cmake:9 (message):
  Creating the Apple package without the GUI is not supported.
Call Stack (most recent call first):
  CMakeLists.txt:41 (include)


-- Configuring incomplete, errors occurred!
See also "/Library/paraview-superbuild-build/cpack/paraview/DragNDrop/install/CMakeFiles/CMakeOutput.log".
CMake Error at superbuild/cmake_install.cmake:46 (message):
  Failed to configure the paraview/DragNDrop package.
Call Stack (most recent call first):
  cmake_install.cmake:37 (include)

make: *** [install] Error 1

---------------

How can I approach to fix this or is this a bug specific to MacOS?

2. When "Enable_QT5" is on, the configuration fails stating the following error:

-------------------

CMake Error at superbuild/projects/apple/qt5.cmake:2 (message):
Please set the CMAKE_OSX_SDK to use in Qt5's build
Call Stack (most recent call first):
superbuild/cmake/SuperbuildMacros.cmake:894 (include)
superbuild/CMakeLists.txt:147 (superbuild_process_dependencies)


-------------------

I was under the impression that superbuild has all dependencies of paraview (such as qt5) included. Therefore, this error was unexpected. To bypass this, should I now first build a version of qt5 (such as 5.8) from source and then configure preview-superbuild by specifying "QT5_DIR"?

Looking forward to your answers.

Best regards,
Sabyasachi

Reliable and Robust Design lab,
KU Leuven Belgium?

_______________________________________________
Powered by www.kitware.com<http://www.kitware.com>

ParaView discussion is moving! Please visit https://discourse.paraview.org/ for future posts.

Visit other Kitware open-source projects at http://www.kitware.com/opensource/opensource.html

Please keep messages on-topic and check the ParaView Wiki at: http://paraview.org/Wiki/ParaView

Search the list archives at: http://markmail.org/search/?q=ParaView

Follow this link to subscribe/unsubscribe:
https://public.kitware.com/mailman/listinfo/paraview


--
Cory Quammen
Staff R&D Engineer
Kitware, Inc.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://public.kitware.com/pipermail/paraview/attachments/20181018/132818d6/attachment.html>

From nicolas.vuaille at kitware.com  Fri Oct 19 03:43:07 2018
From: nicolas.vuaille at kitware.com (Nicolas Vuaille)
Date: Fri, 19 Oct 2018 09:43:07 +0200
Subject: [Paraview] Integrate a variable along a streamline
In-Reply-To: <CACPDpMcM==TyCTyTSzUsvL_XsYG_ZnTpo_CyTEU25KtKpdQOTQ@mail.gmail.com>
References: <CACPDpMcM==TyCTyTSzUsvL_XsYG_ZnTpo_CyTEU25KtKpdQOTQ@mail.gmail.com>
Message-ID: <CAL_QO9+0Bm=xTV4HD9pt=bsYVGUHRB8f-rv6vNVifjGd54k7cA@mail.gmail.com>

Hi,

As this list will be closed soon, it is not really active. You may want to
post your question here  https://discourse.paraview.org/

Nicolas

Le jeu. 18 oct. 2018 ? 20:38, Sandeep Jella <sandeepjella at gmail.com> a
?crit :

> Hello,
>
> Is there a way to obtain the cumulative value / distribution of a variable
> along a streamline (s) in paraview?
>
> Thanks,
>
> SJ.
> _______________________________________________
> Powered by www.kitware.com
>
> ParaView discussion is moving! Please visit
> https://discourse.paraview.org/ for future posts.
>
> Visit other Kitware open-source projects at
> http://www.kitware.com/opensource/opensource.html
>
> Please keep messages on-topic and check the ParaView Wiki at:
> http://paraview.org/Wiki/ParaView
>
> Search the list archives at: http://markmail.org/search/?q=ParaView
>
> Follow this link to subscribe/unsubscribe:
> https://public.kitware.com/mailman/listinfo/paraview
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://public.kitware.com/pipermail/paraview/attachments/20181019/eb90f92c/attachment.html>

From david.owens at kitware.com  Mon Oct 22 15:29:47 2018
From: david.owens at kitware.com (David Owens)
Date: Mon, 22 Oct 2018 15:29:47 -0400
Subject: [Paraview] test2
Message-ID: <cd2be882ec88ac529d4ba0acd1e39d6c@mail.gmail.com>

Test2







David Owens

Systems Administrator | Kitware

david.owens at kitware.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://public.kitware.com/pipermail/paraview/attachments/20181022/5e513182/attachment.html>

From david.owens at kitware.com  Mon Oct 22 15:12:41 2018
From: david.owens at kitware.com (David Owens)
Date: Mon, 22 Oct 2018 15:12:41 -0400
Subject: [Paraview] test
Message-ID: <e9b7aacbdfbff5f2660d9feb6c0c9873@mail.gmail.com>

test



David Owens

Systems Administrator | Kitware

david.owens at kitware.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://public.kitware.com/pipermail/paraview/attachments/20181022/091a9987/attachment.html>

From andutta2 at gmail.com  Tue Oct 23 22:27:30 2018
From: andutta2 at gmail.com (Anurag Dutta)
Date: Wed, 24 Oct 2018 07:57:30 +0530
Subject: [Paraview] Opening a PVD file in Paraview
Message-ID: <CAC=naOA6d9q_AeEROmf47YJC9MJrTA-_=BgN15ZQ6XkkFb7zFQ@mail.gmail.com>

Good Morning Community,

I am an OpenSees user and using paraview for the first time.

