[Paraview] OSPRay textures and materials mapping

Tue May 22 12:34:21 EDT 2018

On Tue, May 22, 2018 at 10:34 AM, Jonathan Borduas <
jonathan.borduas at caboma.com> wrote:

> Hi David,
>
> I was able to complete all the steps. As you probably know, the step four
> was tedious.
>
> However I couldn’t get the result I wanted since I couldn’t assign the
> right textures to the right areas. Is there a mechanism to assign the
> texture just like we assign materials ?
> I guess this is what you mean by “multi-texture isn’t implemented yet”. I
> could probably extract all objects using a connectivity filter and then
> manually assign the textures, but again it is a tedious process for complex
> objects.
>
>
Better to do it in the code. We read in all of the texture coordinates when
we read the .obj and all of the texture files when we read the .mtl -> we
just aren't using the right set of texture coordinates in all cases yet.
That is most of what I mean by multitexture.

Is there a roadmap as to when the multi-texture could be implemented ?
>

I'm hoping for 5.6 in a couple of months time. Although this is important
it may very well slip because of other priorities.

It would be great to have readers that can load texture/Geometry/Materials
> files such as .obj (.mtl and .png), .fbx and .dwg.
>

Agreed.

> Best regards,
>
>
>
> Jonathan Borduas
>
>
>
> *From:* David E DeMarle <dave.demarle at kitware.com>
> *Sent:* Friday, May 18, 2018 10:58 AM
> *To:* Jonathan Borduas <jonathan.borduas at caboma.com>
> *Cc:* paraview at public.kitware.com
> *Subject:* Re: [Paraview] OSPRay textures and materials mapping
>
>
>
> Hi Jonathan.
>
>
>
> Yes you can do that.
>
>
>
> 1) File->Load OSPRay Materials, switch the file type from "OSPRay Material
> Files (*.json)"  to "Wavefront Material FIles (*.mtl)". That will let you
> load all of the materials and textures. They should all show up in the
> Material list.
>
>
>
> 2) The OSPRay Material selection (on Display section of Properties Tab
> advanced) will have all of the individual materials listed in it + a few
> others including "Value Indexed" which is all the way at the bottom. Choose
> that it means "use the categorical color lookup table to decide what
> material to use for each block and or polygon"
>
>
>
> 3) Now change the scalar array to color by to "Material Id", a cell
> aligned array which has the material index to use for each cell.
>
>
>
> 4) Make up a categorical lookup table.
>
>    open spreadsheet view, switch to Field Data, look at the Material Names.
>
>    open the color map editor for the "Material Id", click on Interpret
> Values As Categories and the color will change from bluewhitered to
> extremely YELLOW.
>
>    add annotations, value 0 should be the name of the first entry in the
> Material Names array.
>
>
>
> Notes:
>
> * I have the trivial script somewhere that I used for the SC17 demo that
> makes up the lookup table for you. I'll try and dig that up.
>
> * in general it isn't a 1:1 match between mtl and ospray, in particular
> multitextures are not yet implemented
>
> * along those lines, the mtl parser I whipped up
> $PVSRC/VTK/Rendering/OSPRay/vtkMaterialLibrary::InternalParseMTL
> recognizes a "type" extension outside of mtl that lets you bring in
> ospray's nice materials instead of the default OBJMaterial. Glass and Metal
> are particularly nice.
>
>
>
> At some point I'll get around to making this all automatic. Patches are
> welcome in the meantime.
>
>
>
> good luck
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> David E DeMarle
> Kitware, Inc.
> Principal Engineer
> 21 Corporate Drive
> <https://maps.google.com/?q=21+Corporate+Drive+%0D%0AClifton+Park,+NY+12065&entry=gmail&source=g>
> Clifton Park, NY 12065-8662
> Phone: 518-881-4909
>
>
>
> On Fri, May 18, 2018 at 10:25 AM, Jonathan Borduas <
> jonathan.borduas at caboma.com> wrote:
>
> Hi,
>
> I tried rendering an .obj file running OSPRay that was exported from PCon
> Planner Version 7.7 Patch 1. The original file is a .dwg
>
>
>
> I used the PathThracer mode. However, attached to the .obj there is an
> .mtl file containing 50+ materials and 50+ texture (.png) files.
>
> I didn’t find an automated way to map all polydata of the .obj with their
> respective material and texture file and rendering them using OSPRay.
>
> It seems that I have to assign the material and texture to each polydata
> one-by-one.
>
>
>
> Is there a feature that will automatically map the respective textures and
> materials ?
>
> Here is the link to download the original .dwg file.
> https://www.easterngraphics.com/pcon/en/wp-content/uploads/2015/03/sample_
> apartment.dwg
>
> You will need to export it to .obj using PCon Planner Version 7.7 Patch 1
> with the File/Export/Geometry menu.
> I couldn’t share the .obj  file since the size is 60mb+
>
>
>
> Thank you
>
>
>
> Jonathan Borduas
>
>
>
>
> _______________________________________________
> Powered by www.kitware.com
>
> Visit other Kitware open-source projects at http://www.kitware.com/
> opensource/opensource.html
>
> Please keep messages on-topic and check the ParaView Wiki at:
> http://paraview.org/Wiki/ParaView
>
> Search the list archives at: http://markmail.org/search/?q=ParaView
>
> Follow this link to subscribe/unsubscribe:
> https://public.kitware.com/mailman/listinfo/paraview
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://public.kitware.com/pipermail/paraview/attachments/20180522/5d023ad9/attachment.html>