I did sinusoidal analysis of a single quad element in OpenSees and obtained
a pvd output.

Now, I am not being able to open it in Paraview as when I Open the pvd file
in Paraview it shows some error like unstructured grid something like that.

I am not being able to undertsand it. Please help me . I have attached my
pvd output file here in my mail.

Thank You in advance.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://public.kitware.com/pipermail/paraview/attachments/20181024/84d02c11/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: pvdRes.pvd
Type: application/octet-stream
Size: 440132 bytes
Desc: not available
URL: <https://public.kitware.com/pipermail/paraview/attachments/20181024/84d02c11/attachment-0001.obj>

From cory.quammen at kitware.com  Tue Oct 23 22:36:12 2018
From: cory.quammen at kitware.com (Cory Quammen)
Date: Tue, 23 Oct 2018 22:36:12 -0400
Subject: [Paraview] Opening a PVD file in Paraview
In-Reply-To: <CAC=naOA6d9q_AeEROmf47YJC9MJrTA-_=BgN15ZQ6XkkFb7zFQ@mail.gmail.com>
References: <CAC=naOA6d9q_AeEROmf47YJC9MJrTA-_=BgN15ZQ6XkkFb7zFQ@mail.gmail.com>
Message-ID: <CAB5Fpx7=M5FHH0r4t+95KPgpzwckgQgEJTNso9Z8n_LvheMcJQ@mail.gmail.com>

Hi,

Do you mind posting this question over on https://discourse.paraview.org/ ?
This mailing list is shutting down soon.

Thanks,
Cory

On Tue, Oct 23, 2018 at 10:27 PM Anurag Dutta <andutta2 at gmail.com> wrote:

> Good Morning Community,
>
> I am an OpenSees user and using paraview for the first time.
>
> I did sinusoidal analysis of a single quad element in OpenSees and
> obtained a pvd output.
>
> Now, I am not being able to open it in Paraview as when I Open the pvd
> file in Paraview it shows some error like unstructured grid something like
> that.
>
> I am not being able to undertsand it. Please help me . I have attached my
> pvd output file here in my mail.
>
> Thank You in advance.
> _______________________________________________
> Powered by www.kitware.com
>
> ParaView discussion is moving! Please visit
> https://discourse.paraview.org/ for future posts.
>
> Visit other Kitware open-source projects at
> http://www.kitware.com/opensource/opensource.html
>
> Please keep messages on-topic and check the ParaView Wiki at:
> http://paraview.org/Wiki/ParaView
>
> Search the list archives at: http://markmail.org/search/?q=ParaView
>
> Follow this link to subscribe/unsubscribe:
> https://public.kitware.com/mailman/listinfo/paraview
>


-- 
Cory Quammen
Staff R&D Engineer
Kitware, Inc.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://public.kitware.com/pipermail/paraview/attachments/20181023/f2357b22/attachment.html>

From cory.quammen at kitware.com  Wed Oct 24 11:18:42 2018
From: cory.quammen at kitware.com (Cory Quammen)
Date: Wed, 24 Oct 2018 11:18:42 -0400
Subject: [Paraview] paraview@paraview.org is now retired
Message-ID: <CAB5Fpx4Vvp0a8Dqx5fButwG1sHSM8x87h7hJ0iQayrzSgcPqdg@mail.gmail.com>

Hello ParaView community!

Having served us well since August 2001, the paraview at paraview.org mailing
list is now retired. Please direct new questions and comments to

https://discourse.paraview.org

the new forum for the ParaView community.

While the mailing list is being closed to new messages, the archives will
remain available for searching and browsing:
https://public.kitware.com/pipermail/paraview/

New messages to this mailing list will not be sent out to the list
membership. Instead, an automatic reply directing questions to the
Discourse forum will be sent back to the sender.

Thank you, and see you on Discourse!

-- 
Cory Quammen
Staff R&D Engineer
Kitware, Inc.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://public.kitware.com/pipermail/paraview/attachments/20181024/ccd347b6/attachment.html>

From wascott at sandia.gov  Wed Oct 24 14:01:03 2018
From: wascott at sandia.gov (Scott, W Alan)
Date: Wed, 24 Oct 2018 18:01:03 +0000
Subject: [Paraview] test
Message-ID: <46b45d9be34544b484755c2fea25d9a5@ES01AMSNLNT.srn.sandia.gov>

test

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://public.kitware.com/pipermail/paraview/attachments/20181024/6a513205/attachment.html>